 |
December 21, 2024 |
DIME Sticky Hoop Flat Metal Frames for Hoopless Embroidery on NV1500-XP2 Brother Babylock Single Needle Embroidery Machines*
 DIME Sticky Hoop SH00A1S Flat Metal 5" x 7" Frame for Hoopless Embroidery—Brother/Babylock |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Brother NV1500, NV2500, NV2800, NV4000, NV4500, NV4750, NQ1400 NQ1600, NQ3500, NQ3600, NV6000, 6500, 6750, VE2200, VE2300, VM5100, VM5200, VM6200, XV8500, XV8550, XJ1, XE1, XP1, XP2 and comparable Babylocks
Provides a flat surface for hoopless embroidery. Pre-cut, tearaway adhesive stabilizer gives a strong stable hold for embroidery projects.
The flat metal frame streamlines trimming for applique and in-the-hoop projects. No embroidery rings to interfere with trimming! And, since materials can extend beyond the sewing field, the Sticky Hoop is "sideless"!
Sticky Hoop Includes:
Provides a flat surface for hoopless embroidery. Pre-cut, tearaway adhesive stabilizer gives a strong stable hold for embroidery projects.
The flat metal frame streamlines trimming for applique and in-the-hoop projects. No embroidery rings to interfere with trimming! And, since materials can extend beyond the sewing field, the Sticky Hoop is "sideless"!
Sticky Hoop Includes:
- Sticky Hoop frame
- 25 sheets of Peel 'n Stick tear-away adhesive stabilizer pre-cut for your hoop size
- 4 adhesive centering rulers
How to Use the Sticky Hoop:
Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame, wrong side up and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
Designed for Ease:
Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
Snap Hoop Monster Owners—Please Note:
The Sticky Hoop frame and Snap Hoop Monster frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
Non-US Warranty: 30 days parts and labor.
Specifications
- Provides a flat surface for hoopless embroidery
- Pre-cut, tear-away adhesive stabilizer gives a strong, stable hold for embroidery projects
- Flat metal frame streamlines trimming for applique and in-the-hoop projects
- No embroidery hoop rings to interfere with trimming
- Materials can extend beyond sewing field as Sticky Hoop is ‘sideless’
This Hoop is compatible with many Brother and Babylock models. To view the machine compatibility chart, click here.
DIME Snap Hoop Monster SH00A9M LM9 Magnetic Frames 9.5" X 14" Continuous Embroidery for XV8500 UPG to XV8550, XE1, XJ1, XP1, XP2, Babylocks
 90607: DIME Snap Hoop Monster SH00A9M Magnetic Frames 9.5" X 14" Continuous Embroidery |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Snap Hoop for heavy-duty projects that need a monster grip! Experience the effortless one step method to hoop and align heavyweight fabrics. The secret of this magnetic hoop is in the patented design. And now you can have the Snap Hoop Monster It's perfect for:
- Terry cloth
- Bulky fleece
- Quilt sandwiches
- Heavy fabrics
- Continuous embroidery
- Allover embroidery
Designed for Ease
Snap Hoop Monster comes with a flat magnetic top and metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine. Simply lay the stabilizer and fabric over the bottom frame and snap the top frame in place. Voila! Even the heaviest of fabric is secured.
Be Creative with Small & Large Projects
Multiple hoopings are a breeze with the Snap Hoop Monster. Just lift the magnetic top frame, slide your fabric and snap the top frame back in place, no need to remove the bottom frame – you can hoop right under the needle! Easily achieve flawless continuous embroidery when stitching quilts, towels and more. Stitch all the way to the edge of fabric by securing just two or more sides in the hoop. Snap Hoop Monster is available in multiple hoop sizes for most machine brands!
Click here to learn how to apply rulers in your Snap Hoop Monster
Snap Hoop Monster TutorialHappy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.
Non-US Warranty: 30 days parts and labor.
Specifications
Easily make adjustments to heavy hooped fabrics. The Snap Hoop Monster is easy to use and offers pain-free hooping with no hand strain! Stop hoop burn and master allover embroidery and multiple hoopings. With the Snap Hoop Monster you can stitch all the way to the edge of your fabric. Includes: one metal base frame with machine attachment, one magnetic top frame, one magnetic safety shield, four 14" adhesive centering rulers, and target stickers. For Baby Lock & Brother machines.Babylock®
Altair
Destiny
Destiny II
Meridian
Solaris
Solaris 2
Brother®
Dream Machine 2 Innovis XV8550D
Dream Machine XV8500D
Innov-is Stellaire XE1
Innov-is Stellaire XJ1
Luminaire Innov-ís XP1
*Our top frames come with a 2 year warranty.
Bottom frames and attachments come with a 1 year warranty.
If a product is received damaged, incomplete, or defective (any fault on the manufacturer) we will not only replace the component/item but we will also be responsible for any shipping charges. If the customer selects the wrong item, isn’t satisfied with the product, or would like to switch to another size hoop (no fault on the manufacturer) then the customer will be eligible for a return. However, the customer will be responsible for any shipping charges.
DIME Snap Hoop Monster SH00A11M Magnetic Frames 10.5" X 16" Continuous Embroidery for Brother XP1 XP2 XP3 Luminaire and Babylock Solaris BLSO
 93390: DIME Snap Hoop Monster SH00A11M Magnetic Frames 10.5" X 16" Continuous Embroidery |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Experience the effortless one step method to hoop and align heavyweight fabrics. The secret of this magnetic hoop is in the patented design. And now you can have the Snap Hoop Monster. It's perfect for:
- Terry cloth
- Bulky fleece
- Quilt sandwiches
- Heavy fabrics
- Continuous embroidery
- Allover embroidery
Designed for Ease
Snap Hoop Monster comes with a flat magnetic top and metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine. Simply lay the stabilizer and fabric over the bottom frame and snap the top frame in place. Voila! Even the heaviest of fabric is secured.
