 |
December 3, 2024 |
Organ & Schmetz Industrial Commercial Sewing Machine Needles
How often should I replace my sewing needles? Machine needles should be replaced after a maximum sewing time of 8 hours. Replace needles more frequently when sewing synthetic fabric, appliqués or machine embroidery. This will avoid skipped stitches, fabric pulls and frayed threads. Machine needles are designed to break or shear off for the protection of the sewing machine hook mechanism, bobbin case, presser foot, or needle plate. If a needle bends or burrs, do not sew with it. When a machine needle breaks, it is a warning to check the following: ~The needle type and size is correct? ~Is the thread too thick or unsuitable for the needle size and application? ~Is the upper thread feeding freely? ~Are the thread tensions set too tight? ~Does the machine need cleaning? ~Is the correct presser foot fitted? ~Is the correct sewing technique being used? ~Is the fabric being pulled, pushed or dragged during sewing? ~Twin needles usually break due to excessive heat build up. Reduce speeds and avoid prolonged usage.
Thread breakage can be caused by resistance of thread going through the needle eye/size. A good rule of thumb is that thread should not take up more than 1/2 the space of or in the needle eye depending on thread texture. Thread a needle in your hand and let the needle slide down over the length of the thread. If there is too much resistance, it may show up as broken thread due to heat built up in higher speed sewing and/or just restriction and resistance in the needle eye which can cause thread to shred and break. There can be many more reasons for thread shredding and breaking, other than just matching correct needle eye size to thread size. The needle is not a permanent machine part. Needles get dull from use. Needles are meant to be changed. Clues to Changing the Needle - Shredding or broken threads - - Skipped stitches - - Puckered or damaged fabrics - - Wiggly squiggly seams - - Popping, clicking or clunking sound -
Click here for the Organ Needle Buying Guide (PDF) to help you find the right needles for your machine.
ORGAN LEATHER POINT NEEDLES:
Diamond Point and Tri Point are for hard leathers such as belts(cardboard) -- -- -- -- -Diamond Points have a smaller neater hole -- -- -- -- Tri Point hole is like a nail
Narrow Wedge and Reverse Twist are for softer leathers -- -- -- -- -- holes look like a knife slice
SD1 Round Tri Tip/PD -- -- -- -- Smaller, neater holes, occupies about 10% of needle hole
M-LL, M-D, etc - Approximately half the size of standard Wedge and Triangle point needles.
What does needle size #90 mean? The number classification of a needle refers to the diameter of the blade (#90 means .9mm in diameter).
The larger the number, the larger the needle's diameter of the blade. Larger needles also have a larger eye making them ideal for thicker threads. If a thread moves through an eye that is too small for the diameter of the thread, the thread may heat up, skip stitches, shred or break.
Janome 49, 200347008 Push In Needle Threader for All Sewing Machines
 |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Quick easy Needle Threader/Needle Inserter part no.200347008
An ideal accessory for easier threading of your sewing machine needles.
One end of this handy threader has a hook which enables easier threading. The other end has a hole which you can drop your needle into making it easier to hold it whilst you insert it into your machine.
An ideal accessory for easier threading of your sewing machine needles.
One end of this handy threader has a hook which enables easier threading. The other end has a hole which you can drop your needle into making it easier to hold it whilst you insert it into your machine.
Non-US Warranty: 30 days parts and labor.
Organ 129x1 (EEx1, SY4401) Box of 100 Needles for Singer 12W211-224 12K221-224 Pfaff, Industrial Tacker Sewing Machines, Chandler Buttonsewers
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Organ 129x1 EEx1 Pfaff Industrial Sewing Needle 129x1, EEx1, SY4401
Needle for Pfaff industrial sewing machine,
Chandler Buttonsewer (Extra long special applications used)
And for Singer: 12W211 to 224, 12K221 to 224.
Needle for Pfaff industrial sewing machine,
Chandler Buttonsewer (Extra long special applications used)
And for Singer: 12W211 to 224, 12K221 to 224.
Non-US Warranty: 30 days parts and labor.
Amazing (like Janome, Elna) Needle Threader #9100 in Tube, Pushes Thread Loop Through Front of Needle Eye for Sewing, Embroidery, Serger Machines
 32367: Amazing Push In Needle Threader 9100 for Sewing, Embroidery, Serger Machines |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Easily threads sewing machine and serger needles. Comes with handy storage tube that protects the threader.
NEW Type Sewing Machine Needle ThreaderThis video shows how to use the newer type sewing machine needle threader, its really simple to use.
NEW Type Sewing Machine Needle ThreaderThis video shows how to use the newer type sewing machine needle threader, its really simple to use.
Non-US Warranty: 30 days parts and labor.
Organ 135X53 (SY1906) CS Cool Sew Needles Box of 100
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The finish has PTFE (like Teflon) that helps reduce friction and the resulting heat. Vortex needle coolers use cold compressed air to further cool needles
135x53 CS type needles have a round top (no flat side) for industrial upholstery and walking foot machines.
Less Thread Breakage, Less Sticking, Less Downtime.
The CS Cool-Sew finish on the needle surfaces and in the needle’s eye is resistant to sticking. Its finish has a very low friction coefficient, which prevents excessive heat buildup and resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles. Cool-Sew needles are ideal for stitching through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads. When Cool-Sew needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
Regular needles show buildup of sticking fibers while Cool-Sew needle is free of buildup.
As synthetic threads pass through the eye of a needle, they create friction and heat which may melt or snap threads. In some cases, the eye of the needle may be cut. The COOLSEW finished needle eye acts as if eye is lubricated and thereby alleviates the aforementioned problems. As an ordinary chromium plated needle penetrates through synthetic materials, the materials may stick to the needle. This may cause some of the synthetic materials to pass through the needle holes and create undesirable finishes. The sticking to the surface of the needle may also create heat-buildup problems such as melting and machine jamups. The COOL-SEW finish on the needle helps alleviate the sticking and heat-buildup problems.
135x53 CS type needles have a round top (no flat side) for industrial upholstery and walking foot machines.
Less Thread Breakage, Less Sticking, Less Downtime.
The CS Cool-Sew finish on the needle surfaces and in the needle’s eye is resistant to sticking. Its finish has a very low friction coefficient, which prevents excessive heat buildup and resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles. Cool-Sew needles are ideal for stitching through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads. When Cool-Sew needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
Regular needles show buildup of sticking fibers while Cool-Sew needle is free of buildup.
As synthetic threads pass through the eye of a needle, they create friction and heat which may melt or snap threads. In some cases, the eye of the needle may be cut. The COOLSEW finished needle eye acts as if eye is lubricated and thereby alleviates the aforementioned problems. As an ordinary chromium plated needle penetrates through synthetic materials, the materials may stick to the needle. This may cause some of the synthetic materials to pass through the needle holes and create undesirable finishes. The sticking to the surface of the needle may also create heat-buildup problems such as melting and machine jamups. The COOL-SEW finish on the needle helps alleviate the sticking and heat-buildup problems.
Non-US Warranty: 30 days parts and labor.
Organ B27 CS Cool Sew 100 Needles, Industrial Overlock Serger Machines, Interchangeable with MY1023, SY6120, DCx27 Needle Systems
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Specifications
The COOL-SEW* finish was developed to alleviate needle problems resulting from the following situations:(1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
(2) Materials or residue sticking to needle surface or in eye
(3) Excessive sewing thread breakage due to friction in the needle eye
* COOL-SEW is the registered trade mark of Diamond Needle Corp for non-stick finish on sewing machine needles.
As a needle penetrates synthetic, chemically treated or very dense materials a great deal of friction may develop. The needle may get so hot as to actually melt or fuse the sewn material along the seam. The needle’s heat may melt the synthetic sewing thread. When the machine stops, the melted residue may stick to the needle surfaces as it cools.
The nature of some materials makes them rather “sticky.” Materials such as rubber, foam, and synthetic fillers stick to surfaces with which they make contact. They may stick to needles which penetrate through them, even at relative slow sewing speeds. The result may cause undesirable stitch appearances as these materials push through or pull up through needle holes.
Synthetic threads often have a higher friction coefficient than natural fiber threads such as cotton. Passing through the eye of a needle friction develops which causes the needle to heat up. As the speed of the thread passing through the eye of the needle increases, the heat of the needles rises, often to temperatures which will melt the synthetic sewing thread causing it to break.
Chemical coatings or treatments of threads and materials may cause troublesome sewing problems. Bonded layers, waterproofing, dyes, starches, adhesives, sizing's, or other alterations to any fibers may result in needle heat-buildup, sticking problems, excessive thread breakage, and clogged needle eyes.
The COOL-SEW finish needle’s surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles.
When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
Schmetz S135x17, 10/Pk Needles, Size 100/16 Baton Rouge Retail Store
 66039: Schmetz S135x17, 10/Pk Needles, Size 100/16 |
Availability: Retail Store Only Condition: New In Box |
Features
Perfect for medium to heavy fabrics like denim. Comes in packs of 10.
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Dritz D253 Machine Needle Inserter and Needle Threader - Pack of 3
 84426: Dritz D253 Machine Needle Inserter and Needle Threader - Pack of 3 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Holds needle for insertion and removal from machine. Inserter reduces eye strain and threads needles quickly.
Non-US Warranty: 30 days parts and labor.
Quilters Rule QR-COT-L Finger Cots Size Large 10/pkg, Helps Hold Sewing or Hand Needles Between Your Fingers
 85746: Quilters Rule QR-COT-L Finger Cots Size Large 10/pkg, Helps Hold Sewing or Hand Needles Between Your Fingers |
Our Price: $5.99 Prices are subject to change, and only current prices will be honored. Availability: ON BACKORDER Condition: New In Box |
Features
Made of a very thin and flexible latex tissue.
Non-US Warranty: 30 days parts and labor.
Specifications
Great for helping you grip your needle. 10/package.Dritz D812 3 Storage Tubes for up to 20 Needles, with Labels
 87099: Dritz D812 3 Storage Tubes for up to 20 Needles, with Labels |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Storage tubes hold needles up to 2.25in (5.7cm) in length.
Non-US Warranty: 30 days parts and labor.
Specifications
Internal magnet brings needles to the top; holds and fans them out for easy selection. One 20 count package of needles will fit in a single tube. Includes 33 clear labels for all types and sizes of needles.3 count per individual package.
Dritz D253 Machine Needle Inserter and Needle Threader
84426: Dritz D253 Machine Needle Inserter and Needle Threader - Pack of 3 |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Holds needle for insertion and removal from machine. Inserter reduces eye strain and threads needles quickly.
Non-US Warranty: 30 days parts and labor.
Organ 135x53 (SY1906) PD Titanium Sewing Machine Needles Size 11/75, 100/Box (Round Shank)
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 135x53 (SY1906) 100 Chrome Plate Sewing Machine Needles, Choose One Size 10-18
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Please be sure this is the needle type required of your machine before ordering.
Non-US Warranty: 30 days parts and labor.
Organ 135x7PD Titanium BP Ball Point 100 Sewing Machine Needles, Last 3 Times Longer
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
This top quality sewing machine needle will fit many models of Industrial Sewing Machines including :ADLER : 67, 69, 167, 267, 396, 971
ARTISAN : 20-53, 20-93, 196R-5, 518, 2220, 2240, 5110, 5550-H, ZH-305, ZJ-100-J, ZJ-8500-H
BERNINA : 217N-04, 217N-06, 217N-08, 316
BROTHER : B430, B431, B432, B433, B435, B518, B715, B781, B755, B781, B790, B814, B815, B830, B841, B842, B845, B847, B8450, B8750, B872, B875, BAS-301, BAS-310, BAS-320, BAS-330
DURKOPP : 207, 211(most subclasses), 213, 215, 219(most subclasses), 220, 256, 263, 271, 272, 531, 551
GAMMILL : QUILTERS
JUKI : DLU-490, LBH-700 Series, LH-512, LH-515, LH-1152, LK-280, LK-980, LK-984, LK-987, LK-1850, LK-1852, LK-1853, LK-1854, AMS-505A, AMS-260A
MITSUBISHI : DB-120, DB-179, DB-327, DN-260, DN-275, DU-108, LT-200, LT2-220, LT2-230, LT2-250, LZ-200, LZ-750, LZ-760, PB-810-10, PB-820-10
PFAFF : 242, 244, 331, 441R, 442, 443, 461, 481, 483, 491, 493, 563, 1243, 1244, 1290, 1294, 1442, 3701, 3704, 3826, 3834
SINGER : 20U, 61W, 107, 108W, 112, 120U, 121, 132W, 138, 143, 154, 167, 191D, 212, 212G, 220U, 312U, 366K, 371U, 457, 469U, 471U, 591, 660, 691, 770, 771, 2281, 2457, 3457, 3770, 3771, 4000
Organ 16x1 Needles, 100 Round Shank, Sharp or Ball Point for Industrial Singer Pfaff 15 15K 16 16K 17SV 19 19KSV 22-1 32 33 44-1 44-22 44K 56
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
- Box of 100 needles for old Singer and Pfaff Class 16 an 17 industrial machines.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 16x2NW 16X257LR Narrow Wedge Point Leather Vinyl Needles 100
 |
Our Price: $44.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Box Of 16x2, 100 Narrow Wedge Point Needles
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 16x2TRI Triangle Point Leather Needles 100 for Singer Pfaff 16x1 Sewing Machines: 15 15K 16 16K 17SV 19 19KSV 22-1 32 33 44-1 44-22 44K 56
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
- Box Of 100 16x2 Triangle Head Sewing Needles for Leather
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
Available in sizes 9 to 23Organ 16x63 Industrial Sewing Machine Needles Box of 100, Size 21, Round Shank for Singer Model 16 188
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Organ 16x63 Box of 100 Sewing Machine Needles for Singer Model 16 188
Non-US Warranty: 30 days parts and labor.
Organ 1955 PD Titanium Coated BP Ball Point 100 Sewing Machine Needles
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 1955 PD Titanium Coated 100 Needles for Singer 20u Type Industrial Sewing Machines, Interchangeable with 135X65, 135X7, 135X5, DPX5, 134R
 2961: Organ 1955 PD Titanium Coated 100 Needles for Singer 20u Type Industrial Sewing Machines, Interchangeable with 135X65, 135X7, 135X5, DPX5, 134R |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
Alternate Part Numbers: 135X65, 135X7, 135X5, DPX5, 134RGuaranteed to fit Alphasew Sewing Machine Models:
P20U33-3
Guaranteed to fit Pfaff Sewing Machine Models:
145H3B, 463, 563
Guaranteed to fit Singer Sewing Machine Models:
20-33, 20U, 281-1, 281-3, 281-20, 281-21, 281-30, 491D200GA
Alternate Part Numbers: 135X65, 135X7, 135X5, DPX5, 134R
Organ B63 BP Needles for Portable Cover Hem Stitch Machines Box of 100 SIZE 14BP Ball Point Skips Less for Morita 157 Yamata GK257 GK357 Acme RXM-77
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
For Morita 157, Yamata 257 and 357. Acme RXM-77-A Size 14 ball point recommended to help prevent skipped stitches.
