December 22, 2024

Quilting Machines - Industrial and Commercial withTable

S_6155_517
QuiltTalk In-Depth Tension & Needle Flex.
We've all been there...tension headaches when quilting are a literal pain!

If you are new or even seasoned to longarming, here are some tips to help you smooth out the tension path to achieve beautiful stitches. When your stitches are beautiful, creating quilting designs is so much more enjoyable! Start with a well maintained machine from top to bobbin. Be very familiar with the process your machine manufacturer recommends to keep the hook area oiled and clean and follow the maintenance schedule recommended. Keep the hook area free of lint by brushing out the lint after every bobbin change or blow out with air if recommended by the manufacturer. Use the size needle recommended with the size of thread and brand of needles recommended by your machine company. Change needles frequently - educators recommend a new needle with every quilt if queen sized, more often with batik quilts.

Use a finer thread in the bobbin, such at DecoBob™. The finer thread will work better with the top thread, and nestle up into the layers easier than the same weight thread as the top thread. Understand how a stitch is made and how needle flex affects the stitch formation. Here’s a good video to understand needle flex on a longarm machine.

Place a folded piece of batting in the first thread guide above your cone of thread, lay the thread in the fold and thread your machine. The batting will prevent the thread from bouncing through the thread guide and may reduce breakage. Don’t have your quilt sandwich too tight. It is good to see a small drape over the throat of the machine as it glides under the quilt. Tension all of a sudden goes haywire? Check your thread path, thread can often jump out of a pigtail and wind itself around a three hole thread guide.

Don’t be fooled when you see a “nub” of your bobbin thread up through the needles hole. This is exactly where we want to see it and when the quilt comes off the frame the stitch will relax into the batting layer, resulting in a beautiful stitch on the top and bottom. Changing the needle, checking for correct needle placement, cleaning the hook assembly and bobbin case are the first steps to solving tension issues, along with checking for correct thread path. Develop a system you follow every time you need to diagnose tension issues and troubleshooting.

Juki TL2010Q Sew & Quilt Machine 9x6"Arm +Sew Steady Sit Down Free Motion Extension Table 32x24"+Westalee Ruler Foot* Template Tape Gauge

Juki , TL-2200QVP Mini , TL2200QVP Mini , TL-2010Q, tl2010qi, tl-2010qi, tl2010, tl2010q, tl2000q, tl2000qi,  (TL98, 1 pedal Trim, Speed Control),  Straight Stitch, Sewing Machine, 6x9 Arm, DropFeed, KneeLift,12mm foot lift, Walking Foot, 6 Feet, 200 Needles Bobbins, 6 Threads, Case

Juki TL2010Q Sewing Quilting Machine 9x6"Arm +Sew Steady Sit Down Free Motion Extension Table 32x24"+Westalee Ruler Foot* Template, Tape, Gauge, Ebook

Our Price: $1,199.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Includes NEW Sit Down Quilting Extension Table 32x24" from Sew Steady for Juki TL2010Q TL2020 TLTL2000I TL18QVPTL98 TL98Q TL98QE, Sew Steady Ruler Foot is High Shank Special



Juki TL2010Q, New LED Lights, Sub Tension (Pre Tension Knob for Consistency), 1 Foot Pedal for Auto Thread Trimming and Speed Control, Speed Limit Control Knob On Front of Machine, Knee Lift and Hand Lever for Presser Foot Lift, Automatic Needle Threader. (TL2000Qi+4 Features)

See Many Optional Juki Feet under Recommended Accessoires, including Westalee Ruler Foot... Speciify HSS High Shank Special Ruler Foot for Juki TL portable models. John

* Synchrony 12 Months No Interest Financing Equal Monthly Pay plus any applicable taxes. Apply online. Transaction Code 112 Synchrony will advise you of your maximum amount or full credit that you can use towards purchase.



"My Juki 2010 makes me feel so confident starting quilts because piecing is so much faster and more accurate now. And I can quilt them myself without fear! I am so, so happy about that. My nearest Juki dealer is 2 hours away so I shopped online and decided to buy from Allbrands.com. This was after some very quickly answered questions from their customer service. And the included 10 year warranty made me glad I picked it over a slightly less expensive one on ebay."

– Caroline, owner of SewCanShe.com
Article (2/15/14): My New Juki TL2010Q




Same as Juki TL98 +1 Pedal Trim + Speed Control On Board. Be sure to use your toes on the foot control to run the machine and your heel to activate the thread trimmer. If you use try to use your heel to run the machine, it will only activate the thread trimmer and not run the machine. John Douthat, Owner & Tech, AllBrands.

The New Juki TL2010Q is a Single Needle Lockstitch Machine for straight stitching and quilting is also perfect for tailoring, dressmaking and home decor items. The Juki TL2010Q can be used as a table top machine, mounted into some cabinets or used on machine quilting frames. It is portable and has a built in carrying handle. Sewing area extension shown in picture is included with the machine.

The Juki TL-2010Q is a high-performance sewing and quilting machine. The TL-2010Q is a single needle, lock-stitch, portable machine, constructed of aluminum die-casting to ensure industrial-quality sewing.

JUKI TL-2010Q NEEDLE THREADER


*With advanced features, such an industrial sub-tension system, *variable speed control slider, and bright white LED lighting, this machine is built for precision sewing. With a large work area of up to 23 inches (with auxiliary table attached), the TL-2000Qi can handle large quilt, sewing or home decor project with ease.


Juki TL-2010Q Instruction Manual(.PDF)

Two Types of Quilting Foot / Drop Feed

Two typed of quilting feet are supplied as standard accessories with the machine. A 1/5 Quilting Foot is used for basic quilting and the Quilting Foot for precision sewing with 1/4" inch stitch width. The feed dog can be raised and lowered simply by depressing a switch. When quilting, the drop feed allows you to sew curved stitches with ease.

Even Feed Foot
With its reliable feed, the even feed foot ensures the machine's ability to produce beautiful seams when sewing difficult-to-feed fabrics such as georgette and velvet, as well as heavy weight materials such as leather.

Automatic Thread Trimmer
The machine is equipped with an automatic thread trimming device that simultaneously cuts the needle and bobbin threads at the sewing end by lightly pressing the push-button. It uses the thread trimming mechanism that is similar to the industrial sewing machine type.

Easy Bobbin Replacement
A new bobbin case latch and an enlarged bobbin case area make it easier to remove and replace the bobbin.

Automatic Needle Threader
The push lever automatic needle threader easily threads the needle without eyestrain and allows you to start sewing quickly.

Knee Lifter Lever
The knee lifter lever allows you to lift / lower the presser foot without using your hands.

Adjustment of Presser Foot Pressure
Presser foot pressure can be adjusted according to the fabric being sewn by turning a regulator located on the top of the machine.

Extended Sewing Area
The throat size from the needle to inside the machine is 8.5 inches.


JUKI TL Series - Chapter 1: Set Up.
Welcome to chapter 1 of the TL-18QVP instructional video series. In this video, we will teach you how to set up and operate your machine.



How to thread a Juki TL 2010Q


JUKI TL-2010Q NEEDLE THREADER

Instruction Manual(.PDF)


See You Tube Videos on How to Use Automatic Needle Threader on Juki TL2010, TL2000, TL98 Machines


See Current You Tube Videos on Juki TL2010Q Sewing and Quilting Machine

Quilting Ruler Foot and Template Set. This video is about the Westalee Designs Ruler Foot and Template Set Demo Project Offer. Information applies to all ruler feet and optional templates.


Click here to access the Juki warranty registration form
Extended US Warranty: 5 Years Mechanical, 2 Years Electrical, 90 Days Adjustments on defects in material or workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications


Juki TL Comparison Chart

Dimensions: 17.8 x 8.6 x 13.8 inches
Sewing Speed: Max. 1,500 r.p.m
Stitch Length: Max. 6mm
Lift of the Presser Foot:
- By Lever, Max. 9mm
- By Knee Lifter, Max. 12mm
Needle: HAx1 (130/705H) #7-#18 (HLx5#9-#16)
Dimensions: 17.8 x 8.6 x 13.8 inches
Weight (Machine only): 11.5kg
Rated Voltage / Power Consumption: 120V / 1.4A, 100W
Power Consumption of the Lamp: 12V, 3W
Auxiliary Table (Dimensions): 590 x 277 (mm)
Hook: Horizontal-axis Full-rotary Hook
Sewing Speed: Max 1500 RPM
Stitch Length : Max 6mm
Lift of the Presser Foot : By lever Max 9mm, by knee lifter Max 12mm
Needle: HA x 1
Dimensions: 452 (W) x 350 (H) x 219 (D) (mm)
Weight (machine only): 11.5 Kg/25.4 Lbs

