Juki TL18QVP Haruka (TL2010 TL2020 TL2200 Mini) 9" Arm Straight Stitch Sewing Piecing Free Motion Quilt Machine +Micro Lift* Metal Casting+3 Xtra Feet

In Stock! INCLUDED: MICRO-LIFT, Hemming Foot (A91040900A0), 1/5" Quilting Foot (A9811E98AA0A), 1/4” Presser Foot (40171428), Quilting Foot Front Open Toe (40171422), Quilt Guide for Even Feed Foot (40171424), Foot Switch Stopper (40165358). The difference is that TL18QVP Haruka has the exclusive Micro Presser Foot Lift  knob on top of the machine for adjusting 0-2mm distance of foot above plate to accommodate feeding of stretchy knits to thick seams and everything in between. 

Checkout online with Synchrony 0% financing
* Synchrony Bank 12 Months No Interest Financing Equal Monthly Pay plus any applicable taxes. Apply online. Transaction Code 112 Synchrony will advise you of any maximum amount or full credit that you can use towards purchase.


Haruka TL-18QVP is a single needle, lock-stitch, portable sewing machine, constructed of aluminum die-casting to ensure industrial-quality sewing. As a reflection of JUKI’s Japanese heritage, the TL-18QVP was named Haruka meaning “beyond.” Go beyond expectation with Haruka!

Same as Juki TL98 +1 Pedal Trim + Speed Control On Board. Be sure to use your toes on the foot control to run the machine and your heel to activate the thread trimmer. If you use try to use your heel to run the machine, it will only activate the thread trimmer and not run the machine. John Douthat, Owner & Tech, AllBrands.

The New Juki TL18QVP is a Single Needle Lockstitch Machine for straight stitching and quilting is also perfect for tailoring, dressmaking and home decor items. The Juki TL18QVP can be used as a table top machine, mounted into some cabinets or used on machine quilting frames. It is portable and has a built in carrying handle. Sewing area extension shown in picture is included with the machine.

The Juki TL18QVP is a high-performance sewing and quilting machine. The TL18QVP is a single needle, lock-stitch, portable machine, constructed of aluminum die-casting to ensure industrial-quality sewing.

*With advanced features, such an industrial sub-tension system, *variable speed control slider, and bright white LED lighting, this machine is built for precision sewing. With a large work area of up to 23 inches (with auxiliary table attached), the TL-2000Qi can handle large quilt, sewing or home decor project with ease.

Three Types of Quilting Foot / Drop Feed

• Three types of quilting feet are supplied as standard accessories with the machine. A 1/5" Quilting Foot is supplied along with a a 1/4" quilting foot and a quilting foot with a front open toe. The feed dog can be raised and lowered simply by depressing a switch. When quilting, the drop feed allows you to sew curved stitches with ease.
  
  Quilting Foot Front Open Toe
  
• This presser foot for free-motion sewing is open at the front so that the needle area is easy to see. Since the presser foot moves up and down together with the movement of the needle, thick seams can easily be crossed.
  
  1/5" Quilting Foot
  
• This presser foot is used for free-motion quilting. With the feed dog lowered, you can freely move the fabric to draw using stitching. The distance from the needle entry point to the outer edge of the presser foot is 1/5” (5mm). Since the presser foot moves up and down together with the movement of the needle, thick seams can easily be crossed.
  
  1/4" Quilting Foot
  
• With a distance of 1/4” (6.5mm) from the needle entry point to the outer edge, this presser foot is perfect for echo quilting, stitching sewn equally spaced using the edge of the presser foot as a guide.
  
  Even Feed Foot
  
• With its reliable feed, the even feed foot ensures the machine's ability to produce beautiful seams when sewing difficult-to-feed fabrics such as georgette and velvet, as well as heavy weight materials such as leather.
  
  Automatic Thread Trimmer
  
• The machine is equipped with an automatic thread trimming device that simultaneously cuts the needle and bobbin threads at the sewing end by lightly pressing the push-button. It uses the thread trimming mechanism that is similar to the industrial sewing machine type.
  
  Easy Bobbin Replacement
  
• Bobbin replacement is a breeze even with the auxiliary table installed, thanks to a large bobbin case opening and a removable plate in the auxiliary table.
  