Needle Comparison Chart
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ DUx1 Needles (175 88 SY7604) Box of 100 Size 21 Only
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Avaiable in size #21 only.
While the needle is the least expensive component in any embroidery or sewing machine, it is the most important. High quality, ORGAN needles designed in cooperation with the machine builders assure maximum performance, quality, and economy.
ORGAN needles are manufactured from special high carbon, silicon rich steel. We use the latest state-of-the-art production techniques to insure high polished eyes for dependable, smoother stitches, consistent quality, and fewer thread breaks.
The Organ Needle Company works closely with all of Japan's sewing machine builders to design and manufacturer needles for optimal performance. A machine builder cannot afford to buy an inferior needle at any price!
The price quoted is for a pack of 100 needles.
While the needle is the least expensive component in any embroidery or sewing machine, it is the most important. High quality, ORGAN needles designed in cooperation with the machine builders assure maximum performance, quality, and economy.
ORGAN needles are manufactured from special high carbon, silicon rich steel. We use the latest state-of-the-art production techniques to insure high polished eyes for dependable, smoother stitches, consistent quality, and fewer thread breaks.
The Organ Needle Company works closely with all of Japan's sewing machine builders to design and manufacturer needles for optimal performance. A machine builder cannot afford to buy an inferior needle at any price!
The price quoted is for a pack of 100 needles.
Non-US Warranty: 30 days parts and labor.
Organ Home & Industrial Regular Sewing Machine Needles, Box of 1000, 10 boxes of 100, Specify Machine Brand, Name, Model, Needle System#, 1 Size
 |
Our Price: $249.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Specialty needles may be more expensive than the base price for regular household or regular industrial needles. We will confirm any increase in price with you for approval before needles are ordered, processed and shipped
Needle Selection Guide
Needle Comparison Chart
Needle Selection Guide
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ Industrial Sewing Machine Needles, Straight Stitch, Zigzag, Upholstery, Overlock Serger, Coverstitch, Blindstitch, Button, Buttonhole, Emb
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Organ 1000 DBxK5 Chrome Commercial Embroidery Machine Needles Size 11* for Brother 1201, Melco, Happy, Ricoma, Tajima, Baruden, Toyota, SWF, ZSK, MB4
 |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy Texmac, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc. Specify Size 11*
Needle Comparison Chart
Needle Comparison Chart
- Available in sizes 8, 9, 10, 11, 12, 14, 16, 18, 19, 20
- These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles whice home embroidery machines require.
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Organ 113G PD Titanium Coated Industrial Sewing Machine Needles 100/box Specify Size
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 113GHS PD Titanium Coated BP Ball Point Industrial Sewing Machine Needles 100/box Specify Size
 2951: Organ 113GHS PD Titanium Coated BP Ball Point Industrial Sewing Machine Needles 100/box |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 118GBS PD Titanium Coated BP Ball Point Industrial Sewing Machine Needles 100/Box Size 032/80
 2952: Organ 118GBS PD Titanium Coated BP Ball Point Industrial Sewing Machine Needles 100/Box Size 032/80 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ FLx 118GCS Sharp or Ball Point Industrial Sewing Machine Needles 100/Box Size 025(9) 027(10) 029(11) 032(12)
93676: Organ FLx 118GCS Sharp or Ball Point Industrial Sewing Machine Needles 100/Box Size 025(9) 027(10) 029(11) 032(12) |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Available in Regular Sharp for woven fabrics and Ball Point for knits, lycra, Etc.
Ball Point is a slim needle point that works well on delicate knits
Needle Comparison Chart
Ball Point is a slim needle point that works well on delicate knits
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
118GCS needles for Juki 4-needle, Feed-off-the-arm, Flatseamers, Top and Bottom Coverstitch MachineMF-3620 Series
Organ ORG5470-000 Organ Embroidery Assorted Needles Carded/5 Needles, 3-75/11, 2-90/14
 Organ ORG5470-000 Needle Organ Embroidery Assorted Carded/5 Needles, 3-75/11, 2-90/14 |
Our Price: $6.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Organ Carded Embroidery Needles Assorted (3-75/11, 2-90/14) Sold by the Card - 5 Needles per Card.
Non-US Warranty: 30 days parts and labor.
Specifications
Light ball point, special scarf, widened groove and enlarged eye protect threads and materials for attractive embroidered stitches. - Alternative number 5470000BLOrgan ORG5205-090 Needle Organ Ball Point 90/14 Carded/5 Needles
 |
Our Price: $4.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Organ Carded Jersey / Ball Point Needle Size 90/14 - Sold by the Card - 5 Needles per Card.
Non-US Warranty: 30 days parts and labor.
Specifications
Ball Point needles for knitwear, loosely woven and stretch materials. - Alternative number 5205090BLOrgan 124x2 DRx2 100 Needles, Newlong DS-2 -6 DN, Siruba AB Bag Closer Machines
 |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Available in sizes 24(180),25(200),26(230),27(250), & 28(280)
They are used in the following Bag Closing Machines:
Newlong
They are used in the following Bag Closing Machines:
Newlong
- DS-2(2)
- DS-C
- DS-5(2)
- DS-6
- DS-6HS
- DS-6AC
- DN-2HS
- DN-2LHS
Siruba
- AB
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Organ 128G PD Titanium Coated Industrial Sewing Machine Needles 100/box
 |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 128GAS-NY2-PD Bulk Box of 100 Industrial Machine Needles, Prevents Skipped Stitches, Regular Point, Titanium Finish, Size 65-140
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Intensive studies of skipped stitches reveal the problematic factors related to needles.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
- Organ 128GAS-NY2-PD Needles available in Regular Point only.
NY2 Series Countermeasures for Skipped Stitches:
Tapered Blade Design
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf
-
New Shape for Needle's Eye
-
Slim Needle Point
- Works on Upholstery Machines, Straight-Stitch and Zig-Zag Industrial Machines.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
NY2 Series Countermeasures for Skipped Stitches:Tapered Blade Design
- Skipped stitches occur when the distance between the needle and the point of the looper is too great. Instead of employing the regular double-swaged blade, Organ's NY2 Series has a tapered blade design intended to dramatically reduce the needle's flexibility during high-speed sewing conditions.
Cliff Scarf
- Increases in sewing machine speed and the diverse assortment of sewing threads require an optimally designed needle scarf to form the proper and stable thread loop that forms a stitch. The NY2 Series has a long, deep scarf called a "Cliff Scarf," that is designed to facilitate the reliability of picking up thread and avoiding skipped stitches.
Shape of Needle's Eye
- The shape of the needle's eye must allow proper spacing for the sewing thread. The NY2 Series has designed the needle's eye as the optimal "thread guide" to feed the thread to the stitch.
Slim Needle Point
- The slim point of NY2 Series needles drastically reduces penetration resistance. The design minimizes needle deflection that causes skipped stitches especially in thick and hard materials. The slim point has an adeed advantage in also being effective at reducing yarn breakage.
Organ 128GBS PD Titanium Coated BP Ball Point Industrial Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 128GBS-NY2-PD 100 Count of Industrial Machine Needles
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Intensive studies of skipped stitches reveal the problematic factors related to needles.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
- Organ 128GBS-NY2-PD Needles available in Ball Point only.
NY2 Series Countermeasures for Skipped Stitches:
-
Tapered Blade Design
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf
-
New Shape for Needle's Eye
-
Slim Needle Point
- Works on Upholstery Machines, Straight-Stitch and Zig-Zag Industrial Machines.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
NY2 Series Countermeasures for Skipped Stitches:-
Tapered Blade Design. Skipped stitches occur when the distance between the needle and the point of the looper is too great. Instead of employing the regular double-swaged blade, Organ's NY2 Series has a tapered blade design intended to dramatically reduce the needle's flexibility during high-speed sewing conditions.
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf. Increases in sewing machine speed and the diverse assortment of sewing threads require an optimally designed needle scarf to form the proper and stable thread loop that forms a stitch. The NY2 Series has a long, deep scarf called a "Cliff Scarf," that is designed to facilitate the reliability of picking up thread and avoiding skipped stitches.
-
Shape of Needle's Eye. The shape of the needle's eye must allow proper spacing for the sewing thread. The NY2 Series has designed the needle's eye as the optimal "thread guide" to feed the thread to the stitch.
- Slim Needle Point. The slim point of NY2 Series needles drastically reduces penetration resistance. The design minimizes needle deflection that causes skipped stitches especially in thick and hard materials. The slim point has an adeed advantage in also being effective at reducing yarn breakage.
Organ 128x22 Tri Point Leather point needle for Singer 51W (51W55) box of 100
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Ships by USPS
Non-US Warranty: 30 days parts and labor.
Organ 134BP Ball Point PD Perfect Durability Titanium Coat 100 Needles
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 134-35R PD Titanium Coat Industrial Sewing Machine Needles DPx35R SY7225 2134-35R, Box of 100, Pfaff 1245 Durkopp Adler Walking Foot and Bartack
 |
Our Price: $44.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Organ Needle for all industrial Walking Foot Double Needle & Bartack Sewing Machine
ADLER : 067, 068, 167, 168, 169, 204, 267, 268, 269, 367, 396, 467, 973
PFAFF : 34, 36, 37, 38, 142, 145, 146, 195, 196, 238, 245, 246, 333, 335, 337, 345, 346, 441, 442, 443, 444, 448, 451, 457, 481, 541, 542, 543, 544, 545, 546, 555, 594, 595, 596, 646, 1224, 1244, 1245, 1295, 1296, 1299, 1442, 1425, 1426, 1427, 1442, 1445, 1446, 1455, 3114, 3116, 3302, 3303, 3304, 3334, 3542, 3561, 3564, 3571, 3573, 3802, 3809, 3812, 3821, 3834, 3836, 3840, 4141, 4143, 4145, 4335. Durkopp: 291
ADLER : 067, 068, 167, 168, 169, 204, 267, 268, 269, 367, 396, 467, 973
PFAFF : 34, 36, 37, 38, 142, 145, 146, 195, 196, 238, 245, 246, 333, 335, 337, 345, 346, 441, 442, 443, 444, 448, 451, 457, 481, 541, 542, 543, 544, 545, 546, 555, 594, 595, 596, 646, 1224, 1244, 1245, 1295, 1296, 1299, 1442, 1425, 1426, 1427, 1442, 1445, 1446, 1455, 3114, 3116, 3302, 3303, 3304, 3334, 3542, 3561, 3564, 3571, 3573, 3802, 3809, 3812, 3821, 3834, 3836, 3840, 4141, 4143, 4145, 4335. Durkopp: 291
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 134-35R-NY2-PD Titanium Coated Industrial Sewing Machine Needles DPx35R SY7225 2134-35R, Box of 100 for Pfaff Durkopp Adler Walking Foot Bartack
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Organ Needle for all industrial Walking Foot Double Needle & Bartack Sewing Machine
ADLER : 067, 068, 167, 168, 169, 204, 267, 268, 269, 367, 396, 467, 973
PFAFF : 34, 36, 37, 38, 142, 145, 146, 195, 196, 238, 245, 246, 333, 335, 337, 345, 346, 441, 442, 443, 444, 448, 451, 457, 481, 541, 542, 543, 544, 545, 546, 555, 594, 595, 596, 646, 1224, 1244, 1245, 1295, 1296, 1299, 1442, 1425, 1426, 1427, 1442, 1445, 1446, 1455, 3114, 3116, 3302, 3303, 3304, 3334, 3542, 3561, 3564, 3571, 3573, 3802, 3809, 3812, 3821, 3834, 3836, 3840, 4141, 4143, 4145, 4335. Durkopp: 291
ADLER : 067, 068, 167, 168, 169, 204, 267, 268, 269, 367, 396, 467, 973
PFAFF : 34, 36, 37, 38, 142, 145, 146, 195, 196, 238, 245, 246, 333, 335, 337, 345, 346, 441, 442, 443, 444, 448, 451, 457, 481, 541, 542, 543, 544, 545, 546, 555, 594, 595, 596, 646, 1224, 1244, 1245, 1295, 1296, 1299, 1442, 1425, 1426, 1427, 1442, 1445, 1446, 1455, 3114, 3116, 3302, 3303, 3304, 3334, 3542, 3561, 3564, 3571, 3573, 3802, 3809, 3812, 3821, 3834, 3836, 3840, 4141, 4143, 4145, 4335. Durkopp: 291
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Intensive studies of skipped stitches reveal the problematic factors related to needles.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
- Organ 134-35R-NY2-PD Needles available in Regular Point only.
NY2 Series Countermeasures for Skipped Stitches:
-
Tapered Blade Design
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf
-
New Shape for Needle's Eye
-
Slim Needle Point
- Works on Upholstery Machines, Straight-Stitch and Zig-Zag Industrial Machines.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
NY2 Series Countermeasures for Skipped Stitches:-
Tapered Blade Design. Skipped stitches occur when the distance between the needle and the point of the looper is too great. Instead of employing the regular double-swaged blade, Organ's NY2 Series has a tapered blade design intended to dramatically reduce the needle's flexibility during high-speed sewing conditions.
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf. Increases in sewing machine speed and the diverse assortment of sewing threads require an optimally designed needle scarf to form the proper and stable thread loop that forms a stitch. The NY2 Series has a long, deep scarf called a "Cliff Scarf," that is designed to facilitate the reliability of picking up thread and avoiding skipped stitches.
-
Shape of Needle's Eye. The shape of the needle's eye must allow proper spacing for the sewing thread. The NY2 Series has designed the needle's eye as the optimal "thread guide" to feed the thread to the stitch.
- Slim Needle Point. The slim point of NY2 Series needles drastically reduces penetration resistance. The design minimizes needle deflection that causes skipped stitches especially in thick and hard materials. The slim point has an adeed advantage in also being effective at reducing yarn breakage.
Organ 134R Regular Sharp PD Perfect Durability Titanium Coat 100 Needles
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 134x1 needles for Singer 121W,122W1-W3, 127W(except WSV) Sewing Machines, box of 100 size 20/125 Only
 |
Our Price: $49.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Organ 134x1 needles for Singer 121W,122W1-W3, 127W(except WSV) Sewing Machines, box of 100 size 20/125 Only
Non-US Warranty: 30 days parts and labor.
Organ 135x16Tri Triangle Point Leather Sewing Machine 100 Needles, Size 24-14, 20-24 Recommended for Upholstery Machines that use 135x17 Needles
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
*Choose One Size per Box for DPx16Tri 135x16Tri for DPx17, 135x17 Regular Needle Walking Foot Upholstery Sewing Machines, slices through the leather like materials while making a cleanly cut needle hole.
