 |
December 3, 2024 |
Straight Lockstitch Industrial and Commercial Sewing Machines with Power Stand
Note: Bonded Polyester upholstery threads size #69 and up were designed for walking foot upholstery machines sewing primarily on exterior fabrics with size 20-25 needles. Juki, Brother, Consew, Pfaff, Reliable, Tacsew, Yamata and Singer high speed straight stitch industrial power stand machines and portable home sewing machines were designed for regular home sewing and quilting threads sewing primarily on interior fabrics with size 9-19 needles. Not to say that it cannot be done with the same 1/2-3/4HP motors, but the top thread diameter clearances around the rotary hook may be too close to prevent jamming with upholstery threads, even with size 19 needles. We recommend using bonded nylon and polyester upholstery threads only with portable walking foot and industrial sewing machines. John Douthat, Owner & Tech, AllBrands
Chandler CM8700 1-Needle High Speed Lockstitch Sewing Machine and KD Power Stand, up to 5000SPM, 5.5/13mm Foot Lift, 5mm Stitch Length, Auto Oil
 39863: Chandler CM8700 1-Needle High Speed Lockstitch Sewing Machine and KD Stand |
Our Price: $699.99 Prices are subject to change, and only current prices will be honored. Availability: OUT OF STOCK Condition: New In Box |
Features
- Automatic Lubrication
- Optimum balancing for smooth operation and low noise
- Accurate and responsive sewing on a wide variety of materials
- Improved durability for trouble free performance
- Simple, easy-to-operate functions
Chandler CM8700/CM8718 Machine Spec Sheet (.PDF)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Number of Needles: 1 (Single)
-
Feeding Mechanism: Drop Feed
-
Workspace: Standard Workspace
-
Standard or Full Function: Standard Functions
-
Speed, Max (S.P.M.): 5000
-
Stitch Length: 5mm
-
Needle: 16 x 257
-
Bobbin: L Side Load
-
Needle Bar Stroke: 31mm
-
Lift Height: 13mm Knee, 5.5m Hand
Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Consew 277 RFS3 Heavy Duty, 46mm 10" Cylinder Arm Walking Foot Needle Feed Sewing Machine and Binder, 1/2" Lift, 4 SPI, Hook Oil, Power Stand 2200SPM
 |
Our Price: $2,769.99 Prices are subject to change, and only current prices will be honored. Availability: Please contact us for availability. Condition: New In Box |
Features
- 2300 Stitches Per Minute
- Presser Foot Lift by Hand: 5/16"
- Presser Foot Lift by Foot: 1/2"
- Needle Bar Stroke:1-5/16"
- CentraLube Semi Automatic Lubrication System
- Horizontal Axis Rotary Hook
- Reverse Feed
- Narrow cylinder arm - 46mm diameter (Models 277R-2 & 277RFS)
- Horizontal axis rotary hook
- Compound feed, walking foot mechanism assures even feeding of several piles or of slippery materials
- Centra-Lube® semi-automatic lubrication system
- Simple wing nut adjustment permits raising and lowering of the center foot to allow for sewing different thicknesses of material
- Simple adjustment permits the raising and lower of the center foot which allows for sewing of different thickness of material
- For sewing light to heavy-weight fabrics, leather, vinyl, upholstery, synthetics, canvas and various laminated and coated materials.
- Especially designed for products with narrow openings.
- Designed for stitching tubular and curved work.
- Suitable for sewing such products as caps, cushions, boots, shoes, auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, awnings, umbrellas, tops, bags, luggage, handbags, travelware, accessories, sports and camping equipment, wearing apparel, orthopedic appliances, slippers, etc.
You Tube Video shows Optional Binder Attachment which is fabricated by third parties using your raw and finished samples. Please send samples of raw and finished material binding to Atlanta Attachment Company atlatt.com Attn: Randy to quote and fabricate any proper syschronized binder attachment
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Speed,Max.(S.P.M.): 2200Clearence Under Foot: 5/16" (8.5 mm)
Needle Bar Strong: 1 5/16" (33 mm)
Stitch Length,Max.: 4.2s.p.i. (6 mm)
Needle: 135 X 17
Bobbin: Metal 10656
Hook: 18034
Bed size: 2 9/16" dia X 10-9/16" (65mm dia X 268mm)
Work Space: 10 5/32" (258mm)
Stitch Type: 301
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 277RB-1 Heavy Duty, Drop Feed, Single Needle Walking Foot Lockstitch Sewing Machine with Motor
 |
Our Price: $3,339.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 2200 Stitches Per Minute
- Presser Foot Lift by Hand: 5/16"
- Presser Foot Lift by Foot: 1/2"
- Needle Bar Stroke:1-5/16"
- Large Side Bobbin
- Reverse
- CentraLube Semi Automatic Lubrication System
- Horizontal Axis Rotary Hook
- Reverse Feed
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Narrow cylinder arm - 46mm diameter (Models 277R-2 & 277RFS)
- Horizontal axis rotary hook
- Compound feed, walking foot mechanism assures even feeding of several piles or of slippery materials
- Centra-Lube® semi-automatic lubrication system
- Simple wing nut adjustment permits raising and lowering of the center foot to allow for sewing different thicknesses of material
- Simple adjustment permits the raising and lower of the center foot which allows for sewing of different thickness of material
- For sewing light to heavy-weight fabrics, leather, vinyl, upholstery, synthetics, canvas and various laminated and coated materials.
- Especially designed for products with narrow openings.
- Designed for stitching tubular and curved work.
- Suitable for sewing such products as caps, cushions, boots, shoes, auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, awnings, umbrellas, tops, bags, luggage, handbags, travelware, accessories, sports and camping equipment, wearing apparel, orthopedic appliances, slippers, etc.
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 277RBFS Heavy Duty, Drop Feed, Single Needle Walking Foot Lockstitch Sewing Machine Assembled with Motor
 |
Our Price: $3,549.99 Prices are subject to change, and only current prices will be honored. Availability: OUT OF STOCK Condition: New In Box |
Features
- 2200 Stitches Per Minute
- Synchronized Binder
- Presser Foot Lift by Hand: 5/16"
- Presser Foot Lift by Foot: 1/2"
- Needle Bar Stroke:1-5/16"
- Large Side Bobbin
- Reverse
- CentraLube Semi Automatic Lubrication System
- Horizontal Axis Rotary Hook
- Reverse Feed
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Narrow cylinder arm - 46mm diameter (Models 277R-2 & 277RFS)
- Horizontal axis rotary hook
- Compound feed, walking foot mechanism assures even feeding of several piles or of slippery materials
- Centra-Lube® semi-automatic lubrication system
- Simple wing nut adjustment permits raising and lowering of the center foot to allow for sewing different thicknesses of material
- Simple adjustment permits the raising and lower of the center foot which allows for sewing of different thickness of material
- For sewing light to heavy-weight fabrics, leather, vinyl, upholstery, synthetics, canvas and various laminated and coated materials.
- Especially designed for products with narrow openings.
- Designed for stitching tubular and curved work.
- Suitable for sewing such products as caps, cushions, boots, shoes, auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, awnings, umbrellas, tops, bags, luggage, handbags, travelware, accessories, sports and camping equipment, wearing apparel, orthopedic appliances, slippers, etc.
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 287RB-2 Heavy Duty, Single Needle, Lockstitch Compound Walking Foot Needle Feed Sewing Machine Head, Safety Clutch, 2300SPM + Stand Options
 1409: Consew 287RB-2 Heavy Duty, Single Needle, Lockstitch Compound Walking Foot Needle Feed Sewing Machine Head, Safety Clutch, 2300SPM + Stand Options |
Our Price: $3,399.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
OVERVIEW:
Heavy Duty Cylinder Arm, Single Needle, Drop Feed, Needle Feed, Walking Foot, Alternating Pressure Feet, Lockstitch Machine
With: Walking Foot, Centra-Lube Semi-Automatic Lubrication System, Vertical Axis Rotary Hook, Reverse Feed, Safety Clutch
APPLICATIONS:
For sewing light to heavy-weight fabrics, leather, vinyl, upholstery, synthetics, canvas and various coated and laminated materials
Designed for stitching tubular and curved work.
Suitable for sewing such products as caps, cushions, boots, shoes, auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, awnings, umbrellas, tops, bags, luggage, handbags, travelware accessories, sports and camping equipment, wearing apparel, orthopedic appliances, slippers, etc.
Tape Binding with synchronized binder, Model 287RBFS
FEATURES:
Vertical axis rotary hook
Compound feed, walking foot mechanism assures even feeding of several plies or of slippery materials
Stitches per minute — 2300*
Centra-Lube® semi-automatic lubrication system
Reverse feed – models 287RB-2 / 287RBFS
Safety clutch prevents the hook from being damaged
Simple adjustment permits the raising and lowering of the center foot which allows for sewing of different thicknesses of material
Heavy Duty Cylinder Arm, Single Needle, Drop Feed, Needle Feed, Walking Foot, Alternating Pressure Feet, Lockstitch Machine
With: Walking Foot, Centra-Lube Semi-Automatic Lubrication System, Vertical Axis Rotary Hook, Reverse Feed, Safety Clutch
APPLICATIONS:
For sewing light to heavy-weight fabrics, leather, vinyl, upholstery, synthetics, canvas and various coated and laminated materials
Designed for stitching tubular and curved work.
Suitable for sewing such products as caps, cushions, boots, shoes, auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, awnings, umbrellas, tops, bags, luggage, handbags, travelware accessories, sports and camping equipment, wearing apparel, orthopedic appliances, slippers, etc.
Tape Binding with synchronized binder, Model 287RBFS
FEATURES:
Vertical axis rotary hook
Compound feed, walking foot mechanism assures even feeding of several plies or of slippery materials
Stitches per minute — 2300*
Centra-Lube® semi-automatic lubrication system
Reverse feed – models 287RB-2 / 287RBFS
Safety clutch prevents the hook from being damaged
Simple adjustment permits the raising and lowering of the center foot which allows for sewing of different thicknesses of material
- 3000 Stitches Per Minute
- Clearance Under Foot: 11/32"
- Needle Bar Stroke:1-5/16"
- Bed Size:2 9/16" x 10 9/16"
- Safety Clutch
- Walking Foot
- CentraLube Semi Automatic Lubrication System
- Vertical Axis Rotary Hook
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
SPECIFICATIONS:Number of Needles 1 (Single)
Feeding Mechanism Walking Foot
Workspace Standard Workspace
Standard or Full Function Standard Functions
Speed, Max (S.P.M.) 2300
Clearance Under Presser Foot 11/32" (8.5mm)
Stitch Length 1/4" (6.2mm)
Work Space 10 5/32" (258mm)
Needle 135 x 17
Bobbin Pre-Wound U
Bed Size 3 7/32" dia x 10 9/16" (65mm dia. x 268mm)
Stitch Type 301
Needle Bar Stroke 1 5/16" (33.2mm)
Hook 13086 Spec Sheet
Instruction Manual
Parts List
- Vertical axis rotary hook
- Compound feed, walking foot mechanism assures even feeding of several piles or of slippery materials
- Stitches per minute - 3000*
- Centra-Lube® semi-automatic lubrication system
- Reverse feed - Model 287R-1/ 287RFS
- Simple wing nut adjustment permits raising and lowering of the center foot to allow for sewing different thicknesses of material
- Safety clutch prevents the hook from being damaged
- Simple adjustment permits the raising and lower of the center foot which allows for sewing of different thickness of material
- For sewing light to heavy-weight fabric leather, vinyl, upholstery, synthetics, canvas and various laminated and coated materials
- Designed for stitching tubular and curved work
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
See Videos on Consew 287RB-2 and Comparable Machines
Consew 315R2 Single Needle Feed Only Industrial Lockstitch Sewing Machine +Power Stand, 5000SPM, Auto Oil, 9/16" Foot Lift, 7SPI, Light Medium Fabrics
 1420: Consew 315R2 Single Needle Feed Industrial Lockstitch Sewing Machine, Table, Stand, Servo Motor |
Our Price: $1,619.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 5000 Stitches Per Minute
- Clearance Under Foot: 7/32"-Hand
- Clearance Under Foot: 9/16"-Knee
- Needle Bar Stroke:1-7/32"
- Bed Size: 7" x 18 7/8"
- Automatic Lubrication System
- Reverse Feed
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- High speed -5000 S.P.M. for light to medium-weight materials
- 4000 S.P.M. for medium to heavy-weight materials
- Horizontal axis transverse rotary hook
- Synchronized drop and needle feed assures even feeding of slippery and difficult to feed materials
- Fully automatic lubrication with recirculating pump
- For stitching ligth to medium weight fabric, knits, synthetics, vinyl, canvas, denim, coated and laminated materials
- Suitable for attaching pockets to shirts, sewing collars & cuffs, stitching skirts, blouses, dresses, raincoats and general wearing apparel
- Model 315RH - designed for sewing medium to heavy-weight materials
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 7360R-2SS High Speed Straight Lockstitch Industrial Sewing Machine, Stand, 5500SPM, Auto Oil, Knee Lever, Stainless steel bed plate
 98462: Consew 7360R-2SS High Speed Straight Lockstitch Industrial Sewing Machine, Assembled Stand, 5500SPM, Auto Oil, Knee Lever, Stainless steel bed plate |
Our Price: $899.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Warning: No instructions are available for putting the stand together, so if you have never assembled one or do not have another one to go by, buy the assembled version.
Applications
Applications
- For sewing light to heavier weight materials including cottons, knits, polyester, nylon, sheer fabrics, and denim
- Suitable for stitching such products as blouses, shirts, uniforms, overalls, etc.
- Heavyweight fabrics such as jeans can be sewn by changing the needle plate, feed dog, foot, stitch regulator, hook and needle bar
Features
- Stainless steel bed plate—this separates Consew from other brands. It costs more to produce and besides looking really high-tech, it is the longest lasting surface you can find. It resists rust, lets the fabric move more easily, and is non-magnetic. This makes it easier to sew magnetic tape, grommets, and snaps.
- Fully automatic lubrication with recirculating high-pressure pump
- Reverse feed
- Noise and vibration absorbent table mounting
- "Feather touch" pressure foot lifter
- Ultra high speed: 5500 SPM
- Japanese components
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Consew
7360R-2SS Instruction Manual & Parts List Consew 7360R-2SS Spec Sheet (PDF)
- Maximum 5500 SPM
- 1/4" clearance under foot (6 mm)
- 1 1/4" needle bar stroke (31.8 mm)
- Maximum 5 SPI (5 mm)
- Needle" 16 x 257
- Metal bobbin
- Hook: 22T4-017
- 7" x 18 1/8" bed size (177 x 477 mm)
- 10" work space (258 mm)
- Stitch type : 301
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 7360RB Ultra High Speed Single Needle Lockstitch Sewing Machine, Big M Lg. Bobbin, 1/4" Lift, 5SPI, Power Stand, 5000SPM, 100 Needles
 |
Our Price: $869.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 3000 Stitches per Minute
- Interchangeable Stitch Cams
- Regular Size Bobbin
- Work Space 10"
- 3.5 Stitches per Inch
- Bed Size: 7" x 18-7/8"
- Automatic Lubrication
- Reverse Feed
- Japanese Components
- Automatic Lubrication
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Fully automatic lubrication with re-circulating high pressure pump
- Noise and vibration absorbing table mount
- "Feather-touch" pressure foot lifter
- Ultra high speed - 5000 S.P.M
- For sewing light to heavy weight materials including cottons, knits, polyester, nylon, sheer fabrics and denim
- Suitable for stitching such products as blouses, shirts, men, ladies and children's apparel, uniforms, overalls, lingerie, etc.
- Heavy weight fabrics such as jeans can be sewn by changing the needle plate, feed dog, foot, stitch regulator, hook and needle bar
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 7360RBATCWL(E)-1 Fully Automatic Ultra High Speed Single Needle Lockstitch Sewing Machine, Backtack, Thread Trim, Foot Lift, Lg Bobbin, Stand
 |
Our Price: $2,139.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Regular Size Bobbin
- Work Space 10"
- 3.5 Stitches per Inch
- Bed Size: 7" x 18-7/8"
- Automatic Lubrication
- Reverse Feed
- Japanese Components
- Automatic Lubrication
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Fully automatic lubrication with re-circulating high pressure pump
- Noise and vibration absorbing table mount
- "Feather-touch" pressure foot lifter
- Ultra high speed - 5000 S.P.M
- For sewing light to heavy weight materials including cottons, knits, polyester, nylon, sheer fabrics and denim
- Suitable for stitching such products as blouses, shirts, men, ladies and children's apparel, uniforms, overalls, lingerie, etc.
- Heavy weight fabrics such as jeans can be sewn by changing the needle plate, feed dog, foot, stitch regulator, hook and needle bar
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 7360RH-R SS High Speed Straight Lock Stitch Industrial Sewing Machine, 5mm Stitch Length, Auto Oil, Servo Motor Power Stand, up to 5000SP
 4261: Consew 7360RH-R SS High Speed Straight Lock Stitch Industrial Sewing Machine, 5mm Stitch Length, Auto Oil, Servo Motor Power Stand, up to 5000SP |
Our Price: $899.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- High-Speed
- Straight Stitch
- Stitch Length, and Forward
- Up To 5500 Stitches Per Minute
- Power Stand & 1/2 Hp Motor
- Industrial Sewing Machine
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- 5500 stitches per minute
- 5 mm stitches per inch
- Needle: DBx1 16x257
- Work space: 10" (258 mm)
- Self oiling system with automatic lubrication
- Reverse feed
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 7360RHATCWL(E)-1 Ultra High Speed HEAVY DUTY Single Needle Lockstitch Sewing Machine, Backtack, Thread Trim, Foot Lift, Assembled Power Stand
 |
Our Price: $1,929.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Regular Size Bobbin
- Work Space 10"
- 3.5 Stitches per Inch
- Bed Size: 7" x 18-7/8"
- Automatic Lubrication
- Reverse Feed
- Japanese Components
- Automatic Lubrication
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Fully automatic lubrication with re-circulating high pressure pump
- Noise and vibration absorbing table mount
- "Feather-touch" pressure foot lifter
- Ultra high speed - 5000 S.P.M
- For sewing light to heavy weight materials including cottons, knits, polyester, nylon, sheer fabrics and denim
- Suitable for stitching such products as blouses, shirts, men, ladies and children's apparel, uniforms, overalls, lingerie, etc.
- Heavy weight fabrics such as jeans can be sewn by changing the needle plate, feed dog, foot, stitch regulator, hook and needle bar
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 754R Heavy Duty 3.25" Cylinder Arm Needle Feed Industrial Sewing Machine, 16.5" Arm, 20mm Foot Lift, 2.5SPI, 800SPM, Space Saver Power Stand
 1468: Consew 754R3 Heavy Duty 3.25" Cylinder Arm Needle Feed Sewing Machine/Stand |
Our Price: $11,999.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Special order item delivery may take up to 3 months.
Extra Heavy Duty, Single Needle, Lockstitch Machine, Long Cylinder Arm
With: Large Oscillating Shuttle Hook, Extra Long Arm 16 1/2" (420mm), Reverse Feed, Built-In Bobbin Winder, Cam Take-Up Lever, Heavy Balance Wheel, Extra High Foot Life 13/16" (20mm)
APPLICATIONS
Suitable for sewing heavyweight materials such as canvas, vinyl, leather, synthetics and various coated, laminated and rubberized fabrics.
Appropriate for use in upholstery, footwear, leather, canvas industries
Designed for stitching such products as tents, sails, harnesses, tarpaulins, safety belts, parachutes, balloons, industrial bags, boots, book binding, auto, boat and furniture upholstery, sports and camping equipment, orthopedic appliances, suitcases, luggage, ski boots, knapsacks, footwear and outerwear made of extra heavy duty materials
Recommended for sewing tubular and curved work
Designed for extra thick thread
FEATURES
Large oscillating shuttle hook
Extra long arm - 16½" (420mm) for R-3 version (15¾” -400mm for R version)
Reverse feed
Built-in bobbin winder
Cam take-up lever
Extra high presser lift for sewing extra heavy materials
Heavy balance wheel
A cloth plate for flat work available as optional equipment for all models
Triple Transport: bottom, top and needle feed (walking foot)
Extra Heavy Duty, Single Needle, Lockstitch Machine, Long Cylinder Arm
With: Large Oscillating Shuttle Hook, Extra Long Arm 16 1/2" (420mm), Reverse Feed, Built-In Bobbin Winder, Cam Take-Up Lever, Heavy Balance Wheel, Extra High Foot Life 13/16" (20mm)
APPLICATIONS
Suitable for sewing heavyweight materials such as canvas, vinyl, leather, synthetics and various coated, laminated and rubberized fabrics.
