 |
December 3, 2024 |
Scan N Cut, Silhouette Cameo, Embosser and Artistic Edge Digital Electronic Craft, Vinyl and Fabric Cutters
Issue Description Heat transfer materials are experiencing issues with staying in place on the fabric surface. The material is either not sticking well on initially or coming off with limited wear and tear.
Cause: The following can cause concerns with heat transfer material not adhering properly onto a fabric surface: Fabric type in question is not conducive to adhesive - The heat transfer material is intended for cotton fabric surfaces. It will not work with Nylon fabrics or plastics (vinyl/PVC, ABS, etc.). Similarly, polyester will not work well with heat transfer materials since the adhesive type cannot bond properly to a plastic-based surface. Also, textured fabrics or loosely knit fabrics are not ideal for use with the heat transfer product. Wrong iron settings used - Too little or too much heat as well as too little or too much time can affect the adhesive quality and how it is bonded onto the fabric surface. Over or under ironing can cause issues. Washing or drying conditions too harsh - Garments should be turned inside-out prior to washing and fabrics with the heat transfer material applied should not be placed in a dryer with a high heat setting.
Resolution:
Some of the suggestions and tips for proper use of heat transfer material are as follows:
Do not apply heat transfer material to Nylon fabrics or plastics (vinyl/PVC, ABS, etc.). Heat transfer material should never be layered. For best results, apply ample pressure while using your iron's cotton setting. Keep things as flat as possible when ironing on initially Use a thin pressing cloth (or the Teflon sheet included in the box) rather than a thick cloth. Heat transfer material should never be dried on high heat in a dryer-only medium or low. Highly textured fabrics or loosely knit fabrics are not ideal for use with heat transfer material. Once your project is finished and the transfer surface has been removed leaving your project, you may wish to again iron (directly for flocked and with a thin pressing cloth for smooth) without the additional plastic surface in order to provide additional heated pressure. After wearing (if a garment of any sort), you will want to wash the garment inside-out.
Click Here To View the New Brother ScanNCut Accessories Brochure for 2020
Brother CACORKGE Cork Fabric for ScanNCut, Geometric Pattern
 Brother CACORKGE Cork Fabric for ScanNCut, Geometric Pattern |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Step it up a notch with Brother printed cork fabric! With six different patterns and three coordinates in the product line, you can mix and match to create your own personalized projects.
Non-US Warranty: 30 days parts and labor.
Specifications
- One sheet of 12” x 24” cork material
- Perfect for small fabric projects
- Create appliques and small projects like earrings, clutches, buttonhole embellishments and pockets.
Floriani Quilters Select CraftNCut Software Bundle for Fabric/Vinyl Digital Cutting Machines, 200 Hope Yoder Designs, AppliStick, Perfection Tape, DVD
 65429: Floriani Quilters Select Craft N Cut Software Bundle |
Our Price: $479.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
The Perfect Software Match for your Fabric & Vinyl Cutting Machines! Software comes with Educational training videos by Hope Yoder and over 200 of her Exclusive Designs!
The select software to take you directly from the box to crafting your own special designs with the fabric & vinyl cutting machine you already own!
Save in: WAF, PES, SEW, EMD, JEF, HUS, DST, CSD, XXX, EXP, SHV, VIP, AND VP3
Export as artwork in: SVG, FCM, DXF, PLT. It will also export image files in the following formats: png, bmp, jpg, gif.
In addition to its suite of editing tools for artwork & appliqué, ONLY Craft N Cut™ has the feature Save 2 Cut, which calculates the settings your machine needs for your chosen design and material! Cut out the guesswork and unleash your creative possibilities!
Perfect for ScanNCut Owners:
• Full-featured artwork Tools for creating designs!
• Vector artwork editing Tools to modify designs!
• Embroidery applique tool for creating applique stitches!
• Embroidery run stitch tool to create run stitches!
• Word play tool to fill shapes with words!
• Save artwork to export to your cutting machine!
• FREE artwork & applique designs Included!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
The Perfect Software Match for your Fabric & Vinyl Cutting Machines! Software comes with Educational training videos by Hope Yoder and over 200 of her Exclusive Designs!
The select software to take you directly from the box to crafting your own special designs with the fabric & vinyl cutting machine you already own!
Save in: WAF, PES, SEW, EMD, JEF, HUS, DST, CSD, XXX, EXP, SHV, VIP, AND VP3
Export as artwork in: SVG, FCM, DXF, PLT. It will also export image files in the following formats: png, bmp, jpg, gif.
In addition to its suite of editing tools for artwork & appliqué, ONLY Craft N Cut™ has the feature Save 2 Cut, which calculates the settings your machine needs for your chosen design and material! Cut out the guesswork and unleash your creative possibilities!
Perfect for ScanNCut Owners:
• Full-featured artwork Tools for creating designs!
• Vector artwork editing Tools to modify designs!
• Embroidery applique tool for creating applique stitches!
• Embroidery run stitch tool to create run stitches!
• Word play tool to fill shapes with words!
• Save artwork to export to your cutting machine!
• FREE artwork & applique designs Included!
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
This introductory offer of the software also includes:- Over 200 exclusive Craft N Cut™ designs by Hope Yoder
- Educational DVD featuring Hope Yoder, with training videos on the software AND ready-made projects
- Quilters Select Appli-Stick, the perfect stabilizer for the appliqué process
- RNK’s Embroidery Perfection Tape, as recommended on the Educational DVD
Quilters Select, a sister division of Floriani, has introduced the select software known as Craft N Cut, and Kathi Quinn has an introductory new video on it! Take the fear out of your digital cutter with RNK’s 1st crafting software. Learn how to bring up a mat, add artwork and use Save 2 Cut; no more fear, just perfect cutting. Cut out the guess work by watching Kathi
Craft-N-Cut Knockout and Registration Marks Features. In this video I will show you how simple it is to create Knockout designs in Craft-N-Cut software using the automated Knockout tool. Then I will show you how to use the Layered Vinyl Registration Mark tool to create registration marks automatically for your layered vinyl design.
Whats-New-From-Quilters-Select/Craft-N-Cut
** Windows® Operating System Required**
Floriani Quilters Select Design N Quilt Software Bundle from Alex Anderson, Reduced $200*
 Floriani Quilters Select Design N Quilt Software Bundle from Alex Anderson |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Quilt the way you LOVE to!
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Designing and planning made EASY -
From libraries of blocks, fabrics, and even Alex Anderson quilts, to quick and simple artwork editing tools that eliminates the tedium of repetition.
Take your idea > Create Block > Create Quilt Layout
Now you know what to cut BEFORE you cut -
Fabric previewing tools and auto tools for seam allowance lets you print your own templates with correct yardage estimates!
Design N Quilt turns your quilt patter into easy quilting templates, even create the files for your long arm robotics!
• Foundation Piecing
• Rotary Cutting Instructions
• Actual Size Templates
• Embroidery Quilting
• Long Arm Quilting
Magic Needle Tool: Pull shapes from clip art to use in applique, just click to auto trace a backdrop image!
Repetitive Sets Tool: Quickly repeat shapes in row and columns! Flip or rotate as you wish!
Libraries at your fingertips
Block Library-
Built-in block library stacked with pre-made blocks! Browse by category to quickly find what you need! Create, save and expand your block library with endless easy to create possibilities!
Fabric Library-
See your finished quilt with actual fabric BEFORE you sew! Add YOUR fabrics to your library with a photo or other image file! Audition different fabrics with your design to see what works best! Create jpgs to show friends and get additional opinions!
Quilt Library-
You just quickly created your own digital quilt! Save it in your very own personal quilt library DNQ keeps your projects organized and easy to find!
Design N Quilt makes designing a snap
Easy Block Creator-
With DNQ anyone can find the fun in creating new quilt blocks! Our Easy Block Creator tool is so easy and intuitive that blocks can be made in the moments! Starts with an empty grid of squares or triangles and then select and unite the pieces of your quilt. Design any block you have ever seen or can imagine!
Advanced Block Creator-
No boundaries or restrictions! Create any quilt block you can sew! Create with curved lines! Or non-traditional quilt shapes! Let your inner artist loose with this easy-to-use tool!
New quilt layouts made easy-
Audition colors or fabrics in the quilt! Add sashing with vertical or horizontal strips! Or choose to have corner blocks in the sashing! Add one or more borders with horizontal or vertical strips! Add a block-based border to put your most interesting block designs or parade!
Add applique to your quilts-
Design N Quilt lets you easily add applique shapes to any quilt project. Create your very own Flower Pop! Let DNQ add the seam allowance - it includes them in the clear and easy printable templates and yardage estimates.
Custom shapes for perfect appliques on quilts
Create perfect applique on quilt using the Custom Shape Library!
Attach from our galleries of shapes to a block or quilt, and the pieces will be included with the printed page! You can turn these shapes into automatic embroidery with one click.
• Alphabets!
• Basic Shapes!
Print & piece a quilt just like Alex
Easily pick what you need to print!
The software offers many options to your printing previews, letting you know not just cut measurements, increments, and block previews, but other guided information like piece analysis and fabric summaries! It gives you the options of what you need to quilt the way you like!
Color Numbered Block Templates with Piece Analysis!
Actual size templates with outlines!
Print out templates for applique at actual sizes, with options for outlines, grid lines or color numbering!
Fabric Summaries and Cutting Instructions!
Automatically tells you how much fabric you will need to make your block or quilt, with exact instructions for rotary cutting for each piece!
Foundation Paper Piecing!
Piecing like Alex does it with a fully automatic one click tool! With a viewer window where you can see the block created one piece at a time. Create your own blocks and then let the software assign the paper piecing numbers and sections automatically. The tool also allows you to take control and assign the numbers and section yourself! Use the print preview to access professional quality templates for foundation paper piecing!
Quilt Tools = Quick Quilts
Export Quilt Tool
Make SVG cutting files of your quilt pieces with Export Quilt tool. Just what digital cutting machines need to start your project!
Create Artwork Tool
Draw endless shapes to use as applique in your quilts! If you have a photo image, like a .JPG, trace over it to create your own custom artwork!
Magic Needle Tool
Just click to auto trace shapes in a backdrop image. Work best with clipart, tracing the shapes of solid colors. Perfect for applique or creating your own quilt pattern for your long arm robotics!
Edit & Shaping Tools
Use the art edit tools such as "Weld and Trim" to make changes! Easy for creating applique that is trimmed so no layer overlap! You can make edits to your applique shapes so they are exactly what you need. Use the shape tool to access the points along the outline of the shape and then add, delete or move points to perfect your applique.
Align and Distribute
Organize your cuts! When making a template these tools organize your patterns! No rules here- layout your patterns however you like, but fans of even spaces and balance will be VERY happy.
Repetitive Sets Tool
Repetition doesn't mean tedium! Use to take one specific shape and quickly repeat it rows or in columns! Mix it up by alternating every other shape, either flipped or rotated!
Flip and Rotate Tools
Is the orientation of your quilt blocks no quite right? Or are you just wanting to give an old quilt design a new twist? Quickly Flip or Rotate quilt blocks to change it up!
Create Outline Tool
You can select a shape and the software will trace one or more outlines.
You kind of quilting!
Supports many styles of Quilting
Design N Quilt doesn't force you to quilt "The DNQ way." You are going to cut and sew with the techniques you choose. DNQ software just makes the designing and planning easy. So, no matter which quilting techniques define you, DNQ lets you:
• Buy your supplies with confidence
• Cut your materials with confidence, and
• Spend more time quilting the way you already love.
You Choose the Sea, Allowance
Do you use a 1/4" or 1/2"? Or something else? Design N Quilt has you covered. You set the seam allowance for your project so your printed templates have your correct yardage estimates.
The Power of Design N Quilt takes you further!
Long Arm Quilting with Design N Quilt
Design N Quilt is the perfect companion to all forms of quilting, INCLUDING Long Arm robotics. Open, save, and edit long arm quit designs for all brands of automated long arm quilting machines. Create new designs or make edits to the ones you have! Choose from the included decorative motif patterns to make long arm quilt designs with unlimited possibilities.
Embroidery Quilting - Easy and Powerful
Design N Quilt cab open and save plus create and edit embroidery designs. If you like to add touches of embroidery to your quilts, then you have everything you need in your new Design N Quilt software. Think of the cute quilt labels that you can add to help your family know more about your cherished quilts for years to come! Design N Quilt makes it easy to add embroidery text and personalize your quilt block or labels. There is also a full selection of the latest texture embroidery quilting stitches and super dynamic types or embroidery quilting like shape echo. While these tools may not be needed for your traditional quilting it is still nice to know your new quilt software is embroidery capable just in case you need it.
Embroidery Tools for Blocks and Borders!
Quilting Stitches!
Design your own in the hoop embroidery blocks that feature effects like decorative quilt. Create embroidery with special quilting stitches that are perfect for making in the hoop embroidery designs that quilt as you go. Choose from different patterns or use a shape echo effect!
Open and save all popular embroidery formats. One click tool to add a basting stitch around the design.
Create Embroidery Text!
Easy to use with dozens of beautiful letter styles to choose from! Arrange your text in an arch! In an envelope! Have fun with it!
One Click Embroidery Applique!
Turn any shape into applique - give it a blanket edge for hand made look or, a satin border for a beautiful finished look!
Designs!
Embellishments for Quilt Block made on your Embroidery Machine!
Embroidery Frames!
Make your own custom Quilt Labels!
Just a few clicks to be a Fabric Designer!
So simple anyone can do it! Just open an image file of anything and then let the Design N Quilt wizard help you design the coolest pattern you have ever seen in just a few clicks!
Design N Quilt is so fast and easy to use, whole families can participate in designing quilts for generations to enjoy. No experience necessary!
Sneak Peek Design N Quilt
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
Designing and planning made EASY -
From libraries of blocks, fabrics, and even Alex Anderson quilts, to quick and simple artwork editing tools that eliminates the tedium of repetition.
Take your idea > Create Block > Create Quilt Layout
Now you know what to cut BEFORE you cut -
Fabric previewing tools and auto tools for seam allowance lets you print your own templates with correct yardage estimates!
Design N Quilt turns your quilt patter into easy quilting templates, even create the files for your long arm robotics!
• Foundation Piecing
• Rotary Cutting Instructions
• Actual Size Templates
• Embroidery Quilting
• Long Arm Quilting
Magic Needle Tool: Pull shapes from clip art to use in applique, just click to auto trace a backdrop image!
Repetitive Sets Tool: Quickly repeat shapes in row and columns! Flip or rotate as you wish!
