One right zipper foot Set with left toe:
One inside foot with teeth #240158
One outside foot with teeth

Non-US Warranty: 30 days parts and labor.

Please make sure that the foot aligns straight with your needle plate and foot so that the needle has equal clearance on both sides of hole in the foot and in the hole of the needle plate.

For even-sided stitching when joining two pieces of fabric, lace, or trim, try this edge joining foot.
It's also great for narrow edge stitching and stitching seams directly into the ditch. Use Center Needle Position Only.

1/4" spring-type high-shank presser foot. Will fit most high-shank machines, including:

• Baby Lock Quilter's Choice Professional (BLQP)
  
• Brother PQ1500S
  
• Janome 1600P, 1600P-DB, 1600P-DBX, 1600P-QC
  
• Juki TL98Q, TL98QE, TL98E, TL2000, TL2010
  
• Pfaff Hobby 1200 Grand Quilter
  
• Viking Mega Quilter

Non-US Warranty: 30 days parts and labor.

Will fit most Industrial Sewing, Lockstitch Machines Inc
Brother B755 Series, Juki 227, 555 and more
Singer 96K and More
Any many other Chinese machines inc Wimsew etc
Not for walking foot machines only lock stitch Industrial Machines

Non-US Warranty: 30 days parts and labor.

These sets of double needle feet with spring loaded center guide facilitate straight sewing along a center seam with equal distance stitching on both sides of the seam.The adjustable spring loaded center guide is always in contact with the material even when the walking feet go up. The stitching will always be even. sets Outside & Inside Feet for Brother, Consew, Highlead, Juki, Mitsubishi, Seiko, Singer, Tacsew, Artisan, etc



# TP-1/4 1/4"

# TP-5/16 5/16"

# TP-3/8 3/8"

# TP-1/2 1/2"

See Application on Global LP1646 XLH Double needle walking foot postbed machine with center guide and compensating inner presser foot.


It is used for basebal stitch so the operator can go down the center seam leaving an equal distance on both sides of the seam. Since the guide is spring loaded even when the the walking foot goes up the center guide is always in contact with the material leaving a beautifull French Seam.

Used on any double needle walking foot machines like :
Consew 339 RB / Juki LU1560 , LU521 / Econosew 211 , 1560 / Artizan 4420
and many other double needle machines using Singer style feet

Non-US Warranty: 30 days parts and labor.

Includes 12" Arc Template Ruler, Stable Tape, Domestic Quilting Ruler Foot allows you to free motion quilt on any home sewing machine with the templates provided, or try the Introductory Ruler Template Sets under Recommended Accessories below.

Note: If you are using this foot with a Kenmore 158. Super High Bar shank you will need to purchase the Clip On High to Low Shank Adapter Here

Attention Bernina Owners: The Westalee foot requires a shank adapter for use with any Bernina machine. The part number required for most models is the Bernina 032710.70.00 #77 Short Adapter.

Released January 2015, this foot makes the impossible possible on any domestic sewing machine. The style of foot varies depending on your machine we currently have 5 different styles based on the 3500 different machines in the market today.

Simply provide your Brand and Model number of your sewing machine when ordering, and Sew Steady will send the correct rulers for your machine's shank style.

Ruler Thickness: (Use Low Shank Templates 3mm Thick for LS and MS Feet)
Low Shank: 3mm Ruler Thickness
High Shank 4-5mm Ruler Thickness
Longarms: 6mm Ruler Thickness

Sew Steady recommends the "Large" size and above extension tables for doing ruler work.



Quilting Templates and Rulers from Westalee in Australia coming soon





These new products allow Free Motion Quilters to do ruler work with on home machines which has been missing in the industry. We have 5 different styles of feet and 3 thicknesses of optional ruler templates that vary based on the shank height.



Ruler Foot Install Information and Procedures

Non-US Warranty: 30 days parts and labor.