  Bobbin Winding (Auto-Stop)
  
• Prepare the bobbin for winding simply by installing it on the bobbin winder. The bobbin stops spinning automatically when it is full.
  
  Automatic Needle Threader
  
• The push lever automatic needle threader easily threads the needle without eyestrain and allows you to start sewing quickly.
  
  Knee Lifter Lever
  
• The knee lifter lever allows you to lift / lower the presser foot without using your hands.
  
  Adjustment of Presser Foot Pressure
  
• Presser foot pressure can be adjusted according to the fabric being sewn by turning a regulator located on the top of the machine.
  
  Extended Sewing Area
  
• The throat size from the needle to inside the machine is 8.5 inches.
  
  LED Sewing Light Brightness Adjustment Switch
  
• A switch in the needle area allows you to adjust the brightness of the light between high, medium, low, and of. Adjust the brightness to make hard to see seams and stitching areas easier to see.
  
  Attachment Mounting Plate
  
• A separate attachment mounting plate for installing fabric guides and other attachments. This extends the life of the sewing machine, as it can now be replaced when the mounting holes become damaged.
  
  Float Function (micro-lifter)
  
• Now equipped with the same mechanism as Juki industrial sewing machines for preventing uneven sewing on quilts as velvet, as well as stretched stitches on knit fabrics. The presser foot floats 0-2 mm above the material, making it useful for stitching over thick seams.
  
  Click here to access the Juki warranty registration form

Juki TL Comparison Chart

Known as a workhorse, the Haruka TL-18QVP lives up to this standard as a single needle, lock-stitch, portable sewing machine, constructed of aluminum die-casting that ensures industrial-quality sewing.


Equipped with the same mechanism as JUKI's industrial machines, the TL-18QVP features a float foot function, great for a multitude of layers and thick seams perfect for fashion, handbag making, and piecing. If you're looking for precise seams, the TL-18QVP comes with a mounting base to attach gauges and binders. Want to try free-motion quilting? Drop the feed dogs and sew away! The sewing possibilities are endless.


Made to last, the TL-18QVP comes with additional features like presser foot up and down, thread trimming, and speed control. Additional accessories like the knee lift lever and extension table make the TL-18QVP is a perfect addition to any sewing space, offering easy control and a smooth ride.


As a reflection of JUKI’s Japanese heritage, the TL-18QVP was named Haruka meaning “beyond.” Go beyond expectation with Haruka!


Scroll down for a full list of features, specifications, and standard accessories.

Brochure Catalog on Juki TL18QVP Haruka

Instruction Manual Juki TL18QVP Haruka

• Sewing Speed: Min. 55 - Max. 1,500SPM
  
• Stitch Length: Max. 6mm
  
• Lift of the Presser Foot: By lever Max. 9mm, by knee lifer Max. 12mm
  
• Needle: HA x 1 (130/705H) #7-#18 (HL x 5 #9-#16)
  
• Dimensions: 452(W)x350(H) x 219(D)mm
  
• Weight (machine only): 11.5Kg / 25.4Lb
  
• Auxiliary table (dimensions): 590(W) x 355(D)mm
  
• Lamp: LED
  
• Hook: Horizontal-axis Full-rotary Hook
  
• Shank Type: High Shank
  
• Dimensions: 17.8" (W) x 8.6" (D) x 13.8" (H) inches
  
• Sewing Speed: Min. 55, Max. 1,500 SPM
  
• Stitch Length: Max. 6mm
  
• Needle: HAx1 (130/705H) #7-#18 (HLx5#9-#18)
  
• Weight (Machine only): 25.4 lb./11.5 kg
  
• Rated Voltage / Power Consumption: 120V / 1.4A, 100W
  
• Power Consumption of the Lamp: 12V, 3W
  
• Auxiliary Table (Dimensions): 590 x 335 (mm)
  
