*for Brother Low Shank NV1000, NV1200, NV1250D, NV1500D, NV2500D, NV2800D, NV4000D, NV4500D, NV4750D, NV5000 Sewing Embroidery Machines.
Small Needle Hole in this Low Shank Screw On Foot Prevents Skipped Stitches and Shredded Thread Caused by Flagging of Fabric Up and Down on the Needle versus a larger hole in the foot.
Obtain best results using a Straight Stitch Needle Plate in combination with this foot to prevent fabrics flagging down on the needle.
John Douthat, Owner Tech.
For free-motion quilting, use free-motion quilting foot
“C” or free-motion open toe quilting foot “O”
depending on the stitch that is selected, and set the
machine to free-motion sewing mode. In this mode, the
presser foot is raised to the necessary height for free motion
sewing.
We recommend attaching the foot controller and
sewing at a consistent speed. You can adjust the sewing
speed with the speed limit control slider on the machine.
Using Free-motion Quilting Foot “C”
The free-motion quilting foot “C” is used for freemotion
sewing using the straight stitch needle plate.
Make sure that the quilting foot is attached properly
and not slanted. Hold the quilting foot in place with your right
hand, and tighten the presser foot holder
screw using the screwdriver with your left
hand.
CAUTION
- Be sure to tighten the screw securely with the
screwdriver. Otherwise, the needle may touch the
quilting foot, causing it to bend or break.
- Lower the feed dog position switch to to
lower the feed dogs.
Guaranteed to fit Babylock Sewing Machine Models:
Aventura BLMAV, BLG, BLG2, BLG2-NZ, BLG3 Ellegante 3, BLMSP Soprano, BLSO Ellisimo, BLSOG Ellisimo Gold, BLSOG2 Ellisimo Gold II, BLSR, BLSR-EB, BLSY, ESP
Guaranteed to fit Brother Sewing Machine Models:
BQ950, NQ1300, NQ1300PRW, Innov-is NQ3600D, NV1, NV2500D, NV2800D, NV4000, NV4000D, NV4500D Duetta, NV4750D, NV5000, NV6000D, NV6700D, NV6750D Quattro 3, NX2000, NX5000, QC1000
Alternate Part Numbers: XE0765001, BLSO-FMC