LED light
Sliding Speed Control
One Pedal foot control
Sews heavy weight materials with ease
Predetermined stop position of the needle
1/4 foot and free action foot
Adjustment of pressing pressure according to material weight
Thread tension scale
Automatic stop-bobbin winding
Portable sewing machine
Automatic thread trimmer

1500 stitches per minute
Stitch length 6 mm
Universal presser foot tape ribbon narrow elastic application
Presser foot lift 7 mm by hand
Knee lifter 12 mm extra lift
Throat Area: 8.5(L)x 5.9 (H) inches
Auxilliary table included: dimensions 590 mm x 277 mm (12 x 23)
UL Listed
  • Includes the Following Accessories: Standard Straight Stitch Foot, 1/4 inch Quilt Foot and
    1/5 inch Quilt (Also called "Free Motion" Darning Feet) Foot Walking Foot, 1/4" Seam Compensating Foot, Rolled Hem Foot, Zipper Foot, Foot Control, Power Cord, Instruction Manual.
  • Manufacturer's Warranty - 5 Years Mechanical, 2 Years Electrical, and 90 Days Labor


Juki Warranty Information

C&T Publishing CT11441 Quilting for Hire by Shelly Pagliai

C&T, Publishing, CT11441, Quilting, for, Hire, Shelly Pagliai

C&T Publishing CT11441 Quilting for Hire

Our Price: $24.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Learn to run a successful longarm quilting business with this interactive guidebook. Full of exercises, tips, and sample forms and contracts, it’s everything author Shelly Pagliai wished she’d known before launching her business.
Non-US Warranty: 30 days parts and labor.

Superior SO5Gal SewLube Sewing Machine Oil 5 Gallon: Juki and Industrial Sewing Machine Reservoir Pans, Refill Bottles, Tubes

Superior, # SO, SMO-GW , One Gallon, Lily White, "Stainless" Oil, for Industrial Sewing Machine, and Serger, Auto Oil, Bath Reservoirs, - Replaces ,Juki Defrix Oil, N.LA, Superior  #SO SEW LUBE  1-Gallon White Stainless Non-Detergent Oil USA,  Industrial Sewing Machine & Serger Auto Oil Bath Reservoirs (Juki Defrix NLA)

64450: Superior SO5Gal SewLube Sewing Machine Oil 5 Gallon: Reservoir Pans

Our Price: $199.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Clear Mineral Oil Based Stainless Non Detergent Oil for Industrial Sewing Machines and Serger Oiler Refill, also Auto Oil Bath Lubrication Reservoirs in Oil Pan Under the Machine Head.

  • Dyno Lily White (ISO-22) low viscosity crystal clear oil is a highly refined consistent viscosity and non-detergent mineral oil.
  • Ideal for sewing and extile machinery and parts. Specially formulated for use in high speed sewing machines.
  • Colorless and stainless, Dyno Lily White oil inhibits rust and controls oxidation
  • Excellent for use in applications where the oil may come into contact with the fabric.

    Ships by Ground or ocean transport only. Considered Hazardous to ship by air.

    SEW - LUBE OIL, Lily White Machine Oil #SO, Made in U.S.A.
    Low viscosity, water white lubricating oil for sewing machines, textile machinery and parts. Excellent for use in applications where oil may come in contact with fabrics.

    Contains: Hydrotreated Paraffinic Oil (CAS No. 72623-86-0)

    Caution: Consult Material Safety Data Sheet (MSDS) prior to use. Use in strict accordance with all information contained on MSDS.

    Hazard Rating: Health - O (Insignificant) Fire - 1 (Slight), Reactivity 0, (Insignificant)

    For Chemical Emergency: Spill, Leak, Fire Exposute or Accident - Call CHEMTREC - Day or Night 1 800-424-9300 or 202-483-7616.

    Dyno Chemicals and Lubricants
Non-US Warranty: 30 days parts and labor.

Specifications

How To Add Oil To An Industrial Sewing Machine
Using the Reliable 3300SD single-needle sewing machine with direct drive, our technical manager here at Reliable will show you how to oil your industrial sewing machine and ensure it stays properly lubricated.

Superior SO55 SewLube Sewing Machine Oil 55 Gallon Drum Barrel, for Juki and Industrial Sew Reservoir Pans, to Refill Tubes, Quarts, Gallon Containers

Superior, # SO, SMO-GW , One Gallon, Lily White, "Stainless" Oil, for Industrial Sewing Machine, and Serger, Auto Oil, Bath Reservoirs, - Replaces ,Juki Defrix Oil, N.LA, Superior  #SO SEW LUBE  1-Gallon White Stainless Non-Detergent Oil USA,  Industrial Sewing Machine & Serger Auto Oil Bath Reservoirs (Juki Defrix NLA)


Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Availability: Please contact us for availability.
Condition: New In Box

Features

Clear Mineral Oil Based Stainless Non Detergent Oil for Industrial Sewing Machines and Serger Oiler Refill, also Auto Oil Bath Lubrication Reservoirs in Oil Pan Under the Machine Head.

  • Dyno Lily White (ISO-22) low viscosity crystal clear oil is a highly refined consistent viscosity and non-detergent mineral oil.
  • Ideal for sewing and extile machinery and parts. Specially formulated for use in high speed sewing machines.
  • Colorless and stainless, Dyno Lily White oil inhibits rust and controls oxidation
  • Excellent for use in applications where the oil may come into contact with the fabric.

    Ships by Ground or ocean transport only. Considered Hazardous to ship by air.

    SEW - LUBE OIL, Lily White Machine Oil #SO, Made in U.S.A.
    Low viscosity, water white lubricating oil for sewing machines, textile machinery and parts. Excellent for use in applications where oil may come in contact with fabrics.

    Contains: Hydrotreated Paraffinic Oil (CAS No. 72623-86-0)

    Caution: Consult Material Safety Data Sheet (MSDS) prior to use. Use in strict accordance with all information contained on MSDS.

    Hazard Rating: Health - O (Insignificant) Fire - 1 (Slight), Reactivity 0, (Insignificant)

    For Chemical Emergency: Spill, Leak, Fire Exposute or Accident - Call CHEMTREC - Day or Night 1 800-424-9300 or 202-483-7616.

    Dyno Chemicals and Lubricants
Non-US Warranty: 30 days parts and labor.

Specifications

How To Add Oil To An Industrial Sewing Machine
Using the Reliable 3300SD single-needle sewing machine with direct drive, our technical manager here at Reliable will show you how to oil your industrial sewing machine and ensure it stays properly lubricated.

Superior SO Sew Lube Sewing Machine Oil 1 Gallon for Juki and Industrial Sewing Machine Reservoir Pans, Refill Oilers, Tubes

Superior, # SO, SMO-GW , One Gallon, Lily White, "Stainless" Oil, for Industrial Sewing Machine, and Serger, Auto Oil, Bath Reservoirs, - Replaces ,Juki Defrix Oil, N.LA, Superior  #SO SEW LUBE  1-Gallon White Stainless Non-Detergent Oil USA,  Industrial Sewing Machine & Serger Auto Oil Bath Reservoirs (Juki Defrix NLA)


Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Clear Mineral Oil Based Stainless Non Detergent Oil for Industrial Sewing Machines and Serger Oiler Refill, also Auto Oil Bath Lubrication Reservoirs in Oil Pan Under the Machine Head.

  • Dyno Lily White (ISO-22) low viscosity crystal clear oil is a highly refined consistent viscosity and non-detergent mineral oil.
  • Ideal for sewing and extile machinery and parts. Specially formulated for use in high speed sewing machines.
  • Colorless and stainless, Dyno Lily White oil inhibits rust and controls oxidation
  • Excellent for use in applications where the oil may come into contact with the fabric.

    Ships by Ground or ocean transport only. Considered Hazardous to ship by air.

    SEW - LUBE OIL, Lily White Machine Oil #SO, Made in U.S.A.
    Low viscosity, water white lubricating oil for sewing machines, textile machinery and parts. Excellent for use in applications where oil may come in contact with fabrics.

    Contains: Hydrotreated Paraffinic Oil (CAS No. 72623-86-0)

    Caution: Consult Material Safety Data Sheet (MSDS) prior to use. Use in strict accordance with all information contained on MSDS.

    Hazard Rating: Health - O (Insignificant) Fire - 1 (Slight), Reactivity 0, (Insignificant)

    For Chemical Emergency: Spill, Leak, Fire Exposute or Accident - Call CHEMTREC - Day or Night 1 800-424-9300 or 202-483-7616.

    1 U. S. Gallon (3.8 Liters). Dyno Chemicals and Lubricants
Non-US Warranty: 30 days parts and labor.

Specifications

How To Add Oil To An Industrial Sewing Machine
Using the Reliable 3300SD single-needle sewing machine with direct drive, our technical manager here at Reliable will show you how to oil your industrial sewing machine and ensure it stays properly lubricated.

