December 21, 2024

Naomoto Irons

Naomoto Corporation, Osaka, Japan Naomoto Corp was founded in 1948 and started with the design and manufacture of novel lightweight industrial hand irons. Since then, Naomoto brand has become recognized worldwide for innovation and the highest quality ironing and finishing products for the apparel manufacturing, laundry, and dry cleaning industies. The company has diversified into the food, housing and beauty industries, with steam application being the core of its products.

Click HERE for Catalog of Naomoto Irons, Vacuum Boards, and Equipment from Osaka, Japan

Naomoto Factory Serviced AHS-500 Ecovalore Electric Steam Iron Only, 110V, 840W, 3.5Lbs, Tuffram Soleplate, for Your Boiler

Naomoto AHS-500 Ecovalore Electric Steam Iron, 110V, 840W, 3.5Lbs, Tuffram Soleplate
Our Price: $1,299.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 3-4 business days.
Condition: Factory Serviced

Features

Special Features:
Newly developed electrically heated steam hose that prevents condensation
Instant stop/start heating
Light-Touch Microswitch
Seperate, lighter weight and precise temperature control that displays temperature digitally on an LCD panel
Adujustable temperature even during ironing
No condensation even at 120 degrees Celcius
Suitable for heat-sensitive materials


Specifications:
Voltage: 220v/110v
Electric Consumption: 840w
Iron Base Dimension: 205x116mm
Weight: 1.6kg
Iron Base: Tuffram Coating


Benefits:
Flexibility
Allows for a safer, more comfortable working enviorment due to reduced temperature
Reduces energy consumption and CO2 emissions
Non-US Warranty: 30 days parts and labor.

Specifications

*Electrical Heated Steam Hose with solenoid valve
*Light Touch for Steaming
*Lighter Weight & Precise temperature control
*No condensation even at low temperature

Main features:

Cut the waste steam and cut the electricity bill
Compared to traditional methods, efficient use of steam to the next level.
Cut the waste steam are of course directly to monthly electricity bill savings. The effect is quite obvious if you look at the chart.
Excellent responsiveness
Newly developed warm hose with built-in heaters to send the steam hose.
In preventing low-temperature steam through a hose when
Matically responsiveness. Also, compared to conventional order can be injected when necessary amount of steam always had been circulating steam
The amount of steam no waste.

Less fatigue:
Women who are even easier just press lightly with your thumb, that steaming is OK.
Less fatigue when working long hours does not worry about such as Tendonitis.
In addition to warm hose, valve performance is also improved
Press the switch at almost no time difference, the jets of steam. Drain well was eliminated.

Weight reduction:
Thermostat was attached to the back of the body to another place by weight of iron body.
To the LCD Panel, and set the temperature currently temperature digital and readable displays.
For the separate thermostat is always in sight, while manipulating iron fine temperature adjustment can be smoothly.

OK drain is no delicate fibers:
Iron base temperature is 120 ° c to 210 ° c available.
So does not raise the drain by adopting newly developed warm horse iron base temperature down to 120 ° c
Heat your very sensitive high-tech fiber.

Pro makes sense:. Choose with ease-of-use are ナオモト iron.
From no previous support grip, easier to see ironing tips
Even small parts such as cuffs, collar, pockets can be finished smoothly
Materials adopted urethane slip, and heat is confusing.
It is easy to hold handle with curve and fit nicely in the hand.
Cut the heat emitted by iron body firmly. Because the hand is not hot
Even long-running iron can be comfortable.

Naomoto AHS-500 Ecovalore Electric Steam Iron Only, 110V, 840W, 3.5Lbs, Tuffram Soleplate, for Your Boiler

Naomoto AHS-500 Ecovalore Electric Steam Iron, 110V, 840W, 3.5Lbs, Tuffram Soleplate
Our Price: $1,699.99
Prices are subject to change, and only current prices will be honored.

Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

Special Order Item, Please allow 3-4 weeks before shipping
Out of stock until Mid-March

Special Features:
Newly developed electrically heated steam hose that prevents condensation
Instant stop/start heating
Light-Touch Microswitch
Seperate, lighter weight and precise temperature control that displays temperature digitally on an LCD panel
Adujustable temperature even during ironing
No condensation even at 120 degrees Celcius
Suitable for heat-sensitive materials


Specifications:
Voltage: 220v/110v
Electric Consumption: 840w
Iron Base Dimension: 205x116mm
Weight: 1.6kg
Iron Base: Tuffram Coating


Benefits:
Flexibility
Allows for a safer, more comfortable working enviorment due to reduced temperature
Reduces energy consumption and CO2 emissions
Non-US Warranty: 30 days parts and labor.

