With Durkee’s new 4 x 4 Cap Frame simply load your design or logo into your machine, rotate90 degrees and stitch! Like all Durkee cap frames, simply apply self-adhesive (sticky) backing to the underside of the cap frame, secure the bill of the cap with the bill clamp, press the cap onto the backing, trace your design and stitch.

The 4 x 4 Cap Frame can also be used to stitch other projects such as baby bibs, tea towels, handkerchiefs, bandanas, and more!

Durkee 4x4 cap frame revised 11202020 from Brent Taylor on Vimeo.

See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:

Non-US Warranty: 30 days parts and labor.

Introducing Durkee’s Newest Single Needle Cap Frame Insert - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into a Brother 5"x7" Accessory #SA444 hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery

placement.
Introducing Durkee’s Newest Single Needle Cap Frame Insert - all metal frames allowing embroiderers to embellish caps with

monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into a Brother 5"x7" Accessory #SA444 hoop. The bill

of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky

backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement.

Includes Top Blue Frame only, you must have the bottom portion of the SA444 5X7 Embroidery Frame from Brother to use this item

Compatible with Brother’s Embroidery Hoop 5" x 7" Accessory #SA444 for the following machines:

NV1000 - NV1200 - NV1250D - PC6500 - PC8200 - PC8500 - PC8500D - PE700 - PE700II - PE770 - PE780D - Designio DZ820E - SB7900Et

See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:

Extended US Warranty: Lifetime warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Fits Inside SA439 or Babylock EF75 5X7 Hoops for Brother XP2 XP1 XJ1 XE1 XV8500 VM6200 VM5100 VM5200 VE2200 VE2300 VQ3600 VQ3500, NV6000 6700 6750 5000 4750 4500 4000 2800 2500 1500

Includes Top Blue Frame only, you must have the bottom portion of the SA439 5X7 Embroidery Frame from Brother to use this item

We are delighted to introduce our first new single needle cap frame insert, Introducing Durkee Single Needle Cap Frame Inserts - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into either a Brother 5"x7" Accessory#SA439 hoop or, Baby Lock 5" x 7" Item# EF75 Hoop.

See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:

Extended US Warranty: Lifetime warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Introducing the
Brother/Baby Lock Single Needle Power Pack
The Brother Luminaire and Baby Lock Solaris embroidery machines are the envy of the embroidery industry. These machines are jamb-packed with cutting-edge technological innovations and features few would have dreamed possible just a few years ago. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack Two compliments your machine and will help answer that question for you. First, imagine not having to hoop your projects with traditional plastic hoops. And, what if you could use your machine to do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible.
The set includes:

• one (1) cap frame insert
  
• four (4) single needle EZ Frames designed for your machine 4x4", 5x7", 9.5x9.5", 10 5/8 x 16"
  PLUS
  
• a bonus 8" x 8" (sewing field) single needle EZ Frame at NO CHARGE - an $89.95 value!
  
  See how embroidery can be made easier with Single Needle EZ Frames
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

  
  
  See how you can turn a plain ball cap into a personalized masterpiece
  
  

  The Durkee Single Needle Cap Frame Insert from Brent Taylor on Vimeo.

Non-US Warranty: 30 days parts and labor.

Introducing the
Brother/Baby Lock Single Needle Power Pack

As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. First, imagine not having to hoop your projects with traditional plastic hoops. Second, what if you could use your machine to do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible.
The set includes

• one (1) cap frame insert
  
• four (4) single needle EZ Frames designed for your machine: 4x4", 5x7", 8x12", 9.5x14"
  PLUS
  
• a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
  
  See how embroidery can be made easier with Single Needle EZ Frames
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

  
  See how you can turn a plain ball cap into a personalized masterpiece
  
  

  The Durkee Single Needle Cap Frame Insert from Brent Taylor on Vimeo.

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:

• 7x12
  
• 5x7
  
• 6x6
  
• 4x4
  
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:

• 6.5x10.25
  
• 5x7
  
• 6x6
  
• 4x4
  
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:

• 8x12"
  
• 5x7"
  
• 6x6"
  
• 4x4"
  
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:

• 7x12
  
• 5x7
  
• 6x6
  
• 4x4
  
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:

• 9.5x14
  
• 8x12
  
• 5x7
  
• 4x4
  
  See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
  
  
  
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Included in this package are the:

• 9.5x14
  
• 5x7
  
• 8x8
  
• 4x4
  
  
  

  Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.

Extended US Warranty: Limited Lifetime

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.

Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.

When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.

Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.

When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.

Non-US Warranty: 30 days parts and labor.

Non-US Warranty: 30 days parts and labor.

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines. Also newer models Stellaire and Luminaire.



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!

Non-US Warranty: 30 days parts and labor.

Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.

Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!

Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.

Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!

Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.

Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.

When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.

Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.

When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.

Non-US Warranty: 30 days parts and labor.

Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!

Non-US Warranty: 30 days parts and labor.

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!

Non-US Warranty: 30 days parts and labor.

If you've been looking for an alternative to traditional hooping with your Single Needle embroidery machine, then you need the Durkee’s new Single Needle EZ Frames! These frames are currently available for several models of Brother and Baby Lock single needle embroidery machines only. (Not for use with Brother Persona PRS100 or Baby Lock Alliance.)

Apply sticky backing to the underside of the EZ Frame. Then attach the fabric on the top of the EZ frame and backing. Attach EZ frame to your machine and then trace your design with your machine making sure the embroidery foot does not hit the frame and you are ready to embroider your design.

Please Note: Make sure that the EZ frame you are purchasing is equal to or smaller than the largest frame available for your machine. EZ frames do not make your embroidery machine sew an embroidery design any larger than the largest hoop available for your machine.

Non-US Warranty: 30 days parts and labor.

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!

Non-US Warranty: 30 days parts and labor.

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!

Non-US Warranty: 30 days parts and labor.