Grace Dial & Push Button Remote Speed Control Box, 1 Prong Pin Foot Control Plug In for Juki Brother Babylock Bernina Elna Janome Pfaff Viking Singer*

Grace 1 Prong 3 Way Speed Control BoxBrother Babylock Bernina Elna Janome Juki Pfaff Viking & Singer Sewing Machine Single Pin Foot Control Receptacle

Grace SPD-CONT1 Speed Control Box Single-prong for Juki Brother Babylock Bernina Elna Janome Pfaff Viking Singer

Our Price: $79.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 5-7 business days.
Condition: New In Box

Features

*Exception: Order this Three Prong Plug In for portable Janome 1600P, Elna 7100, Singer Pfaff Grand Quilter, Viking Mega Quilter 9" Arm Space. (not longarms).

The Grace Speed Control is a universal foot pedal replacement. Use the dial to set the speed of your sewing machine. It works with many machines on the market so if you switch sewing machines, the Speed Control can too!

The Grace Speed Control is a universal foot pedal replacement that works with many machines on the market*. lt allows you to have compatibility with multiple machines listed below* Without the Grace Speed Control you would have to use your regular foot controller for start/stop and speed control.

The Grace Speed Control is compatible with many DC-powered machines that have a single prong foot pedal plug-in. D.C.-powered machines usually have a separate foot pedal plug-in and a power cord plug in.

You can use the Speed control without a frame. If you wanted the Sure Stitch instead, that would need a frame to work.

(AC-powered machines combine the two cords into one plug; these types of machines are generally NOT compatible with the Grace Speed Control, except for 3 prong Janome 1600P.)

Features:

  • Speed dial that allows you to set your machine to desired stitch speed
  • On/Off Button
  • Pulse Button (machine runs untill you release it, or touch and release for a single stitch)
  • Velcro Straps for easy attachment to your frame
  • Compact Ergonomic Design

    The Speed Control Box comes with a 3.5mm Male Mono Plug connector and a 5.5mm Female Power Plug.

    (Machines with other connectors are not currently compatible.)

    US Warranty: 1 year limited warranty on defects in materials and workmanship.
    Extended US Warranty: Extended Warranty Available
    Non-US Warranty: 30 days parts and labor

    Sure Stitch length regulator vs. speed control box: a Quilting Board Discussion. In September I purchased a Grace II frame with a Brother 1500s machine. I added the Grace Sure Stitch which is a dual function stitch regulator. You can set the stitch size and the speed adjusts with how fast you move the machine. I can't imagine doing without either.


Non-US Warranty: 30 days parts and labor.

Specifications

The Grace Speed Control puts the power of your foot pedal at your fingertips.
Note: This comes standard with each machine quilting frame. This controls the constant stitch speed, it is NOT a stitch regulator like the SureStitch.

Product Features:
On/Off button to start and stop your machine
Easy to use knob controls stitching speed

*Machine Compatibility
Compatibility Chart

QCC Quilters Cruise Control Brain & Connector Cord Upgrade, Specify Machine and Frame

QCC Quilters Cruise Control BRAIN & CONNECTOR CORD for Plug In to your Foot Control Receptacle for Named Machines* that You Want to Add Compatibility


Our Price: $465.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 5-7 business days.
Condition: New In Box

Features

Quilters Cruise Control BRAIN to be installed, and CONNECTOR CORD for Plug In to your Foot Control Receptacle for Named Machines* that You Want to add Compatibility with, for your Existing QCC.

Compatible with the following machines:
  • BabyLock QCP
  • Bernina models 135-200
  • Brother PQ1300
  • Brother PQ1500S
  • Elna 7200
  • HQ-16 Imperial
  • Husqvarna Viking Mega Quilter
  • Janome 1600P Professional
  • Janome 6300
  • Janome 6500
  • Janome 6600
  • Juki TL98E
  • Juki TL98Q/QE
  • Juki TL2000Qi
  • Juki TL2010Q
  • Pfaff Grand Quilter
  • Pfaff Creative Vision
  • Pfaff various older models
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

The Quilter's Cruise Control regulates the stitch length of the sewing machine. The brain is sewing machine-specific; necessary cords and optical encoders sold separately. (models vary by color; may not be as shown)

QCC Quilters Cruise Control Free Motion Stitch Length Regulator with XY Encoders, for Quilting Machines on Frames From Compatibility Chart*

Quilter's, Cruise, Control, GMQ, Pro, Juki, TL-98Q, Little, Gracie, II, Quilt, Quilting, Cruise, Controller, QCC Quilters Cruise Control Free Motion Stitch Length Regulator with XY Encoders, for Quilting Machines on Frames From Compatibility Chart*


Our Price: $619.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 5-7 business days.
Condition: New In Box

Features

*Extra Bonus Includes AllBrands BWG $40 Value 3 Year Nationwide Extended Warranty Enhancement, Repair Parts & Labor, Power Surg, Transfer Owner, No Lemon, Replace, Buyout% Depreciation, for Non Commercial Use in the USA.

See Compatibility Chart Below. Plugs into electronic computer sewing machine dedicated foot control port, eliminating the need to use your foot control. The Quilter's Cruise Control made in the USA, is a stitch length regulator for use with many short-arm quilting frames. It plugs directly into your sewing machine's foot pedal port. Using optical encoders mounted to your quilting frame, it actively changes the speed of the sewing machine as you move it over the fabric to help maintain uniform stitch length throughout the quilting project.

QCC will NOT work on Babylock BLQ2 not made by Brother, but WILL work on Babylock Quilters Choice Professional BLQP, and new Babylock Jane BL500A both made by Brother

Note: Plugs into foot control port of specified electronic sewing machines with frames, so you don't have to use a separate foot control. Requires quilting frame carriage platform to install x & y motion electronic encoders, which feedback the speed of platform movement, so the motor can speed up or down and maintain stitch length.

Using optical encoders mounted to your quilting frame, it actively changes the speed of the sewing machine as you move it to help maintain uniform stitch length throughout the quilting project.

• Made in the USA
• It is a stitch length regulator for use with many short-arm quilting frames.
• It plugs directly into your sewing machine’s foot pedal port.
• Optical encoders are installed on the carriages of a quilting frame to gather the speed information of the quilter's movement. This is transmitted to the brain of the Quilter's Cruise Control and then, in turn, to the
sewing machine. Without the optical encoders on the frame, there is no signal to the brain, etc. Therefore, there must be a frame with carriages for the QCC to work.

roper Optical Encoder Installation & Removal



Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

*Current Compatibilities Available:

Sewing Machines

  • Babylock QCP Quilter’s Choice Professional (but not BLQP2 by Jaguar)
  • Bernina models 135-200
  • Brother PQ1300
  • Brother PQ1500
  • Brother PQ1500S
  • Brother PQ1500SL
  • Brother PQ1500SLPRW
  • Elna 7200
  • HandiQuilter Original HQ16 Machine and Frame
  • Husqvarna Viking Designer LE
  • Husqvarna Viking Designer SE
  • Husqvarna Viking Mega Quilter
  • Husqvarna SE LE
  • HV Designer Diamond
  • HV Designer 1
  • HV Designer 1 USB
  • HV Designer II
  • HV Designer SE
  • Janome 1600P Series
  • Janome 6300P
  • Janome 6500
  • Janome 6600
  • Juki TL98E
  • Juki TL98Q
  • Juki TL98QE
  • Juki TL2010Q
  • Juki TL2000Qi
  • Pfaff Grand Quilter
  • Pfaff Creative Vision
  • Pfaff Classic Style 2023, 2025, 2027, 2029
  • Viking Husqvarna Mega Quilter
  • Viking Husqvarna Sapphire 850

    Quilting Frames
  • B-Line with inserts
  • B-Line without inserts
  • Bernina Quilting Frame
  • Grace and Little Gracie (black plastic carriages)
  • Grace and Little Gracie (wood and aluminum carriages)
  • Grace GMQ Pro Frame
  • Grace Mini-Pinni
  • Grace Next Generation
  • Grace Pinnacle
  • Grace Sturdy Lite Quilting Frame
  • HandiQuilter
  • HandiQuilter II
  • HandiQuilter HQ16
  • HandiQuilter HQ16 Machine and Frame
  • Happy Jack
  • Hinterberg (Original)**
  • Hinterberg (Stretch)**
  • Hinterberg (Summit)**
  • Inspira Imperial
  • Inspira Original
  • John Watts Quilter
  • New Joy: Gold Standard
  • New Joy: Magic
  • PC Quilter's Max Throat
  • Pennywinkle Valley Ranch
  • Quilt Easy
  • Super Quilter King
  • Super Quilter Proflex
  • Suzy Q Quilter
  • Ultra Quilter

    **may require compatible parts, purchased from frame manufacturer.

    If you do not see your sewing machine or quilting frame, contact us for future release dates. We are working on adding different versions. Some Quilters Cruise Controls can take 2 - 3 weeks for delivery depending upon your machine and frame combination. Cruise Controls for common machine and frame combinations such as Juki TL series and Janome 1600 series machine being used on current model Grace frames usually ship in 1 to 2 days. All Quilter's Cruise Control products are shipped directly back to the manufacturer and have a 25% restocking fee.