Libraries at your fingertips
Block Library-
Built-in block library stacked with pre-made blocks! Browse by category to quickly find what you need! Create, save and expand your block library with endless easy to create possibilities!
Fabric Library-
See your finished quilt with actual fabric BEFORE you sew! Add YOUR fabrics to your library with a photo or other image file! Audition different fabrics with your design to see what works best! Create jpgs to show friends and get additional opinions!
Quilt Library-
You just quickly created your own digital quilt! Save it in your very own personal quilt library DNQ keeps your projects organized and easy to find!
Design N Quilt makes designing a snap
Easy Block Creator-
With DNQ anyone can find the fun in creating new quilt blocks! Our Easy Block Creator tool is so easy and intuitive that blocks can be made in the moments! Starts with an empty grid of squares or triangles and then select and unite the pieces of your quilt. Design any block you have ever seen or can imagine!
Advanced Block Creator-
No boundaries or restrictions! Create any quilt block you can sew! Create with curved lines! Or non-traditional quilt shapes! Let your inner artist loose with this easy-to-use tool!
New quilt layouts made easy-
Audition colors or fabrics in the quilt! Add sashing with vertical or horizontal strips! Or choose to have corner blocks in the sashing! Add one or more borders with horizontal or vertical strips! Add a block-based border to put your most interesting block designs or parade!
Add applique to your quilts-
Design N Quilt lets you easily add applique shapes to any quilt project. Create your very own Flower Pop! Let DNQ add the seam allowance - it includes them in the clear and easy printable templates and yardage estimates.
Custom shapes for perfect appliques on quilts
Create perfect applique on quilt using the Custom Shape Library!
Attach from our galleries of shapes to a block or quilt, and the pieces will be included with the printed page! You can turn these shapes into automatic embroidery with one click.
• Alphabets!
• Basic Shapes!
Print & piece a quilt just like Alex
Easily pick what you need to print!
The software offers many options to your printing previews, letting you know not just cut measurements, increments, and block previews, but other guided information like piece analysis and fabric summaries! It gives you the options of what you need to quilt the way you like!
Color Numbered Block Templates with Piece Analysis!
Actual size templates with outlines!
Print out templates for applique at actual sizes, with options for outlines, grid lines or color numbering!
Fabric Summaries and Cutting Instructions!
Automatically tells you how much fabric you will need to make your block or quilt, with exact instructions for rotary cutting for each piece!
Foundation Paper Piecing!
Piecing like Alex does it with a fully automatic one click tool! With a viewer window where you can see the block created one piece at a time. Create your own blocks and then let the software assign the paper piecing numbers and sections automatically. The tool also allows you to take control and assign the numbers and section yourself! Use the print preview to access professional quality templates for foundation paper piecing!
Quilt Tools = Quick Quilts
Export Quilt Tool
Make SVG cutting files of your quilt pieces with Export Quilt tool. Just what digital cutting machines need to start your project!
Create Artwork Tool
Draw endless shapes to use as applique in your quilts! If you have a photo image, like a .JPG, trace over it to create your own custom artwork!
Magic Needle Tool
Just click to auto trace shapes in a backdrop image. Work best with clipart, tracing the shapes of solid colors. Perfect for applique or creating your own quilt pattern for your long arm robotics!
Edit & Shaping Tools
Use the art edit tools such as "Weld and Trim" to make changes! Easy for creating applique that is trimmed so no layer overlap! You can make edits to your applique shapes so they are exactly what you need. Use the shape tool to access the points along the outline of the shape and then add, delete or move points to perfect your applique.
Align and Distribute
Organize your cuts! When making a template these tools organize your patterns! No rules here- layout your patterns however you like, but fans of even spaces and balance will be VERY happy.
Repetitive Sets Tool
Repetition doesn't mean tedium! Use to take one specific shape and quickly repeat it rows or in columns! Mix it up by alternating every other shape, either flipped or rotated!
Flip and Rotate Tools
Is the orientation of your quilt blocks no quite right? Or are you just wanting to give an old quilt design a new twist? Quickly Flip or Rotate quilt blocks to change it up!
Create Outline Tool
You can select a shape and the software will trace one or more outlines.
You kind of quilting!
Supports many styles of Quilting
Design N Quilt doesn't force you to quilt "The DNQ way." You are going to cut and sew with the techniques you choose. DNQ software just makes the designing and planning easy. So, no matter which quilting techniques define you, DNQ lets you:
• Buy your supplies with confidence
• Cut your materials with confidence, and
• Spend more time quilting the way you already love.
You Choose the Sea, Allowance
Do you use a 1/4" or 1/2"? Or something else? Design N Quilt has you covered. You set the seam allowance for your project so your printed templates have your correct yardage estimates.
The Power of Design N Quilt takes you further!
Long Arm Quilting with Design N Quilt
Design N Quilt is the perfect companion to all forms of quilting, INCLUDING Long Arm robotics. Open, save, and edit long arm quit designs for all brands of automated long arm quilting machines. Create new designs or make edits to the ones you have! Choose from the included decorative motif patterns to make long arm quilt designs with unlimited possibilities.
Embroidery Quilting - Easy and Powerful
Design N Quilt cab open and save plus create and edit embroidery designs. If you like to add touches of embroidery to your quilts, then you have everything you need in your new Design N Quilt software. Think of the cute quilt labels that you can add to help your family know more about your cherished quilts for years to come! Design N Quilt makes it easy to add embroidery text and personalize your quilt block or labels. There is also a full selection of the latest texture embroidery quilting stitches and super dynamic types or embroidery quilting like shape echo. While these tools may not be needed for your traditional quilting it is still nice to know your new quilt software is embroidery capable just in case you need it.
Embroidery Tools for Blocks and Borders!
Quilting Stitches!
Design your own in the hoop embroidery blocks that feature effects like decorative quilt. Create embroidery with special quilting stitches that are perfect for making in the hoop embroidery designs that quilt as you go. Choose from different patterns or use a shape echo effect!
Open and save all popular embroidery formats. One click tool to add a basting stitch around the design.
Create Embroidery Text!
Easy to use with dozens of beautiful letter styles to choose from! Arrange your text in an arch! In an envelope! Have fun with it!
One Click Embroidery Applique!
Turn any shape into applique - give it a blanket edge for hand made look or, a satin border for a beautiful finished look!
Designs!
Embellishments for Quilt Block made on your Embroidery Machine!
Embroidery Frames!
Make your own custom Quilt Labels!
Just a few clicks to be a Fabric Designer!
So simple anyone can do it! Just open an image file of anything and then let the Design N Quilt wizard help you design the coolest pattern you have ever seen in just a few clicks!
Design N Quilt is so fast and easy to use, whole families can participate in designing quilts for generations to enjoy. No experience necessary!
Sneak Peek Design N Quilt
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Recommended System Requirements:- Genuine Intel Pentium IV, 2GHz PC computer (or higher)
- 1024x768 video resolution with a 16-bit color display (or higher)
- 1 gigabyte of RAM
- Microsoft® Windows® 8 and up operating systems
- Minimum 1 gigabyte hard disk space available
- Mouse
- Requires 64 BIT processor
Urban Elementz UEA1204 Tapestry Set - Applique
 |
Our Price: $82.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 25.75x26in.
HPN Demo CP912 120V Hot Pink Craft Market Heat Press, 9x12in Platen, Compact 35Lb, Over Center Pressure Adjust, for HTV Heat Transfer Vinyl, T-shirts
 82909: HPN Demo CP912 120V Hot Pink Craft Heat Press, 9x12" Platen, 35Lb, HTV Vinyl |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: Floor Model |
Features
The Craft Press is a great home heat press for any entry level business or home hobbyist. It’s ideal for a crafting Business. The Craft Press is 9"x12". This makes it the perfect size for pressing your shirts, pillow cases, towels, and much more. Together, the two are light and small enough to be portable for craft shows or to keep your work area clean. The Craft Press is also the perfect press to travel to craft shows, tradeshows, or game day set ups for on the spot personalization. • Platen size is 9"x12" • Press features over the center pressure adjustment • Digital time & temperature read out • 90 Day warranty • UL/ULC/CE/RoHS Approved • CE/NRTLCO Approved
- Great heat press for crafters, hobbyists, and home-based entrepreneurs
- 9" x 12" platen
- Lightweight—only 35 lbs.
- Press features Over-the-Center Pressure Adjustment for even, edge-to-edge heat and pressure
- Digital time and temperature readout
- Non-stick Teflon coated heating platen
- UL/ULC/CE/RoHS Approved
- CE/NRTLCO Approved
- 120V AC/6.5A
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Craft Press Model CP912-120 Operator’s ManualSpecifications:
- Platen Size: 9" x 12"
- Power: 120V/6.5A
- Actual Weight: 35lbs.
- Shipping Weight: 37lbs.
- Shipping Dimensions: 19.5” x 15.5” x 14.5”
- Actual Dimensions: 12.75” x 17.25” x 12.5” Closed
How to Decorate T-Shirts with a Heat Press. Four must-haves for decorating T-Shirts. Videos
How to Decorate Caps with a Heat Press. Learn what you’ll need to start heat printing caps. Videos
How to Decorate Uniforms with a Heat Press. Personalize all types of sports jerseys. Videos
How to Decorate Bags with a Heat Press. Here’s what you’ll need to start heat printing bags. Videos
Heat Press Transfer Vinyl Tutorial. Josh Ellsworth http://www.joshellsworth.com demonstrates the process of using heat transfer vinyl. From cutting to weeding to heating, this video will demonstrate the process for you.
Brother ScanNCut CATFM01 Iron On Sheets 8.5x11 Vinyl Film Cutting Materials , 4 Colors for Scan N Cut CM650, CM550, CM350, CM250, CM100
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Assorted Colors, each 8.5"x11", 4 pieces. Includes 1 sheet of clip art! For Embellishing tote bags, hats, T-shirts, and home décor items has never been easier with these iron-on transfer sheets.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CATG03 Iron-on Sheets of 8.5x11" Glitter Holiday Vinyl Cutting Materials, 4 Colors for ScanNCut CM650
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Holiday Colors: Assorted, each 8.5"x11", 4 pieces. Includes 1 sheet of clip art! Simply place the sheet onto a ScanNCut Standard Mat, cut out a design with the ScanNCut machine, and iron onto fabric.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CATG02 Iron-on Sheets 8.5x11in Glitter Brights Vinyl Cutting Materials in 4 Colors for ScanNCut CM650
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Basic Colors: Assorted, each 8.5"x11", 4 pieces. Includes 1 sheet of clip art! Simply place the sheet onto a ScanNCut Standard Mat, cut out a design with the ScanNCut machine, and iron onto fabric.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CATG01 Iron On Sheets 8.5x11 Glitter Basics Vinyl Cutting Materials 4 Colors ScanNCut CM650 500 250 100
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Basic Colors: Assorted, each 8.5"x11", 4 pieces. Includes 1 sheet of clip art! Simply place the sheet onto a ScanNCut Standard Mat, cut out a design with the ScanNCut machine, and iron onto fabric.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother ScanNCut CATSP02 Iron On Cutting Materials 8.5x11" Vinyl Film & Flock for ScanNCut CM650, CM500, CM350, CM250, CM100
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
- Contains 2 sheets Film, 2 sheets Flocked (each sheet 8.5"x11", 4 pieces)
- Includes 1 sheet of clip art!
- Embellishing tote bags, hats, T-shirts, and home décor items has never been easier with these iron-on transfer sheets. Simply place the sheet onto a ScanNCut Standard Mat, cut out a design with the ScanNCut machine, and iron onto fabric.
- For best results, please refer to the detailed instructions included with this package.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CATSP01 Iron On Vinyl Cutting Materials 8.5x11 Glitter Hologram for ScanNCut CM650 500 250 100
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Embellishing tote bags, hats, T-shirts, and home décor items has never been easier with these iron-on transfer sheets. Includes 2 sheets Glitter, 2 sheets Holographic (each sheet 8.5"x11"), and 1 sheet of clip art.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CATOTEB ScanNCut Trolley Rolling Tote Travel Bag Carrying Case 21x11x18" Blue, for all CM Models, Snug Fit for DX, SDX125, SDX225 or SDX230
 54450: Brother CATOTEB ScanNCut Trolley Bag Travel Carry Case 21x11x18" Blue |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: Floor Model |
Features
Durable polyester fabric, 2 large inside zip pockets for storage, 2 inside slide pockets that will accommodate all mat sizes, Removable ScanNCut machine carrier, and more. Dims: 21" x 11" x 18"
Brother Scan N Cut Tote Bag Blue CATOTEB is designed specifically to fit the ScanNCut machine, mats, and, accessories!
Features of the Brother Scan N Cut Tote Bag Blue CATOTEB
Durable polyester fabric, 2 large inside zip pockets for storage, 2 inside slide pockets that will accommodate all mat sizes, Removable ScanNCut machine carrier, and more.
Dimensions of the Brother Scan N Cut Tote Bag Blue CATOTEB: 21" x 11" x 18"
Non-US Warranty: 30 days parts and labor.
Specifications
Brother ScanNCut Rolling ToteTote your ScanNCut in sturdy style. The perfect size for your favorite die-cutting machine and all its accessories, this bag is durable, bold and great for toting your ScanNCut to a friend's house or scrapbooking crop.
What You Get
Rolling tote
Manufacturer's 90-day limited warranty
Good to Know
For use with your Brother ScanNCut Machine (sold separately).
Project Ideas and Instructions for Brother ScanNCut (.PDF)
Brother ScanNCut CATH01 Iron-on Sheets 8.5x11" Holographic Vinyl Cutting Materials, 4 Colors for Scan N Cut CM650 550 500 250 100
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
- Assorted Colors, each 8.5"x11", 4 pieces
- Includes 1 sheet of clip art!
- Embellishing tote bags, hats, T-shirts, and home décor items has never been easier with these iron-on transfer sheets. Simply place the sheet onto a ScanNCut Standard Mat, cut out a design with the ScanNCut machine, and iron onto fabric.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CATFL01 Iron On Transfer Holographic Vinyl Cutting Materials, Sheets of 8.5x11in Flocked, 4 Colors for ScanNCut CM650 500 250 100
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Assorted Colors, each 8.5"x11", 4 pieces. Includes 1 sheet of clip art! Embellishing tote bags, hats, T-shirts, home décor items and more with an assortment of colors and textures has never been easier with these iron-on transfer sheets. Free clip art included!