Be Creative with Small & Large Projects
Multiple hoopings are a breeze with the Snap Hoop Monster. Just lift the magnetic top frame, slide your fabric and snap the top frame back in place, no need to remove the bottom frame – you can hoop right under the needle! Easily achieve flawless continuous embroidery when stitching quilts, towels and more. Stitch all the way to the edge of fabric by securing just two or more sides in the hoop. Snap Hoop Monster is available in multiple hoop sizes for most machine brands!
Click here to learn how to apply rulers in your Snap Hoop Monster
THE WEIGHTLESS QUILTER X THE SNAP HOOP MONSTER Watch as Eileen takes on this giant quilt with the ease of the Weightless Quilter and help from the Snap Hoop Monster in ONE day!
*Our top frames come with a 2 year warranty.
Bottom frames and attachments come with a 1 year warranty.
If a product is received damaged, incomplete, or defective (any fault on the manufacturer) we will not only replace the component/item but we will also be responsible for any shipping charges. If the customer selects the wrong item, isn’t satisfied with the product, or would like to switch to another size hoop (no fault on the manufacturer) then the customer will be eligible for a return. However, the customer will be responsible for any shipping charges.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Snap Hoop Monster TutorialHappy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.DIME Snap Hoop Monster SH00A10M Magnetic Frames 9.5in X 9.5in Embroidery for Brother XP, Stellaire, XV8500 Upgraded, XV8550, Babylock Destiny Solaris
 90607: DIME Snap Hoop Monster SH00A9M Magnetic Frames 9.5" X 14" Continuous Embroidery |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Experience the effortless one step method to hoop and align heavyweight fabrics. The secret of this magnetic hoop is in the patented design. And now you can have the Snap Hoop Monster It's perfect for:
- Terry cloth
- Bulky fleece
- Quilt sandwiches
- Heavy fabrics
- Continuous embroidery
- Allover embroidery
Designed for Ease
Snap Hoop Monster comes with a flat magnetic top and metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine. Simply lay the stabilizer and fabric over the bottom frame and snap the top frame in place. Voila! Even the heaviest of fabric is secured.
Be Creative with Small & Large Projects
Multiple hoopings are a breeze with the Snap Hoop Monster. Just lift the magnetic top frame, slide your fabric and snap the top frame back in place, no need to remove the bottom frame – you can hoop right under the needle! Easily achieve flawless continuous embroidery when stitching quilts, towels and more. Stitch all the way to the edge of fabric by securing just two or more sides in the hoop. Snap Hoop Monster is available in multiple hoop sizes for most machine brands!
Click here to learn how to apply rulers in your Snap Hoop Monster
Snap Hoop Monster TutorialHappy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.
*Our top frames come with a 2 year warranty.
Bottom frames and attachments come with a 1 year warranty.
If a product is received damaged, incomplete, or defective (any fault on the manufacturer) we will not only replace the component/item but we will also be responsible for any shipping charges. If the customer selects the wrong item, isn’t satisfied with the product, or would like to switch to another size hoop (no fault on the manufacturer) then the customer will be eligible for a return. However, the customer will be responsible for any shipping charges.
Non-US Warranty: 30 days parts and labor.
Specifications
Easily make adjustments to heavy hooped fabrics. The Snap Hoop Monster is easy to use and offers pain-free hooping with no hand strain! Stop hoop burn and master allover embroidery and multiple hoopings. With the Snap Hoop Monster you can stitch all the way to the edge of your fabric. Includes: one metal base frame with machine attachment, one magnetic top frame, one magnetic safety shield, four 14" adhesive centering rulers, and target stickers. For Baby Lock & Brother machines.DIME Monster Quilt Block Maker, 8x8 Hoop Accessory for your 8x8 Snap Hoop Monster, Templates to Make 5, 6, 7, 8" Blocks, Choose Single or Multi Needle
 94072: DIME Monster Quilt Block Maker Hoop Accessory for 8x8" Snap Hoop Monster |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Here's a new innovation from dime! It's a quilting tool that conserves fabric and batting.
The Monster Block Maker is a companion product to the 8" x 8" Snap Hoop Monster. Now there's no need to make a quilt sandwich that fits the entire hoop! Use the 5", 6", 7" or 8" Block Maker Template to save fabric and batting.
Product Details:
4 reusable plastic templates for 5", 6", 7" and 8" blocks
60 yards of ¼" wide double stick Monster Block Maker Tape
Instructions for how to use the product
12 Downloadable embroidery designs (C2S, PES, JEF formats)
This product requires the 8" x 8" Snap Hoop Monster which is sold separately.
Float Your Block!The best way to introduce the newest quilting innovation from Designs in Machine Embroidery is with a song:
It floats through the air
With the greatest of ease
The Monster Block Maker
Makes quilt blocks a breeze
The stitching is graceful
It is the bee’s knees
And it’s on special for a limited time!
The Monster Block Maker is a companion product to the 8" x 8" Snap Hoop Monster. Now there's no need to make a quilt sandwich that fits the entire hoop! Use the 5", 6", 7" or 8" Block Maker Template to save fabric and batting.
Product Details:
4 reusable plastic templates for 5", 6", 7" and 8" blocks
60 yards of ¼" wide double stick Monster Block Maker Tape
Instructions for how to use the product
12 Downloadable embroidery designs (C2S, PES, JEF formats)
This product requires the 8" x 8" Snap Hoop Monster which is sold separately.
Float Your Block!The best way to introduce the newest quilting innovation from Designs in Machine Embroidery is with a song:
It floats through the air
With the greatest of ease
The Monster Block Maker
Makes quilt blocks a breeze
The stitching is graceful
It is the bee’s knees
And it’s on special for a limited time!
Non-US Warranty: 30 days parts and labor.
