December 21, 2024

Blind Hem Stitch Hemmer with Power Stand

S_6167_292
Power stand blindstitch hemmers are best for a combination of apparel and drapery. Portable blindstitch hemmers are only suitable for light to medium weight apparel, because the stitch penetration dial only has one revolution of adjustment, not enough lowering of the needle into heavier weight drapery fabrics. Blindhemmers are also not suitable for harder upholstery fabrics which cause too much needle deflection which can damage needles, skip stitches, or break thread. John Douthat "Unfortunately, none of the portable blindhemmers is recommended for doing draperies of any kind. The reason for this is that there is not enough room in the mouth (armspace between needle and neck) of the machine to allow for the wide hem of drapery (usually 4" - 4-1/2"). The maximum hem on a portable is about 2-1/2". For drapery applications, the best machine would be a true industrial type blindhemmer, like our MSK-755. The mouth, or opening has about 8" of space, for any variety of hems. We have sold hundreds of the MSK-755 for drapery and other hemming applications (like clothing), and it is the one I would recommend for drapery. I hope that helps. Robert Kahn, Reliable Corporation."

(Q) What type thread is used with this machine? Would thinner serger thread be ok?
(A) Yes, MaxiLock single strand polyester serger thread is fine. You can also use 100% nylon thread if it has some texture, as opposed to clear nylon (like fishline) which is more abrasive to metal parts. John

Janie, we couldn't find a very good image of an industrial machine curved-needle blindhem stitch online. It is a chainstitch with serger type stitch covering the hem/fold on the inside, and very little if any of the stitch or pull showing through on the right side. Most of the thread shows on the inside hem with very little showing on the outside. It is supposed to be invisible on the outside which is very difficult to do on very lightweight fabrics, unless you use the same color thread as the garment fabric. So the two sides are not supposed to look the same, like a zigzag stitch would on a sewing machine. We recommend portable blindstitch machines for garments, and power stand models for drapery or for faster speed on garments. Hope this information helps. John

(Q)When I pull the stitching out, several stitches unravel along with it. Is there a way to tack the stitches to prevent unraveling?
(A)Jenna, there are several ways of securing a blind hem stitch at the end of a seam. The easiest way is to sew over and beyond the end of a seam, especially if hemming a tubular item like pants. When you sew over previous stitching it helps to lock the stitches in. Before you remove fabric from the end of the machine feeder, turn the hand wheel clockwise to swing the needle all the way to the left position in the needle channel which will help secure the thread and stitch in place. Then quickly pull or jerk the fabric hem from behind the feeder which will break the thread and tie off the chain stitch so that it will not continue to unravel. It takes some practice because you may have to use the knee lever or hand wheel to position or release the fabric if it is not already at the end of the feeder. You can also turn the hand wheel counterclockwise at the end of the seam (like reverse stitching but no formation) just to hide the end stitches, or you can manually weave the unraveled thread back into the chainstitch with a seaming needle.





Consew 1118-4 Full Size Blind Hem Stitch Sewing Machine (like US Blindstitch 1118) 1/2HP Servo Motor Power Stand, Specify Assembled or KD Knocked Down

Consew 1118-4, Full size Industrial Blind Hem Stitch, Hemmer Sewing Machine, Power Stand, 3000 SPM, CurvedNeedle, KneeLever, CylinderArm, FREE $50 Needles

1512: Consew 1118-4 Full Size Blindstitch Hemmer Sewing Machine, Power Stand
Our Price: $3,999.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Perfect for sewing all weights of materials including synthetics, woolens, cottons, fabric and knits
  • 1 to 1 non-skip stitches, typical operations include felling edge tapes, bottoms of trousers, cuffs, wigging in sleeves, facings to canvas and knit goods, turned-up bottoms of fully lined coats, padding collars and lapels, and reinforcing seats
  • 2 to 1 skip stitch for hemming dresses, skirts, slacks, trousers, sportswear, ladies coats, draperies, blouses and other articles
  • Suitable for felling operations requiring a skip stitch to simulate hand-stitching
  • 2 to 1 skip stitch is recommended for synthetics and other lightweight materials and 1 to 1 for heavier cotton, woolen and linen goods
  • Stitch length adjustment by push button
  • Stitch depth penetration adjustment dials
  • Swing down, narrow cylinder arm allows for easy insertion and removal of work piece
  • Easy open, swing away work plate for extended working space
  • Stitch length max: 2-1/2" (3 mm - 9 mm) s.p.i.
  • Needle: 300 LG
  • Looper: 162
  • Cylinder diameter: 2-1/4" (57 mm)
  • Work space: 7" (180 mm)
  • Work plate dimensions: 361 mm x 153 mm
  • Stitch type: 103