The 135x16TRI(Triangular Point) are available in 14,16,18,19,20,21,22,23,& 24
The Diamond Point and TRI Points are generally used on harder leathers like belts. The Diamond Point has a smaller hole than the TRI.
The Narrow Wedge are generally used on softer leathers
A standard “set” or “sharp” point needle punches its way through leather like materials which may make irregularly or undesirably shaped needle holes. The wedge point “slices” through the leather like materials while making a cleanly cut needle hole.
The 135x16TRI(Triangular Point) are available in 14,16,18,19,20,21,22,23,& 24
The Diamond Point and TRI Points are generally used on harder leathers like belts. The Diamond Point has a smaller hole than the TRI.
The Narrow Wedge are generally used on softer leathers
A standard “set” or “sharp” point needle punches its way through leather like materials which may make irregularly or undesirably shaped needle holes. The wedge point “slices” through the leather like materials while making a cleanly cut needle hole.
Non-US Warranty: 30 days parts and labor.
Specifications
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing MachinesCompatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Organ 135x17 100 Needles, Choose Size 20-25 for Walking Foot Upholstery Machines and Thread Sizes
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Needle System 135x17 for Upholstery or 135x16 for Leather/Vinyl Industrial Sewing Machines. Upholstery threads need size 20 and up. Match needle size to thread size. You can specify regular sharp point for stable or woven fabrics, or ball point for stretchy fabrics. Sharps available up to size 25. BP Ball Point available in sizes up to 24.
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Non-US Warranty: 30 days parts and labor.
Organ 135x17-NY2PD Titanium Coat 100 Sewing Machine Needles, Size 20-25 Recommended for Walking Foot Upholstery Machines and Threads #69 to 270
 Organ 135x17-NY2PD Titanium Coat 100 Sewing Machine Needles, Size 20-25 Recommended for Walking Foot Upholstery Machines and Threads #69 to 270 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Intensive studies of skipped stitches reveal the problematic factors related to needles.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
- Organ 135x17-NY2-PD Needles available in Regular Point only.
NY2 Series Countermeasures for Skipped Stitches:
Tapered Blade Design
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf
-
New Shape for Needle's Eye
Slim Needle Point
- Works on Upholstery Machines, Straight-Stitch and Zig-Zag Industrial Machines.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
NY2 Series Countermeasures for Skipped Stitches:-
Tapered Blade Design. Skipped stitches occur when the distance between the needle and the point of the looper is too great. Instead of employing the regular double-swaged blade, Organ's NY2 Series has a tapered blade design intended to dramatically reduce the needle's flexibility during high-speed sewing conditions.
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf. Increases in sewing machine speed and the diverse assortment of sewing threads require an optimally designed needle scarf to form the proper and stable thread loop that forms a stitch. The NY2 Series has a long, deep scarf called a "Cliff Scarf," that is designed to facilitate the reliability of picking up thread and avoiding skipped stitches.
-
Shape of Needle's Eye. The shape of the needle's eye must allow proper spacing for the sewing thread. The NY2 Series has designed the needle's eye as the optimal "thread guide" to feed the thread to the stitch.
-
Slim Needle Point. The slim point of NY2 Series needles drastically reduces penetration resistance. The design minimizes needle deflection that causes skipped stitches especially in thick and hard materials.
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing Machines
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Organ 135x17PD Titanium Coat 100 Sewing Machine Needles Last 3x Longer, Choose Size 24 to 14, Recommend 20-24 for Upholstery Fabrics and Thread Sizes
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 135x17 needles have round top for certain industrial machines.
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing MachinesCompatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Organ 135x5 100 Interchangable with Singer 20U Type Sewing Machine Needles: 1901, 1955, 135x7, 135x8, DPx5
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The difference between the 1901 (135x5) and the 1910 (135x9) needles is that the 135x9 needles has just a slightly shorter point by about 0.5 or 0.8 mm. Same other dimensions. The 1910 & the 1901 are not the same although they are fundamentally the same.The only difference is the length of the point & of the shank There used to be more of a difference as the needles were changed from what they originally were.The 1901 used to be the same as 135x7(DPX7). This was when 135x5(DPx5) was slightly different than the 135x7(DPx7) When the 135x5 & 135x7 were made interchangeable with each other the 1901 became interchangeable with the 135x5 & 135x7 too The 1910 are the same as 135x9, 134K & PF797 Singer got away from using the 135x9 on the 20U and started using the more common 135x5/135x7. Diamond Organ Needle Co.
Sewing machine manufacturers use different needle style numbers for the same exact needles
*A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.
Sewing machine manufacturers use different needle style numbers for the same exact needles
*A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
# Singer Size 8 (Metric Size 60)# Singer Size 9 (Metric Size 65)
# Singer Size 10 (Metric Size 70)
# Singer Size 11 (Metric Size 75)
# Singer Size 12 (Metric Size 80)
# Singer Size 14 (Metric Size 90)
# Singer Size 16 (Metric Size 100)
# Singer Size 18 (Metric Size 110)
# Singer Size 19 (Metric Size 120)
# Singer Size 20 (Metric Size 125)
# Singer Size 21 (Metric Size 130)
# Singer Size 22 (Metric Size 140)
# Singer Size 23 (Metric Size 160)
# Singer Size 24 (Metric Size 180)
# Singer Size 25 (Metric Size 200)
Organ 135x5 PD Titanium Coat BP Ball Point Sewing Needles 100
 2983: Organ 135x5 PD Titanium Coat BP Ball Point Sewing Needles 100 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The difference between the 1901 (135x5) and the 1910 (135x9) needles is that the 135x9 needles has just a slightly shorter point by about 0.5 or 0.8 mm. Same other dimensions.
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or sewing and penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium coated needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 135x5 PD Box 100 Sewing Needles Titanium Coated Lasts 3x Longer
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The difference between the 1901 (135x5) and the 1910 (135x9) needles is that the 135x9 needles has just a slightly shorter point by about 0.5 or 0.8 mm. Same other dimensions and interchangability.
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- Whether embroidering large stitch designs or sewing and penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium coated needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 135x5 SK1 Crank Chrome Longarm Quilting Machine Needles 100 (10x10 Packs) Size 18 Recommended for Free Motion
 21968: Organ 135x5 SK1 Crank Chrome Longarm Quilting Machine Needles 100 (10x10 Packs) |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
ORGAN “SK1” needles have an improved “crank” design scarf used for quilting machines. These round shank needles correspond to “MR” needles.
The Organ "SK1" Crank Design Needles correspond to the Groz-Beckert "SAN11" needles. In fact, the ORGAN "SK1" needles have some features that prove to be an improvement over SAN11 and MR type needles.
These type of "Crank Design Needles" are very popular with Long Arm Quilting machines. The special scarf design is ideal for multi-directional stitching to avoid skipped stitches. The chief advantage about the ORGAN SK1 needles is that it makes a smaller stitch hole in the quilting materials and thus avoids fillers from bleeding out of the needle holes.
Changing the Groz Beckert, Organ or Schmetz 135x5 DPx5 needle Size 16 or 18 for Grace Qnique 14+ 15R 15M 15S Q19 Q21 Quilting Macines
The Organ "SK1" Crank Design Needles correspond to the Groz-Beckert "SAN11" needles. In fact, the ORGAN "SK1" needles have some features that prove to be an improvement over SAN11 and MR type needles.
These type of "Crank Design Needles" are very popular with Long Arm Quilting machines. The special scarf design is ideal for multi-directional stitching to avoid skipped stitches. The chief advantage about the ORGAN SK1 needles is that it makes a smaller stitch hole in the quilting materials and thus avoids fillers from bleeding out of the needle holes.
Changing the Groz Beckert, Organ or Schmetz 135x5 DPx5 needle Size 16 or 18 for Grace Qnique 14+ 15R 15M 15S Q19 Q21 Quilting Macines
Non-US Warranty: 30 days parts and labor.
Organ 135x5-NY2PD 100 Count of Industrial Sewing Machine Needles Size 9-22 , Prevents Skipped Stitches, Choose Regular or Ball Point, Titanium Finish
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Intensive studies of skipped stitches reveal the problematic factors related to needles.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
NY2 Series Countermeasures for Skipped Stitches:
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
NY2 Series Countermeasures for Skipped Stitches:
-
Tapered Blade Design
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf
-
New Shape for Needle's Eye
-
Slim Needle Point
- Works on Upholstery Machines, Straight-Stitch and Zig-Zag Industrial Machines.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
NY2 Series Countermeasures for Skipped Stitches:Tapered Blade Design
- Skipped stitches occur when the distance between the needle and the point of the looper is too great. Instead of employing the regular double-swaged blade, Organ's NY2 Series has a tapered blade design intended to dramatically reduce the needle's flexibility during high-speed sewing conditions.
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
Cliff Scarf
- Increases in sewing machine speed and the diverse assortment of sewing threads require an optimally designed needle scarf to form the proper and stable thread loop that forms a stitch. The NY2 Series has a long, deep scarf called a "Cliff Scarf," that is designed to facilitate the reliability of picking up thread and avoiding skipped stitches.
Shape of Needle's Eye
- The shape of the needle's eye must allow proper spacing for the sewing thread. The NY2 Series has designed the needle's eye as the optimal "thread guide" to feed the thread to the stitch.
Slim Needle Point
- The slim point of NY2 Series needles drastically reduces penetration resistance. The design minimizes needle deflection that causes skipped stitches especially in thick and hard materials. The slim point has an adeed advantage in also being effective at reducing yarn breakage.
Organ 135x5-NY2-SD1, PD Titanium, 100 Round Shank Industrial Sewing Machine Leather Type Needles, Sizes 11 to 23, Regular or Ball Point.
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
When you look at the point with your naked eye, it looks like a regular round point needle. When you use a magnifying lens and look at the point you will see a tiny triangle point.
Made for Quilting on Soft Leather:
When quilting you are doing "multi-directional" sewing. Using a wedge point will create irregular stitches because of the redirection of the sewing and the fixed angle of the wedge point.
The SD1 point will give you assistance to cut into the leather. The NY2 slender shape to the point will make a smaller hole, and the combination will avoid "bursting" holes through the leather.
(The PD/titanium finish makes the needle point more resistant to wear so it retains its sharpness longer).
The combination of the NY2 and SD1 point will give you the best performance quilting through leather.
The most likely needle sizes for quilting leather will be #18, 19, 20, 21, 22.
What does Needle System NY2 Stand For?(.PDF)
What does Needle System SD1 Stand For?(.PDF)
Made for Quilting on Soft Leather:
When quilting you are doing "multi-directional" sewing. Using a wedge point will create irregular stitches because of the redirection of the sewing and the fixed angle of the wedge point.
The SD1 point will give you assistance to cut into the leather. The NY2 slender shape to the point will make a smaller hole, and the combination will avoid "bursting" holes through the leather.
(The PD/titanium finish makes the needle point more resistant to wear so it retains its sharpness longer).
The combination of the NY2 and SD1 point will give you the best performance quilting through leather.
The most likely needle sizes for quilting leather will be #18, 19, 20, 21, 22.
What does Needle System NY2 Stand For?(.PDF)
What does Needle System SD1 Stand For?(.PDF)
Non-US Warranty: 30 days parts and labor.
Organ 135x5SK1-T (Schmetz 134R MR) Crank Design Titanium Needles 100 for Longarm Quilting Machines
 21969: Organ 135x5SK1-T (Schmetz 134R MR) Crank Design Titanium Needles 100 for Longarm Quilting Machines |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
ORGAN “SK1” needles have an improved “crank” design scarf used for quilting machines. These round shank needles correspond to “MR” needles.
The Organ "SK1" Crank Design Needles correspond to the Groz-Beckert "SAN11" needles. In fact, the ORGAN "SK1" needles have some features that prove to be an improvement over SAN11 and MR type needles.
These type of "Crank Design Needles" are very popular with Long Arm Quilting machines. The special scarf design is ideal for multi-directional stitching to avoid skipped stitches. The chief advantage about the ORGAN SK1 needles is that it makes a smaller stitch hole in the quilting materials and thus avoids fillers from bleeding out of the needle holes.
Changing the Groz Beckert, Organ or Schmetz 135x5 DPx5 needle Size 16 or 18 for Grace Qnique 14+ 15R 15M 15S Q19 Q21 Quilting Macines
The Organ "SK1" Crank Design Needles correspond to the Groz-Beckert "SAN11" needles. In fact, the ORGAN "SK1" needles have some features that prove to be an improvement over SAN11 and MR type needles.
These type of "Crank Design Needles" are very popular with Long Arm Quilting machines. The special scarf design is ideal for multi-directional stitching to avoid skipped stitches. The chief advantage about the ORGAN SK1 needles is that it makes a smaller stitch hole in the quilting materials and thus avoids fillers from bleeding out of the needle holes.
Changing the Groz Beckert, Organ or Schmetz 135x5 DPx5 needle Size 16 or 18 for Grace Qnique 14+ 15R 15M 15S Q19 Q21 Quilting Macines
Non-US Warranty: 30 days parts and labor.
Organ 135x65 PD Titanium Coated BP Ball Point Sewing Machine Needles
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 135x65PD 100 Titanium Coated Needles, Industrial Sewing Machines
 Organ 135x65PD |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
- for Industrial Straight Stitch, Bartack
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
- Replaced and interchangable by 135x5 135x7 needle systems
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
- Needle for All Industrial Bartack AND Straight stitch single needle sewing machines, Singer, Brother, Juki, Pfaff, Alder, Durkopp.......
