 |
December 21, 2024 |
Electric Bobbin Winders: Sidewinder, Corgi, Brother, PD60
Install and Adjust a Bobbin Winder for an Industrial Sewing Machine. This is just a basic how to install and adjust the basic industrial bobbin winder. I will also show some basic maintenance of the unit. Thank you so much for your support and please consider sharing my video, liking my video and subscribing to my channel. Filmed and Produced by Jason PottsHague PDB3 250gram 1/2Lb Electric Crosswound Yarn Ball Winder 110V, Tension Mast, 2 White Plastic Bobbins, Made in UK since 1981
 |
Our Price: $349.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: ON BACKORDER Condition: New In Box |
Features
ETA in 30 Days! Hague UK PDB3 - PDB 250G ELECTRIC YARN WINDER 110-120V
The PDB 250g. Electric Yarn Winder will wind up to 250 grammes or 1/2 pound, depending on the type of yarn used and comes complete with its own Tension Mast, leaving the mast on your knitting machine free to carry on knitting while you are winding. A spare Bobbin is also supplied. There is no auto switch off, so you will have to switch the yarn winder off once the bobbin is full.
The winder will be the correct voltage for the country it is being sent to, you may have to fit a suitable plug in some countries.
This is the very popular original PDB 250g. Electric Yarn Winder. First developed in 1981 and since that date 1000's have been sold in the UK and around the world. The winder simply fastens to the knitting table, the yarn is fed from the tension mast of your Knitting Machine to the winder, (alternatively a separate Tension Mast is available as an optional extra). It will wind up to 250 grams, depending on the type of Yarn used, a spare Bobbin is also supplied.
The bobbin on the winder should always be attached correctly prior to use and you can feel it lock into place so there shouldn’t be any problem with it then coming off during use.
The PDB 250g. Electric Yarn Winder will wind up to 250 grammes or 1/2 pound, depending on the type of yarn used and comes complete with its own Tension Mast, leaving the mast on your knitting machine free to carry on knitting while you are winding. A spare Bobbin is also supplied. There is no auto switch off, so you will have to switch the yarn winder off once the bobbin is full.
The winder will be the correct voltage for the country it is being sent to, you may have to fit a suitable plug in some countries.
This is the very popular original PDB 250g. Electric Yarn Winder. First developed in 1981 and since that date 1000's have been sold in the UK and around the world. The winder simply fastens to the knitting table, the yarn is fed from the tension mast of your Knitting Machine to the winder, (alternatively a separate Tension Mast is available as an optional extra). It will wind up to 250 grams, depending on the type of Yarn used, a spare Bobbin is also supplied.
The bobbin on the winder should always be attached correctly prior to use and you can feel it lock into place so there shouldn’t be any problem with it then coming off during use.
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
The PDB 250g. Electric Yarn Winder will wind up to 250 grammes, depending on the type of yarn used and comes complete with its own Tension Mast, leaving the mast on your knitting machine free to carry on knitting while you are winding. A spare Bobbin is also supplied for a total of two.REPLACING THE DRIVE BELT ON A
PDB ELECTRIC YARN WINDER or TWISTER
HUGOSHALFINCH Hugos Clear Amazing Tape 1/2'' x 50ft, No More Unraveling Thread Spools
 55640: HUGOSHALFINCH Hugos Amazing Tape 1/2'' x 50ft, No More Unraveling Thread Spools |
Our Price: $7.99 Prices are subject to change, and only current prices will be honored. Availability: OUT OF STOCK Condition: New In Box |
Features
The son of a printer, Hugo Maisnik, grew up being an inventor. After a happy accident at the print shop one day Hugo turned a plastic spill into a delightful, magical whoopsie into an amazing tape that allowed you to stretch, wrap and pull holding almost anything together with ease. From that vision Hugo's Amazing Tape was born! A no adhesive, self-clinging transparent tape that you can use for almost anything from arts and crafts for wrapping around spools of thread to jumbling cable cords for household use. Hugo's is sure to help make your life more organized and keep it simple!
Non-US Warranty: 30 days parts and labor.
AlphaSew P60999NS Electric Bobbin Thread Winder, Platform, Motor, Variable Speed Foot Control, Cords, Thread Stand, Spool Pin, For 15, 66, L Bobbins
 9633: AlphaSew P60999NS Electric Bobbin Thread Winder, Platform, Motor, Variable Speed Foot Control, Cords, Thread Stand, Spool Pin For CL15, L Bobbins |
Our Price: $124.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
May your bobbin always be Full! Not for Viking Green bobbins or Singer XL5000 6000 endless self winding bobbins. *** Won't Work For Some VIKING & PFAFF Machines.
See Description For P60999NS-V.
Note: all bobbin winders have some sort of adjustments for fill rate. The metal guide finger on this one can be reformed up or down to provide more or less fill rate. No adjustment screw on this one like there is on the built in bobbin winder limiter switches on top right of sewing machines. John
- For Most Domestic, Industrial L Bobbins.
See Description For P60999NS-V.
Note: all bobbin winders have some sort of adjustments for fill rate. The metal guide finger on this one can be reformed up or down to provide more or less fill rate. No adjustment screw on this one like there is on the built in bobbin winder limiter switches on top right of sewing machines. John
- For Most Domestic, Industrial L Bobbins.
- This compact design bobbin winder works independently of your sewing machine.
- It is the first complete and easy to use unit ever made. (Finally a bobbin winder that doesn't take an industrial engineer to run.)
- This unit includes everything you need to wind your bobbins fast and easy.
- Bobbins easily mount onto a spring type spindle.
- It comes equipped with a clear plastic safety cover for the motor and bobbin winder to prevent accidental thread tangles.
- It has a built in thread stand and it has a clip mounted on the platform for easy storage of the mast.
- The black platform is cushioned to reduce vibration.
- The thread guide is adjustable so that bobbins wind evenly.
- The friction drive pulley shuts off automatically when bobbin is full.
- Includes a high speed motor and electronic foot control.
-Bobbin easily mounts onto split spindle for adjustment
-14.5" width x 8.5" length x 4" high
-Clear plastic cover for motor and bobbin winder
-Built in spool stand and rod can be clipped into the side of the main platform
-Black platform with 4 leg cushions to reduce vibration.
-Separate P60999NS-V for Viking S205-605 sewing machine bobbins
-An adjustment lever screw can be rotated to adjust the fill level as desired.
*** Won't Work For Some VIKING & PFAFF Machines.
See Description For P60999NS-V, Or Call For Info/Details. ***
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Assembly and Use Instructions on Stand Alone Electric Bobbin WinderBOBBIN WINDER DELUXE W/MOTOR #P60999NS DETAILS
This is a compact design bobbin winder that works independently. It includes motor, electronic foot control, and built in spool stand. For Most Domestic and Industrial Bobbins, Class 66, Class 15, M Style, and L Style.
Features Include:
Bobbin easily mounts onto spring type spindle
Compact Design 14-1/2" (W) X 8-1/2"(L) X 4" (H)
Safety-Clear plastic cover for motor and bobbin winder
Built in spool stand and its rod can be clipped into the side of main platform.
Black platform with 4 leg cushions to reduce vibration.
P60999NS-V Viking Electric Automatic Bobbin Thread Winder, Platform, Motor, Variable Speed Foot Control, Cords, Thread Stand, Designer Platinum, Pfaff
9633: AlphaSew P60999NS Electric Bobbin Thread Winder, Platform, Motor, Variable Speed Foot Control, Cords, Thread Stand, Spool Pin For CL15, L, M Bobbins |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: ON BACKORDER Condition: New In Box |
Features
May your bobbin always be Full! for Viking Green bobbins.
# P60999NS-V
[VIKING ] - S205 - S605, Designer Srs., Platinun Srs.
* * * Includes Pfaff Creative Vision. * * *
# P60999NS-V
[VIKING ] - S205 - S605, Designer Srs., Platinun Srs.