    Quilter’s Cruise Control Troubleshooting Guide:

    General Set-up and Operation: the speed the sewing machine goes when you are using the QCC is determined by
    the speed that you are moving the sewing machine/carriages. The optical encoders pick up on the speed. The one
    on the upper carriage determines the speed you’re moving front to back and the one on the bottom carriage
    determines the speed you’re moving left to right.
    If you’re moving the platform more than 2 inches per second, you are moving too fast. The sewing machine will go
    only about 1500 stitches per minute (about two inches per second maximum). Faster than that, the sewing
    machine can’t go fast enough and then the needle coming out of the fabric can’t move fast enough to come out
    straight up. This can cause thread breakage.
    The Quilter’s Cruise Control has nothing to do with thread breakage. It serves basically the same purpose as the
    foot pedal. And the foot pedal has nothing to do with thread breakage.
    If your sewing machine has a speed slide, it should be in the middle range as this is the speed that works optimally
    with the usual settings on the Quilter's Cruise Control. The stitch length on the sewing machine should be set to
    zero. The pressure on the foot should be very low or zero.
    Troubleshooting for the QCC
    First, unthread your needle.
    Turn on the sewing machine and the QCC. Ensure the machine light is on and the needle is slowly moving up and
    down. Move the carriages front to back only. This checks the operation of the optical encoder on the top carriage.
    Do the same moving the carriages left to right. This checks the operation of the optical encoder on the bottom
    carriage.
    If the problem seems to be the front to back stitching, follow this sequence:
    First we need to narrow down if it is something wrong with the optical encoder or the wiring harness or if it is an
    installation problem. With the encoder wheel on the top carriage between your thumb and forefinger, spin the
    encoder.
    1) Does the machine change speed? Yes/No
    If yes, that encoder and the wiring harness to it are working just fine and there is something wrong with the
    installation. If the sewing machine does not speed up and slow down, something is not right with the encoder or
    the wiring harness to it or the installation (see below for a couple of suggestions).
    If the problem seems to be the left to right stitching, check the optical encoder on the lower carriage instead.
    If this is an installation problem, follow this sequence: Make sure that the optical encoder "tires" or o-rings on the
    upper carriage are making good contact on the lower carriage. Gravity should hold the encoder down, although it
    should not be so tight that you can't raise it up and let gravity take it down again.
    2) Are the O-rings making good contact? Yes/No
    Make sure that the encoder is spinning smoothly. If it's hard to see, you might want to put a dot of white paint or
    fingernail polish on one of the edges to help see.
    3) Is the encoder spinning smoothly? Yes/No

    If it is not an installation problem, follow this sequence: Now we need to figure out if it is the optical encoder or
    the wiring harness. The way to tell is by gently, very gently, unplugging the wire from the optical encoder and
    swapping it over to the other optical encoder. If the problem moved, then the wiring harness is the culprit. If it
    stayed in the same place, then the optical encoder is the culprit.
    4) What is the culprit? Wiring harness/Optical encoder
    Best Practices...You may also want to check:
    Bobbin tension. Be sure to check the tension in the bobbin. You can do this by taking the bobbin case with the
    bobbin in it and the thread coming out of it. Pretend that it is like a yoyo. Take the protruding thread into your
    right hand. Hold your left hand (if you’re right-handed, otherwise just the opposite) below your right hand.
    With your right hand holding the thread, allow the bobbin case to move down the thread into your left hand.
    If it moves so quickly you don’t need to coax it like a yoyo, the tension is too loose. Tighten it up (tighten the
    screw on the bobbin case until such time you test it, it needs to be coaxed down the thread into your left
    hand). If the bobbin case doesn’t move down at all, loosen it (loosen the screw on the bobbin case until such
    time you test it, it needs only a bit of coaxing, but does move down into your left hand).
    Thread path. Refer to your sewing machine manual and follow the directions for threading the machine. For
    example, from the pin holding your thread spool, guide the thread up through the two loops on the
    telescoping pole, then down through the third hole on the pre-tension arm. Do not go around the screw-like
    part that is used only for winding a bobbin. Then guide the thread through the tension disks over the tension
    spring, under the lower hook, up through the reciprocating arm, then down and through the thread guides
    and through the hole in the needle. This ensures that the thread tension, together with the correct bobbin
    tension, is appropriate and won’t cause any thread breakage.
    If the thread is correctly routed, there should be no problem. If there is still a problem, there could be a burr
    in the tension spring. Or there could some other mechanical anomaly in the sewing machine.
    New needle. Needles should not be used more than 8 hours.
    Make sure that your feed dogs are down all the way. If they’re rubbing up against the bottom of the fabric,
    then you could have a problem with the fabric “sticking” and them maybe not “moving” away from the
    needle quickly enough to avoid broken thread or even a broken needle.
    Make sure that you have appropriately raised the frame’s take-up bar that goes through the throat of the
    sewing machine. If the fabric isn’t just on or barely above the throat of the machine all the way across the
    frame, you could have one of two problems: If too low, it will bog down your movement of the carriages. If
    too high, the fabric is tenting up, meaning that it is too high above the throat and when the foot goes down
    and then comes back up again, the fabric comes up before the needle has had a chance to come out of the
    fabric. This could also cause broken thread and broken needle.
    If you are unable to make any determination of the culprit causing the troubles, you may wish to send the unit
    in for diagnosis/evaluation/service/repair/replacement. There is a minimum service fee required for all Service
    Tickets, please contact us for information.

Juki Miyabi J-350QVP-S Sit Down 18x10 Longarm Free Motion Quilting Machine 110V SmartStitch Stitch Regulator xEncoders, Thread Trim, 35"W Table, Japan

J-350, J350, J350qvp, j-350qvp, Juki TL2200QVPS Sit Down 18x10" Longarm Free Motion Quilting Machine, SmartStitch Stitch Regulator, Auto Thread Trimming, 35" Wide Sturdy Table, Japan, Juki, TL2200, qvp, Quilt, Virtuoso, Pro, 18x10", Arm, Machine, Sit, Down, Long, Japan, Table, 10, Year, Warranty, 4, No, Interest

97115: Juki Miyabi J-350QVP S Sit Down 18x10in Longarm Free Motion Quilting Machine/Stand

Our Price: $6,899.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box

Features

In Stock! * 60 mo 0% Equal Payment financing available. Apply today! Synchrony Equal Monthly Pay Financing. GE Synchrony will advise you of your maximum amount of credit that you can use towards purchase. b> Special Promotion if you call 800-739-7374 for 60Mo 0% Interest Synchrony Sewing & More Financing OAC Using Transaction Code 129

Click here to access the Juki warranty registration form

JUKI Miyabi J-350QVP S Sit Down Free Motion Quilting Machine and Table. The only sit-down longarm quilter on the market with automatic thread trimmers and built-in JUKI SmartStitch stitch length regulator system. Up to 50" wide table (with optional leafs) on adjustable height metal stand with wood top and leaf for the left or right side, 30" overall depth. As a reflection of JUKI's Japanese heritage, the J-350QVP was named Miyabi meaning "Elegance." Discover true elegance with the built-in stitch regulator JUKI SmartStitch!

Meet the New Miyabi J-350QVP Sit Down Quilting Machine
longarm quilter with automatic thread trimmers and built-in JUKI SmartStitch stitch regulator system. Up to 50" wide table (with optional leafs) on adjustable height metal stand with wood top and leaf for the left or right side, 30" overall depth. As a reflection of JUKI's Japanese heritage, the J-350QVP was named Miyabi meaning "Elegance." Discover true elegance with the built-in stitch regulator JUKI SmartStitch!

Karen Pharr, Juki representative, talks about the Juki sit-down model and a Juki frame. Check out the longarm thread cutter and the laser light on the Juki machine.

More You Tube Videos on Juki Miyabi J-350QVP S Sit Down

VIEW Prior Model BROCHURE HERE

Juki is the only sit down longarm quilter with automatic thread trimmers. Up to 50" Wide Table (with optional leafs) on adjustable height metal stand with wood top and leaf for left or right side, 30" overall depth. Stand is KD knocked down un-assembled, RTA ready to assemble.

Built In Basting, Laser Point Guide, Automatic Underbed Thread Trimmers, Big M Bobbins, Direct Drive Motor, Foot Control for Speed and Thread Trimming , Metal Gears, Dry Head Limited Oiling, Auxiliary Hand Wheel. Does not include 10' Frame or Stitch Regulation below. Machine can be fully upgraded with stitch regulation on frame later. More information coming.