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CARS10B 800 Black Rhinestones 10SS Refill ScanNCut CM650 550 250 100
 |
Our Price: $5.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Hot Fix Rhinestones: 800 pieces. For use with the Brother ScanNCut Rhinestone Starter Kit.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CARS10R 800 Red Rhinestones 10SS Refill ScanNCut CM650 550 250 100
 |
Our Price: $5.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Hot Fix Rhinestones: 800 pieces. For use with the Brother ScanNCut Rhinestone Starter Kit.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CARS10C 800 Clear Hot Fix Rhinestones 10SS Refill for ScanNCut
 54469: Brother CARS10C 800 Clear Hot Fix Rhinestones 10SS Refill for ScanNCut |
Our Price: $5.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Hot Fix Rhinestones: 800 pieces. For use with the Brother ScanNCut Rhinestone Starter Kit.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Urban Elementz UEA1174S Toyz 4 Boyz Set - Applique
 |
Our Price: $38.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectSet of Four Approximate Finished Size: 9.5in to 6.75in.
Urban Elementz UE1148 Petal Power - Spring
 |
Our Price: $44.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate finished size: 27" x 16.5"
Urban Elementz UEA1180 Daisy Dotz Colorworks Panel Applique
 |
Our Price: $42.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 6.75x31.5in.
Urban Elementz UEA1206 Good Tidings Dotz - Applique
 |
Our Price: $38.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 16.25x20.75in.
Urban Elementz UEA1192 Origami Fish Dotz Purple- Applique
 |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 16" x 6.75".
Urban Elementz UE1176 Petal Power - Winter
 |
Our Price: $48.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate finished size: 27" x 16.5"
Urban Elementz UE0710 Butterfly Bliss - Set
 |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 5in to 8in.
Urban Elementz UE0786 Train - Retro Dotz - Boys
 |
Our Price: $6.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectAPPROX. FINISHED SIZE: 6.5 inch x 4.5 inch
Urban Elementz UEA1207 Good Tidings Batik - Applique
 |
Our Price: $38.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 16.25x20.75in.
Urban Elementz UEA1209S Origami Fish Dotz Set-Applique
 |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectSet of Three Approximate Finished Size: 16" x 6.75".
Urban Elementz UEA1202 Stag Pink - Applique
 |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 14" x 16.5".
Urban Elementz UEA1184 Dresden Dotz Large - Applique
 |
Our Price: $33.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 20.25" x 20.25".
Urban Elementz UEA1183 Dresden Dotz Medium - Applique
|
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 16.5" x 16.5".
The Stitch TV Show AK101 No Regerts Pre-Fused Applique Kit
 |
Our Price: $18.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
This pre-fused, laser-cut applique kit can be used for any quilt project to show that you have No Regrets ( or Regerts) about your quilting skills!
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process.Urban Elementz UEA1205 Welcome Home Dotz - Applique
 |
Our Price: $35.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 13.75" x 29.75".
Urban Elementz UEA1190 Mandala Dotz Orange - Applique
 |
Our Price: $14.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 14" x 14".
Urban Elementz UEA1189 Mandala Dotz Turquoise - Applique
 |
Our Price: $14.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 14" x 14".
Urban Elementz UEA1188 Mandala Dotz Purple - Applique
 |
Our Price: $14.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 14" x 14".
Urban Elementz UEA1182 Dresden Dotz Small - Applique
|
Our Price: $16.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size: 12.75" x 12.75".
Urban Elementz UEA1203 Tapestry Block Applique
 |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectApproximate Finished Size 13inx13.5in.
Urban Elementz UE1021 Bohemian Chic - Hearts - Neutral
 |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectSet of 25 - assorted sizes - 7.5in to 3.5in.
Urban Elementz UE1019 Bohemian Chic - Daises - Neutral
 |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectSet of 6 - assorted sizes: 2.5" to 4".
Urban Elementz UE1098 Sweet Treats - Cupcake Panel
 |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project10.25in to 10in.
Urban Elementz UE1101 Yee-Haw - Orange
 |
Our Price: $6.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project5.5" to 6.5".
Urban Elementz UE0766 Spotted Owl - Dotz #7
 |
Our Price: $10.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project5.5x7.5in.
Urban Elementz UE0886 Daisy Dotz - Pink - Small
 |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 12" block.
Urban Elementz UE0973 Growing Up - Two
 |
Our Price: $7.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project5.5x5in.
Brother CAFTKIT1 Foil Transfer Starter Kit for Scan N Cut Machines and Free Workspace Canvas Software
 Brother CAFTKIT1 Foil Kit for New Scan N Cut SDX225 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Make shiny foil patterns for greeting cards, gifts, and party decorations! Add a touch of elegance to most paper craft projects with silver and gold colored foils with the 50 foiling patterns included on the activation card. Plus, you can use your own designs or any built-in Brother cutting machine designs for a wide variety of foil creations.
Kit Includes:
• Glue pen holder
• Glue pen 1.3 ml (0.04 fl oz)
• Pressing tool
• Foil transfer sheets 3.9'' x 7.8'' (100mm x 200mm), 1 gold color
and 1 silver color
• Protective sheet 8.6'' x 12'' (220mm x 305mm)
• Dust removal sheet with storage sheet 1.9'' x 2.9'' (50mm x 75mm)
• 1 activation card to unlock function in CanvasWorkspace
• For use with Brother cutting machines.
• A free CanvasWorkspace (formerly ScanNCutCanvas) account and internet connection is necessary for activating the card.
Kit Includes:
• Glue pen holder
• Glue pen 1.3 ml (0.04 fl oz)
• Pressing tool
• Foil transfer sheets 3.9'' x 7.8'' (100mm x 200mm), 1 gold color
and 1 silver color
• Protective sheet 8.6'' x 12'' (220mm x 305mm)
• Dust removal sheet with storage sheet 1.9'' x 2.9'' (50mm x 75mm)
• 1 activation card to unlock function in CanvasWorkspace
• For use with Brother cutting machines.
• A free CanvasWorkspace (formerly ScanNCutCanvas) account and internet connection is necessary for activating the card.
Non-US Warranty: 30 days parts and labor.
Specifications
Click Here To View the New Brother ScanNCut Accessories Brochure for 2019(.PDF)Siser Glitter HTV Heat Transfer Vinyl Sheet- Grass 12'' x 20''
 |
Our Price: $7.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
Have you ever wanted to personalize your products or crafts? Then Siser Heat transfer vinyl (HTV) is the answer to your personalizing projects! Heat transfer vinyl is one of the least expensive and easiest to get involved in of all the garment decorating methods available, .
HTV is either a polyurethane (PU) or poly vinyl chloride (PVC) material that comes on a clear carrier sheet. Designs are then cut from the material while leaving the carrier intact for application.
Siser heat transfer vinyl is available in a wide selection of colors and finishes for your every need! Glitter, flock, glow in the dark, and even patterns are available!
There are several methods to cut HTV, such as desktop cutters like the Silhouette Cameo & Cricut, higher volume cutters such as the Roland GX-24 & Graphtec Expert, and the low-tech approach of cutting by hand with an X-Acto knife or paper punches!
Once your design is cut, the excess material that isn’t part of the design is removed or “weeded” away. Weeding is the process of taking a tool and pulling the excess material away from the carrier. When your design is cut and weeded, you can heat apply it to a variety of fabrics using a heat press or household iron on the correct fabric setting for a look that’s one of a kind every time! Heat transfer vinyl is so durable that, when applied properly, will outlast the shirt’s fabric.
HTV is either a polyurethane (PU) or poly vinyl chloride (PVC) material that comes on a clear carrier sheet. Designs are then cut from the material while leaving the carrier intact for application.
Siser heat transfer vinyl is available in a wide selection of colors and finishes for your every need! Glitter, flock, glow in the dark, and even patterns are available!
There are several methods to cut HTV, such as desktop cutters like the Silhouette Cameo & Cricut, higher volume cutters such as the Roland GX-24 & Graphtec Expert, and the low-tech approach of cutting by hand with an X-Acto knife or paper punches!
Once your design is cut, the excess material that isn’t part of the design is removed or “weeded” away. Weeding is the process of taking a tool and pulling the excess material away from the carrier. When your design is cut and weeded, you can heat apply it to a variety of fabrics using a heat press or household iron on the correct fabric setting for a look that’s one of a kind every time! Heat transfer vinyl is so durable that, when applied properly, will outlast the shirt’s fabric.
Non-US Warranty: 30 days parts and labor.
Urban Elementz UE1036 Evergreen Dotz - Panel
 |
Our Price: $28.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project16x25in.
Urban Elementz UE0810 Radiant Block - Winter
 |
Our Price: $15.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 11in block.
Urban Elementz UE0887 Daisy Dotz - Grey/Purple-Small
 |
Our Price: $14.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 12in block.
Urban Elementz UE1087 Hoppity
 |
Our Price: $8.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project5.25x6.5in.
Urban Elementz UE0806 Radiant Block - Spring
 |
Our Price: $15.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 11in block.
Urban Elementz UE0804 Radiant Block - Fall
 |
Our Price: $15.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 11in block.
Urban Elementz UE0707 Zen Flowers & Leaves - Large
 |
Our Price: $14.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 10in Block.
Urban Elementz UE1035 Evergreen Batik - Panel
 |
Our Price: $28.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 11in block.
Urban Elementz UE0808 Radiant Block - Summer
 |
Our Price: $15.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 11in block.
Urban Elementz UE0699 Hawaiian Holiday
 |
Our Price: $10.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 7.75in
Urban Elementz UE1034 Dragonfly Dotz - Set
 |
Our Price: $10.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project8.25x11in.
Urban Elementz UE0888 Daisy Dotz - Red - Small
 |
Our Price: $14.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your projectFits 12in block.
Urban Elementz UE1050 King of the Coop - Black
 |
Our Price: $10.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Laser cut applique pieces are precision cut applique shape with Steam-A-Seam fusible webbing already applied on the back.
Non-US Warranty: 30 days parts and labor.
Specifications
Just lay your background fabric, tee shirt, tote or pilliow, and you are ready to start the applique process. Simply peel the protective paper, place the precut shapes in the desired position and press shapes in place until the final pressing. Once satisfied with your placement, press the shapes with an iron and the design will be permanently bonded to your project9-1/4x9-1/2in
Brother CARSTS1 Rhinestone Transfer Sheet Set for Scan N Cut Starter Kit CARSKIT1
 |
Our Price: $16.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
7 of 12" x 12" Transfer Sheets (305mm x 305mm). For use with the Brother ScanNCut machine and the Rhinestone Starter Kit.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CABLDF1 Deep Cut Replacement Blade, Scan N Cut Machines CM650W CM550DX CM350R CM250 CM100DM
 |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Let the Deep Cut Blade do the hard work for you! This specially designed blade was made to cut thick materials like felt, denim and even leather. For use with ScanNCut Deep Cut Blade Holder (not included).
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CABLDP1 Standard Cut Replacement Blade for ScanNCut CM650W CM550DX CM350R CM250 CM100DM Machines, Not for DX Models
 43002: Brother CABLDP1 Standard Cut Replacement Blade for ScanNCut CM Machines, Not for DX |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The Standard Cut Blade can be used to cut a wide range of both fabric and paper! For use with ScanNCut Standard Cut Blade Holder (not included).
For Use With CM100DM, CM250, CM350, CM350H, CM350R, CM650W, Not for DX Models.
For Use With CM100DM, CM250, CM350, CM350H, CM350R, CM650W, Not for DX Models.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CAHLF1 Deep Cut Blade Holder for Scan N Cut Machines CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
 Brother CAHLF1 Deep Cut Blade Holder for Scan N Cut Machines CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
For use with ScanNCut Deep Cut Blade (not included)
For use with CM650W, CM550DX, CM350R, CM250, CM100DM ScanNCut Digital Cutting Machines
For use with CM650W, CM550DX, CM350R, CM250, CM100DM ScanNCut Digital Cutting Machines
Non-US Warranty: 30 days parts and labor.
Specifications
Main FeaturesFor Use With: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
Project Ideas and Instructions for Brother ScanNCut (.PDF)
Brother CAHLP1 Standard Cutting Blade Holder for Scan N Cut Machines CM650W, CM550DX, CM350R, CM250, CM100DM
 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
For use with ScanNCut Standard Cut Blade (not included).
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CAMATSTD12 Purple Standard Tacky Adhesive Mat 12x12" for Scan N Cut CM100DM CM250 CM350 CM350H CM350R CM550DX CM650W CM650WX DC200 Machines
 84498: Brother CAMATSTD12 Purple Standard Mat 12x12" for CM DC Scan N Cut Cutter Machines |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
ETA in 30 Days! Specially designed for a wide range of materials from fabrics to handmade papers, cutting up to 12” x 12”.
replaces CAMATF12 and CAMATM12
replaces CAMATF12 and CAMATM12
- Durability has improved about 1.5 times
• New Mats compatible with all ScanNCut machines and DesignNCut machines
For Use With
CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
Size: 12 inch X12 inch (305 millimetre x 305 millimetre)
Mat cutting area 11.7 inch X 11.7 inch (297.18 millimetre X 297.18 millimetre)
This mat is ideal for using the capture mat function with the DesignNCut machine
Other adhesive strength option: Low tack adhesive mat 12x12
This mat is compatible with Brother ScanNCut, ScanNCut2, and DesignNCut Series; for use with: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE only. Not compatible with SDX125, SDX125E, SDX125EGY or SDX85 models.
Non-US Warranty: 30 days parts and labor.
Specifications
This mat has tacky adhesive to secure the material for cutting and can be used numerous times. Specifically designed for a wide range of materials from fabrics to handmade papers‡. Ideal for material thickness ranging from 0.2 mm-1.5 mm.Item Dimensions LxWxH 13.98 x 0.05 x 17.59 inches
Brand Brother
Item Weight 0.23 Pounds
Item Thickness 1.5 Millimeters
Project Ideas and Instructions for Brother ScanNCut (.PDF)
Brother CAMATSTD24 Standard Mat 12x24" for CM650W/X Scan N Cut Cutter Machines*
 |
Our Price: $33.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Specially designed for cutting a large area on a wide range of materials from fabrics to handmade papers, cutting up to 12” x 24”. Scan function only applies to 12x12" not to 12x24. 12 x 24 mat should not be used for scanning purposes. Only for cutting or drawing.
replaces CAMATF24 and CAMATM24
replaces CAMATF24 and CAMATM24
- Durability has improved about 1.5 times
• New Mats compatible with all ScanNCut machines and DesignNCut machines
A Quick & Easy Tip for Keeping ScanNCut Mats Sticky by Julie Fei-Fan Balzer at Brother
I get asked lots of questions about how best to save your cutting mats. Mat maintenance is very easy. Getting the stick back on your mat is really easy, just be sure to use alcohol and fragrance free baby wipes! Watch the video for more
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CAMATLOW12 Low Tack Adhesive Mat 12x12" for CM650W/X Scan N Cut Machines, Replaces CAMATP12
 84496: Brother CAMATLOW12 Low Tack Adhesive Mat 12x12" for Scan N Cut Machines, Replaces CAMATP12 |
Our Price: $22.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Specially designed for delicate or thin paper like printer paper or vellum, cutting up to 12” x 12”.