Medium Shank Ruler Foot for:
• Bernina 7 Series and 8 Series machines
benefit from a MS foot as it allows the foot to
sit lower to the plate and helps remove the
hop.
• Pfaff Machines using the Spring Free Motion
Setting: Creative Sensation Pro, Creative Sensation, Creative Vision, Creative Performance, Creative 4.5, 4.0, 3.0, 2.0, Performance 5.0, Quilt Expression 4.2, 4.0, Expression 3.5, 3.2, 3.0, 2.0, Expression 150.

Includes 12" Arc +3" Feather Template Rulers, Stable Tape, Domestic Quilting Ruler Foot allows you to free motion quilt on any home sewing machine with the templates provided, or try the Introductory Ruler Template Sets under Recommended Accessories below.

Attention Bernina Owners: The Westalee foot requires a shank adapter for use with any Bernina machine. The part number required for most models is the Bernina 032710.70.00 #77 Short Adapter.

Released January 2015, this foot makes the impossible possible on any domestic sewing machine. The style of foot varies depending on your machine we currently have 5 different styles based on the 3500 different machines in the market today.

Simply provide your Brand and Model number of your sewing machine when ordering, and Sew Steady will send the correct rulers for your machine's shank style.

Ruler Thickness: (Use Low Shank Templates 3mm Thick for LS and MS Feet)
Low/Medium Shank: 3mm Ruler Thickness
High/HSS Shank 4-5mm Ruler Thickness
Longarms: 6mm 1/4" Ruler Thickness

Sew Steady recommends the "Large" size and above extension tables for doing ruler work.





Quilting Templates and Rulers from Westalee in Australia coming soon





These new products allow Free Motion Quilters to do ruler work with on home machines which has been missing in the industry. We have 5 different styles of feet and 3 thicknesses of optional ruler templates that vary based on the shank height.

Non-US Warranty: 30 days parts and labor.

You must use a Ruler Foot when working with rulers and templates when stitching directly onto a quilt.

Ideally the Ruler Foot should measure ½" across the collar with the needle stitching at 1/4" from the ruler or template edge. This will make it easy to calculate spacings across a block or quilt.

Nolting, A1, Handy Quilter, Innova and Prodigy machines all have a true ½" round Ruler Foot. Gammil and APQS have a 9/16" Ruler Foot, which will stitch out at 9/32" from the ruler or template edge.

At Westalee Design we have been making all our templates since 2008 to suit both sizes.

Our templates are made Machine specific and you will achieve the same result for either sized foot.

We have Great News for Gammill owners!
We now manufacture a ½" round Ruler Foot to stitch a 1/4" from the template edge to be used with 1/4" or 3/8" thick templates. Made from stainless steel composite material, with good visibility from the front and back, supported at the sides, there is no way the Ruler Foot can slip under or over a template.

Quilting Ruler Foot and Template Set. This video is about the Westalee Designs Ruler Foot and Template Set Demo Project Offer. Information applies to all ruler feet and optional templates.

Ruler Foot Install Information and Procedures

Non-US Warranty: 30 days parts and labor.

Set of 5 Double Sided Templates. Suits Sit and Sew Longarm Machines as well as the larger table Machines.

10 Different Styles including Clamshell, Oval, Wave, Straight Edge. All with reference lines.

The set includes Clamshell, Oval, Wave and Straight Edge Styles. Sized to enable easy control up against the hopping foot.

Ruler foot is not included and must be purchased separately if you do not already own the foot

Sized to enable easy control up against the hopping foot.

Clamshell: Sew Steady presents Westalee's design of their Clamshell template

Template thickness, an explanation.
There have been some posts suggesting that there is no reason why you can not use 6mm or 1/4" longarm templates and rulers on your domestic sewing machines when using a ruler foot. Unfortunately this is not allways the case.

Non-US Warranty: 30 days parts and labor.