Specifications

*Electrical Heated Steam Hose with solenoid valve
*Light Touch for Steaming
*Lighter Weight & Precise temperature control
*No condensation even at low temperature

Main features:

Cut the waste steam and cut the electricity bill
Compared to traditional methods, efficient use of steam to the next level.
Cut the waste steam are of course directly to monthly electricity bill savings. The effect is quite obvious if you look at the chart.
Excellent responsiveness
Newly developed warm hose with built-in heaters to send the steam hose.
In preventing low-temperature steam through a hose when
Matically responsiveness. Also, compared to conventional order can be injected when necessary amount of steam always had been circulating steam
The amount of steam no waste.

Less fatigue:
Women who are even easier just press lightly with your thumb, that steaming is OK.
Less fatigue when working long hours does not worry about such as Tendonitis.
In addition to warm hose, valve performance is also improved
Press the switch at almost no time difference, the jets of steam. Drain well was eliminated.

Weight reduction:
Thermostat was attached to the back of the body to another place by weight of iron body.
To the LCD Panel, and set the temperature currently temperature digital and readable displays.
For the separate thermostat is always in sight, while manipulating iron fine temperature adjustment can be smoothly.

OK drain is no delicate fibers:
Iron base temperature is 120 ° c to 210 ° c available.
So does not raise the drain by adopting newly developed warm horse iron base temperature down to 120 ° c
Heat your very sensitive high-tech fiber.

Pro makes sense:. Choose with ease-of-use are ナオモト iron.
From no previous support grip, easier to see ironing tips
Even small parts such as cuffs, collar, pockets can be finished smoothly
Materials adopted urethane slip, and heat is confusing.
It is easy to hold handle with curve and fit nicely in the hand.
Cut the heat emitted by iron body firmly. Because the hand is not hot
Even long-running iron can be comfortable.

Naomoto FB-8S Utility Vacuum Table Heated Ironing Board +FB8S Cover +Pad +Catch Tray +HYS410P Variable Steam Iron +PS1 Water Pump Steam Volume Control

Naomoto, FB-8S, Vacuum, Ironing, & Pressing, Table, Board , HYS-410P Variable Steam Pump Iron, Teflon Soleplate, Water Tank, Garment Shelf, 75Lb, 110, Naomoto FB-8S Utility Vacuum Self Contained Heated Ironing Board FB8S Cover +Pad +HYS-410P Variable Steam Iron +PS-1 Water Pump w/Steam Volume Controlp with Steam Volume Control

9894: Naomoto FB-8S Utility Vacuum Self Contained Heated Ironing Board FB8S Cover +Pad +HYS-410P Variable Steam Iron +PS-1 Water Pump w/Steam Volume Control
Our Price: $3,999.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box

Features

  • Self-contained vacuum
  • Complete with pump iron and pump assembly
  • Instant plug-in use
  • Functions vacuum while ironing
  • Vacuum foot control table
  • Weight 75 pounds or 33 kilos
  • Dimensions 1235×385×870mm

    NAOMOTO SUPER CD TECHNOLOGY, Enables the excellent ironing with wide range temperature and for any kinds of fabric.

    Even if the ironing at low temperature is required, it is possible to iron without wearing Teflon Shoe and worrying about condensation drops forever.

    Excellent steam and heat make wrinkles smoothed out in no time.

    User friendly product - Drainage and water feeding hose are combined into one hose.

    You can easily and finely adjust the steam volume by swing lever, push lever and feather touch type switch.

  • 110V 1PH or 220V 1PH

  • Handle with Steam On/Off switch and front open-end design
    Handle is made of urethane that allows sure grip. It is also de-signed to fit even in lady's hand. Open-front handle allows ease of ironing hard-to-reach places like cuffs and other tiny areas. And it also enables prompt press works.

  • Heat Protector
    This made of heat-resistant materials to protect operator's hand from the heat radiated by iron.

  • Steam volume control dial
    When ironing thicker fabrics and sweaters larger volume of steam-flow is required. By dial, you can regulate steam-flow volume freely as pressing material demands.