Replaces CAMATP12.
Replaces CAMATP12.
- Durability has improved about 1.5 times
• New Mats compatible with all ScanNCut machines and DesignNCut machines
This 12” x 12” (305mm x 305mm) mat has tacky adhesive to secure material for cutting and can be used numerous times. Specifically designed for delicate paper like copy paper, vellum and thin scrapbook paper as well. Ideal for material thickness ranging from 0.1mm - 0.5mm.
A Quick & Easy Tip for Keeping ScanNCut Mats Sticky by Julie Fei-Fan Balzer at Brother
I get asked lots of questions about how best to save your cutting mats. Mat maintenance is very easy. Getting the stick back on your mat is really easy, just be sure to use alcohol and fragrance free baby wipes! Watch the video for more
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother ScanNCut CAMATLOW12 Low Tack Adhesive Mat 12 x 12 inch
Size: 12"X12" (305mm x 305mm)
Mat cutting Area 11.7x11. 7 (297.18mm x 297.18mm)
This mat is ideal for using the CaptureMat function with the DesignNCut machine.
Other adhesive strength option: standard mat 12x12
This mat is compatible with Brother ScanNCut, ScanNCut2, and DesignNCut series.
For use with ScanNCut machine.
Brother CAVINYLWT 6 FT x12" Roll White Adhesive Craft Vinyl for ScanNCut Cutters CM650W, CM350R, CM550, CM250, CM100
 |
Our Price: $17.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Brother CAVINYLWT 6 FT Roll White Adhesive Craft Vinyl for ScanNCut Cutters
Non-US Warranty: 30 days parts and labor.
Brother CAMATS12 Photo Scanning Mat 12x12in for Scan N Cut Cutter Machines* CM650W, CM550DX, CM350R, CM250, CM100DM
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Specially designed for scanning up to 12x12" delicate materials such as photos and precious documents. Do not use for cutting. For use with ScanNCut machine.
these are not for use with the new DC200)
these are not for use with the new DC200)
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CAVINYLSR 6 FT x12" Roll Silver Adhesive Craft Vinyl for ScanNCut Cutters CM650W, CM350R, CM550, CM250, CM100
 |
Our Price: $15.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This adhesive craft vinyl is removable on most non-porous surfaces. Adhere to glass, plastic, metal, walls, and virtually any non-porous surface with ease.
Non-US Warranty: 30 days parts and labor.
Brother CAVINYLPM 6 FT x12" Roll Plum Adhesive Craft Vinyl for ScanNCut Cutters , CM650W, CM350R, CM550, CM250, CM100
 |
Our Price: $15.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Brother CAVINYLPM 6 FT x12" Roll Plum Adhesive Craft Vinyl for ScanNCut Cutters
Non-US Warranty: 30 days parts and labor.
Brother CAUNIPHL1 Universal Pen Pencil Holder for ScanNCut Pens and Cutters on CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200*
 |
Our Price: $22.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The Universal Pen Holder allows for more creative freedom when drawing with the ScanNCut and ScanNCut2 machines. Fits most pens and writing instruments. Use on various drawing surfaces such as paper, fabric, or another mediums.
CAUNIPHL1
Universal Pen Holder
Fits most pens and writing instruments
Use your own writing instrument
For Use With: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
CAUNIPHL1
Universal Pen Holder
Fits most pens and writing instruments
Use your own writing instrument
For Use With: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
Non-US Warranty: 30 days parts and labor.
Specifications
New Universal Pen Holder with Brother ScanNCut2, With the new Universal Pen Holder from Brother, not only can you use the specialized Brother ScanNCut pens, but you can use your own markers and pens to create just the look you want with your new Brother ScanNCut2 machine!New ScanNCut2 Accessories Features Overview, The new ScanNCut2 is exciting innovative technology from Brother. With its launch, come new and exciting accessories to take crafting projects to the next level. Watch to learn more.
Brother CAUNIPHL2 Small Barrel Pen Holder and Stand for ScanNCut Pens and Cutters, Compatible with new DX and SDX Models
 94867: Brother CAUNIPHL2 Small Barrel Pen Holder for ScanNCut Pens and Cutters |
Our Price: $22.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Broaden the range of your projects with the Small Barrel Pen Holder! Perfect for those smaller barrel sizes, this accessory will give you the ability to use your favorite pen such as gel pens and small barreled markers!
Non-US Warranty: 30 days parts and labor.
Brother CAVINYLBE 6 FT x12" Roll Blue Adhesive Craft Vinyl for ScanNCut Cutters CM650W, CM350R, CM550, CM250, CM100
 |
Our Price: $17.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Brother CAVINYLBE 6 FT Roll Blue Adhesive Craft Vinyl for ScanNCut Cutters
Non-US Warranty: 30 days parts and labor.
Brother CAVINYLRD 6 FT x12" Roll Red Adhesive Craft Vinyl for ScanNCut Cutters CM650W, CM350R, CM550, CM250, CM100
 |
Our Price: $17.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Brother CAVINYLRD 6 FT Roll Red Adhesive Craft Vinyl for ScanNCut Cutters
Non-US Warranty: 30 days parts and labor.
Brother CAVINYLGD 6 FT x12" Roll Gold Adhesive Craft Vinyl for ScanNCut Cutters CM650W, CM350R, CM550, CM250, CM100
 |
Our Price: $15.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Brother CAVINYLGD 6 FT Roll Gold Adhesive Craft Vinyl for ScanNCut Cutters
Non-US Warranty: 30 days parts and labor.
Brother CAMATS24 12x24" Scanning Mat for CM650W/X ScanNCut Cutters
 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
• Great for scanning applique and doll clothes patterns.
• Designed for scanning delicate materials such as photos and precious documents.
• Not for cutting use.
• Instructions included.
these are not for use with the new DC200)
• Designed for scanning delicate materials such as photos and precious documents.
• Not for cutting use.
• Instructions included.
these are not for use with the new DC200)
Non-US Warranty: 30 days parts and labor.
Specifications
Learn More About All of the Different ScanNCut Mats Available, Learn more about the Scanning Mat, the Low Tack Mat, the Middle Tack Mat and the Standard Mat for use with your Brother ScanNCut machine. Mats are also available in the standard 12" by 12" size and the special 12" by 24" size.Brother CAPSSMINI1 Mini Printable Sticker Sheets for ScanNCut Cutters
 Brother CAPSSMINI1 Mini Printable Sticker Kit Set for ScanNCut Cutters CM650W, CM350R, CM550, CM250, CM100 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The sticker kit has been discontinued by Brother. Therefore, This is just a refill for people who already have the kit
Just print your favorite image, cut and create your own design stickers and labels! Great for crafters, small business, and home use. Now in postcard size: 3.9” x 5.8” (100mm x 148 mm). A great size for printing photos and turning them into stickers!
Non-US Warranty: 30 days parts and labor.
Brother CAVINYLTPG Roll 6x12" Roll Clear Material Adhesive Transfer Paper with Grid for ScanNCut Cutters CM660W, CM350R, CM550, CM250, CM100
 63463: Brother CAVINYLTPG Roll 6x12" Roll Clear Adhesive Transfer Paper with Grid for ScanNCut Cutters |
Our Price: $17.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Printed grid for easy alignment of vinyl cut designs. Clear material for easy placement onto most surfaces. For use with ScanNcut adhesive craft vinyl to create your own one-of-a kind signs, stencil, glass etching, home décor, and so much more.
Non-US Warranty: 30 days parts and labor.
Brother CAVINYLMP Adhesive Craft Vinyl 10 Sheets 12x12" Asst Colors for ScanNCut Cuttters CM650W, CM350R, CM550, CM250, CM100
 |
Our Price: $22.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This adhesive craft vinyl is removable on most non-porous surfaces. Adhere to glass, plastic, metal, walls, and virtually any non-porous surface with ease. Use the gridded transfer paper for application (sold separately).
For Use With: CM100DM, CM250, CM350, CM550DX, CM650W
For Use With: CM100DM, CM250, CM350, CM550DX, CM650W
Non-US Warranty: 30 days parts and labor.
Brother CAVINYLBK 6'x12" Roll Black Adhesive Craft Vinyl for ScanNCut CM650W, CM350R, CM550, CM250, CM100, Included with Roll Feeder for SDX225
 |
Our Price: $17.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Brother CAVINYLBK 6 FT Roll Black Adhesive Craft Vinyl for ScanNCut Cutters
Non-US Warranty: 30 days parts and labor.
Brother CAPEN1 6-Color Pens for ScanNCut Digital Cutting CM Machines CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
 Brother CAPEN1 6-Color Pens for ScanNCut Digital Cutting CM Machines CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE |
Our Price: $13.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This set includes six craft color pens with permanent ink, for drawing and tracing on paper. For use with ScanNCut Pen Holder (not included). Always keep cap on when not in use.
Main Features
For Use With: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
Main Features
For Use With: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother CAPEN2 Erasable Pens Scan N Cut Machines CM Models:CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
 Brother CAPEN2 Erasable Pens Scan N Cut Machines CM Models:CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
These pens are perfect for drawing seam allowances or creating other temporary markings on your fabric! The ink in the blue pen can be erased by water while the ink in the purple pen is design to disappear within 2-14 days of application. For use with ScanNCut Pen Holder (not included).
Non-US Warranty: 30 days parts and labor.
Specifications
The Brother Scan N Cut Erasable Pen Set CAPEN2 is for use on fabric. The ink contained in the Brother Scan N Cut Erasable Pen Set CAPEN2 can be erased by water, and the ink in the purple pen is designed to disappear within 2-14 days of application. The Brother Scan N Cut Erasable Pen Set CAPEN2 is designed for use with the ScanNCut Pen Holder (not included).Project Ideas and Instructions for Brother ScanNCut (.PDF)
Brother CAPENHL1 Pen Holder for Scan N Cut Machines CM: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
 43008: Brother CAPENHL1 Pen Holder for Scan N Cut Machines CM: CM650W CM550DX CM250 CM100DM |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
For use with ScanNCut Pens (not included).
CAPENHL1
Pen Holder
For use with ScanNCut Pens
For Use With: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
CAPENHL1
Pen Holder
For use with ScanNCut Pens
For Use With: CM100DM, CM250, CM350, CM350H, CM350R, CM550DX, CM650W, CM650WX, DC200, DC200ULE
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother ScanNCut CAUSB1 No.1 Quilt Pattern Collection by Suzuko Koseki on USB Stick
 |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
for use with the CM550DX, CM250D, and CM100DM Scan N Cut Machines. Complete your favorite quilting projects with this exciting collection!
The Brother Scan N Cut Quilt Pattern Collection for CM550DX includes designs shown on a USB stick. The Brother Scan N Cut Quilt Pattern Collection for CM550DX is compatible with the Scan N Cut CM550DX. All designs on the Brother Scan N Cut Quilt Pattern Collection for CM550DX were created by Japanese quilter Suzuko Koseki.
Add an extra touch to your latest project with our Home-Deco Pattern Collection and 3D Paper Craft
Pattern Collection. USB contains cutting patterns and a pattern list.
The Brother Scan N Cut Quilt Pattern Collection for CM550DX includes designs shown on a USB stick. The Brother Scan N Cut Quilt Pattern Collection for CM550DX is compatible with the Scan N Cut CM550DX. All designs on the Brother Scan N Cut Quilt Pattern Collection for CM550DX were created by Japanese quilter Suzuko Koseki.
Add an extra touch to your latest project with our Home-Deco Pattern Collection and 3D Paper Craft
Pattern Collection. USB contains cutting patterns and a pattern list.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother ScanNCut CAUSB2 No.2 Appliqué 50 Pattern Collection USB Stick
 |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Add an extra touch to your latest project with this pattern collection!
The Brother Scan N Cut Applique Pattern Collection No. 2 is compatible with the Brother CM550DX ScanNCut. The Brother Scan N Cut Applique Pattern Collection No. 2 is loaded on a usb stick for esy use. The Brother Scan N Cut Applique Pattern Collection No. 2 designs were created by Japanese quilter Akiki Endo.
Add an extra touch to your latest project with our Home-Deco Pattern Collection and 3D Paper Craft
Pattern Collection. USB contains cutting patterns and a pattern list.
Project Ideas and Instructions for Brother ScanNCut (.PDF)
The Brother Scan N Cut Applique Pattern Collection No. 2 is compatible with the Brother CM550DX ScanNCut. The Brother Scan N Cut Applique Pattern Collection No. 2 is loaded on a usb stick for esy use. The Brother Scan N Cut Applique Pattern Collection No. 2 designs were created by Japanese quilter Akiki Endo.
Add an extra touch to your latest project with our Home-Deco Pattern Collection and 3D Paper Craft
Pattern Collection. USB contains cutting patterns and a pattern list.
Project Ideas and Instructions for Brother ScanNCut (.PDF)
Non-US Warranty: 30 days parts and labor.
Brother CASTBL1 Iron On Fabric Applique Contact Sheet 36x18.5" for ScanNCut CM: Including CM650W, CM550DX, CM350R, CM250, CM100DM, Etc.
 |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
for use with the for CM650W, CM550DX, CM350R, CM250, CM100DM Scan N Cut Machines. back of fabric. Use with Standard Mat for cutting (not included). For Piecing projects like patchwork, use High Tack Adhesive Fabric Support Sheet (not included). Not for use on textured fabrics that cannot be ironed.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother ScanNCut CASTBL2 High Tack Adhesive Fabric Support 4 Sheets 12x12"
 43010: Brother ScanNCut CASTBL2 High Tack Adhesive Fabric Support 4 Sheets 12x12" |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
for use with the Scan N Cut Machine low tack mats. Designed for multiple uses (depending on fabric type). Use with Standard Mat for cutting (not included). For cutting patterns without seam allowance, use Iron-On Fabric Applique Contact Sheet (not included). Apply sheet with adhesive area on the mat.