The Juki TL Series Quilting Foot Side Open Toe allows you to be able to see the needle better as you do stippling or freemotion quilting with your machine. The Juki TL Series Quilting Foot Side Open Toe is all metal and made to last. Juki TL Series Quilting Foot Side Open Toe allows you to adjust the height of the foot to compensate for the amount of batting you use in the quilt. The foot will no bury into your quilts due to this great feature.
The Juki TL Series Quilting Foot Side Open Toe is compatible with the following machines:
Juki TL98
Juki TL98Q
Juki TL98e
Juki TL2000Qi
Juki TL2010
Janome 1600P
Janome 1600P-DB
Janome 1600P-DBX
Janome 1600PQC
Brother PQ1300
Brother PQ1500s
Brother PQ1500SL
Viking Megaquilter
Baby Lock Jane
Baby Lock Quilter's Choice Pro
Pfaff Grand Quilter

Non-US Warranty: 30 days parts and labor.

the 12''Template is the essential Starter Template and is included with every ruler foot we sell.

You can also choose sizes 3'',4'',6'',8'' and the whole set of all 5 of them.

This does not include the ruler foot Sold Separately

Attention Bernina Owners: If you are currently using the Bernina #72 Ruler Foot, instead of the Westalee Ruler Foot, please specify that in the brand and model of machine question, or in the comments of your order, since that foot could require a different thickness of Westalee ruler.

Non-US Warranty: 30 days parts and labor.

Comes in 20 Sizes!

1 1/2 x 4
2 x 4
2 1/2 x 4
3 x 4
1 1/2 x 6
2 x 6
2 1/2 x 6
3 x 6
1 1/2 x 8
2 x 8
2 1/2 x 8
3 x 8
1 1/2 x 12
2 x 12
2 1/2 x 12
3 x 12
1 1/2 x 18
2 x 18
2 1/2 x 18
3 x 18

This does not include the ruler foot Sold Separately

Attention Bernina Owners: If you are currently using the Bernina #72 Ruler Foot, instead of the Westalee Ruler Foot, please specify that in the brand and model of machine question, or in the comments of your order, since that foot could require a different thickness of Westalee ruler.

Non-US Warranty: 30 days parts and labor.

Comes in 4 Styles with 2 sizes each

Persian Clamshell 1 . WT-PC-01 -1 1/2” points & 2” points
Persian Clamshell 2 .WT-PC-02 - 1'' points & 3” points
Squat Oval Clamshell 1. WT-SOC-1 - 3/4” x 1” squat ovals and 1” x 3” squat ovals
Squat Oval Clamshell 2.WT-SOC-2 - 3/4” x 1” squat ovals and 1/2” x 1 1/4” squat ovals
Clamshell 1. WT-CC-1 - 1/2” x 1” half circles and 1 1/2” x 3” half circles
Clamshell 2. WT-CC-2 - 1/2” x 1” half circles and 1/2” x 3” half circles
Oval Clamshell 1 . WT-OC-1 - 1” x 1” ovals and 3” x 3” ovals
Oval Clamshell 2 . WT-OC-2 - 1 1/2” x 1 1/2” ovals and 2” x 2” ovals


This does not include the ruler foot Sold Separately

Attention Bernina Owners: If you are currently using the Bernina #72 Ruler Foot, instead of the Westalee Ruler Foot, please specify that in the brand and model of machine question, or in the comments of your order, since that foot could require a different thickness of Westalee ruler.

Non-US Warranty: 30 days parts and labor.

This perfectly circular free-motion foot allows you to sew a constant 1/4" away from the edges of your ruler templates.

Download Ebook(.PDF)

This set includes:
• (1) Westalee 1/2" Free-Motion Quilting Ruler Foot,
• (1) 7" Arc Template that makes a 12" circle (good to use in 6" or smaller quilt squares)
• (1) Adjustment Guide
Stable Tape Strip

Domestic Quilting Ruler Foot allows you to free motion quilt on any home sewing machine with the templates provided, or try the Introductory Ruler Template Sets under Recommended Accessories below.