And yes, there will be a stitch regulator upgrade available for putting the TL2200QVP-S Sit Down head on the stand up Juki 10-12' frame that is made by The Grace Company.

SAME machine as the standup model – can be put on the frame in the future

  • 18” deep X 10” high
  • Built in bobbin winder
  • Auxiliary hand wheel
  • THREAD TRIMMER!
  • Semi Dry head technology
  • Direct drive servo motor
  • Metal gear timed
  • Auto tie off feature
  • Basting stitch
  • And MORE

    Installation Instructions: (.PDF) Set Up Manual For Juki TL2200QVP-S Sit Down Quilting Table. Please call us to speak to John, our tech, if you have any questions. It's easier than it looks on paper, and changes have been made to make it easier.

    Information Below Applies Only to TL2200QVP and J-350 Frame Models, not to TL2200QVP-S or J-350QVP Sit Down Models.
    Handles are not included and not needed for free motion quilting where you are moving the fabric under the needle.


    "Just took the Long Arm quilting class at Allbrands and it was awesome. The teacher Kay was so great and full of knowledge. Once you take the class you can rent the machine by the hour to quilt your own quilts!! Sign up, you won't regret it!!" Lisa M

    Direct drive motor with metal gears without any belts makes the machine more responsive and quieter. Specifically the motor is built into the head on the main shaft and the lower shaft is turned by a gear, there is no belt noise.

    The Juki TL-2200QVP Quilt Virtuoso Pro Long Arm Quilter is the newest Long Arm Quilting Machine on the market and from Juki in Japan and the only one on the market with top and bobbin thread trimmers.

    It has 18x10" or 180 square inches of arm space, compared to 118" for Tin Lizzie 18x6", 144" for Handiquilter Avante 18x8", and 144" for Tin Lizzie 24x6" heads. That's 25% more arm space more than 18x8 or 24x6 arms.

    The touch screen panel has many options. Automatic stitch regulation or manual speed control, up to 16 spi stitches per inch on stitch regulation. Needle programmed to always stops up or always stop down, automatic thread trimming or manual command, etc.

  • 18.25" x 10.25" oversize arm space to right of needle is the largest workspace of any 18" longarm on the market. (55% more workspace than Tin Lizzie 18x6" Arm. 25% more than HandiQuilter Avanti).
  • Side Mount Hand Wheel eliminates the need reach around to the back of machine for main hand wheel.
  • Independent M bobbin winding system allows winding bobbins while sewing, or when not sewing.
  • Front or back operation of the machine from front or back of quilting frame. Free motion from the front and pattern motion from the back with laser stylus included and optional quilting design templates or paper patterns on the table.
  • Grace All Metal 10 foot 120" frame a $3000 Value (expandable to 12 foot 144" frame with optional extension kit)
  • Stitch Regulator with X and Y encoders for the machine and platform which comes with machine.
  • Cruise Control Speed Settings as a % of 2200SPM maximum.
  • 6-16 Stitches Per Inch Settings for Stitch Length using Stitch Regulator
  • Baste to 3SPI Stitches Per Inch (1/2" 1" and 1.5"),
  • Presser Foot Adjustable Height for Fabric and Batting Thicknesses, 0-4mm with Slotted Presser Foot Height Adjustment
  • 0.5mm Recommended Distance from Bottom of Foot to Needle Plate when Foot and Needle are in lowest position. Adjustable for quilt thickness to prevent fabric from flagging (riding up and down on needle.)
  • 1/4" Tall, 1/2" Diameter All Metal Presser Foot for Rulers and Visibility.
  • Tack or Stay Stitch to make three stitches in place, and stop with needle up or down.
  • Needle Up or Down Settings will always stop with needle in fabric, or needle out of fabric
  • Needle Eye Guard to be installed at time of machine set up.
  • Presser Foot Lever to be installed at time of machine set up.
  • Two spool thread stand to be installed at time of machine set up.
  • Automatic or Manual Activation of both Top and Bottom Thread Trimming at the same time, the only quilting machine on the market with these features.
  • Super Bright LED No-heat lights above needle (4) and on both left and right handles (3 each).
  • Machine Bed Size: 18.25x10.25" (187 square inches) between needle and neck of machine
  • Speed: 2200 SPM Stitches Per Minute Maximum Speed Settings. Highest in Manual Free Motion Mode
  • Machine Head Weight 26Kg or 57 Pounds
  • Compatible with $5000 Grace Quilt Motion, Grace $2000 Creative Touch Pad Upgrade, Robotic Quilting Systems.
  • Sets up in 10' or 120" King or 5' or 60" Crib widths.
  • Batting Rail Included
  • Quick Release system for Rails, including those with rachets or tensioners.
  • Adjustable quilt frame leg Height up to 7" difference
  • Optional 2ft Extension to do 7" or 84" and 12' or 144"

    Unique Design
    The Quilt Virtuoso Pro has a slim sleek and sturdy design, unlike any Long Arm Quilting Machines to date!

    Extra Large Throat Space
    Discover the impressive 18 inches of horizontal throat space between the arm of the machine and the needle. Even more impressive is the 10 inch height, unlike most long arm quilting machines which only provide 6 to 8 inches of height

    Bright LED Lights
    10 Ultra Bright LED Light Bulbs over the needle and pattern area illuminate your workspace like never before, making it easy to see detailed work, while simultaneously reducing strain on your eyes.

    Built-in Scissors
    Convenient automatic scissors simultaneously trims the top and bottom thread. No other Long Arm Quilting Machine has this feature!

    Ergonomic Handles
    The TL2200 QVP comes equipped with ergonomic handles for ease and comfort while quilting. The ergonomic handles swivel from vertical into horizontal micro handles for precise close up detailed work! No need for extra set of micro handles.

    Needle Up/Down
    Easily move the needle up or down with the included Needle Up/Down Button. If the machine is off you can use the easy to reach hand wheel on the front of the machine allowing you to raise and lower the needle without having to turn on the machine or reach all the way around to the wheel on the back of the machine.

    Independent bobbin winder/motor
    The built-in bobbin winder has its own motor independent of the machine, so you can wind bobbins while you continue to quilt or while the machine is idle.

    Ultra Glide Tracking System
    Eight Ball bearing wheels hug the track of the frame in a V shape, ensuring smooth even quilting at all times.Machine will not "jump" off the rails.

    Take-up Bar
    The take-up bar allows you to roll up your quilt all the way without making any adjustments to the frame, unlike most other quilting machine frames where you have to adjust the rails up and down as the quilt fills the machine throat. Idler or dead bar below take up bar holds the fabric down to the bed to prevent flagging of fabric which causes skipped stitches.

    Made in Japan
    The TL2200QVP is made and assembled entirely in Juki's leading industrial manufacturing plant in Japan - not in China or Taiwan. It used technology developed for Juki's line of industrial sewing machines which have been proven benchmarks for decades of production and use. The All Metal Frame is made by Grace in Salt Lake City, Utah.

    Leader in sewing and quilting
    Juki is the Leading manufacturer of industrial sewing machines worldwide. Juki has taken this industrial knowledge and experience and put it into this long arm quilting machine for home use. The result is a unique heavy-duty high quality long arm quilting machine that all quilters are sure to love. 400W Motor is the strongest in the industry.

    2,200 SPM Stitches Per Minute Maximum Sewing Speed
    Obtain faster results! The TL-2200QVP offers professional speed so you can complete projects in record time. You can quilt faster on a Juki QVP than any other quilting machine made for the home market.

    Stitch Control - Perfect Tension Balanced Stitches
    The stitch balance control allows you to deliver more consistent stitching according to your needs for a perfect finish on your quilt. Pretension knob guarantees correct length of thread tail after thread trimmer is activated.

    Built-in Stitch Regulator
    Start, stop, speed up and slow down the motor of the quilter delivering the exact amount of stitches per inch that you have set in with the built-in stitch regulator on the TL-2200QVP Quilter. 10-12 SPI Stitches per Inch Recommended.

    Four Stitching Modes
    Work on your project the way you see fit! With three different stitch modes (Cruise doesn't stop stitching, Precise stops stitching when you stop, Manual Free Motion up to 2200SPM, and Baste for .5 to 1.5" stitch length) you can set up your stitching preferences and obtain the results you are looking for without added effort.

    Large 3.5" Color Touch Screen LCD Display
    Maintain absolute control with a top of the line Color LCD touch panel display where you can manage the stitch regulator, light settings, needle speed, stitch length, sound, screen brightness and all you need to complete your masterpiece.

    Automatic Thread Trimmer
    The machine is equipped with an automatic thread trimmer device that simultaneously trims the needle and bobbin threads to 1/4" at the sewing end by lightly pressing the push-button. It uses the same industrial thread trimming mechanism that was invented by Juki for their high speed straight stitch machines starting with the DDL555 to DDL8700 and has been in proven use for decades.