Non-US Warranty: 30 days parts and labor.
Specifications
Project Ideas and Instructions for Brother ScanNCut (.PDF)Brother ScanNCut CASTBL3 Iron-On Fabric Applique Contact 2 Sheets 12 x 16in
 96290: Brother ScanNCut CASTBL3 Iron-On Fabric Applique Contact 2 Sheets 12x16" |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Iron-on permanent sheet for back of fabric. Use with Standard Mat for cutting (not included).
For Piecing projects like patchwork, use High Tack Adhesive Fabric Support Sheet (not included).
Not for use on textured fabrics that cannot be ironed.
DESCRIPTION
—
Iron-on permanent sheet for back of fabric. Use with Brother ScanNCut machine. Iron for about 20 seconds (depending on fabric type). For Piecing projects like patchwork, use High Tack Adhesive Fabric Support Sheet (not included). Not for use on textured fabrics that cannot be ironed.
For installation instructions, please refer to your machine’s user manual.
3.15x1.772x20.866
For Piecing projects like patchwork, use High Tack Adhesive Fabric Support Sheet (not included).
Not for use on textured fabrics that cannot be ironed.
DESCRIPTION
—
Iron-on permanent sheet for back of fabric. Use with Brother ScanNCut machine. Iron for about 20 seconds (depending on fabric type). For Piecing projects like patchwork, use High Tack Adhesive Fabric Support Sheet (not included). Not for use on textured fabrics that cannot be ironed.
For installation instructions, please refer to your machine’s user manual.
3.15x1.772x20.866
Non-US Warranty: 30 days parts and labor.
Specifications
How to use the iron-on fabric applique contact sheetProject Ideas and Instructions for Brother ScanNCut (.PDF)
Brother TZEMPPF31 P-Touch Embellish Black on Purple Floral Pattern Tape 12mm (~1/2") x 4m
 95228: Brother P-Touch Embellish Black on Purple Floral Pattern Tape 12mm (~1/2") x 4m |
Availability: Retail Store Only Condition: New In Box |
Features
Media Width: 15/32"
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Floral
Color: Purple
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Floral
Color: Purple
Non-US Warranty: 30 days parts and labor.
Specifications
Product OverviewUPC Code: 012502645634
Manufacturer Warranty: 1 Year
D&H Returns Allowed: no
Return Period (Days): 0
Add'l Return Info: Past Exch-Call Brother 800-284-4329
Master Pack Qty: 20
Country of Origin: CHINA
General Information
Manufacturer: Brother Industries, Ltd
Manufacturer Part Number: TZEMPPF31
Manufacturer Website Address: www.brother-usa.com
Brand Name: Brother
Product Name: P-Touch Embellish Black on Purple Floral Pattern Tape 12mm (
- 1/2") x 4m
Packaged Quantity: 1
Product Type: Label Tape
Product Information
Media Width: 15/32"
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Floral
Physical Characteristics
Color: Purple
Miscellaneous
Compatibility: Brother P-Touch Embellish Ribbon Printer
Country of Origin: China
Brother TZEMPMC31 P-Touch Embellish Black on Purple Floral Pattern Tape 12mm (~1/2") x 4m
 95230: Brother P-Touch Embellish Black on Purple Floral Pattern Tape 12mm (~1/2") x 4m |
Availability: Retail Store Only Condition: New In Box |
Features
Media Width: 15/32"
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Chevron
Color: Mint
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Chevron
Color: Mint
Non-US Warranty: 30 days parts and labor.
Specifications
Product OverviewUPC Code: 012502645689
Manufacturer Warranty: 1 Year
D&H Returns Allowed: yes
Return Period (Days): 50
Add'l Return Info: Past Exch-Call Brother 800-284-4329
Master Pack Qty: 20
Country of Origin: CHINA
General Information
Manufacturer: Brother Industries, Ltd
Manufacturer Part Number: TZEMPMC31
Manufacturer Website Address: www.brother-usa.com
Brand Name: Brother
Product Series: TZe
Product Name: P-Touch Embellish Black on Mint Chevron Pattern Tape 12mm (
- 1/2") x 4m
Packaged Quantity: 1
Product Type: Label Tape
Product Information
Media Width: 15/32"
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Chevron
Physical Characteristics
Color: Mint
Miscellaneous
Compatibility:
Brother P-Touch Embellish Ribbon Printer
Country of Origin: China
Brother SDX125E ScanNCut DX Auto Blade Depth, Cuts 3mm Thickness, Quieter, 682 Built-in Designs, 600dpi Scanner, On screen Editing, Wifi Ready
 Brother SDX125E ScanNCut DX Auto Blade Depth, Cuts 3mm, Quieter |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
1 Left In Stock! ScanNCut DX Innovis Edition is packed with so many new features for virtually endless possibilities in cutting thicker materials with the new AutoBlade, Wireless network ready.
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
*Only the new SDX325 and SDX330D have the My. Connection link to the XP2. There will not be an upgrade available for the previous or other DX models to have this feature.* Brother
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
*Only the new SDX325 and SDX330D have the My. Connection link to the XP2. There will not be an upgrade available for the previous or other DX models to have this feature.* Brother
- 682 built-in designs
- Cuts materials up to 3mm in thickness‡
- 600dpi built-in scanner with on screen editing
Main Features
- Blade Sensor Technology: Auto blade detects the thickness of material, no blade adjustment or material selection required.
- Cut Up To 0.1” (3 mm) in Thickness: The Brother Home Electronic Cutting Machine effortlessly cuts materials‡ such as foam and felt with the Auto Blade.
- On-Screen Editing: Editing designs is fast and easy. This ScanNCut machine comes with a 5” LCD touchscreen display.
- Stand-Alone: Create a project right out of the box without using a computer or mobile device.
- Fully Detailed Designs: Features a total of 682 built-in designs, including 100 quilt patterns, and 9 letter fonts, this Brother Cutting Machine produces detailed work.
- Wireless Network Ready: Wirelessly connect‡ your PC or mobile device to transfer cut data from the Brother CanvasWorkspace application.
- Perfect for Quilters and Sewers: The Brother SDX125 Electronic Cutting Machine provides a ¼” increment seam allowance to piece together fabric.
- Advanced editing with Canvasworkspace Free software to create, edit, convert and send cut data to and from the machine
What's the formula for perfect crafting success? Just add imagination! Now, the only series of home and hobby cutting machine with a built-in scanner has essentially everything else you need to create stunning projects right out of the box. With Brother's ScanNCut DX perfect crafting success becomes a reality. The Brother ScanNCut DX was designed for the hobby enthusiast who is looking for an efficient and clean way to cut materials such as felt and foam without frays or damage. Brother’s Auto Blade sensor technology automatically detects the thickness of your materials to cut precise custom and built-in patterns. The Brother SDX125E ScanNCut cutting machine comes with 682 built-in designs, including 100 quilt patterns, and 9 letter fonts—these provide you with multiple ways to quickly create and edit designs on the 5” LCD touchscreen display, plus 76 SVG files included, Birthday Collection, Greeting Cards Collection, Flowers & Valentines Collection (Available with CanvasWorkspace for web only). Visit at: https://canvasworkspace.brother.com
This electronic cutting machine is perfect for sewers and quilters. With the Brother SDX125E, struggling to piece together fabric when working on various sewing and quilting projects is a thing of the past. The Brother ScanNCut DX gives you the ability to add a seam allowance in ¼” increments to assist you in assembling fabric pieces for your quilts, clothing, and more.
With a simple internet connection, you’ll be able to access and work with Brother CanvasWorkspace to create virtually anywhere and anytime. Work remotely with your tablet, mobile device, or PC. This Brother cutting machine is wireless network ready. While connected to the same internet network, wirelessly send your cut files directly to your Brother ScanNCut DX. The Brother SDX125 is also whisper quiet, allowing you to cut materials with ease and without disturbing others. This Brother machine is backed by a 1 year limited warranty along with free customer phone and online technical support for the life of the product.
Brother SDX125e Software Update
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
ABOUT THE PRODUCTThe ScanNCut DX is the only series of home and hobby cutting machine with a built-in scanner & has essentially everything you need to create stunning projects right out of the box. The Brother ScanNCut DX was designed for the hobby enthusiast who is looking for an efficient and clean way to cut materials such as felt and foam (up to 3MM thick!) without frays or damage. Brother’s Auto Blade sensor technology automatically detects the thickness of your materials to cut precise custom and built-in patterns. The Brother SDX125E ScanNCut cutting machine comes with 682 built-in designs, including 100 quilt patterns, and 9 letter fonts—these provide you with multiple ways to quickly create and edit designs on the 5” LCD touchscreen display, plus 76 SVG files included, Birthday Collection, Greeting Cards Collection, Flowers & Valentines Collection (Available with CanvasWorkspace for web only).
This electronic cutting machine is perfect for sewers and quilters. With the Brother SDX125E, struggling to piece together fabric when working on various sewing and quilting projects is a thing of the past. The Brother ScanNCut DX gives you the ability to add a seam allowance in ¼” increments to assist you in assembling fabric pieces for your quilts, clothing, and more.
With a simple internet connection, you’ll be able to access and work with Brother CanvasWorkspace to create virtually anywhere and anytime. Work remotely with your tablet, mobile device, or PC. This Brother cutting machine is wireless network ready. While connected to the same internet network, wirelessly send your cut files directly to your Brother ScanNCut DX. The Brother SDX125 is also whisper quiet, allowing you to cut materials with ease and without disturbing others. This Brother machine is backed by a 1 year limited warranty along with free customer phone and online technical support for the life of the product.
Work Area 12" x 24" with optional mat
Dimensions:
Carton Dimensions (W" x D" x H") 12.25" x 25.0" x 12.1"
Carton Weight (lbs) 18.0
Unit Weight (lbs) 12.79
General:
Built-In Designs 682
Built-In Fonts 9
Built-In Memory Yes
Built-In Quilt Designs 100
Direct Connection Via USB Cable Yes
On-Screen Editing Yes
USB Slots Yes
Wireless Connection to PC or Tablet Yes
Wireless Network Ready Yes
Zoom Function Yes
Scanning:
Background Scan Adjustment Darker, Lighter
File Formats Supported FCM, SVG
Maximum Scanning Width (in.) 11.7
Scan to USB Yes
Scanner Capabilities Yes
Scanner Resolution (DPI) 600
Scan-to-Cut Data Detection type: Outline, Detection type: Region, Detection type: Line (Thinning)
Brother ScanNCut SDX325F +12x12' Fabric Mat +USB & Wifi for XP2 XP3 w/My Connection+$840 Extras+1303 Design. Optional Rotary Auto Blade Kit $49.99
 Brother ScanNCut SDX325F 12" x 24" Scanner and Cutter with Fabric Mat Included |
Our Price: $749.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
When it comes time to up your fabric crafting game with fabric appliqués, felt, foam, reach for the fabric-inspired ScanNCut DX SDX325, 9 Optional Disney Patterns
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
9 Optional Disney Pattern Collections for ScanNCut Canvas so you do not need a ScanNCut Disney model to have access to Disney Designs!
*Only the new SDX325 and SDX330D have the My Connection link to the XP2. There will not be an upgrade available for the previous models to have this feature.*
*Send Designs to and from SDX325 to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.
For the crafting hobbyist who loves fabric, the ScanNCut DX SDX325 is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.
With 1303 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX325 can provide endless creativity. The stand-alone SDX325 has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.
With the Thin Fabric Auto Blade, you can cut fabric for quilting and raw edge applique purposes so you can quilt with ease and save time by cutting multiple pieces for your projects. Combine your love of fabric and crafting into one with the SDX325
PLUS, OVER $720 IN ADDED VALUE!
• Thin Fabric Auto Blade and Holder $43.98 MSRP
• Erasable Pen Set (2 pcs) $14.99 MSRP
• Fabric Mat 12" x 12" $39.99 MSRP
• Iron-on Fabric Appliqué Contact Sheets (2 pcs) $14.99 MSRP
• Built-in One Point Designs 1,163 ($575.19 Value)
• Built-in Quilt Designs 140 ($39.60 Value)
* Synchrony Bank Sewing & More Card, Fixed Monthly Payments, 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval, then Checkout Online Purchases
Cutting fabric is easy! For the crafting hobbyist who loves fabric, the SDX325 is the perfect addition to any sewing studio or craft room. Create beautiful projects with the ScanNCut DX Innovis Edition Fabric Bundle! The ScanNCut DX is the only cutting machine on the market with true blade sensing technology and a built-in scanner! The blade sensing technology allows you to cut materials up to 3 MM in thickness‡ without adjusting your blade pressure settings and the built-in scanner adds an extra element to your creativity. Scan in fabric and easily cut out applique with the direct cut function or turn a hand made drawing into a sticker the creativity is endless with the ScanNCut DX line up! The ScanNCut DX Innovis Edition is the only ScanNCut DX that can read PES/PHX files!‡ Pull embroidery files from your XP2 or Luminaire to create drawings, foiling accents and embossing projects!
Click here for more information on the Brother SDX325F (.pdf)
This is the perfect companion for the Stellaire or Luminaire!
Features:
BLADE SENSOR TECHNOLOGY
• Auto Blade detects the thickness of material
CUTS UP TO 0.1˝ (3 MM) THICKNESS
• Cut materials such as foam and felt effortlessly with Auto Blade‡
WIRELESS LAN WITH MY CONNECTION
• The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the 'My Connection' tile.
STAND-ALONE (NO PC REQUIRED)
• 5" LCD touchscreen display for easy editing of cut data
ADVANCED EDITING WITH CANVASWORKSPACE
• Create, edit, convert, and send cut data to and from the machine PES/PHC/PHX FILE READABILITYˆ
• Convert PES/PHC/PHX embroidery fi les to cut data directly
on the machine^
• Use most PES/PHC/PHX embroidery fi les for drawing, embossingˇ and foilingˇ data
BUILT-IN SCANNER (900 DPI)
• Scan in fabric so you can easily turn creative handmade drawings into your next fun project.
*Matless Cutting – Roll Feeder Attachment
**Optional Accessory Available
Built-In Designs:
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores
9 Optional Disney Pattern Collections for ScanNCut Canvas so you do not need a ScanNCut Disney model to have access to Disney Designs!
*Only the new SDX325 and SDX330D have the My Connection link to the XP2. There will not be an upgrade available for the previous models to have this feature.*
*Send Designs to and from SDX325 to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.