Note: If you are using this foot with a Kenmore 158. Super High Bar shank you will need to purchase the Clip On High to Low Shank Adapter Here

Attention Bernina Owners: The Westalee foot requires a shank adapter for use with any Bernina machine. The part number required for most models is the Bernina 032710.70.00 #77 Short Adapter.

Released January 2015, this foot makes the impossible possible on any domestic sewing machine. The style of foot varies depending on your machine we currently have 5 different styles based on the 3500 different machines in the market today.

Simply provide your Brand and Model number of your sewing machine when ordering, and Sew Steady will send the correct rulers for your machine's shank style.

Ruler Thickness:
Low Shank: 3mm Ruler Thickness
High Shank 4-5mm Ruler Thickness
This kit is not available for Longarms: 6mm Ruler Thickness

Sew Steady recommends the "Large" size and above extension tables for doing ruler work.

Westalee Ruler Foot for Domestic Machines. Westalee Design manufactures more than 300 Rulers, Templates and Specialty Tools for Patchwork and Quilting, so who better placed to make a Ruler Foot for Domestic Sewing Machines. This video shows how to fit the new foot and talks about rulers. Domestic Machines have a small clearance between the Presser Foot Bar and the Needle Plate.

Quilting Templates and Rulers from Westalee in Australia coming soon





These new products allow Free Motion Quilters to do ruler work with on home machines which has been missing in the industry. We have 5 different styles of feet and 3 thicknesses of optional ruler templates that vary based on the shank height.

Definition of 12" Arc: Arc is cut from a 12" Circle so it's not 12" long but closer to 6" in actual length.
Arc is also sold in sampler set. 12" Arc is also known as a Curve template and can be purchased in a variety of sizes.

Non-US Warranty: 30 days parts and labor.

• Fits high shank machines
  
• Roller helps fabric to feed over leather and vinyl

Non-US Warranty: 30 days parts and labor.

These feet will fit on all "Reliable" single needle industrial Walking Feet machines.

MSK8600B
MSK8400
MSK8400BL18
MSK1541S

Non-US Warranty: 30 days parts and labor.

This binder is for light to medium weight apparel, quilting, binding and tapes, not for thicker fabrics such as upholstery which will not feed through the mouth of the binder.

Swing Away Binders allow reverse stitch back tacking. Stationary binders only allow forward feeding. You can tack in place without any stitch length, but reversing with stitch length would bunch up the fabric against the stationary binder.

Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

We are pleased to introduced the ruler foot for the HZL and DX series!
The quilt presser foot for ruler is able to fit the ruler template onto its side face in all directions. The quilt presser foot is intended to be used for creating patterns with the ruler template. This is a much awaited foot by our customers! src="https://www.youtube.com/embed/USRCHZ9njHM" frameborder="0" allowfullscreen>

Non-US Warranty: 30 days parts and labor.

1st release will ship by 12/15/19

Download Ebook(.PDF)

THIS IS for 3 SHIPMENTS (Quarterly)

Are you ready to start quilting your own patchwork projects? Join our Design Club to get inspired with 13 traditional blocks and each includes 4 unique quilting designs using Westalee Design Rulers. Get a Instructional Video, Template, Pattern and more with each release.

Join the Club Show Special

Club Membership Includes:

• Notebook
  
• crosshair ruler
  
• stitching line discs
  
• design your way patterns,
  
• program guide for quilt assembly instructions and Quarterly Releases.
  
  
  Plus get quarterly releases of
  
• 3 Patwork & Design Patterns,
  
• 3 Highlighted Templates
  
• 3 Instructional Videos for patchwork assembly and quilting.
  
  TOTAL VALUE $650+
  
  Additional benefits include discounts on optional designs or patchwork tools each month .
  
  Click Here to get a sample of the releases coming(.PDF)
  

Non-US Warranty: 30 days parts and labor.

Locate presser feet easily. The clear storage boxes have adjustable compartments to fit your presser feet collection. Keeping each foot in a separate compartment makes it easy to find the one you are looking for.

