Use the Hot Ruler to measure mark fold and press; deep hems long hems mitered corners. Perfect size rulers for large tasks at the pressing station. Keep this handy ruler by the iron to get the jobs you need done.

Non-US Warranty: 30 days parts and labor.

The Mini Iron II was designed to expand the creativity of every Crafter. This New Mini Iron II has special interchangeable tips that can be used for Quilting, Sewing and Crafting. The Mini Iron II Adapter set has four adaptable tips perfect for doll making, stenciling, paper crafting, hard to reach corners and all your innovative ideas.

Look what you can do with the Mini Iron II:

• Use ball tip to press open seams
  
• Use hot knife tip to cut stencils
  
• Use slim line tip to fuse bias in place
  
• Use large and small iron tips to iron hard-to-reach places

Non-US Warranty: 30 days parts and labor.

Hot Hemmer & Hot Ruler: Measure mark and press straight hems round interior and miter corners. Heat resistant press directly on the ruler. Can be used with dry or steam iron Unique non-slip surface holds fabrics in plce for precise results.

What is it?
Think about what we do when we construct any sewn project. Most likely we take large pieces of fabric and cut them into small pieces of fabric and then we sew them back together into large pieces of fabric again. And it's all done with some creative vision in mind. If we measure, mark, cut, pin, press and sew accurately the result is something that is pleasing to us. If we don't . . . ah well, then not so much. But there's more to consider. More effort and more time required. To put in a hem we have to make all of those measurements and the markings and then make all of the folds and then put in all of the pins to hold the folds we've measured. And then we have to press around the pins and then remove the pins. No question about it, it's a lot of detail work and if we mess it up we're going to be disappointed. There's gotta' be another way. And there is and that's where Clover's Hot Hemmer and Hot Ruler come in. For the first time we have a tandem of sewing tools that lets us accurately measure, mark and press all at the same time and with one tool.


What does it do?
Clover's Hot Hemmer and Hot Ruler will revolutionize the way you do hems, mitered corners and pressed curves. They truly are the "go to" tools for anyone who does hems, mitered corners or pressed curves. Both are made of a nylon based fiber board that does not retain heat when ironed on so no waiting for them to cool and no burned fingers. Another feature of the fiber board is that while it will not stick to your fabric it will not slide either. It merely stays in place while you manipulate your fabric into place for pressing. And best of all both are loaded with useful measuring and angle markings and cutouts. The Hot Hemmer is 6" x 5" with a rounded corner for pressing curves and a square cut out corner for measuring in and over at the same time. The Hot Ruler is 10"x 2 1/2" and is designed for completing longer hems in minimum time. If you're ironing hems for draperies, this is your tool.

The Hot Hemmer and Hot Ruler have many useful applications. Here are a few.

- Measure, fold and iron any hem in one smooth motion. Measure, fold, press. Repeat as necessary for the length or your project. The Hot Ruler with its increased length makes short work of long hems. Both take all of the guess work out of even, consistent hems. No last minute surprises where hem lines do not match up. Pleats anyone? Yes, you can use it to measure, fold and press pleats as well.

- Ever try to make a perfect 45° mitered corner? No problem. Just measure to desired depth at the desired point, fold your fabric along the miter line and press.

- How about pressing a curve, say to make a patch pocket. Again, no problem. Just gather your fabric around the curved portion of the Hot Hemmer and press. Remove excess fabric and attach to your garment.

- The corner cutout of the Hot Hemmer can be used "lefty" or "righty" to measure trim lines or seams. Quick, accurate and no mistakes.

- Saves time - We don't have to measure and mark hems, pin hems, iron around pins and then remove pins. And it's perfect every time so no "do overs".

Clover Hot Ruler and Hot Hemmer Extra Credit - VideoJoin Shannon and Jason Mullett-Bowlsby, the dynamic DIY duo known as the Shibaguyz as they explore Clover tools and give you their recommendations!

Non-US Warranty: 30 days parts and labor.

Clover Iron Shine Cleaning Pen. • Quick and easy cleaning removes build up from regular use. • Safe for metal or coated sole plates. • Water Soluble cleaning fluid.