For the crafting hobbyist who loves fabric, the ScanNCut DX SDX325 is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.
With 1303 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX325 can provide endless creativity. The stand-alone SDX325 has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.
With the Thin Fabric Auto Blade, you can cut fabric for quilting and raw edge applique purposes so you can quilt with ease and save time by cutting multiple pieces for your projects. Combine your love of fabric and crafting into one with the SDX325
PLUS, OVER $720 IN ADDED VALUE!
• Thin Fabric Auto Blade and Holder $43.98 MSRP
• Erasable Pen Set (2 pcs) $14.99 MSRP
• Fabric Mat 12" x 12" $39.99 MSRP
• Iron-on Fabric Appliqué Contact Sheets (2 pcs) $14.99 MSRP
• Built-in One Point Designs 1,163 ($575.19 Value)
• Built-in Quilt Designs 140 ($39.60 Value)
* Synchrony Bank Sewing & More Card, Fixed Monthly Payments, 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval, then Checkout Online Purchases
Cutting fabric is easy! For the crafting hobbyist who loves fabric, the SDX325 is the perfect addition to any sewing studio or craft room. Create beautiful projects with the ScanNCut DX Innovis Edition Fabric Bundle! The ScanNCut DX is the only cutting machine on the market with true blade sensing technology and a built-in scanner! The blade sensing technology allows you to cut materials up to 3 MM in thickness‡ without adjusting your blade pressure settings and the built-in scanner adds an extra element to your creativity. Scan in fabric and easily cut out applique with the direct cut function or turn a hand made drawing into a sticker the creativity is endless with the ScanNCut DX line up! The ScanNCut DX Innovis Edition is the only ScanNCut DX that can read PES/PHX files!‡ Pull embroidery files from your XP2 or Luminaire to create drawings, foiling accents and embossing projects!
Click here for more information on the Brother SDX325F (.pdf)
This is the perfect companion for the Stellaire or Luminaire!
Features:
BLADE SENSOR TECHNOLOGY
• Auto Blade detects the thickness of material
CUTS UP TO 0.1˝ (3 MM) THICKNESS
• Cut materials such as foam and felt effortlessly with Auto Blade‡
WIRELESS LAN WITH MY CONNECTION
• The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the 'My Connection' tile.
STAND-ALONE (NO PC REQUIRED)
• 5" LCD touchscreen display for easy editing of cut data
ADVANCED EDITING WITH CANVASWORKSPACE
• Create, edit, convert, and send cut data to and from the machine PES/PHC/PHX FILE READABILITYˆ
• Convert PES/PHC/PHX embroidery fi les to cut data directly
on the machine^
• Use most PES/PHC/PHX embroidery fi les for drawing, embossingˇ and foilingˇ data
BUILT-IN SCANNER (900 DPI)
• Scan in fabric so you can easily turn creative handmade drawings into your next fun project.
*Matless Cutting – Roll Feeder Attachment
**Optional Accessory Available
Built-In Designs:
- 1,303 built-in designs
- Including 140 quilt patterns
My Connection Feature
Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- 5" LCD Touch Screen Display
- Storage Compartments
- Up to 600 DPI (Scan to USB Function)
- Accommodates 12" x 12" and 12" x 24" cutting mats, plus 12" x 12" and 12" x 24" scanning mats
- 11.7" Width Scanning Area / 11.7" Width Cutting Area
- Cuts up to 3mm thick‡
- Wireless LAN with My Connection
- File Formats Supported: PHX, PES, SVG
Material Compatibility: Printer Paper, Scrapbook, Cardstock, Tracing Paper, Velum, Poster Board, Thin Cotton, Felt, Flannel, Magnet, Sticker, Seal
Work Area: 12" x 12"
Version 1.85 Software Update Now Available for the ScanNCut DX Series and Version 2.4.0 CanvasWorkspace for All ScanNCut Series Electronic Cutting Machines
We would like to inform you we have released a software update version 1.85 for the ScanNCut DX Series of Electronic Cutting Machines on Brother Solutions Center. Updating your ScanNCut DX with this software will give you access to a weeding box function, additional size settings in the editing screen, and ability to use "My Collection" with optional Pattern Collections.
Version 2.4.0 of the CanvasWorkspace(Win/Mac) will enhance your experience in this PC application.
The software update provides the following:
- Added the "20min" auto shutdown option to the settings screen.
We would like to inform you we have released a software update for SDX325 and SDX330D on Brother Solutions Center. "My Connection" function (sending and retrieving data between the cutting machine and embroidery machine) has been added. For the detail of the function, refer to "My Connection" Operation Manual.
Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
Brother PTP715EBT P-Touch Embellish Elite Bluetooth Connectable Decorative Ribbon Tape Printer for up to 1" Wide, Replaces PTD215e for up to 1/2" Wide
 103663: Brother PTP715EB P-Touch Embellish Elite Connectable Decorative Ribbon Tape Printer up to 1"Wide |
Availability: Only available with a machine bundle promotion Condition: New In Box |
Features
for Crafters of All Levels, Make mom's day special with the P-touch Embellish ELITE Connectable Decorative Ribbon & Tape Printer. Decorate and design on the spot with personalized satin ribbons, decorative and washi tapes. Add a thoughtful, extra-special touch to gifts, crafts and so much more.
Great for gift-wrapping craft projects and more! This 9.5x10x3.75 Inch package contains one ribbon and tape printer with pre-designed templates, fourteen fonts, ninety- four frames and over 400 symbols, one touch keys for easy formatting, 13.1 Feet of .47 Inch wide gold on white satin ribbon and one user's guide. Required six AAA batteries not included.
Great for gift-wrapping craft projects and more! This 9.5x10x3.75 Inch package contains one ribbon and tape printer with pre-designed templates, fourteen fonts, ninety- four frames and over 400 symbols, one touch keys for easy formatting, 13.1 Feet of .47 Inch wide gold on white satin ribbon and one user's guide. Required six AAA batteries not included.
- Design and print unique decorative ribbon and tape accents up to
- 1”
- Elevate crafting skills using your smartphone, tablet with the P-touch Design&Print2 app or P-touch Editor software from your PC
- Pre-designed craft templates inspire creativity
The Brother P-touch Embellish ELITE Connectable Decorative Ribbon and Tape Printer PTP715eBT, is a unique, Bluetooth® enabled crafting machine that uses - 1” (24mm) wide ribbons and decorative tapes, offering more fonts, more symbols and even more design options to inspire your inner crafter. Easily connect with free design software available on your smartphone, tablet or PC to design and print imaginative, customized ribbon and tape accents to add your very own personalized touches to parties, gifts, organization, crafts and so much more with virtually unlimited creative freedom.
Main Features
- MAKE EVERY CRAFT UNIQUE WITH PERSONALIZED RIBBON AND TAPE ACCENTS Easily design and print decorative ribbons and tapes to add a thoughtful, extra-special touch to gifts, party favors, crafts, scrapbooks, craft storage and so much more.
- CRAFTING MADE SIMPLE Crafters of all levels will be inspired by the collection of craft templates, fonts, patterns, symbols and emojis available via smartphone, tablet or PC.
- ELEVATE CRAFTING SKILLS USING CONNECTABLE TECHNOLOGY Wirelessly connect to a smartphone or tablet and use the free Design&Print2 app* to access craft-focused templates to create your own custom ribbons and tapes.
- PERSONALIZE CREATIONS WITH YOUR OWN DESIGNS Unleash your creative freedom by connecting the P-touch Embellish ELITE to a PC and using FREE P-touch Editor software to upload and incorporate custom graphics and images into your designs.
- A VARIETY OF SATIN RIBBONS AND DECORATIVE TAPES Expand your creativity with P-touch Embellish
- 1” (24mm) wide satin ribbons and decorative tapes plus P-touch Embellish
- 1/2” (12mm) wide ribbons, decorative and washi tapes for more possibilities.
See More Videos on the new Brother PTP715EB P-Touch Embellish Elite Connectable Decorative Ribbon Tape Printer up to 1"Wide
IMAGINE, ENHANCE
AND EMBELLISH
THE MOMENTS THAT
MATTER
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Technical InformationBack-lighting - N/A
Barcodes (connected to a computer) - Yes
Barcodes (Stand-alone mode) - Yes
Built-In Handle - No
Compatible Tape Families - TZe
Compatible Tape Widths‡ - 24mm
Cutter Type - Automatic
Housing Color - White
Keyboard Layout - None
LCD Display - No
Maximum Print Resolution - 180 x 360
Maximum Print Speed (mm/sec) - 30
Mobile Device Compatibility‡ - Yes
Mobile Device Printing App‡ - Yes
Model Type - No Keyboard (Keyboard-less)
Preview Key - N/A
Tape Length‡ (ft.) - 13.1
Tape Technology - Thermal Transfer
Tape Type Compatibility - Standard Laminated, Flexible ID, Extra Strength Adhesive, Acid Free, Tamper Evident, Non-Laminated Iron-on Fabric, Satin Ribbon
Tape Types‡ - Laminated, Standard Laminated, Flexible ID, Extra Strength Adhesive, Iron-on Fabric, Acid Free, Tamper Evident
Display & Graphics
Built-in Decorative Ribbon & Label Templates - Yes
Built-In Designs/Templates - 90+ P-touch Design&Print, 220+ P-touch Editor Software
Built-In Symbols - 1000+ P-touch Design&Print, 900+ P-touch Editor Software
Font Styles - True Type
Fonts - Uses most Google and Apple® font libraries, TrueType
Horizontal Alignment - Left, Center, Right, Justified
Label Length Setting - Yes
Labeler Features - Ribbon Printing, Barcoding, Auto Power Off, Vertical Printing, Mirror Printing
Maximum Print Lines - 4
Number of Font Styles - TrueType
Number of Text Frame Types - 167
Operating System Compatibility - Mac OS X 10.11.x, iOS 5/6/7/8 or later, Android 2.2 or later, Mac OS X 10.12.x, Mac OS X 10.13.x, Windows® 7, Windows® 8/8.1, Windows® 10
Brother ScanNCut Demo RSDX325F, 12x12" Fabric Mat, 12x24" Scanner Cutter, Auto Blades +Holders, Wifi for XP w/My Connection, 1303 Designs
Brother ScanNCut SDX325F 12" x 24" Scanner and Cutter with Fabric Mat Included |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: Floor Model |
Features
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores
9 Optional Disney Pattern Collections for ScanNCut Canvas so you do not need a ScanNCut Disney model to have access to Disney Designs!
*Only the new SDX325 and SDX330D have the My Connection link to the XP2. There will not be an upgrade available for the previous models to have this feature.*
*Send Designs to and from SDX325 to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.
For the crafting hobbyist who loves fabric, the ScanNCut DX SDX325 is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.
With 1303 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX325 can provide endless creativity. The stand-alone SDX325 has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.
With the Thin Fabric Auto Blade, you can cut fabric for quilting and raw edge applique purposes so you can quilt with ease and save time by cutting multiple pieces for your projects. Combine your love of fabric and crafting into one with the SDX325
PLUS, OVER $720 IN ADDED VALUE!
• Thin Fabric Auto Blade and Holder $43.98 MSRP
• Erasable Pen Set (2 pcs) $14.99 MSRP
• Fabric Mat 12" x 12" $39.99 MSRP
• Iron-on Fabric Appliqué Contact Sheets (2 pcs) $14.99 MSRP
• Built-in One Point Designs 1,163 ($575.19 Value)
• Built-in Quilt Designs 140 ($39.60 Value)
* Synchrony Bank Sewing & More Card, Fixed Monthly Payments, 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval, then Checkout Online Purchases
Cutting fabric is easy! For the crafting hobbyist who loves fabric, the SDX325 is the perfect addition to any sewing studio or craft room. Create beautiful projects with the ScanNCut DX Innovis Edition Fabric Bundle! The ScanNCut DX is the only cutting machine on the market with true blade sensing technology and a built-in scanner! The blade sensing technology allows you to cut materials up to 3 MM in thickness‡ without adjusting your blade pressure settings and the built-in scanner adds an extra element to your creativity. Scan in fabric and easily cut out applique with the direct cut function or turn a hand made drawing into a sticker the creativity is endless with the ScanNCut DX line up! The ScanNCut DX Innovis Edition is the only ScanNCut DX that can read PES/PHX files!‡ Pull embroidery files from your XP2 or Luminaire to create drawings, foiling accents and embossing projects!
Click here for more information on the Brother SDX325F (.pdf)
This is the perfect companion for the Stellaire or Luminaire!
Features:
BLADE SENSOR TECHNOLOGY
• Auto Blade detects the thickness of material
CUTS UP TO 0.1˝ (3 MM) THICKNESS
• Cut materials such as foam and felt effortlessly with Auto Blade‡
WIRELESS LAN WITH MY CONNECTION
• The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the 'My Connection' tile.
STAND-ALONE (NO PC REQUIRED)
• 5" LCD touchscreen display for easy editing of cut data
ADVANCED EDITING WITH CANVASWORKSPACE
• Create, edit, convert, and send cut data to and from the machine PES/PHC/PHX FILE READABILITYˆ
• Convert PES/PHC/PHX embroidery fi les to cut data directly
on the machine^
• Use most PES/PHC/PHX embroidery fi les for drawing, embossingˇ and foilingˇ data
BUILT-IN SCANNER (900 DPI)
• Scan in fabric so you can easily turn creative handmade drawings into your next fun project.
*Matless Cutting – Roll Feeder Attachment
**Optional Accessory Available
Built-In Designs:
- 1,303 built-in designs
- Including 140 quilt patterns
- Including 17 lettering fonts
My Connection Feature
Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
- 5" LCD Touch Screen Display
- Storage Compartments
- Up to 600 DPI (Scan to USB Function)
- Accommodates 12" x 12" and 12" x 24" cutting mats, plus 12" x 12" and 12" x 24" scanning mats
- 11.7" Width Scanning Area / 11.7" Width Cutting Area
- Cuts up to 3mm thick‡
- Wireless LAN with My Connection
- File Formats Supported: PHX, PES, SVG
Material Compatibility: Printer Paper, Scrapbook, Cardstock, Tracing Paper, Velum, Poster Board, Thin Cotton, Felt, Flannel, Magnet, Sticker, Seal
Work Area: 12" x 12"
Version 1.51 Software Update Now Available for the ScanNCut DX Series and Version 2.4.0 CanvasWorkspace for All ScanNCut Series Electronic Cutting Machines
We would like to inform you we have released a software update version 1.51 for the ScanNCut DX Series of Electronic Cutting Machines on Brother Solutions Center. Updating your ScanNCut DX with this software will give you access to a weeding box function, additional size settings in the editing screen, and ability to use "My Collection" with optional Pattern Collections.