* * * Includes Pfaff Creative Vision. * * *
- This compact design bobbin winder works independently of your sewing machine.
- It is the first complete and easy to use unit ever made. (Finally a bobbin winder that doesn't take an industrial engineer to run.)
- This unit includes everything you need to wind your bobbins fast and easy.
- Bobbins easily mount onto a spring type spindle.
- It comes equipped with a clear plastic safety cover for the motor and bobbin winder to prevent accidental thread tangles.
- It has a built in thread stand and it has a clip mounted on the platform for easy storage of the mast.
- The black platform is cushioned to reduce vibration.
- The thread guide is adjustable so that bobbins wind evenly.
- The friction drive pulley shuts off automatically when bobbin is full.
- Includes a high speed motor and electronic foot control.
-Bobbin easily mounts onto split spindle for adjustment
-14.5" width x 8.5" length x 4" high
-Clear plastic cover for motor and bobbin winder
-Built in spool stand and rod can be clipped into the side of the main platform
-Black platform with 4 leg cushions to reduce vibration.
-Separate Product P60999NS for Class 15A, Singer 66, Rotary L and Big M Bobbins
-An adjustment lever screw can be rotated to adjust the fill level as desired.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for Assembly and Use Instructions on Stand Alone Electric Bobbin WinderBOBBIN WINDER DELUXE W/MOTOR #P60999NS DETAILS
This is a compact design bobbin winder that works independently. It includes motor, electronic foot control, and built in spool stand.
Features Include:
Bobbin easily mounts onto spring type spindle
Compact Design 14-1/2" (W) X 8-1/2"(L) X 4" (H)
Safety-Clear plastic cover for motor and bobbin winder
Built in spool stand and its rod can be clipped into the side of main platform.
Black platform with 4 leg cushions to reduce vibration.
AB1 Automatic Bobbin Thread Winder, Heavy Duty, Auto Shut Off, Start Stop Buttons, Single Speed, Thread Cutter, Optional Single 1 Spool Thread Stand
 86797: AB-1 Electric Bobbin Thread Winder, Heavy Duty, Auto Shut Off Sensor |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Heavy duty bobbin winder that can be table mounted. Fits bobbins up to 1 1/2" diameter with center hole standard size of 1/4". Auto sensor for stop winding when bobbin is full. On/off button. Suggest 27449A single thread stand to hold spool of thread or cone. Fast, smooth and quiet.
Bobbin Winder Portable Automatic Bobbin Winder Bobbin Class15 L M Style for Juki Janome Brother Singer, etc.Quilting Embroidery Sewing Machine Bobbin Max Dia 1.1” Bobbin Hole Dia 1/4” Wide 0.46”
This machine saves a lot of time when you need to get a big project completed quickly. Runs on standard AC power. Start/stop button and light indicators as well as automatic shut off when bobbin is full.
Fits bobbins up to 1.25 inches in diameter with a standard size center hole (1/4"). Table mountable.
Bobbin Winder Work for metal bobbin maximum outside diameter 1.1 inch.Bobbin Hole Dia 1/4” Bobbin maximum wide 0.46”
Portable bobbin winder is with thread spool pin, thread guide rods, metal plate.
Electric bobbin winder, Runs on standard AC power (110 Volt). Start/stop button and light indicators as well as automatic shut off when bobbin is full.
Industrial bobbin winder with thread cutter , you can return it without asking question if you are not satisfied with it.
Automatic bobbin winder it can wind L style bobbin, class 15/A style bobbin, M style bobbin. But it cannot work with Pfaff plastic bobbin. If not evenly, you need to adjust the tension set height accordingly.
Bobbin Winder Portable Automatic Bobbin Winder Bobbin Class15 L M Style for Juki Janome Brother Singer, etc.Quilting Embroidery Sewing Machine Bobbin Max Dia 1.1” Bobbin Hole Dia 1/4” Wide 0.46”
This machine saves a lot of time when you need to get a big project completed quickly. Runs on standard AC power. Start/stop button and light indicators as well as automatic shut off when bobbin is full.
Fits bobbins up to 1.25 inches in diameter with a standard size center hole (1/4"). Table mountable.
Bobbin Winder Work for metal bobbin maximum outside diameter 1.1 inch.Bobbin Hole Dia 1/4” Bobbin maximum wide 0.46”
Portable bobbin winder is with thread spool pin, thread guide rods, metal plate.
Electric bobbin winder, Runs on standard AC power (110 Volt). Start/stop button and light indicators as well as automatic shut off when bobbin is full.
Industrial bobbin winder with thread cutter , you can return it without asking question if you are not satisfied with it.
Automatic bobbin winder it can wind L style bobbin, class 15/A style bobbin, M style bobbin. But it cannot work with Pfaff plastic bobbin. If not evenly, you need to adjust the tension set height accordingly.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
- Automatic Bobbin Winder For Sewing Machine Bobbin Winding
- Heavy duty bobbin winder that can be table mounted
- This machine saves a lot of time when you need to get a big project completed quickly. Runs on standard AC power (110 Volt). Start/stop button and light indicators as well as automatic shut off when bobbin is full. Fits bobbins up to 1-1/2" diameter with center hole standard size of 1/4".
See Videos on Heavy duty bobbin winder .
Brother PRBW1 Babylock EPBW1 Metal/Plastic Rotary L Bobbins Thread Winder PRS100 PR1X PR600's PR670 PR680 PR1000 PR1050 PR1055, BL EMP6 BMP6 BMP8 BMP9
 16229: Bobbin Thread Winder Babylock EPBW1(Brother PRBW1) for PRS100 PR600 PR670 PR1000 PR1050 PR1055 |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Includes Spool Pins, Cone Holders, Thread Spool Retention Caps, Bobbin Case Tension Weight, for Brother PQ1500, S6200A, PR600, PR650, PR1000, PRBW1 and any other sewing or embroidery machine without bobbin winder that takes standard L metal or plastic bobbins.
Brother PR Bobbin Winders are for Brother PR600 PR620 PR650 PR655 PR1000, and Babylock 6-10 Needle Embroidery Machines that do not have a built in bobbin winder... for color bobbins matching top thread.
May your bobbins always be full!
Note: Brother PR600 PR650 PR1000 Bobbin Thread Specifications from the Instruction Manuals: "When winding the bobbin, be sure to use cotton or spun polyester bobbin thread (between 74 dtex/2 and 100 dtex/2)."
Bobbin winder for the PR600 PR620 PR650 PR1000, Babylock and any L Bobbin Rotary Sewing machine, home or industrial for sewing, quilting and embroidery.
Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors, and using up bobbin thread on spools and cones.
Bobbin winder for the 6 needle series. Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors.
Can also be used with other brands of sewing machines.
Made to work with the following machines and others:
Brother PR 600, PR 600II, PR 620, PR650
Babylock EMP 6, BMP 6, BMP 8
However, the following bobbin types do not fit on this machine:
Singer Centaur II
Singer Futura
Husqvarna Viking bobbin 412 56 15-45 (green)
Husqvarna Viking bobbin 412 09 75-45
Husqvarna Viking bobbin 412 06 12-45
Pfaff Creative Vision
M Style Industrial Sewing Machine Bobbins.
Class 15 metal or plastic, SA156 Type
Bobbins and Machines Below will work with this electric bobbin winder
*Alternative Part Numbers for L bobbins Include 616513, 100376051, 111533200, 100376-053, SA159, sa163, 4160555-01, A9117-007-000 & H12413002 (AC 48794B657074, 48794B657084)
Fits Singer 20U, Consew 2033, Artidsan 2053, Yamata 20U63
Fits most high speed straight stitch and zigzag industrial sewing machines except upholstery machines
Fits brother PQ1500, Juki TL-98, Janome 1600P high speed, straight stitch portable sewing machines
Fits Riccar and domestic rotary machines.