• Features include no-spill latches sturdy hinges and dividers for additional compartment capabilities
  
• Great for scrapbooking crafts art supplies home office and more
  
• Ideal for use in organizer totes
  
• Translucent storage box.
  
• Hinged lid with locking no spill latch tabs
  
• Made of sturdy plastic
  
  

Non-US Warranty: 30 days parts and labor.

Used to apply piping or welt cording. This presser foot gives you a professional finish whether the welt cord or piping is purchased pre-covered or you cover it yourself. Ideal for upholstered or home decoration projects.

• Needle goes in the Center
  
• Has an 1/8" groove on each side of center
  
• Use for single piping on either side

Non-US Warranty: 30 days parts and labor.

Get the gift that keeps giving! This is the Ultimate Quilting with Templates Design Guide. Get inspired to finish all your quilt tops at home with the “Essence of Tradition Design Club” Full year membership includes:

• 13 Traditional Block Patterns
  
• 50+ Quilting Designs (4 per block)
  
• 13 Westalee Design Templates (available in Low shank, High shank or Long Arm Thicknesses)
  
• 13 Instructional Videos
  
• Notebook with Design Tools & Patterns
  
• Plus get 10% Discount on optional designs & patchwork tools
  
  This project uses Westalee Design Templates, with a Design Guide Created By Donna McCauley
  *Note this project is not intended to be duplicated as shown, but rather to be used as a design library and guide to quilt your own projects. Optional templates and designs are shown for inspiration.
  
  Quarterly Releases:
  
  1st Release – December 15th (Includes: Notebook, 3 Templates / Patterns / Videos)
  2nd Release – March 15th (Includes: 4 Templates / Patterns / Videos)
  3rd Release – June 15th (Includes: 3 Templates / Patterns / Videos)
  4th Release – September 15th (Includes: 3 Templates / Patterns / Videos)
  Cost for Full Year: $450.00 (Total Value $650.00)
  – OR –
  1st Qrt Only: $150.00* (Includes: 3 blocks + notebook)
  *100.00 each for additional quarterly releases
  
  Click Here to get a sample of the releases coming(.PDF)
  

Non-US Warranty: 30 days parts and labor.

Get the gift that keeps giving all year! This is the Ultimate Quilting with Templates Design Guide. Get inspired to finish all your quilt tops at home with the “Essence of Tradition Design Club” Full year membership Includes:

• 13 Traditional Block Patterns
  
• 50+ Quilting Designs (4 per block)
  
• 13 Westalee Design Templates
  
• (available in Low shank, High shank or Long Arm Thicknesses)
  
• 13 Instructional Videos
  
• Notebook with Design Tools & Patterns
  
• Plus get 10% Discount on optional designs & patchwork tools
  
  
  This project uses Westalee Design Templates, with a Design Guide Created By Donna McCauley
  
  
  Plus get quarterly releases of
  
• 3 Patchwork & Design Patterns,
  
• 3 Highlighted Templates
  
• 3 Instructional Videos for patchwork assembly and quilting.
  
  TOTAL VALUE $650+
  
  Additional benefits include discounts on optional designs or patchwork tools each month .
  
  Essence of Tradition Design Club Overview:
  
  
  
  Click Here to get a sample of the releases coming(.PDF)
  

Non-US Warranty: 30 days parts and labor.

For Singer industrial models 31-15, 44, 95 and 96 class, 196K, 241 and 251 class, 245, 331K, 400W, 451K, 600A, 600W, also many 31 type--Brother, Consew, Juki, Rex and most other lockstitch machines,

Non-US Warranty: 30 days parts and labor.

• Very Narrow Foot for edge stitching or zippers.
  
• The SA172 narrow foot is that foot we wish we had for those tight corners, working up against a ridge, or other similar situations. This foot is a must-have for applying piping on either side of the foot to home decor, craft and fashion sewing projects.

Non-US Warranty: 30 days parts and labor.

• Use for 1/8" Corded Piping

Non-US Warranty: 30 days parts and labor.