  • Sole plate
    Teflon coated bottom surface makes ironing works quite smooth as if sliding on fabrics, and this also prolongs its service life.

  • Thermostat temperature control dial
    NAOMOTO'S unique IC electronic thermostat is equipped on the iron. It has extremely long service-life and regulates temperature with precision of only 2 degree celcius allowance.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Self-contained model includes HYS-410P pump iron with water tank for instant plug-in use.
  • Model: FB-8S
  • Voltage: 110v or 220v
  • Iron 1000W
  • Motor output 65W
  • Pump motor 10w
  • Work area 1045x200x385mm
  • Dimensions W1235xD385xH870mm
  • The complete pump assembly includes the tank
  • Weight and dimensions for the PS-2 pump assembly only is: 13”x13”x13” 9 lbs


  • Voltage
    		•  110v/220v
  • Iron
    		•  1000W
  • Motor output
    		•  65W
  • Pump motor
    		•  10w
  • Work area
    		•  1045x200x385mm
  • Dimensions
    		•  W1235xD385xH870mm












    HYS Pump Iron

    Without any steam generator, you can easily start ironing wherever you want if only an electric power supply is available. It is suitable for Tailor shop, boutiques and also garment factory.

  • Model: HYS-410P
  • Voltage: 110V or 220V
  • Wattage: 1000W
  • Iron Base Dimension: 203x95mm
  • Weight 1.8kg
  • Iron Base
  • Tuffram Coating

Naomoto CDP–420 Electric Steam Iron Head Only for Boilers, 500W, Made in Japan

Naomoto, CDP–420, Electric Steam Iron, 500W, Volume Adj, 110C230F+ w/o PTFE Non Stick Teflon Shoe, Tuffram Sole, Drainage, Water Feed, 1 Hose, Comfort Handle, Heat Shield, 4 Lbs

28174: Naomoto CDP–420 Electric Steam Iron Head Only, 500W, Made in Japan
Our Price: $1,599.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Electric Irons available 110V or 220V.
CDP-420 iron sold complete with two-in-one hose system.

  • For under-pressing and european style final-pressing
  • Complete with two-in-one hose system.
  • NAOMOTO SUPER CD TECHNOLOGY, Enables the excellent ironing with wide range temperature and for any kinds of fabric.
  • Even if the ironing at low temperature (110℃，230゜F） is required, it is possible to iron without wearing Shoe and worrying about condensation drops forever.
  • Excellent steam and heat make wrinkles smoothed out in no time.
  • User friendly product - Drainage and water feeding hose are combined into one hose.
  • You can easily and finely adjust the steam volume by swing lever, push lever and feather touch type switch.

    2-in-1 Hose system
    A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.

    Precise temperature control
    A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control ±1.5℃(3゜F) and energy efficiency

    Tuffram finish iron sole
    A Non Stock PTFE injected Iron sole makes smooth and easy ironing with long life.

    Naomoto Standard Comfort
  • Molded Urethane Handle
  • Open End Handle
  • Heat Shield
  • Excellent Weight Balance
  • Fine Steam Volume Control
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Voltage: 120V/220V
Wattage: 500W
Machine Dimension: 204mm×94mm
Weight: 1.7kg (3.7 lbs)
Sole Finishing: Tuffram

Naomoto Japan HYS-520 Electronic Gravity Feed Iron 880W, 5Lb, Heat Shield ETA 3 to 6 months

Naomoto, HYS, 520, Electronic, Gravity, Feed, Steam, Iron, HYS520, 880W, 5, pounds, Heat, Shield, Recessed, Thumb, Switch, Rest, Water, Bottle, Demineralizer, Filter, Resin, Naomoto, Japan, HYS-520, 880W, 5Lb, Water, Bottle, Filter, Resin, Clean, Kit

2729: Naomoto Japan HYS-520 Electronic Gravity Feed Steam Iron PTFE Non Stick Soleplate
Our Price: $1,399.99
Prices are subject to change, and only current prices will be honored.

Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

Note: Recessed Thumb Switch for Steam that cannot get knocked loose like earlier models.
Heat Shield for your hands keeps them cooler than with earlier models without any barrrier.
Gravity feed irons sold complete with water bottle, cleaning kit, filter resin, and iron rest.