Specifications
Product Details:4 reusable plastic templates for 5”, 6”, 7” and 8” blocks
60 yards of ¾” wide double stick Monster Block Maker Tape
Instructions on how to use the product
12 Downloadable embroidery designs (C2S, PES, JEF formats)
2 Versions Available! One for single needle and one for multi-needle machines. Choose the product that is right for you. This product requires the 8" x 8" Snap Hoop Monster.
Single Needle Compatibility:
Brother Quattro (all versions), THE Dream Machine 1 and 2, XV8500, XV8550
Baby Lock Ellisimo (all versions), Destiny BLDY, Destiny BLDY2
Janome 500E, Elna 830, 400e
Multi-Needle Compatibility:
Brother Entrepreneur Pro 1000, 1000e, X PR-1050x
Baby Lock Enterprise BNT10, BNT10L, Valiant BMV10
DIME PC0002 Eyeglass Case Frame
 96488: DIME PC0002 Eyeglass Case Frame |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. |
Features
Make your very own eyeglass case or evening bag with our brushed silver kiss clasp purse frame. This stylish Eyeglass Case is great for readers, sunglasses and it's a quick and easy project perfect for a gift. Jazz it up with applique, rhinestones, lace charms and more. Make multiples to match all your favorite handbags and outfits!
The Eyeglass Case Frame Comes With:
One 7 3/4" x 2 1/4" brushed silver frame
Instructions for sewing a lined eyeglass or evening bag case
Download link for multi-formatted embroidery design for 6" x 10" and larger hoops
Designs provided in the following formats: C2S, DST, EMD, EXP, HUS, JEF, PCS, PES, SEW, SHV, VP3, XXX
The Eyeglass Case Frame Comes With:
One 7 3/4" x 2 1/4" brushed silver frame
Instructions for sewing a lined eyeglass or evening bag case
Download link for multi-formatted embroidery design for 6" x 10" and larger hoops
Designs provided in the following formats: C2S, DST, EMD, EXP, HUS, JEF, PCS, PES, SEW, SHV, VP3, XXX
Non-US Warranty: 30 days parts and labor.
Specifications
Product Details:4 reusable plastic templates for 5”, 6”, 7” and 8” blocks
60 yards of ¾” wide double stick Monster Block Maker Tape
Instructions on how to use the product
12 Downloadable embroidery designs (C2S, PES, JEF formats)
2 Versions Available! One for single needle and one for multi-needle machines. Choose the product that is right for you. This product requires the 8" x 8" Snap Hoop Monster.
Single Needle Compatibility:
Brother Quattro (all versions), THE Dream Machine 1 and 2, XV8500, XV8550
Baby Lock Ellisimo (all versions), Destiny BLDY, Destiny BLDY2
Janome 500E, Elna 830, 400e
Multi-Needle Compatibility:
Brother Entrepreneur Pro 1000, 1000e, X PR-1050x
Baby Lock Enterprise BNT10, BNT10L, Valiant BMV10
Durkee CF-BRNEW5X7SN Brother SACFSN5X7 Flat Hat Cap Frame Insert fits Inside SA439 EF75 5x7in Hoops for Single Needle NV1500-XP2, Babylock Machines
 |
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Fits Inside SA439 or Babylock EF75 5X7 Hoops for Brother XP2 XP1 XJ1 XE1 XV8500 VM6200 VM5100 VM5200 VE2200 VE2300 VQ3600 VQ3500, NV6000 6700 6750 5000 4750 4500 4000 2800 2500 1500
Includes Top Blue Frame only, you must have the bottom portion of the SA439 5X7 Embroidery Frame from Brother to use this item
We are delighted to introduce our first new single needle cap frame insert, Introducing Durkee Single Needle Cap Frame Inserts - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into either a Brother 5"x7" Accessory#SA439 hoop or, Baby Lock 5" x 7" Item# EF75 Hoop.
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Includes Top Blue Frame only, you must have the bottom portion of the SA439 5X7 Embroidery Frame from Brother to use this item
We are delighted to introduce our first new single needle cap frame insert, Introducing Durkee Single Needle Cap Frame Inserts - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into either a Brother 5"x7" Accessory#SA439 hoop or, Baby Lock 5" x 7" Item# EF75 Hoop.
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in placewith sticky backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement
Please note: This insert is specifically designed with two - and only two - manufacturer's 5" x 7" hoops that come with the machines designated
Compatible with Brother’s Embroidery Hoop
5" x 7" Accessory #SA439 for the following machines:
Innov-is NV2500D, Innov-is NV1500D, Duetta® NV4500D, Quattro® NV6000D, Innov-is 2800D, Quattro® NV6700D, Isodore® Innov-is NV5000, Duetta®2 NV4750D, DreamWeaver™ XE VM6200D, DreamMaker™ XE VE2200, Quattro® 3
Triliogy Limited Edition Innov-is 6750D, BP2100, DreamCreator™XE VM5100, The Dream Machine XV8500D,
Compatible with Baby Lock’s Embroidery Hoop
5" x 7" Item# EF75 for the following machines:
Destiny, Ellisimo BLSO, Ellisimo Gold BLSOG, Ellisimo GoldII BLSOG,Unity BLTY, Journey BLJY, Ellegante 3 BLG3, Ellegante BLG 2, Ellegante BLG, Ellageo BLL2, Ellageo BLL. Esante BLN, Spirit BLPY, Aventura BLMAV, Flourish BLMFO
The Durkee Single Needle Cap Frame Insert. Monogram the front and back of a hat using the Durkee Single Needle Cap Frame Insert. Click Arrow on Video below to play.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
DIME SH00A6S 5" x 7" Sticky Hoop with Clamp Down for Innov-is 1000, 1200, 8200, 8500, PE-700, PE-700II, 750D, 770, 780D, PE800, 820E, NS2750D, NS1150E
 DIME SH00A6S 5" x 7" Sticky Hoop with Clamp Down |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Brother Innov-is 1000, 1200, 8200, 8500, PE700, PE700II, 750D, 770, 780D, PE800, DZ820E, NS2750D, NS1150E, and Simplicity SB7900E.