High Shank screw On All Metal 1/2" Cording Foot with Groove to Right of Needle. For Singer 31, 44, 95, 96 class, 195K, 241, 251, 281 class, 331K, 366K, 400W, 451K, 600W, also many Brother, Consew Juki, Rex, Tacsew and most single needle straight lockstitch industrial machines that take standard high shank screw on feet, for applying Jumbo Cording up to 1/2" Diameter. Not for upholstery walking foot machines.

Non-US Warranty: 30 days parts and labor.

The open toe foot is one of the most practical feet available for sewing machines. Use this foot for satin stitching, buttonholes, as well as any technique where you really need to see exactly where you are sewing. There is a wide cutout on the bottom of the foot; this will allow the satin stitching to flow under the foot without catching.

Non-US Warranty: 30 days parts and labor.

• Use on high shank industrial sewing machines for zippers or corded piping.
  
• The needle will be on the right of the foot.

Non-US Warranty: 30 days parts and labor.

• Use on high shank industrial sewing machines for zippers or corded piping.
  
• The needle will be on the left cutout of the foot.
  
  

Non-US Warranty: 30 days parts and labor.

• Use for 3/16" Corded Piping

Non-US Warranty: 30 days parts and labor.

• Use for 3/16" Corded Piping

Non-US Warranty: 30 days parts and labor.

Used to apply piping or welt cording. This presser foot gives you a professional finish whether the welt cord or piping is purchased pre-covered or you cover it yourself. Ideal for upholstered or home decoration projects.

• Needle goes in the Center
  
• Has a 3/16" groove on each side of center
  
• Use for single piping on either side

Non-US Warranty: 30 days parts and labor.

• Gathering Foot
  The SA171 gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications.

Non-US Warranty: 30 days parts and labor.

• Use for 1/4" Corded Piping

Non-US Warranty: 30 days parts and labor.

Used to apply piping or welt cording. This presser foot gives you a professional finish whether the welt cord or piping is purchased pre-covered or you cover it yourself. Ideal for upholstered or home decoration projects.

• Fits high shank machines
  
• Has a 1/4" groove underneath to guide the corded piping
  
• Heavy duty, all metal
  
• Construct and/or attach single or double piping

Non-US Warranty: 30 days parts and labor.

• Use for 3/8" Corded Piping

Non-US Warranty: 30 days parts and labor.

Compatible with the Brother PQ1500S and Tacsew DDL8500T

Non-US Warranty: 30 days parts and labor.

High Shank screw On All Metal 1/2" Cording Foot with Groove to Left of Needle. For Singer 31, 44, 95, 96 class, 195K, 241, 251, 281 class, 331K, 366K, 400W, 451K, 600W, also many Brother, Consew Juki, Rex, Tacsew and most single needle straight lock stitch machines, for applying Jumbo Cording up to 1/2" Diameter.

Non-US Warranty: 30 days parts and labor.

Non-US Warranty: 30 days parts and labor.

This foot is convenient for edge sewing, topstitching, or zipper sewing

This foot is only 2 mm wide from the needle drop to the edge of the foot making it convenient for narrow topstitching especially on areas such as collars and pockets.
Janome high speed sewing machines sew at a maximum 1,600 stitches per minute, the fastest on the market. Everything on these sewing and quilting machines is built for high quality stitches at professional speeds, including the specialized accessories and presser feet.



767-406-019

Fits machines: 1600P DB, 1600P DBX, 1600P-QC , 1600PLE

Non-US Warranty: 30 days parts and labor.

Cording Foot Right Janome 1600P Series Machines

Fits All Janome 1600P Series Models:

Janome 1600P
Janome 1600P-DB
Janome 1600P-DBX

Non-US Warranty: 30 days parts and labor.

All Metal High Shank Screw On for Janome 1600P, Juki TL98, TL2000Qi, TL2010Q, Brother PQ1500S and S6200A, and Most High Shank Industrial Power Stand Straight Stitch Sewing Machines

Non-US Warranty: 30 days parts and labor.