• Hook: Vertical full rotary hook
  
• Lift of the Presser Foot : By lever Max 10mm, by knee lifter Max 12mm
  
• 4-step adjustable LED light
  
• Sliding Speed Control
  
• One Pedal foot control
  
• Sews heavy weight materials with ease
  
• Predetermined stop position of the needle
  
• 1/4 foot and free action foot
  
• Adjustment of pressing pressure according to material weight
  
• Thread tension scale
  
• Automatic stop-bobbin winding
  
• Portable sewing machine
  
• Automatic thread trimmer
  
• Universal presser foot tape ribbon narrow elastic application
  
• Presser foot lift 7 mm by hand
  
• Throat Area: 8.5(L)x 5.9 (H) inches
  
• Auxilliary table included: dimensions 590 mm x 277 mm (12 x 23)
  
• UL Listed
  
  
  
  
  
  
  
  
  
  
  
  
  
  Reviews on Juki TL-18QVP Haruka
  
  Juki Warranty Information
  
  JUKI TL Series - Chapter 1: Set Up
  Welcome to chapter 1 of the TL-18QVP instructional video series. In this video, we will teach you how to set up and operate your machine.

Standard presser foot/ Hemming foot/ Zipper attaching foot/ Even feed foot/ 1/5" Quilting foot/ 1/4" Quilting foot/ Quilting foot front open toe/ 1/4" Compensating presser foot/ 1/4" Presser foot/ Quilt guide for even feed foot/ Sewing machine cover/ Auxiliary table/ Foot controller/ Foot switch stopper/ Power cord/ Exclusive screwdriver (2)/ Needles (HAx1)/ Bobbins (4)/ Knee lifter lever/ Oiler/ Spool cap/ Cleaning brush

Includes the Following Accessories:

• Standard Straight Stitch Foot
  
• 1/4 inch Quilt Foot still included
  
• 1/5 inch Quilt (Also called "Free Motion" Darning Feet) Foot*
  
• Walking Foot
  
• Compensating Foot
  
• Rolled Hem Foot
  
• Zipper Foot
  
• Foot Control and Cord over 50" Long
  
• Power Cord
  
• Instruction Manual
  
• Lint Cleaning brush
  
• 4 Bobbins
  
• Spool cap
  
• Oiler
  
• Needle pack
  
• Power cord
  
• Foot control w/ thread trimmer
  
• Instruction manual
  
• Knee lever Lifter
  
• Extension table (see product image)
  
• Auxiliary 8" x 12" extension work table
  
• Exclusive T screwdriver (2)
  
  Note: The TL-2010Q now comes with 3 less feet below that are included with TL18QVP
  They are:
  
• Roll Hemming Foot A9837-090-0A0
  
• Compensating Foot A5149-E98-ZA0
  
• 1/5 Quilting Foot A9811-E98-AA0A

Automatic Thread Trimmer The machine is equipped with an automatic thread trimmer device that simultaneously trims the needle and bobbin threads at the sewing end by lightly pressing the push-button. It uses the thread trimming mechanism.

Even Feed Foot With its reliable feed, the even feed foot ensures the machine's ability to produce beautiful seams when sewing difficult-to-feed fabrics such as georgette and velvets, as well as heavy weight materials such as leather.

Heavy Weight Materials are Sewn with Ease The speed control mechanism, operated by microcomputer, allows the machine to sew materials at low speeds. This provides for accurate feed and perfect stitching when sewing heavy weight fabric, quilting and multiple layers of materials. This is especially useful with detailed quilting, like feathering and stippling. The speed control can be lowered to as slow as 200spm or maxed out at 1500spm.

Predetermined Stop Position of the Needle When you stop sewing, the machine will come to an accurate stop with the needle down. To move the needle up or down as desired, simply press the needle up/down button. An essential feature for quilters, the needle automatically stops in the down position, which prevents your fabric from shifting out of place when pivoting.

Two Types of Quilting Foot/Drop Feed The quilting feet are designed for free motion quilting and free-hand embroidery. The feed dog can be raised and lowered simply by depressing a switch. When quilting, the drop feed allows you to sew curved stitches with ease. No need to install a special darning plate to do free motion quilting. The Juki TL18QVP has a built in lever that, when pressed, automatically lowers the feed dogs so you can quickly switch to free motion quilting.