ADLER : 67, 69, 167, 267, 396, 971
ARTISAN : 20-53, 20-93, 196R-5, 518, 2220, 2240, 5110, 5550-H, ZH-305, ZJ-100-J, ZJ-8500-H
BERNINA : 217N-04, 217N-06, 217N-08, 316
BROTHER : B430, B431, B432, B433, B435, B518, B715, B781, B755, B781, B790, B814, B815, B830, B841, B842, B845, B847, B8450, B8750, B872, B875, BAS-301, BAS-310, BAS-320, BAS-330
DURKOPP : 207, 211(most subclasses), 213, 215, 219(most subclasses), 220, 256, 263, 271, 272, 531, 551
GAMMILL : QUILTERS
JUKI : DLU-490, LBH-700 Series, LH-512, LH-515, LH-1152, LK-280, LK-980, LK-984, LK-987, LK-1850, LK-1852, LK-1853, LK-1854, AMS-505A, AMS-260A
MITSUBISHI : DB-120, DB-179, DB-327, DN-260, DN-275, DU-108, LT-200, LT2-220, LT2-230, LT2-250, LZ-200, LZ-750, LZ-760, PB-810-10, PB-820-10
PFAFF : 242, 244, 331, 441R, 442, 443, 461, 481, 483, 491, 493, 563, 1243, 1244, 1290, 1294, 1442, 3701, 3704, 3826, 3834
SINGER : 20U, 61W, 107, 108W, 112, 120U, 121, 132W, 138, 143, 154, 167, 191D, 212, 212G, 220U, 312U, 366K, 371U, 457, 469U, 471U, 591, 660, 691, 770, 771, 2281, 2457, 3457, 3770, 3771, 4000
Organ 135x7 PD Titanium Coated 100 Industrial Sewing Machine Needles, Last 3 Times Longer
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
135X7 Needles are also sold under these style number needle systems : 134, 134R, 135X5, 135X7, 1955, DPX5, DPX7, DPX134, SY1901, SY1905, SY1955 and are interchangable
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
This top quality sewing machine needle will fit many models of Industrial Sewing Machines including :ADLER : 67, 69, 167, 267, 396, 971
ARTISAN : 20-53, 20-93, 196R-5, 518, 2220, 2240, 5110, 5550-H, ZH-305, ZJ-100-J, ZJ-8500-H
BERNINA : 217N-04, 217N-06, 217N-08, 316
BROTHER : B430, B431, B432, B433, B435, B518, B715, B781, B755, B781, B790, B814, B815, B830, B841, B842, B845, B847, B8450, B8750, B872, B875, BAS-301, BAS-310, BAS-320, BAS-330
DURKOPP : 207, 211(most subclasses), 213, 215, 219(most subclasses), 220, 256, 263, 271, 272, 531, 551
GAMMILL : QUILTERS
JUKI : DLU-490, LBH-700 Series, LH-512, LH-515, LH-1152, LK-280, LK-980, LK-984, LK-987, LK-1850, LK-1852, LK-1853, LK-1854, AMS-505A, AMS-260A
MITSUBISHI : DB-120, DB-179, DB-327, DN-260, DN-275, DU-108, LT-200, LT2-220, LT2-230, LT2-250, LZ-200, LZ-750, LZ-760, PB-810-10, PB-820-10
PFAFF : 242, 244, 331, 441R, 442, 443, 461, 481, 483, 491, 493, 563, 1243, 1244, 1290, 1294, 1442, 3701, 3704, 3826, 3834
SINGER : 20U, 61W, 107, 108W, 112, 120U, 121, 132W, 138, 143, 154, 167, 191D, 212, 212G, 220U, 312U, 366K, 371U, 457, 469U, 471U, 591, 660, 691, 770, 771, 2281, 2457, 3457, 3770, 3771, 4000
Organ 135x7SK1 Longarm Quilting 100 Machine Needles, Crank Style Shaft
 ORGAN “SK1” needles have an improved “crank” design scarf used for quilting machines. These round shank needles correspond to “MR” needles. |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
ORGAN “SK1” needles have an improved “crank” design scarf used for quilting machines. These round shank needles correspond to “MR” needles.
"The main advantage that the Organ 135x7SK1 has over the MR/SAN11 in Long Arm Quilting is that they make smaller needle holes, with cleaner stitches, and less chance of needle hole “overflow”. Organ brought the 135x7SK1 out as an improvement of the Singer 3355-01 MR needles and Groz Beckert 135x7-SAN11. Groz Beckert has now replaced the 3355-01 MR. We are selling more and more of the 135x7SK1 in all trades now." Organ Needle
Can also replace with interchangeable needle systems: 1901 1955 SY1995 SY6790 34 134R 135X5 135x7 DPX5 DPx7 DPx134.
Please Note: Juki TL2200QVP, Handi Quilter and Babylock Longarm Quilting Machines use 134 Needles only, without crank style needle shafts which can affect factory set needle clearances. Crank Needles can also affect the hook timing as well as needle clearance to hook on these machines.
In-house comparisons reveal 30% reduction in the occurrence of skipped stitches.
Additional benefit over other crank-form needles is the
reduction of sewing thread breakage.
"The main advantage that the Organ 135x7SK1 has over the MR/SAN11 in Long Arm Quilting is that they make smaller needle holes, with cleaner stitches, and less chance of needle hole “overflow”. Organ brought the 135x7SK1 out as an improvement of the Singer 3355-01 MR needles and Groz Beckert 135x7-SAN11. Groz Beckert has now replaced the 3355-01 MR. We are selling more and more of the 135x7SK1 in all trades now." Organ Needle
Can also replace with interchangeable needle systems: 1901 1955 SY1995 SY6790 34 134R 135X5 135x7 DPX5 DPx7 DPx134.
Please Note: Juki TL2200QVP, Handi Quilter and Babylock Longarm Quilting Machines use 134 Needles only, without crank style needle shafts which can affect factory set needle clearances. Crank Needles can also affect the hook timing as well as needle clearance to hook on these machines.
In-house comparisons reveal 30% reduction in the occurrence of skipped stitches.
Additional benefit over other crank-form needles is the
reduction of sewing thread breakage.
Non-US Warranty: 30 days parts and labor.
Specifications
Please click here for additional information (.PDF)Organ 135x7SK1 PD Titanium Coated Longarm Quilting Machine 100 Needles, Superior to same Needle Systems S134R, 134R, 135x5, 135x7, 797, SY1955, DPx5
Organ 135x7SK1 PD Titanium Coated Longarm Quilting Machine 100 Needles, Superior to same Needle Systems S134R, 134R, 135x5, 135x7, 797, SY1955, DPx5 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
ORGAN “SK1” needles have an improved “crank” design scarf used for quilting machines. These round shank needles correspond to “MR” needles.
The main advantage that the Organ 135x7SK1 has over the MR/SAN11 in Long Arm Quilting is that they make smaller needle holes, with cleaner stitches, and less chance of needle hole “overflow”. Organ brought the 135x17SK1 out as an improvement of the Singer 3355-01 MR needles and Groz Beckerts 135x17-SAN11 Groz Beckert has now replaced the 3355-01 MR with. We are selling more and more of the 135x17SK1 in all trades now. From Organ Needles
Can also replace with interchangeable needle systems: 1901 1955 SY1995 SY6790 34 134R 135X5 135x7 DPX5 DPx7 DPx134.
In-house comparisons reveal 30% reduction in the occurrence of skipped stitches.
Additional benefit over other crank-form needles is the reduction of sewing thread breakage.
The main advantage that the Organ 135x7SK1 has over the MR/SAN11 in Long Arm Quilting is that they make smaller needle holes, with cleaner stitches, and less chance of needle hole “overflow”. Organ brought the 135x17SK1 out as an improvement of the Singer 3355-01 MR needles and Groz Beckerts 135x17-SAN11 Groz Beckert has now replaced the 3355-01 MR with. We are selling more and more of the 135x17SK1 in all trades now. From Organ Needles
Can also replace with interchangeable needle systems: 1901 1955 SY1995 SY6790 34 134R 135X5 135x7 DPX5 DPx7 DPx134.
In-house comparisons reveal 30% reduction in the occurrence of skipped stitches.
Additional benefit over other crank-form needles is the reduction of sewing thread breakage.
Non-US Warranty: 30 days parts and labor.
Specifications
Please click here for additional information (.PDF)Organ 135x8NW Wedge Point Leather Needles for 135x5 Needle Machines
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Organ 142x5 (1778, DOx5) PD Titanium Sewing Machine Needles Size 21/130, PD Perfect Durability Lasts 3 Times Longer - Box of 100 in Packs of 10
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
While the needle is the least expensive component in any embroidery or sewing machine, it is the most important. High quality, ORGAN needles designed in cooperation with the machine builders assure maximum performance, quality, and economy.ORGAN needles are manufactured from special high carbon, silicon rich steel. We use the latest state-of-the-art production techniques to insure high polished eyes for dependable, smoother stitches, consistent quality, and fewer thread breaks.
The Organ Needle Company works closely with all of Japan's sewing machine builders to design and manufacturer needles for optimal performance. A machine builder cannot afford to buy an inferior needle at any price!
The price quoted is for a pack of 100 needles.
Organ 149x3 PD Titanium Coated BP Ball Point Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 149x3 PD Titanium Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 149x5 (62x45) PD Titanium Coated Sewing Machine Needles 100/Box
 |
Our Price: $54.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer
- Because titanium needles are made of stronger material they will last longer on tougher applications
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 149x7 PD Titanium Coated Industrial Sewing Machine Needles 100/box Size 20/125
 Organ 149x7 PD Titanium Coated Industrial Sewing Machine Needles 100/box Size 20/125 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 154GAS UY154 SY1433 UOx154 50 Pearlstitch Curved Needles for Singer Overlock 990B 991B 993BX 460/15, Pegasus Eser 256, Union Special 39500 39600
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Pack of 50 Curved Needles for Singer Overlock machine 460/15
Needle for All Industrial Serger / Overlock Sewing Machine,
For Pegasus E-series 256
For Singer Class: 990B, 991B, 993BX
For Union Special Class: 39500, 39600
154GAS, UY154, SY1433
Needle for All Industrial Serger / Overlock Sewing Machine,
For Pegasus E-series 256
For Singer Class: 990B, 991B, 993BX
For Union Special Class: 39500, 39600
154GAS, UY154, SY1433
Non-US Warranty: 30 days parts and labor.
Specifications
We stock the 154GAS as follows:UN/Sing/Metric
-022/8/60
-025/9/65
-027/10/70
-029/11/75
-032/12/80
-036/14/90
-040/16/100
-044/18/110
-049/20/125
-054/22/140
We also have the Ball Point version which is 154GHS in all of the above sizes except for 049/20/125 & 054/22/140
Organ 16X231 PD Titanium Coated Box of 100 Sharp Needles, 10Pk x10
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 16X231CS Cool Sew 100 Needles Size 90/14 for High Speed Industrial Sewing Machines
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The Cool-Sew finish was developed to alleviate needle problems resulting from the following situations:
1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
2) Materials or residue sticking to needle surface or in eye
3) Excessive sewing thread breakage due to friction in the needle eye
The COOL-SEW finish needle’s surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles.
When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
2) Materials or residue sticking to needle surface or in eye
3) Excessive sewing thread breakage due to friction in the needle eye
The COOL-SEW finish needle’s surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles.
When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
Non-US Warranty: 30 days parts and labor.
Organ 16X231PD 100 Titanium Coat BP Ball Point Sewing Machine Needles for High Speed Commercial Straight Stitch
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 16X95 PD Titanium Coated Box of 100 Sewing Machine Needles, Last 3 Times Longer, Interchangeable with DBx1, 16x257, 16x231
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
For:
BROTHER Models; 735, 755, 652, 737
CONSEW Models; 210, 215, 216, 217, 220, 230, 7630R-1
JUKI Models; DDL 201, 227, 555, 5530, 5550, 8500, 8700
SINGER Models; 96 class, 103k, 196k, 188k, 188u, 241, 245, 251,
BERNINA: 117 117K 117L 217-10 217-20 217-25 317 517 740 850 950
BROTHER Models; 735, 755, 652, 737
CONSEW Models; 210, 215, 216, 217, 220, 230, 7630R-1
HIGHLEAD; GC128
JUKI Models; DDL 201, 227, 555, 5530, 5550, 8500, 8300, 8700
MITSUBISHI: DB126 DB130 DB150 DB170 DB189 DB190 DB191 DB196 DB320 DB322 DB325 DG519 DN352 DW350 DU330 DY230 DY339DY340 DY349 LD520 LS2-100 LS2-200 LS2-1130 PB810 PB820 PLM SERIES
SINGER Models; 96 class, 103k, 196k, 188k, 188u, 241, 245, 251, 291U-3 2191 2491D
WSM-5550
TYPICAL: GC6-1-D3E2 GC6150B GC6150H GC6150M GC6160D3 GC6195M
Non-US Warranty: 30 days parts and labor.
Specifications
These high quality needles will fit many models of sewing machines including :
Alfa : 121.101-401-500-503, 119.300
Artisan : 196R, 5500, 8500
Bernina : 117, 217-10, 217-20, 317, 517, 740, 850, 950
Brother : B221, B484, B485, B523, B524, B525, B526, B652, B705, B707, B714, B715, B716, B735, B737, B745, B747, B755, B757, B764, B781, B790, B791, B792, B861, BAS-400
Consew : 38, 39, 39-B, 75, 77, 101, 102, 105, 106R, 110, 133, 199R, 210, 215, 216, 217, 220, 230, 230R, 310,2 230R, C7630
Durkopp : 207-1, 207-3, 207-5, 207-6, 207-16
Feiyue : FY8500, FY8700
Gemsy : 8700
Janome : 1600P-DB, 1600P-DBX
Juki : DDL-201, DDL- 227, DDL-555, DDL-5530, DDL-5550, DDL-8300, DDL-8500, DDL-8700, DDL-8900, DDL-9000, DLM-522, DLM-523, DLN-415, DLN-490-4, DLU-490, DLU-5490, DMN-530-4, LZ-271, LZ-391N, MBH-180,
Mitsubishi : DB-126, DB-130, DB-170, DB-189, DB-190, DB-320, DB-350, DN-350-10, DY-340-12, DY-340-22, DY-349-22, LS2-100, LS2-200, LS2-1130
Singer : 96 class,103K, 120U, 172, 188, 241, 245, 251, 281, 291U-3, 2491D
Sunstar : KM-123A, KM-123B, KM-137A, KM-137B
Tacsew : 5550, T8700
Taiko : TK-505, TK-510
Toyota : AD156, AD157, AD338, D146, D147, D347, D348, D1422-42, D2432
Viking : M430, M431, M435, M435C, M440, M530, M535, M535C, M535D
Yamata : FY8500, FY8700
Organ 16X95 PD Titanium BP Ball Point Sewing Machine Needles 100/box
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 16x230RTW/LR Reverse Twist Wedge Point 100 Needles Leather Vinyl
 |
Our Price: $44.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
LR is the Organ designation for RTW, which means Reverse Twist Wedge Point. In reality it is a Wedge Point at 45 degrees
Available in sizes 11, 12,14,16,18,19,20,21, & 22
Needle Point: LR(RTW) Reverse Twist Point used for Leathers
Needle Comparison Chart
Available in sizes 11, 12,14,16,18,19,20,21, & 22
Needle Point: LR(RTW) Reverse Twist Point used for Leathers
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 16x231BP 100 Ball Point Round Shank Industrial Sewing Machine Needles, Choose One Size 8-18
 |
Our Price: $34.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Organ Needles 16X257 27WH 1738 1738A 16X95 16X231 DBX1 DBX257 ( Box of 100 needles)
Organ Needles
Made in Japan
For Systems: 16X257, 27WH,1738,1738A, 16X95,16X231,DBX1,DBX257 (Used in most industrial straight lockstitch machines)
Will Fit:
BROTHER Models; 735, 755, 652, 737
CONSEW Models; 210, 215, 216, 217, 220, 230, 7630R-1
JUKI Models; DDL 201, 227, 555, 5530, 5550, 8500
SINGER Models; 96 class, 103k, 196k, 188k, 188u, 241, 245, 251,
Organ Needles
Made in Japan
For Systems: 16X257, 27WH,1738,1738A, 16X95,16X231,DBX1,DBX257 (Used in most industrial straight lockstitch machines)
Will Fit:
BROTHER Models; 735, 755, 652, 737
CONSEW Models; 210, 215, 216, 217, 220, 230, 7630R-1
JUKI Models; DDL 201, 227, 555, 5530, 5550, 8500
SINGER Models; 96 class, 103k, 196k, 188k, 188u, 241, 245, 251,
Non-US Warranty: 30 days parts and labor.