Shirring / Gathering Foot Janome 1600P Series Machines

Fits All Janome 1600P Series Models:

Janome 1600P
Janome 1600P-DB
Janome 1600P-DBX

Non-US Warranty: 30 days parts and labor.

• Fits high shank machines
  
• Straight Stitch Foot
  
• White Non-stick base glides smoothly over fabric

Non-US Warranty: 30 days parts and labor.

Part # : 165010HVNF
Part Name : High Shank Screw on HINGED ZIPPER FOOT NEEDLE FEED UPTURNED w/ ELONGATED NEEDLE HOLE

Non-US Warranty: 30 days parts and labor.

This foot allows you to sew as close to the zipper as possible without accidentally nicking the zipper teeth. Also great for sewing cording and piping.

Guaranteed to fit Juki Sewing Machine Models:
DDL-8100E, DDL-8700

Guaranteed to fit Singer Sewing Machine Models:
121D Centurion, 1300, 191D, 195K, 196K, 241, 245, 251, 281, 31, 331K, 366K, 400W, 44, 451K, 491, 591D, 600W, 660A, 771, 95, 96

Guaranteed to fit Union Special Sewing Machine Models:
63400

High Shank
Zipper Foot

Non-US Warranty: 30 days parts and labor.

*For *Juki DU141, DU1181, Brother 797, Consew 205RB, Gemsy 1808, YAMATA FY5318, Chandler DY337, Nakajima 181L, Artisan 797A, 1797AB, Mitsubishi DY350, LY3300, Rex & Tacsew GG6-6

*Welting foot for Brother B797, Consew 205RB, Chandler 337, Gemsy 1808, Juki DU141, TDU-N62, Mitsubishi DY330, Nakajima DBU-180, Rex 11-155, Seiko H2BL or Tacsew T-155, Typical GC6-6 upholstery machines and others where the OUTSIDE foot walks. This is not the S32 for many more brands and models WITH needle feed as well as walking foot.

*Welt Foot Set does not fit the Reliable MSK-8400BL-18, however this foot does!

Please choose the size that you need: 1/8", 3/16", 1/4", 5/16" and 3/8"

• Single welt sets (C32's) allow for a single welt cord to pass to the left of the needle.
  
• This is not the Double welt sets that allow for two welt cords to pass, one to each side of the needle.

Non-US Warranty: 30 days parts and labor.

Welt foot for Tachsew GC6-6

Non-US Warranty: 30 days parts and labor.

• This straight sitch inside foot fit any mini walking foot staraight stitch and zigzag machines.
  
  
• Wide zigzag inner foot has to be replaced with this foot to use left or right zipper feet on zigzag portable walking foot machines.

Non-US Warranty: 30 days parts and labor.

• Extra heavy duty high shank foot
  
• Use for free motion quilting, quilting along with a pattern, free-hand embroidery, etc.
  
• Needle is 1/5" from the edge of the ring. Use the edge of the ring along the previous row to place rows 1/5" apart.

Non-US Warranty: 30 days parts and labor.

• Extra heavy duty high shank foot
  
• Use for free motion quilting, quilting along with a pattern, free-hand embroidery, etc.
  
• Needle is 1/4" from the edge of the ring. Use the edge of the ring along the previous row to place rows 1/4" apart.

Non-US Warranty: 30 days parts and labor.

• Left Hand Outside Zipper Foot for portable walking foot machines.
  
  
• For zigzag models requires changing inside foot with straight stitch foot .

Non-US Warranty: 30 days parts and labor.

• Right Hand Outside Zipper Foot for portable walking foot machines.
  
• For zigzag models requires changing inside foot with straight stitch foot .

Non-US Warranty: 30 days parts and labor.

for Tacsew 111, SINGER 111, JUKI 563 1541 1508, CONSEW 206, 225, 226, Seiko, ECONOSEW, ARTISAN, RELIABLE 1541, REX

Welting foot set for Consew 206RB, 225RB, 226RB, Juki DNU1541,1541S, 1508, LU563, Reliable MSK1541S, Nakajima DBU-280L, Singer 111, 211 or Tacsew 111-155, 563 upholstery machines and others where the INSIDE needle foot walks.

