Brother SA178 Snap On Metal Side Cutter Serger Attachment for up to 5mm Zigzag for PE300S PE400D PE500D, SE-270D, SE-350,

Side Cutter Attachment for Brother PE-300S / PE400D.

For Use With: PE-300S, PE-400D, PE-500D, SE-270D, SE-350,

Sew beautifully finished seams. Use even the wider over-casting stitches on your machine to creates the perfectly cut edge of a serger

Achieve clean-cut edges as machine sews or performs satin stitches

For Use With: NX-400Q, PE-300S, PE-400D

Achieve clean-cut edges as machine sews or performs satin stitches.

Creates the perfect cut edge like a serger or overlock.

Selecting a stitch designated for the Side Cutter allows you to create a beautiful finish without any adjustment on stitch settings.
1. Make a cut about 2 cm (3/4’’) long in the seam line of the fabric.
2. Select a stitch, and adjust settings as needed.
3. Place the cut right section on the top of the foot guide plate.
4. Slip the left side under the presser foot.
5. Lower the presser foot and guide the fabric through the presser foot as it stitches.

For Use With Brother sewing machine models: NX-400Q, PE-300S, PE-400D, PE-400D

Brother part number SA178