Specifications
Needle System: 16 x 231 for Makes & Models: Singer 96-10, 103k, 196k, 188k, 188u, 241, 245, 251. Juki DDL 201, 227, 555, 5530, 5550. Consew 210, 215, 216, 217, 220, 230. 10 per package. 100 per box.Organ 16x231 Regular Sharp 100 Industrial Sewing Machine Needles Sz 10-18
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Description: 16x257: This is the standard sewing machine needle that other needle makers offer for Tajima and similar embroidery machines. It was originally designed for high speed sewing machines and does fine for that purpose.
Guaranteed to fit Bernina Models:
203, 204, 217, 850
Guaranteed to fit Brother Serger Models:
523N, M523, 523ND, 524N, M524, M525, M526, 526 526LCW & 526D
Guaranteed to fit Elna Sewing Machine Models:
7100
Guaranteed to fit Husqvarna Viking Serger Models:
234D
Guaranteed to fit Juki Sewing Machine Models:
DDL-227, DDL-552, DDL-553, DDL-555, DDL-555-4, DDL-5550N, DDL-8300N & DDL-8700
Guaranteed to fit Pfaff Serger Models:
794, 799,795, 796
Guaranteed to fit Singer Sewing Machine & Serger Models:
31-15, 31-16, 31-19, 31-20, 31-35, 331K, 14U14, 14U52, 14U12, 14U22, 14U53, 14U13, 14U23, 2191D200A and 2191D300A.
Guaranteed to fit White Sewing Machine Models:
305
Alternative Part # 287WK (287 WK), 763402079, DBXK, DBX1, 16X87, TEX1, 142935014, MDB-100B1400, 287, DBx1, DBx257, 16x231, 16x257 & 1738. Sizes 10, 12, 14, 16 & 18 Available.
Guaranteed to fit Bernina Models:
203, 204, 217, 850
Guaranteed to fit Brother Serger Models:
523N, M523, 523ND, 524N, M524, M525, M526, 526 526LCW & 526D
Guaranteed to fit Elna Sewing Machine Models:
7100
Guaranteed to fit Husqvarna Viking Serger Models:
234D
Guaranteed to fit Juki Sewing Machine Models:
DDL-227, DDL-552, DDL-553, DDL-555, DDL-555-4, DDL-5550N, DDL-8300N & DDL-8700
Guaranteed to fit Pfaff Serger Models:
794, 799,795, 796
Guaranteed to fit Singer Sewing Machine & Serger Models:
31-15, 31-16, 31-19, 31-20, 31-35, 331K, 14U14, 14U52, 14U12, 14U22, 14U53, 14U13, 14U23, 2191D200A and 2191D300A.
Guaranteed to fit White Sewing Machine Models:
305
Alternative Part # 287WK (287 WK), 763402079, DBXK, DBX1, 16X87, TEX1, 142935014, MDB-100B1400, 287, DBx1, DBx257, 16x231, 16x257 & 1738. Sizes 10, 12, 14, 16 & 18 Available.
Non-US Warranty: 30 days parts and labor.
Organ 16x257PD Titanium Coated BP Ball Point Needles Box 100 (16x231)
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
- Sizes 19,20,21, and 22 are only available in Chrome
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 16x257-NY2-PD Titanium Sewing Machine Needles Box 100
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Intensive studies of skipped stitches reveal the problematic factors related to needles.
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
NY2 Series Countermeasures for Skipped Stitches:
Organ's NY2 Series needles apply every possible countermeasure in their design to prevent skipped stitches, improve the quality of sewn products, and improve productivity.
All NY2 Series needles are suppplied with the Perfect Durability(PD) Titanium Finish.
NY2 Series Countermeasures for Skipped Stitches:
-
Tapered Blade Design
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
-
Cliff Scarf
-
New Shape for Needle's Eye
-
Slim Needle Point
- Works on Upholstery Machines, Straight-Stitch and Zig-Zag Industrial Machines.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
NY2 Series Countermeasures for Skipped Stitches:Tapered Blade Design
- Skipped stitches occur when the distance between the needle and the point of the looper is too great. Instead of employing the regular double-swaged blade, Organ's NY2 Series has a tapered blade design intended to dramatically reduce the needle's flexibility during high-speed sewing conditions.
- NY2 Series design increases the needle's strength by 30% as compared to conventional needle designs.
Cliff Scarf
- Increases in sewing machine speed and the diverse assortment of sewing threads require an optimally designed needle scarf to form the proper and stable thread loop that forms a stitch. The NY2 Series has a long, deep scarf called a "Cliff Scarf," that is designed to facilitate the reliability of picking up thread and avoiding skipped stitches.
Shape of Needle's Eye
- The shape of the needle's eye must allow proper spacing for the sewing thread. The NY2 Series has designed the needle's eye as the optimal "thread guide" to feed the thread to the stitch.
Slim Needle Point
- The slim point of NY2 Series needles drastically reduces penetration resistance. The design minimizes needle deflection that causes skipped stitches especially in thick and hard materials. The slim point has an adeed advantage in also being effective at reducing yarn breakage.
Organ 16x99 (SY3060, TFx99) 100 Needles for Singer 78-1 Industrial Walking Foot Upholstery Sewing Machines
 Organ 16x99 100 Needles for Singer 78-1 Walking Foot Sewing Machines |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Interchangeable
Non-US Warranty: 30 days parts and labor.
Specifications
Organ 1906 PD Titanium Coated Sharp or Ball Point Sewing Machine Needles 100/Box Size 11/75
 2960: Organ 1906 PD Titanium Coated Sharp or Ball Point Sewing Machine Needles 100/Box Size 11/75 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Organ 190LR Box of 100 Leather Point Needles for Pfaff and Durkopp-Adler Industrial Sewing Machines, Brother 612 & Juki Pocketwelt
 |
Our Price: $44.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Please be sure to check your needle system requirement in your instruction manual to ensure compatibility.
Include Brother 612 & Juki Pocketwelt Sewing Machine .
pfaff model:
28, 143, 145, 146, 190, 195, 335, 343, 344, 390, 543, 544, 545, 546, 555, 593, 594, 595, 596, 1240, 1245, 1246, 1545, 3006, 3125, 3135, 4145
Include Brother 612 & Juki Pocketwelt Sewing Machine .
pfaff model:
28, 143, 145, 146, 190, 195, 335, 343, 344, 390, 543, 544, 545, 546, 555, 593, 594, 595, 596, 1240, 1245, 1246, 1545, 3006, 3125, 3135, 4145
Non-US Warranty: 30 days parts and labor.
Organ 190R 100 Needles, Sharp or Ball Point for Juki 1508, Brother 612, Pfaff, Durkopp-Adler*
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Please be sure to check your needle system requirement in your instruction manual to ensure compatibility.
Non-US Warranty: 30 days parts and labor.
Organ 190R PD Box of 100 Perfect Durability Titanium Coated Needles for Pfaff, Durkopp-Adler Industrial Sewing Machines, Brother 612 & Juki Pocketwelt
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Please be sure to check your needle system requirement in your instruction manual to ensure compatibility.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki Warranty InformationOrgan 1955-01SK1PD Round Shank Crank* Needles Box of 100, Pfaff Grandquilter Longarm Machine, etc.
 Organ 1955-01SK1PD Round Shank Crank* Needles Box of 100, Pfaff Grandquilter Longarm Machine, etc. |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Organ 214X1 100 Chrome Sewing Machine Needles Sizes 18-30, Reliable 273, Juki LG158, Singer 45, Consew 756, Durkopp Adler, Pfaff, TechSew Leather Mach
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Industrial needles for 328 system
- Used on following industrial sewing machines :
Singer 45K Class
Juki LG-158-1
Consew 756R, SK-2R, SKZ-6
And many other heavy duty industrial walking foot leather stitcher sewing machines.
Non-US Warranty: 30 days parts and labor.
Specifications
Organ 214X1 needles are available in following sizes. Please select your size :Singer Size 18 (Metric Size 110) Medium-heavy fabric
Singer Size 19 (Metric Size 120) Medium-heavy to heavy fabric
Singer Size 20 (Metric Size 125) Heavy fabric
Singer Size 21 (Metric Size 130) Heavy fabric
Singer Size 22 (Metric Size 140) Heavy fabric
Singer Size 23 (Metric Size 160) Heavy fabric
Singer Size 24 (Metric Size 180) Extra-heavy fabric
Singer Size 25 (Metric Size 200) Extra-heavy fabric
Singer Size 26 (Metric Size 230) Extra-heavy fabric
Singer Size 27 (Metric Size 250) Extra-heavy fabric
Organ Needles Buyers Guide
Organ 214X2RTW 100 Chrome Sewing Machine Needles Sizes 21-28 Reliable 273, Juki 158, Singer 45, Consew 756, Durkopp Adler, Pfaff, TechSew Leather
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Industrial needles for 328 system
- Used on following industrial sewing machines :
Singer 45K Class
Juki LG-158-1
Consew 756R, SK-2R, SKZ-6
And many other heavy duty industrial walking foot leather stitcher sewing machines.
Non-US Warranty: 30 days parts and labor.
Specifications
Organ 214X1 needles are available in following sizes. Please select your size :Singer Size 21 (Metric Size 130) Heavy fabric
Singer Size 22 (Metric Size 140) Heavy fabric
Singer Size 23 (Metric Size 160) Heavy fabric
Singer Size 24 (Metric Size 180) Extra-heavy fabric
Singer Size 25 (Metric Size 200) Extra-heavy fabric
Singer Size 26 (Metric Size 230) Extra-heavy fabric
Singer Size 27 (Metric Size 250) Extra-heavy fabric
Organ Needles Buyers Guide
Juki Warranty Information
Organ LWx5T 251LG 50 Needles, Choose 1-Size 8/60 to 18/110 for Made in Japan and Taiwan Blind Stitch Machines
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Japan made full size and portable blindstitch hemmer machines, most in USA from Yamagata JAPAN, Center Manufacturing Company.
Alternative Needle System Numbers: 251E, LWx5T, SY7425, 20C300LG, 29CB, 29BNL, 300G
U.S. Blindstitch :718, 718-C, 718-2, 1118, 118-C, 1099.
US Stitchline SL718-2
Columbia : T1718, T175
Consew 718, 1118-2, 75C (not 75T)
Union Special 99KS blindstitch machine
Rex
Alternative Needle System Numbers: 251E, LWx5T, SY7425, 20C300LG, 29CB, 29BNL, 300G
U.S. Blindstitch :718, 718-C, 718-2, 1118, 118-C, 1099.
US Stitchline SL718-2
Columbia : T1718, T175
Consew 718, 1118-2, 75C (not 75T)
Union Special 99KS blindstitch machine
Rex
Non-US Warranty: 30 days parts and labor.
Specifications
A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.Needle Sizes Available for Light, Medium, and Heavy Weight apparel, drapery, and interior fabrics (not upholstery)
Size 8 (Metric Size 60) Light
Size 9 (Metric Size 65) Blindstitch Size 2.0, for Light
Size 10 (Metric Size 70) Blindstitch Size 2.5, for Light
Size 11 (Metric Size 75) Blindstitch Size 3.0, for Light
Size 12 (Metric Size 80) Medium
Size 13 (Metric Size 85) Medium
Size 14 (Metric Size 90) Blindstitch Size 3.5, for Medium
Size 15 (Metric Size 95) Heavy
Size 16 (Metric Size 100) Blinndstitch Size 4.0, for Heavy
Size 18 (Metric Size 110) Blindstitch Size 4.5, for Heavy
Organ 287KH PD Titanium Coated Industrial Sewing Machine Needles 100/box
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 287WKH PD Titanium Coated BP Ball Point Industrial Sewing Machine Needles 100/box
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 29x3, 100 Regular Needles, Cylinder Arm Beds, Singer Shoe Patch Machines, Choose One Size 12 14 16 18 20 or 21
 Organ 29x3, 100 Regular Needles, Cylinder Arm Beds, Singer Shoe Patch Machines, Choose One Size 12 14 16 18 20 or 21 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Organ 29x4 Leather Point 100 Needles for Consew 29 Shoe Patch Machines, Choose One Size 14 16 18 20 21 22 23 24 or 25
 Organ 29x4 Leather Point 100 Needles for Consew 29 Shoe Patch Machines, Choose One Size 14 16 18 20 21 22 23 24 or 25 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Organ 34R Regular Sharp Industrial Round Shank Sewing Machine Needles, Box of 100
 |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Organ 34R Regular Sharp Industrial Round Shank Sewing Machine Needles, Box of 100
Non-US Warranty: 30 days parts and labor.
Organ 501SC PD Titanium Coated Industrial Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 62x43 PD Titanium Coated BP Ball Point Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 62x43 PD Titanium Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 62x45 (149x5) Chrome BP Ball Point Sewing Machine Needles Box100
 |
Our Price: $54.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- choose size 11, 12, 14, 16, or 22
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 62x45 (149x5) PD Titanium Coated Sewing Machine Needles 100
 |
Our Price: $54.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- choose size 11, 12, 14, 16, or 22
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 71x1 PD Titanium Coated BP Ball Point Sewing Machine Needles 100/box
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 71x1 PD Titanium Sewing Machine Needles 100/box
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. |
Features
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 750SC PD Titanium Coated BP Ball Point Industrial Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 750SC PD Titanium Coated Industrial Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 7X4 Leather Point Needles 100 for Singer Class 7 Very Heavy Duty Sewing Machines
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
- These are leather point. Round Point Needles are used for non leather vinyl items.
- Available in sizes 23,24,25,26, & 27
Non-US Warranty: 30 days parts and labor.