Please choose the size that you need: 1/8", 5/32, 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"

When choosing welting feet, use a size slightly larger than your welt cord size to allow room for fabric.

• Single welt sets (S32's) allow for a single welt cord to pass to the left of the needle.
  
  All welting feet are priced and sold per set (inside and outside foot).

Non-US Warranty: 30 days parts and labor.

*Will not work on Pfaff, Adler, or Durkrop, or on any Walking Foot Feet Only Machines without Compound Needle Feed and Walking Foot. Will not work on machines where outside foot walks.
Look at how they connect.

This set will fit power stand brands and models:

ARTISAN : 618-1, 4400RB

BROTHER : B837

*CONSEW : 206RB5, 225, 226, 226R, 277 power stand models.

JUKI : DNU-241, DNU-1541, LU-562, LU-563, LU-1114, LU1508, LU-1510, LU-1560

MITSUBISHI : DU-100, DU-105, LU2-400, LU2-401

SINGER : 111G, 111W, 153K101, 153W101, 153W103, 168W, 211G, 211U, 211W

TACSEW : T111-155, LU-563

RELIABLE: 1541,

Non-US Warranty: 30 days parts and labor.

The velvet foot only slightly touches the needle plate when the foot is lowered to obtain perfect sewing without bruising the specialty fabrics.
Janome high speed sewing machines sew at a maximum 1,600 stitches per minute, the fastest on the market. Everything on these sewing and quilting machines is built for high quality stitches at professional speeds, including the specialized accessories and presser feet.



767-407-010

Fits machines: 1600P-QC , 1600PLE

Non-US Warranty: 30 days parts and labor.

Straight Stitch and Zigzag Walking foot for [KEMORE 385] - 19001, 19010, 19030, 19150, 19153, 19157, 19233, 19365 [NEW HOME Janome] - MC10000, MC11000, MC5700, MC8000, MC9000 - MC9700,

Extended US Warranty: 90 Days Service/Exchange Only

Non-US Warranty: 30 days parts and labor.

This Welting Piping foot set was created by Reliable for the Reliable Barracuda 200ZW Machine.

The Reliable Barracude Sewing Machine includes the 1/8" -3/16" welting feet set in the box. For doing bigger jobs, you can add this optional 1/4" foot set.

Non-US Warranty: 30 days parts and labor.

Non-US Warranty: 30 days parts and labor.

Use Double folded bias tape for binding the edges of lightweight apparel and quilting fabrics up to upholstery materials as long as they feed through the attachment

Fixed Double Folded Bias Binder Attachment: No Screws Included to fasten to machine bed. Its the same thread size as your foot to presser bar screw.

*Binder is adjustable left to right with screws on the sewing machine bed to line up the folded bias tape to the straight stitch or zigzag needle positions on the machine.

Tape feeder mouth is adjustable front to back, so it won't run into the feed dogs or presser foot while sewing.

It is best to stitch in place at end of sewing so that the binder is not pushed back by the material when trying to reverse stitch.

Non-US Warranty: 30 days parts and labor.

*Does not work on high speed, auto oil, power stand machines such as Singer, Brother, Juki, Pfaff, Consew, Reliable, etc., or industrial straight stitch machines that do not have barrel extension on the right hand side of the needle bar clamp to support the activating fork lever on the buttonhole attachment.

Note: fork activated attachments such as walking foot, ruffler and buttonholer no longer work on new style straight stitch industrial sewing machines because there is no barrel extension to the right of the needle bar clamp to support the forks.

Button Hole Attachment for industrial sewing machines.


How to install and operate the buttonhole attachment YS-4455 for industrial sewing machine


See All You Tube Videos on Industrial Buttonhole Attachments

Non-US Warranty: 30 days parts and labor.