Appropriate for use in upholstery, footwear, leather, canvas industries
Designed for stitching such products as tents, sails, harnesses, tarpaulins, safety belts, parachutes, balloons, industrial bags, boots, book binding, auto, boat and furniture upholstery, sports and camping equipment, orthopedic appliances, suitcases, luggage, ski boots, knapsacks, footwear and outerwear made of extra heavy duty materials
Recommended for sewing tubular and curved work
Designed for extra thick thread
FEATURES
Large oscillating shuttle hook
Extra long arm - 16½" (420mm) for R-3 version (15¾” -400mm for R version)
Reverse feed
Built-in bobbin winder
Cam take-up lever
Extra high presser lift for sewing extra heavy materials
Heavy balance wheel
A cloth plate for flat work available as optional equipment for all models
Triple Transport: bottom, top and needle feed (walking foot)
- up to 1200 Stitches per Minute
- 1" Presser Foot Lift Clearance
- 2-13/64" Needle Bar Stroke
- Max Stitch Length 2-1/2 spi
- 3-9/32" Cylinder Arm Diameter
- 15-3/4" Workspace
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Large oscillating shuttle hook
- Extra long arm - 15 3/4"
- Reverse feed
- Built-in bobbin winder
- Cam take-up lever
- Extra high presser lift for sewing extra heavy materials
- Heavy balance wheel
- A cloth plate for flat work available as optional equipment for all models
- Suitable for sewing heavyweight materials such as canvas, vinyl, leather, synthetics and various coated, laminated and rubberized fabrics
- Appropriate for use in upholstery, footwear, leather and canvas industries
- Designed for stitching such products as tents, sails, harnesses, tarpaulins, safety belts, parachutes, balloons, industrial bags, boots, book bindings, auto, boat and furniture upholstery, sports and camping equipment, orthopedic appliances, suitcases, luggage, ski boots, knapsacks, footwear and outerwear made of extra heavy duty materials
- Recommended for sewing tubular and curved work.
SPECIFICATIONS
Number of Needles 1 (Single)
Feeding Mechanism Needle Feed
Workspace Standard Workspace
Standard or Full Function Standard Functions
Speed, Max (S.P.M.) 800
Stitch Length 2 1/2 s.p.i. (10mm)
Work Space 16 1/2" (420mm)
Needle 7 x 3
Needle Bar Stroke 56 2 13/64"
Presser Lift 20mm 13/16"
Cylinder Diameter 3 3/16" (81mm)
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 756R-3 Extra Heavy Duty 3"Dia Cylinder Bed ,16" Long Arm Lockstitch Walking Foot Sewing Machine, 1" Foot Lift, Power Stand 1200SPM
 |
Our Price: $6,149.99 Prices are subject to change, and only current prices will be honored. Availability: Please contact us for availability. Condition: New In Box |
Features
CONSEW 756R-3 EXTRA HEAVY DUTY WALKING FOOT CYLINDER ARM 16-1/2" MACHINE... LARGE OSCILLATING SHUTTLE HOOK... REVERSE FEED... BUILT IN BOBBIN WINDER... CAM TAKE UP LEVER... HEAVY BALANCEWHEEL... EXTRA HIGH FOOT LIFT-13/16"... SPEED: 800S.P.M... STITCH LENGHT: 2-1/2" S.P.I... CYLINDER DIAMETER...
- 1200 Stitches per Minute
- 1" Presser Lift
- 2-13/64" Needle Bar Stroke
- Max Stitch Length 2-1/2 spi
- 3-9/32" Cylinder Arm Diameter
- 15-3/4" Workspace
- Alternating Pressor Feet With Reverse
- HEAVYDUTY UPPER & LOWER FEEDING MECHANISM ENSURES EVEN FEEDING OF MATERIALS BEING SEWN.
- FOR EACTRA HEAVY SEWING SUCH AS HEAVY LEATHER,CANVAS,VINYL.
- FOR LEATHER HARNESS & TRAVELING BAGS,TENETS,SEATS,SAFETY BELTS.
- SPEED: 1200SPM
- CLEARANCE UNDER FOOT: 33/64" (13mm)
- STITCH LENGHT,MAX.: 2s.p.i.(13mm)
- NEEDLE: 214x1,DDx1
- STITCH TYPE: 301
- NEEDLE BAR STROKE: 2"
- INCLUDES POWER STAND & MOTOR 110 VOLT
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- LARGE OSCILLATING SHUTTLE HOOK
- REVERSE FEED
- BUILT IN BOBBIN WINDER
- CAM TAKE UP LEVER
- HEAVY BALANCE WHEEL
- EXTRA HIGH FOOT LIFT-13/16"
- SPEED: 800S.P.M.
- STITCH LENGHT: 2-1/2" S.P.I.
- CYLINDER DIAMETER: 3-3/16"
- NEEDLE; 7x3
- Large oscillating shuttle hook
- Extra long arm - 15 3/4"
- Reverse feed
- Built-in bobbin winder
- Cam take-up lever
- Extra high presser lift for sewing extra heavy materials
- Heavy balance wheel
- A cloth plate for flat work available as optional equipment for all models
- Suitable for sewing heavyweight materials such as canvas, vinyl, leather, synthetics and various coated, laminated and rubberized fabrics
- Appropriate for use in upholstery, footwear, leather and canvas industries
- Designed for stitching such products as tents, sails, harnesses, tarpaulins, safety belts, parachutes, balloons, industrial bags, boots, book bindings, auto, boat and furniture upholstery, sports and camping equipment, orthopedic appliances, suitcases, luggage, ski boots, knapsacks, footwear and outerwear made of extra heavy duty materials
- Recommended for sewing tubular and curved work
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Consew 757R Extra Heavy Duty 16" Compound Walking Foot Sewing Machine/Stand, 1" Foot Lift, 2.5SPI, 28092 Bobbin, Winder, Big Wheel, 1200SPM, 7x3Needle
 1510: Consew 757R Extra Heavy Duty 16" Longarm Walking Foot Sewing Machine/Stand, 1" Foot Lift, 10mmSPM, 28092 Bobbin, Winder, Big Wheel, 1200SPM, 7x3Needle |
Our Price: $13,359.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
APPLICATIONS:
Suitable for sewing heavyweight materials such as canvas, vinyl, leather, synthetics and various coated, laminated and rubberized fabrics.
Appropriate for use in upholstery, footwear, leather, canvas industries.
Designed for stitching such products as tents, sails, harnesses, tarpaulins, safety belts, parachutes, balloons, industrial bags, boots, book bindings; auto, boat and furniture upholstery, sports and camping equipment, orthopedic appliances, suitcases, knapsacks, and outerwear made of extra heavy duty materials.
Designed for extra thick threads
FEATURES:
Large oscillating shuttle hook
Work space 16½" (420mm)
Reverse feed
Built-in bobbin winder
Cam take-up lever
Extra high presser lift for sewing extra heavy materials
Heavy balance wheel
Triple Transport (walking foot): Bottom, top and needle feed.
Suitable for sewing heavyweight materials such as canvas, vinyl, leather, synthetics and various coated, laminated and rubberized fabrics.
Appropriate for use in upholstery, footwear, leather, canvas industries.
Designed for stitching such products as tents, sails, harnesses, tarpaulins, safety belts, parachutes, balloons, industrial bags, boots, book bindings; auto, boat and furniture upholstery, sports and camping equipment, orthopedic appliances, suitcases, knapsacks, and outerwear made of extra heavy duty materials.
Designed for extra thick threads
FEATURES:
Large oscillating shuttle hook
Work space 16½" (420mm)
Reverse feed
Built-in bobbin winder
Cam take-up lever
Extra high presser lift for sewing extra heavy materials
Heavy balance wheel
Triple Transport (walking foot): Bottom, top and needle feed.
- 900 Stitches Per Minute
- Large Oscillating Shuttle Hook
- Includes Table, Stand, Motor Unassembled
- Industrial Sewing Machine
- REVERSE FEED
- BUILT-IN BOBBIN WINDER
- CAM TAKE-UP LEVER
- HEAVY BALANCE WHEEL
- WORK SPACE - 15 3/4"
- EXTRA HIGH FOOT LIFT - 1" (25.4mm)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
SPECIFICATIONS:Number of Needles 1 (Single)
Feeding Mechanism Walking Foot
Workspace Standard Workspace
Standard or Full Function Standard Functions
Speed, Max (S.P.M.) 1200
Stitch Length 2 1/2 s.p.i. (10mm)
Work Space 15 3/4" (400mm)
Needle 7 x 3
Bobbin Metal 28092 Prewound 33
Bed Size 26" 9 7/8" (660mm x 251mm)
Stitch Type 301
Needle Bar Stroke 2 13/64" (56mm)
Hook 28091C
Presser Lift 1" (25.4mm)
- 900 stitches per minute
- Large oscillating shuttle hook
- work space 15¾" (400mm)
- Reverse feed
- Built-in bobbin winder
- Cam take-up lever
- High presser lift for sewing extra heavy materials
- Heavy balance wheel
- Presser foot lift: 51/64"
- Needle bar stroke: 2"
- Maximum stitch length: 2-1/2" p.s.i.
- Needle: 214x1
- Metal bobbin: 28092
- Pre-wound bobbin: 33
- Shuttle hook: 28091C
- Work space: 15-3/4"
- Stitch type: 301
- Suitable for sewing heavyweight materials such as canvas, vinyl, leather, synthetics and various coated, laminated and rubberized fabrics
- Appropriate for use in upholstery, footwear, leather, canvas industries
- Designed for stitching such products as tents, sails, harnesses, tarpaulins, safety belts, parachutes, balloons, industrial bags, boots, book bindings; auto, boat and furniture upholstery, sports and camping equipment, orthopedic appliances, suitcases, knapsacks, and outerwear made of extra heavy duty materials
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Jiasew Real CS8700 High Speed Straight Lockstitch Sewing Machine 7x18-25/32" Bedsize (DDL8700) 11"Arm, 5.5/13mm Foot/KneeLift, KD*Power Stand 5500RPM
 7649: Jiasew Real CS8700 High Speed Straight Stitch Sewing Machine, KD*Power Stand |
Our Price: $599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
- This model is the most widely-used high speed single needle lockstitch sewing machine in range lockstitch sewing machine series.
- The machine features automatic lubrication,lever-type reverse feeding ,dialed stitch length regulator and bevel gear driving of arm shaft and hook shaft.
- The forked feeding mechanism engaged with link thread take-up and rotating hook produces tow thread take-up and rotating hook produces tow thread lockstitch .With its popular characteristics of nice uniform stitches,quiet sewing performance and minimum working vibration,it is available for sewing shirts,jackets,suits,overcoats, bedcovers and other garments.
- The machine is equipped with durable attachment socket for convenience to install all kinds of auxiliary tools such as edge-folder,positioner,etc.
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Sewing materials :medium weight
- Stitch length :0-5
- Height of :5.5/13
presser foot
- Needle :DBx1#14
- Sewing speed :5500 s.p.m.
- Motor :clutch motor
- Measurments :590x230x490
- Net weight :33/35.5
Jiasew Real KS8800DH-E2 Auto-trimmer Single Needle Direct Drive Lockstitch Industrial Sewing Machine Built-In Motor with Controller, Stand
 109539: Jiasew Real KS8800DH-E2 Auto-trimmer Single Needle Direct Drive Lockstitch Industrial Sewing Machine Built-In Motor with Controller, Stand |
Our Price: $799.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Auto-trimmer single needle direct drive lockstitch industrial sewing machine.
Non-US Warranty: 30 days parts and labor.
Specifications
- auto-trimmer with needle position
- soft start
- easy to operate
Jiasew CS-0302 (Gemsy G0718, Hoseki HK628, New Star AE-0302CX) Walking Foot Sewing Machine, Top & Bottom Feed, Unassembled Power Stand, Motor
 14749: Jiasew CS-0302 (G0718, HK628) Walking Foot Sewing Machine, Power Stand |
Our Price: $649.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Gemsy 0718 is a flat-bed style waking foot machine for use on medium & heavy weight materials.
Good for leather, vinyl and heavy work when straight stitching.
Add Optional Superior Welting Foot C32 Inside & Outside Single Cording Piping Foot for Walking Foot Top & Bottom Upholstery Machines where the outside foot walks!
It features a top feed walking foot and bottom feed system, with an alternating foot lift mechanism that is suitable to sew medium & medium-heavy weight materials such as leather, synthetics, canvas, plastics, webbing, upholstery, tarpaulin plus heavier than normal standard fabrics.
The balanced sewing machine head benefits from automatic lubrication to reduce wear & tear, resulting in improved durability, lower noise levels, smoother running and minimal maintenance costs.
The fitting of a large hook & base as standard, reduces the number of bobbin changes and helps when using the thicker threads associated with heavier than normal materials.
Thick sewing needles are used from size 110 up-to the extra thick size 180.
It comes complete with sewing machine table and motor. (Assembly is required)
Good for leather, vinyl and heavy work when straight stitching.
Add Optional Superior Welting Foot C32 Inside & Outside Single Cording Piping Foot for Walking Foot Top & Bottom Upholstery Machines where the outside foot walks!
It features a top feed walking foot and bottom feed system, with an alternating foot lift mechanism that is suitable to sew medium & medium-heavy weight materials such as leather, synthetics, canvas, plastics, webbing, upholstery, tarpaulin plus heavier than normal standard fabrics.
The balanced sewing machine head benefits from automatic lubrication to reduce wear & tear, resulting in improved durability, lower noise levels, smoother running and minimal maintenance costs.
The fitting of a large hook & base as standard, reduces the number of bobbin changes and helps when using the thicker threads associated with heavier than normal materials.
Thick sewing needles are used from size 110 up-to the extra thick size 180.
It comes complete with sewing machine table and motor. (Assembly is required)
- Large Hook & base
- Auto hook lubrication
- Auto head lubrication
- Reverse stitch lever
- Large stitch feature up-to 8mm
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Max sewing speed: 2000rpm
- Stitch length: 0-8mm
- Needle bar stroke: 35mm
- Presser foot lift by hand: 1/4" (6mm)
- Presser foot lift by foot: 1/2" (13mm)
- Height of presser foot :6/13mm
- Needle size: DPx17 #18-24
- Measurments :575x255x530mm
- Motor :clutch motor
- Net weight :25.5/30 kg
- Flat-bed style machine.
- Can sew very heavy materials .
- Low noise.
- Easy maintenance.
- Minimum difference in stitch length between forward and reverce feed.
- Top and bottom feed system.
- Foot alternating lift mechanism.
- for sewing leather,syntetic leather,canvas,etc.
- Warranty: 30 Days labor on defects in materials and workmanship.
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL 9000C-FSH Full Digital Tension, Foot Lift, Pressure, Thread Trim, Back Tack, Stitch Length, Feed Height, Direct Drive, Assembled Table
 85640: Juki DDL 9000C-FSH Digital Sewing Machine, Built In Motor, Assembled Table |
Our Price: $2,729.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
JUKI has digitalized the drive mechanism of the sewing machine which determines the "seam" quality, JUKI launches the new "direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer" DDL-9000CF.This is the newest flagship lockstitch machine. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed focus only on the operation panel according to the material to be sewn.Thanks to the digitalization, Optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
This is the newest flagship, fully digital type direct-drive, high-speed, lockstitch machine with an automatic thread trimmer. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
• Application: medium-weight materials
• Lubrication: semi-dry
• Max. sewing speed: 5000 st / min
• Max. stitch length: 5 mm
• Lift of the presser foot: by hand: 5.5 mm, by knee: 15 mm, auto: (1st stage) 5.0 mm (0.1～8.5 mm), (2nd stage) 8.5 mm (8.5～13.5 mm)
• Standard needle: DBx1 - DBx5 (#11) #9
This is the newest flagship, fully digital type direct-drive, high-speed, lockstitch machine with an automatic thread trimmer. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
• Application: medium-weight materials
• Lubrication: semi-dry
• Max. sewing speed: 5000 st / min
• Max. stitch length: 5 mm
• Lift of the presser foot: by hand: 5.5 mm, by knee: 15 mm, auto: (1st stage) 5.0 mm (0.1～8.5 mm), (2nd stage) 8.5 mm (8.5～13.5 mm)
• Standard needle: DBx1 - DBx5 (#11) #9
- #18 (Nm 65
- 110)
DDL-9000C is the world's first sewing machine which comes with a digital drive mechanism and facilitates data transfer through NFC technology. This model allows for numerical entry of key settings through the operation panel meaning many manual adjustments are no longer needed. For the DDL -9000CS (digital type) adjustment of the feed dog height, feed pitch and feed locus have been digitalized and are programmable. For the DDL-9000CF (full-digital type), adjustment not only of those mentioned above but also the presser foot pressure and needle thread tension have been digitalized. With this digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machine internal memory, or externally, and can be reproduced with ease. For sewing plants which produce diversified products using different materials this feature is quite helpful to achieve stable seam quality without time wasted on manual adjustments.
In today’s market many sewing plants have to handle dozens of kinds of materials. To get the best seams on any given product, maintenance experts and skilled operators must finely adjust sewing machines using tools such as a screwdriver or manual leavers and dials. Adjustment of all lockstitch machines in the plant requires an enormous amount of time and it is impossible to have the adjustment values perfectly reproduced across all machines.
DDL-9000C Series not only substantially reduces setup time but also reproduces adjustments exactly, meaning the machine is ideally suited to the material being sewn. In addition, once the best-suited settings are stored in memory they can be translated to other machines via USB or NFC connection.
Vertically and horizontally-driven digital feed mechanism
Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease in accordance to the material being sewn. Thanks to this digital feed mechanism thread trimming is carried out with the feed dog lowered which results in a stable remaining thread length. Also because the feed dog does not protrude above the throat plate when the sewing machine stops it avoids the material from being damaged by the feed dog.
Thread remaining on the material at the end of sewing as short as 3 mm
As well as the lowered feed dog, the groove cam system and the picker device are adopted to allow forcible release of the thread trimmer even if it locks, thereby securing the appropriate needle thread length and achieving stable length of thread remaining on the material.
Management, browsing and editing of data can be carried out via Android application
Data on sewing machine adjustments can be transferred to an Android tablet or phone via the Juki Smart App via NFC or micro USB. This allows all settings to be calibrate once and then replicated across all machines on one sewing line. The operation panel is also provided with a USB port for data storage, transfer and management; software updates can be carried out with ease using a USB thumb drive.
Custom functions can be programed to the hand switch
The functions programed to the hand switches can be set through the operation panel. Since the reverse-feed stitching lever is provided as standard additional functions that will be needed the most can be set. 20 different functions (needle-up/down correction sewing, reverse-feed correction sewing, 1-time reverse-feed stitching cancellation function, etc.) can all be allocated to the hand switch. Highly convenient operation is ensured when functions that are used the most are easily accessible.
Other Key Benefits for the DDL-9000C Include:
- Needle-thread active tension (full digital type)
- The presser foot pressure can be digitally controlled (full digital type)
- 4.3-inch large LCD touch panel (full digital type)
Computer-controlled Vertically and Horizontally-Driven Feed Mechanism
The world’s first feed mechanism which is driven both vertically and horizontally has been computerized. The feed mechanism changes its feed locus in accordance with the material. As a result, the optimum adjustments can be achieved only by setting data on the operation panel. Furthermore, the vertically-driven feed mechanism helps keep the length of the thread remaining on the material after thread trimming constant.
Remaining thread at the end of sewing reduced to 3mm
A both-blade driven rotary knife system is adopted. the knife intersects with the thread to trim it just beneath the needle entry point. Since the knife ensures constant length of needle thread, the length of thread remaining on the material after thread trimming is, unlike thread trimming with the thread tensed, also constant. The Juki DDL-9000CFMS inherits JUKI’s thread trimming technology to allow the thread trimmer to start up as soon as the pedal is depressed.
Sewing Machine management utilizing “IoT” (Internet of Things)
Data adjusted in a sample-making workshop etc. can be transferred without contact to the sewing machines in your factory using your tablet. (USB port is provided as standard)
Commitment to “seam quality”is poised to enter a new era with JUKI ’s next-generation sewing system.
The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.
Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly
suit the materials being sewn.
Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this sewing machine, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Exampl e : Needle-thread active tension demonstrates its effectiveness in the top stitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
Sewing specifications by garment or sewn product type
JUKI - DDL-9000C Lockstitch Machine
JUKI has launched its new direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer - the DDL-9000C. This is the newest flagship lockstitch machine from the world’s largest industrial sewing machine manufacturer. The machine has been digitalized to allow for easy adjustment of settings such as the feed mechanism, thread tension and the feed locus, all through the operation panel. Perfect parameters needed to achieve a high quality seams can be achieved digitally and key conditions do not need to be manually adjusted. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machines internal memory and can be reproduced with ease. For factories which produce diversified products using different materials, this feature is quite helpful to achieve stable seam quality in a time efficient manner.