Specifications
*Other compatible machines:Juki Class TSC-461
Consew Class 744, 745, 756, 757, 4214P
Techsew 5100
Tippman
Cobra Class 4
Singer Class 7, 7-5, 7-9, 7-10, 7-13, 7-16, 7-31, 7-33, 7-34, 7-41, 7-47, 7-55, 7-56, 97-10
Click HERE for Singer Class 7 Manual with section on needles
Click HERE for original manual in Singer Class 7
Organ 81x1 PD Titanium Coated BP Ball Point Sewing Machine Needles
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ 81x1 PD Titanium 100 Needles Like DCx1 DMx1 82x1 MY1023A SY1225
 |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
Fits many older Baby Lock and other brand sergers that require a round needle.(Also replaces needle systems DMx1, 81x1, 82x1, MY1023A, & SY1225)
Organ B27 BP Ball Point 100 Needles PD Titanium for Industrial Sergers, Interchangeable with MY1023, SY6120, DCx27 Needle Systems
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ B27 PD Titanium Coat 100 Serger Needles Interchangeable with MY1023, SY6120, DCx27 Needle Systems
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ B64 PD Titanium Coated Sewing Machine Needles 100/box
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ Curved BlindStitch Machine Needles, Box of 50 in 10 packs of 5, Choose One of 5 Sizes 2,2.5,3,3.5,or 4, Blind Stitch Brand, Model, Needle System
 |
Our Price: $74.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Specifications
A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.Needle Sizes Available for Light, Medium, and Heavy Weight apparel, drapery, and interior fabrics (not upholstery)
Size 8 (Metric Size 60) Light
Size 9 (Metric Size 65) Blindstitch Size 2.0, for Light
Size 10 (Metric Size 70) Blindstitch Size 2.5, for Light
Size 11 (Metric Size 75) Blindstitch Size 3.0, for Light
Size 12 (Metric Size 80) Medium
Size 13 (Metric Size 85) Medium
Size 14 (Metric Size 90) Blindstitch Size 3.5, for Medium
Size 15 (Metric Size 95) Heavy
Size 16 (Metric Size 100) Blinndstitch Size 4.0, for Heavy
Size 18 (Metric Size 110) Blindstitch Size 4.5, for Heavy
Organ D5F 100 Bag Closer Needles, Size 25 for Consew C10NS Sewing Machines
 10028: Organ D5F 100 Bag Closer Needles, Size 25 for Consew C10NS Machines |
Our Price: $169.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Interchangeable with Siruba AA needle BCx5 Size 25, Fischbein Model D needle D5F, and Consew Model C10NS needle D-5F
- Box of 100 needles for Consew C10NS Heavy Duty Single Needle Chainstitch Bag Closer/Closing Machine
Non-US Warranty: 30 days parts and labor.
Organ DBxK5 CS Cool Sew Round Shank 100 Needles 75x11 for for Brother 1201, Melco, Happy, Ricoma, Tajima, Baruden, Toyota, SWF, ZSK, MB4
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
DB-K5 CS: The Cool-Sew finish was developed to alleviate needle problems resulting from the following situations:
1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
2) Materials or residue sticking to needle surface or in eye
3) Excessive sewing thread breakage due to friction in the needle eye
The COOL-SEW finish needle’s surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles.
When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
Embroidery needles on this page are round shank needles
for commercial/industrial embroidery machines only.
This embroidery needle is designed especially for industrial /commercial embroidery machines such as Tajima, SWF, Barudan, etc. The DB-K5 needle has a one size larger eye than that found in a regular needle. Unlike sewing thread used for general apparel sewing, embroidery threads are "fluffier" and have less tensile strength. A larger needle eye, without increased blade diameter, allows the embroidery thread to pass easily through the needle's eye without fraying or snapping
1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
2) Materials or residue sticking to needle surface or in eye
3) Excessive sewing thread breakage due to friction in the needle eye
The COOL-SEW finish needle’s surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles.
When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
Embroidery needles on this page are round shank needles
for commercial/industrial embroidery machines only.
This embroidery needle is designed especially for industrial /commercial embroidery machines such as Tajima, SWF, Barudan, etc. The DB-K5 needle has a one size larger eye than that found in a regular needle. Unlike sewing thread used for general apparel sewing, embroidery threads are "fluffier" and have less tensile strength. A larger needle eye, without increased blade diameter, allows the embroidery thread to pass easily through the needle's eye without fraying or snapping
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Organ DBxK5 Commercial Embroidery Machine 100 Chrome Plated Needles Size 8-20, Size 11 Recommended for Brother* Melco, Happy, Ricoma, Tajima, Baraden
 |
Our Price: $32.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc.
- Chrome finish
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Organ DBxK5 PD Titanium Coat Larger Eye Embroidery Machine 100 Needles for Brother 1201, Melco, Happy, Ricoma, Tajima, Baruden, Toyota, SWF, ZSK, MB4
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc.
These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles which home embroidery machines require.
These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles which home embroidery machines require.
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 is standard for all new Brother and Tajima Industrial Embroidery Machines as well as many others. Round Shank (Industrial Needles)While the needle is the least expensive component in any embroidery or sewing machine, it is the most important. High quality, ORGAN needles designed in cooperation with the machine builders assure maximum performance, quality, and economy.
ORGAN needles are manufactured from special high carbon, silicon rich steel. We use the latest state-of-the-art production techniques to insure high polished eyes for dependable, smoother stitches, consistent quality, and fewer thread breaks.
The Organ Needle Company works closely with all of Japan's sewing machine builders to design and manufacturer needles for optimal performance. A machine builder cannot afford to buy an inferior needle at any price!
Organ DBxK5PD Titanium Coat BP Ball Point Large Eye 100 Embroidery Needles* for Brother 1201, Melco, Happy, Ricoma, Tajima, Baruden, Toyota, SWF, ZSK
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
*Box of 100 For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc. Commercial Multi Needle Embroidery Machines Only.
These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles for home embroidery machines.
These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles for home embroidery machines.
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Organ DCx1 (81x1) Round Shank Serger Needles Box of 100 for Babylock BL318-436 Janome, Mammylock, Juki, Pfaff, Pinnock, Riccar, Simplicity, Industrial
 8204: Organ DCx1 (81x1) Round Shank Overlock Serger Machine 100 Needles |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- Use on older Babylock sergers
- Upper shank of needle is round, not flat
- Use size 11 for light weight fabrics
- Use size 14 for medium and heavy weight fabrics
Non-US Warranty: 30 days parts and labor.
Specifications
Compatible with Babylock Serger Models:BL3200, BL3-318, BL3-407, BL3-408, BL3-416, BL3-417, BL3-418, BL3-426, BL4-436DF, BLSE200, BLSE300, DBL34-60, EF405 & EF405M.
Compatible with Janome Serger Models:
603 & 603A.
Compatible with Juki Serger Models:
MO-2516N.
Compatible with Mammylock Serger Models:
334 & 334D.
Compatible with Pfaff Serger Models:
603 & 603A.
Compatible with Pinnock Serger Models:
P1/P2, PBL1, PBL4, PBL4-436DF & PBL4-543DF.
Compatible with Riccar Serger Models:
RL330 & RL333.
Compatible with Simplicity Serger Models:
SL600, SL700 & SL800.
Organ DCx27 PD BP Titanium Coated Ball Point Needles Box 100, Packs of 10 for Juki MO and Other Industrial Overlock Sergers, Like B27, MY1023, SY6120
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ DCx27 PD Titanium Plated 100 Serger Needles for Industrial Overlock Machines, Perfect Durability Lasts 3-5 Times Longer
 2974: Organ DCx27 PD Titanium Coated 100 Needles Industrial Overlock Sergers |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ DCx27 PD Titanium 100 Needles Indusrial Overlock Serger Machines, Baton Rouge Retail Store
 10857: Organ DCx27 PD Titanium 100 Needles Indusrial Overlock Serger Machines BR |
Availability: Retail Store Only Condition: New In Box |
Features
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ DNx1 Bag Closer Sewing Machine 100 Needles Size 22-27, for Gemsy Yamata Ricoma GK-26-1A, Rex RX-261, New Long NP7A
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*(Size 25 Recommended). When exclusively closing heavy duty bags it is recommended to use needle type UY943GS #200 with square point .
- Available in the following sizes: 22,23,24,25,26 & 27
- May be used with the Union Special and Newlong Bag Closer machines NP-7A
Needle Selection Guide
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ DPx16NW 135x16NW Narrow Wedge Point 100 Needles for Leather
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
*Choose On Size per Box of 100 Needles for Portable or Power Stand Walking Foot/Needle Feed Industrial Upholstery Machines. Equivalent Needle Systems 135X16NW, SY3371, SY3381
Spear Point Needles for Most Walking Foot Machines.
(also called Narrow Wedge Needles) mostly used for sewing leather.
The 135X16NW(Narrow Wedge) are available in 14,16,18,19,20,21,22,23,24, & 25
The Diamond Point and TRI Points are generally used on harder leathers like belts. The Diamond Point has a smaller hole than the TRI.
The Narrow Wedge are generally used on softer leathers
Spear Point Needles for Most Walking Foot Machines.
(also called Narrow Wedge Needles) mostly used for sewing leather.
The 135X16NW(Narrow Wedge) are available in 14,16,18,19,20,21,22,23,24, & 25
The Diamond Point and TRI Points are generally used on harder leathers like belts. The Diamond Point has a smaller hole than the TRI.
The Narrow Wedge are generally used on softer leathers
Non-US Warranty: 30 days parts and labor.
Specifications
DPx16 Blade PointArticle No. 14164
Measures A: 2.00 D: 39.00 N: 14.00 mm
Needle Sizes
80 12
90 14
100 16
110 18
120 20
125 21
130 22
140 23
160 24
180 25
200 26
Equivalent Systems 135X16NW SY3371 SY3381
Needle
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing Machines
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4,, MC-3720016-00, MC-3515016-00
Organ DPx16 135x16DIA 135x17 Diamond Point Leather Needles 100, Choose Size 25 down to 14, 20-25 Recommended for Upholstery Fabrics and Thread Sizes
|
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Choose On Size per Box of 100 Needles for Portable or Power Stand Walking Foot/Needle Feed Industrial Upholstery Machines (135x17 DPx17). Equivalent Needle Systems 135X16NW, SY3371, SY3381.
The 135x16DIA(Diamond Point) are available in 14,16,18,19,20,21,22,23,24, & 25.
The Diamond Point and TRI Points are generally used on harder leathers like belts. The Diamond Point has a smaller hole than the TRI.
The Narrow Wedge are generally used on softer leathers
The 135x16DIA(Diamond Point) are available in 14,16,18,19,20,21,22,23,24, & 25.
The Diamond Point and TRI Points are generally used on harder leathers like belts. The Diamond Point has a smaller hole than the TRI.
The Narrow Wedge are generally used on softer leathers
Non-US Warranty: 30 days parts and labor.
Specifications
DPx16 Blade PointArticle No. 14164
Measures A: 2.00 D: 39.00 N: 14.00 mm
Needle Sizes: 14 16 18 19 20 21 22 23 24 and 25
80 12
90 14
100 16
110 18
120 20
125 21
130 22
140 23
160 24
180 25
200 26
Equivalent Systems 135X16NW SY3371 SY3381
Needle
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing Machines
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Organ DPx17 135x17 CS Cool Sew PTFE Coated Non Stick Needles Box 100 for Upholstery Sewing Machines and Thread Sizes
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
"You guys were great! Prices are amazing!! The needles are great so far have the first non stick in my machine and haven't had a problem. Love that I don't have to clean my needle after I go through dual sided tape. I will be customer for life with the speed of shipping and quality products. I'm happy" Shelly T, Online.
The finish has PTFE (like Teflon) that helps reduce friction and the resulting heat. Vortex needle coolers use cold compressed air to further cool needles
The finish has PTFE (like Teflon) that helps reduce friction and the resulting heat. Vortex needle coolers use cold compressed air to further cool needles
- 135x17 type needles have a round top (no flat side) for industrial upholstery and walking foot machines.
Less Thread Breakage, Less Sticking, Less Downtime.
The CS Cool-Sew finish on the needle surfaces and in the needle’s eye is resistant to sticking. Its finish has a very low friction coefficient, which prevents excessive heat buildup and resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles. Cool-Sew needles are ideal for stitching through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads. When Cool-Sew needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
Regular needles show buildup of sticking fibers while Cool-Sew needle is free of buildup.
As synthetic threads pass through the eye of a needle, they create friction and heat which may melt or snap threads. In some cases, the eye of the needle may be cut. The COOLSEW finished needle eye acts as if eye is lubricated and thereby alleviates the aforementioned problems. As an ordinary chromium plated needle penetrates through synthetic materials, the materials may stick to the needle. This may cause some of the synthetic materials to pass through the needle holes and create undesirable finishes. The sticking to the surface of the needle may also create heat-buildup problems such as melting and machine jamups. The COOL-SEW finish on the needle helps alleviate the sticking and heat-buildup problems.
Non-US Warranty: 30 days parts and labor.
Specifications
Recommended ThreadNeedle & Thread Size Compatibility Chart for Industrial Sewing Machines(.PDF)
Tech Sew Needle Thread Chart
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing Machines
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
The Cool-Sew finish was developed to alleviate needle problems resulting from the following situations:
1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
2) Materials or residue sticking to needle surface or in eye
3) Excessive sewing thread breakage due to friction in the needle eye
The COOL-SEW finish needle's surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles. When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity. COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
{Q}How do I reduce resistance of the needle going through 1/4" dense vinyl, leather, skins and canvas? Can I increase presser foot height on my portable walking foot sewing machine? Jonathan
{A}Jonathan, Adjusting the presser foot height would only aggravate the problem of needle resistance in your 1/4" vinyl materials under the foot. It would be better to make sure the machine is well lubricated (including motor shaft at both ends) until it gets up to top speed without needle, thread and fabric. Then use the PTFE Cool Sew coated needles to lessen resistance in materials. Then use silicone to spray on the thread, needle and vinyl materials (silicone is colorless, odorless and stainless) to further reduce resistance. Please advise what works best. Thanks. John
{Q}What is PTFE?
{A} Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that finds numerous applications. The best known brand name of PTFE is Teflon by DuPont Co.
PTFE is a fluorocarbon solid, as it is a high-molecular-weight compound consisting wholly of carbon and fluorine. PTFE is hydrophobic: neither water nor water-containing substances wet PTFE, as fluorocarbons demonstrate mitigated London dispersion forces due to the high electronegativity of fluorine. PTFE has one of the lowest coefficients of friction against any solid.
PTFE is used as a non-stick coating for pans and other cookware. It is very non-reactive, partly because of the strength of carbon–fluorine bonds, and so it is often used in containers and pipework for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear, and energy consumption of machinery.
It is commonly believed that Teflon is a spin-off product from the NASA space projects. However, that is not so, although it has been used by NASA.[2] Wikipedia
Polytetrafluoroethylene (PTFE) is the chemical name for Teflon®. This is a highly saturated fluorocarbon polymer which was discovered by Roy Plunkett, a 27-year-old research chemist working at the DuPont Research Laboratories in Deepwater, New Jersey in 1938.