Provides a flat surface for hoopless embroidery. Pre-cut, tearaway adhesive stabilizer gives a strong stable hold for embroidery projects.
The flat metal frame streamlines trimming for applique and in-the-hoop projects. No embroidery rings to interfere with trimming! And, since materials can extend beyond the sewing field, the Sticky Hoop is "sideless"!
Sticky Hoop Includes:
Provides a flat surface for hoopless embroidery. Pre-cut, tearaway adhesive stabilizer gives a strong stable hold for embroidery projects.
The flat metal frame streamlines trimming for applique and in-the-hoop projects. No embroidery rings to interfere with trimming! And, since materials can extend beyond the sewing field, the Sticky Hoop is "sideless"!
Sticky Hoop Includes:
- Sticky Hoop frame
- 25 sheets of Peel 'n Stick tear-away adhesive stabilizer pre-cut for your hoop size
- 4 adhesive centering rulers
How to Use the Sticky Hoop:
Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame, wrong side up and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
Designed for Ease:
Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
Snap Hoop Monster Owners—Please Note:
The Sticky Hoop frame and Snap Hoop Monster frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
Non-US Warranty: 30 days parts and labor.
Specifications
- Provides a flat surface for hoopless embroidery
- Pre-cut, tear-away adhesive stabilizer gives a strong, stable hold for embroidery projects
- Flat metal frame streamlines trimming for applique and in-the-hoop projects
- No embroidery hoop rings to interfere with trimming
- Materials can extend beyond sewing field as Sticky Hoop is ‘sideless’
This Hoop is compatible with many Brother models. To view the machine compatibility chart, click here.
DIME Snap Hoop Monster SH00A12M Magnetic Frames 10.5in X 10.5in Continuous Embroidery XP1 XP2 XP3 Babylock Solaris 123
93390: DIME Snap Hoop Monster SH00A11M Magnetic Frames 10.5" X 16" Continuous Embroidery |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Experience the effortless one step method to hoop and align heavyweight fabrics. The secret of this magnetic hoop is in the patented design. And now you can have the Snap Hoop Monster. It's perfect for:
- Terry cloth
- Bulky fleece
- Quilt sandwiches
- Heavy fabrics
- Continuous embroidery
- Allover embroidery
Designed for Ease
Snap Hoop Monster comes with a flat magnetic top and metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine. Simply lay the stabilizer and fabric over the bottom frame and snap the top frame in place. Voila! Even the heaviest of fabric is secured.
Be Creative with Small & Large Projects
Multiple hoopings are a breeze with the Snap Hoop Monster. Just lift the magnetic top frame, slide your fabric and snap the top frame back in place, no need to remove the bottom frame – you can hoop right under the needle! Easily achieve flawless continuous embroidery when stitching quilts, towels and more. Stitch all the way to the edge of fabric by securing just two or more sides in the hoop. Snap Hoop Monster is available in multiple hoop sizes for most machine brands!
Click here to learn how to apply rulers in your Snap Hoop Monster
THE WEIGHTLESS QUILTER X THE SNAP HOOP MONSTER Watch as Eileen takes on this giant quilt with the ease of the Weightless Quilter and help from the Snap Hoop Monster in ONE day!
*Our top frames come with a 2 year warranty.
Bottom frames and attachments come with a 1 year warranty.
If a product is received damaged, incomplete, or defective (any fault on the manufacturer) we will not only replace the component/item but we will also be responsible for any shipping charges. If the customer selects the wrong item, isn’t satisfied with the product, or would like to switch to another size hoop (no fault on the manufacturer) then the customer will be eligible for a return. However, the customer will be responsible for any shipping charges.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Snap Hoop Monster TutorialHappy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.Bernette Snap Hoop Monster SH00E3M Magnetic Frames 100x100 4x4" Continuous Embroidery for Bernette B70 B79
 DIME Snap Hoop Monster SH00E3M Magnetic Frames 100x100 Continuous Embroidery Bernette |
Our Price: $189.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
The Snap-Hoop for heavy duty projects that need a monster grip. 4 X stronger than the original Snap-Hoop. Comes with a flat magnetic top and metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine. Simply lay the stabilizer and fabric over the bottom frame and snap the top frame in place. Includes one metal base frame with machine attachment, one magnetic top frame, one magnet safety shield, four 14in adhesive centering rulers, and target stickers. These are machine specific.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Snap Hoop Monster TutorialHappy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.Bernette Snap Hoop Monster SH00E1M Magnetic Frames 130x180 5x7" Continuous Embroidery for Bernette B70, B79
 DIME Snap Hoop Monster SH00E1M Magnetic Frames 130x180 Continuous Embroidery for Bernette B70, B77 |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Snap-Hoop for heavy duty projects that need a monster grip. 4 X stronger than the original Snap-Hoop. Comes with a flat magnetic top and metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine. Simply lay the stabilizer and fabric over the bottom frame and snap the top frame in place. Includes one metal base frame with machine attachment, one magnetic top frame, one magnet safety shield, four 14in adhesive centering rulers, and target stickers. These are machine specific.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Snap Hoop Monster TutorialHappy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.Bernette Snap Hoop Monster SH00E2M Magnetic Frames 140x260 5.5x10" Continuous Embroidery for Bernette B70 B79
 DIME Snap Hoop Monster SH00E2M Magnetic Frames 140x260 Continuous Embroidery Bernette |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Snap-Hoop for heavy duty projects that need a monster grip. 4 X stronger than the original Snap-Hoop. Comes with a flat magnetic top and metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine. Simply lay the stabilizer and fabric over the bottom frame and snap the top frame in place. Includes one metal base frame with machine attachment, one magnetic top frame, one magnet safety shield, four 14in adhesive centering rulers, and target stickers. These are machine specific.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Snap Hoop Monster TutorialHappy National Embroidery Month! For her monthly Stitch Along, Eileen Roche teaches the ins and outs of using her Snap Hoop Monster magnetic hoop for machine embroidery.Bernette 502021.03.87 Ruler Foot Kit bernette 05 Academy Crafter
 Bernette 502021.03.87 Ruler Foot Kit bernette 05 Academy Crafter |
Our Price: $84.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Bernette 502021.03.87 Ruler Foot Kit bernette 05 Academy Crafter
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Bernina 502021.03.91 Presser Foot Holder Screw On Ankle Only for Bernette B70 Snap On Feet
 Bernette 502021.03.91 Presser Foot Holder Screw On Ankle for bernette b77 & b79 Series Snap On Feet |
Our Price: $24.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: New In Box |
Features
Currently, the bernette 77 and 79 are compatible only with built in dual-feed feet. A new presser foot holder is available that expands the compatible accessories for those Machines.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
- Presser foot holder will expands the compatible accessories for the bernette 70 Machine.