Naomoto HYS-520 HY-STEAM Series Gravity Feed Bottle Iron Brochure

  • 880 Watts
  • Electronic Thermostat Temperature Control
  • Electric Micro-Switch Operation
  • Water Bottle Feed Iron
  • Temperature control
  • Weighs only 5 pounds 880W
  • Complete with water bottle, filter resin - 1lb. Bag, cleaning kit, and iron rest
  • Urethane grip handle
  • Heat Shield
  • Light touch microswitch
  • Hard nickel & PTFE fiberglass sole coating

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

This is Naomoto’s top performing gravity feed iron that requires a water tank to be hung from above the iron at a minimum of 2-3 feet above the iron.

allowing a solenoid valve to release water into the iron to make steam.

It also features an electronic thermostat for temperature ranges of +/- 4° FHow to Use a Gravity Feed Iron

What is a gravity feed steam iron? from Shelley Moore, eHow.com Contributor

steam generator versus gravity-feed iron - Sewing Forum - GardenWeb.com

steam generator or gravity-feed iron on PatternReview.com

Gravity Feed Irons by NancyKsews.com

Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Naomoto Japan AE50 Electric Iron 220V Thermostat, No Steam, Tuffram Soleplate

Naomoto AE50 Electric Iron AE-50 1100W, NO STEAM, Thermostat, Tuffram Teflon Soleplate, Comfort Urethane Open End Handle, Heat Shield, 110/220V, 3Lbs
Our Price: $1,399.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Suitable for Inter-lining pressing

Smooth out the wrinkles only by the power of heat! (Steam does not come out)

Electric thermostat gives you ultra fine temperature control. You can adjust the temperature depending on the materials.

Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control ±1.5℃(3゜F) and energy efficiency

Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.

Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.

Naomoto Standard Comfort
  • Molded Urethane Handle
  • Open End Handle
  • Heat Shield
  • Excellent Weight Balance
  • Fine Steam Volume Control

    Please note 220V is NOT a standard plug for normal household use.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Voltage: 220V
Wattage: 950W
Weight: 1.3kg (2.8 lbs)
Machine Dimension: 200mm×115mm
Sole Finishing: Tuffram

Naomoto HYS-58 Gravity Feed Steam Iron Japan, Water Bottle, Demineralizer, Iron Rest, Heat Shield, Weight 5 Pounds, 880W, 80PSI

Naomoto, HYS 58, Gravity, Feed, Steam, Iron, 5, pounds, 880, Watts, 80, PSI, 5.5, Bar, Pressure, Water, Bottle, Demineralizer, Filter, Resin, Silicone, Rest, HYS58, 110V, 220V

2730: Naomoto HYS58 Gravity Feed Steam Iron with Demineralizer 5Lbs, Japan
Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Note: Optional Iron Shoe is only available at time of order due to minimum order value requirements from vendor. Naomoto Iron Shoe #2 for HYS 58 Gravity Feed Steam Iron Prevents Scorching Shinning Garments & Fabrics

The HYS-58 quickly generates its own steam using only tap water. A special filter resin prevents clogging. New Conex heat canopy deflects heat rise, keeping handle cool. Temperature control is accurate to 2 degrees. Safe for any fabric. Comes complete with water tank, filter resin, water hose and iron rest.

  • Electric Micro-Switch Operation
  • Water Bottle Feed
  • Weight 4.18 lbs. 900W
  • Complete with water bottle, filter resin - 1lb. Bag, cleaning kit, and iron rest
  • New steam chamber for easy cleaning
  • Liquid type sensor thermostat
  • Urethane grip handle
  • Heat Shield
  • Light touch microswitch
  • Tuffram sole coating
  • One piece chamber & solepate

    How to use the Naomoto Industrial Steam Iron Video

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Specially designed for use in garment factory, laundry and dry cleaners, apparel and alteration stores, boutiques, department stores, hotels, hospitals, etc.
  • Easy, precise steam volume control with micro-switch operation
  • Ergonomic design with contoured handle to fit your hand
  • Wood handle is designed to fit the human hand and has natural insulation properties for operator comfort
  • Gently beveled soleplate makes smooth, easy ironing with no marking or tracking
  • Temperature control using a liquid sensor thermostat for percision and accuracy
  • Flush temperature dial is flush with the surface of the rear plate for finger light temperature adjustments
  • Heat shield improved non-woven Nomex material protects the hand from heat up to 280 degrees Celsius
  • Excellent visibility with complete open end handle design allows the user to see the point of the iron at all times
  • Iron safely without watering at lower temperatures and pressures (20 - 80 psi, 1.5 - 5.5 bar) allows you to iron under the best conditions to prevent fabric damage
  • Extremely energy efficient
  • New hard nickel coating means smoother ironing with less resistance, ironing surface cleans easily with just a cloth, and there's no Teflon non stick shoe required!
  • Soleplate: Hard nickel
  • Electrical: 110/220 V, 880 Watts
  • Weight: 3.74 lbs to 5.5 lbs
  • HYS58 Iron head is 4.8 pounds

