• Features a special True Color balanced lighting system that's perfect for artists and crafters alike
  
• The colors you see are accurate, with no tinting or false-color casts
  
• Lights also reduce glare and soften shadows, while enhancing details and textures
  
• The low-wattage bulbs also produce more light while consuming less power, and putting off less heat than standard bulbs even after hours in use
  
• The extension is available for the large model to cover areas of nearly 14 ft.
  
• The overall height of it can be adjusted, and the width can be resized to fit
  
• It's mobile and can be placed wherever you need it the most with the included caster wheels

• 1. Adjust leg height to be 1/4” shorter than machine free arm.
  Hint: stand leg up to free arm, adjust accordingly
  (for proper fit the Table will be level with the free arm of machine
  at the needle).
  
• 2. Install legs by placing Table upside down on a firm surface.
  Protect Table top with a soft towel. Push legs all the way onto
  black buttons attached to Table. Turn Table upright.
  
• 3. Remove any accessory trays surrounding free arm. Slide Table
  into place (if legs not attached or not at right height, Table may
  not slide into place correctly).
  
• 4. Install support/suction leg (when supplied) by attaching the
  suction cup into the top of the leg, adjust height and place
  where desired.
  
  REMOVING LEGS (TRANSPORTATION & STORAGE):
  Remove legs by placing Table upside down on a firm,
  protected surface and gently wiggle legs back and forth.
  DO NOT TWIST LEGS!
  PLEASE DO NOT PICK TABLE UP BY LEGS
  PLEASE DO NOT UNSCREW BUTTONS FROM TABLE
  
  TROUBLE SHOOTING FIT ISSUES
  Fit Issue
  Possible Cause
  Remedy
  Not fitting around free arm
  Accessory tray still
  attached
  - OR -
  Legs not attached or at correct height
  Remove accessory tray
  - OR -
  Attach legs/adjust height (see table instructions)
  Table still not fitting correctly
  
  Note: if Table is not fitting properly, please call for assistance or return authorization: 800-837-3261
  
  *Sew Steady Free Motion Table 32x24" for Home Sewing Machines. The longer your machine arm, the closer to the end of the table the needle will be. If your machine arm is too short, you may need to stand up to reach the needle comfortably with your arms and hands. We recommend a smaller table if the needle is over 10" from the end of of the table.
  
  Note: This table was designed for machines with free arms longer than 13” overall length (not needle to neck) If you free arm is shorter than that this size of table may not be ideal as the needle will be more than 10” from the front of the table.

• Free-Standing for use with any work area
  
• Adjustable leveling casters
  
• Height-Adjustable to 3 levels (Highest height 81" - Lowest height 65")
  
• 4 Possible sizes: 5', 7', 10', 12' (with optional extension on 10' model)
  
• Simple on/off switch
  
• Sturdy steel frame
  
• Bright-White color lamps
  
• True-Color balanced lights for accurate colors
  
• Soft light produces less glare
  
• Softer shadows
  
• Low heat
  
• Low wattage (less power consumption)
  
  The Grace Luminess Light Station is the perfect lighting solution for any work area. The Grace Luminess Light Station is adjustable to three different height settings, and can be set up in one of four different lengths. The Grace Luminess Light Station is designed to fit the most commonly size cutting tables, sewing tables, hand quilting frames, machine quilting frames and general work areas. This item is available in 5 foot or 10 foot length.
  
  NEW MORE EFFICIENT LED LIGHT TECHNOLOGY
  The low-wattage LED lights produce more light while consuming less power, and putting off less heat than standard work lights. Even after hours of use, the Luminess lights are cooler than either incandescent lights. The full Luminess also consumes less power than regular bulbs.
  
  *This notice is to clarify the use and compatibility of the 2-ft Light Bar Extension. The 2-ft
  Extension can combined with a 10-ft Light Bar to extend it to a 12-ft set-up. It can also be used
  with a 10-ft Light Bar to reduce it down to 7-ft. Please note, however, that the 5-ft Light Bar is not designed to be extended out to 7-ft using the 2-ft Extension. The 5-ft Light Bar is designed to set-up only in the 5-ft size. Customers wanted sizing flexibility will need to purchase the 10-ft Light Bar, and the 2-ft Extension if desired. If you have any questions, please call 1-800-264-0644.

Assembly Information Packet

• 20" x 48" table top
  
• Heavy-duty K-legs
  
• Rubberized feet
  
• Drawer
  
• Unassembled
  
  NOTE This table is manufactured specifically for the Reliable Barracuda Machine, If you have a machine other than the Reliable Barracuda, please measure your machine base, and contact us at 866-255-2726, to verify that it will fit your machine before purchasing

• 40” wide x 19 ¾” deep x 28 ¼” high
  
• Accommodates the larger embroidery and quilting machines currently on the market with 9 - 12" arms.
  
• Not recommended for machines over 45 lbs.
  