Fits Alphasew model P20U33-3.
Fits Baby Lock models BL3000, BL4000, BL5000, BL7000, BLQP, EMP6, BMP6, BMP8, and Quilter's Choice Professional(BLQCP).
Fits Bernina Bernette models 330, 340, 430, 440, and 1000.
Fits Brother model PQ-1500 and PQ-1500S
Fits Consew models 99, 103, 105, 199R, 210, 220, 230, 231, 2230 and 292.
Fits Elna models 100, 101, 102, 103, 104 and 1000.
Fits Juki models TL98Q, TL98QE, DDL-227, DDL-555, DDL-5530, and DDL-5550.
Fits Riccar models 414, 500, 515, 525, RM540, R551, R552, 606, 650, R700, R751, 805, 888, 2600, 2950, 3400, 3600, 4001, 4003, 8400, 8500, 9150, 9160, 9600, 9700, 9800, 9900, 2800/3300, 2900/3500, 555FA, 666FA, 800R, 806/807, 808E, 906E, RE571, RE581/RE591, and RM570.
Fits Singer models 115-1, 188K, 191D300A, 20U, 20U13, 20U33, 206K, 206K25, 251, 281, 306K, 306K25, 306W, 319, 319K, 491D200, 491D300, 591D200A, and 591D300A.
See more HERE
Quilted Block using the Entrepreneur Pro PR1000e and PRBW Bobbin Winder. You can create Quilted Blocks on the Entrepreneur Pro PR1000e that look beautiful on both the front and back. The secret is to change bobbins each time the top thread color changes. In this video, Anna Aldmon shows you how easy it is to change a single needle design to a multi-needle design by adding stops for bobbin changes.
Brother PR Bobbin Winders are for Brother PR600 PR620 PR650 PR655 PR1000, and Babylock 6-10 Needle Embroidery Machines that do not have a built in bobbin winder... for color bobbins matching top thread.
May your bobbins always be full!
Note: Brother PR600 PR650 PR1000 Bobbin Thread Specifications from the Instruction Manuals: "When winding the bobbin, be sure to use cotton or spun polyester bobbin thread (between 74 dtex/2 and 100 dtex/2)."
Bobbin winder for the PR600 PR620 PR650 PR1000, Babylock and any L Bobbin Rotary Sewing machine, home or industrial for sewing, quilting and embroidery.
Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors, and using up bobbin thread on spools and cones.
Bobbin winder for the 6 needle series. Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors.
Can also be used with other brands of sewing machines.
Made to work with the following machines and others:
Brother PR 600, PR 600II, PR 620, PR650
Babylock EMP 6, BMP 6, BMP 8
However, the following bobbin types do not fit on this machine:
Singer Centaur II
Singer Futura
Husqvarna Viking bobbin 412 56 15-45 (green)
Husqvarna Viking bobbin 412 09 75-45
Husqvarna Viking bobbin 412 06 12-45
Pfaff Creative Vision
M Style Industrial Sewing Machine Bobbins.
Class 15 metal or plastic, SA156 Type
Bobbins and Machines Below will work with this electric bobbin winder
*Alternative Part Numbers for L bobbins Include 616513, 100376051, 111533200, 100376-053, SA159, sa163, 4160555-01, A9117-007-000 & H12413002 (AC 48794B657074, 48794B657084)
Fits Singer 20U, Consew 2033, Artidsan 2053, Yamata 20U63
Fits most high speed straight stitch and zigzag industrial sewing machines except upholstery machines
Fits brother PQ1500, Juki TL-98, Janome 1600P high speed, straight stitch portable sewing machines
Fits Riccar and domestic rotary machines.
Fits Alphasew model P20U33-3.
Fits Baby Lock models BL3000, BL4000, BL5000, BL7000, BLQP, EMP6, BMP6, BMP8, and Quilter's Choice Professional(BLQCP).
Fits Bernina Bernette models 330, 340, 430, 440, and 1000.
Fits Brother model PQ-1500 and PQ-1500S
Fits Consew models 99, 103, 105, 199R, 210, 220, 230, 231, 2230 and 292.
Fits Elna models 100, 101, 102, 103, 104 and 1000.
Fits Juki models TL98Q, TL98QE, DDL-227, DDL-555, DDL-5530, and DDL-5550.
Fits Riccar models 414, 500, 515, 525, RM540, R551, R552, 606, 650, R700, R751, 805, 888, 2600, 2950, 3400, 3600, 4001, 4003, 8400, 8500, 9150, 9160, 9600, 9700, 9800, 9900, 2800/3300, 2900/3500, 555FA, 666FA, 800R, 806/807, 808E, 906E, RE571, RE581/RE591, and RM570.
Fits Singer models 115-1, 188K, 191D300A, 20U, 20U13, 20U33, 206K, 206K25, 251, 281, 306K, 306K25, 306W, 319, 319K, 491D200, 491D300, 591D200A, and 591D300A.
See more HERE
Quilted Block using the Entrepreneur Pro PR1000e and PRBW Bobbin Winder. You can create Quilted Blocks on the Entrepreneur Pro PR1000e that look beautiful on both the front and back. The secret is to change bobbins each time the top thread color changes. In this video, Anna Aldmon shows you how easy it is to change a single needle design to a multi-needle design by adding stops for bobbin changes.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Using the Optional Bobbin Winder Instructions on Pages 277-281 in Brother PR Manuals.Compatible Standard L bobbins fit the following machines
Compatible with Babylock Sewing Machine Models:
BL500A (Jane), BL3000, BL4000, BL5000, BL5020, BL7000, BLQP, EMP6 & Nouvelle 1500S
Compatible with Bernette Sewing Machine Models:
320, 330, 340, 430 & 440
Compatible with Bernina Sewing Machine Models:
1000, 1000+ & 1001.
Compatible with Brother Sewing Machine Models:
8015, PQ1500, PR-600II, PR-620, XL700 & XL703.
Compatible with Consew Sewing Machine Models:
210, 220, 230, 2230, 231, 99, 103, 105, 292 & 199R.
Compatible with Elna Sewing Machine Models:
100, 101, 102, 103, 104 & 1000.
Compatible with Husqvarna Viking Sewing Machine Models:
2780, 2840 & Mega Quilter.
Compatible with Juki Sewing Machine Models:
DDL-555, DDL-227, DDL-5530, DDL-5550, TL-98E, TL-98P, TL-98Q, TL-98QE, TL-2000Qi & TL-2010Q.
Compatible with Necchi Sewing Machine Models:
543 & Mirella.
Compatible with Pfaff Sewing Machine Models:
1200 Grand Quilter.
Compatible with Some Rotary Kenmore Sewing Machine Models.
Compatible with Riccar Sewing Machine Models.
777, R550, R570, R572, R650, R651, R751, RE571, RE640 & 2900.
Compatible with Singer Sewing Machine Models:
20U, 20U73, 20U73B, 20U83 and 20U83B, 251, 281, 20U33, 319, 206K, 306K & 306W.
Compatible with Riccar Sewing Machine Models:
414, 420, 500, 515, 525, 551, 555FA, 606, 666FA, 800R, 805, 806, 807, 808E, 888, 906E, 2600, 2800, 2900, 2950, 3300, 3400, 3500, 3600, 4001, 4003, 8400, 8500, 9150, 9160, 9600, 9700, 9800, 9900, R551, R552, R650, R651, R750, R751, RE571, RE570, RE580, RE581, RE591, RE640, RM540 & RM570.
Compatible with White Sewing Machine Models:
8000. - See more HERE
AlphaSew 27449 Single Cone Vertical Thread Stand, Metal Spool Pin, Metal Rod, Heavy Duty Cast Iron Base, Must Put the 3 Pieces Together
 23376: Single Cone Vertical Thread Stand, Metal Spool Pin/Rod, Cast Iron Base |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
For all portable embroidery machines when using any cone threads that do not work on horizontal or vertical spool pins mounted on the machine, causing snags and thread breaks.