DIME SH00A13S 4X4 Basic Sticky Hoop for NV1000 1200 1250 8200 8500 8550, PE700 750 780 800 900, NS2750 2850 1250 1150 SE2000 SE1900 SE1800 SB7900 8000
 DIME SH00A13S 4"x4" BASIC Sticky Hoop with Clamp Down |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
For Brother Innov-is 1000, 1200, 8200, 8500, PE700, PE700II, 750D, 770, 780D, PE800, DZ820E, NS2750D, NS1150E, and Simplicity SB7900E.
Provides a flat surface for hoopless embroidery. Pre-cut, tearaway adhesive stabilizer gives a strong stable hold for embroidery projects.
The flat metal frame streamlines trimming for applique and in-the-hoop projects. No embroidery rings to interfere with trimming! And, since materials can extend beyond the sewing field, the Sticky Hoop is "sideless"!
Sticky Hoop Includes:
Provides a flat surface for hoopless embroidery. Pre-cut, tearaway adhesive stabilizer gives a strong stable hold for embroidery projects.
The flat metal frame streamlines trimming for applique and in-the-hoop projects. No embroidery rings to interfere with trimming! And, since materials can extend beyond the sewing field, the Sticky Hoop is "sideless"!
Sticky Hoop Includes:
- Sticky Hoop frame
- 25 sheets of Peel 'n Stick tear-away adhesive stabilizer pre-cut for your hoop size
- 4 adhesive centering rulers
How to Use the Sticky Hoop:
Remove the protective paper from the Peel 'n Stick adhesive stabilizer. Place the metal frame, wrong side up and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
Designed for Ease:
Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
Snap Hoop Monster Owners—Please Note:
The Sticky Hoop frame and Snap Hoop Monster frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
Non-US Warranty: 30 days parts and labor.
Specifications
- Provides a flat surface for hoopless embroidery
- Pre-cut, tear-away adhesive stabilizer gives a strong, stable hold for embroidery projects
- Flat metal frame streamlines trimming for applique and in-the-hoop projects
- No embroidery hoop rings to interfere with trimming
- Materials can extend beyond sewing field as Sticky Hoop is ‘sideless’
This Hoop is compatible with many Brother models. To view the machine compatibility chart, click here.
DIME HS001 Hoop Setters (One for each end) so Snap Hoop Monster Can Align with Top and Bottom Frames
 DIME HS001 Hoop Setter for Snap Hoop Monster Aligns Top and Bottom Frame |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This clever 2-part device holds Snap Hoop Monster's bottom frame while the stabilizer and fabric or quilt sandwich is placed and the top frame is attached. The result? A perfectly aligned top and bottom frame!
Hoop Setter aligns Snap Hoop Monster’s magnetic top frame with the metal bottom frame during the hooping process. A simple solution to a common challenge!
Simply place the Hoop Setters on a work surface and slide Snap Hoop Monster metal frame into the Hoop Setters. Place your stabilizer and fabric over the bottom frame and then using the Hoop Setters align your top frame and snap in place. Watch the video on this page to see just how easy they are to use!
Hoop Setter aligns Snap Hoop Monster’s magnetic top frame with the metal bottom frame during the hooping process. A simple solution to a common challenge!
Simply place the Hoop Setters on a work surface and slide Snap Hoop Monster metal frame into the Hoop Setters. Place your stabilizer and fabric over the bottom frame and then using the Hoop Setters align your top frame and snap in place. Watch the video on this page to see just how easy they are to use!
Non-US Warranty: 30 days parts and labor.
Specifications
- No more guesswork on aligning your top and bottom frame
- Easy to use
- Each package includes two (2) Hoop Setters
Works with all rectangular and square Snap Hoop Monsters; not for use with Sticky Hoop. For use on Multi-Needle 8x8 and 8x12 Snap Hoop Monsters when the magnetic top is placed on top of the metal frame. Hoop Setters do not fit Multi-Needle 4x4 and 5x7 Snap Hoop Monsters.
DIME Designs in Machine Embroidery HPMAT2 Hi-Definition PINK Hoop Mat Hooping Mat 25.75 x 17.75, Silicone Grid 24 x 17
 DIME Designs in Machine Embroidery HPMAT2 Hi-Definition Hoop Mat Hooping Mat 25.75 x 17.75 Silicone Grid 24 x 17 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Silicone mat with printed 1/2 inch grid provides a non-skid hooping surface. Easily find the centerpoint of any size or brand of hoop. The printed grid allows you to instantly measure by simply placing the hoop down on the mat.
The pink color allows PAL3 to really shine in hi-definition on the mat making centering even easier!
How to use:
The pink color allows PAL3 to really shine in hi-definition on the mat making centering even easier!