Version 2.4.0 of the CanvasWorkspace(Win/Mac) will enhance your experience in this PC application.
The software update provides the following:
- Updated menu for transferring FCM files
- Addition of File Preview (only for macOS® 10.15 or later)
- Improved editing settings for Enhanced Image Tracing Function* (only available for macOS®).
- Enhanced weeding box function*
- Additional Function such as Tiling*
*This is an optional accessory, sold separately. Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
We would like to inform you we have released a software update for SDX325 and SDX330D on Brother Solutions Center. "My Connection" function (sending and retrieving data between the cutting machine and embroidery machine) has been added. For the detail of the function, refer to "My Connection" Operation Manual.
Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
Brother SDX330D Disney Scan N Cut, WiFi for XP1-3-+1485 Designs, 182 Disney, 17 Fonts +Rotary Blade Kit
 Brother SDX330D Disney ScanNCut, WiFi Wireless +Roll Bag +Rotary Auto Blade Kit, 1485Designs, 182Disney & Applique Designs, 140Quilt Patterns, 17Fonts |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: Retail |
Features
Brother 2024 Gift Guide Rebate Form
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech
*Send Designs to and from SDX330D to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.
For the crafting hobbyist who loves fabric, the ScanNCut DX SDX330D is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.
With over 1485 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX330D can provide endless creativity. The stand-alone SDX330D has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores
"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech
Bring a touch of Disney to your crafting with the Limited Edition Disney ScanNCut DX Innov-ís Edition.
The latest in the evolution of the successful ScanNCut line comes in the form of the Limited-Edition Disney ScanNCut DX Innov-ís SDX330D, also now known as your Disney electronic cutting machine. The SDX330D has 132 built-in Disney designs, along with 140 quilt patterns, 17 lettering fonts, and endless creative possibilities. The SDX330D features revolutionary Blade Sensor technology, which can cut materials such as felt and foam, up to 3MM thick. Use the SDX330D to scan and cut virtually any materials up to 3mm thick so you can make personalized apparel, fun quilts, dazzling home décor, and customized artwork designs. The SDX330D has all the innovative features and trusted Brother reliability for today's creative hobbyists, budding entrepreneurs, and Disney fans.
- BLADE SENSOR TECHNOLOGY WITH AUTO BLADE
Auto Blade detects the thickness of material
Cut materials such as foam and felt effortlessly with Auto Blade
The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the ‘My Connection’ tile.
5" LCD touchscreen display for easy editing of cut data
Seamlessly scan hand-drawn designs and sketches
Convert PES/PHC/PHX embroidery files to cut data directly on the machine
Use most PES/PHC/PHX embroidery files for drawing, embossingˇ and foilingˇ data
New For 2022: Introducing the NEW ScanNCut Innov-ís Edition DX SDX330D | Brother Crafts USA
Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
Everyone please save this link, it is another indebth tutorial on Luminaire ScanNCut transferring
Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
Extended US Warranty: 5 years motor, 3 years parts, Lifetime belt, 1 year labor
Non-US Warranty: 30 days parts and labor.
Specifications
DimensionsCarton Dimensions (W" x D" x H") 11.75" x 24.4" x 11.5"
Carton Weight (lbs) 18.6
Unit Weight (lbs) 12.79
General
Built-In Designs 1485
Built-In Fonts 17
Built-In Disney Designs 182
Built-In Quilt Patterns 140
Artspira information from Brother USA
Scanning
- UP TO 900 DPI FOR THE SCAN TO USB FUNCTION
Turn your scanned images into unique one-of-a-kind cut designs and patterns
182 Disney designs, 140 quilt patterns, and 17 lettering fonts.
Create, edit, convert, and send cut data to and from the machine
Ample storage for blades, touch pen, and other tools, right inside the front cover! Plus, the storage area can be used as a wide-flat work surface for securing materials to the mat
Utilize the My Connection tile to send/retrieve designs between the ScanNCut DX and the Brother XP sewing machine
Cuts faster than previous ScanNCut models.**
Version 1.85 Software Update Now Available for the ScanNCut DX Series and Version 2.4.0 CanvasWorkspace for All ScanNCut Series Electronic Cutting Machines
We would like to inform you we have released a software update version 1.85 for the ScanNCut DX Series of Electronic Cutting Machines on Brother Solutions Center. Updating your ScanNCut DX with this software will give you access to a weeding box function, additional size settings in the editing screen, and ability to use "My Collection" with optional Pattern Collections.
Version 2.4.0 of the CanvasWorkspace(Win/Mac) will enhance your experience in this PC application. The software update provides the below:
Updated menu for transferring FCM files
Addition of File Preview (only for macOS® 10.15 or later)
Improved editing settings for Enhanced Image Tracing Function* (only available for macOS®).
Enhanced weeding box function*
Additional Function such as Tiling*
*This is an optional accessory, sold separately. Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
We would like to inform you we have released a software update for SDX325 and SDX330D on Brother Solutions Center. "My Connection" function (sending and retrieving data between the cutting machine and embroidery machine) has been added. For the detail of the function, refer to "My Connection" Operation Manual.
Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
Brother DX SDX85M ScanNCut Electronic Cutting System with 251 Built-In Designs, True Auto Blade and Built-In Scanner, Maui Color
 Brother SDX85M ScanNCut Electronic Cutting System with 251 Built-In Designs, True Auto Blade and Built-In Scanner - Maui |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
In Stock! Make ‘The’ Moment with ScanNCut DX!
*Only the new SDX325 and SDX330D have the My. Connection link to the XP2. There will not be an upgrade available for the previous or other DX models to have this feature.*
Introducing the new ScanNCut DX (SDX85M), the only affordable and versatile cutting machine with a built-in scanner for making all of life's moments stand out. It's so easy to use, with features like Blade Sensor Technology (that automatically adjusts for material thickness) and more than 250 built-in designs, patterns and fonts to get your creative juices flowing. PLUS advanced editing with CanvasWorkspace to help showcase your advancing skills.
Make the moment with the cutting machine for Moment Makers: the new ScanNCut DX.
Main Features:
*Only the new SDX325 and SDX330D have the My. Connection link to the XP2. There will not be an upgrade available for the previous or other DX models to have this feature.*
Introducing the new ScanNCut DX (SDX85M), the only affordable and versatile cutting machine with a built-in scanner for making all of life's moments stand out. It's so easy to use, with features like Blade Sensor Technology (that automatically adjusts for material thickness) and more than 250 built-in designs, patterns and fonts to get your creative juices flowing. PLUS advanced editing with CanvasWorkspace to help showcase your advancing skills.
Make the moment with the cutting machine for Moment Makers: the new ScanNCut DX.
Main Features:
-
Blade Sensor Technology: Auto blade detects the thickness of material, no blade adjustment or material selection required.
-
Cut Up To 0.1” (3 mm) in Thickness: The Brother Home Electronic Cutting Machine effortlessly cuts materials‡ such as foam and felt with the Auto Blade.
-
Stand-Alone: Create a project right out of the box without using a computer or mobile device.
-
Fully Detailed Designs: Features a total of 251 built-in designs!
-
Wireless Network Ready: Wirelessly connect‡ your PC or mobile device to transfer cut data from the Brother CanvasWorkspace application.
-
Advanced editing with Canvasworkspace
Extended US Warranty: 1 Year Limited Parts & Labor, 2 Year Limited Electronic Components and Printed Circuit Boards
Non-US Warranty: 30 days parts and labor.
Specifications
SDX85MScanNCut DX - Maui
251 Built-In Designs
True Auto Blade, no manually adjusting blade pressure settings.
Built-In Scanner; scan in hand-drawn creations and cut them out!
- Blade Sensor Technology
- Wireless Network Ready
- Wireless Connection via PC/Tablet/Mobile4
- CanvasWorkspace PC-Based Application
- Direct Data Transfer via USB Cable on CanvasWorkspace5
- Maximum Object Readability: 600
- Total Built-in Designs: 251 Designs/5 Fonts
Brother SDX330D DEMO Disney ScanNCut, WiFi for XP, Rotary Blade Kit, 1485 Designs, 182 Disney, 17 Fonts +Bonus CADXTOTEG Rolling Bag Set Grey
Brother SDX330D Disney ScanNCut, WiFi Wireless +Roll Bag +Rotary Auto Blade Kit, 1485Designs, 182Disney & Applique Designs, 140Quilt Patterns, 17Fonts |
Availability: Retail Store Only Condition: Floor Model |
Features
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech
*Send Designs to and from SDX330D to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.
For the crafting hobbyist who loves fabric, the ScanNCut DX SDX330D is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.
With over 1485 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX330D can provide endless creativity. The stand-alone SDX330D has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores
"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech
Bring a touch of Disney to your crafting with the Limited Edition Disney ScanNCut DX Innov-ís Edition.
The latest in the evolution of the successful ScanNCut line comes in the form of the Limited-Edition Disney ScanNCut DX Innov-ís SDX330D, also now known as your Disney electronic cutting machine. The SDX330D has 132 built-in Disney designs, along with 140 quilt patterns, 17 lettering fonts, and endless creative possibilities. The SDX330D features revolutionary Blade Sensor technology, which can cut materials such as felt and foam, up to 3MM thick. Use the SDX330D to scan and cut virtually any materials up to 3mm thick so you can make personalized apparel, fun quilts, dazzling home décor, and customized artwork designs. The SDX330D has all the innovative features and trusted Brother reliability for today's creative hobbyists, budding entrepreneurs, and Disney fans.
- BLADE SENSOR TECHNOLOGY WITH AUTO BLADE
Auto Blade detects the thickness of material
Cut materials such as foam and felt effortlessly with Auto Blade
The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the ‘My Connection’ tile.
5" LCD touchscreen display for easy editing of cut data
Seamlessly scan hand-drawn designs and sketches
Convert PES/PHC/PHX embroidery files to cut data directly on the machine
Use most PES/PHC/PHX embroidery files for drawing, embossingˇ and foilingˇ data
New For 2022: Introducing the NEW ScanNCut Innov-ís Edition DX SDX330D | Brother Crafts USA
Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
Everyone please save this link, it is another indebth tutorial on Luminaire ScanNCut transferring
Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
Extended US Warranty: 5 years motor, 3 years parts, Lifetime belt, 1 year labor
Non-US Warranty: 30 days parts and labor.
Specifications
DimensionsCarton Dimensions (W" x D" x H") 11.75" x 24.4" x 11.5"
Carton Weight (lbs) 18.6
Unit Weight (lbs) 12.79
General
Built-In Designs 1485
Built-In Fonts 17
Built-In Disney Designs 182
Built-In Quilt Patterns 140
Scanning
- UP TO 900 DPI FOR THE SCAN TO USB FUNCTION
Turn your scanned images into unique one-of-a-kind cut designs and patterns
182 Disney designs, 140 quilt patterns, and 17 lettering fonts.
Create, edit, convert, and send cut data to and from the machine
Ample storage for blades, touch pen, and other tools, right inside the front cover! Plus, the storage area can be used as a wide-flat work surface for securing materials to the mat
Utilize the My Connection tile to send/retrieve designs between the ScanNCut DX and the Brother XP sewing machine
Cuts faster than previous ScanNCut models.**
Version 1.51 Software Update Now Available for the ScanNCut DX Series and Version 2.4.0 CanvasWorkspace for All ScanNCut Series Electronic Cutting Machines
We would like to inform you we have released a software update version 1.51 for the ScanNCut DX Series of Electronic Cutting Machines on Brother Solutions Center. Updating your ScanNCut DX with this software will give you access to a weeding box function, additional size settings in the editing screen, and ability to use "My Collection" with optional Pattern Collections.
Version 2.4.0 of the CanvasWorkspace(Win/Mac) will enhance your experience in this PC application. The software update provides the below:
Updated menu for transferring FCM files
Addition of File Preview (only for macOS® 10.15 or later)
Improved editing settings for Enhanced Image Tracing Function* (only available for macOS®).
Enhanced weeding box function*
Additional Function such as Tiling*
*This is an optional accessory, sold separately. Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
We would like to inform you we have released a software update for SDX325 and SDX330D on Brother Solutions Center. "My Connection" function (sending and retrieving data between the cutting machine and embroidery machine) has been added. For the detail of the function, refer to "My Connection" Operation Manual.
Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
Brother HADSNCDXPROJBK ScanNCut DX and SDX 10 Project Booklet, 14 Pages
 94098: Brother HADSNCDXPROJBK ScanNCut DX Project Booklet |
Our Price: $14.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
14 Page Printed Booklet contains project ideas and instructions for the ScanNCut DX Machine.
Project 1: Woven Basket
Project 2: Christmas Scene
Project 3: Wall Decoration
Project 4: Photo Frame
Project 5: Mask
Project 6: Tattered Lace Box
Project 7: Garland Banner
Project 8: Flower Wreath
Project 9: Stained Glass Mobile
Project 10: House Clock Model
Older 2014 Project Ideas and Instructions for Brother ScanNCut - Out of Print(.PDF)
Project 1: Woven Basket
Project 2: Christmas Scene
Project 3: Wall Decoration
Project 4: Photo Frame
Project 5: Mask
Project 6: Tattered Lace Box
Project 7: Garland Banner
Project 8: Flower Wreath
Project 9: Stained Glass Mobile
Project 10: House Clock Model
Older 2014 Project Ideas and Instructions for Brother ScanNCut - Out of Print(.PDF)
Non-US Warranty: 30 days parts and labor.
DO NOT TURN ON PAGE, FOR INVENTORY ONLY Janome JA000036921 Extended Adapter Platform Set A+D 8.5x24", Ebosser
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
(Note: It cannot be used with ALL the Accuquilt strip cut dies, as they are 10x24". Its for the longer dies, but the ones that are wider than 8.5” will not fit.)
eBosser 24" Platform
We are excited to introduce to you the 24 inch eBosser platforms. Each eBosser comes standard with the 12 inch platforms, however in order to be able to use the longer Accuquilt dies, such as the strip dies, the consumer will need the 24 inch platforms. This package of platforms consists of platform A (the thicker bottom platform) and platform D (the thin clear platform that you put onto position the fabric and the die).