Two dry film lubricants compared; the competing product on the left and the smooth, even, consistent coating of MicroCare dry film lubricants on the right.
Plunkett's polymer had some remarkable properties: it was not attacked by corrosive acids, even if they were hot; it did not dissolve in solvents; it could be cooled to -240°C without becoming brittle and it could be heated to 260°C without impairing its performance. PTFE materials also are extremely stable and nonflammable; clean, dry, non-oily and non-staining. The material is biologically inert and does not support biological growth (that is, it is non-pyrogenic). For more details about PTFE, see the DuPont web site.
Plunkett also noted that the substance had a slippery feel, which is why you are reading this page today. Lubricants based on PTFE offer an extremely low static coefficient of friction, which stems from the extremely low intermolecular forces (van der Waals forces) in the PTFE molecule itself.
How PTFE Works
With a ratio of four fluorine atoms to every two carbon atoms, the carbon-based heart of the molecule is essentially shielded from contact with any other molecule. It’s almost impossible for any other chemical structure to gain access to the carbon atoms. This gives PTFE the extraordinary chemical resistance mentioned above. It’s tough for a solvent or other agent to degrade the molecule if the carbon is "out of reach." Even if another atom or substance could gain access, the carbon-to-fluorine bonds have high bond disassociation energy, making them almost unbreakable. But the fluorine does even more.
Fluorine is "anti-social" and doesn't want to associate with other atoms. So as part of a PTFE molecule, it wants to get as far away from other atoms as possible. Anything getting close is automatically repelled, so repelled molecules can’t stick to the PTFE surface. Which is why PTFE is called "the slipperiest material in the world."
Organ DPx17 135x17 CS LP* Cool Sew PTFE Coated Non Stick Needles 100
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Works against thread breakage by the residue in the needle's eye and skipped stitches.
For avoiding seam puckering. Long lasting effect on the high‑speed sewing. LP series
LP plating can reduce the residue in the needle's eye and
groove and the sewing runs more smoothly. Improved anti-friction
function reduces heat build up which can shred and break thread.
For avoiding seam puckering. Long lasting effect on the high‑speed sewing. LP series
LP plating can reduce the residue in the needle's eye and
groove and the sewing runs more smoothly. Improved anti-friction
function reduces heat build up which can shred and break thread.
- For the sewing with the
interlining
- For the chemical fabrics
- For the synthetic leather
- For the sewing with the
glue, adhesive
- For the coated material
Non-US Warranty: 30 days parts and labor.
Specifications
New LP series Anti‑adhesion, lubricated plating for the adhesion problem on the sewing. For glued or adhesive materials.Recommended Thread
Needle & Thread Size Compatibility Chart for Industrial Sewing Machines(.PDF)
Tech Sew Needle Thread Chart
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing Machines
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
The Cool-Sew finish was developed to alleviate needle problems resulting from the following situations:
1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
2) Materials or residue sticking to needle surface or in eye
3) Excessive sewing thread breakage due to friction in the needle eye
The COOL-SEW finish needle's surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles. When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity. COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
Organ DYx3PD 100 Titanium Coated Needles Same as 7x1, 7x3, 794, 794H in PD Perfect Durability for Singer, Consew, Juki, Heavy Duty Sewing Machines*
|
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
for Very Heavy Duty Industrial Sewing Machines* Sizes 22-27, PD Equivalents: 794D/DYX3D 794H, 794LL For Leather, Shoes, Tents, Upholstery, Heavy Materials, Cartons, Plastics, Suitcases, Saddles, Tack, Round Point Needles for Non Leather
Please refer to the manufacture or users manual to ensure you are ordering the correct needle type and size.
Application Field
Suitable for Straight Sewing. Effective on hard and thick materials, not leather which requires wedge point needles. These Round Point Needles are used for non leather vinyl items.
Please refer to the manufacture or users manual to ensure you are ordering the correct needle type and size.
Application Field
Suitable for Straight Sewing. Effective on hard and thick materials, not leather which requires wedge point needles. These Round Point Needles are used for non leather vinyl items.
Non-US Warranty: 30 days parts and labor.
Specifications
*For:Juki Class TSC-461
Consew Class 744, 745, 756, 757, 4214P
Techsew 5100
Tippman
Cobra Class 4
Singer Class 7, 7-5, 7-9, 7-10, 7-13, 7-16, 7-31, 7-33, 7-34, 7-41, 7-47, 7-55, 7-56, 97-10
Click HERE for Singer Class 7 Manual with section on needles
Click HERE for original manual in Singer Class 7
Organ DYx3F 100 Chrome Needles (Interchangeable with needle systems 7x1 7x3 794 794H PD) for Singer Consew Juki Etc Heavy Duty Sewing Machines
61423: Organ DYx3F 100 Needles (7x1 7x3 794 794H PD) for Singer Consew Juki Etc |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Please check the needle system to ensure this is the correct needle for your machine before ordering
Schmetz
System Equivalents Needle thickness
794 7X3, DYX3 110 120 130 140 160 180 200 230 250 280 300
794 D DYX3 D 160 180 200
794 LL DYX3 LL 180 200
794 LR DYX3 LR 160 180 200 230 250 280
794 P DYX3 P 140 160
794 S DYX3 S 160 180 200 230 250
794 S SERV 1 160 200 230 250
794 S SERV 2 230
794 SUK 7X3 SUK, DYX3 SUK 180 200
Groz-Beckert GB-DYX3 Needle
Schmetz
System Equivalents Needle thickness
794 7X3, DYX3 110 120 130 140 160 180 200 230 250 280 300
794 D DYX3 D 160 180 200
794 LL DYX3 LL 180 200
794 LR DYX3 LR 160 180 200 230 250 280
794 P DYX3 P 140 160
794 S DYX3 S 160 180 200 230 250
794 S SERV 1 160 200 230 250
794 S SERV 2 230
794 SUK 7X3 SUK, DYX3 SUK 180 200
Groz-Beckert GB-DYX3 Needle
Non-US Warranty: 30 days parts and labor.
Organ 7x2 Diamond Point Hard Leather Needles 100 for Singer 7-31, Consew, Juki Etc Heavy Duty Sewing Machines
92635: Organ 7x2 Diamond Point Leather Needles 100 for Singer 7-31, Consew, Juki Etc Heavy Duty |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Please check the needle system to ensure this is the correct needle for your machine before ordering.
Schmetz
System Equivalents Needle thickness
794 7X3, DYX3 110 120 130 140 160 180 200 230 250 280 300
794 D DYX3 D 160 180 200
794 LL DYX3 LL 180 200
794 LR DYX3 LR 160 180 200 230 250 280
794 P DYX3 P 140 160
794 S DYX3 S 160 180 200 230 250
794 S SERV 1 160 200 230 250
794 S SERV 2 230
794 SUK 7X3 SUK, DYX3 SUK 180 200
Groz-Beckert GB-DYX3 Needle
Schmetz
System Equivalents Needle thickness
794 7X3, DYX3 110 120 130 140 160 180 200 230 250 280 300
794 D DYX3 D 160 180 200
794 LL DYX3 LL 180 200
794 LR DYX3 LR 160 180 200 230 250 280
794 P DYX3 P 140 160
794 S DYX3 S 160 180 200 230 250
794 S SERV 1 160 200 230 250
794 S SERV 2 230
794 SUK 7X3 SUK, DYX3 SUK 180 200
Groz-Beckert GB-DYX3 Needle
Non-US Warranty: 30 days parts and labor.
Organ 7x4 Narrow Wedge Point Softer Leather Needles 100 for Singer 7-31, Consew, Juki Etc Heavy Duty Sewing Machines
92635: Organ 7x2 Diamond Point Leather Needles 100 for Singer 7-31, Consew, Juki Etc Heavy Duty |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Please check the needle system to ensure this is the correct needle for your machine before ordering.
Schmetz
System Equivalents Needle thickness
794 7X3, DYX3 110 120 130 140 160 180 200 230 250 280 300
794 D DYX3 D 160 180 200
794 LL DYX3 LL 180 200
794 LR DYX3 LR 160 180 200 230 250 280
794 P DYX3 P 140 160
794 S DYX3 S 160 180 200 230 250
794 S SERV 1 160 200 230 250
794 S SERV 2 230
794 SUK 7X3 SUK, DYX3 SUK 180 200
Groz-Beckert GB-DYX3 Needle
Schmetz
System Equivalents Needle thickness
794 7X3, DYX3 110 120 130 140 160 180 200 230 250 280 300
794 D DYX3 D 160 180 200
794 LL DYX3 LL 180 200
794 LR DYX3 LR 160 180 200 230 250 280
794 P DYX3 P 140 160
794 S DYX3 S 160 180 200 230 250
794 S SERV 1 160 200 230 250
794 S SERV 2 230
794 SUK 7X3 SUK, DYX3 SUK 180 200
Groz-Beckert GB-DYX3 Needle
Non-US Warranty: 30 days parts and labor.
Organ LWx6T 29-34 Curve Flat Shank 50 Blindstitch Needles in 6 Sizes 8/60-18/110
 |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Taiwan and China portable model CM or 500 blind stitch machines. Do not use this page to order needles for Japan made blind stitch machines which take 251LG or LWx3T needles.
The Organ LWx6T assortment comes with 50 high-quality needles designed for blindstitch machines. The assortment includes:
The Organ LWx6T assortment comes with 50 high-quality needles designed for blindstitch machines. The assortment includes:
- 5 pcs 29-492 (LWx6T #8/60) Blindstitch Size 2.0
- 10 pcs 29-492-1/2 (LWx6T #9/65) Blindstitch Size 2.5
- 10 pcs 29-493 (LWx6T #11/75) Blindstitch Size 3.0
- 10 pcs 29-493-1/2 (LWx6T #14/90) Blindstitch Size 3.5
- 10 pcs 29-494 (LWx6T #16/100) Blindstitch Size 4.0
- 5 pcs 29-494-1/2 (LWx6T #18/110) Blindstitch Size 4.5
Needle Selection Guide
Needle Comparison Chart
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
LWx6T is interchangeable with blindstitch needle systems 29BL, 29-49, 29-34 and 2140TPA needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.
Needle Sizes Available for Light, Medium, and Heavy Weight apparel, drapery, and interior fabrics (not upholstery)
Size 8 (Metric Size 60) Light
Size 9 (Metric Size 65) Blindstitch Size 2.0, for Light
Size 10 (Metric Size 70) Blindstitch Size 2.5, for Light
Size 11 (Metric Size 75) Blindstitch Size 3.0, for Light
Size 12 (Metric Size 80) Medium
Size 13 (Metric Size 85) Medium
Size 14 (Metric Size 90) Blindstitch Size 3.5, for Medium
Size 15 (Metric Size 95) Heavy
Size 16 (Metric Size 100) Blinndstitch Size 4.0, for Heavy
Size 18 (Metric Size 110) Blindstitch Size 4.5, for Heavy
Organ LWx6T 29-34 Curved Flat Shank 50 Blindstitch Needles, Choose One Size Option
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Taiwan and China portable model CM and/or model 500 blind stitch machines including Consew, Tacsew, Reliable, Yamata, Gemsy, Rex, Supreme, Tony, Hu Wang, etc.
Needle Selection Guide
Needle Comparison Chart
Needle Selection Guide
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
LWx6T is interchangeable with blindstitch needle systems 29BL, 29-49, 29-34 and 2140TPA needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.
Optional Needle Sizes Available for Light, Medium, and Heavy Weight apparel, drapery, and interior fabrics (not upholstery)
Size 8 (Metric Size 60) Light
Size 9 (Metric Size 65) Blindstitch Size 2.0, for Light
Size 10 (Metric Size 70) Blindstitch Size 2.5, for Light
Size 11 (Metric Size 75) Blindstitch Size 3.0, for Light
Size 12 (Metric Size 80) Medium
Size 13 (Metric Size 85) Medium
Size 14 (Metric Size 90) Blindstitch Size 3.5, for Medium
Size 15 (Metric Size 95) Heavy
Size 16 (Metric Size 100) Blinndstitch Size 4.0, for Heavy
Size 18 (Metric Size 110) Blindstitch Size 4.5, for Heavy
Organ Needles 29-49 Same as 29BL, LWX2T, 2140TP Pk of 50 for Blind Hemmer Machines - Specify Size
 Organ Needles 29-49 Same as 29BL, LWX2T, 2140TP Pk of 50 for Blind Hemmer Machines |
Our Price: $89.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Lewis 150-2, Kobe Blindstitch Hemmers
Non-US Warranty: 30 days parts and labor.
Organ PHx1 (253 137x1 SY5901) 100 Barbed Hook Needles, Choose Size 12, 14, 16, 18, 19 or 21 for Singer 114B, Cornelly, Consew 104, Consew 133.
 |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Some odd sizes, and smallest and largest needle sized may have to be special ordered. Standard sizes 12-19 are in stock. Other sizes are in Japan
Non-US Warranty: 30 days parts and labor.
Organ Regular* Industrial Sewing Machine Needles, Box of 100
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Please be aware that the particular needles for your brand and model number industrial machine may be at a higher price than the base needle price. We will submit your order to Organ Needle Company for price verification. If it comes back at a higher we will contact you for approval before shipping.
Needle Comparison Chart
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Organ ELx705 (SY2922) like Schmetz,100 Chrome PlatedOverlock Serger Needles, Sizes 11, 12 or 14 Flat Shank for Portable Overlock Coverstitch Machines
 8441: Organ ELx705 (SY2922) like Schmetz, 100 Chrome Overlock Serger Needles |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Organ ELx705 are Chrome finish although the word Chrome or letters CF are not on the package.
Many Organ needles are Chrome finish which you can tell by their very shiny appearance.
This is an ELX705 needle with a regular point. The ELX705 needle system is specially designed for cover stitch machines. This needle has a long grove on both the front and back as well as a slightly larger scarf and a light ball point. The chrome finish (CF) reduces heat and wear and aids in slipping through the fabric. Consult your manual for the proper needle selection for your brand and model number. 100 needles per box.
Organ SY2922:
Many Organ needles are Chrome finish which you can tell by their very shiny appearance.
This is an ELX705 needle with a regular point. The ELX705 needle system is specially designed for cover stitch machines. This needle has a long grove on both the front and back as well as a slightly larger scarf and a light ball point. The chrome finish (CF) reduces heat and wear and aids in slipping through the fabric. Consult your manual for the proper needle selection for your brand and model number. 100 needles per box.
Organ SY2922:
- Home Serger Double Groove Needles (front and back)
- Chrome Plate Finish
- Bulk 100 Count of Needles
- Sizes: #11/75, #12/80, and #14/90
- These needles are like the Schmetz ELx705 needles.