Prevents thread from catching and breaking on conventional spools, spool pins, spool holders, and thread guides, especially when using cone threads for single needle embroidery machines, which should not be used directly on machine vertical or horizontal spool holders, unless they are designed to, such as Juki TL98, Brother PQ1500S, Janome 1600P, MC6500, MC6600, and multi-needle embroidery machines.
# 27449
- 1 SPOOL
- 4-3/4" Diameter.
- CAST IRON BASE
- Metal base.
- Holds any size from mini cone to industrial size thread cones.
Whenever you use any kind of cone shaped thread spools on home embroidery machines, you should put them on a separate vertical spool thread stand* set up on your table to the right of the hand wheel for smooth thread delivery. Putting cone thread on the machine's horizontal or vertical spool pin can cause thread to get caught on the spool, spool pin, thread cap, under the spool, or on the next thread guide.
Prevents thread from catching and breaking on conventional spools, spool pins, spool holders, and thread guides, especially when using cone threads for single needle embroidery machines, which should not be used directly on machine vertical or horizontal spool holders, unless they are designed to, such as Juki TL98, Brother PQ1500S, Janome 1600P, MC6500, MC6600, and multi-needle embroidery machines.
# 27449
- 1 SPOOL
- 4-3/4" Diameter.
- CAST IRON BASE
- Metal base.
- Holds any size from mini cone to industrial size thread cones.
Whenever you use any kind of cone shaped thread spools on home embroidery machines, you should put them on a separate vertical spool thread stand* set up on your table to the right of the hand wheel for smooth thread delivery. Putting cone thread on the machine's horizontal or vertical spool pin can cause thread to get caught on the spool, spool pin, thread cap, under the spool, or on the next thread guide.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
- 4-3/4" Diameter.- Metal base.
- Holds any size from mini cone to industrial size thread cones.
AlphaSew 27449-ADJ Superior METALSTAND-ADJ Adjustable Height Single Cone Vertical Thread Stand, Metal Spool Pin, Rod, Weighted Base
 93650: AlphaSew 27449-ADJ Adjustable Height Single Cone Vertical Thread Stand, Metal Spool Pin Rod, Weighted Base |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The telescopic stand can be lowered down to 6" or raised all the way up to 15".
Alphasew's Adjustable Spool Stand is ideal for both sewing and serger machines. The weighted base will keep your thread from sliding and moving around. From base to tip the spool stand measures 15" and the foundation piece weighs 6.9 oz.
For all portable embroidery machines when using any cone threads that do not work on horizontal or vertical spool pins mounted on the machine, causing snags and thread breaks.
Prevents thread from catching and breaking on conventional spools, spool pins, spool holders, and thread guides, especially when using cone threads for single needle embroidery machines, which should not be used directly on machine vertical or horizontal spool holders, unless they are designed to, such as Juki TL98, Brother PQ1500S, Janome 1600P, MC6500, MC6600, and multi-needle embroidery machines.
Whenever you use any kind of cone shaped thread spools on home embroidery machines, you should put them on a separate vertical spool thread stand* set up on your table to the right of the hand wheel for smooth thread delivery. Putting cone thread on the machine's horizontal or vertical spool pin can cause thread to get caught on the spool, spool pin, thread cap, under the spool, or on the next thread guide.
Alphasew's Adjustable Spool Stand is ideal for both sewing and serger machines. The weighted base will keep your thread from sliding and moving around. From base to tip the spool stand measures 15" and the foundation piece weighs 6.9 oz.
For all portable embroidery machines when using any cone threads that do not work on horizontal or vertical spool pins mounted on the machine, causing snags and thread breaks.
Prevents thread from catching and breaking on conventional spools, spool pins, spool holders, and thread guides, especially when using cone threads for single needle embroidery machines, which should not be used directly on machine vertical or horizontal spool holders, unless they are designed to, such as Juki TL98, Brother PQ1500S, Janome 1600P, MC6500, MC6600, and multi-needle embroidery machines.
Whenever you use any kind of cone shaped thread spools on home embroidery machines, you should put them on a separate vertical spool thread stand* set up on your table to the right of the hand wheel for smooth thread delivery. Putting cone thread on the machine's horizontal or vertical spool pin can cause thread to get caught on the spool, spool pin, thread cap, under the spool, or on the next thread guide.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
- 4-3/4" Diameter.- Weighted base.
- Holds any size from mini cone to industrial size thread cones.
Hashima HW-40C-HAS 4-Thread Commercial Cone Unwinder and Spool Winder
 21526: Hashima HW-40C-HAS 4-Thread Commercial Cone Unwinder and Spool Winder |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: OUT OF STOCK Condition: New In Box |
Features
- One action type bobbin stopper
- Easy adjustment of the thread-winding volume of thread is controlled by a timer
- Small size and light weight
- The intermittent switch allows simple winding start setting
- High-speed four bobbins winding assures the prompt, Convention of a large volume of thread to bobbins
HASHIMA HW-40C Winding Video
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Brochure on Models of Hashima High Speed Winders available from the factoryInstruction Manual on HW-40 Hashima High Speed Winder available in the USA
-
Model: HW-40C
-
Power: Single phase
-
Output: 80W
-
Timer: 15min
-
Speed: 1,380r.p.m
-
Traverse: 97mm
-
Dimensions: 490(D)×660(W)×950(H)mm
-
Weight (approx.): 25kg (55 lbs)
-
Voltage: 110V
HASHIMA USED TO PREPARE SPECIAL SPECIFICATION HW-40 WITH 2.5 INCH CONE FOR USA CUSTOMER. NOW, DUE TO VERY LIMITED DEMAND FOR THE SPECIFICATION, HASHIMA PREPARE ONLY 1 SPECIFICATION OF 4 INCH (100mm) CONES WITH TRAVERS OF ABOUT 95mm ONLY.
Towa Griswold BTG1 TM1, L Style Metal Bobbin-Case Thread Tension Gauge 0-400g Pull for Front, Side Load, Brother PR, Etc. Not Top Drop in Bobbin Cases
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
*Takes the guesswork out of measuring 0-400 grams of thread tension pull from L type bobbin case. Used with bobbin cases: 52237, 541678, B75, KF220370, B1837-027-0A0, 117596-0-01, Etc.
The Towa BTG1 is a BOBBIN CASE TENSION GAUGE STND CAP TM-1 (use with bobbin case BC-HR, BC-DBI and BC-DBZ). Used with the following bobbin cases: 52237, 541678, B75, KF220370, B1837-027-0A0, 117596-0-01, XC7206001 & 2-20
The Towa BTG1 is a BOBBIN CASE TENSION GAUGE STND CAP TM-1 (use with bobbin case BC-HR, BC-DBI and BC-DBZ). Used with the following bobbin cases: 52237, 541678, B75, KF220370, B1837-027-0A0, 117596-0-01, XC7206001 & 2-20
- L type bobbin tension gauge
- for industrial sewing machines
- for many longarm quilting machines using the "L" bobbin
With the Towa Bobbin Case Tension Gauge the guess work is gone forever. This gauge allows embroiderers to consistently set accurate embroidery bobbin case tension. In just a few seconds you can verify your bobbin tension is where it should be to achieve optimum results. It's simple to use and comes with complete instructions. No setup is required. It's ready to use right out of the box.
How to Use a Bobbin Tension Gauge
Take the guess work out of setting thread tensions.
Using thread tension gauges makes it easy to adjust both bobbin and upper tensions. It's quick, easy and will help you eliminate unsightly bobbin thread showing on top, looping top stitches and thread breaks. Your embroidery will look its best with consistent, balanced thread tensions. Here's how to use a bobbin tension gauge to take the tension out of setting tensions!
Instructions for Use:
- Remove the bobbin case from your machine. Be sure the bobbin thread is out of the pigtail and place your bobbin case with the bobbin in it into the gauge slot. Snap the bobbin case in place.