    Blind Hemmer Ending Stitch Techniques
    I show how I now end my blind hemmer stitches. In the past I always used the old technique of raising the needle to its' highest position and releasing the pressure foot and jerking the fabric back quickly to break the thread. This led to size 10 needles skipping stitches sooner than I thought they should. I contacted the mfg of my machine and they told me to use the technique I show in this video. Since I've gone to it my #10 needles are lasting much longer. :) The machine shown is an Industrial Consew made in Japan back in the 1970s. Kevin Sews Published on Jul 2, 2014

    Please review our Freight LTL Shipping Policies
    Ships Ground Freight only.

Consew 1118-4 Full Size Blind Hem Stitch Sewing Machine (like US Blindstitch 1118) Head Only, No Table, Stand Or Motor

Consew 1118-4, Full size Industrial Blind Hem Stitch, Hemmer Sewing Machine Head Only, Consew 1118-4 Full Size Blind Hem Stitch Sewing Machine (like US Blindstitch 1118) Head Only, No Table, Stand Or Motor

106050: Consew 1118-4 Full Size Blindstitch Hemmer Sewing Machine Head Only
Our Price: $3,699.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Perfect for sewing all weights of materials including synthetics, woolens, cottons, fabric and knits
  • 1 to 1 non-skip stitches, typical operations include felling edge tapes, bottoms of trousers, cuffs, wigging in sleeves, facings to canvas and knit goods, turned-up bottoms of fully lined coats, padding collars and lapels, and reinforcing seats
  • 2 to 1 skip stitch for hemming dresses, skirts, slacks, trousers, sportswear, ladies coats, draperies, blouses and other articles
  • Suitable for felling operations requiring a skip stitch to simulate hand-stitching
  • 2 to 1 skip stitch is recommended for synthetics and other lightweight materials and 1 to 1 for heavier cotton, woolen and linen goods
  • Stitch length adjustment by push button
  • Stitch depth penetration adjustment dials
  • Swing down, narrow cylinder arm allows for easy insertion and removal of work piece
  • Easy open, swing away work plate for extended working space
  • Stitch length max: 2-1/2" (3 mm - 9 mm) s.p.i.
  • Needle: 300 LG
  • Looper: 162
  • Cylinder diameter: 2-1/4" (57 mm)
  • Work space: 7" (180 mm)
  • Work plate dimensions: 361 mm x 153 mm
  • Stitch type: 103








    Blind Hemmer Ending Stitch Techniques
    I show how I now end my blind hemmer stitches. In the past I always used the old technique of raising the needle to its' highest position and releasing the pressure foot and jerking the fabric back quickly to break the thread. This led to size 10 needles skipping stitches sooner than I thought they should. I contacted the mfg of my machine and they told me to use the technique I show in this video. Since I've gone to it my #10 needles are lasting much longer. :) The machine shown is an Industrial Consew made in Japan back in the 1970s. Kevin Sews Published on Jul 2, 2014

    Please review our Freight LTL Shipping Policies
    Ships Ground Freight only.

US Stitch Line SL718-2 Commercial Blind Stitch Hemmer Machine Head Only, No Power Stand, Made in Taiwan, Not China

drapery blindstitch, drapery blind stitch, drapery blindhem, drapery blind hem, drapery blindstitcher, drapery blindhemmer, U S Stitch Line, SL718-2, BlindStitch, Hemmer, Industrial, Sewing Machine, US Stitchline, SL7182, TAIWAN, Knee Lift, Curved,Needle, Skip Stitch, Power Stand, 2500 SPM

No longer comes with large drapery workplate attached to the machine.
Our Price: $1,499.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box

Features

  • Up To 2500 Stitches Per Minute
  • 1 To 1 Or 2 To 1 Skip Stitch Options
  • Knee Lever to insert and remove fabric
  • Needle Depth Dial for truly blind hems
  • Narrow Cylinder Arm
  • Swing Plate Work Table with access to Cylinder Arm
  • Full Size Industrial Blind Hemmer for Apparel and Drapery
  • Uses all 6 sizes of 251LG Organ blind stitch needles.
    Please specify T718-2 as the model number for English instruction book which will be sent separatly from the machine head







    For Reference Only: Installation and Operating Instructions for US Blindstitch Machines