    Adjustable Front and Optional Rear Handles
    Added comfort and maneuverability with the adjustable front and optional rear handles that will give you complete control over your project from any position around the machine. Front handles are used for free motion quilting. Read handles can be used for following patterns with laser stylus included.

    Handle Bar Controls
    Start/Stop with Right Handle Button - Needle Up/Down with Left Handle Button. Controls at the reach of your finger tips.

    Compatible with ¼ Inch Thick Rulers because the presser foot ring is 1/4" tall

    All Metal Solid Steel Heavy Duty Virtuoso Frame by Grace Frame

    Internal Motor
    Internal motor provides a quiet smooth operation, without any belt/noise.

    Dry Head System
    Thanks to the advanced dry-head technology (4 sealed permanent lubrication metal bearings on main shaft and 5 silicone impregnated and brass bushings throughout rest of machine) no lubrication is required except for the rotary hook section before each quilting project. This eliminates oil stains on the sewing product.

    Quick Response Direct Drive Motor - No Drift and No Belt to Slip
    For quiet and smooth operation.

    Easy Access Auxiliary Hand Wheel
    Obtain faster results! The TL-2200QVP offers professional speed so you can complete projects in record time.


    You can register your Juki machine purchase online with our new Registration page. Click here to Register.

    Juki TL2200QVP Product Brochure(.PDF)

    Juki TL2200QVP Longarm Sewing Machine Instruction Manual(.PDF)

    Juki TL-2200QVP Parts and Service Instruction Manual(.PDF)

    Juki TL2200QVP Instruction for Presser Foot Lift Installation(.PDF)



    Description & Specifications
    Sewing speed: Max. 2,200SPM Stitches Per Minuet
    Needle bar stroke: 35mm
    Lift of presser foot: 5.5mm
    Needle: GB, Organ or Schmetz 134R and equivalents.
    Lubricating oil: New Defrix Oil No.1, or any clear sewing machine oil.
    Dimensions of sewing machine: 22.2W x 46.0H x 73.0L (cm)
    Weight of sewing machine: 26 kg. 57 Pounds
    Rated power supply / Power consumption: 120V/140W 60Hz

    Click here to access the Juki warranty registration form

    UPCs:
    Box 1 of 4: 636343171444
    Box 2 of 4: 636343171468
    Box 3 of 4: 636343171475
    Box 4 of 4: 636343171482
    Juki Tech Brian Debrick and National Educator Karen Pharr train AllBrands staff on QVP April 19, 2013






    Attaching fabric to a Grace Quilting Frame Video:


    From Juki Brand Ambassador Nicole Moore:
    "I found great success with my JUKI industrial, so it was an easy decision to purchase additional JUKI machines like the JUKI TL-2010Q straight stitch sewing machine. This is hands-down my favorite machine to sew on! I can easily piece my quilts, make most bags and even do some free motion quilting. It sews like a dream! And because I love free motion quilting, I added a JUKI J-350QVP as well. I occasionally quilt other people’s quilts, but because my long arm is currently on a table (and not a frame) I mostly just quilt my quilts with my J-350QVP. One of my business goals is to transition my long arm sit down to a frame and add the automation package. Both my kids are still in the house so until they fly the coop, I don’t have the real estate in my home for a longarm business right now. I’m also learning more about making garments so it only makes sense that I have a JUKI serger and cover stitch combo, MO-735. I bought these as gifts for my Mom and love to use them when I visit her. My mom still loves to teach me new things since sewing garments is something that I am still learning more about."

    There are several ways to stay in touch with Nicole. You can find her on Instagram every day. Subscribe to her YouTube Channel and sign up for her Weekly Newsletter. Nicole even has a Facebook Page and TikTok Channel. If you need help or are interested in starting a Creative Business – be sure to visit the Creative Day Job website!
Extended US Warranty: 5 Years Mechanical, 2 Years Electrical, 90 Days Adjustments on defects in material or workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Sewing Speed: Max. 2,200 spm
  • Needle bar stroke: 35mm
  • Presser Foot Lift: 5.5 mm
  • Needles Groz Bechart GB 134R
  • Bobbin: Double capacity "M" style
  • Drive System: Main shaft, direct drive
  • Motor: AC servo motor
  • Working Area: 457mm (long) x 254mm (high) (18" x 10")
  • Machine Weight: 26 kg (57lbs)
  • Main Table: 900x855mm (35.4" x 33.7")
  • Optional Extension: 400 x 855mm (15.7" x 33.7") each
  • Machine Head Made in Japan by Juki

    Options:
    Towa Gauge
    The perfect tool for setting M size bobbin case thread tension

    Open Toe Foot
    Quilting Foot with open circle for better visibility during free motion quilting

    Ruler
    3 sets to choose from. Each set will work with the Longarm with frame, sit down table and the TL Mini

    Learning Ruler Kit
    The Learning Ruler Kit gives you a reusable practice grid to preview your designs. A tube template tester to emulate the ruler foot of your machine. Use with your write erase pen. Super Grip Dots to steady your rulers on fabric.

    Glide Foot
    The glide foot is a bowl-shaped type foot intended to be used for quilting when gliding along applique and other slightly three-dimensional embellishment. The glide foot is an exclusive foot for the high-shank type m.

    Couching Foot
    The Couching Foot is used for sewing decorative thread, yarn, and much more. This set includes two different sizes of couching foot. Use the appropriate one according to the thickness of the material being sewn.

    Grip & Stitch™
    Make free motion quilting easy and fun with JUKI’s new Grip & Stitch™ quilting disks! Each pack comes with two different sized disks that provide outstanding support. With the larger disk in your left hand and the smaller disk in your right hand, place the disks on top of your quilt and begin quilting. Create funky spirals, beautiful feathers, and more!

    Click For Extension Table Setup Manual

    Information Below Applies Only to TL2200QVP Frame Model, not to TL2200QVP-S Sit Down Model. Handles are not included and not needed for free motion quilting where you are moving the fabric under the needle.

    Fabric Setup on the Juki TL-2200QVP Quilt Virtuoso Pro Quilting Frame


    Threading the TL-2200QVP Quilt Virtuoso Pro


    Setting the Thread Tension • TL-2200QVP Quilt Virtuoso Pro


    Winding the TL-2200QVP Quilt Virtuoso Pro Bobbin


    Right Needles and Bobbin for the TL-2200QVP Quilt Virtuoso Pro


Juki Miyabi 10' Free Motion Quilting Frame w/Front Handle Bar Controls for Sit Down Machines: for Juki J350S w/o Encoders* or TL2000QVPS with Encoders

Juki, Miyabi, 10', Free Motion Quilting, Frame ONLY, Juki, TL2000QVP, Sit Down model, head , Juki Miyabi 10' Free Motion Quilting Frame for Juki TL2000QVP-S Sit Down Machine +Handle Bar Controls and Encoders to add Stitch Regulation

Juki Miyabi 10' Free Motion Quilting Frame for Juki TL2000QVP-S Sit Down Machine +Handle Bar Controls and Encoders to add Stitch Regulation

Our Price: $5,500.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

Juki J-350QVP machine shown not included in this frame and electronics upgrade.

* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores



Click here to access the Juki warranty registration form

The Miyabi J-350QVP easily converts from a sitdown to a 5ft, 7ft, 10ft, and 12ft frame.


As a reflection of JUKI's Japanese heritage, the J-350QVP was named Miyabi meaning "Elegance."

Stand up Juki 10' frame that is made by The Grace Company.

Information Below Applies Only to QVP Frame Model, not to Sit Down Model. Handles are not included and not needed for free motion quilting where you are moving the fabric under the needle.

"Just took the Long Arm quilting class at Allbrands and it was awesome. The teacher Kay was so great and full of knowledge. Once you take the class you can rent the machine by the hour to quilt your own quilts!! Sign up, you won't regret it!!" Lisa M

Direct drive motor with metal gears without any belts makes the machine more responsive and quieter. Specifically the motor is built into the head on the main shaft and the lower shaft is turned by a gear, there is no belt noise.

It has 18x10" or 180 square inches of arm space, compared to 118" for Tin Lizzie 18x6", 144" for Handiquilter Avante 18x8", and 144" for Tin Lizzie 24x6" heads. That's 25% more arm space more than 18x8 or 24x6 arms.