- Wrap the bobbin thread around the two pulley wheels and around the plastic hook end on the gauge.
- Steadily pull the thread and note the reading on the gauge. This represents tension readings in grams. Correct bobbin tensions should be 180 to 220 grams (up to 250 grams when embroidering caps).
- Please Note: If your gauge is shown in units of 10's, the correct bobbin tensions should be 18 to 22 grams (up to 25 grams when embroidering caps.)
- Adjust the bobbin case spring tension screw as needed to get the desired reading.
Note: The gauge needle should provide a steady reading. If you experience a bouncing, erratic reading it can bedue to a dirty or defective bobbin case.
Tip: Slide a business card back and forth under the bobbin tension spring to clear any dirt.
Once you have adjusted your thread tensions, it's always a good idea to run tests.
- First run a fill stitch test pattern.
- If you experience any top stitch looping, slowly tighten the main upper tension knob until this looping goes away (looping can also occur if your bobbin tension is too tight).
- Proper tensions for satin stitches should reveal 1/3 bobbin and 2/3 top thread color on the underside of the embroidery.
Note: Too much bobbin showing on the underside and/or showing on the topside usually means either the bobbin tension is too loose or the top thread tension is too tight.
Brother Thread Tensions PDF for All Machines
Common Singer Bobbin Cases & Bobbin Case Tension: Sunday Morning Quickies September 19, 2021 by Bob Fowler
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
The Towa BTG1 is a BOBBIN CASE TENSION GAUGE STND CAP TM-1 (use with bobbin case BC-HR, BC-DBI and BC-DBZ). Used with the following bobbin cases: 52237, 541678, B75, KF220370, B1837-027-0A0, 117596-0-01, XC7206001 & 2-20Compatible with Babylock Sewing Machine Models:
BL500A (Jane), BL3000, BL4000, BL5000, BL5020, BL7000, BLQP, EMP6 & Nouvelle 1500S
Compatible with Bernette Sewing Machine Models:
320, 330, 340, 430 & 440
Compatible with Bernina Sewing Machine Models:
1000, 1000+ & 1001.
Compatible with Brother Sewing Machine Models:
PQ1500, PR-600II, PR-620, PR-650, XL700 & XL703.
Compatible with Consew Sewing Machine Models:
210, 220, 230, 2230, 231, 99, 103, 105, 292 & 199R.
Compatible with Elna Sewing Machine Models:
100, 101, 102, 103, 104 & 1000.
Compatible with Husqvarna Viking Sewing Machine Models:
2780, 2840 & Mega Quilter.
Compatible with Juki Sewing Machine Models:
DDL-555, DDL-227, DDL-5530, DDL-5550, TL-98E, TL-98P, TL-98Q, TL-98QE, TL-2000Qi & TL-2010Q.
Compatible with Necchi Sewing Machine Models:
543 & Mirella.
Compatible with Pfaff Sewing Machine Models:
1200 Grand Quilter.
Compatible with Some Rotary Kenmore Sewing Machine Models.
Compatible with Riccar Sewing Machine Models.
777, R550, R570, R572, R650, R651, R751, RE571, RE640 & 2900.
Compatible with Singer Sewing Machine Models:
20U, 20U73, 20U73B, 20U83 and 20U83B, 251, 281, 20U33, 319, 206K, 306K & 306W.
Compatible with Riccar Sewing Machine Models:
414, 420, 500, 515, 525, 551, 555FA, 606, 666FA, 800R, 805, 806, 807, 808E, 888, 906E, 2600, 2800, 2900, 2950, 3300, 3400, 3500, 3600, 4001, 4003, 8400, 8500, 9150, 9160, 9600, 9700, 9800, 9900, R551, R552, R650, R651, R750, R751, RE571, RE570, RE580, RE581, RE591, RE640, RM540 & RM570.
Compatible with White Sewing Machine Models:
8000.
Compatible with Bernina (Bernette) Sewing Machine Models:
320, 330, 340, 430, & 440
Compatible with Brother Sewing Machine Models:
Pacesetter, Rotary XL2005, XL4001, XL5001 & M870
Compatible with Singer Sewing Machine Models:
Quantum CXL, Quantum XL-1, Quantum XL-10 & Quantum XL-50
Compatible with Pfaff Sewing Machine Models:
75, 77, 78, 79, 84, 85, 86, 87, 90, 91, 92, 93, 94, 95, 96, 97, 118, 130, 138, 229, 234, 238, 259, 260, 262, 284, 285, 285-1, 294, 295, 295-1, 296, 296-1, 297, 297-1, 331, 332, 333, 335, 360, 362, 368, 437, 438, 439, 460, 463, 480, 801, 803, 806, 807, 809, 875, 876, 904, 905, 906, 907, 916, 917, 919, 919-1, 927, 933, 935, 939, 946, 947, 953, 955, 975, 1011, 1013, 1014, 1015, 1018, 1019, 1027, 1029, 1035, 1037, 1047, 1050, 1051, 1067, 1069, 1071, 1147, 1150, 1151, 1171, 1196, 1197, 1199, 1209, 1211, 1212, 1213, 1214, 1215, 1216, 1217, 1221, 1222, 1222E, 1222SE, 1229, 1371, 1467, 1469, 1471, 1472, 1473, 1473CD, 1475, 1475CD, 1520, 1522, 1523, 1524, 1525, 1526, 1527, 1528, 1529, 1530, 1536, 1538, 1540, 1546, 1548, 2010, 2012, 2014, 2020, 2022, 2024, 2025, 2026, 2027, 2028, 2029, 2030, 2032, 2034, 2036, 2038, 2040, 2042, 2044, 2046, 2048, 2054, 2056, 2058, 2124, 2134, 2140, 2144, 2170, 6085, 6086, 6091, 6110, 6112, 6120, 6122, 6150, 6152, 6230, 6232, 6250, 6252, 6270, 7510, 7530, 7550, 7560, 7562, 7570, Select 2.0, Select 3.0 and Select 4.0.
Compatible with other models of industrial and home sewing machines.
Able : HB-480
Alfa : 102, 109
Brudan : BEAM, BEAT, BEH, BEJ, BEJM-UF, BEL BELL, BEM, BEMR, BEMS, BEMX, BESR, BEU, BEUF, BEX
Brother : TA1-B621, TA2-B621, B622, B623, TZ1-B651, B652, M870, PQ1300, PQ1500, XL622, XL702, XL703, XL2005, XL2015, XL4001, XL5001, XL8015
Columbia : N430,-2
Consew : 99, 100, 101, 103, 105, 210, 218, 219, 220, 230, 290, 290G, 290M, 310
Durkopp : 203, 204, 205, 206, 207, 211, 212, 213, 215, 216, 218, 261, 265-101, 270, 15135
Feiyue : GC15-1, GC15-3
Golden Wheel : CS-335B, CS-335BH, 1100F, H, S, 3600, 8000-20, 8000-25, 8000-30
Husqvarna : 27, 263
Click Here to View a Troubleshooting Guide for Thread from Superior Thread Company(.PDF)
Click Here to View a Troubleshooting Guide for Thread from Superior Thread Company(.PDF)
Janome : 1600P-DB, 1600P-DBX
Juki : LK-232, LK-322, LZ-271, LZ-391, TL-72, TL-82, TL-98E, TL-98Q, TR-7
Riccar : RD-101, RD-102, RT-5, 540, 555, 888
Singer : 20U, 103, 188K, 188U, 191D, 191U, 203, 206K, 291U, 491D, 491U, 591C308A. 591U, 691D, 2491D
Sunstar : KLZ-371, KM-123A, KM-123B
Taking : TK-88, 652
Tajima : TM, TMB, TMBE, TMBW, TME, TMEF, TMEG, TMEX, TMF, TMFD, TMLE
Unicorn : DB2-H310, DB2-H311, DB2-H510, LZ2-H272
Viking : 33, 278
White : 710, 1164
Towa BTG2 TM2, Class 15A Bobbin-Case Thread Tension Gauge, 0-400g Pull for Shuttle Type Hook, not Drop In Bobbin Cases
|
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
*Takes the guesswork out of measuring 0-400 grams of thread tension pull from Class 15 type bobbin case which fits most oscillating shuttle sewing machines.