How to use:
- Place the Hoop Mat on a flat work surface
- Center the outer ring (standard hoop) or bottom metal frame (Snap Hoop Monster®) on the mat's grid
- Place stabilizer/fabric over the hoop
- Insert inner ring (standard hoop) or place magnetic top frame (Snap Hoop Monster®) on the fabric/stabilizer
Non-US Warranty: 30 days parts and labor.
Specifications
- 100% silicone
- 24" x 17" printed grid
- Hoop Mat measures 25.75" x 17.75" overall
*The Hoop Mat is not a pressing or cutting surface
Hoop Grip 75-214 Rubber Tape 1/4in Wide x 9 Yards Package, Designed for Inside 2 Piece Embroidery Hoops, to Prevent Fabric Slippage and Hoop Burn
 59106: Hoop Grip 75-214 Rubber Tape 1/4" Wide x 9 Yards, Prevents Fabric Slippage |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Hoop Grip adheres to the outside of your inner hoop to keep fabric from slipping. Designed for all embroidery hoops. 1/4"W x 9yds.
Non-US Warranty: 30 days parts and labor.
Alphasew P60876 Universal Cap Hat Hoopster Frame 5.25x4.5" Fits Inside 6.25x5.25" or Larger Embroidery Hoops, Clamp Holds Brim Down, Add Sticky Stab
 38: Alphasew P60876, ST878 Universal Cap Hat Hoopster Fits Hoops from 5-1/4"x6-1/4" or Larger" |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Create exquisite embroidery designs on baseball-style cap crowns with the universal cap hoopster!
Use Sticky Adhesive Stabilizers listed under Recommended Accessories below.
Easily attaches to your embroidery hoop and firmly clamps the visor into place to embroider your design. Your hoop must be larger than 5-1/4" x 6-1/4" with thickness of hoop 1/4" or less.
The Cap Hoopster comes with a template grid to assist you with proper placement of embroidery designs.
NOTE: Does not work with Simplicity SE3 Embroidery machine or the Baby Lock Ellegante machine.
It also will not work with 4x4 embroidery hoops.
Use Sticky Adhesive Stabilizers listed under Recommended Accessories below.
Easily attaches to your embroidery hoop and firmly clamps the visor into place to embroider your design. Your hoop must be larger than 5-1/4" x 6-1/4" with thickness of hoop 1/4" or less.
The Cap Hoopster comes with a template grid to assist you with proper placement of embroidery designs.
NOTE: Does not work with Simplicity SE3 Embroidery machine or the Baby Lock Ellegante machine.
It also will not work with 4x4 embroidery hoops.
- Cap Hoopster allows you to embroider on a typical baseball style cap
- Clamps to embroidery hoops larger than 5.25" x 4.5"
- Cap bill is held down outside your regular hoop
- Measures: 6-1/4" W x 8-3/4" L
- Requires sticky stabilizer such as those at
Stabilizers
Singer Futuras
Janome 300E and up
Bernina 330,340 by Janome
Brother/Babylock 5x7" Hoops and up
Viking, Pfaff, Singer Quantum
Futura Hoops over 5x6 or 6x5
# P60876
[BABYLOCK] - EM1, EM2, ESI, ESE
[BERNINA] - 180, 185, 190
[BROTHER] - PC7000, PC7500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003
[ELNA ] - 9006
[NEW HOME] - MC10000, MC5000, MC9000
[PFAFF] - 7500
[SINGER] - XL1000, XL5000
[VIKING] - #1, #1+, Designer I & II
* Makes the cap embroideryeasy-simply attaches to the machinehoop.
* A special clamp firmly holds the visor, securely keeping the cap in place throughout your projects.
* Including a transparent template with grid marking to ensure proper design placement.
* With the Cap Hoopster, you will be able to embroider beautiful designs on caps.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
It will not fit Janome 8000, etc and Singer XL100 series BABYLOCK - EM1, EM2, ESI, ESE BERNINA - 180, 185, 190 BROTHER - PC7000, PC7500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003 ELNA - 9006 NEW HOME - MC10000, MC5000, MC9000 PFAFF - 7500 SINGER - XL1000, XL5000 VIKING - #1, #1+, Designer I & II Makes the cap embroidery easy-simply attaches to the machine hoop. A special clamp firmly holds the visor, securely keeping the cap in place throughout your projects. Including a transparent template with grid marking to ensure proper design placement. With the Cap Hoopster, you will be able to embroider beautiful designs on caps.Babylock Sewing Machine Models:
EM1, EM2, ESE, ESI
Bernina Sewing Machine Models:
180, 185, 190, 500, 600
Brother Sewing Machine Models:
LB6800PRW, PC7000, PC7500, PC8200, PC8500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003
Elna Sewing Machine Models:
8006, 9006
Husqvarna Viking Sewing Machine Models:
#1, #1+, Designer I, Designer II, Designer SE, Designer I USB, Designer I ESS, Quilt Designer II, Designer II, Quilt Designer, Designer Diamond, Designer Topaz 30, 20, Designer SE, Sapphire 875Q, Sapphire 870, Sapphire 855, Sapphire 850, Sapphire 835, Sapphire 830
Janome (Newhome) Sewing Machine Models:
10000, 5000, 9000, MC10000, MC5000, MC9000
Pfaff Sewing Machine Models:
7500, 7570
Singer Sewing Machine Models:
XL1000, XL5000
# P60876
- UNIQUE UNIVERSAL
* Makes the cap embroideryeasy-simply attaches to the machinehoop.
* A special clamp firmly holds the visor, securely keeping the cap in place throughout your projects.
* Including a transparent template with grid marking to ensure proper design placement.
* With the Cap Hoopster, you will be able to embroider beautiful designs on caps.