Clover’s Iron Shine Cleaning Pen from the Press Perfect line by Joan Hawley is innovative across the board. The pen style applicator, scrubby tip and water-soluble cleaning fluid are a new approach to easily maintaining a clean iron with no mess or harsh fumes. The Iron Shine allows you to control the clean – see what you are doing, clean the whole iron or spot clean, safely work with the iron off. Safe for metal or coated sole plates, good for multiple cleanings.

How to Use the new Iron Shine Cleaning Pen by Joan Hawley

Tool School Session 4: Press Perfect Iron Shine Cleaning Pen

Non-US Warranty: 30 days parts and labor.

Our iron cleaner got even better. The new Extra Strength formula is designed to remove tough build-up of melted fusibles glues and interfacings from the bottom of your iron in seconds. Cleans hot glue guns too.

Non-US Warranty: 30 days parts and labor.

This new mini iron was designed to expand the creativity of every crafter by interchanging the tips this iron can be used for all of your innovative ideas. (Tips sold seperately)

Non-US Warranty: 30 days parts and labor.

MINI IRON II Cooling Tote Bag does not include tools or adapters. Tools and adaptors are sold separately.The New innovation of MINI IRON II was designed to expand the creativity of every Crafter. This New Mini Iron II has special interchangeable tips that can be used for Quilting, Sewing and Crafting. The MINI IRON II has five adaptable tips to be used for doll making, stenciling, paper crafting, hard to reach corners and all your innovative ideas.

Non-US Warranty: 30 days parts and labor.

Durable ironing surface is 100% cotton with a thick fiber pad and non-skid backing for secure use.,Iron on any sturdy surface. Rolls up with a velcro strip closure for storage or travel.,Size of ironing surface: 29-1/2" x 22-3/4". Travel roll size: 11.75" long x 4" diameter,Natural color.

-Iron on any firm surface, hand wash only
-100% cotton ironing area and thick fiber pad
-Non skid backing holds ironing pad in place for secure use
-Rolls up for storage or travel
-Velcro strip keeps blanket rolled
-Measuring 11.75 inches long x 4 inch diameter
-29.5 inch x 22.75 inch ironing surface

Non-US Warranty: 30 days parts and labor.

This iron is perfect for small corners, little pieces of fabric or small projects where a large iron is too bulky.

• Perfect for pressing "Quick Bias" in stained glass quilting, appliqueing, pressing seams, paper crafting, and many other sewing and quilting projects
  
• Easy to use on even the smallest details
  
• Heats up to operational temperatures in less than 10 minutes.
  
• Lightweight body only weighs 2.5 oz.
  
• Long 8 foot electric cord.
  
• Easy-glide sole plate.
  
• Multiple temperature control settings.
  
• On/Off switch built into cord.
  
• Mini Iron® stand included.

Non-US Warranty: 30 days parts and labor.

The pins "straddle" the intersection of the seams and keep the fabric from shifting while sewing. Great for matching plaids, and seam junctions.

The grip of the double pin is bent for ease in handling.

Very fine 0.56 by 40mm (approx. 1 1/2")
35 per package.

Non-US Warranty: 30 days parts and labor.

The pins "straddle" the intersection of the seams and keep the fabric from shifting while sewing. Great for matching plaids, and seam junctions.

The grip of the double pin is bent for ease in handling.

Very fine 0.56 by 40mm (approx. 1 1/2")
70 per package.

Non-US Warranty: 30 days parts and labor.

Especially desinged for the sewer or quilter working with seams or fabric folding projects

Non-US Warranty: 30 days parts and labor.

There hadn't been a new product for ironing in years - and I got sick and tired of using aerosol starch! So now I've introduced a clear, crisp starch with a lovely scent that makes ironing more enjoyable. It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

Non-US Warranty: 30 days parts and labor.

Sorry No Coupons. There hadn't been a new product for ironing in years - and I got sick and tired of using aerosol starch! So now I've introduced a clear, crisp starch with a lovely scent that makes ironing more enjoyable. It's in a non-aerosol bottle, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

Non-US Warranty: 30 days parts and labor.