Alternative Part Numbers for Class 15 Bobbin Cases Include 8541, 532504209, 301515304, 93-414031-95, 60404, 47910, 174771, 170341, 128582023, 60415, 152, 6510, 301515201, 128582001, 406104, 647515006, JO1313-S, JO1313Z3, 81417, 81901, H71186001, 647515006, 76326, 395710-08, 176786, 177487, 176772, 176786, 177487, 176772, 402784, 76326, H71185000, 549834, 128582053, 200909107, 128582083,366413003, 6510, 403195, 395710-10, 395710-03, 395710-18 and 416153401
The Towa BTG2 is a BOBBIN CASE TENSION GAUGE STND CAP TM-2
Alternative Part Numbers for Class 15 Bobbin Cases Include 8541, 532504209, 301515304, 93-414031-95, 60404, 47910, 174771, 170341, 128582023, 60415, 152, 6510, 301515201, 128582001, 406104, 647515006, JO1313-S, JO1313Z3, 81417, 81901, H71186001, 647515006, 76326, 395710-08, 176786, 177487, 176772, 176786, 177487, 176772, 402784, 76326, H71185000, 549834, 128582053, 200909107, 128582083,366413003, 6510, 403195, 395710-10, 395710-03, 395710-18 and 416153401
The Towa BTG2 is a BOBBIN CASE TENSION GAUGE STND CAP TM-2
- Class 15 type bobbin case thread tension gauge
- for most mechanical oscillating shuttle home sewing machines
With the Towa Bobbin Case Tension Gauge the guess work is gone forever. This gauge allows embroiderers to consistently set accurate embroidery bobbin case tension. In just a few seconds you can verify your bobbin tension is where it should be to achieve optimum results. It's simple to use and comes with complete instructions. No setup is required. It's ready to use right out of the box.
How to Use a Bobbin Tension Gauge
Take the guess work out of setting thread tensions.
Using thread tension gauges makes it easy to adjust both bobbin and upper tensions. It's quick, easy and will help you eliminate unsightly bobbin thread showing on top, looping top stitches and thread breaks. Your embroidery will look its best with consistent, balanced thread tensions. Here's how to use a bobbin tension gauge to take the tension out of setting tensions!
Instructions for Use:
- Remove the bobbin case from your machine. Be sure the bobbin thread is out of the pigtail and place your bobbin case with the bobbin in it into the gauge slot. Snap the bobbin case in place.
- Wrap the bobbin thread around the two pulley wheels and around the plastic hook end on the gauge.
- Steadily pull the thread and note the reading on the gauge. This represents tension readings in grams. Correct bobbin tensions should be 180 to 220 grams (up to 250 grams when embroidering caps).
- Please Note: If your gauge is shown in units of 10's, the correct bobbin tensions should be 18 to 22 grams (up to 25 grams when embroidering caps.)
- Adjust the bobbin case spring tension screw as needed to get the desired reading.
Note: The gauge needle should provide a steady reading. If you experience a bouncing, erratic reading it can bedue to a dirty or defective bobbin case.
Tip: Slide a business card back and forth under the bobbin tension spring to clear any dirt.
Once you have adjusted your thread tensions, it's always a good idea to run tests.
- First run a fill stitch test pattern.
- If you experience any top stitch looping, slowly tighten the main upper tension knob until this looping goes away (looping can also occur if your bobbin tension is too tight).
- Proper tensions for satin stitches should reveal 1/3 bobbin and 2/3 top thread color on the underside of the embroidery.
Note: Too much bobbin showing on the underside and/or showing on the topside usually means either the bobbin tension is too loose or the top thread tension is too tight.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click Here to View a Troubleshooting Guide for Thread from Superior Thread Company(.PDF)
Compatible with Alphasew Sewing Machine Models:
PW200, PW200-ZZ, PW400 & PW400-ZZ.
Compatible with Atlas Sewing Machine Models:
FA695.
Compatible with Babylock Sewing Machine Models:
B15, B17, BL16, BL18, BL18A - Natalie, B21, BL22, BL200, BL500, BL702, BL713, BL722, BL1000, BL1050, BL1108, BL1170, BL1400, BL1500, BL1550, BL1556, BL1750, BL2000, BL2160, BL2200, BL2400, BL2500, BL2600, BL2800, BL3500 & BL5500.
Compatible with Belvedere Sewing Machine Models:
Featherlite 110 Rocket & SP-82706.
Compatible with Bernette Sewing Machine Models:
410, 420, 430, 440, 715, 730 & 740E.
Compatible with Bernina Sewing Machine Models:
204-213 & 317-380.
Compatible with Brother Sewing Machine Models:
268, 1351, 191, 320, 360, 451, 461, 641, 651 (Charger), 661, 666FB, 681, 741, 751, 761, 1681, 1781 Riviera, 7029, 991, LS-1217, JS-23, LS-30, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125, LS-2125b, LS-2125i, LS-2129, LS-2130, LS-2150, LS-2160, LS-2220, LS-2250PRW, LS-2720, LS-2725, LS-2820, LS-2825, LS-2920, LX-2500, LX-3125, LX-3125e, PS1200, RS15, RS25, RS35, SL-7, VX1010, VX1020, VX1120, VX1125, VX1140, VX520, VX540, VX560, VX620, VX640, VX660, VX707, VX710, VX757, VX760, VX780, VX800, VX807, VX808, VX809, VX810, VX880, VX890, VX920, VX940, VX950, VX970, VX980, VX1100, VX1200, VX1435, PX100, PX150, PX200, PX300, XL Series, XL1351, XL1561, XL1781, XL4010, XL4020, XL4030, XL4050, XL4060, XL4040, XL2010, XL2015, XL2021, XL2022, XL2025, XL2027, XL2030, XL3010, XL3022, XL3025, XL3027, XL3030, XL3100, XL3200, XL3750, XL5010, XL5200, XL5232, XL5300, XL5340, XL5500, XL5600, XL5700, XL5011, XL5012, XL5020, XL5030, XL5060, XL5070, XL5100, XL5130, XL5021, XL5022, XL5031, XL5032, XL5050, XL711, XL781, XL791, XL851, XR23, XR29, XR31, XR33, XR34, XR35, XR37, XR40 & X-5.
Compatible with Dressmaker Sewing Machine Models:
205, 495, 6102FA, 7000FB, S-1000, S-3000 & SWA-2000.
Compatible with Dial Sew Sewing Machine Models:
916FB
Compatible with Domestic Sewing Machine Models:
1630, 1665
Compatible with Elna Sewing Machine Models:
110, 120, 130, 140, 149, 150, 200, 220, 225, 230, 240, 250, 255, 255i, 305, 410, 1000 (Sew Fun), 1010, 2002, 2004, 2006, 2100, 2110, 2130, 2300
Compatible with Euro Pro, Omega, Shark Sewing Machine Models:
362C, 384, 420, 801B, 991, 1262, 1262D, 7133, 7142, 9110, 9125, & 50-1262D.
Compatible with Home Maker Sewing Machine Models:
2345-TW
Compatible with Good House Keeper Sewing Machine Models:
555.
Compatible with Husqvarna Viking Sewing Machine Models:
E20, S140 & S160.