Needle Selection Guide
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
When we originally started selling these ELX705 needles, the "standard" in the trade was "BALL POINT " Only.The BALL POINT version was the only point style we supplied whether customers requestedBall Point or not. During the past two years there have been increased requests for "REGULAR / Sharp POINT "version of ELx705 (SY2922). We now stock ELx705 (SY2922) both Regular Point and Ball Point .
They are available is sizes #11/75, #12/80, and #14/90 both Regular or Ball Points. Diamond Organ Co.
Organ TEx1 (DBx1 16x231 16x257) BP Ball Point 100 Needles Round Shank Size 14 Recommended for for Old Brother 523-634 Viking Huskylock 430-535 Sergers
 16859: Organ TEx1 (DBx1 16x231 16x257) BP Ball Point 100 Serger Needles Size 14 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
We recommend Size 14 serger needles because they are less likely to deflect and bend into the foot, needle plate/stitch fingers or loopers, which may require polishing off burrs or replacing.
Non-US Warranty: 30 days parts and labor.
Specifications
For Viking Huskylock 435, 535, etc. manufactured by BrotherOrgan UY128GAS 100 Needles for Cover Hem Stitch Interlock Industrial Sewing Machines*
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
While the needle is the least expensive component in any embroidery or sewing machine, it is the most important. High quality, ORGAN needles designed in cooperation with the machine builders assure maximum performance, quality, and economy.
ORGAN needles are manufactured from special high carbon, silicon rich steel. We use the latest state-of-the-art production techniques to insure high polished eyes for dependable, smoother stitches, consistent quality, and fewer thread breaks.
The Organ Needle Company works closely with all of Japan's sewing machine builders to design and manufacturer needles for optimal performance. A machine builder cannot afford to buy an inferior needle at any price!
The price quoted is for a 100 needles.
Round Shank (Industrial Needles)
ORGAN needles are manufactured from special high carbon, silicon rich steel. We use the latest state-of-the-art production techniques to insure high polished eyes for dependable, smoother stitches, consistent quality, and fewer thread breaks.
The Organ Needle Company works closely with all of Japan's sewing machine builders to design and manufacturer needles for optimal performance. A machine builder cannot afford to buy an inferior needle at any price!
The price quoted is for a 100 needles.
Round Shank (Industrial Needles)
Non-US Warranty: 30 days parts and labor.
Specifications
Works for the following systems: (note please check your needle requirements separately with the manufacture to ensure you are ordering the correct needle)ARTISAN BROTHER CONSEW JUKI KANSAI MITSUBISHI PEGASUS PFAFF SINGER SIRUBA TAIKO TOYOTA UNION SPECIAL WILLCOX & GIBBS YAMATO
For COVERSTITCH and CHAINSTITCH Sewing Machines.
These Needles will fit the following Sewing Machines:
ARTISAN: ZJW122
BROTHER: B223-501 B257 B271 B272 B277
FEIYUE: GK-31016
JUKI: MF-860 MF-870 MF-880 MF-890 MF-7722 MF-7723 MF-7822 MF-7823
KANSAI: DLR-500 DLR-1500 DLR-1501 DLR-1502 DLR-1503 DLR-1504 DLR-1508P-SB DLR-1508SF DVC-200 DVC-202 DVK-1700 DVK-1701DVK-1702 DVK-1703 DWK-1803F DWR-1900 DWR-1903H DWR-1903HK L500 L5000 R9000 S6800 V803F V7000 V8000 W803F W8103F
PEGASUS: W41 W43 W61 W63 W562 WS42 WS62 WS64 WT562
PFAFF: 5489HX-814
RIMOLDI: 164-00-33 164-00-34 164-00-35 164-00-1LA39 261-10-2LA-01 261-10-2LD-01 264-00-1LA-01 264-00-1LA-39 264-00-2LA 264-00-3LA
SINGER: 107-44 141D 141W 142D 147W1 147W4 147W8 147SV178 231 262-6 262-25 552B102 THRU B303 552B341 552X6 THRU 552X25 553B101 THRU B402 555 781 782 791D 792D 2600-1 2610-1 3781D 3782D
SIRUBA: F007
UNION SPECIAL: 11500 11700 31100 31200 33500 33600 33700 34700DE 34700KDE 34700KE 35700AL 35700BS 35700CL 35700DS 35800 51200BC 51200BL-7/8 51200BM 51300 51500 51700BL 51700BU 51900BH 52700 52800 52900 56300 56500J 56500R 56900 57700AP 57700KL 57700L 57900H 57900N FS300
TAIKO: TK800
WILLCOX & GIBBS: 4-480 21-02 W41 W42 W43 W61 W62 W63 W542 W562 WS42 WS62 WS64 WT562
YAMATO: DS100 DS102 DS103 DS105 DV100 DV130 DV131 DV1200 DV1205MB DV1209MB DV1250 DV1253 DV1255 DV1258 DV1259 DV1261 DV1262 DV1265 DV1266 DV1267 DV1290 DV1400 DV1403 DV1409 DV1411 DV1600 DV1611 DV1613 DW100 DW1000 DW1259 DW1305MD DW1309MD DW1350 DW1353 DW1355 DW1359 DW1366 DW1367 DW1371 DW1375 DW1376 DW1377 DW1390 DW1500 DW1503 DW1509 DW1530 DW1614 DW1640P DW1644P DW1700 DW1735 DW1741P DW1742P VC SERIES ALL CLASSES VF SERIES ALL CLASSES
Schmetz S135X17 DPx17 A100 Upholstery and Home Dec Sewing Machine Needles 1 Size 10-26 Box of 100, Skipped stitches reduced by Denim reinforced blade
 21774: Schmetz S135X17 DPx17 A100 Upholstery Sewing Machine Needles 1 Size 10-26 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Available in Sizes 12, 14, 16, 18, 19, 20, 21, 22, 23 or 24. Use size 20 and up for #69 through #270 upholstery thread sizes*.
Upholstery & Home Déc Needles
· Description: Assorted needles for heavy duty projects. Skipped stitches
reduced by Denim reinforced blade. Shredded & broken threads lessened
by Topstitch elongated eye. Multiple project uses by Universal.
· Needle Names & Sizes: Jeans 100/16, 110/18; Topstitch 100/16;
Universal 100/16, 110/18.
· Needle Notes: Jeans- Reinforced blade; Topstitch, Elongated eye;
Universal, the workhorse in large needle sizes.
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Upholstery & Home Déc Needles
· Description: Assorted needles for heavy duty projects. Skipped stitches
reduced by Denim reinforced blade. Shredded & broken threads lessened
by Topstitch elongated eye. Multiple project uses by Universal.
· Needle Names & Sizes: Jeans 100/16, 110/18; Topstitch 100/16;
Universal 100/16, 110/18.
· Needle Notes: Jeans- Reinforced blade; Topstitch, Elongated eye;
Universal, the workhorse in large needle sizes.
Non-US Warranty: 30 days parts and labor.
Specifications
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing Machines, including most all metal heavy duty Portable Walking Foot machinesCompatible with walking foot portable upholstery machines: Reliable Baracuda 2000u33, Consew CP206R Sewing Machine, Thompson PW500/PWZ500 Walking Foot Industrial Sewing Machine. Sailrite LSZ-1 ZIGZAG Walking Foot Portable Metal Sewing Machine... - See more at: http://www.allbrands.com/search?search=walking+foot+portable#sthash.Q2j1Ix24.dpuf
Compatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Schmetz S134R 100 Needles Size 18 for Juki TL2200QVP/-S, Longarms -USA Only
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*Please Note: Juki recommends Organ 134R or Schmetz S134R needles without crank style (bump in front of needle to match scarf indentation in back of needle) since it does not affect Juki hook timing and needle clearance. Crank style needles Organ SK1 and Schmetz MR are NOT recommended for Juki QVP's, but apparently work on all other brands of long arm quilting machines, including Handi Quilter.
Can replace interchangeable needle systems 1901 1955 SY1995 SY6790 34 134R 135X5 135x7 DPX5 DPx7 DPx134.
System S134R is generally used in single needle lockstitch industrial sewing machines. It is also known as 135x5, 135x7, 135x25, 1901, DPx5, and DPx7. Standard sharp point. Needles are sold in boxes of 100 only. When ordering please specify the number of boxes, not the total number of needles (i.e., quantity of 2 = 200 needles).
Available in Sizes 11,12,14,16 and 18
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Can replace interchangeable needle systems 1901 1955 SY1995 SY6790 34 134R 135X5 135x7 DPX5 DPx7 DPx134.
System S134R is generally used in single needle lockstitch industrial sewing machines. It is also known as 135x5, 135x7, 135x25, 1901, DPx5, and DPx7. Standard sharp point. Needles are sold in boxes of 100 only. When ordering please specify the number of boxes, not the total number of needles (i.e., quantity of 2 = 200 needles).
Available in Sizes 11,12,14,16 and 18
Non-US Warranty: 30 days parts and labor.
Schmetz SDBxK5 100 Larger Eye Commercial Embroidery Machine Needles -USA Only
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc.
Schmetz SDBXK5 is Available in sizes: 10, 11, 12, 14, and 16. Needles are sold in boxes of 100 only. When ordering please specify the number of boxes, not the total number of needles (i.e., quantity of 2 = 200 needles).
Click HERE for Schmetz Special Needles for Embroidery Machines .pdf
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Schmetz SDBXK5 is Available in sizes: 10, 11, 12, 14, and 16. Needles are sold in boxes of 100 only. When ordering please specify the number of boxes, not the total number of needles (i.e., quantity of 2 = 200 needles).
Click HERE for Schmetz Special Needles for Embroidery Machines .pdf
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Schmetz S135X16 100 Diamond Wedge Point Leather Needles Size 18-24 -USA Only
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Available in Sizes 18, 21, 22, 23 or 24. Choose 1
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
Needle System 135x17 for Upholstery or 135x16 for Leather Vinyl Industrial Sewing MachinesCompatible with Artisan Machine Models:
29, 611, 618, 618-1SC, 797, 797AB-800/AB/ABN, 797AB LTHR/ABNS LTHR, 2618, 2698, 4400, 4400-25/LTHR, 4420, 4420-25, 6191 and SC LTHR.
Compatible with Brother Machine Models:
DB2-B727, DB2-B797, DB2-B798, LS2-B837, LS2-B877, LS2-B891, LS3-C51, LS3-C53 and LT2-B838.
Compatible with Chandler Machine Models:
DY-337.
Compatible with Consew Machine Models:
28, 118R, 119R, 146RB, 166R, 166RB, 206RB, 223, 224, 225, 226, 226R-1, 227, 229, 239, 244, 254, 255, 255RB, 277, 282, 288, 289, 339, 358, 382 and 389.
Compatible with Durkopp Machine Models:
147-1 and 147-2.
Compatible with Feiyue Machine Models:
FY5318.
Compatible with Juki Machine Models:
DNU-241, DNU-1541, DNU-1541S, LH-517, LH-518, LH-527, LH-1162, LH-1182, LK-980, LU-562, LU-563, LU-1510, LUH-521, LUH-562, MOL-100PA and MOL-100PSA.
Compatible with Mercury Machine Models:
280L and 280LS.
Compatible with Mitsubishi Machine Models:
CU-865-12, CU-865-22, DU-100, DU-110, DU-120, DY-339, DY-340 and DY-349.
Compatible with Sailrite Machine Models:
111, Big-N-Tall, Professional, Ultrafeed LS-1 and Ultrafeed LSZ-1.
Compatible with Seiko Machine Models:
CW-7, CW-7B, CW-8. CW-8B, CW-8V, LAH-1LC, LCW Class, LLW Class, LLWH Class, LPW-8, LPW-26, LPW-27, LPW-28, LSC Class, LSW Class, PW Class, STH Class, STW Class, TD-2 and TD-6.
Compatible with Singer Machine Models:
111G, 111W, 111W112, 111W151, 111W153, 138B, 153W, 168G, 168W, 211A, 211G, 211U, 211W.
Compatible with Yamata Machine Models:
FY5318.
Alternative Part Numbers Include 145646-0-23, SY3355, MR4, DPX17, MC-3720016-00, MC-3515016-00
Schmetz 16X231/257 A100 Box of 100 Round Shank Needles, Choose One Size 10 to 22
 21776: Schmetz 16X231/257 A100 Box of 100 Round Shank Needles, Choose One Size 10 to 22 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
like Organ, 16x231, 16x257, 16x71, JLx1B and Juki DBx1 Needle Systems Available in Sizes 10, 11, 12, 14, 16, 18, 20, 22.
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
Alternate Part Numbers: 08-10040, 287WK (287 WK), 763402079, DBXK, DBX1, 16X87, TEX1, 142935014, MDB-100B1400, 287, DBx1, DBx257, 16x231, 16x257, 1738, 2055, 2270, SY2270, 100265-0-31.Guaranteed to fit Bernina Models:
203, 204, 217, 740, 850, 950
Guaranteed to fit Brother Serger Models:
523N, 523ND, 524N, 526, 526D, 526LCW, 634D, 834DP, DB2-B714, DB2-B716, DB2-B790-3, DB2-792, DB2-B793, LK3-B433, LK3-B434, LK3-B484, LK3-B700, LK3-B800, M523, M524, M525, M526
Guaranteed to fit Consew Serger Models:
105, 220, 7360RB, 99
Guaranteed to fit Elna Sewing Machine Models:
7100
Guaranteed to fit Husqvarna Viking Serger Models:
234D, 330D, 360D
Guaranteed to fit Janome Sewing Machine Models:
1600P-DB, 1600P-DBX
Guaranteed to fit Juki Sewing Machine Models:
DDL-227, DDL-552, DDL-553, DDL-555, DDL-5550, DDL-5550N, DDL-555-4, DDL-8300N, DDL-8500-7, DDL-8700, DDL-8700-B-7
Guaranteed to fit Mitsubishi Sewing Machine Models:
DB130
Guaranteed to fit Pfaff Serger Models:
794, 795, 796, 799
Guaranteed to fit Q'nique sewing machine models:
14+, 15R, 21
Guaranteed to fit Singer Sewing Machine and Serger Models:
103K, 14U12, 14U13, 14U14, 14U22, 14U23, 14U52, 14U52A, 14U53, 14U53A, 188K1, 19-10, 196K, 2191D200A, 2191D300A, 241-12, 241-13, 241-2, 241-3, 251-11, 251-12, 251-13, 251-2, 251-20, 251-22, 251-3, 31, 31-16, 31-19, 31-20, 31-35, 331K, 331K1, 331K4, 44, 451KX31, 451KX41, 451KX42, 96, 96K
Guaranteed to fit White Sewing Machine Models:
305
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.