Direct-drive, high-speed, sewing system with automatic thread trimmer
DDL-9000CSeries model comparison chart.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Machine Specifications:Application Medium-weight
Max. Sewing Speed 5,000 Stitches per Minute
Max. Stitch Length 5 mm
Needle Bar Stroke 30.7 mm
Lift of the Presser Foot - by Hand 5.5 mm
Lift of the Presser Foot - Auto 15 mm
Needle DBx1 (#11) #9 to #18 Capable
Feed Dog 4-row
Hook Automatic-Lubricating Full-Rotary Hook
Lubrication Automatic
Lubricating Oil Juki Machine Oil 7 (Equivalent to ISO VG7)
Control Box Integrated
Power Requirement Single-Phase 100
- 240V, 3-phase 200
- 240V
Power Consumption 520VA
Total Shipping Weight - Assembled 240 lbs
Juki DDL-9000C-F Safety Precautions
Juki DDL-9000C-F Instruction Manual
Juki DDL-9000C-F Parts List
-
Model: DDL-9000C-FMS
-
Type: Full Digital Type
-
Application: Medium-weight
-
Lubrication: Semi-dry
-
Max Sewing Speed: 5,000sti/min
-
Max Stitch Length: 5mm
-
Needle: DB×1・DB×5（#11） #9～#18（Nm65～110）
-
Lift of the presser foot:
-By hand: 5.5mm
-By knee: 15mm, Auto: 1st stage 5.0mm(※0.1～8.5mm), 2nd stage 8.5mm(※8.5mm～13.5mm) - ※Adjustable on the operation panel
Model Number Juki DDL-9000C-FMS
- Application Medium-Weight
- Lubrication Semi-Dry
- Lubricating Oil JUKI Machine Oil 7 (equivalent to ISO VG7)
- Max. Sewing Speed 5,000 sti/min
- Max. Stitch Length 5mm
- Needle Bar Stroke 30.7mm
- Feed Dog Height 0.8mm
- Needle DBX1 (#11)#9
- 18(NM65
- 110)
- Lift of the Presser foot By Hand: 5.5mm, By Knee: 15mm
- Auto: First Step 5.0mm (0.1
- 8.5mm)
- Second Step 8.5mm (8.5
- 13.5mm)
- Size of the Bed 517x178mm (distance from needto machine arm: 303mm)
- Bobbin Thread Winder Built-in the machine head
- Machine Head Drive Compact AC Servomotor (450W) that is directly connected to the main shaft (direct-drive system)
- Automatic reverse feed function Provided as Standard
- Power Consumption 520VA
- Net Weight Machine Head: 40kg / 40.5kg (with AK-154), Control Box: 6Kg
- Outside dimensions of package (mm) 712x313x767(0.171m3)
{Q} Re: Message: Can you lower the feed dogs on the (Juki) 9000c for free motion quilting? NO
{A} No free motion on the Juki 9000 series, but yes on the Juki J-150 that we have in stock below*: I don't know of any other industrial machine brand or model that has this feature! John
"One-Touch Switching to Free Motion Mode: The machine is equipped with a button for switching between straight stitch mode and free motion mode (feed dogs drop automatically)
Juki DDL-8100E Economy Straight Lockstitch Industrial Sewing Machine, Power Stand, Servo Motor, 11" Arm, 1/4-1/2in Foot LIft, 5mm Stitch Length
 Juki DDL-8100 Straight Lockstitch Industrial Sewing Machine/Power Stand, Servo Motor. 4500SPM |
Our Price: $799.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Same as old style DDL8500 DDL8700 w/o any extra accessories other than what is on the machine (bobbin, needle, foot), Includes Power Stand 4500SPM, 11" Arm Space to Right of Needle, 6mm/1/2" Presser Foot LIft, 5mm Stitch Length, 6SPI
The difference is the DDL8100 was built as an economy machine. It was released in Asia and in South America first to compete with lower priced machines from other manufacturers. It is lower speed, not meant for factory applications. It also comes with absolutely no accessories. No extra needles, no extra bobbins, no screwdrivers or other tools. It is a bare bones machine. Juki
11" Arm Space from Needle right to Neck, up to 4500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
The difference is the DDL8100 was built as an economy machine. It was released in Asia and in South America first to compete with lower priced machines from other manufacturers. It is lower speed, not meant for factory applications. It also comes with absolutely no accessories. No extra needles, no extra bobbins, no screwdrivers or other tools. It is a bare bones machine. Juki
11" Arm Space from Needle right to Neck, up to 4500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 4500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Includes Table, Stand, And 1/2hp Motor
- Industrial Sewing Machine for apparel/interior fabrics, not upholstery
Applications:
• For sewing light to medium-weight materials including
cotton, knits, polyester, nylon, sheer fabrics and denim.
• Suitable for stitching such products as blouses, shirts,
men's, ladies and children's apparel, uniforms, overalls,
lingerie, etc.
Features:
• Sewing mechanism that demonstrates outstanding responsiveness to materials to be sewn.
By thoroughly investigating and modifying the sewing mechanisms in order to achieve low-tension sewing, the machine flexibly responds to various kinds of materials and produces beautiful seams of consistent quality.
• The machine has been designed for reduced vibration and noise and upgraded reliability and durability.
By adopting a machine frame structure designed to obtain optimal balance and upgrade strength and rigidity, the machine runs with reduced vibration and noise.
• The machine has easy-to-operate functions to achieve improved operability.
By providing a presser foot with a higher lift (13mm), a light-touch stitch dial, and other easy-to-operate functions, the burden on the operator is lightened, and productivity is further increased.
The hand pulley has been designed to contain a deep recess to allow the operator to hold the pulley firmly and turn it with ease.
• The machine provided as standard with attachment mounting seats.
The machine is provided as standard with extra attachment mounting seats for attachment of new auxiliary parts in the future. The extremely high durability of the seats ensures an extended service with frequent replacement of attachments.
• The location of the hinge to prevent the sewing material from being caught by the hinge.
The hinge is located as such so as to prevent the material from being caught by it, thereby improving workability.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8000 Series Sewing MachinesClick HERE for Parts List Manual for Juki DDL-8000 Series Sewing Machine
- Up to 4500 stitches per minute
- Identical to and replaces DDL-8500 and 8300 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max.: 4,500 spm
- Stitch Length max.: 5 mm
- Presser Foot Lift by hand, max.: 5.5 mm; by knee, max. 13 mm
- Needle Bar Stroke 30.7 mm
- Hook: auto-lubricating full rotary hook
- Bedsize 7x18-25/32"
Juki DDL-8100e
Speed, Max (S.P.M.) : 4500*
Clearance Under Foot : (5.5 by hand, 13mm by knee)
Needle Bar Stroke : (30.7mm)
Stitch Length, Max. : (5mm)
Needle : DB x 1 (16 x 257) (16 x 230 for leather)
Feed dog : 3-Row
Bobbin - Metal
Hook : Auto-lubricating full-rotary hook
Bed Size : 7" x 18 25/32"
Workspace: 10 1/4"
How to assemble a Juki DDL 8100e industrial sewing machine onto the bench correctly. This video explains how to assemble the Juki 8100e into the bench including bobbin winder, belt guards, setting the knee lift mechanism and sorting out the oil in the oil sump. When we send out our machines we place them on a pallet so this should help any of our customers or other buyers to set up their new or second hand straight stitch machines to get them ready for sewing.Some Items may be different depending on country.
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL8700 Fully Assembled Ready To Sew Straight Stitch Sewing Machine, 7x18-25/32" Bedsize, Power Stand,11"Arm,1/2"Foot LIft,5mmSL,6SPI
 32885: Juki DDL-8700 Fully Assembled Ready To Sew Straight Stitch Sewing Machine, Stand, Servo Motor |
Our Price: $1,099.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Fully Assembled Ready to Sew! Complete with Table, Stand, 110V motor and Drawer. Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand with the oil pan installed, belt tension adjusted, belt guard installed, and sewn off, You only have to pour in the oil and set up the thread stand. It ships from Atlanta. John
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 5500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Industrial Sewing Machine for apparel and interior fabrics, not upholstery
- Includes Assembled Table, Plywood Top, Metal Stand, 1/2hp Clutch 110V Motor Installed
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8700 Sewing MachineClick HERE for Parts List Manual for Juki DDL-8700 Sewing Machine
- Up to 5500 stitches per minute
- Identical to and replaces DDL-8500 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max: 5,500 spm
- Stitch Length max: 5 mm
- Presser Foot Lift
-by hand, max: 5.5 mm
-by knee, max: 13 mm
- Needle Bar Stroke: 30.7 mm
- Hook: auto-lubricating full rotary hook
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL9000CSMS Straight Stitch Sewing Machine, Stand, Auto: Trim, Backtack, Foot Lift, Needle Position, Servo Motor, Built In Control Panel, Not FMS
 65247: Juki DDL-9000CS-M Sewing Machine, Stand, Auto Trim, Backtack, Foot Lift, Needle Position (Replaces 9000B) |
Our Price: $2,249.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Replaces Juki DDL 9000B, Like the Juki J-150QVP at $4000 which is limited to 2500SPM Stitches/Min because it is set up for slower free motion quilting, Juki DDL-9000C-FMS has the full speed range to 5000SPM, as featured on Next in Fashion Show on NETFLIX with Tan France and Alexa Chung at Click Here .
16mm Foot Lift, 5mm Stitch Length, 11" Arm Space, Hook Oil, Semi Dry Head No Oil, DC Direct Drive Servo Motor, Set Up Power Stand now with Built In Control Panel
Max. sewing speed: 5,000sti/min The sewing speed of 5000sti/min, which is the highest speed of any direct-drive lockstitch machines, contributes to increased productivity.
This DDL-9000CS-M is the current standard version of this machine with control panel built in to the head. . This is not the DDL9000C-FMS full digital model. This is the model that replaces DDL 9000B with separate control panel on top of the machine
FREE Box of 100 Organ Japan 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B, Juki DBx1 Needle System - Box of 100, 10 Packs of 10 each.
The DDL-9000B-S is the standard model developed with the emphasis on durability. It produces seams with consistency when run at speeds which falls in the range of the highest sewing speeds.
16mm Foot Lift, 5mm Stitch Length, 11" Arm Space, Hook Oil, Semi Dry Head No Oil, DC Direct Drive Servo Motor, Set Up Power Stand now with Built In Control Panel
Max. sewing speed: 5,000sti/min The sewing speed of 5000sti/min, which is the highest speed of any direct-drive lockstitch machines, contributes to increased productivity.
This DDL-9000CS-M is the current standard version of this machine with control panel built in to the head. . This is not the DDL9000C-FMS full digital model. This is the model that replaces DDL 9000B with separate control panel on top of the machine
FREE Box of 100 Organ Japan 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B, Juki DBx1 Needle System - Box of 100, 10 Packs of 10 each.
The DDL-9000B-S is the standard model developed with the emphasis on durability. It produces seams with consistency when run at speeds which falls in the range of the highest sewing speeds.
- Single Needle Lockstitch Sewing Machine
- Automatic Thread Trimming
- Semi Lubricating Full Rotary Hook
- High Presser Foot
- Push Type Reverse Switch
- Horizontal Thread Trimming System
- Maximum 4.5mm Stitch Length
- Easy Access Maintenance Capabilities
- Uses Organ DBx1 Needles same as 16x231
- MS – Semi-dry head type for Medium-Weight application
- WB – Wiper Provided
- AK141 – Auto Lifter Provided
- S – Single Phase 100-120V
Juki DDL-9000CS-M Direct-drive, High-speed, 1-needle Lockstitch Machine with Automatic Thread Trimmer
Juki DDL-9000CS-M Series is the premier 1-needle lockstitch machine with respect to functions, performance and design. This 1-needle lockstitch machine is JUKI's highly advanced model provided with a thread trimmer which operates at the highest speed of its kind, a mechanism which promises silent operation and advanced power saving features. This cutting-edge machine is a successor model of the DDL-9000 and DDL-9000A.
All of the three Juki DDL-9000CS-M series machine head types are friendly to the environment since they prevent oil stains and minimize the quantity of stain remover used. Select one of the three machine heads according to your sewing applications.
The DDL-9000CS-M has adopted the latest compact-size servomotor as its driving source. This latest compact-size servomotor is an energy-saving, highly efficient motor which is able to run under a high torque and has a broader range of speed. In addition, the servomotor is installed with a direct-drive system to transmit the motor power directly to the sewing machine, thereby achieving improved power-consumption saving, quicker response, quicker startup, increased accuracy of the stop position and stronger material penetrating force of the needle.
The newly-developed model totally eliminates "bird's nests at the starting of sewing", which have been a conventionally inevitable factor when using machines with a thread trimmer. The length of thread remaining at the end of sewing is shortened. With these two capabilities, the machine demonstrates its improved performance in the sewing of parts in which the starting and end points of a seam are visible, such as in the case of sewing name labels, topstitching and counterstitching collar bottoms.
Direct-drive, high-speed, sewing system with automatic thread trimmer
DDL-9000CSeries model comparison chart.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Single-needle lockstitch machines
- Automatic thread trimming
- Dry head machine designed without an oil pan, eliminating the need for lubrication and oil stains on fabric
- Semi-lubricating model which feeds clean oil to the hook and needle bar only, greatly reducing maintenance.
- The machine arm is now longer and higher, providing a wider work space for easy material handling, as well as increased view of the needle entry area.
- Higher presser foot lift up to 15 mm
- Stitch length up to 5 mm
- Push-type reverse feed switch
- Horizontal thread trimming system
- Feed and presser mechanisms offer extremely smooth and even sewing, while the direct-drive motor systems accounts for quiet operation and reduction in vibration levels.
- Large, easy to operate hand wheel
- Micro-presser-lifter mechanism for sewing slippery and stretch materials
- Tension regulating knob with calibrations and presser spring regulator
- Easy access maintenance capabilities
Functions and utilization of the sewing machine with an automatic thread trimmer. JUKI Magazine(International) Vol.5
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL-9000BHS Heavy Duty Sewing Machine Dry Head-Only, Auto Trim, Backtack, Foot Lift, Needle Position, Servo Motor, AD141/CP18 Control Panel,100N*
 |
Our Price: $1,949.00 Prices are subject to change, and only current prices will be honored. Availability: Limited Stock Condition: New In Box |
Features
*Bonus Box of 100 Organ 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B, Juki DBx1 Needle System - Box of 100, 10 Packs of 10 each.
Max. sewing speed: 5,000 stitches per minute. This sewing speed is the highest speed of any direct-drive lockstitch machines, and contributes to increased productivity.
*This DDL-9000BSS is the current standard version of this machine. The DDL-9000BHS under Related Items on this page is the H "heavy" duty version of this machine. Heavier feed dog with bigger and fewer teeth, larger needle hole plate, can take larger needles up to size 22, with slightly higher needle bar stroke for thicker materials. Price is the same for both versions. John Douthat
The DDL-9000B-S is the standard model developed with the emphasis on durability. It produces seams with consistency when run at speeds which falls in the range of the highest sewing speeds.
Max. sewing speed: 5,000 stitches per minute. This sewing speed is the highest speed of any direct-drive lockstitch machines, and contributes to increased productivity.
*This DDL-9000BSS is the current standard version of this machine. The DDL-9000BHS under Related Items on this page is the H "heavy" duty version of this machine. Heavier feed dog with bigger and fewer teeth, larger needle hole plate, can take larger needles up to size 22, with slightly higher needle bar stroke for thicker materials. Price is the same for both versions. John Douthat
The DDL-9000B-S is the standard model developed with the emphasis on durability. It produces seams with consistency when run at speeds which falls in the range of the highest sewing speeds.
- Single Needle Lockstitch Sewing Machine
- Automatic Thread Trimming
- Semi Lubricating Full Rotary Hook
- High Presser Foot
- Push Type Reverse Switch
- Horizontal Thread Trimming System
- Maximum 4.5mm Stitch Length
- Easy Access Maintenance Capabilities
- Uses Organ DBx1 Needles same as 16x231
- MS – Semi-dry head type for Medium-Weight application
- WB – Wiper Provided
- AK141 – Auto Lifter Provided
- S – Single Phase 100-120V
Juki DDL9000B Direct-drive, High-speed, 1-needle Lockstitch Machine with Automatic Thread Trimmer
The Juki DDL-9000B Series is the premier 1-needle lockstitch machine with respect to functions, performance and design. This 1-needle lockstitch machine is JUKI's highly advanced model provided with a thread trimmer which operates at the highest speed of its kind, a mechanism which promises silent operation and advanced power saving features. This cutting-edge machine is a successor model of the DDL-9000 and DDL-9000A.
All of the three DDL-9000B series machine head types are friendly to the environment since they prevent oil stains and minimize the quantity of stain remover used. Select one of the three machine heads according to your sewing applications.
The DDL-9000B has adopted the latest compact-size servomotor as its driving source. This latest compact-size servomotor is an energy-saving, highly efficient motor which is able to run under a high torque and has a broader range of speed. In addition, the servomotor is installed with a direct-drive system to transmit the motor power directly to the sewing machine, thereby achieving improved power-consumption saving, quicker response, quicker startup, increased accuracy of the stop position and stronger material penetrating force of the needle.
The newly-developed model totally eliminates "bird's nests at the starting of sewing", which have been a conventionally inevitable factor when using machines with a thread trimmer. The length of thread remaining at the end of sewing is shortened. With these two capabilities, the machine demonstrates its improved performance in the sewing of parts in which the starting and end points of a seam are visible, such as in the case of sewing name labels, topstitching and counterstitching collar bottoms.
{Q} Re: Message: Can you lower the feed dogs on the (Juki) 9000c for free motion quilting? NO
{A} No free motion on the Juki 9000 series, but yes on the Juki J-150 that we have in stock below*: I don't know of any other industrial machine brand or model that has this feature! John
"One-Touch Switching to Free Motion Mode: The machine is equipped with a button for switching between straight stitch mode and free motion mode (feed dogs drop automatically)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Direct-drive, High-speed, 1-needle, Lockstitch Machine DDL-9000B SeriesBrochure on Juki DDL-9000B Series
Instruction Manual for DDL-9000B Series
- Single-needle lockstitch machines
- Automatic thread trimming
- Dry head machine designed without an oil pan, eliminating the need for lubrication and oil stains on fabric
- Semi-lubricating model which feeds clean oil to the hook and needle bar only, greatly reducing maintenance.
- The machine arm is now longer and higher, providing a wider work space for easy material handling, as well as increased view of the needle entry area.
- Higher presser foot lift up to 15 mm
- Stitch length up to 5 mm
- Push-type reverse feed switch
- Horizontal thread trimming system
- Feed and presser mechanisms offer extremely smooth and even sewing, while the direct-drive motor systems accounts for quiet operation and reduction in vibration levels.
- Large, easy to operate hand wheel
- Micro-presser-lifter mechanism for sewing slippery and stretch materials
- Tension regulating knob with calibrations and presser spring regulator
- Easy access maintenance capabilities
Videos on Juki DDL-9000 Series
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL-9000BSH Straight Lockstitch Industrial Sewing Machine with Stand, Auto Trim, Backtack, Foot Lift, Needle Position
|
Our Price: $2,299.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*Bonus Box of 100 Organ 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B, Juki DBx1 Needle System - Box of 100, 10 Packs of 10 each.
Max. sewing speed: 5,000 stitches per minute. This sewing speed is the highest speed of any direct-drive lockstitch machines, and contributes to increased productivity.
*This DDL-9000BSS is the current standard version of this machine. The DDL-9000BHS under Related Items on this page is the H "heavy" duty version of this machine. Heavier feed dog with bigger and fewer teeth, larger needle hole plate, can take larger needles up to size 22, with slightly higher needle bar stroke for thicker materials. Price is the same for both versions. John Douthat
The DDL-9000B-S is the standard model developed with the emphasis on durability. It produces seams with consistency when run at speeds which falls in the range of the highest sewing speeds.
Max. sewing speed: 5,000 stitches per minute. This sewing speed is the highest speed of any direct-drive lockstitch machines, and contributes to increased productivity.
*This DDL-9000BSS is the current standard version of this machine. The DDL-9000BHS under Related Items on this page is the H "heavy" duty version of this machine. Heavier feed dog with bigger and fewer teeth, larger needle hole plate, can take larger needles up to size 22, with slightly higher needle bar stroke for thicker materials. Price is the same for both versions. John Douthat
The DDL-9000B-S is the standard model developed with the emphasis on durability. It produces seams with consistency when run at speeds which falls in the range of the highest sewing speeds.
- Single Needle Lockstitch Sewing Machine
- Automatic Thread Trimming
- Semi Lubricating Full Rotary Hook
- High Presser Foot
- Push Type Reverse Switch
- Horizontal Thread Trimming System
- Maximum 4.5mm Stitch Length
- Easy Access Maintenance Capabilities
- Uses Organ DBx1 Needles same as 16x231
- MS – Semi-dry head type for Medium-Weight application
- WB – Wiper Provided
- AK141 – Auto Lifter Provided
- S – Single Phase 100-120V
Juki DDL9000B Direct-drive, High-speed, 1-needle Lockstitch Machine with Automatic Thread Trimmer
The Juki DDL-9000B Series is the premier 1-needle lockstitch machine with respect to functions, performance and design. This 1-needle lockstitch machine is JUKI's highly advanced model provided with a thread trimmer which operates at the highest speed of its kind, a mechanism which promises silent operation and advanced power saving features. This cutting-edge machine is a successor model of the DDL-9000 and DDL-9000A.