Knee Lifter Lever The knee lifter level allows you to lift/lower the presser foot without using your hands. The presser foot can be raised as high as 12mm. This is an essential feature for efficient quilting. This allows you to keep both hands on your quilt while using your knee to lift the presser foot; you'll never go back to quilting without one again!

Automatic Needle Threader The push lever automatic needle threader easily threads the needle without eyestrain and allows you to start sewing quickly.

Thread Tension Scale The machine is provided with the thread tension scale, which allows you to adjust the tension according to the thread and material to be used.

Easy Bobbin Replacement A new bobbin case latch and an enlarged bobbin case area make it easier to remove and replace the bobbin.

Adjustment of Presser Foot Pressure Presser foot pressure can be adjusted according to the fabric being sewn by turning a regulator located on the top of the machine.

Oiling the Machine Apply 1 drop of oil to each of the arrow points shown above for every 4 to 8 hours of sewing. Use machine oil (New Defrix Oil No. 1) or similar supplied with the machine. Note: Some holes in your machine are meant for screws, please do not oil!

[Description of changes : Change of the first tension shape] With this change, the knob, spring, and mounting base are changed and first thread tension disk fix plate is removed. (There is interchangeability between old and new ASM parts). Please note that thid minor change does NOT affect the stitch quality of the machine. [Serial numbers of the sewing machines subject to changeover] 5UDLC00134 and Up.

Sub Tension Unit Even if strongly twisted thread should be used, the unit will avoid "return of twist of thread" and supply needle thread to the main tension unit without thread quivering. It helps sewers create sttiches with stable thread tension. The improved thread tension system intelligently avoids the return of twisted threads, even when using strongly twisted thread, giving you a more stable stitch tension and eliminating "thread quivering".

Float Function (Micro-Lifter): Now equipped with the same mechanism as JUKI industrial sewing machines for preventing uneven sewing on quilts and velvet, as well as stretched stitches on knit fabrics. The presser foot floats 0 to 2mm above the material making it useful for sewing over thick seams.

Attachment Mounting Plate: A separate attachment mounting plate for installing fabric guides and other attachments. This extends the life of the sewing machine, as it can now be replaced when the mounting holes become damaged.

LED Sewing Light Brightness Adjustment: A switch in the needle area allows you to adjust the brightness of the light between high, medium, low, and off.

Maximum Sewing Speed ControlMaximum Sewing Speed Easily control your sewing speed from 200 to 1500 SPM with the adjustable slide.

Drop FeedDrop Feed The feed dog can be raised and lowered by moving the lever. Perform free-motion quilting and free-hand embroidery with ease.

Automatic Needle Threader: The automatic needle threader quickly and easily threads the needle without eyestrain, allowing you to change thread colors as often as you wish.

Automatic Thread Trimmer: Automatic Thread Perfectly trim the needle and bobbin threads with the simple push of a button of foot pedal activation. Industrial sewing machine technology provides exceptional durability, noise control and cutting. Sewing can continue after automatic cutting even if the bobbin thread is not visible above the throat space.

Sub-Tension Unit: No matter the thread type, sub-tension ensures stitches are sewn with a balanced thread tension. Achieve perfectly balanced threads with every stitch.

Presser Foot Pressure Adjustment: Turn the regulator on top of the machine to adjust the presser foot pressure according to the thickness of the fabric.

NeedleNeedle Up/Down Control: Each press or push of the needle up/down switch moves the needle halfway up or down. Hold the switch down to sew a slow single stitch – useful when sewing corners and at the end of stitching.

Knee Lifter LeverKnee Lifter Lever: The knee lifter lever allows you to lift/lower the presser foot without using your hands. The presser foot can be raised as high as 12mm making it easy to insert thick fabrics and large projects.

Foot Controller with Thread Trimming Function: Automatically trim both needle and bobbin threads.

Cast aluminum housing. Strength and durability by design.

Removable plastic lower housing for access, facilitate easier servicing when needed.

Power and synchronization are provided via brushless DC motor for power (torque) and durability and cog belts (avoids belt stretch and slipping related issues and improves control)

All shafts supported in bearings mounted or incorporated into the cast aluminum frame.

Electronics mounted in plastic housing. (Reduces vibration and static charge from being mounted to metal where moving metal parts create friction)