    Naomoto HYS-58 Manual (.pdf)

    How to Use a Gravity Feed Iron

    steam generator or gravity-feed iron on PatternReview.com

    Gravity Feed Irons by NancyKsews.com

    Cool Tool: Gravity Feed Iron in ThreadsMagazine.com

Naomoto Japan HYS410P Electric Hot Iron 800W, 110V Power Cord, and Hose with PS-2PU Pump Water Tank to Iron with Steam Volume Control

Naomoto Japan HYS410P Electric Hot Iron 800W, 110V Power Cord, and Hose with PS-2PU Pump Water Tank to Iron with Steam Volume Control

30114: Naomoto Japan HYS410P Electric Hot Iron, Power Cord, and Hose with PS-2PU Pump
Our Price: $1,649.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Without using a separate steam generator, you can easily start pump ironing with steam wherever you want if only an 110V electric power supply is available.
It is suitable for small factories, boutiques and also garment factory.
You can use the irons for professional use at home.
It is possible to iron with steam only by setting up the water tank or electric mobile water pomp.

Precise temperature control
A combination both Electronic Thermostat(N-89S/ST/W) and Heater Element gives precise temperature control and energy efficiency.

Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.

Naomoto Standard Comfort
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control

Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Naomoto’s solution to a gravity feed iron that does not require hanging a water tank above the iron for gravity. This iron is a pump driven tank HYS410/520P
The PS-2 pump also has a steam volume control.
The iron also makes steam like the iron above and features an electronic thermostat for temperature ranges of +/- 4° F

Naomoto HSP 320 All Steam Iron Head Only for 2 in1 Boiler Hose System ETA January 2023

Naomoto, HSP 320, Steam Boiler Iron, Head Only, for 2 in1 Hose System, Tuffram Non Stick PTFE Teflon, & Hard Chrome, Iron Sole Finish, Heat Shield, 1Kg, 2.2Lb, 190mm×60mPT

24050: Naomoto HSP 320 All Steam Iron Head Only for 2 in1 Boiler Hose System
Our Price: $1,099.00
Prices are subject to change, and only current prices will be honored.

Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

2-in-1 Hose system
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.

Tuffram finish iron sole
A PTFE Non Stick injected Iron sole makes smooth and easy ironing with long life.

Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.

NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control

Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Machine Dimension: 190mm×60mm
Weight: 1.06kg
Sole Finishing: Hard Chrome

Naomoto Japan HSL 620 All Steam Boiler Iron Head Only 1.8kb, 2in1 Hose System, made in Japan

Naomoto, HSL 620, Steam Boiler Iron, Head Only, 2in1 Hose System, Tuffram Teflon, and Hard Chrome, Iron Sole Finish, Heat Shield, 1.8Kg, 4 Pounds

24049: Naomoto Japan HSL 620 Steam Boiler Iron Head Only, 2in1 Hose System
Our Price: $839.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

2-in-1 Hose system
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.

Tuffram finish iron sole
A Non Stick PTFE injected Iron sole makes smooth and easy ironing with long life.

Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.

NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control

Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Machine Dimension: 202mm×141mm
Weight: 1.8kg
Sole Finishing: Hard Chrome

Naomoto HSP 420 Steam Boiler Iron Head Only for 2in1 Hose System (Your Boiler) Tuffram Teflon Hard Chrome Iron Sole Finish, Heat Shield, 1.3Kg, 2.2Lb

Naomoto HSP 420 Steam Boiler Iron Head Only for 2 in1 Hose System, Tuffram Teflon Hard Chrome Iron Sole Finish, Heat Shield, 1.3Kg, 2.2Lb, 203mm×100mm
Our Price: $839.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

2-in-1 Hose system
A mechanism, which the condensation drain tube is built into the steam feeding hose, enables you to be free from problems forever such as uneasy handling and watering.