All of the three DDL-9000B series machine head types are friendly to the environment since they prevent oil stains and minimize the quantity of stain remover used. Select one of the three machine heads according to your sewing applications.
The DDL-9000B has adopted the latest compact-size servomotor as its driving source. This latest compact-size servomotor is an energy-saving, highly efficient motor which is able to run under a high torque and has a broader range of speed. In addition, the servomotor is installed with a direct-drive system to transmit the motor power directly to the sewing machine, thereby achieving improved power-consumption saving, quicker response, quicker startup, increased accuracy of the stop position and stronger material penetrating force of the needle.
The newly-developed model totally eliminates "bird's nests at the starting of sewing", which have been a conventionally inevitable factor when using machines with a thread trimmer. The length of thread remaining at the end of sewing is shortened. With these two capabilities, the machine demonstrates its improved performance in the sewing of parts in which the starting and end points of a seam are visible, such as in the case of sewing name labels, topstitching and counterstitching collar bottoms.
{Q} Re: Message: Can you lower the feed dogs on the (Juki) 9000c for free motion quilting? NO
{A} No free motion on the Juki 9000 series, but yes on the Juki J-150 that we have in stock below*: I don't know of any other industrial machine brand or model that has this feature! John
"One-Touch Switching to Free Motion Mode: The machine is equipped with a button for switching between straight stitch mode and free motion mode (feed dogs drop automatically)
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Direct-drive, High-speed, 1-needle, Lockstitch Machine DDL-9000B SeriesBrochure on Juki DDL-9000B Series
Instruction Manual for DDL-9000B Series
- Single-needle lockstitch machines
- Automatic thread trimming
- Dry head machine designed without an oil pan, eliminating the need for lubrication and oil stains on fabric
- Semi-lubricating model which feeds clean oil to the hook and needle bar only, greatly reducing maintenance.
- The machine arm is now longer and higher, providing a wider work space for easy material handling, as well as increased view of the needle entry area.
- Higher presser foot lift up to 15 mm
- Stitch length up to 5 mm
- Push-type reverse feed switch
- Horizontal thread trimming system
- Feed and presser mechanisms offer extremely smooth and even sewing, while the direct-drive motor systems accounts for quiet operation and reduction in vibration levels.
- Large, easy to operate hand wheel
- Micro-presser-lifter mechanism for sewing slippery and stretch materials
- Tension regulating knob with calibrations and presser spring regulator
- Easy access maintenance capabilities
Videos on Juki DDL-9000 Series
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL9000C-FMS Full Digital Tension, Pressure, Foot Lift, Trimmers, BackTack, Needle Pos, Stitch Length, FeedHeight, DirectDrive, ControlBox, Table
81922: Juki DDL-9000C-FMS Full Digital Sewing Machine, Built In Motor, Control Box, Assembled Stand |
Our Price: $2,999.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Like the Juki J-150QVP at $4000 which is limited to 2500SPM Stitches/Min because it is set up for slower free motion quilting, Juki DDL-9000C-FMS has the full speed range to 5000SPM, as featured on Next in Fashion Show on NETFLIX with Tan France and Alexa Chung at Click Here
Juki DDL-9000C-FMS:
Full Digital Controls
Digital Thread Tension Control
Digital Foot Pressure Control
Sewing Parameter Setting, Saving and Recall
Automatic Thread Trimmer
Automatic Back Tack Settings
Automatic Foot Lift
4.3" Full Color Touch-Screen Digital Control Panel
JUKI has digitalized the drive mechanism of the sewing machine which determines the "seam" quality, JUKI launches the new "direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer" DDL-9000CF.This is the newest flagship lockstitch machine. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed focus only on the operation panel according to the material to be sewn.Thanks to the digitalization, Optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
This is the newest flagship, fully digital type direct-drive, high-speed, lockstitch machine with an automatic thread trimmer. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
• Application: medium-weight materials
• Lubrication: semi-dry
• Max. sewing speed: 5000 st / min
• Max. stitch length: 5 mm
• Lift of the presser foot: by hand: 5.5 mm, by knee: 15 mm, auto: (1st stage) 5.0 mm (0.1～8.5 mm), (2nd stage) 8.5 mm (8.5～13.5 mm)
• Standard needle: DBx1 - DBx5 (#11) #9
Juki DDL-9000C-FMS:
Full Digital Controls
Digital Thread Tension Control
Digital Foot Pressure Control
Sewing Parameter Setting, Saving and Recall
Automatic Thread Trimmer
Automatic Back Tack Settings
Automatic Foot Lift
4.3" Full Color Touch-Screen Digital Control Panel
JUKI has digitalized the drive mechanism of the sewing machine which determines the "seam" quality, JUKI launches the new "direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer" DDL-9000CF.This is the newest flagship lockstitch machine. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed focus only on the operation panel according to the material to be sewn.Thanks to the digitalization, Optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
This is the newest flagship, fully digital type direct-drive, high-speed, lockstitch machine with an automatic thread trimmer. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
• Application: medium-weight materials
• Lubrication: semi-dry
• Max. sewing speed: 5000 st / min
• Max. stitch length: 5 mm
• Lift of the presser foot: by hand: 5.5 mm, by knee: 15 mm, auto: (1st stage) 5.0 mm (0.1～8.5 mm), (2nd stage) 8.5 mm (8.5～13.5 mm)
• Standard needle: DBx1 - DBx5 (#11) #9
- #18 (Nm 65
- 110)
DDL-9000C is the world's first sewing machine which comes with a digital drive mechanism and facilitates data transfer through NFC technology. This model allows for numerical entry of key settings through the operation panel meaning many manual adjustments are no longer needed. For the DDL -9000CS (digital type) adjustment of the feed dog height, feed pitch and feed locus have been digitalized and are programmable. For the DDL-9000CF (full-digital type), adjustment not only of those mentioned above but also the presser foot pressure and needle thread tension have been digitalized. With this digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machine internal memory, or externally, and can be reproduced with ease. For sewing plants which produce diversified products using different materials this feature is quite helpful to achieve stable seam quality without time wasted on manual adjustments.
In today’s market many sewing plants have to handle dozens of kinds of materials. To get the best seams on any given product, maintenance experts and skilled operators must finely adjust sewing machines using tools such as a screwdriver or manual leavers and dials. Adjustment of all lockstitch machines in the plant requires an enormous amount of time and it is impossible to have the adjustment values perfectly reproduced across all machines.
DDL-9000C Series not only substantially reduces setup time but also reproduces adjustments exactly, meaning the machine is ideally suited to the material being sewn. In addition, once the best-suited settings are stored in memory they can be translated to other machines via USB or NFC connection.
Vertically and horizontally-driven digital feed mechanism
Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease in accordance to the material being sewn. Thanks to this digital feed mechanism thread trimming is carried out with the feed dog lowered which results in a stable remaining thread length. Also because the feed dog does not protrude above the throat plate when the sewing machine stops it avoids the material from being damaged by the feed dog.
Thread remaining on the material at the end of sewing as short as 3 mm
As well as the lowered feed dog, the groove cam system and the picker device are adopted to allow forcible release of the thread trimmer even if it locks, thereby securing the appropriate needle thread length and achieving stable length of thread remaining on the material.
Management, browsing and editing of data can be carried out via Android application
Data on sewing machine adjustments can be transferred to an Android tablet or phone via the Juki Smart App via NFC or micro USB. This allows all settings to be calibrate once and then replicated across all machines on one sewing line. The operation panel is also provided with a USB port for data storage, transfer and management; software updates can be carried out with ease using a USB thumb drive.
Custom functions can be programed to the hand switch
The functions programed to the hand switches can be set through the operation panel. Since the reverse-feed stitching lever is provided as standard additional functions that will be needed the most can be set. 20 different functions (needle-up/down correction sewing, reverse-feed correction sewing, 1-time reverse-feed stitching cancellation function, etc.) can all be allocated to the hand switch. Highly convenient operation is ensured when functions that are used the most are easily accessible.
Other Key Benefits for the DDL-9000C Include:
- Needle-thread active tension (full digital type)
- The presser foot pressure can be digitally controlled (full digital type)
- 4.3-inch large LCD touch panel (full digital type)
Computer-controlled Vertically and Horizontally-Driven Feed Mechanism
The world’s first feed mechanism which is driven both vertically and horizontally has been computerized. The feed mechanism changes its feed locus in accordance with the material. As a result, the optimum adjustments can be achieved only by setting data on the operation panel. Furthermore, the vertically-driven feed mechanism helps keep the length of the thread remaining on the material after thread trimming constant.
Remaining thread at the end of sewing reduced to 3mm
A both-blade driven rotary knife system is adopted. the knife intersects with the thread to trim it just beneath the needle entry point. Since the knife ensures constant length of needle thread, the length of thread remaining on the material after thread trimming is, unlike thread trimming with the thread tensed, also constant. The Juki DDL-9000CFMS inherits JUKI’s thread trimming technology to allow the thread trimmer to start up as soon as the pedal is depressed.
Sewing Machine management utilizing “IoT” (Internet of Things)
Data adjusted in a sample-making workshop etc. can be transferred without contact to the sewing machines in your factory using your tablet. (USB port is provided as standard)
Commitment to “seam quality”is poised to enter a new era with JUKI ’s next-generation sewing system.
The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.
Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly
suit the materials being sewn.
Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this sewing machine, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Exampl e : Needle-thread active tension demonstrates its effectiveness in the top stitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
Sewing specifications by garment or sewn product type
JUKI - DDL-9000C Lockstitch Machine
JUKI has launched its new direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer - the DDL-9000C. This is the newest flagship lockstitch machine from the world’s largest industrial sewing machine manufacturer. The machine has been digitalized to allow for easy adjustment of settings such as the feed mechanism, thread tension and the feed locus, all through the operation panel. Perfect parameters needed to achieve a high quality seams can be achieved digitally and key conditions do not need to be manually adjusted. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machines internal memory and can be reproduced with ease. For factories which produce diversified products using different materials, this feature is quite helpful to achieve stable seam quality in a time efficient manner.
Direct-drive, high-speed, sewing system with automatic thread trimmer
DDL-9000CSeries model comparison chart.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Machine Specifications:Application Medium-weight
Max. Sewing Speed 5,000 Stitches per Minute
Max. Stitch Length 5 mm
Needle Bar Stroke 30.7 mm
Lift of the Presser Foot - by Hand 5.5 mm
Lift of the Presser Foot - Auto 15 mm
Needle DBx1 (#11) #9 to #18 Capable
Feed Dog 4-row
Hook Automatic-Lubricating Full-Rotary Hook
Lubrication Automatic
Lubricating Oil Juki Machine Oil 7 (Equivalent to ISO VG7)
Control Box Integrated
Power Requirement Single-Phase 100
- 240V, 3-phase 200
- 240V
Power Consumption 520VA
Total Shipping Weight - Table Top and Stand 240 lbs
Juki DDL-9000C-F Safety Precautions
Juki DDL-9000C-F Instruction Manual
Juki DDL-9000C-F Parts List
-
Model: DDL-9000C-FMS
-
Type: Full Digital Type
-
Application: Medium-weight
-
Lubrication: Semi-dry
-
Max Sewing Speed: 5,000sti/min
-
Max Stitch Length: 5mm
-
Needle: DB×1・DB×5（#11） #9～#18（Nm65～110）
-
Lift of the presser foot:
-By hand: 5.5mm
-By knee: 15mm, Auto: 1st stage 5.0mm(※0.1～8.5mm), 2nd stage 8.5mm(※8.5mm～13.5mm) - ※Adjustable on the operation panel
Model Number Juki DDL-9000C-FMS
- Application Medium-Weight
- Lubrication Semi-Dry
- Lubricating Oil JUKI Machine Oil 7 (equivalent to ISO VG7)
- Max. Sewing Speed 5,000 sti/min
- Max. Stitch Length 5mm
- Needle Bar Stroke 30.7mm
- Feed Dog Height 0.8mm
- Needle DBX1 (#11)#9
- 18(NM65
- 110)
- Lift of the Presser foot By Hand: 5.5mm, By Knee: 15mm
- Auto: First Step 5.0mm (0.1
- 8.5mm)
- Second Step 8.5mm (8.5
- 13.5mm)
- Size of the Bed 517x178mm (distance from needto machine arm: 303mm)
- Bobbin Thread Winder Built-in the machine head
- Machine Head Drive Compact AC Servomotor (450W) that is directly connected to the main shaft (direct-drive system)
- Automatic reverse feed function Provided as Standard
- Power Consumption 520VA
- Net Weight Machine Head: 40kg / 40.5kg (with AK-154), Control Box: 6Kg
- Outside dimensions of package (mm) 712x313x767(0.171m3)
Application Medium-weight
Max. Sewing Speed 5,000 Stitches per Minute
Max. Stitch Length 5 mm
Needle Bar Stroke 30.7 mm
Lift of the Presser Foot - by Hand 5.5 mm
Lift of the Presser Foot - Auto 15 mm
Needle DBx1 (#11) #9 to #18 Capable
Feed Dog 4-row
Hook Automatic-Lubricating Full-Rotary Hook
Lubrication Automatic
Lubricating Oil Juki Machine Oil 7 (Equivalent to ISO VG7)
Control Box Integrated
Power Requirement Single-Phase 100 - 240V, 3-phase 200
- 240V
Power Consumption 520VA
Total Shipping Weight - 240 lbs
Juki DDL-5550N High Speed Straight LockStitch Industrial Sewing Machine Head Only 7x18.5" Flat Bed Size Dimensions, Made in Japan
 32315: Juki DDL5550N High Speed Straight Stitch Sewing Machine Head Only |
Our Price: $599.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*FREE $30 Organ Japan 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B and Juki DBx1 Needle System - Box of 100, Packs of 10
-
Brand: Juki
-
Application: For light-medium weight materials
-
Bed Size: 517mm x 178mm
-
Feed Dog: 3-Row
-
Hook: Automatic-lubricating full-rotary hook
-
Max. Sewing Speed: 5500 rpm/spm
-
Max. Stitch length: 5mm
-
Thread take-up: Slide Type
- Needle System (at time of delivery): DB x 1(#14)#9
- #18 For JE:134(Nm90)
-
Lubrication: Fully automatic lubrication system by means of plunger pump
-
Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
-
Lift of Presser Foot by Hand: 5.5 mm
-
Lift of Presser Foot by Knee: 13 mm
-
Weight of Machine Head: 75 LBS.
-
Thread Material: Polyester
-
Made In: Japan
Bed Size is 7" x 18 25/32"
Juki DDL-5550 Review
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Please click here for DDL-5550,DDL-5530 Instruction Manual (.pdf)Download PDF on Juki DDL5550N Series
Please review our Freight LTL shipping Policies
Juki DDL5550N Sewing Machine JAPAN. +Power Stand, Table & Motor, Fully Assembled Ready To Sew
 32886: Juki DDL5550N Sewing Machine Japan, Power Stand, Fully Assembled Ready To Sew |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off, You only have to set up the thread stand. It ships from Atlanta
Complete with Table, Stand, Motor and Drawer. The thread take-up mechanism, feed mechanism, thread paths and hook have been further improved to enhance responsiveness to material changes and to ensure consistent stitch quality
Complete with Table, Stand, Motor and Drawer. The thread take-up mechanism, feed mechanism, thread paths and hook have been further improved to enhance responsiveness to material changes and to ensure consistent stitch quality
-
Brand: Juki
-
Application: For light-medium weight materials
-
Bed Size: 517mm x 178mm
-
Feed Dog: 3-Row
-
Hook: Automatic-lubricating full-rotary hook
-
Max. Sewing Speed: 5500 rpm/spm
-
Max. Stitch length: 5mm
-
Thread take-up: Slide Type
- Needle System (at time of delivery): DB x 1(#14)#9
- #18 For JE:134(Nm90)
-
Lubrication: Fully automatic lubrication system by means of plunger pump
-
Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
-
Lift of Presser Foot by Hand: 5.5 mm
-
Lift of Presser Foot by Knee: 13 mm
-
Weight of Machine Head: 75 LBS.
-
Thread Material: Polyester
- Made In: Japan
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Machine Specifications:-
Application: For medium weight materials.
-
Max Sewing Speed: 5,500 stitches per minute
-
Max Stitch Length: 4mm
-
Needle bar stroke: 30.7mm
-
Lift of the presser foot by hand: 5.5mm
-
Lift of the presser foot by knee: 13mm
-
Needle (at the time of delivery): DBX1 (#14) – For JE: 134 (Nm75)
-
Hook: Automatic-lubricating full-rotary hook
-
Lubrication: Automatic
-
Lubricating oil: Juki New Defrix Oil No. 1
Please click here for DDL-5550,DDL-5530 Instruction Manual (.pdf)
Download PDF on Juki DDL5550N Series
Please review our Freight LTL shipping Policies
Juki DDL-8100E Economy Straight Stitch Industrial Sewing Machine Head Only, 7x18-25/32" Bedsize, 11" Arm, 1/2" Foot LIft, up to 5mm Stitch Length 6SPI
 Juki DDL8100E Straight Lockstitch Industrial Sewing Machine Head Only |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
* FREE Organ Japan 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B and Juki DBx1 Needle System - Box of 100. Packs of 10
11" Arm Space from Needle right to Neck, up to 4500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
11" Arm Space from Needle right to Neck, up to 4500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 4500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Industrial Sewing Machine for apparel/interior fabrics, not upholstery
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8000 Series Sewing MachinesClick HERE for Parts List Manual for Juki DDL-8000 Series Sewing Machines
- Up to 4500 stitches per minute
- Identical to and replaces DDL-8500 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max.: 5,500 spm
- Stitch Length max.: 5 mm
- Presser Foot Lift by hand, max.: 5.5 mm; by knee, max. 13 mm
- Needle Bar Stroke 30.7 mm
- Hook: auto-lubricating full rotary hook
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Assembly instructions in case you order an optional table, stand, and motor
Juki DDL8700 Straight Stitch Industrial Sewing Machine Head, 7x18-25/32" Bedsize, 11" Arm, 1/2" Foot LIft, up to 5mm Stitch Length 6SPI, 100 Needles
 80363: Juki DDL8700 Straight Lockstitch Industrial Sewing Machine Head Only |
Our Price: $599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
* FREE Organ Japan 16x231 Regular Sharp Industrial Sewing Machine Needles, same as 16x257, 16x71, JLx1B and Juki DBx1 Needle System - Box of 100. Packs of 10
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 5500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Industrial Sewing Machine for apparel/interior fabrics, not upholstery
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8700 Sewing MachineClick HERE for Parts List Manual for Juki DDL-8700 Sewing Machine
- Up to 5500 stitches per minute
- Identical to and replaces DDL-8500 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max.: 5,500 spm
- Stitch Length max.: 5 mm
- Presser Foot Lift by hand, max.: 5.5 mm; by knee, max. 13 mm
- Needle Bar Stroke 30.7 mm
- Hook: auto-lubricating full rotary hook
Assembly Video for Juki DDL8700
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL-8700 Straight Stitch Industrial Sewing Machine, Power Stand 5500SPM Servo Motor, 11"Arm, 1/2"Foot LIft, 5mm Stitch Length, Bonus 100 Needles
2513: Juki DDL8700 Straight Lockstitch Industrial Sewing Machine, Servo Motor Power Stand |
Our Price: $829.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
11" Arm Space from Needle right to Neck, up to 5500 SPM Stitches per Minute, up to 1/2" Presser Foot Lift by Knee, up to 5mm Stitch Length, down to 6 SPI Stitches Per Inch
- Servo Motor
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 5500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee Lever
- 1/4 Inch Foot Lift by Hand Lever
- Maximum 5mm Stitch Length at the longest stitch length setting
- Minimum 6 Stitches Per Inch at the longest stitch length setting.
- Includes Table, Stand, And 1/2hp Motor
- Industrial Sewing Machine for apparel/interior fabrics, not upholstery
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Instruction Book Operating Manual for Juki DDL-8700 Sewing MachineClick HERE for Parts List Manual for Juki DDL-8700 Sewing Machine
- Up to 5500 stitches per minute
- Identical to and replaces DDL-8500 models
- Replaces popular DDL-MS and DDL-888 models, but has more speed
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 stitches per inch.