Part # - EBOSSPLAT
eBosser 24" Platform
We are excited to introduce to you the 24 inch eBosser platforms. Each eBosser comes standard with the 12 inch platforms, however in order to be able to use the longer Accuquilt dies, such as the strip dies, the consumer will need the 24 inch platforms. This package of platforms consists of platform A (the thicker bottom platform) and platform D (the thin clear platform that you put onto position the fabric and the die).
Part # - EBOSSPLAT
Non-US Warranty: 30 days parts and labor.
SLICE 36493 Design Card, Animal Frenzy
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Design Card The Slice Fabrique
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Slice Fabrique 38014 Digital Cutter Starter Kit, Applique Basics SD Design Card, Cut Alphabets, Numbers, Flowers, Basic Shapes, 6x6" Fusible, Applique
 |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Limited Stock Condition: New In Box |
Features
Package includes: Slice Digital Fabric Cutter, power cord, 3 replacement blades, blade adjustment wrench, 6" x 6" fusible web sheets, user manual, quick start guide, Applique Basics Design Card, Design Guide Booklet. We are unable to reorder the blades. Each Unit comes with 3 replacement blades in the box.
Slice Cutter, Power Cord, 3 Blades, Adjustment Wrench, 6x6" Grided Glass Mat, Fusible Web Sheets, User Manual, Quick Start Guide, Applique Basics SD Design Card & Booklet
It's time to get creative! This cordless digital shape cutter cuts fabric; paper; vinyl; and more! This package includes one 5-1/2x5-1/2x4 inch Slice Digital Shape Cutter; one power cord; three replacement blades; one blade adjustment wrench; one 6x6 inch cutting mat; one repositionable adhesive foam brush; three 6x6 inch fusible web sheets; a user manual and quick start guide; an Applique Basics SD design card; and a design card booklet.
The SLICE™ is a revolutionary fabric-cutting tool that makes quilting easier.
Don’t spend hours cutting intricate designs with scissors when you can save time by allowing the SLICE™ to do all the work for you. The SLICE™ works with design cards specifically customized for fabric so you can cut alphabets, numbers, flowers, icons, basic shapes, and more.
Apply a fusible web to your cotton fabric, felt or flannel and you are ready to start Slicing. If you can imagine it, you can SLICE™ it.
The SLICE™ is unlike anything you have ever seen. It’s a one-of-a-kind tool that fits within everybody’s budget. Save time and money while creating projects that will last a lifetime.
The Slice (tm) is a revolutionary fabric-cutting tool that makes quilting easier. Don’t spend hours cutting intricate designs with scissors when you can save time by allowing the Slice to do all the work for you. The Slice works with design cards specifically customized for fabric so you can cut alphabets, numbers, flowers, icons, basic shapes, and more. Package includes; Slice (tm) Cutter, power cord, 3 replacement blades, blade adjustment wrench, 6" x 6" fusible web sheets, user manual, quick start guide, Applique Basics SD design card and design card booklet.
Slice Cutter, Power Cord, 3 Blades, Adjustment Wrench, 6x6" Grided Glass Mat, Fusible Web Sheets, User Manual, Quick Start Guide, Applique Basics SD Design Card & Booklet
It's time to get creative! This cordless digital shape cutter cuts fabric; paper; vinyl; and more! This package includes one 5-1/2x5-1/2x4 inch Slice Digital Shape Cutter; one power cord; three replacement blades; one blade adjustment wrench; one 6x6 inch cutting mat; one repositionable adhesive foam brush; three 6x6 inch fusible web sheets; a user manual and quick start guide; an Applique Basics SD design card; and a design card booklet.
The SLICE™ is a revolutionary fabric-cutting tool that makes quilting easier.
Don’t spend hours cutting intricate designs with scissors when you can save time by allowing the SLICE™ to do all the work for you. The SLICE™ works with design cards specifically customized for fabric so you can cut alphabets, numbers, flowers, icons, basic shapes, and more.
Apply a fusible web to your cotton fabric, felt or flannel and you are ready to start Slicing. If you can imagine it, you can SLICE™ it.
The SLICE™ is unlike anything you have ever seen. It’s a one-of-a-kind tool that fits within everybody’s budget. Save time and money while creating projects that will last a lifetime.
The Slice (tm) is a revolutionary fabric-cutting tool that makes quilting easier. Don’t spend hours cutting intricate designs with scissors when you can save time by allowing the Slice to do all the work for you. The Slice works with design cards specifically customized for fabric so you can cut alphabets, numbers, flowers, icons, basic shapes, and more. Package includes; Slice (tm) Cutter, power cord, 3 replacement blades, blade adjustment wrench, 6" x 6" fusible web sheets, user manual, quick start guide, Applique Basics SD design card and design card booklet.
Non-US Warranty: 30 days parts and labor.
Specifications
(1) Slice Fabriqu Digital Fabric Cutter, (1) power cord, (3) replacement blades, (1) blade adjustment wrench, (1) 6" x 6" glass cutting mat, repositionable adhesive, (1) foam brush, (3) 6" x 6" fusible web sheets, (1) user manual, (1) quick start guide, (1) Applique Basics SD Design Card, (1) Design Guide BookletSilhouette Printable Adhesive Foil 8.5"X11" 8/Pkg
 |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Use this printable gold foil with the Silhouette print and cut feature to make custom labels and stickers from your favorite designs. Contents: Eight 8.5 in x 11 in sheets printable gold foil.
SILHOUETTE OF AMERICA-Printable Gold Foil. Print text and designs on these sheets of gold foil and use your Silhouette (not included) to cut them out. This package contains eight 8-1/2x11 inch adhesive sheets. Imported.
SILHOUETTE OF AMERICA-Printable Gold Foil. Print text and designs on these sheets of gold foil and use your Silhouette (not included) to cut them out. This package contains eight 8-1/2x11 inch adhesive sheets. Imported.
Non-US Warranty: 30 days parts and labor.
Silhouette CAMEO 4 Electronic Cutting Machine, 12in Wide, Vinyl HTV Roll Feeder, Crosscutter, 3mm Deep, Bluetooth, MacWindows, Software, PixScan Ready
 98862: Silhouette CAMEO 4 Electronic Cutting Machine, 12in Wide, Vinyl HTV Roll Feeder, Crosscutter, 3mm Deep, Bluetooth, MacWindows, Software, PixScan Ready |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
On Clearance
With more speed and power than any other Silhouette machine, the Cameo 4 is a desktop cutting machine for the modern maker. With certain materials you can now choose to cut from a mat or go completely matless using Cameo 4’s smart cutting technology. You can also cut directly from a roll using the built-in roll feeder and crosscutter. Cut or sketch on dozens of materials such as vinyl, cardstock, fabric, and more.
Precision DIY Cutting
The Cameo 4 series allows you to create DIY projects with incredible precision. From cutting out fabric patterns, to creating custom stickers, the Silhouette Cameo is the modern maker's best friend.
Fastest in its Class
Your time is valuable. That's why the Cameo 4 series cuts jobs up to 3 times faster than previous models.
No Mat? No Problem
With its kiss-cut action for rolled materials, or its pop-out cutting feature for paper and cardstock, the Cameo 4 series gives you the freedom to cut various material types without using a cutting mat.
Automatic Tool Detection
Tool Detection simplifies your experience by automatically detecting which tool you've put in the machine and instantly adjusting your software settings.
The Perfect Vinyl-Cutting Machine
Cut rolled materials with ease using the built-in roll feeder, which allows for projects up to 10 feet in length.
Explore the Material World
Cut more materials than ever before with the Cameo 4 series. You can now easily cut vinyl, cardstock, crepe paper, foam, fabric, chipboard, leather, and more!
More Power. More Possibilities.
The Cameo 4 series offers the impressive ability to apply up to 5,000 gf means you can cut felt, fabric, and other specialty materials with ease using our Rotary Blade.
Wireless Bluetooth® Connectivity
Connect your Silhouette machine to your device wirelessly using built-in Bluetooth® technology.
Print & Cut
Create custom Print & Cut projects with your home printer, and use your Silhouette to cut them out. You can make custom stickers, printed heat transfer decals, temporary tattoos and more!
Maximize Your Creativity
The Cameo 4 provides a true 12-inch cutting width and a 3 mm clearance to help bring your ideas to life.
Dual Carriage
Cut or sketch using a variety of available tools with the Cameo 4 series' dual carriage system. Carriage 1 is for standard cutting with the included AutoBlade. Carriage 2 provides more power for use with specialty tools, such as the Rotary Blade or Punch Tool.
Backed by Silhouette Studio®
All Silhouette machines use the powerful Silhouette Studio® software, which allows you to tap into our expansive collection of Silhouette Design Store content, import your own fonts and images, or create designs from scratch. You can also unlock even more power and features through additional software upgrades.
Features of the Silhouette Cameo 4
Introduction to the Silhouette Cameo® 4
With more speed and power than any other Silhouette machine, the Cameo 4 is a desktop cutting machine for the modern maker. With certain materials you can now choose to cut from a mat or go completely matless using Cameo 4’s smart cutting technology. You can also cut directly from a roll using the built-in roll feeder and crosscutter. Cut or sketch on dozens of materials such as vinyl, cardstock, fabric, and more.
Precision DIY Cutting
The Cameo 4 series allows you to create DIY projects with incredible precision. From cutting out fabric patterns, to creating custom stickers, the Silhouette Cameo is the modern maker's best friend.
Fastest in its Class
Your time is valuable. That's why the Cameo 4 series cuts jobs up to 3 times faster than previous models.
No Mat? No Problem
With its kiss-cut action for rolled materials, or its pop-out cutting feature for paper and cardstock, the Cameo 4 series gives you the freedom to cut various material types without using a cutting mat.
Automatic Tool Detection
Tool Detection simplifies your experience by automatically detecting which tool you've put in the machine and instantly adjusting your software settings.
The Perfect Vinyl-Cutting Machine
Cut rolled materials with ease using the built-in roll feeder, which allows for projects up to 10 feet in length.
Explore the Material World
Cut more materials than ever before with the Cameo 4 series. You can now easily cut vinyl, cardstock, crepe paper, foam, fabric, chipboard, leather, and more!
More Power. More Possibilities.
The Cameo 4 series offers the impressive ability to apply up to 5,000 gf means you can cut felt, fabric, and other specialty materials with ease using our Rotary Blade.
Wireless Bluetooth® Connectivity
Connect your Silhouette machine to your device wirelessly using built-in Bluetooth® technology.
Print & Cut
Create custom Print & Cut projects with your home printer, and use your Silhouette to cut them out. You can make custom stickers, printed heat transfer decals, temporary tattoos and more!
Maximize Your Creativity
The Cameo 4 provides a true 12-inch cutting width and a 3 mm clearance to help bring your ideas to life.
Dual Carriage
Cut or sketch using a variety of available tools with the Cameo 4 series' dual carriage system. Carriage 1 is for standard cutting with the included AutoBlade. Carriage 2 provides more power for use with specialty tools, such as the Rotary Blade or Punch Tool.
Backed by Silhouette Studio®
All Silhouette machines use the powerful Silhouette Studio® software, which allows you to tap into our expansive collection of Silhouette Design Store content, import your own fonts and images, or create designs from scratch. You can also unlock even more power and features through additional software upgrades.
Features of the Silhouette Cameo 4
Introduction to the Silhouette Cameo® 4
Non-US Warranty: 30 days parts and labor.
Specifications
The Cameo 4 is a 12-inch width desktop cutting machine that lets you make precision cuts in vinyl, cardstock, fabric, and more.Machine features include:
- True 12-inch cutting width (when using cutting mat)
- Matless cutting capabilities
- Cut up to 10 feet length materials (when using select materials)
- Dual motor system
- Tool detection sensors
- Most powerful force in machine class (5,000 grams force)
- Fastest cutting speed in machine class (up to 30 cm/second)
- Smart tangential mode for cutting fabric without a stabilizer (requires Rotary Blade)
- 3 mm clearance for thicker materials.
- Feather touch responsive panel
- Built-in roll feeder allows you to easily load and cut rolled materials like vinyl and heat transfer.
- Built-in crosscutter lets you trim vinyl or heat transfer right from the roll.
- Sliding lid and backlit touch panel give your machine a sleek, compact aesthetic.
- Bluetooth® connectivity allows wireless cutting.
- Print & Cut registration capability
- PixScan™ compatible
- Driven by free Silhouette Studio® software to give you limitless design options to customize your project.
- Mac/Windows compatible
Technical Specifications
- Cutting Area: 12 in. x 24 in. with a cutting mat, 12 in. x 10 ft. with lined media
- Matless cutting options available depending on material type. Materials with liners or backing, such as vinyl, heat transfer, and sticker sheets can be fed directly into the Cameo 4 without a cutting mat. The Cameo 4 also offers a special "Pop-out" cutting feature for paper and cardstock materials where a cutting mat is not required.
- Maximum Media Thickness: 3 mm (118.11 mils)
- Maximum Cutting Force:
-Carriage 1: 210 gf
-Carriage 2: 5 kgf (highest in machine class)
- Interface: USB 2.0 high speed / Bluetooth®
- Unit Dimensions: 22.44 in. x 7.68 in. x 6.69 in. (57 cm x 19.5 cm x 17 cm)
- Unit Weight: 10 lbs 6.4 oz (4.7 kg)
- Shipping Dimensions: 25.2 in. x 11.34 in. x 8.78 in. (64 cm x 27.6 cm x 23.4 cm)
- Shipping Weight: 13 lbs 11.2 oz (6.2 kg)
- Warranty: One year parts and labor (Limited to USA and Canada only)
- Requires Silhouette Studio® software version 4.3.341 or higher
- Minimum System Requirements: Windows 8.1 or higher or Mac OS X 10.10 or higher, 2 GHz processor, 4 GB RAM, 2 GB available disk space, USB port, High speed internet connection (recommended)
* Matless cutting options available depending on material type. Materials with liners or backing, such as vinyl, heat transfer, and sticker sheets can be fed directly into the Cameo 4 without a cutting mat. Cameo 4 also offers a special "Pop-out" cutting feature for paper and cardstock materials where a cutting mat is not required.
Contains:
Silhouette Cameo® 4
12-inch cutting mat
AutoBlade
Silhouette Studio® software (digital download)
100 exclusive designs (digital download)
1-month Silhouette Design Store subscription (available with tool registration)
Adapters for standard blade, premium blade, deep-cut blade, 2mm Kraft Blade, and Silhouette sketch pens
Basic instruction guide (digital download)
Power cable & USB cable
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.