  • Grace All Metal 10 foot 120" frame (expandable to 12 foot 144" frame with optional extension kit)
  • Compatible with $5000 Grace Quilt Motion, Grace $2000 Creative Touch Pad Upgrade, Robotic Quilting Systems.
  • Optional Set ups in 5' 60" Crip, 7' Queen, 10' 120" King 10'
  • Batting Rail Included
  • Quick Release system for Rails, including those with ratchets or tensioners.
  • Adjustable quilt frame leg Height up to 7" difference
  • Optional 2ft Extension to do 7" or 84" and 12' or 144"

    Attaching fabric to a Grace Quilting Frame Video:
Extended US Warranty: 5 Years Mechanical, 2 Years Electrical, 90 Days Adjustments on defects in material or workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Fabric Setup on the Juki TL-2200QVP Quilt Virtuoso Pro Quilting Frame

Juki Miyabi J-350QVP 18x10 Longarm Quilt Machine +5', 7' or 10-12' Free Motion Quilting Frame V4P7 Smart Stitch Optical Regulators, Thread Trim, Japan

Juki Miyabi J-350QVP, 18x10 Longarm Quilt Machine Head+5'-7'-10' Free Motion Quilting Frame, 110V SmartStitch Stitch Regulator, Auto Thread Trim, Japanr, Warranty, 4, No, Interest, Juki Miyabi J-350QVP 18x10 Longarm Quilt Machine +5'-7'-10'-12' Free Motion Quilting Frame V4P7 Smart Stitch Optical Regulators, Thread Trim, Japan

97115: Juki Miyabi J-350QVP S Sit Down 18x10in Longarm Free Motion Quilting Machine/Stand

Our Price: $8,999.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

Priced as a 5' Frame, 7'-10' and 12' lengths are priced when you confirm frame size., We have the 10' frame in stock.

* Juki Synchrony Financing 5 Years or 60 Months starting at $150 per month 0% plus tax for Synchrony No Interest Financing, Equal Monthly Pay. Apply online. Transaction Code 129 Synchrony Equal Monthly Pay Financing. Synchrony will advise you of your maximum amount of credit that you can use towards purchase. b>Please call 800-739-7374 for 60Mo 0% Interest Synchrony Sewing & More Financing OAC Using Transaction Code 129 on any J-350 Configurations. 60 Months 0% Not available for online checkout.

Click here to access the Juki warranty registration form

Quilters around the world have been waiting for a specialized machine like the J-350QVP. Discover the impressive 18 inches of horizontal throat space between the arm of the machine and the needle.

Even more impressive is the 10" height, unlike most long arm quilting machines which only provide an 8" height or less. All this amazing capability is mounted on a deluxe 10ft quilting frame.

By hand or software driven the Miyabi J-350QVP is a pleasure to drive with the built-in JUKI SmartStitch stitch regulator system.

Comes in 5', Click here to access the Juki warranty registration form

The Miyabi J-350QVP easily converts from a sitdown to a 5ft, 7ft, 10ft, and 12ft frame.


As a reflection of JUKI's Japanese heritage, the J-350QVP was named Miyabi meaning "Elegance."

Discover true elegance with the built-in stitch regulator JUKI SmartStitch!



JUKI Miyabi J 350QVP: Unique Features
In this video, we go over which features make the J-350QVP longarm unique. We hope you enjoy the video!

JUKI Miyabi J-350QVP Free Motion Quilting Machine and 5' 7' or 10'Quilting Frame. The only sit-down longarm quilter with automatic thread trimmers and built-in JUKI SmartStitch stitch regulator system. As a reflection of JUKI's Japanese heritage, the J-350QVP was named Miyabi meaning "Elegance." Discover true elegance with the built-in stitch regulator JUKI SmartStitch!

Quilters around the world have been waiting for a specialized machine like the J-350QVP. Discover the impressive 18 inches of horizontal throat space between the arm of the machine and the needle.

Karen Pharr, Juki representative, talks about the Juki sit-down model and a Juki frame. Check out the longarm thread cutter and the laser light on the Juki machine.

More You Tube Videos on Juki Miyabi J-350QVP S Sit Down

VIEW Prior Model BROCHURE HERE

Juki is the only longarm quilter with automatic thread trimmers. Quilting Frame and Stand is KD knocked down un-assembled, RTA ready to assemble.

Built In Basting, Laser Point Guide, Automatic Underbed Thread Trimmers, Big M Bobbins, Direct Drive Motor, Foot Control for Speed and Thread Trimming , Metal Gears, Dry Head Limited Oiling, Auxiliary Hand Wheel.

And yes, there will be a stitch regulator upgrade available for putting the TL2200QVP-S Sit Down head on the stand up Juki 5' 7' 10' or 12' frame that is made by The Grace Company.

SAME machine head as the standup model – can be put on a frame in the future

  • 18” deep X 10” high
  • Built in bobbin winder
  • Auxiliary hand wheel
  • THREAD TRIMMER!
  • Semi Dry head technology
  • Direct drive servo motor
  • Metal gear timed
  • Auto tie off feature
  • Basting stitch
  • And MORE

    Information Below Applies Only to QVP Frame Model, not to Sit Down Model. Handles are not included and not needed for free motion quilting where you are moving the fabric under the needle.

    "Just took the Long Arm quilting class at Allbrands and it was awesome. The teacher Kay was so great and full of knowledge. Once you take the class you can rent the machine by the hour to quilt your own quilts!! Sign up, you won't regret it!!" Lisa M

    Direct drive motor with metal gears without any belts makes the machine more responsive and quieter. Specifically the motor is built into the head on the main shaft and the lower shaft is turned by a gear, there is no belt noise.

    It has 18x10" or 180 square inches of arm space, compared to 118" for Tin Lizzie 18x6", 144" for Handiquilter Avante 18x8", and 144" for Tin Lizzie 24x6" heads. That's 25% more arm space more than 18x8 or 24x6 arms.

    The touch screen panel has many options. Automatic stitch regulation or manual speed control, up to 16 spi stitches per inch on stitch regulation. Needle programmed to always stops up or always stop down, automatic thread trimming or manual command, etc.

  • 18.25" x 10.25" oversize arm space to right of needle is the largest workspace of any 18" longarm on the market. (55% more workspace than Tin Lizzie 18x6" Arm. 25% more than HandiQuilter Avanti).
  • Side Mount Hand Wheel eliminates the need reach around to the back of machine for main hand wheel.
  • Independent M bobbin winding system allows winding bobbins while sewing, or when not sewing.
  • Front or back operation of the machine from front or back of quilting frame. Free motion from the front and pattern motion from the back with laser stylus included and optional quilting design templates or paper patterns on the table.
  • Grace All Metal 10 foot 120" frame a $3000 Value (expandable to 12 foot 144" frame with optional extension kit)
  • Stitch Regulator with X and Y encoders for the machine and platform which comes with machine.
  • Cruise Control Speed Settings as a % of 2200SPM maximum.
  • 6-16 Stitches Per Inch Settings for Stitch Length using Stitch Regulator
  • Baste to 3SPI Stitches Per Inch (1/2" 1" and 1.5"),
  • Presser Foot Adjustable Height for Fabric and Batting Thicknesses, 0-4mm with Slotted Presser Foot Height Adjustment
  • 0.5mm Recommended Distance from Bottom of Foot to Needle Plate when Foot and Needle are in lowest position. Adjustable for quilt thickness to prevent fabric from flagging (riding up and down on needle.)
  • 1/4" Tall, 1/2" Diameter All Metal Presser Foot for Rulers and Visibility.
  • Tack or Stay Stitch to make three stitches in place, and stop with needle up or down.
  • Needle Up or Down Settings will always stop with needle in fabric, or needle out of fabric
  • Needle Eye Guard to be installed at time of machine set up.
  • Presser Foot Lever to be installed at time of machine set up.
  • Two spool thread stand to be installed at time of machine set up.
  • Automatic or Manual Activation of both Top and Bottom Thread Trimming at the same time, the only quilting machine on the market with these features.
  • Super Bright LED No-heat lights above needle (4) and on both left and right handles (3 each).
  • Machine Bed Size: 18.25x10.25" (187 square inches) between needle and neck of machine
  • Speed: 2200 SPM Stitches Per Minute Maximum Speed Settings. Highest in Manual Free Motion Mode
  • Machine Head Weight 26Kg or 57 Pounds
  • Compatible with $5000 Grace Quilt Motion, Grace $2000 Creative Touch Pad Upgrade, Robotic Quilting Systems.
  • Optional Set ups in 5' 60" Crip, 7' Queen, 10' 120" King 10'
  • Batting Rail Included
  • Quick Release system for Rails, including those with rachets or tensioners.
  • Adjustable quilt frame leg Height up to 7" difference
  • Optional 2ft Extension to do 7" or 84" and 12' or 144"

    Unique Design
    The Quilt Virtuoso Pro has a slim sleek and sturdy design, unlike any Long Arm Quilting Machines to date!

    Extra Large Throat Space
    Discover the impressive 18 inches of horizontal throat space between the arm of the machine and the needle. Even more impressive is the 10 inch height, unlike most long arm quilting machines which only provide 6 to 8 inches of height

    Bright LED Lights
    10 Ultra Bright LED Light Bulbs over the needle and pattern area illuminate your workspace like never before, making it easy to see detailed work, while simultaneously reducing strain on your eyes.