- Needles: 9-18 DBX1 (16x231) up to size 19
- Sewing Speed max.: 5,500 spm
- Stitch Length max.: 5 mm
- Presser Foot Lift by hand, max.: 5.5 mm; by knee, max. 13 mm
- Needle Bar Stroke 30.7 mm
- Hook: auto-lubricating full rotary hook
- Bedsize 7x18-25/32"
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL8700-7-WB AK CP18 Auto Backtack, Thread Trim, Foot Lift & Needle Positioner Industrial Sewing Machine, Bedsize 7x18-25/32" Servo Motor, Stand
 2508: Juki DDL8700-7-WB AK CP18 Auto Backtack, Thread Trim, Foot Lift & Needle Positioner Industrial Sewing Machine, Bedsize 7x18-25/32" Servo Motor, Stand |
Our Price: $2,249.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Juki DDL8700-7-WB Auto Backtack Thread Trim Foot Lift Machine/Stand is a wonderful addition to your sewing room if you looking for an industrial type machine with a control panel.
The control box is SC920CD-AA4, Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Juki DDL8700-7-WB Auto Backtack Thread Trim Foot Lift Machine/Stand is a wonderful addition to your sewing room if you looking for an industrial type machine with a control panel.
The control box is SC920CD-AA4, Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
- DDL-8700-7/SC920C/M92
- 4,500-5,000 Max Sewing Speed
- 4.5mm Stitch Length
- Non Rotating Bobbin Device
- Automatic Thread Trimmer
- Automatic Backtack
- Automatic Foot Lift
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki DDL-8700-7/SC-920C/M92 Catalog Brochure PDFClick HERE for Juki DDL8700-7 Specifications and Options
Juki DDL-8700B-7 Instruction Manual PDF
Juki DDL-8700B-7 Instruction Manual PDF
- 1-Needle, lockstitch, machine with new non-rotating bobbin device, automatic thread trimmer, auto foot lift and new servo motor.
- Sewing quality is even and consistent with the non-rotating bobbin device, composed of a special hook, bobbin and bobbin case
- Bobbin thread tension remains constant and thread remains tight when trimmed
- 5,000 maximum sewing speed
- 4.5mm stitch length
- Non rotating bobbin device
- Automatic thread trimmer
- Presser foot lift by hand, 5.5 mm; by knee, 13 mm
- Needle bar stroke 30.7 mm
- Hook auto lubricating full rotary hook
Functions and utilization of the sewing machine with an automatic thread trimmer. JUKI Magazine(International) Vol.5
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DDL8700-7-WB AK CP18 Auto Needle Positioner, Backtack, Thread Trim, & Foot Lift Sewing Machine, Stand, Servo Motor, Fully Assembled, Ready to Sew
59962: Juki DDL8700-7-WB AK CP18 Backtack, Thread Trim, Foot Lift, Sewing Machine/Stand, Fully Assembled, Ready to Sew |
Our Price: $2,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand with the oil pan installed, belt tension adjusted, belt guard installed, and sewn off, You only have to pour in the oil and set up the thread stand. It ships from Atlanta.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
Juki's latest DDL8700-7 below has automatic needle positioner up, auto back tack reverse, auto thread trim, and auto foot lift which eliminates so many hand operations in turning the handwheel, pressing the reverse lever, using scissors to cut thread, and using the presser foot lifter or knee lever to raise the presser foot to insert and remove fabrics. DDL-7 models automate those manual tasks, although the manual functions and controls are all still there in case you need them.
Industrial Sewing Machine & Stand, 11" Arm Space from Needle to Neck, up to 5500 SPM Stitches per Minute, 5.5-13mm 1/2" Presser Foot LIft by Lever/Knee, Needle Positioner, up to 4mm Stitch Length, down to 6 SPi Stitches Per Inch, Stand, Auto Oil, Servo Motor.
- DDL-8700-7/SC920C/M92
- 4,500-5,000 Max Sewing Speed
- 4.5mm Stitch Length
- Non Rotating Bobbin Device
- Automatic Thread Trimmer
- Automatic Backtack
- Automatic Foot Lift
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki DDL-8700-7/SC-920C/M92 Catalog Brochure PDFClick HERE for Juki DDL8700-7 Specifications and Options
Juki DDL-8700B-7 Instruction Manual PDF
Juki DDL-8700B-7 Instruction Manual PDF
- 1-Needle, lockstitch, machine with new non-rotating bobbin device, automatic thread trimmer, auto foot lift and new servo motor.
- Sewing quality is even and consistent with the non-rotating bobbin device, composed of a special hook, bobbin and bobbin case
- Bobbin thread tension remains constant and thread remains tight when trimmed
- 5,000 maximum sewing speed
- 4.5mm stitch length
- Non rotating bobbin device
- Automatic thread trimmer
- Presser foot lift by hand, 5.5 mm; by knee, 13 mm
- Needle bar stroke 30.7 mm
- Hook auto lubricating full rotary hook
Functions and utilization of the sewing machine with an automatic thread trimmer. JUKI Magazine(International) Vol.5
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DLN 5410 Needle Feed Only Industrial Lockstitch Sewing Machine, Servo Motor, Table, L/T Leg Stand, Not K Legs
 2503: Juki DLN 5410 Needle Feed Only Industrial Lockstitch Sewing Machine & PowerStand |
Our Price: $2,649.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The machine head has been redesigned to improve the performance of each component. Thanks to the machine's low-tension sewing capability and the adjustment function for the needle feed amount (±15%), uneven material feeding and puckering rarely occur, thus enhancing the machine's ability to respond to any change in the material to be sewn. The optimally balanced design of the machine head and the stronger frame structure significantly reduce machine vibration and noise while the machine is being operated.
- Single Needle Feed High Lift
- 30.7 mm Needle Bar Stroke
- Automatic Lubricating Full Rotary Hook
- Maximum 4.5mm Stitch Length
- Consistent Stitch Length
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- Single needle feed and high lift
- Ideal unit for end finishing and top stitching on jeans
- Strong, even feed with consistent stitch length
- Sewing speed maximum rated up to 4,000 stitches per minute
- Maimum 4.5mm stitch length
- 30.7 mm needle bar stroke
- Automatic lubricating full rotary hook
- Fully automatic lubrication
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki DLN-9010-7S Direct Drive Needle Feed Only Industrial Lockstitch Sewing Machine DLN9010-7S, AutoTack, NeedlePosition, ThreadTrim, FootLift, Stand
 |
Our Price: $3,999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Assembled Power Stand, Program Panel on Top of Machine, Built In Direct Drive DC Servo Motor, Metal Stand, Adjustable Height , Wood Top 48" W x 20" D
This is the Juki DLN-9010, a needle-feed type DDL-9000 Series sewing machine, that has been highly applauded as the top-of-the-line lockstitch machine with a thread trimmer. It has inherited the advanced features of the DDL-9000 Series, such as the direct-drive system, semi-long arm and elimination of the oil pan. In addition, it comes with a highly reliable needle feed mechanism. The needle feed mechanism responds to a wide range of applications such as the sewing of outerwear, runstitching of men’s shirts, etc. and the attaching of various parts to garment bodies.
Click here to view a movie of the Juki DLN-9010
More Juki DLN-9010 Features:
This is the Juki DLN-9010, a needle-feed type DDL-9000 Series sewing machine, that has been highly applauded as the top-of-the-line lockstitch machine with a thread trimmer. It has inherited the advanced features of the DDL-9000 Series, such as the direct-drive system, semi-long arm and elimination of the oil pan. In addition, it comes with a highly reliable needle feed mechanism. The needle feed mechanism responds to a wide range of applications such as the sewing of outerwear, runstitching of men’s shirts, etc. and the attaching of various parts to garment bodies.
Click here to view a movie of the Juki DLN-9010
More Juki DLN-9010 Features:
- The machine ensures accurate stitch pitches (stitch length) as well as preventing slippage of the upper cloth thanks to the needle-feed mechanism which offers excellent efficiency of feed.
-
The bottom feed's locus has been improved to match the needle feed motion, thus the machine produces beautiful seams without stitch gathering, even when it is used for sewing slippery and difficult-to-feed material or for handling a difficult process.
- The needle feed mechanism is a so-called "dry type", which does not require oiling. With this mechanism, a highly reliable machine structure, free from oil leakage troubles, has been achieved. The frame, which requires only a minute quantity of lubricating oil, is structured to eliminate oil leakage.
- The machine can be easily changed over from a needle feed machine to a bottom feed machine, through a simple adjustment and gauge replacement. It is a useful feature for those users who also want to use the machine simply as a regular bottom feed type machine in accordance with applications and processes.
-
A horizontal-type automatic thread trimmer mechanism ensures speedy and reliable thread trimming.
- The hinge has been moved 10cm behind the needle entry point to ensure the material won't be caught, thus contributing to upgraded workability.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- MODEL NAME : DLN-9010SS DLN-9010SH
- Application: For light- to medium-weight materials For heavy weight materials
- Max. sewing speed: 5,000rpm 4,000rpm
- Max. stitch length: 4.5mm*
- Needle bar stroke : 33mm
- Lift of the presser foot
By hand: 5.5mm, By knee: 15mm(max.), Auto: 10mm
- Needle (at the time of delivery): DB1(#11) #9 - #18
- For JE:134 (Nm90) Nm65
- Nm110 DB1(#21) #20 - #23
- For JE:134 (Nm130) Nm120
- Nm160
- Hook: Automatic-lubricating full-rotary hook
- Lubrication: Minute-quantity lubrication to needle bar and hook
- Lubricating oil: JUKI New Defrix Oil No.1(equivalent to ISO VG7)
- Distance from needle to machine arm: 300mm
- Size of bed :517mm178mm
- Bobbin thread winder: Built-in the machine head
- Micro-lifter screw :Provided as standard
- Machine head drive: Compact-sized AC servomotor that is directly connected to the main shaft (direct-drive system)
- Automatic reverse feed function: Provided as standard (built-in solenoid type)
- Power requirement/Power consumption: Single-phase 100
- 120V, 200
- 240V, 3-phase 200
- 240V / 650VA
- Total weight: 87kg
- *The maximum sewing speed is 4,000 rpm or less in cases where the maximum stitch length is 3.5 mm or more.
Functions and utilization of the sewing machine with an automatic thread trimmer. JUKI Magazine(International) Vol.5
Please review our Freight LTL shipping Policies
Juki DU1181N Walking Foot Top and Bottom Feed Sewing Machine, Power Stand, Servo Motor, Auto Oil, up to 15mm Foot Lift and 9mm Stitch Length, Mbobbins
 10513: Juki DU1181N Walking Foot Top Bottom Feed Sewing Machine & Power Stand Servo Motor |
Our Price: $1,599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
With its powerful top and bottom feed mechanism, the machine smoothly feeds a difficult-to-feed material or a multi-layered part of material without pitch errors, achieving consistent seam quality.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki Japan webpage on DU1181N
Instruction Manual for Juki DU1181N
Parts List for Juki DU1181N
Model name DU-1181N
Max. sewing speed 2,000sti/min
Max. stitch length 9mm
Presser foot By knee: 15mm
Alternating vertical
movement 2～5mm
Needle DP×17 (#21), #14
- #23
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Specifications:
Max. sewing speed 2,000 stitches per minute
Max. stitch length 9mm (forward/backward)
Needle bar stroke 36.5mm
Lift of the presser foot by hand 5.5mm
Lift of the presser foot by knee 15mm
Thread take-up Link type
Alternating vertical movement 2～5mm
Hook Horizontal-axis full-rotary double-capacity hook
Needle (at the time of delivery) DP×17 (#21) #14～#23＊
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Pitch changing method By dial
Knee-lifter mechanism Built on the machine head
Lubrication Automatic
Lubricating oil JUKI MACHINE OIL No.7 (equivalent to ISO VG7)
Distance from needle to machine arm 261mm
Bed size 477mm × 178mm
Weight of the machine head 31kg
Please review our Freight LTL shipping Policies
Juki DU1181N Walking Foot Top & Bottom Feed Sewing Machine Head Only, Auto Oil, Knee Lift, 15mm Foot Lift, 9mm Stitch Length, M Bobbin, No Stand/Motor
101368: Juki DU1181N Walking Foot Top & Bottom Feed Sewing Machine Head Only |
Our Price: $1,299.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
ETA within 30 Days! With its powerful top and bottom feed mechanism, the machine smoothly feeds a difficult-to-feed material or a multi-layered part of material without pitch errors, achieving consistent seam quality.
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15 mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil ammount in the face plate and hook is adjustable.
The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The machine acchieves low-vibrationa nd low-noise
The machine head is designed to achieve optimum balance, thereby reducing vibration and noise, The machine affords the operator a comfortable working environment.
Excellent operability
The stitch pitch can be adjusted tin both normal and reverse directions.
The height and inclination of the feed dog can be adjusted.
The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki Japan webpage on DU1181N
Instruction Manual for Juki DU1181N
Parts List for Juki DU1181N
Model name DU-1181N
Max. sewing speed 2,000sti/min
Max. stitch length 9mm
Presser foot By knee: 15mm
Alternating vertical
movement 2～5mm
Needle DP×17 (#21), #14
- #23
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Specifications:
Max. sewing speed 2,000 stitches per minute
Max. stitch length 9mm (forward/backward)
Needle bar stroke 36.5mm
Lift of the presser foot by hand 5.5mm
Lift of the presser foot by knee 15mm
Thread take-up Link type
Alternating vertical movement 2～5mm
Hook Horizontal-axis full-rotary double-capacity hook
Needle (at the time of delivery) DP×17 (#21) #14～#23＊
Thread #40 - #8, B33
- B92, Nm=90/3
- 30/3
Pitch changing method By dial
Knee-lifter mechanism Built on the machine head
Lubrication Automatic
Lubricating oil JUKI MACHINE OIL No.7 (equivalent to ISO VG7)
Distance from needle to machine arm 261mm
Bed size 477mm × 178mm
Weight of the machine head 31kg
Please review our Freight LTL shipping Policies
Juki J-150QVP (DDL-9000C-FMS+)12"Arm High Speed Digital Free Motion Drop Feed Sewing Machine, BuiltIn Direct Drive DC Motor&Control Box 2500SPM, Stand
81922: Juki DDL-9000C-FMS Full Digital Sewing Machine, Built In Motor, Control Box, Assembled Stand |
Our Price: $4,499.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
* Synchrony No Interest Financing, Equal Monthly Pay. Apply online. Synchrony Equal Monthly Pay Financing. GE Snychrony will advise you of your maximum amount of credit that you can use towards purchase. b>
Experience JUKI’s new high-speed free motion quilting and sewing machine with digital technology.
With a maximum sewing speed of 2,500spm, this quiet and durable machine allows you to finish your work even faster. In addition, the generous 12” wide throat space allows you finish big projects with comfort.
Like Next in Fashion Show on NETFLIX with Tan France and Alexa Chung at Click Here .
Experience JUKI’s new high-speed free motion quilting and sewing machine with digital technology.
With a maximum sewing speed of 2,500spm, this quiet and durable machine allows you to finish your work even faster. In addition, the generous 12” wide throat space allows you finish big projects with comfort.
Like Next in Fashion Show on NETFLIX with Tan France and Alexa Chung at Click Here .
- Large Work Surface: The generous 12” wide throat space allows you to finish big projects with ease.
- Custom Switches: Two easily accessible switches (A and B) can be assigned for operations, for example, needle up and down or raising the presser foot.
- Independent Bobbin Winder: The QVP’s bobbin winder operates with an independent motor. Full capacity L size bobbins filled with your favorite thread ready to complete your project.
- One-Touch Switching to Free Motion Mode: The machine is equipped with a button for switching between straight stitch mode and free motion mode.
- Micro-Lifter Function: By inputting a negative value for the presser foot pressure, fabric can be sewn with the presser foot floating at a height of 0 to 4mm. This helps when sewing thick seams and reduces uneven feeding when quilting.
- Digitally Controlled LCD Panel: Adjust settings, for example, stitch length, thread tension, presser foot pressure with the touch of a button. Settings can be confirmed and specified from this large panel.
- Bobbin Thread Counter: With the count changing by one for every 10 stitches sewn, the counter can be used as a guide for when to replace the bobbin thread.
- Four Feed Operation Types: From the operation panel, you can select the appropriate feed operation for the item being sewn: standard for normal fabric, front up for thin fabric or knits, rear up for thick fabrics, and box feed for quilting.
- Adjustable LED Light: using an easily accessible switch, the brightness can be adjusted to one of five levels.
- Easily Insert and Remove Thick Fabrics: When the presser foot is raised, the feed dog is automatically lowered. In addition, the presser foot can be raised to a height of up to 13.5mm allowing thick fabrics to easily be inserted and removed.
- Maintenance-Free: Fill oil tank through the filler opening at the front of the sewing machine to ensure that the hook is automatically lubricated.
JUKI has digitalized the drive mechanism of the sewing machine which determines the "seam" quality, JUKI launches the new "direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer" DDL-9000CF.This is the newest flagship lockstitch machine. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed focus only on the operation panel according to the material to be sewn.Thanks to the digitalization, Optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
This is the newest flagship, fully digital type direct-drive, high-speed, lockstitch machine with an automatic thread trimmer. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
• Application: medium-weight materials
• Lubrication: semi-dry
• Max. sewing speed: 5000 st / min
• Max. stitch length: 5 mm
• Lift of the presser foot: by hand: 5.5 mm, by knee: 15 mm, auto: (1st stage) 5.0 mm (0.1～8.5 mm), (2nd stage) 8.5 mm (8.5～13.5 mm)
• Standard needle: DBx1 - DBx5 (#11) #9 - #18 (Nm 65
- 110)
DDL-9000C is the world's first sewing machine which comes with a digital drive mechanism and facilitates data transfer through NFC technology. This model allows for numerical entry of key settings through the operation panel meaning many manual adjustments are no longer needed. For the DDL -9000CS (digital type) adjustment of the feed dog height, feed pitch and feed locus have been digitalized and are programmable. For the DDL-9000CF (full-digital type), adjustment not only of those mentioned above but also the presser foot pressure and needle thread tension have been digitalized. With this digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machine internal memory, or externally, and can be reproduced with ease. For sewing plants which produce diversified products using different materials this feature is quite helpful to achieve stable seam quality without time wasted on manual adjustments.
In today’s market many sewing plants have to handle dozens of kinds of materials. To get the best seams on any given product, maintenance experts and skilled operators must finely adjust sewing machines using tools such as a screwdriver or manual leavers and dials. Adjustment of all lockstitch machines in the plant requires an enormous amount of time and it is impossible to have the adjustment values perfectly reproduced across all machines.
DDL-9000C Series not only substantially reduces setup time but also reproduces adjustments exactly, meaning the machine is ideally suited to the material being sewn. In addition, once the best-suited settings are stored in memory they can be translated to other machines via USB or NFC connection.
Vertically and horizontally-driven digital feed mechanism
Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease in accordance to the material being sewn. Thanks to this digital feed mechanism thread trimming is carried out with the feed dog lowered which results in a stable remaining thread length. Also because the feed dog does not protrude above the throat plate when the sewing machine stops it avoids the material from being damaged by the feed dog.
Thread remaining on the material at the end of sewing as short as 3 mm
As well as the lowered feed dog, the groove cam system and the picker device are adopted to allow forcible release of the thread trimmer even if it locks, thereby securing the appropriate needle thread length and achieving stable length of thread remaining on the material.
Management, browsing and editing of data can be carried out via Android application
Data on sewing machine adjustments can be transferred to an Android tablet or phone via the Juki Smart App via NFC or micro USB. This allows all settings to be calibrate once and then replicated across all machines on one sewing line. The operation panel is also provided with a USB port for data storage, transfer and management; software updates can be carried out with ease using a USB thumb drive.
Custom functions can be programed to the hand switch
The functions programed to the hand switches can be set through the operation panel. Since the reverse-feed stitching lever is provided as standard additional functions that will be needed the most can be set. 20 different functions (needle-up/down correction sewing, reverse-feed correction sewing, 1-time reverse-feed stitching cancellation function, etc.) can all be allocated to the hand switch. Highly convenient operation is ensured when functions that are used the most are easily accessible.
Other Key Benefits for the DDL-9000C Include:
- Needle-thread active tension (full digital type)
- The presser foot pressure can be digitally controlled (full digital type)
- 4.3-inch large LCD touch panel (full digital type)
Computer-controlled Vertically and Horizontally-Driven Feed Mechanism
The world’s first feed mechanism which is driven both vertically and horizontally has been computerized. The feed mechanism changes its feed locus in accordance with the material. As a result, the optimum adjustments can be achieved only by setting data on the operation panel. Furthermore, the vertically-driven feed mechanism helps keep the length of the thread remaining on the material after thread trimming constant.
Remaining thread at the end of sewing reduced to 3mm
A both-blade driven rotary knife system is adopted. the knife intersects with the thread to trim it just beneath the needle entry point. Since the knife ensures constant length of needle thread, the length of thread remaining on the material after thread trimming is, unlike thread trimming with the thread tensed, also constant. The Juki DDL-9000CFMS inherits JUKI’s thread trimming technology to allow the thread trimmer to start up as soon as the pedal is depressed.
