The Echidna Hooping Station is a versatile, easy-to-use accessory for accurate and efficient hooping. Infant & sleeve/leg platen sizes, Hoops Not Included

Have a small sewing space?
Only have a small hoop?
Have a smaller budget but still want the advantages of a hooping station?
The small Echidna Hooping Station is ideal for any and all of those! The smaller hooping station is ideal for tote bags, baby onesies, Embroida-Buddies, and even left chest placements on adult garments!

Features:

• Dual sided
  
• Non-slip surface
  
• Works with any hoop
  
• Easy-to-use magnets instead of screws
  
• Place the hoop anywhere on the board!
  
  How many times have you tried to hoop a small item, particularly a small piece of the clothing – often extra fabric from the article gets caught in with the hooping and the whole process ends in frustration. That's why every embroiderer needs to add one of these fantastic small hooping stations to their set of tools!
  
  Just like its big brother (the 14x8" Echidna Hooping Station), both the front and back surfaces of this smaller version are non-slip. Twelve repositionable magnets are included to hold your hoop firmly in place to allow for easy hooping and perfect embroidery placement.
  
  The double-sided ergonomic frame is set at an angle to eliminate stress on your wrists and is ideal for hooping small articles such as baby clothes, Embroider Buddy's and other small embroidery blanks that are often a challenge to hoop.
  
  Measurements
  
  Large side: Length – 43.5 cm (17") | Width – 20 cm (8")
  
  Small side: Length – 43.5 cm (17") | Width – 10 cm (4")
  
  This great, innovative embroidery tool has been developed in Australia by Echidna.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

The Echidna Hooping Station is a versatile, easy-to-use accessory for accurate and efficient hooping. Adult and youth platen sizes

Are you tired of chasing your embroidery hoop around the table when you are trying to hoop your fabric? Maybe you have trouble hooping straight.

No matter what hooping problem you struggle with, the Echidna Hooping Station can help eliminate your frustration. The non-slip surface and repositionable magnets (12 magnets included), hold your hoop firmly in place to enable easy hooping and perfect embroidery placement.

The double-sided ergonomic frame, which is set at an angle to eliminate stress on your wrists, is suitable to hoop pretty much any thing that can be embroidered.

Sizes

45cm x 42.5cm | 45cm x 33cm

The larger side measures 45 cms in length (17¾" ) and 42.5 cms (16¾") in width – great for hooping bigger garments, towels and projects or if using larger hoops.

The smaller side (flip the hooping station over to use the smaller side) measures 45 cms in length (17¾" ) and 33 cms (13") in width – ideal for smaller projects and smaller hoops.

This great, innovative embroidery tool has been developed in Australia by Echidna.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Package Includes: One (1) Hooping Pro Full Station, One (1) Hooping Pro Project Station w/One (1) set of Stabilizing Legs, and One (1) Hooping Pro "junior" Board w/ One (1) Additional Set of Stabilizing Legs

Non-US Warranty: 30 days parts and labor.

Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!

Non-US Warranty: 30 days parts and labor.

For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines. Also newer models Stellaire and Luminaire.



Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.

The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!

Non-US Warranty: 30 days parts and labor.

A well-known Executive in the embroidery industry once said, “There are only two major challenges in embroidery. The first is hooping.”
Then came the reply, “What is the second?”
“If you solve the first there is no second,” he said.

Introducing the
EZ Framer MAX

• Easy to understand - easy to use hooping device for the home or commercial embroiderer
  
• Eliminates table hooping/framing
  
• Cross-hair laser light makes centering designs quick and easy
  
• Lightweight - is portable or can be mounted permanently
  
• Use any hoop/frame from any manufacturer up to 16 1/2" O.D.
  
  See for yourself just how simple hooping and alignment can be going from start to finish with the
  EZ Framer MAX:
  
  

  EZ Framer Max from Brent Taylor on Vimeo.

Non-US Warranty: 30 days parts and labor.

Durkee is proud to introduce our new EZ Framer PLUS. The EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well.

Weighing less than 7 pounds, it is lightweight and totally portable.

The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface.

Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4".

Non-US Warranty: 30 days parts and labor.

Silicone mat with printed 1/2 inch grid provides a non-skid hooping surface. Easily find the centerpoint of any size or brand of hoop. The printed grid allows you to instantly measure by simply placing the hoop down on the mat.

The pink color allows PAL3 to really shine in hi-definition on the mat making centering even easier!