Compatible with Janome & New Home Sewing Machine Models:
100, 105, 106, 108, 110, 2003P, 2212, 300, 3125, 344, 352, 372, 373, 393, 415, 419S, 423S, 436, 444, 446, 4612, 532, 534, 535, 540, 541, 542, 543, 544, 545, 552, 556, 574, 592, 605, 608, 609, 611, 618, 619, 620, 622, 623, 624, 625FA, 626, 628, 632, 640, 641, 642, 655, 656A, 656B, 657, 657A, Jem Gold 660, 670, 672, 692, 792, 808, 844, 900, 910, 920, 980, 990, 1004, 1008, 1014, 1018, 1308, 1312, 1406, 1408, 1410, 1504, 1506, 1508, 1510, 1512, 1518, 1550, 1560, 1570, 1571, 1580, 1585, 1612, 1622, 1714, 1722, 1780, 1803, 1804, 1806, 1810, 1812, 1814, 1816, 1818, 1822, 1918, 2039, 2041, 3125, 3822, 11558, ENX24, Combi, Combi-10, HD1000, HF107, Schoolmate S-3015, TB-12, 200, 392, 1018S, 1022, 1304, 1306, 1310, 2003, ENX24, COMBI, COMBI-10, J3-18, J3-20, J3-24, NOV3000, NOV4000, RX18s, XL11
Compatible with Juki Sewing Machine Models:
HZL-25Z.
Compatible with JC Penney Sewing Machine Models:
6912, 6923, 1710, 6948A, & 7029.
Compatible with Kenmore (Sears) Sewing Machine Models:
5186, 117.740, 148.12140, 148.12170, 148.12181, 148.13100, 148.13101, 148.14220, 148.15210, 148.15600, 158.921, 158.10301, 158.10401, 158.10691, 158.12110, 158.13400, 158.13471, 158.13580, 158.17741, 158.321, 158.471, 158.14100, 158.14510, 158.15510, 158.1561281, 158.16250, 158.17012, 158.17511, 158.17530, 158.17570, 158.17600, 158.18023, 158.18032, 158.19131, 158.19142, 158.19400, 158.19412, 158.480, 158.523, 158.900, 158.1340180, 385.10111, 385.11101, 385.11206, 385.11607, 385.11608, 385.11682, 385.12014, 385.12102, 385.12116, 385.12216, 385.12314, 385.12318, 385.12332, 385.12390, 385.12490, 385.12491, 385.12492, 385.12493, 385.12514, 385.12545, 385.12581, 385.12612, 385.12614, 385.12618, 385.12712, 385.12714, 385.12781, 385.12812, 385.12814, 385.12912, 385.12916, 385.12049, 385.15008, 385.152184, 385.15358, 385.15510, 385.15512, 385.15516, 385.15518, 385.11608490, 385 1249180, 385.1249380 & 385.1264180
Compatible with Montgomery Wards Sewing Machine Models:
UHT J265C, UHT J240A, UHT J1859 & UHT J1944.
Compatible with Morse Sewing Machine Models:
600, 4300, 4400, Duo-Matic, MZZ, Power Stitch & Zig Zag.
Compatible with Necchi Sewing Machine Models:
108, 520, 522, 523, 524FB, 525FA, 534FA, 534 Supernova Julia, 535FA, 536, 537FA, 537L, 538, 539, 541, 543, 554, 574FB, 575FA, 4795, 3102FA, 3204FB, 3354, 3355, 3537, 4575, 4595, 4795, 6010FB, 6011, 6018, 7020, A709-5, 802, 3101FA, 3102FA, 3204FB, 3205FA 3537, 4575, EX1, Julia, Mira, Supernova, Supernova Ultra Mark 2, BF Nova, BU Nova, European, BU Mira
Compatible with Nelco Sewing Machine Models:
6102FB, A-3, A-509-3, F-600, JA38, N-250B4, R-400, R-1000, R-2000, R-3000, R-4000, SZA-525, SZA800-L, SZA-820-L2 & ZBB-1
Compatible with Precision Sewing Machine Models:
901
Compatible with Pfaff Sewing Machine Models:
139, 204, 205, 206, 207, 208, 209, 210, 211, 268, 269, 301, 521, 541, 721, 741, 1020, 1022, 1030, 1032, 1040, 1042, 4240, 4250, 4260, hobby 1022, hobby 1030, hobby 1032 & hobby 1042.
Compatible with Riccar Sewing Machine Models:
601, 608, 706, 707, 777, 900, 925, 1900, 1925, 2910, 2925, 7500, 469FA, 555FA, 555FB, 555SU, 666SU, 808E, R1100, R1500, R1570, R1570FB, R1800, R1850, R1950, R200, R250, R700, R7620, REC5900, RZ108B & SZ702.
Compatible with Singer Sewing Machine Models:
15-30, 132, 132Q, 140Q, 227, 228, 237, 239, 1105, 1107, 1116, 1120, 1130, 1507, 1525, 1725, 1732, 1748, 2050, 2250, 2259, 2263, 2273, 2300, 3001, 3002, 3003, 3004, 3005, 3011, 3012, 3013, 3014, 3015, 3207, 3214, 3208, 3116, 3221 Simple, 3232 Simple, 4001, 4002, 4005, 4006, 4009, 4011, 4012, 4015, 4016, 4019, 4022, 5101, 5102, 5107, 5122, 5123, 5124, 5127, 5522, 5528, 8280, 5500, 8770, 6199, 30215, 30518 and Featherweight Plus 324.
Compatible with Simplicity Sewing Machine Models:
S02, S110, S210, SL237, SL415, SL1000, SL1150, SL1170, SL1200, SL1220, SL1250, SL1270, SL1400, SL1500, SL1650, SL2507, SL4700, SL6220, SL8020, SL8130, SL8220, SL9000, SL9130, SL9150, SL9240, SW210, SW2145, SA2200 S07, S110, S210, SA1100, SA1500, SA1600, SA2200 & SW2145.
Compatible with Tacony Sewing Machine Models:
S05, 301Z, 303SS, 504,514, 580, 590, 601, 603, 608,653, 663, 670, 693, 701, 703,752, 753, 762B, 762W, 763, 793FA793, FA524, FA580, FA590, FA602, FA670, FA693 & FA870.
Compatible with Toyota Sewing Machine Models:
6004
Compatible with Universal Sewing Machine Models:
KNS & UNL-60.
Compatible with Viking Sewing Machine Models:
140, 145 (Meister), 160, 165 (Meister), 207 (Husky Star), 208 (Star), 209 (Star), 210 (Star), 211 (Star), 212 (Star), 213 Star, 214 (Star), 215 (Star), 220 (Star), 230, 350, 400, 1140, 4100, 4300, 4500 & 4700
Compatible with White Sewing Machine Models:
221N, 263, 2838, 312, 463, 527, 565, 568, 578, 620, 622, 651, 656, 664, 671, 672, 693FA, 764, 769, 804, 816, 844, 944, 955, 960, 967, 970, 976, 999, 1122, 1066, 1079, 1080, 1088, 1099, 1210, 1365, 1405, 1409, 1415, 1418, 1425, 1466, 1477, 1488, 1505, 1510, 1515, 1525, 1563, 1588, 1599, 1632, 1666, 1710, 1760, 1766, 1787, 1788, 1805, 1810, 1866, 1927, 1955, 1977, 1999, 2134, 2200, 2335, 2360, 2932, 3355, 4040, 301, 305, 310, 323, 346, 500, 510, 530, 1407, 1410, 1411,1620, 1630, 1665, 1730, 1888, 1911, 1919, 1975, 3032, 3955, 4000, 4041, 4042, 4050, 4060, 4400, 5000, 4075
Brother Thread Tensions PDF for All Machines
Common Singer Bobbin Cases & Bobbin Case Tension: Sunday Morning Quickies September 19, 2021 by Bob Fowler
Towa DTM-A1 Digital Thread Tension Gauge Complete for L Metal Bobbin Case, 0-500g Pull, TM501 L Bracket Installed
 |
Our Price: $179.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The range of this tension gauge can be measured from 10mN(1gf)-5,000mN(500gf).