Sewing Machine management utilizing “IoT” (Internet of Things)
Data adjusted in a sample-making workshop etc. can be transferred without contact to the sewing machines in your factory using your tablet. (USB port is provided as standard)
Commitment to “seam quality”is poised to enter a new era with JUKI ’s next-generation sewing system.
The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.
Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly
suit the materials being sewn.
Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this sewing machine, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Exampl e : Needle-thread active tension demonstrates its effectiveness in the top stitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
Sewing specifications by garment or sewn product type
JUKI - DDL-9000C Lockstitch Machine
JUKI has launched its new direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer - the DDL-9000C. This is the newest flagship lockstitch machine from the world’s largest industrial sewing machine manufacturer. The machine has been digitalized to allow for easy adjustment of settings such as the feed mechanism, thread tension and the feed locus, all through the operation panel. Perfect parameters needed to achieve a high quality seams can be achieved digitally and key conditions do not need to be manually adjusted. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machines internal memory and can be reproduced with ease. For factories which produce diversified products using different materials, this feature is quite helpful to achieve stable seam quality in a time efficient manner.
Direct-drive, high-speed, sewing system with automatic thread trimmer
DDL-9000CSeries model comparison chart.
Click here to access the Juki warranty registration form
JUKI J-150QVP - Chapter 7: Free Motion Sewing including with Rulers
Tutorial: Sewing with an Industrial Juki DDL 9000 Sewing Machine by TomKat Stitchery
Extended US Warranty: 5 Years Mechanical, 2 Years Electrical, 90 Days Adjustments on defects in material or workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Video Playlist on Instruction for Juki J-150QVPCatalog Brochure for Juki J-150QVP
Instruction Manual for Juki J-150QVP
Sewing Speed: Max. 2,500 spm
Max. Stitch Length: 5mm
Needle: DBx1 #9-#18
Bobbin: "L" style
Working Area: 5.5” w x 12” h
Machine Weight: 26 kg (57lbs)
Main Table: 48” w x 22” h
Extension: 48” w x 20” h
Total Work Area: 48” x 42” h
Shank Type: High Shank
Compare Juki 9000C Machine Specifications below:
Application Medium-weight
Max. Sewing Speed 5,000 Stitches per Minute
Max. Stitch Length 5 mm
Needle Bar Stroke 30.7 mm
Lift of the Presser Foot - by Hand 5.5 mm
Lift of the Presser Foot - Auto 15 mm
Needle DBx1 (#11) #9 to #18 Capable
Feed Dog 4-row
Hook Automatic-Lubricating Full-Rotary Hook
Lubrication Automatic
Lubricating Oil Juki Machine Oil 7 (Equivalent to ISO VG7)
Control Box Integrated
Power Requirement Single-Phase 100
- 240V, 3-phase 200
- 240V
Power Consumption 520VA
Total Shipping Weight - Assembled 240 lbs
Juki DDL-9000C-F Safety Precautions
Juki DDL-9000C-F Instruction Manual
Juki DDL-9000C-F Parts List
-
Model: DDL-9000C-FMS
-
Type: Full Digital Type
-
Application: Medium-weight
-
Lubrication: Semi-dry
-
Max Sewing Speed: 5,000sti/min
-
Max Stitch Length: 5mm
-
Needle: DB×1・DB×5（#11） #9～#18（Nm65～110）
-
Lift of the presser foot:
-By hand: 5.5mm
-By knee: 15mm, Auto: 1st stage 5.0mm(※0.1～8.5mm), 2nd stage 8.5mm(※8.5mm～13.5mm) - ※Adjustable on the operation panel
Model Number Juki DDL-9000C-FMS
- Application Medium-Weight
- Lubrication Semi-Dry
- Lubricating Oil JUKI Machine Oil 7 (equivalent to ISO VG7)
- Max. Sewing Speed 5,000 sti/min
- Max. Stitch Length 5mm
- Needle Bar Stroke 30.7mm
- Feed Dog Height 0.8mm
- Needle DBX1 (#11)#9
- 18(NM65
- 110)
- Lift of the Presser foot By Hand: 5.5mm, By Knee: 15mm
- Auto: First Step 5.0mm (0.1
- 8.5mm)
- Second Step 8.5mm (8.5
- 13.5mm)
- Size of the Bed 517x178mm (distance from needto machine arm: 303mm)
- Bobbin Thread Winder Built-in the machine head
- Machine Head Drive Compact AC Servomotor (450W) that is directly connected to the main shaft (direct-drive system)
- Automatic reverse feed function Provided as Standard
- Power Consumption 520VA
- Net Weight Machine Head: 40kg / 40.5kg (with AK-154), Control Box: 6Kg
- Outside dimensions of package (mm) 712x313x767(0.171m3)
Juki Warranty Information
Table Height Adjustment: table height adjusts from 29 to 36 in without casters. If you put casters on it then your bottom range is 2 inches higher which makes it 31 to 38 inches. These are approximate. Maybe 1/2" in + or - variation.
Juki DDL-5550N High Speed Straight Stitch Sewing Machine, 11" Arm, Auto Oil, 5mm Stitch Length, 6/13mm Foot Lift, Table Stand, Servo Motor
 17199: Juki Japan DDL5550N High Speed Straight Lock Stitch Sewing Machine, Stand, Servo Motor |
Our Price: $799.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
-
Brand: Juki
-
Application: For light-medium weight materials
-
Bed Size: 517mm x 178mm
-
Feed Dog: 3-Row
-
Hook: Automatic-lubricating full-rotary hook
-
Max. Sewing Speed: 5500spm (motor 3450RPM)
-
Max. Stitch length: 5mm
-
Thread take-up: Slide Type
- Needle System (at time of delivery): DB x 1(#14)#9
- #18 For JE:134(Nm90)
-
Lubrication: Fully automatic lubrication system by means of plunger pump
-
Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
-
Lift of Presser Foot by Hand: 5.5 mm
-
Lift of Presser Foot by Knee: 13 mm
-
Weight of Machine Head: 75 LBS.
-
Thread Material: Polyester
- Made In: Japan
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Please click here for DDL-5550,DDL-5530 Instruction Manual (.pdf)Download PDF on Juki DDL5550N Series
Please review our Freight LTL shipping Policies
Juki LG-158-1 Single Needle 30" LongArm Walking Foot Needle Feef Sewing Machine +Power Stand LG158, 10mm SL, 7/8" Lift, Big M Bobbin, 100 DDx1 Needles
 2500: Juki LG-158-1 Single Needle 30" LongArm Walking Foot Industrial Sewing Machine & Power Stand |
Our Price: $13,499.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
With a generous 750 mm of free space under the arm and powerful unison-feed that provides a maximum stitch length of 10 mm, the machine delivers outstanding productivity when sewing heavy materials such as tents and sheets.
- Easy Reverse Sewing with Simple Operation
- Vertical Axis Large Hook with Big Bobbin
- Automatic Thread Safety Device
- Easy Feed Walking Foot
- Front End Bobbin Winder
- Works Great on Tents, Awnings, Leather, Canvas, and Vinyl
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Catalog for Juki LG-158-1 Single NeedleInstruction Manual for Juki LG-158-1 Single Needle
- 30" of free space under the arm
- 10mm stitch length
- Delivers uncomparable performance on heavy-weight materials such as tents, awnings, leather, canvas, and vinyl
- Front end bobbin winder enables the user to operate the machine much easier
- The presser foot goes up as high as 7/8" to ensure easy placement
- Unison feed mechanism insures smooth and speedy feed of materials through the machine
- Easy feed with walking foot
- Vertical axis large hook which reduces the bobbin thread replacement
- Automatic thread safety device which prevents damage
Model name LG-158-1 (1-needle)
Max. sewing speed 1,500sti/min*
Max. stitch length 10mm (normal/reverse feed)
Needle bar stroke 46.9mm
Needle gauge Standard 19.1mm (3/4") -
Lift of the presser foot By pedal: 21.5mm
Thread take-up Side type
Alternating vertical movement 6mm - 19mm
Hook Vertical-axis large hook
Needle (at the time of delivery) DD×1 (#25)
Thread #20 - #5, B69
- B138, Nm=40/3
- 20/3
Safety mechanism: Safety Clutch Provided as standard
Bobbin winder Built on the machine arm
Lubrication By an oiler
Lubricating oil JUKI New Oil No.1 (equivalent to ISO VG7)
Distance from needle to machine arm 750mm
Bed size 1,088mm×230mm
Weight of the machine head 108kg
*“sti/min” stands for “Stitches per Minute.”
When you place orders
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
See Google Videos on various models of Juki LG158
See You Tube Videos on various models of Juki LG158
Juki LG-158-2 Double Needle 30" LongArm Walking Foot Sewing Machine, Std. Gauge, Servo Motor & Stand, 10mm SL, 7/8" Lift, LG Bobbin, 100 214x1 Needles
 64079: Juki LG-158-2 Double Needle 30" LongArm Walking Foot Industrial Sewing Machine & Power Stand |
Our Price: $14,999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
With a generous 750mm of free space under the arm and powerful unison-feed that provides a maximum stitch length of 10mm, the machine delivers outstanding productivity when sewing heavy materials such as tents and sheets.
This JUKI LG-158 is a 30" Long Arm Sewing Machine with Compound Feed (Walking Foot), Jumbo Bobbins and a 1/2" Needle Gauge.
The machine is complete with unassembled table top, heavy duty stand and new 110 Volt SERVO Motor.
Most widely used for sewing larger panels of materials such as vinyl signs, awnings, tarps, insulation covers, and other large items.
This is a MADE IN JAPAN machine.
This JUKI LG-158 is a 30" Long Arm Sewing Machine with Compound Feed (Walking Foot), Jumbo Bobbins and a 1/2" Needle Gauge.
The machine is complete with unassembled table top, heavy duty stand and new 110 Volt SERVO Motor.
Most widely used for sewing larger panels of materials such as vinyl signs, awnings, tarps, insulation covers, and other large items.
This is a MADE IN JAPAN machine.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Long-arm, Unison-feed, Lockstitch Machine with Vertical-axis Large HookMAX SEWING SPEED: 1,500 SPM
MAX FOOT LIFT: 22mm (Almost a Full Inch)
Max. sewing speed 1,500sti/min
Max. stitch length 10mm
Presser foot By pedal: 21.5mm
Alternating vertical movement 6～19mm
Distance from needle to machine arm 750mm
Needle DD×1 (#25)
Thread #20～#5, B69～B138, Nm=40/3～20/3
Juki LH-3528AGF 1/4" 2-Needle, Double Needle Feed, Heavy Spec, Lockstitch Sewing Machine, Power Stand, Servo Motor, 5-12mm Presser Foot Lift, 0-4mm SL
 |
Our Price: $2,299.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up : Slide type
- Needle bar stroke : 33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle : DP5(#9)#9
- #14
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
- After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up :Slide type
- Needle bar stroke :33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle :DP5(#9)#9
- #14
- Organized split needle bar mechanism : Not provided
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- Distance from needle to machine arm : 245mm
- Bed size : 517mm x 178mm
- Weight of the machine head : 38kg
Please review our Freight LTL shipping Policies
Juki Warranty Information
Juki LS-1341 Cylinder Bed Walking Foot Needle Feed Lockstitch Sewing Machine, Large M B/C & Hook, 16mm Foot Lift, 6mmS.L, 160mm Wheel, Stand* 2000SPM
 5515: Juki LS 1341 Cylinder Bed Walking Foot Needle Feed Sewing Machine/Stand |
Our Price: $5,499.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
The slimmed-down throat plate easily adjusts to the sewing of small tubular articles with diameters as small as φ40mm. This enhances the machine's ability to smoothly sew not only bags and shoes, but also small article such as wallets. The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance.
- Includes Power Stand for USA: The Cylinder of machine bed sticks off the left hand side of the table giving it open or free arm type advantages.
- Cylinder-bed, single-needle, Unison-feed, Lockstitch Machine with a Vertical-axis Hook
- The LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves.
This makes the machine ideal for the sewing of tubular articles.
* With large vertical-axis hook
* The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed
* Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches
* The ratio of alternate vertical movement remains unchanged even when the material thickness changes
* Higher lift of the presser foot
* The maximum alternating vertical movement is 6.5mm
* Excellent operability and maintainability
* The underside of the top end of the cylinder-bed is provided with an easy-to-remove cover. This promises easy cleaning of thread wastes
* The stitch length can be easily selected by the stitch dial
* The machine's enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel(160mm)
* A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup
* The machine's full-open-type top design makes adjusting works easier
* The machine comes with a lubricating mechanism that uses a centralized oil wick
* This substantially reduces the time and trouble required for oiling the machine. (The hook needs manual oiling with an oiler)
* A walking foot mechanism is built into the machine arm to prevent oil from scattering
* Complete with table stand and motor
The underside of the top end of the cylinder-bed is provided with an easyto-
remove cover. This promises easy cleaning of thread wastes.
The stitch length can be easily selected by the stitch dial. The machine's
enhanced operability features include a clear view of the area around the
needle, placement of the bobbin thread winder on the front face of the
machine arm, and a large handwheel(160mm).
- Thread range: #50-#8, B33-B92, Nm_120/3-30/3
- Distance from needle to neck 255mm
- Cylinder Bed Diameter 72mm
- Motor Output 750W
- Machine Weight 37.5 Kg
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
With its larger needlebar stroke, larger lift of the presser foot, and newly adopted double-tension mechanism, the machine sews beautifully with thick threads (low count thread) and at higher thread tensions. This allows the machine to sew a broad range of heavy materials.The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance. In addition, the ratio between the alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes.
With this feature, the machine sews multi-layered parts of the material consistently and without stitch gathering.
The slimmed-down throat plate easily responds to the sewing of small tubular articles with diameters as small as 40mm.
This enhances the machine's ability to smoothly sew not only bags and shoes, but also small articles such as wallets.
Please review our Freight LTL shipping Policies
Juki Warranty Information
Juki LU1508 Head Only Walking Foot Needle Feed Upholstery Sewing Machine, Top Mbobbin, 16mm Foot Lift, 9mm Stitch Length, Safety Clutch, ETA Fall 2021
 Juki LU1508 Head Only Walking Foot Needle Feed Upholstery Sewing Machine, Top M Bobbin, 16mm Foot Lift, 9mm Stitch Length, Safety Clutch, 100 Needles |
Our Price: $2,499.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
N Stands for the Color: White
S Stands for Standary Heavy Duty
H Stands for Extra Heavy Duty 10-15% heavier duty than the Standard NS Version, with a longer needle and higher stroke.
S Stands for Standary Heavy Duty
H Stands for Extra Heavy Duty 10-15% heavier duty than the Standard NS Version, with a longer needle and higher stroke.
- Single Needle
- Compound Needle Feed And Walking Foot
- 2500 Stitches Per Minute
- New Rectangular Feed Prevents Gathering
- Handles Heavyweight Materials
- Industrial Sewing Machine
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for LU1508 specs included in Juki 1500 Series BrochureClick HERE for LU1508 Part List Manual
- New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
- Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
- Compared with elliptical feed, rectangular feed helps reduce gathered stitches
- With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
- Well tensed seams are consistently produced without pitch errors
- With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
- Stitch length can be easily selected by the stitch dial
- Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large handwheel
- Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
- Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
- Alternating vertical movement mechanism prevents irregular stitches
- High 16 mm presser foot lift enables easy material handling
- Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
- If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
- Pressing the reset button will immediately return the machine back to the normal state
- Maximum stitch length: 9 mm
- Needle bar stroke: 36 mm
- Alternating vertical movement: 2.5 mm - 6.5 mm
- Thread take-up: slide type
- Hook: Vertical-axis, double-capacity hook
- Needle: 135x17 Nm160
- Juki LU1508 Bobbin, Juki Part Number B9117-563-000, no generic available that we can find.
- Thread: #30
- #5, B46
- B138
- Weight: 93.7 lbs
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki LU1508NS Walking Foot Needle Feed Upholstery Sewing Machine, Power Stand
2524: Juki LU1508NS Walking Foot Needle Feed Upholstery Sewing Machine/Stand |
Our Price: $2,999.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
*FREE $30 Value! Organ Japan DPx17, 135x17 Box of 100 Needles for Portable or Industrial Power Stand Walking Foot Sewing Machines, Size 20 + for Upholstery. Uses #69 + Threads
N Stands for the Color: White
S Stands for Standard Heavy Duty
N Stands for the Color: White
S Stands for Standard Heavy Duty
- Single Needle
- Needle Feed And Walking Foot
- 2500 Stitches Per Minute
- New Rectangular Feed Prevents Gathering
- Includes Table, Stand, And Motor
- Handles Heavyweight Materials
- Industrial Sewing Machine
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for LU1508 specs included in Juki 1500 Series BrochureClick HERE for LU1508 Part List Manual
- New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
- Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
- Compared with elliptical feed, rectangular feed helps reduce gathered stitches
- With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
- Well tensed seams are consistently produced without pitch errors
- With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
- Stitch length can be easily selected by the stitch dial
- Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large handwheel
- Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
- Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
- Alternating vertical movement mechanism prevents irregular stitches
- High 16 mm presser foot lift enables easy material handling
- Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
- If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
- Pressing the reset button will immediately return the machine back to the normal state
- Maximum stitch length: 9 mm
- Needle bar stroke: 36 mm
- Alternating vertical movement: 2.5 mm - 6.5 mm
- Thread take-up: slide type
- Hook: Vertical-axis, double-capacity hook
- Needle: 135x17 Nm160
- Juki LU1508 Bobbin, Juki Part Number B9117-563-000, no generic available that we can find.
- Thread: #30
- #5, B46
- B138
- Weight: 93.7 lbs
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki LZ391N, 11" Arm, Dial or Knee Lever for Zigzag Width up to 12mm, Straight Stitch or ZZ, Free Motion Sewing Machine, Servo Motor Power Stand
 7504: Juki LZ-391N 11" Arm, Straight,Zigzag, Freemotion Sewing Machine, Stand |
Our Price: $3,299.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
*This is not a stock item. It is only available upon request upon which time it will be manufactured. Usually takes up to 90 days before shipping. Specify set up for embroidery only or zigzag with feed.
It will do both.
The machine is capable of embroidering names and marks on sewing products, as well as zigzag stitching, by simply changing the throat plate and setting zero stitch length. When using this machine for zigzag stitching, the zigzag width and stitch length can be changed so that many different types of zigzag stitch can be sewn.
Features:
It will do both.
The machine is capable of embroidering names and marks on sewing products, as well as zigzag stitching, by simply changing the throat plate and setting zero stitch length. When using this machine for zigzag stitching, the zigzag width and stitch length can be changed so that many different types of zigzag stitch can be sewn.
Features:
- The JUKI LZ-391N can be used in three different ways.
- When this machine is used as embroidering machine, the zigzag width as large as 12mm and the sewing speed is as high as 1,700 s.p.m. When used as a zigzag stitch machine, the zigzag width is as large as 10mm and the sewing speed is as high as 2,000 s.p.m.
- Furthermore, the JUKI LZ-391N can be used as a straight stitching machine capable of running at a speed of 2,000 s.p.m. by simply setting the zigzag width to 0.
- It can be easily converted to an embroidering machine by removing the feed dogs, which make a zigzag stitch machine or a straight stitching machine.
- To change from embroidering to zigzag stitching or vice-versa, all you need to do is install the throat plates included and exclusive for either function, and install/remove the needle plate and feed dog. This procedure can be carried out very easily.
- The zigzag width and stitch length can be easily
adjusted.
- The zigzag width is adjusted by raising/lowering the knee lifter using the knee. The stitch length is adjusted by moving the feed adjustment knob up/down by hand. This adjustment mechanism allows even the inexperienced operator to carry out adjustments without any difficulty and quickly,thereby enabling this machine to be used very easily.
- For fixed width zigzag use the settings on the face of the machine as explained on paragraph 4.3 on page 17 of Instruction Manual for Juki LZ391N.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki LZ391N CatalogueInstruction Manual for Juki LZ391N
Juki LZ391N You Tube Videos
- Applications Embroidering and zigzag stitching light-, `medium- and heavy weight materials
- Sewing Speed Max. 2,000 s.p.m. (for zigzag stitching with thezigzag width set at 10mm)
- Max. 1,700 s.p.m. (for embroidering with the zigzag width set at 12 mm)
- Thread take-up Link type, thread take-up
- Needle bar stroke 33.4 mm
- Needle DB X 1 #9 through # 16
- Stitch Length Max. 5mm
- Stitch length adjustment methods Moving the knob up/down
- Zigzag width 0 through 12 mm
- Zigzag width regulating method Using the knee lifter with the zigzag width pointer released. If you sew the product with
the zigzag width fixed to a certain value, the pointer should be fixed to that value.
- Lift of the presser foot Max. 8mm (with the presser foot lifting lever)
- Installing the attachments The distance from the needle entry to the center of the needle bar is 22.2 mm. The
attachments for an ordinary zigzag embroidering machine can be used with this machine.