How to use:

• Place the Hoop Mat on a flat work surface
  
• Center the outer ring (standard hoop) or bottom metal frame (Snap Hoop Monster®) on the mat's grid
  
• Place stabilizer/fabric over the hoop
  
• Insert inner ring (standard hoop) or place magnetic top frame (Snap Hoop Monster®) on the fabric/stabilizer
  
  

Non-US Warranty: 30 days parts and labor.

Ten Reasons To Own The Durkee Hooping Pro

No Additional Purchases*for Tubular Hoops, Magnetic Hoops, Wooden Hoops, and Single Needle Hoops, No Additional Attachments or Fixtures Required.

Please note the project stations are sold separately.

Use almost any size hoop from any manufacturer including traditional tubular hoops, wooden hoops, or magnetic hoops. There are NO ADDITIONAL purchases to be made for parts, pieces, or fixtures to accommodate different size hoops.

Two Stations
Two Hooping Pro stations available – A “Full Station” for polo shirts, t-shirts, jackets, etc. and an optional narrower “Project Station” for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.

Cross-Hair Laser Light
The “Full Station” comes with a fully adjustable cross-hair laser light with articulating arm to assist in centering and aligning.

Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.

Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.

Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.

Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.

Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.

Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.

Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HP1/HP2PKGPackage Includes one (1) each Hooping Pro 1 (Full Station) and Hooping Pro 2 (Project Station)

Non-US Warranty: 30 days parts and labor.

Great for smaller, narrower embroidery projects such as shirt sleeves, pant legs,
Two Stations
Two Hooping Pro stations are available – An optional “Full Station” for polo shirts, t-shirts, jackets, etc. and the narrower “Project Station” on this page for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.

Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.

Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.

Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.

Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.

Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.

Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.

Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPElitePkgPackage Includes one (1) each: HP1 (Full Station), HP Infant Board, HP Junior Board, HP Plus Board, and two (2) HP2

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPInfant PkgPackage Includes: one (1) each: Hooping Pro 2 (Project Station) Plus HP Infant Board

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPJunior PkgPackage Includes: one (1) HP2 (Project Station) plus HP Junior Board

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPPlus PkgPackage Includes one (1) each: HP2 (Project Station) and a HP Plus Board

Non-US Warranty: 30 days parts and labor.

Durkee Hooping Station HPPlusAllBoardsPkgPackage Includes one (1) each: HP2 (Project Station), HP Infant Board, HP Junior Board, HP Plus Board

Non-US Warranty: 30 days parts and labor.

Up your sewing game with this set of three radical new products from Designs in Machine Embroidery!

Totally Tubular Hooping Station
The Totally Tubular Hooping Station holds a hoop in place while accurately positioning garments, fabrics, bags, totes and more. The non-slip surface provides a sturdy foundation for small to medium size hoops. The unique interlocking modular system’s elevated platform allows tubular item to easily slip over the hoop.

The Totally Tubular Hooping Station is an interlocking modular system that holds your hoop in place so you can accurately position garments, fabrics, bags, totes, and more. The non-slip surface provides a sturdy foundation for small to medium size hoops and the elevated platform allows tubular items to easily slip over the hoop.

Set Includes

• Two plates with screws
  
• One post
  
• One 8” x 13” hooping board with pre-drilled holes
  
• One 13” x 13” hooping board with pre-drilled holes
  
• One 8” x 13” hoop mat
  
• One 13” x 13” hoop mat
  
  Totally Tubular Pressing Station
  The interlocking modular system is perfect for adding shape and form to handbags, totes and purses. Easily press seams, sleeves and bag corners. It's the new school way to iron.
  
  Get stoked on the flexibility this system offers. The narrow 1 1/2"x 13" board works for pressing tight areas such as corners on bags and clutches while the 3" x 13" board easily accommodates children's garments, sleeves and handbags side panels. Use the 6"x13" board for garment necklines, totes, purses and even backpacks. Get peak professional ironing results with this totally groovy system- it's Totally Tubular!
  
  The Totally Tubular Pressing Station is an interlocking modular system perfect for adding shapes and form to handbags, totes, and purses. Easily press seams, sleeves, and bag corners. Get stoked by the flexibility this system offers. The narrow 1 1/2 in x 13 in. board works for pressing tight areas such as corners or bags and clutches while the 3 in x 13 in. board easily accommodates children's garments, sleeves, and handbag side panels. Use the 6 in x 13 in. board for garment necklines, totes, purses, and even backpacks.
  
  Wool Mats
  These two 100% wool press mats are made specifically for the Totally Tubular Pressing Station.
  
  
• Comes with two sizes: 3" x 13" and 6" x 13"
  
• Wool press mats provide a smooth surface for double-sided pressing
  
• Grips fabrics
  
• Protects loft of embroidery designs
  
• The pinnable, ½" thick felted wool mat can be used with or without steam

Non-US Warranty: 30 days parts and labor.