ITS System
A mechanism, which prevents condensation in the iron chamber, offers a superior performance in your ironing.

Tuffram finish iron sole
A Teflon injected Iron sole makes smooth and easy ironing with long life.

Three-dimensional curved iron sole
The irons especially for final pressing are required the smooth movement in order to make beautiful finish in your garment in short time. So the Three-Dimensional Curved Iron Sole amazingly responses your needs such as high quality pressing with high production.

NAOMOTO STANDARD COMFORT
*Molded Urethane Handle *Open End Handle *Heat Shield
*Excellent Weight Balance *Fine Steam Volume Control

Hard chrome finish iron sole
The best seller "All Steam Iron" HS series proves the endurance and the reliability.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Iron Head Only, you must have an exisiting boiler system to attach this iron head

Machine Dimension: 203mm×100mm
Weight: 1.3kg
Sole Finishing: Hard Chrome Coating

Naomoto HSP-410 All Steam Iron for Your Boiler, Non Electric, 2 Hoses

Naomoto HSP-410 All Steam Iron for Boiler, 2 Steam Hoses, Silicone Iron Rest, Ultra LightWeight, Ergonomic Design, SteamValve Heat Shield, No Electric

28170: Naomoto HSP-410 All Steam Iron for Your Boiler, Non Electric, 2 Hoses
Our Price: $699.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

Complete with iron rest and hoses.

* Ultra light-weight
* Ergonomic design
* Includes 2 steam hoses & iron rest
* Steam valve heat shield
* Radiused base for smoother ironing and no leave off marks
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Worlds most preferred industrial All-steam iron
• No electrical components to break down
• Welded Stainless steel construction
• Adjustable condensate return valve
• Thermo-tech jacket keeps hands cool
• Supplied with 2 high pressure hoses
and a silicon iron rest.

Naomoto HYS5 3Pk Demineralizer Filter Bags of Resin for Gravity Feed Irons

Naomoto, HYS-5, Demineralizer, Filter Resin, for Removing Minerals, & Sediments, from HYS, Gravity Feed, Steam Irons, - Minimum Order, Package of 3, Naomoto HYS5 Pack of 3 Demineralizer Filter Resin Bags for Removing Minerals & Sediments from Water going into HYS58 & HYS520 Gravity Feed Steam Irons
Our Price: $129.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features



  • Naomoto HYS-5 Demineralizer Filter Resin QTY 3
Non-US Warranty: 30 days parts and labor.

Naomoto HYS-5 Silicone Covered Hard Metal Iron Rest, Part 1352101 Also for HYS 520 & HYS58 Gravity Feed Steam Irons

Naomoto, HYS-5, Silicone Covered, Iron Rest, (hard metal inside ), Part 1352101, for HYS 520, & HYS58, Gravity Feed, Steam Irons

 Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

This item is not sold separately and may only be purchased with a Naomoto HYS 520 Iron.
Non-US Warranty: 30 days parts and labor.

Naomoto HYS-5 Silicone Hot Iron Rest (soft) Part 1352108, Also for HYS 520 & HYS58 Gravity Feed Steam Irons

Naomoto, HYS-5 Silicone, Iron Rest, (soft), Part 1352108, for HYS 520, & HYS58, Gravity Feed, Steam Irons

 Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

This item is not sold separately and may only be purchased with a Naomoto HYS 520 Iron.
Non-US Warranty: 30 days parts and labor.

Naomoto Iron Shoe #2 Aluminum Soleplate, Coil Spring, for HYS 58

Naomoto, Iron Shoe, # 2, for HYS 58, Gravity Feed, Steam Iron, Prevents Scorching, and Shinning Garments, and Fabrics, when Ironing

 Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Iron Shoe is Shown to Right of Iron for Illustration. Only orderable with Naomoto HYS58 Gravity Feed Steam Iron, because of manufacturer's minimum order value requirements.

This item is not sold separately and may only be purchased with a Naomoto HYS 58 Iron.
Non-US Warranty: 30 days parts and labor.

Naomoto 03c461 5' Foot Vinyl Extension Hose Accessory for Naomoto HYS-58 & HYS-520
Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Naomoto 03c461 5' Foot Vinyl Extension Hose Accessory for Naomoto HYS-58 & HYS-520
Non-US Warranty: 30 days parts and labor.
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.