- Hook DB type, full-rotary
- ( A hook using a patented lubricating method, and capable of using a thick thread
- Lubrication Method Centralized lubrication system (using and oiler)
- Material handling area on the machine 270 mm (from the needle entry to the bottom of the arm)
See Juki LZ-391N Videos on You Tube
Please review our Freight LTL shipping Policies
Model name LZ-271 Replaced by LZ-391N
Max. sewing speed 2,000sti/min (with zigzag width is set to 10mm)
1,700sti/min (with zigzag width is set to 12mm)
Needle bar stroke 33.4mm
Zigzag width 0～12mm
Stitch length - Max. 5mm
Needle DB×1B (#11) #9～#18 DB×1B (#14) #9～#16
Juki LZH-1290 1-Needle, Lockstitch, 8mm Zigzag Stitching Machine with Large Hook, Assembled Power Stand, Servo Motor
 33048: Juki LZH-1290 1-Needle, Lockstitch, Zigzag Stitching Machine, Power Stand |
Our Price: $4,699.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
- With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching.
- The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine.
- To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 14mm.
- By reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread.
- Ships assembled with power stand
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki LZH-12901-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.
- Max sewing speed: 2,000rpm
- Max stitch length: 6mm
- Zigzag width: Max. 8mm (adjustable to 10mm)
- Zigzag width adjustment method: by dial
- SY1906 (Nm100) Nm90～Nm110
- Needle bar stroke: 35mm
- Presser foot lift: 6mm by hand, 14mm by knee
- Thread take-up: Link type
- Hook: Horizontal-axis full-rotary double-capacity hook
- Needle: SY1906 (Nm100) Nm90～Nm110
- Thread: #50～#8, B33～B92, Nm=120/3～30/3
- Lubrication: By an oiler (hook: automatic)
- Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
- Distance from needle to machine arm: 295mm
- Bed size: 477mm x 178mm
- Weight of machine head: 35kg
Please review our Freight LTL shipping Policies
Juki LZH-1290-7 10mm Zigzag Machine, Auto Backtack, Thread Trim, Foot Lift, Needle Position, Lg Hook, M Bobbins, Assembled Stand, Servo Motor 2000SPM
 |
Our Price: $8,499.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Please allow 30-60 days before delivery
- The machine tenses thread uniformly over the zigzag stroke to produce beautifully finished stitches at a high speed. With its extended zigzag with, higher presser foot lift, and newly introduced horizontal-axis double-capacity hook, the machine upgrades the functions required for the sewing of heavy materials.
- With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching.
- The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine.
- To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 11mm.
- By reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread.
- Ships assembled with power stand
LZH-1290-7(with automatic thread trimmer) 1-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki LZH-12901-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.
- Max sewing speed: 2,000rpm
- Max stitch length: 6mm
- Zigzag width: Max. 8mm (adjustable to 10mm)
- Zigzag width adjustment method: by dial
- Needle bar stroke: 35mm
- Presser foot lift: 6mm by hand, 11mm by knee
- Thread take-up: Link type
- Hook: Horizontal-axis full-rotary double-capacity hook
- Needle: SY1906 (Nm100) Nm90～Nm110
- Thread: #50～#8, B33～B92, Nm=120/3～30/3
- Lubrication: By an oiler (hook: automatic)
- Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
- Distance from needle to machine arm: 295mm
- Bed size: 477mm x 178mm
- Weight of machine head: 35kg
Max. sewing speed 2,000sti/min
Max. stitch length 6mm
Presser foot By knee: 11mm
Zigzag width Max. 8mm (adjustable to 10mm)
Needle SY1906 (Nm100) Nm90～Nm110
Please review our Freight LTL shipping Policies
Juki MEB 3200J Trousers Keyhole Eyelet Buttonhole, Industrial Top Bottom Thread ChainStitch Sewing Machine, Panel, Stand, AutoCut, ThreadTrim FootLift
 |
Our Price: $19,995.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
Needle and looper thread tensions can be digitally established on the operation panel according to sewing conditions. Data can be registered on a pattern-by-pattern basis to easily reproduce the same sewing conditions.
- Using conventional machines, it's often quite difficult to reproduce the same sewing conditions. This machine does it with ease. With this capability, the MEB-3200 responds immediately to material changes, significantly reducing the time required for setup changes or adjustments. The machine
also ensures the consistent production of high-quality seams.
Thread tensions can be separately established for various sections of a buttonhole such as eyelet sections and
parallel sections.
- The machine promises high-quality seams by smoothly responding to changes in stitch formation and allowing the operator to set a separate thread tension for the bartacking sections of buttonholes.
- Thread tensions for the beginning and end of sewing can also be separately established. This helps prevent loose stitches or slip-off or raveling of thread at the beginning of sewing.
Threading work can be more easily.
- Since fewer parts need to be threaded, the machine can be threaded more quickly and easily than conventional buttonholing machines.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Juki MEB 3200 ManualEXCELLENT CAPABILITIES TO HELP IMPROVE SEAM QUALITY
Vertically driven cloth cutting knife controlled by a stepping motor.
- The knife is controlled by a stepping motor. This enables easy adjustment of the knife pressure on the operation panel to suit the material to be used, thereby preventing irregular cutting.
- Data on knife pressure can be registered on pattern-by-pattern basis to establish the best-suited knife pressure according to sewing specifications. Adequate knife pressure improves durability of cloth-cutting knife and knife guard.
- Selection between the cut-before knife and cut-after knife can be made on the operation panel.
- The stepping-motor-controlled cloth-cutting knife is free from the troubles likely to affect air-driven knives, including dull cutting and the breakage of parts such as the knife-driving arm. In addition, a large-capacity compressor is no longer required since the machine uses less compressed air.
Separately driven right and left work clamps.
- The right and left work clamps are separately driven by independent air cylinders. With this mechanism, the work clamps reliably clamp materials of different thicknesses to prevent the materials from flopping.
Download a Brouchure
Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Juki MEB 3200S Jacket Keyhole Eyelet Buttonhole, Industrial Top&Bottom Thread ChainStitch Sewing Machine, Stand, Panel, Auto Cut, ThreadTrim, FootLift
 |
Our Price: $19,995.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 4-6 weeks. Condition: New In Box |
Features
Needle and looper thread tensions can be digitally established on the operation panel according to sewing conditions. Data can be registered on a pattern-by-pattern basis to easily reproduce the same sewing conditions.
- Using conventional machines, it's often quite difficult to reproduce the same sewing conditions. This machine does it with ease. With this capability, the MEB-3200 responds immediately to material changes, significantly reducing the time required for setup changes or adjustments. The machine
also ensures the consistent production of high-quality seams.
Thread tensions can be separately established for various sections of a buttonhole such as eyelet sections and
parallel sections.
- The machine promises high-quality seams by smoothly responding to changes in stitch formation and allowing the operator to set a separate thread tension for the bartacking sections of buttonholes.
- Thread tensions for the beginning and end of sewing can also be separately established. This helps prevent loose stitches or slip-off or raveling of thread at the beginning of sewing.
Threading work can be more easily.
- Since fewer parts need to be threaded, the machine can be threaded more quickly and easily than conventional buttonholing machines.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
EXCELLENT CAPABILITIES TO HELP IMPROVE SEAM QUALITYVertically driven cloth cutting knife controlled by a stepping motor.
- The knife is controlled by a stepping motor. This enables easy adjustment of the knife pressure on the operation panel to suit the material to be used, thereby preventing irregular cutting.
- Data on knife pressure can be registered on pattern-by-pattern basis to establish the best-suited knife pressure according to sewing specifications. Adequate knife pressure improves durability of cloth-cutting knife and knife guard.
- Selection between the cut-before knife and cut-after knife can be made on the operation panel.
- The stepping-motor-controlled cloth-cutting knife is free from the troubles likely to affect air-driven knives, including dull cutting and the breakage of parts such as the knife-driving arm. In addition, a large-capacity compressor is no longer required since the machine uses less compressed air.
Separately driven right and left work clamps.
- The right and left work clamps are separately driven by independent air cylinders. With this mechanism, the work clamps reliably clamp materials of different thicknesses to prevent the materials from flopping.
Download a Brouchure
Thread Recommendations for Buttonhole, Button Sew and Bartack Machines
Juki PLC-2760 Double Needle Post-bed Walking Foot Unison Needle Feed Machine Lg Hook, Set Up Servo Power Stand, Requires Air Compressor for Foot Lift
 92750: Juki PLC-2760 2 Needle Post-bed Unison-feed Lockstitch Machine, Assembled Stand, Servo Motor |
Our Price: $8,999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
It is the most-advanced sewing machine which is best-suited to the sewing of heavy weight materials sewing processes such as car-seats, sofas and sports goods. The long distance from the machine arm to the needle contributes to improved workability.
The Juki PLC-2760 is the most-advanced post-bed lockstitch sewing machine and is best-suited to the sewing of heavy-weight materials sewing processes such as car-seats, sofas and sports goods.
This machine with a thread trimmer utilizes a basic performance which matches best to the sewing of heavy materials such as car seats and furniture. The vertical strokes of the presser foot and walking foot (amount of alternating vertical movement of the walking foot and presser foot) can be easily changed using the large dial mounted on the top of the machine head.
Stitch length can be changed over among different lengths:
The sewing machine with a thread trimmer is provided as standard with a 2-pitch dial. One unit of this sewing machine can sew different sewing lengths since the sewing length can be instantaneously changed over.
Reduction of noise and vibration:
Reduce weight by using resin parts for the surface of vibration point. Noise and vibration decrease by changing the gear of a hook into a bevel gear.
High-torque direct-drive motor is installed:
The sewing machine provided with a thread trimmer has adopted a high-torque direct-drive motor which is suitable for heavy-weight materials. Asa a result, the sewing machine is excellent at its responsiveness and ensures increased penetration into the material even when sewing multi-layered parts.
Higher lift of the presser bar:
A presser bar height of 20mm is achieved when using the automatic presser bar lifting lever. Thanks to this feature, the process of joining leather and heavy-weight sponges, which are usually used as materials for expensive sofas, can be carried out with ease.
Eccentricity of the feed driving cam is adjustable:
Adjustment of the eccentricity of the feed driving cam has been enabled. As a result, the sewing machine can perform sewing with feed that is best-suited to the material and thread used. It is no longer necessary to prepare other subclass model sewing machines.
The upper and lower feed ratio is adjustable:
The upper and lower feed ratio can be changed only by the adjustment of the lower feed amount without changing the upper feed amount, thereby preventing material slippage.
Juki PLC-2760 - YouTube
JUKI - PLC-2760 Optional LDA Post Bed Sewing Machine - YouTube
JUKI PLC-2760SCA Optional -7 Electronic Automation/SD for Sewing Car Seats with Smart Device
Click to start slides, shows Optional -7 Electronic Automation
Categories: HEAVY DUTY MACHINES, Upholstery, 2-Needle Lockstitch, Post-Bed, Heavy Duty, Bag Making, Car Trimmers, etc.
The Juki PLC-2760 is the most-advanced post-bed lockstitch sewing machine and is best-suited to the sewing of heavy-weight materials sewing processes such as car-seats, sofas and sports goods.
This machine with a thread trimmer utilizes a basic performance which matches best to the sewing of heavy materials such as car seats and furniture. The vertical strokes of the presser foot and walking foot (amount of alternating vertical movement of the walking foot and presser foot) can be easily changed using the large dial mounted on the top of the machine head.
Stitch length can be changed over among different lengths:
The sewing machine with a thread trimmer is provided as standard with a 2-pitch dial. One unit of this sewing machine can sew different sewing lengths since the sewing length can be instantaneously changed over.
Reduction of noise and vibration:
Reduce weight by using resin parts for the surface of vibration point. Noise and vibration decrease by changing the gear of a hook into a bevel gear.
High-torque direct-drive motor is installed:
The sewing machine provided with a thread trimmer has adopted a high-torque direct-drive motor which is suitable for heavy-weight materials. Asa a result, the sewing machine is excellent at its responsiveness and ensures increased penetration into the material even when sewing multi-layered parts.
Higher lift of the presser bar:
A presser bar height of 20mm is achieved when using the automatic presser bar lifting lever. Thanks to this feature, the process of joining leather and heavy-weight sponges, which are usually used as materials for expensive sofas, can be carried out with ease.
Eccentricity of the feed driving cam is adjustable:
Adjustment of the eccentricity of the feed driving cam has been enabled. As a result, the sewing machine can perform sewing with feed that is best-suited to the material and thread used. It is no longer necessary to prepare other subclass model sewing machines.
The upper and lower feed ratio is adjustable:
The upper and lower feed ratio can be changed only by the adjustment of the lower feed amount without changing the upper feed amount, thereby preventing material slippage.
Juki PLC-2760 - YouTube
JUKI - PLC-2760 Optional LDA Post Bed Sewing Machine - YouTube
JUKI PLC-2760SCA Optional -7 Electronic Automation/SD for Sewing Car Seats with Smart Device
Click to start slides, shows Optional -7 Electronic Automation
Categories: HEAVY DUTY MACHINES, Upholstery, 2-Needle Lockstitch, Post-Bed, Heavy Duty, Bag Making, Car Trimmers, etc.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
PLC-2700 Series Post-bed, Unison-feed, Lockstitch Machines with Vertical-axis Large HookModel name PLC-2710-7, 2710
PLC-2760-7, 2760 PLC-2760L PLC-2765
Max. sewing speed 2,500sti/min 2,000sti/min 2,500sti/min
Max. stitch length 12mm
Presser foot By hand:10mm, Auto:20mm By hand:10mm, Auto:18mm
Needle 135×17 (Nm140)
Nm100～Nm180 135×17 (Nm200)
Nm140～Nm200 135×17 (Nm140)
Nm100～Nm180
Thread #30～#5,
B46～B138,
Nm60/3～18/3 #8～#0 #30～#5,
B46～B138,
Nm60/3～18/3
Model Options:
Post-bed, 1-needle, Unison-feed, Lockstitch Machine
PLC-2710-7
PLC-2710
Post-bed, 2-needle, Unison-feed, Lockstitch Machine
PLC-2760-7
PLC-2760
PLC-2760L(thick-thread long-pitch type)
PLC-2765(with organized split needlebars)
Please review our Freight LTL Shipping Policies
Ships Ground Freight only.
Juki TSH-471U 16.5" Longarm Unison Walking Foot Needle Feed Sewing Machine, Servo Motor Stand, 800SPM, 11mm Stitch for Heavy Materials
 91826: Juki TSH-411U 16.5" Arm Bottom Feed 12/20mm Foot Lift Sewing Machine/Stand for Heavy Materials |
Our Price: $9,699.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Special Order 90 to 120 days Non-refundble
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
TSH-441U1-needIe, Semi-long Cylinder Bed, Lockstitch Machine
with a Large Shuttle-hook for Extra-heavy-weight Materials
Max. sewing speed 800sti/min
Max. stitch length 11mm
Presser foot By pedal: 20mm
Alternating vertical movement 4～8mm (TSC-441U, TSU-471U)
Distance from needle to machine arm 420mm
Needle 794 (Nm230) Nm130～Nm280
Thread #8～#0, B92～B207 Nm=30/3～15/3
Juki TSC-441U 16.5" Arm Walking Foot Needle Feed Sewing Machine Video
Juki TSC-441U 16.5" Longarm Unison Walking Foot and Needle Feed Sewing Machine, Servo Space Saver Stand, up to 800SPM, 11mm Stitch for Heavy Materials
91826: Juki TSH-411U 16.5" Arm Bottom Feed 12/20mm Foot Lift Sewing Machine/Stand for Heavy Materials |
Our Price: $9,499.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Special Order 90 to 120 days non-refundable/
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
The lifting range of the presser foot is as high as 20mm for smooth placement / removal of extra heavy-weight materials. The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
TSH-441U1-needIe, Semi-long Cylinder Bed, Lockstitch Machine
with a Large Shuttle-hook for Extra-heavy-weight Materials
Max. sewing speed 800sti/min
Max. stitch length 11mm
Presser foot By pedal: 20mm
Alternating vertical movement 4～8mm (TSC-441U, TSU-471U)
Distance from needle to machine arm 420mm
Needle 794 (Nm230) Nm130～Nm280
Thread #8～#0, B92～B207 Nm=30/3～15/3
Juki TSC-441U 16.5" Arm Walking Foot Needle Feed Sewing Machine Video
Juki TSC-461 Super Long Arm 37.5" Cylinder Bed Single Needle Feed Walking Foot Sewing Machine TSC461, 11mmSL, 20mmLift, & Pedestal Power Stand 650RPM
 31236: Juki TSC-461 Super Long Arm 37.5" Cylinder Bed Single Needle Feed Walking Foot Sewing Machine TSC461 |
Our Price: $19,999.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
This machine is capable of powerfully feeding the materials which cannot be smoothly fed by conventional machines.
It is equipped with a free space under the arm as wide as 950mm, which means that the machine is capable of sewing large materials, long-sized materials and tubular sewn products with ease.
The lift of the presser foot is high as 20mm.
The lifting amount of the presser foot is sufficient to sew extra heavy materials.
The machine is equipped with a built-in type bobbin winder which the operator can reach during sewing.
The machine comes with a large shuttle hook and large bobbin which have been exclusively designed for sewing extra heavy materials: these reduce the frequency of bobbin replacement. thereby leading to higher efficiency in sewing extra heavy materials using thick threads.
When compared with the conventional 45K bobbin, the amount of thread wound around the newly developed large bobbin is increased by 50%.
Applications: Carrying bags, transportation equipment. sporting goods.
It is equipped with a free space under the arm as wide as 950mm, which means that the machine is capable of sewing large materials, long-sized materials and tubular sewn products with ease.
The lift of the presser foot is high as 20mm.
The lifting amount of the presser foot is sufficient to sew extra heavy materials.
The machine is equipped with a built-in type bobbin winder which the operator can reach during sewing.
The machine comes with a large shuttle hook and large bobbin which have been exclusively designed for sewing extra heavy materials: these reduce the frequency of bobbin replacement. thereby leading to higher efficiency in sewing extra heavy materials using thick threads.
When compared with the conventional 45K bobbin, the amount of thread wound around the newly developed large bobbin is increased by 50%.
Applications: Carrying bags, transportation equipment. sporting goods.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Max. sewing speed: 650rpmMax. stitch length: 11mm (normal/reverse feed)
Needle bar stroke: 56mm
Lift of the presser foot: By hand: 12mm, By pedal: 20mm
Reverse feed stitching method: By lever
Thread take-up: Cam type thread take-up
Alternating vertical movement: 4 8mm
Hook: Large capacity shuttle hook
Needle (at the time of delivery): 794 (Nm230) Nm=130 Nm280
Thread #8 #0. 892 8277, Nm=30/3 8/3
Lubrication: By an oiler
Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO V37)
Bobbin winder: Built on the machine arm
Top-feed method: Interlocked with the bottom feed mechanism
Distance from needle to machine arm: 950mm
Click HERE for Juki Brochure on TSC-461
- Extra Heavy Duty 37 inch Long Cylinder- Bed
- Compound Needle Feed Walking Foot
- Stitching Machine for Leather, Webbing, Canvas,
- Filters and any Heavy Fabrics from about 1/16”
up to 7/8” thick with an adjustable stitch length lever
and reverse feed for back-tacking.
Juki Warranty Information
LH-3528AGF 1/4" Double Needle Feed Lockstitch Industrial Sewing Machine LH-3128, Fully Assembled Ready to Sew, 5-12mmLift 4mmS.L, PowerStand 3000SPM
|
Our Price: $2,299.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 6-8 weeks. Condition: New In Box |
Features
*Free $30 Organ 135x5 Needles Box of 100 - Interchangable with Singer 20u # 1901, 1955, SY1995, SY6790, and 134, 134R, 135X5, 135x7, DPX5 , DPx7, DPx134.
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off,
You only have to set up the thread stand. It ships from Atlanta
Fully Assembled Ready to Sew comes ready to plug in a wall. The machine is already mounted to pin hinges in the stand, belt tension adjusted, belt guard installed, and sewn off,
You only have to set up the thread stand. It ships from Atlanta
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up : Slide type
- Needle bar stroke : 33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle : DP5(#9)#9
- #14
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
- After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- MODEL NAME : LH-3528
- Feed system :Bottom-feed Needle-feed
- Application :For light-weight
- materials :For medium-weight
- materials :For jeans and
heavy-weight materials
- Max. sewing speed : 3,000rpm
- Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
- Thread take-up :Slide type
- Needle bar stroke :33.4mm
- Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
- Hook :Vertical-axis regular hook
- Needle :DP5(#9)#9
- #14
- Organized split needle bar mechanism : Not provided
- Lubrication : Fully automatic lubrication system by means of plunger pump
- Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
- Distance from needle to machine arm : 245mm
- Bed size : 517mm x 178mm
- Weight of the machine head : 38kg
Please review our Freight LTL shipping Policies
Reliable 3500SD Straight LockStitch Sewing Machine Drop Feed, Direct Drive Built In DC Servo Motor, 4500RPM, Stand
 Reliable 3500SD Direct Drive Single Needle Sewing Machine, Stand |
Our Price: $999.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Experience the advanced sewing technology of the 3500SD. The energy-saving direct drive technology eliminates the sewing belt and provides precise and adjustable speed control with automatic needle positioning, making sewing easier for beginners and experts alike. The 3500SD’s “drop feed” sewing mechanism is designed for a wide range of light to medium-weight fabrics.