    Built-in Scissors
    Convenient automatic scissors simultaneously trims the top and bottom thread. No other Long Arm Quilting Machine has this feature!

    Ergonomic Handles
    The QVP comes equipped with ergonomic handles for ease and comfort while quilting. The ergonomic handles swivel from vertical into horizontal micro handles for precise close up detailed work! No need for extra set of micro handles.

    Needle Up/Down
    Easily move the needle up or down with the included Needle Up/Down Button. If the machine is off you can use the easy to reach hand wheel on the front of the machine allowing you to raise and lower the needle without having to turn on the machine or reach all the way around to the wheel on the back of the machine.

    Independent bobbin winder/motor
    The built-in bobbin winder has its own motor independent of the machine, so you can wind bobbins while you continue to quilt or while the machine is idle.

    Ultra Glide Tracking System
    Eight Ball bearing wheels hug the track of the frame in a V shape, ensuring smooth even quilting at all times.Machine will not "jump" off the rails.

    Take-up Bar
    The take-up bar allows you to roll up your quilt all the way without making any adjustments to the frame, unlike most other quilting machine frames where you have to adjust the rails up and down as the quilt fills the machine throat. Idler or dead bar below take up bar holds the fabric down to the bed to prevent flagging of fabric which causes skipped stitches.

    Made in Japan
    The QVP is made and assembled entirely in Juki's leading industrial manufacturing plant in Japan - not in China or Taiwan. It used technology developed for Juki's line of industrial sewing machines which have been proven benchmarks for decades of production and use. The All Metal Frame is made by Grace in Salt Lake City, Utah.

    Leader in sewing and quilting
    Juki is the Leading manufacturer of industrial sewing machines worldwide. Juki has taken this industrial knowledge and experience and put it into this long arm quilting machine for home use. The result is a unique heavy-duty high quality long arm quilting machine that all quilters are sure to love. 400W Motor is the strongest in the industry.

    2,200 SPM Stitches Per Minute Maximum Sewing Speed
    Obtain faster results! The TL-2200QVP offers professional speed so you can complete projects in record time. You can quilt faster on a Juki QVP than any other quilting machine made for the home market.

    Stitch Control - Perfect Tension Balanced Stitches
    The stitch balance control allows you to deliver more consistent stitching according to your needs for a perfect finish on your quilt. Pretension knob guarantees correct length of thread tail after thread trimmer is activated.

    Built-in Stitch Regulator
    Start, stop, speed up and slow down the motor of the quilter delivering the exact amount of stitches per inch that you have set in with the built-in stitch regulator on the TL-2200QVP Quilter. 10-12 SPI Stitches per Inch Recommended.

    Four Stitching Modes
    Work on your project the way you see fit! With three different stitch modes (Cruise doesn't stop stitching, Precise stops stitching when you stop, Manual Free Motion up to 2200SPM, and Baste for .5 to 1.5" stitch length) you can set up your stitching preferences and obtain the results you are looking for without added effort.

    Large 3.5" Color Touch Screen LCD Display
    Maintain absolute control with a top of the line Color LCD touch panel display where you can manage the stitch regulator, light settings, needle speed, stitch length, sound, screen brightness and all you need to complete your masterpiece.

    Automatic Thread Trimmer
    The machine is equipped with an automatic thread trimmer device that simultaneously trims the needle and bobbin threads to 1/4" at the sewing end by lightly pressing the push-button. It uses the same industrial thread trimming mechanism that was invented by Juki for their high speed straight stitch machines starting with the DDL555 to DDL8700 and has been in proven use for decades.

    Adjustable Front and Optional Rear Handles
    Added comfort and maneuverability with the adjustable front and optional rear handles that will give you complete control over your project from any position around the machine. Front handles are used for free motion quilting. Read handles can be used for following patterns with laser stylus included.

    Handle Bar Controls
    Start/Stop with Right Handle Button - Needle Up/Down with Left Handle Button. Controls at the reach of your finger tips.

    Compatible with ¼ Inch Thick Rulers because the presser foot ring is 1/4" tall

    All Metal Solid Steel Heavy Duty Virtuoso Frame by Grace Frame

    Internal Motor
    Internal motor provides a quiet smooth operation, without any belt/noise.

    Dry Head System
    Thanks to the advanced dry-head technology (4 sealed permanent lubrication metal bearings on main shaft and 5 silicone impregnated and brass bushings throughout rest of machine) no lubrication is required except for the rotary hook section before each quilting project. This eliminates oil stains on the sewing product.

    Quick Response Direct Drive Motor - No Drift and No Belt to Slip
    For quiet and smooth operation.

    Easy Access Auxiliary Hand Wheel
    Obtain faster results! The TL-2200QVP offers professional speed so you can complete projects in record time.


    You can register your Juki machine purchase online with our new Registration page. Click here to Register.

    Juki QVP Product Brochure(.PDF)

    Juki QVP Longarm Sewing Machine Instruction Manual(.PDF)

    Juki Parts and Service Instruction Manual(.PDF)

    Juki QVP Instruction for Presser Foot Lift Installation(.PDF)




    Description & Specifications
    Sewing speed: Max. 2,200SPM Stitches Per Minuet
    Needle bar stroke: 35mm
    Lift of presser foot: 5.5mm
    Needle: GB, Organ or Schmetz 134R and equivalents.
    Lubricating oil: New Defrix Oil No.1, or any clear sewing machine oil.
    Dimensions of sewing machine: 22.2W x 46.0H x 73.0L (cm)
    Weight of sewing machine: 26 kg. 57 Pounds
    Rated power supply / Power consumption: 120V/140W 60Hz

    Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.

    "Miyabi" Juki J-350QVP Arrives by Rob Appell
    The Studio is almost finished as Rob Appell builds a serious power tool. Have fun watching Rob assemble the frame and of course a bit of skateboarding too. The Juki J350 Stand Up Mid Arm Quilting Machine will be a great addition to Making it Fun!

    Preview the New Juki MIYABI J -350QVP Longarm - JukiLongarmQuilting.com



    Juki Tech Brian Debrick and National Educator Karen Pharr train AllBrands staff on QVP April 19, 2013






    Attaching fabric to a Grace Quilting Frame Video:
Extended US Warranty: 5 Years Mechanical, 2 Years Electrical, 90 Days Adjustments on defects in material or workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Juki Miyabi J-350QVP Catalog Brochure

Juki Miyabi J-350QVP Instruction Manual

  • Sewing Speed: Max. 2,200 spm
  • Needle bar stroke: 35mm
  • Presser Foot Lift: 5.5 mm
  • Needles Groz Bechart GB 134R
  • Bobbin: Double capacity "M" style
  • Drive System: Main shaft, direct drive
  • Motor: AC servo motor
  • Working Area: 457mm (long) x 254mm (high) (18" x 10")
  • Machine Weight: 26 kg (57lbs)
  • Optional Extension: 400 x 855mm (15.7" x 33.7") each
  • Machine Head Made in Japan by Juki

    Options:
    Towa Gauge
    The perfect tool for setting M size bobbin case thread tension

    Open Toe Foot
    Quilting Foot with open circle for better visibility during free motion quilting

    Ruler
    3 sets to choose from. Each set will work with the Longarm with frame, sit down table, or the TL Mini

    Learning Ruler Kit
    The Learning Ruler Kit gives you a reusable practice grid to preview your designs. A tube template tester to emulate the ruler foot of your machine. Use with your write erase pen. Super Grip Dots to steady your rulers on fabric.

    Glide Foot
    The glide foot is a bowl-shaped type foot intended to be used for quilting when gliding along applique and other slightly three-dimensional embellishment. The glide foot is an exclusive foot for the high-shank type m.

    Couching Foot
    The Couching Foot is used for sewing decorative thread, yarn, and much more. This set includes two different sizes of couching foot. Use the appropriate one according to the thickness of the material being sewn.

    Grip & Stitch™
    Make free motion quilting easy and fun with JUKI’s new Grip & Stitch™ quilting disks! Each pack comes with two different sized disks that provide outstanding support. With the larger disk in your left hand and the smaller disk in your right hand, place the disks on top of your quilt and begin quilting. Create funky spirals, beautiful feathers, and more!

    Fabric Setup on the Juki TL-2200QVP Quilt Virtuoso Pro Quilting Frame


    Threading the TL-2200QVP Quilt Virtuoso Pro


    Setting the Thread Tension • TL-2200QVP Quilt Virtuoso Pro


    Winding the TL-2200QVP Quilt Virtuoso Pro Bobbin


    Right Needles and Bobbin for the TL-2200QVP Quilt Virtuoso Pro
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.