[BABYLOCK] - EM1, EM2, ESI, ESE
[BERNINA] - 180, 185, 190
[BROTHER] - PC7000, PC7500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003
[ELNA ] - 9006
[NEW HOME] - MC10000, MC5000, MC9000
[PFAFF] - 7500
[SINGER] - XL1000, XL5000
[VIKING] - #1, #1+, Designer I & II
Brother SA437 Babylock EF73 Embroidery Hoop 1x2.5in for XP1, XV, NV, NQ, VE, VM Series and Babylock Machines
 |
Our Price: $89.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
for Brother Quattro NV6750, NV6700, NV6000, Babylock Ellisimo BLSO, VM6200, VM5100, VE2200, NV5000 Gold, NV4750 BLG3, NV4500 BLG2, NV4000 BLG, NV2800 BLL2, 2500 BLL, 1500 BLN, NQ1400, NQ3500.
Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.
For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro™6000D – New!, Innov-ís 2800D – New!
Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.
For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro™6000D – New!, Innov-ís 2800D – New!
- Works With for Innov-is NV 4500D, 4000D, 2500D, 1500D Machines and Ellegante 2
Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.
- 1" x 2.5"
Non-US Warranty: 30 days parts and labor.
Specifications
For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro® NV6000D, Innov-ís 2800D, Quattro® 2 6700D, Isodore® Innov-ís 5000, Duetta® 2 4750D, DreamWeaver™ XE VM6200D, DreamCreator™XE VM5100, Quattro® 3 Trilogy Limited Edition Innov-ís 6750D, THE Dream Machine Innov-ís XV8500D, Innov-ís NQ1400E, THE Dream Machine 2 Innov-ís XV8550D.The Brother SA437 1"x2.5" Small Embroidery Hoop is the perfect hoop for embroidery in small places. Use the Brother SA437 1"x2.5" Small Embroidery Hoop for monogramming, small collars and cuffs, and infant wear.
For Use With Brother:
1500D
2500D
4000D
4500D
6000D
6700D
6750D
Brother SA438 Babylock EF74 4x4 Embroidery Hoop NQ VE VM NV1500-XV8550D, XE1, XJ1, XP1 XP2 XP, Babylock Models Ellegante Ellisimo Destiny Solaris BLSO
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
for Brother Dream XV8550, XV8500, Babylock Destiny, Quattro NV6750D NV6700D NV6000D, Babylock Ellisimo BLSO, VM6200D VE2200, NV5000D Gold, NV4750D, NV4500D BLG2, NV4000D BLG, NV2800D BLL2, NV2500D BLL, NV1500D BLN, NQ3500, NQ1400E, and comparable Babylock models.
Medium Embroidery Hoop for 4000D, 2500D, 1500D (4" x 4") Embroidery Hoops for a variety of applications.
For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro™6000D – New!, Innov-ís 2800D – New!
Brother Embroidery Machines:
BP2100
Duetta 4500D/4700D/4750D
Quattro 6000D/Quattro 2 6700D
Quattro 3 Trilogy Limited Edition Innov-ís 6750D
DreamCreator XE VM5100
Dream Machine XV8500D/XV8550D
Dream Maker XE VE2200
Dream Weaver XE VM6200D
Innovis 1500/1500D/2500/2800D
Innovis 4000D/5000/5000D/XV8500D
Innovis I / Ie / V3 / V5 / V7
Innovis NQ1400E/NQ1600E/NQ3500D
Luminaire Innov-ís XP1
Baby Lock Embroidery Machines:
Aventura BLMAV, Aventura II BLMAV2
Destiny BLDY, BLDY2
Ellegante BLG/BLG2/BLG3
Ellageo Plus BLL/BLL2
Ellisimo BLSO
Ellisimo BLSOG/BLSOG2/BLSOG-NZ
Esante BLN
Flourish BLMFO, Flourish 2 BLMFO2
Journey BLJY
Solaris
Spirit BLPY
Unity BLTY
Medium Embroidery Hoop for 4000D, 2500D, 1500D (4" x 4") Embroidery Hoops for a variety of applications.
For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro™6000D – New!, Innov-ís 2800D – New!
Brother Embroidery Machines:
BP2100
Duetta 4500D/4700D/4750D
Quattro 6000D/Quattro 2 6700D
Quattro 3 Trilogy Limited Edition Innov-ís 6750D
DreamCreator XE VM5100
Dream Machine XV8500D/XV8550D
Dream Maker XE VE2200
Dream Weaver XE VM6200D
Innovis 1500/1500D/2500/2800D
Innovis 4000D/5000/5000D/XV8500D
Innovis I / Ie / V3 / V5 / V7
Innovis NQ1400E/NQ1600E/NQ3500D
Luminaire Innov-ís XP1
Baby Lock Embroidery Machines:
Aventura BLMAV, Aventura II BLMAV2
Destiny BLDY, BLDY2
Ellegante BLG/BLG2/BLG3
Ellageo Plus BLL/BLL2
Ellisimo BLSO
Ellisimo BLSOG/BLSOG2/BLSOG-NZ
Esante BLN
Flourish BLMFO, Flourish 2 BLMFO2
Journey BLJY
Solaris
Spirit BLPY
Unity BLTY
Non-US Warranty: 30 days parts and labor.
Specifications
Medium Embroidery Hoop for a variety of applications.For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro® NV6000D, Innov-ís 2800D, Quattro® 2 6700D, Isodore® Innov-ís 5000, Duetta® 2 4750D, DreamMaker™ XE VE2200, DreamWeaver™ XE VM6200D, BP2100, DreamCreator™XE VM5100, Quattro® 3 Trilogy Limited Edition Innov-ís 6750D, Dream Machine XV8500D, NQ1400E
EF74 (Brother SA438) 4" x 4" Hoop NV1500D
- NV6750D, VM5100, VM6200D, BLG/BLL/BLN/BLSO
EF74 (Brother SA438) 4" x 4" Hoop NV1500D - NV6750D, VM5100, VM6200D, BLG/BLL/BLN/BLSO/BLTY/BLPY
Medium Embroidery Hoop (4" x 4").