A STITCH IN THE RIGHT DIRECTION
Introducing our newest addition to the sewing machine family - the Direct Drive 3500SD. This single-needle lockstitch machine is perfect for creating fundamental stitches. As the machine sews, the top and bottom threads interlock, ensuring that they stay securely in place within the fabric.
DIRECT-DRIVE MOTOR
The 3500SD features state-of-the-art direct drive motor technology that eliminates the need for a motor belt. No belt = less noise and a smoother, quieter operation.
ENERGY EFFICIENT
Direct drive motors only operate when the foot pedal is engaged, resulting in up to 70% less energy consumption compared to clutch motors.
A HALF STITCH AT A TIME
With a simple press of a button, the 3500SD allows for index (“step”) stitching. Perform a simple half stitch for precision stitch control.
DIGITAL SPEED CONTROL
Full control is at your fingertips. Adjust the speed of the motor right at your fingertip with the built-in control panel.
NEEDLE UP OR NEEDLE DOWN
The 3500SD is equipped with a cutting-edge programmable needle positioner featuring an integrated LED light, allowing you to control the needle's stopping position effortlessly – either up or down. This innovative addition eliminates the need to interrupt your work and manually turn the handwheel. Fast and efficient.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 3500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
A STITCH IN THE RIGHT DIRECTION
Introducing our newest addition to the sewing machine family - the Direct Drive 3500SD. This single-needle lockstitch machine is perfect for creating fundamental stitches. As the machine sews, the top and bottom threads interlock, ensuring that they stay securely in place within the fabric.
DIRECT-DRIVE MOTOR
The 3500SD features state-of-the-art direct drive motor technology that eliminates the need for a motor belt. No belt = less noise and a smoother, quieter operation.
ENERGY EFFICIENT
Direct drive motors only operate when the foot pedal is engaged, resulting in up to 70% less energy consumption compared to clutch motors.
A HALF STITCH AT A TIME
With a simple press of a button, the 3500SD allows for index (“step”) stitching. Perform a simple half stitch for precision stitch control.
DIGITAL SPEED CONTROL
Full control is at your fingertips. Adjust the speed of the motor right at your fingertip with the built-in control panel.
NEEDLE UP OR NEEDLE DOWN
The 3500SD is equipped with a cutting-edge programmable needle positioner featuring an integrated LED light, allowing you to control the needle's stopping position effortlessly – either up or down. This innovative addition eliminates the need to interrupt your work and manually turn the handwheel. Fast and efficient.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 3500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
MAXIMUM SEWING SPEED: 3700 RPMSTITCH LENGTH: 0 - 0.2” / 0-5 mm
NEEDLE BAR STROKE: 1.22” / 31 mm
NEEDLE SYSTEM #: 16 x 257/ #9-18
PRESSURE FOOT LIFT: By hand 0.2” / 5 mm; By knee 0.5” / 13 mm
BOBBIN WINDER: Yes
THREAD CUTTER: No
INDEX STITCHING: Yes
NEEDLE POSITIONER: Yes
STITCH DIAL REGULATOR: Yes
REVERSE LEVER: Yes
HOOK TYPE: Rotary
HEAD DIMENSIONS: 22” x 7” x 10” / 55.8 x 17.8 x 25.4 cm
SHIPPING DIMENSIONS: 48” x 40” x 50” / 121.9 x 101.6 x 127 cm
SHIPPING WEIGHT: 200 lbs / 90.71 kg
LUBRICATION: Automatic
COUNTRY OF ORIGIN: China
WARRANTY: Limited 1 year
Reliable 5500SD High Speed Straight Stitch Industrial Sewing Machine, Auto Trim, Back Tack, Control Panel, BuiltIn Direct Drive Servo Motor Stand, LED
 Reliable 5500SD Automatic Thread Trimmer Single Needle Lockstitch Sewing Machine w/ Direct Drive |
Our Price: $1,499.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
The 5500SD is designed to enhance productivity and flexibility. It features an automatic thread trimmer that consistently trims threads of different thicknesses. The machine also has a digital control panel that offers innovative capabilities, such as automatic backtacking, programmable stitch lengths, stitch limiting, and slow start. The 5500SD sewing machine is equipped with Direct Drive technology, eliminating the need for a belt and offering better speed control. It also positions the needle in the down or up position, saving time and making it easier for sewers to achieve professional results. This versatile machine can handle a wide range of light to medium-weight fabrics.
The Secret to Sewing Success? Automatic Thread Cutting!
Incorporate an automatic thread cutter and foot lift into your sewing, and you won't believe the results. This innovative feature streamlines the sewing process, saving both time and money for users. This accelerates production by reducing downtime and speeding up the final results. The automatic thread cutter ensures clean, uniform cuts, promoting the efficiency and professionalism of each sewing project.
THREAD TRIMMING AND AUTOMATIC FOOT LIFT
The automatic thread cutter makes removing your fabric so much faster and easier, saving you time and money. By simply pushing back on the foot pedal, the thread trimmer will engage and cut the thread. It’s that easy and that fast. You are now ready to sew your next piece.
DUAL DIRECT DRIVE MOTOR
The 5500SD uses dual motor technology, introducing the next generation in direct-drive motor performance. Traditional machines with under bed thread trimmer systems use 1 motor, direct drive or servo, for sewing, needle positioning, and thread trimming functions. Using not 1 but 2 motors, the 5500SD separates these functions for a much more efficient, quieter and smoother operation. The dual motor is key to increased efficiency, unmatched precision, and a more productive sewing experience.
A HALF STITCH AT A TIME
With a simple press of a button, the 5500SD allows for index stitching. Perform a simple stitch for precision stitch control.
PROGRAMMABLE SEWING
Full control is at your fingertips. The 5500SD is fully equipped with a variety of convenient features that are specifically designed to make your sewing experience much simpler and faster. Features like Digital Speed Control, Slow Start, Needle Positioner, Programmable Back Tacking, setting your stitch length and much much more…
NEEDLE UP OR NEEDLE DOWN
Are you tired of stopping your work to move the handwheel? The 5500SD includes a programmable needle positioner to stop the needle in the up or down position. This eliminates the need to pause your work and turn the handwheel.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 5500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
The Secret to Sewing Success? Automatic Thread Cutting!
Incorporate an automatic thread cutter and foot lift into your sewing, and you won't believe the results. This innovative feature streamlines the sewing process, saving both time and money for users. This accelerates production by reducing downtime and speeding up the final results. The automatic thread cutter ensures clean, uniform cuts, promoting the efficiency and professionalism of each sewing project.
THREAD TRIMMING AND AUTOMATIC FOOT LIFT
The automatic thread cutter makes removing your fabric so much faster and easier, saving you time and money. By simply pushing back on the foot pedal, the thread trimmer will engage and cut the thread. It’s that easy and that fast. You are now ready to sew your next piece.
DUAL DIRECT DRIVE MOTOR
The 5500SD uses dual motor technology, introducing the next generation in direct-drive motor performance. Traditional machines with under bed thread trimmer systems use 1 motor, direct drive or servo, for sewing, needle positioning, and thread trimming functions. Using not 1 but 2 motors, the 5500SD separates these functions for a much more efficient, quieter and smoother operation. The dual motor is key to increased efficiency, unmatched precision, and a more productive sewing experience.
A HALF STITCH AT A TIME
With a simple press of a button, the 5500SD allows for index stitching. Perform a simple stitch for precision stitch control.
PROGRAMMABLE SEWING
Full control is at your fingertips. The 5500SD is fully equipped with a variety of convenient features that are specifically designed to make your sewing experience much simpler and faster. Features like Digital Speed Control, Slow Start, Needle Positioner, Programmable Back Tacking, setting your stitch length and much much more…
NEEDLE UP OR NEEDLE DOWN
Are you tired of stopping your work to move the handwheel? The 5500SD includes a programmable needle positioner to stop the needle in the up or down position. This eliminates the need to pause your work and turn the handwheel.
UBERLIGHT™ FLEX LED LIGHT
The perfect add on light is included at no extra charge for the 5500SD making it both, a great sewing machine, and a great value.
SUPERIOR STAND
Others skimp on the stand components, we don’t. We use only 100% plywood in our tabletops (not cheap particle board) and our legs are made from heavy-duty 3/32" steel.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
MAXIMUM SEWING SPEED: 5000 RPMSTITCH LENGTH: 0 - 0.2”/0-5 mm
NEEDLE BAR STROKE: 1.22”/31 mm
NEEDLE SYSTEM #: 16 x 257/ #9-18
PRESSURE FOOT LIFT: By hand 0.2”/5mm, By knee 0.5”/13 mm
AUTOMATIC PRESSER FOOT LIFT: 0.35”/9 mm
BOBBIN WINDER: Yes
THREAD CUTTER: Yes
INDEX STITCHING: Yes
NEEDLE POSITIONER: Yes
STITCH DIAL REGULATOR: Yes
HOOK TYPE: Rotary
LUBRICATION: Automatic
HEAD DIMENSIONS: 23” x 7” x 10”/58.4 x 17.8 x 25.4 cm
SHIPPING DIMENSIONS: 48” x 40” x 50”/121.9 x 101.6 x 127 cm
SHIPPING WEIGHT: 190 lbs/86.18 kg
COUNTRY OF ORIGIN: China
WARRANTY: Limited 1 year
Rex 516M2-55RB 3 Thread Overlock, 2 Thread Safety Chain Stitch, 5 Thread Serger*
 |
Our Price: $999.00 Prices are subject to change, and only current prices will be honored. Availability: Please contact us for availability. Condition: RB Refurbished |
Features
- Model 757KD-516M2-35
- Number of Needles 2
- Number of Threads 5
- Needle Gauge 5
`Overedge Width 5/10mm
- Differential Feed Ratio 0.7-2
- Stitch Length 3.6mm
- Lift of Presser Foot 6mm
- Max. Sewing Speed 7,500 SPM
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Rex REX8500 Single Needle Lockstitch Industrial High Speed Sewing Machine RX8500, Assembled Power Stand, 5500RPM, Auto Oil - FREE 100 16x231 Needles
 |
Our Price: $499.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
- High speed
- Smooth running
- Non-vibrating
- Self-lubricating
- up to 5500 SPM
- Major parts made in Japan & Taiwan
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Superior SO55 SewLube Sewing Machine Oil 55 Gallon Drum Barrel, for Juki and Industrial Sew Reservoir Pans, to Refill Tubes, Quarts, Gallon Containers
 |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Availability: Please contact us for availability. Condition: New In Box |
Features
Clear Mineral Oil Based Stainless Non Detergent Oil for Industrial Sewing Machines and Serger Oiler Refill, also Auto Oil Bath Lubrication Reservoirs in Oil Pan Under the Machine Head.
- Dyno Lily White (ISO-22) low viscosity crystal clear oil is a highly refined consistent viscosity and non-detergent mineral oil.
- Ideal for sewing and extile machinery and parts. Specially formulated for use in high speed sewing machines.
- Colorless and stainless, Dyno Lily White oil inhibits rust and controls oxidation
- Excellent for use in applications where the oil may come into contact with the fabric.
Ships by Ground or ocean transport only. Considered Hazardous to ship by air.
SEW - LUBE OIL, Lily White Machine Oil #SO, Made in U.S.A.
Low viscosity, water white lubricating oil for sewing machines, textile machinery and parts. Excellent for use in applications where oil may come in contact with fabrics.
Contains: Hydrotreated Paraffinic Oil (CAS No. 72623-86-0)
Caution: Consult Material Safety Data Sheet (MSDS) prior to use. Use in strict accordance with all information contained on MSDS.
Hazard Rating: Health - O (Insignificant) Fire - 1 (Slight), Reactivity 0, (Insignificant)
For Chemical Emergency: Spill, Leak, Fire Exposute or Accident - Call CHEMTREC - Day or Night 1 800-424-9300 or 202-483-7616.
Dyno Chemicals and Lubricants
Non-US Warranty: 30 days parts and labor.
Specifications
How To Add Oil To An Industrial Sewing MachineUsing the Reliable 3300SD single-needle sewing machine with direct drive, our technical manager here at Reliable will show you how to oil your industrial sewing machine and ensure it stays properly lubricated.
Yamata FS1341 10" Cylinder Arm Walking Foot Needle Feed Sewing Machine Head Only, 9/16mm Foot Lift, Knee Lever, M Bobbins, 135x17 Needles
 |
Our Price: $2,704.41 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
The FY1341 offers a consistent stitching pitch and outstanding ability to sew sharp curves. This makes the machine ideal for the sewing of tubular articles. Sewing capabilities and feed performance that respond to a broad range of uses in the sewing of heavy materials.
Speed, Max (S.P.M.): 2000*
Clearance Under Foot: by hand 9mm - by knee 16mm
Needle Bar Stroke: (36mm)
Stitch Length, Max.: (6mm)
Needle: 135 x 17 and 135 x 16 leather
Thread: Size 33 - 138
Hook: Vertical-axis 1.6 fold-capacity hook
Locus of feed: Rectangular
Knee lift: Built in on head
Bobbin winder: Built in on head
Cylinder size: 72mm
Distance from needle to machine arm: 255mm
Speed, Max (S.P.M.): 2000*
Clearance Under Foot: by hand 9mm - by knee 16mm
Needle Bar Stroke: (36mm)
Stitch Length, Max.: (6mm)
Needle: 135 x 17 and 135 x 16 leather
Thread: Size 33 - 138
Hook: Vertical-axis 1.6 fold-capacity hook
Locus of feed: Rectangular
Knee lift: Built in on head
Bobbin winder: Built in on head
Cylinder size: 72mm
Distance from needle to machine arm: 255mm
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
With its larger needlebar stroke, larger lift of the presser foot, and newly adopted double-tension mechanism, the machine sews beautifully with thick threads (low count thread) and at higher thread tensions. This allows the machine to sew a broad range of heavy materials.The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance. In addition, the ratio between the alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes.
With this feature, the machine sews multi-layered parts of the material consistently and without stitch gathering.
The slimmed-down throat plate easily responds to the sewing of small tubular articles with diameters as small as 40mm.
This enhances the machine's ability to smoothly sew not only bags and shoes, but also small articles such as wallets.
Please review our Freight LTL shipping Policies
Yamata FY LU1508NH Walking Foot Needle Feed Upholstery Machine for Leather Vinyl Canvas, Power Stand, Servo Motor
 Yamata FY1508NH Single Needle Walking Foot Lockstitch Machine, Power Stand, Servo Motor |
Our Price: $2,435.71 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Single needle walking foot lockstitch machine with large vertical hook for heavy weight materials. The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering.
Max speed: 2000 SPM
Max stitch length: 10mm
Needle bar stroke: 38mm
Max presser foot by knee: 16mm
Max presser foot by hand: 9mm
Working space: 255mm
Max speed: 2000 SPM
Max stitch length: 10mm
Needle bar stroke: 38mm
Max presser foot by knee: 16mm
Max presser foot by hand: 9mm
Working space: 255mm
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Yamata 1508NHDescription:
High-Quality & Economical Prices
The 1508NH is very much like a Juki 1508NH with some improvements such as; Adjustable Climbing Device and Adjustable Take-Up Guide for thread loop timing
Applications:
- The preferred style walking foot machine with all the features of expensive European Style machines At an Economical Price
- Standard presser feet & needles and Big Bobbins
Features:
Built in Knee Lifter
Built in Bobbin Winder
Safety Clutch Reset Button
Drop in Large Bobbin
Rectangular Feed Motion
Semi automatic Lubrication System
Large vertical Automatically Oiled Hook
High Needle Bar Stroke
190R Needle System
High Presser Foot Lift
Quick Release Knee Presser Pedal
Easy Dial-Adjustable stitch regulator
Reverse
Built-In Synchronizer Hub
Adjustable Climbing Device
Large Hand Wheel
This is a complete unit with New Table Stand with Adjustable K-Legs and a 3/4 HP. FESM 550 3/4 H.P. Servo Motor 110V.
Videos on LU1508 Type Machines
Yamata FY1510 Single Needle Walking Foot Lockstitch Machine
|
Our Price: $2,350.84 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
Single needle walking foot lockstitch machine with large vertical hook for heavy weight materials. The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering.
Max speed: 2000 SPM
Max stitch length: 10mm
Needle bar stroke: 38mm
Max presser foot by knee: 16mm
Max presser foot by hand: 9mm
Working space: 255mm
Max speed: 2000 SPM
Max stitch length: 10mm
Needle bar stroke: 38mm
Max presser foot by knee: 16mm
Max presser foot by hand: 9mm
Working space: 255mm
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Yamata FY8700 High Speed Straight LockStitch Sewing Machine, Knocked Down Unassembled Power Stand +100 Bonus Needles!
 4031: Yamata FY8500 (GC8500) High Speed Straight Stitch Sewing Machine/Stand |
Our Price: $849.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 11" Arm Space
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 5500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee
- Maximum 5mm Stitch Length
- Minimum 6 Stitches Per Inch
- Includes Table, Stand, And 1/2hp Motor
- Industrial Sewing Machine
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- 5500 stitches per minute
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 p.s. i.
- Needles: 9-18 DBX1
- The machine is applicable for different materials,
- Advanced noise-decreasing device
Please review our Freight LTL shipping Policies
Yamata FY8700 High Speed Straight LockStitch Sewing Machine Head Only
4031: Yamata FY8500 (GC8500) High Speed Straight Stitch Sewing Machine/Stand |
Our Price: $429.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- 11" Arm Space
- Single Needle Lockstitch
- Uses Organ DBx1 Needles same as 16x231
- Up To 5500 Stitches Per Minute
- Fully Automatic Lubrication
- 1/2 Inch Foot Lift By Knee
- Maximum 5mm Stitch Length
- Minimum 6 Stitches Per Inch
- Industrial Sewing Machine
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- 5500 stitches per minute
- Single-needle
- Lockstitch
- Maximum foot lift: 13 mm
- Maximum stitch length: 5 mm
- Maximum stitches: 6 p.s. i.
- Needles: 9-18 DBX1
- The machine is applicable for different materials,
- Advanced noise-decreasing device
Please review our Freight LTL shipping Policies
Yamata FY9300 High Speed Straight Stitch Sewing Machine Assembled Stand, Direct Drive Motor, Auto Undertrimmer, Needle Up/Down, Reverse, Stitch Length
 84431: Yamata FY9300 High Speed Straight Stitch Sewing Machine, Stand, 110V Motor |
Our Price: $1,079.56 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
High Speed Straight Stitch Direct Drive single needle machine.
Built In Motor, Stand, Under-trimmer, Needle Up/Down, Reverse, Stitch Length
Thread Trimmer / Needle Up/Down / Presser Foot Lift and Reverse Controls on Screen
Built In Motor on back of machine with wiring.
Applications:
For sewing light to heavy-weight materials including cottons, knits, polyester, nylon, sheer fabrics and denim
Suitable for stitching such products as blouses, shirts, men's, ladies and children's apparel, uniforms, overalls, lingerie, etc.
Heavyweight fabrics such as jeans can be sewn by changing the needle plate, feed dog, foot, stitch regulator, hook and needle bar
Built In Motor, Stand, Under-trimmer, Needle Up/Down, Reverse, Stitch Length
Thread Trimmer / Needle Up/Down / Presser Foot Lift and Reverse Controls on Screen
Built In Motor on back of machine with wiring.
Applications:
For sewing light to heavy-weight materials including cottons, knits, polyester, nylon, sheer fabrics and denim
Suitable for stitching such products as blouses, shirts, men's, ladies and children's apparel, uniforms, overalls, lingerie, etc.
Heavyweight fabrics such as jeans can be sewn by changing the needle plate, feed dog, foot, stitch regulator, hook and needle bar
Extended US Warranty: 5 Years Mechanical, 90 Days Service Labor on defects in material and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
✅High Speed Straight Stitch Direct Drive single needle machine. Built In Motor, Stand, Under-trimmer, Needle Up/Down, Reverse, Stitch Length✅Thread Trimmer / Needle Up/Down / Presser Foot Lift and Reverse Controls on Screen Built In Motor on back of machine with wiring.
✅Built In Motor on back of machine with wiring.Fingerguard in Operation
✅or sewing light to heavy-weight materials including cottons, knits, polyester, nylon, sheer fabrics and denim Suitable for stitching such products as blouses, shirts, men's, ladies and children's apparel, uniforms, overalls, lingerie, etc. Heavyweight fabrics such as jeans can be sewn by changing the needle plate, feed dog, foot, stitch regulator, hook and needle bar
✅This listing is for a complete unit with TABLE
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.