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

US Stitchline SL718-2 blind hem machine parts list

  • Rugged, dependable blindstitch machine has a number of unique features for quality 1 to 1 non-skip and 2 to 1 skip stitch hemming
  • Re-engineered for greater quality
  • Upgraded by master technicians, this machine builds upon the technology that made the original a world leader
  • New presser foot, feed, and looper is re-designed for improved material handling and stitching, this machine feeds and lays out curtain and drapery panels, sides and bottoms evenly
  • New foot and looper assure positive stitching control with all threads and fabrics
  • New bronze needle connection assembly is an investment-cast eccentric, fitted to a bronze strap, ground, and lapped in to form a hard, smooth bearing surface, withstands years of abrasive wear
  • Hardened shafts are designed to reduce wear for a long life with minimal maintenance
  • Wide fabric range will handle light to medium weight fiberglass and rayons, as well as sheers
  • Works with a variety of threads including monofilament

    Video Only Shows US Blind Stitch 718 running, no sound


    Blind Hemmer Ending Stitch Techniques
    I show how I now end my blind hemmer stitches. In the past I always used the old technique of raising the needle to its' highest position and releasing the pressure foot and jerking the fabric back quickly to break the thread. This led to size 10 needles skipping stitches sooner than I thought they should. I contacted the mfg of my machine and they told me to use the technique I show in this video. Since I've gone to it my #10 needles are lasting much longer. :) The machine shown is an Industrial Consew made in Japan back in the 1970s. Kevin Sews Published on Jul 2, 2014

    Please review our Freight LTL shipping Policies

U S Stitch Line SL718-2 BlindStitch Hemmer Machine Made in Taiwan with Power Stand 2500RPM Servo Motor, Uses LWx5T same as 251LG Needles

drapery blindstitch, drapery blind stitch, drapery blindhem, drapery blind hem, drapery blindstitcher, drapery blindhemmer, U S Stitch Line, SL718-2, BlindStitch, Hemmer, Industrial, Sewing Machine, US Stitchline, SL7182, TAIWAN, Knee Lift, Curved,Needle, Skip Stitch, Power Stand, 2500 SPM

3903: U S Stitch Line SL718-2 BlindStitch Hemmer Machine, Power Stand
Our Price: $1,929.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box

Features


  • Up To 2500 Stitches Per Minute
  • 1 To 1 Or 2 To 1 Skip Stitch Options
  • Knee Lever to insert and remove fabric
  • Needle Depth Dial for truly blind hems
  • Narrow Cylinder Arm
  • Swing Plate Work Table with access to Cylinder Arm
  • Comes With 1/2 Hp Power Stand, 1725RPM
  • Assembled Table is 48"W x 20"D x 30"H Included
  • Full Size Industrial Blind Hemmer for Apparel and Drapery
  • Uses all 6 sizes of 251LG Organ blind stitch needles.
    Please specify T718-2 as the model number for English instruction book which will be sent separatly from the machine head









    For Reference Only: Installation and Operating Instructions for US Blindstitch Machines
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

US Stitchline SL718-2 blind hem machine parts list

  • Rugged, dependable blindstitch machine has a number of unique features for quality 1 to 1 non-skip and 2 to 1 skip stitch hemming
  • Re-engineered for greater quality
  • Upgraded by master technicians, this machine builds upon the technology that made the original a world leader
  • New presser foot, feed, and looper is re-designed for improved material handling and stitching, this machine feeds and lays out curtain and drapery panels, sides and bottoms evenly
  • New foot and looper assure positive stitching control with all threads and fabrics
  • New bronze needle connection assembly is an investment-cast eccentric, fitted to a bronze strap, ground, and lapped in to form a hard, smooth bearing surface, withstands years of abrasive wear
  • Hardened shafts are designed to reduce wear for a long life with minimal maintenance
  • Wide fabric range will handle light to medium weight fiberglass and rayons, as well as sheers
  • Works with a variety of threads including monofilament

    Video Only Shows US Blind Stitch 718 running, no sound


    Blind Hemmer Ending Stitch Techniques
    I show how I now end my blind hemmer stitches. In the past I always used the old technique of raising the needle to its' highest position and releasing the pressure foot and jerking the fabric back quickly to break the thread. This led to size 10 needles skipping stitches sooner than I thought they should. I contacted the mfg of my machine and they told me to use the technique I show in this video. Since I've gone to it my #10 needles are lasting much longer. :) The machine shown is an Industrial Consew made in Japan back in the 1970s. Kevin Sews Published on Jul 2, 2014