For use with Brother: BP2100, NQ1400E, Innov-ís NV1500D, Innov-ís NV2500D, NV2600, Innov-ís NV2800D, Innov-ís NV4000D, Duetta® NV4500D, Duetta® 2 NV4750D, Isodore® Innov-ís NV5000, Quattro® NV6000D, Quattro® 2 NV6700D, Quattro® 3 Trilogy Limited Edition Innov-ís NV6750D, V3, DreamMaker™ XE VE2200, DreamCreator™XE VM5100, DreamWeaver™ XE VM6200D, XV8500D Dream Machine, and others.
For use with Baby Lock: BLDY Destiny, BLG, BLG2, BLG2-NZ, BLG3, BLL, BLL2, BLMAV, BLN, BLPY Spirit, BLTY Unity, BLSO, BLSOG, BLSOG2, BLSOG-NZ Ellisimo Gold Nancy Zieman, and others.
Baby Lock # EF74 (Brother # SA438).
Measures approx. 4" x 4" (100mm x 100mm). Includes grid.
Brother SA439 Babylock EF75 Genuine Original Embroidery Hoop 5x7" for XP, XJ, XE, XV, NV, NQ, VE, VM and Comparable Babylock Machines*
 9318: Brother SA439 Babylock EF75 Embroidery Hoop 5x7" XP XV NV NQ VE VM Machines |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
*for Brother NV6750D, NV6700D, NV6000D, Babylock Ellisimo ELSO, Dream VM6200, VM5100, VM2200, NV5000 Gold, NV4750 BLG3, NV4500 BLG2, NV4000 BLG, NV2800 BLL2, NV2500D BLL, and NV1500D BLN Babylock Embroidery Machines. And newer models.
- This large embroidery frame is designed to fit the following models: Brother Innovis 4000D and Brother Innovis 4000 and Ellegante 2 and Brother 6000D and Babylock Ellisimo
*PLEASE NOTE: This cap frame insert is not currently compatible with the following machines:
- Baby Lock Aventura II and Flourish II
- Brother NQ1600E and NQ3600
If you have one of these machines listed, please do not purchase this product. Using this product on the listed machines can/will damage the machine.
Non-US Warranty: 30 days parts and labor.
Brother SA440 Babylock EF76 12x7" Embroidery Hoop for XP, XV, NV, VM, VE Machines
 9319: Brother SA440 Babylock EF76 12x7" Embroidery Hoop for XP XV, NV, VM, VE |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
- XLarge Embroidery Frame 12" X 7" For Innovis 4000/4000D And The Ellegante 2, Duetta NV4500D,
Extra Large Hoop for the Innovis 4000D Save time and work! Create extra large designs without the need to reposition your fabric. The convenient repositioning feature allows you to move the hooped fabric to an additional overlapping section. Imagine combining several smaller designs to create a larger design with no need to rehoop. This hoop increases the area that you may embroider in one hooping to 12" X 7" Make it even easier with our PE Design Embroidery Software! Many versions of PE design allow you to combine designs on your PC.
XLarge Embroidery Frame 12" X 7" For Innovis 4000 Duetta 4500D And The Ellegante 2 Extra Large Hoop for the Innovis 4000D Save time and work! Create extra large designs without the need to reposition your fabric. The convenient repositioning feature allows you to move the hooped fabric to an additional overlapping section. Imagine combining several smaller designs to create a larger design with no need to rehoop. This hoop increases the area that you may embroider in one hooping to 12" X 7" Make it even easier with our PE Design Embroidery Software!
Non-US Warranty: 30 days parts and labor.
Brother Genuine Original SA441 Babylock EF81 Embroidery Hoop 6x10" for XP1, XP2, XP3, XV85s, XJ1, XE1, NV, VM, VE, NQ Embroidery Machines
 14154: Brother SA441 Babylock EF81 Embroidery Hoop 6x10" for XP XV NV VM VE NQ |
Our Price: $139.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The Extra Large Embroidery Hoop SA441 has a maximum embroidery area of 10.5" X 6.25". This is the hoop to use for those larger designs. This Hoop can be used with a NV4000D and 4500D, however we recommend that you update this model to version 2.02 or later. This update insures that you will not embroider outside the embroidery area of this hoop.
For Use With: Innov-ís 1500D, Innov-ís 2500D, NV2800D, Innov-ís 4000D, NV4500D, Babylock Ellegante & 2,
For Use With: Innov-ís 1500D, Innov-ís 2500D, NV2800D, Innov-ís 4000D, NV4500D, Babylock Ellegante & 2,
- 10 1/4" x 6 1/4" Hoop
- Embroidering Area: 6” x 10”(160 x 260 mm)
- One template grid is included.
Non-US Warranty: 30 days parts and labor.
Specifications
The Extra Large Embroidery Hoop SA441 has a maximum embroidery area of 10.5" X 6.25". This is the hoop to use for those larger designs. This Hoop can be used with a NV4000D and 4500D, however we recommend that you update this model to version 2.02 or later. This update insures that you will not embroider outside the embroidery area of this hoop. Embroidering Area: 6” x 10”(160 x 260 mm) One template grid is included.Fits the following embroidery machines:
Brother Embroidery Machines:
Duetta 4500D 4700D 4750D
Quattro™ 6000D 6700D
DreamMaker VE2200
DreamWeaver XE VM6200D
Innovis 4000D 5000 5000D
Innovis 1500 1500D 2500 2800D 3500D
Innovis I / Ie / V3 / V5 / V7
Innovis NQ1400E NQ1600E NQ3500D NQ3600D
Luminaire Innov-ís XP1
Baby Lock Embroidery Machines:
Aventura BLMAV, Aventura II BLMAV2
Destiny BLDY, BLDY2
Ellegante BLG BLG2 BLG3
Ellageo Plus BLL BLL2
Ellisimo BLSO
Ellisimo BLSOG BLSOG2 BLSOG-NZ
Esante BLN
Flourish BLMFO, Flourish 2 BLMFO2
Solaris
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.