• *Will accommodate sewing machines no larger than 24-3/8” wide (left to right) and 13-1/8” deep (front to back)
  
• No lip is required on the insert.
  
• Platform is adjustable for different heights of machines
  
• Clean White in color
  
• Arrives Fully Assembled in 1 box weighing 37 #’s
  
• Sturdy easy folding steel-lock legs for easy storage
  
• Use for any craft project like sewing, scrap booking & card games
  
• White mar-resistant melamine surface
  
• Initially, flip the table over on its top and step on the locks to ensure they go fully into the black channel lock.
  
  
• If you're looking for simplicity and functionality in a sewing cabinet that won't take up too much space then you've found it in the Arrow Gidget 2 Table. This sturdy table offers freearm and flatbed sewing positions and features an adjustable platform for your convenience. The steel locking legs fold up easily for easy storage and a melamine surface ensures that this sewing table will offer years of wear-resistant dependability.
  
  Our Gidget II is a sturdy table that offers freearm and flatbed sewing for those larger sewing machines on the market. Her opening is 23-1/2” wide by 12-1/4” deep and she will support a 40-pound sewing machine! The steel locking legs offer a sturdy base, but fold up neatly for easy storage. With a Velcro strip to secure the legs in place and 2 wheels on the side of the table, our Gidget is perfect table for taking to classes, retreats or in your RV. Her tough melamine surface is mar-resistant allowing for years of use creating sewing and craft projects.
  
  
• Insert sold separately ***No lip is required on the insert.***
  
  Click Here to View the Arrow Gidget Manual on Adjusting the Flatbed Position(.PDF)
  
  Click Here to View Instructions for Adjusting Height on a Manual Platform Arrow Table(.PDF)
  

• Fully submerged table (20" x 48") and K-leg stand, plus 1/2h.p. motor included
  
• Heavy duty adjustable K legs
  
• Shipped fully assembled
  
• Durable Formica tops for long service and lasting beauty
  
• Color available: Tan
  
• Cutout available for most industrial machines
  
• 1/2 HP high speed (3,450 r.p.m) and 110 or 220 volt set ups.
  
• Stand include:motor,servo,steel driver,treadle and base,treadle rod,treadle extension,switch
  
• These stands do not include: drip pan,knee lifter,thread stand,bobbin winder,belt or hinges.These items are included with the machine head

• Heavy duty adjustable K legs
  
• Durable formica tops for long service and lasting beauty
  
• Color available: Tan
  
• Cutout available for most industrial machines
  
• Stand includes: motor, treadle pedal and base, treadle rod, treadle extension, gooseneck light, on and off switch.
  
• These stands do not include: drip pan, knee lifter, thread stand, bobbin winder, belt or hinges.
  These items are included with the machine head
  
• Dimensions: 48” length x 20” width x 30” height when set up
  
  Consew Sewing Machine Table Assembly Demonstration
  

• New style! Replaces the older model of space saver table
  
• Heavy duty adjustable H legs
  
• Durable formica tops for long service and lasting beauty
  
• Table top comes blank
  
• Stand includes: motor, treadle pedal and base, treadle rod, treadle extension, on and off switch.
  
• These stands do not include: drip pan, knee lifter, thread stand, bobbin winder, belt or hinges. These items should be included with your machine head
  

• Display multiple sewing machines at once with removable shelf.
  
• Sturdy design with locking industrial casters for stability and easy mobility.
  
• 2 large storage drawers for accessories and embroidery hoops.
  
• Includes accessory kit that features LED light and extra power outlets.
  
• Cabinet Finish: Vinyl Laminate

• Sturdy design with locking casters for portability and stability
  
• Large lift opening to fit standard sewing machines on the market, up to 55 lbs
  
• Dual-hydraulic lift
  
• Expandable caddy for ironing and cutting workspace
  
• Designed to work with a custom machine insert increasing comfort and efficiency
  
• Quilt leaf stored on the back of the cabinet
  
• Expands your workspace and prevents large quilts or large pieces of fabric from pulling and ending up on the floor
  
• Door cubby for holding notions and other materials
  
• Available Finishes: Teak or White
  
• The Laverne and Shirley is made of melamine laminate, MDF, and composite wood

• Cast Iron Stand
  
• Cabinet Top
  
• Assembled dimensions 34 L x 16 W x 31 H
  
• No Instructions Included for RTA Assembly
  
  
  Assembling Treadle Sewing Machine Cabinet
  
  it is best to start with the cabinet top upside down on the floor to attach the drawer units to the bottom of the table top. Then hold the stand side panels apart (may take two people) in order to attach the foot pedal and flywheel assemblies in between Then attach the assembled stand to the table top before turning right side up. Then install your Janome 712T onto the cabinet hinges and hook up the belt to the machine hand wheel and stand flywheel. Please email or call me when you need help on the next step. John Douthat, Owner & Tech, AllBrands