So, it is possible to measure a high range of tension. (mN or gf selected by switch.)
Too fast of a thread pull will cause the tension reading to go up to fast. Pull slowly. .
So, it is possible to measure a high range of tension. (mN or gf selected by switch.)
Too fast of a thread pull will cause the tension reading to go up to fast. Pull slowly. .
- Compact design with easy-to-read LED display
- Provides 12-times the measuring range of analog Towa units
- Measures tension of both bobbin case thread and upper thread with one compact unit
- Battery operated (3 AAA batteries, not included)
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Click Here to View a Troubleshooting Guide for Thread from Superior Thread Company. This is for the similar old style bobbin case tension gauge without digital readout.(.PDF)Brother Thread Tensions PDF for All Machines
DTN-100G Professional Top Thread and Bobbin Case Thread Dial Tension Gauge (Needle Position Type) JAPAN, for All Home and Industrial Sewing Machines
 89127: DTN-100G Professional Top and Bobbin Case Thread Tension Gauge |
Our Price: $169.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
This is a gauge that is used to measure thread tension for sewing machines. Simply wrap the thread around the spindle and pull. The gauge will give you a very accurate reading of the pressure being exerted on the thread. No bouncing like a spring gauge.
Non-US Warranty: 30 days parts and labor.
Specifications
Specificationk:Product name: Dial Tension Gauge
Model: DTN-100G
Brand: Teclock
Measuring range: 10gf-100gf
Graduation: 5gf
Accuracy: ±1/2 Graduation
Weight: 56g
Teclock Precision Measuring Instrument
Teclock DTN100G Tension Gauge - Only Videos Online
Common Singer Bobbin Cases & Bobbin Case Tension: Sunday Morning Quickies September 19, 2021 by Bob Fowler
Towa Griswold BTG3 400TM3 M Size Bobbin Case Thread Tension Gauge 0-400g Pull For Industrial Sewing Embroidery Quilt Machines Not Drop In Bobbin Cases
 32469: Juki 400TM3 Towa Griswold BGT3 BTG-3 TM-3, M Bobbin Case Thread Tension Gauge |
Our Price: $62.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Takes the guesswork out of measuring 0-400 grams of thread tension pull from bobbin case.. Use for bobbin cases: 18045, P413830, H-15, B1837-201-0A0 & 147790-0-01
The Towa BTG3 product is a BOBBIN CASE TENSION GAUGE LRG CAP TM-3.
This gauge allows embroiderers to consistently set accurate embroidery bobbin case tension on style M jumbo embroidery bobbin cases. With the Towa Bobbin Case Tension Gauge the guess work is gone forever. In just a few seconds you can verify your bobbin tension is where it should be to achieve optimum results. It's simple to use and comes with complete instructions. No setup is required. It's ready to use right out of the box.
Used with the following bobbin cases: 18045, P413830, H-15, B1837-201-0A0 & 147790-0-01
With the Towa Bobbin Case Tension Gauge the guess work is gone forever. This gauge allows embroiderers to consistently set accurate embroidery bobbin case tension. In just a few seconds you can verify your bobbin tension is where it should be to achieve optimum results. It's simple to use and comes with complete instructions. No setup is required. It's ready to use right out of the box.
How to Use a Bobbin Tension Gauge
The Towa BTG3 product is a BOBBIN CASE TENSION GAUGE LRG CAP TM-3.
This gauge allows embroiderers to consistently set accurate embroidery bobbin case tension on style M jumbo embroidery bobbin cases. With the Towa Bobbin Case Tension Gauge the guess work is gone forever. In just a few seconds you can verify your bobbin tension is where it should be to achieve optimum results. It's simple to use and comes with complete instructions. No setup is required. It's ready to use right out of the box.
Used with the following bobbin cases: 18045, P413830, H-15, B1837-201-0A0 & 147790-0-01
With the Towa Bobbin Case Tension Gauge the guess work is gone forever. This gauge allows embroiderers to consistently set accurate embroidery bobbin case tension. In just a few seconds you can verify your bobbin tension is where it should be to achieve optimum results. It's simple to use and comes with complete instructions. No setup is required. It's ready to use right out of the box.
How to Use a Bobbin Tension Gauge
- Take the guess work out of setting thread tensions.
- Using thread tension gauges makes it easy to adjust both bobbin and upper tensions. It's quick, easy and will help you eliminate unsightly bobbin thread showing on top, looping top stitches and thread breaks. Your embroidery will look its best with consistent, balanced thread tensions. Here's how to use a bobbin tension gauge to take the tension out of setting tensions!
Instructions for Use:
- Remove the bobbin case from your machine. Be sure the bobbin thread is out of the pigtail and place your bobbin case with the bobbin in it into the gauge slot. Snap the bobbin case in place.
- Wrap the bobbin thread around the two pulley wheels and around the plastic hook end on the gauge.
- Steadily pull the thread and note the reading on the gauge. This represents tension readings in grams. Correct bobbin tensions should be 180 to 220 grams (up to 250 grams when embroidering caps).
- Please Note: If your gauge is shown in units of 10's, the correct bobbin tensions should be 18 to 22 grams (up to 25 grams when embroidering caps.)
- Adjust the bobbin case spring tension screw as needed to get the desired reading.
Note: The gauge needle should provide a steady reading. If you experience a bouncing, erratic reading it can bedue to a dirty or defective bobbin case.
Tip: Slide a business card back and forth under the bobbin tension spring to clear any dirt.
Once you have adjusted your thread tensions, it's always a good idea to run tests.
- First run a fill stitch test pattern.
- If you experience any top stitch looping, slowly tighten the main upper tension knob until this looping goes away (looping can also occur if your bobbin tension is too tight).
- Proper tensions for satin stitches should reveal 1/3 bobbin and 2/3 top thread color on the underside of the embroidery.
Note: Too much bobbin showing on the underside and/or showing on the topside usually means either the bobbin tension is too loose or the top thread tension is too tight.
Brother Thread Tensions PDF for All Machines
Non-US Warranty: 30 days parts and labor.
Specifications
Compatible with Brother Sewing Machine Models:B1 Box Machine, B745, B746, B747, B791, B792, B797 & B798.
Compatible with Consew Sewing Machine Models:
120, 145R, 146RB, 175RB, 199RB, 205RB, 206RB.
Compatible with Feiyue Sewing Machine Models:
FY5318.
Compatible with Gammill Sewing Machine Models:
Quilters.
Compatible with Nolting's Sewing Machine Models:
Quiltmasters.
Compatible with Juki Sewing Machine Models:
DDL-201, DDL-201S, DDL-201H, DDL-560, DNU-241, DNU-1541 & LZH-1290.
Compatible with Mitsubishi Sewing Machine Models:
CU-865-22, DB-130E22, DB-189-22, DB-199-22, DX-370-20, DX-870, DY-330, DY-337, DY-339, DY-340, DY-349, DY-350, DY-359-22, LT2-180BIT, PB-330, PLK-1210, PLK-1410, PLK-1710, PLK-2520, PV-1000 & YU-360-22.
Compatible with Nakajima Sewing Machine Models:
280L.
Compatible with Rex Sewing Machine Models:
11-155.
Compatible with Singer Sewing Machine Models:
121C, 121D, 369W & 531B.
Compatible with Supreme Sewing Machine Models:
T206RB.
Compatible with Tacony Sewing Machine Models:
C206RB, T155RB & T1206.
Compatible with Tin Lizzie Sewing Machine Models:
120, 145R, 146RB, 175RB, 199RB, 205RB & 206RB.
Compatible with Yamata Sewing Machine Models:
FY5318.
Click Here to View a Troubleshooting Guide for Thread from Superior Thread Company(.PDF)
Common Singer Bobbin Cases & Bobbin Case Tension: Sunday Morning Quickies September 19, 2021 by Bob Fowler
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.