HoopMaster is a Revolutionary Tubular Hooping System. The Fixture is designed to be used on the
Station or the Freestyle Arm

The HoopMaster Station, FreeStyle Arm Portable Base
T-Square, Pocket Guide, and 100x100 size Fixture with FreeStyle Arm
300x200/ 360x200 fixture, 180x130 fixture, 60x40 fixture

Midwest Products has created an embroidery hooping system which is simple in design and built to withstand the punishment of a commercial embroidery environment. Even the most inexperienced employee will find it easy to use. HoopMaster will have new employees hooping quickly and accurately in no time at all. Your productivity and profitability will increase as well as the quality control your customers deserve. Put this innovative system to work for you. The many time saving and profit building features will quickly pay for themselves.

Extended US Warranty: 1 year replacement on defective or missing parts.

Non-US Warranty: 30 days parts and labor.

Durkee has taken the hassle out of hooping! The EZ Framer MAX is an easy, simple device anyone can use, understand, and enjoy that makes embroidery more fun!

Introducing the
EZ Framer MAX Pro Pack
The EZ Frames 12 PC Master Set and EZ Framer MAX are perfect partners for making your embroidery projects faster, easier, and more fun!
Most embroiderers agree their two greatest challenges with embroidery are hooping and centering a design within a hoop. Just imagine...no thumbscrews, no hoop pop-off, no hoop burn! With Durkee EZ Frames you don’t have to imagine! And, getting your garment perfectly centered on your frame or hoop has never been easier than now with the EZ Framer MAX!

EZ Framer MAX

• Easy to understand - easy to use hooping device for the home or commercial embroiderer
  
• Eliminates table hooping/framing
  
• Cross-hair laser light makes centering designs quick and easy
  
• Lightweight - is portable or can be mounted permanently
  
• Use any hoop/frame from any manufacturer up to 16 1/2" O.D.
  
  The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
  
• 1 1/2" x 4"
• 2" x 4"
• 2 1/2" x 4"
• 3" x 4"
  
• 3" x 8"
• 5" x 4"
• 5" x 8"
• 7" x 5"
  
• 8" x 8"
• 12" x 4"
• 12" x 8"
• Radius Frame
  
  See for yourself just how simple hooping and alignment can be going from start to finish with EZ Frames and the EZ Framer MAX:
  
  

  EZ Framer Max from Brent Taylor on Vimeo.

  
  
  

Non-US Warranty: 30 days parts and labor.

Master-Hooper® 830 is a machine embroidery and quilting aid designed to make hooping easier. Constructed from solid surface material the Master-Hooper® makes sure fabric and stabilizers remain flat, free of ripples & smooth. Uniquely designed to accommodate all machine embroidery hoop sizes.

Compatible with the following Bernina models: 185, 200, 430, 440, 630, 640, 730, 750, 770, 780, 790, 830 880 Instructions included. MH830 is sized for Bernina 830 embroidery hoops.

Approximately 19-3/4" L, 13" W, 5/8" thick & weighs 7lbs (Hoop not included)

Non-US Warranty: 30 days parts and labor.

You must already have the existing HP2 station to use this attachment.

This video explains all three additional station options for the HP2 Product Station.

Non-US Warranty: 30 days parts and labor.

The Totally Tubular Hooping Station holds a hoop in place while accurately positioning garments, fabrics, bags, totes and more. The non-slip surface provides a sturdy foundation for small to medium size hoops and the elevated platform allows tubular items to easily slip over the hoop. Easily slide tubular items such as baby snap suits, t-shirt, sweatshirts and more. Get peak professional hooping results with this totally groovy system - it's Totally Tubular!

The Totally Tubular System is easy to assemble and provides a non-slip surface for all your hooping needs.

• Works with Snap Hoops Monster or any standard embroidery hoop
  
• Fits hoop sizes up to 9.5" x 9.5"
  
  The Totally Tubular Hooping Station is an interlocking modular system that holds your hoop in place so you can accurately position garments, fabrics, bags, totes, and more. The non-slip surface provides a sturdy foundation for small to medium size hoops and the elevated platform allows tubular items to easily slip over the hoop.
  
  Set Includes
  
• Two plates with screws
  
• One post
  
• One 8” x 13” hooping board with pre-drilled holes
  
• One 13” x 13” hooping board with pre-drilled holes
  
• One 8” x 13” hoop mat
  
• One 13” x 13” hoop mat
  
  

Non-US Warranty: 30 days parts and labor.