    Please review our Freight LTL shipping Policies

Reliable 2100IF Flatbead Top and Bottom Coverstitch Interlock Hemming Industrial Sewing Machine, Direct Drive, Differential Feed, Assembled Stand

Reliable, 2100IF, Flatbead, Coverstitch, Sewing, Machine, with, Direct, Drive, Reliable 2100IF Flatbead Bottom Coverstitch Interlock and Hemming Knits, Industrial Sewing Machine Direct Drive, Differential Feed, Assembled Stand

Reliable 2100IF Flatbead Coverstitch Interlock and Hemming Knits, Industrial Sewing Machine with Direct Drive and Assembled Stand
Our Price: $2,299.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Three needle coverstitch sewing machine with direct drive! The 2100IF flatbed coverstitch machine with advanced Direct Drive technology provides the flexibility of using either 2 or 3 needles for hemming, cover seaming as well as collarette work (with optional attachments). Direct Drive means there’s no more belt to replace and you get the most accurate speed control to fit every level of sewer’s needs. With easy to thread looper, no stain seal to trap and prevent oil from leaking, built-in release mechanism to allow for easy removal of the material and an eye and needle guard for your safety.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • MAXIMUM SEWING SPEED: 6,000 RPM
  • MAX STITCH LENGTH: 0.17”/4.4 mm
  • PRESSER FOOT LIFT: 0.25” (with 6.3 mm (with limiter) limiter)
  • NEEDLE SYSTEM #: UY128GAS
  • NEEDLE GUAGE: 0.22” or 0.25” 5.6 or 6.4 mm
  • NEEDLE BAR STROKE: 1.22”/31 mm
  • LUBRICATION: Automatic
  • DIRECT DRIVE TECHNOLOGY: Yes

Reliable 7200DB Drapery Blind Stitch Hemmer Machine, Direct Drive 6000SM DCServo Motor, Needle Positioner, Swing Arm, Assembled Stand Table, Uber Lamp

Reliable 7200DB Blind Hem Stitch Machine & Power Stand Table , Reliable, MSK-755, industrial, blindstitch, reliable industrial blindstitch, full size industrial blind stitch,blind stitch

Reliable 7200DB Drapery Blind Stitch Hemmer Machine, Direct Drive 6000SM DCServo Motor, Needle Positioner, Swing Arm, Assembled Stand Table, Uber Lamp
Our Price: $2,099.99
Prices are subject to change, and only current prices will be honored.

Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

ETA in 30 Days! The 7200DB drapery BlindStitch hemming machine is made for drapery workrooms that are sewing medium to heavy weight fabric, with or without blackout. The 7200DB with “thread nipping device” (to allow easier removal of the hemmed fabric) and direct drive technology allows for a smoother sewing operation and ensures the needle stops in the same position. Every time.

The all new 7200DB with direct drive technology is the sewing industry benchmark for excellence when productivity, durability, and stitch quality are your requirements. Skip stitch and adjustable stitch penetration allow you to fine tune from medium to heavier weight fabrics.

MADE FOR THE TOUGHEST FABRICS

Specially set up for drapery hemming, the 7200DB with “thread nipping device” (to allow easier removal of the hemmed fabric) and heavy-duty fittings (perfect for adding black-out material) offers the whole package. Direct drive, outstanding build quality and reliability.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Maximum Sewing Speed 1,700 RPM
  • Direct Drive Technology
  • Stitch Length 0 - 0.32” / 0 – 8 mm
  • Cylinder Diameter 2.23” / 58 mm
  • Presser Foot Lift 0.32” / 8 mm
  • Needle System #29 BL
  • Skip Stitch Function 1:1 – 2:1 True Skip Stitch
  • Protective Eye Guard
  • Swing-Away Plate

Reliable 7200SB Blind Hem Stitch Hemmer Machine, 6000SM Servo Motor, Needle Positioner, Assembled Power Stand Table, Uber Light Lamp Replaces 7100SB

Reliable 7200SB (MSK755) Blind Hem Stitch Machine & Power Stand Table , Reliable, MSK-755, industrial, blindstitch, reliable industrial blindstitch, full size industrial blind stitch,blind stitch

Reliable 7200SB Blind Hem Stitch Machine, Servo Motor, Lamp, Stand
Our Price: $1,799.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box

Features

Frame drop or plunger drop type? For a new machine, this is the main question. After 35 years in the frame drop camp, we can confirm that the plunger drop system is vastly superior, especially for today's light microfiber fabrics.

The all new 7200SB with direct drive technology is the sewing industry benchmark for excellence when productivity, durability, and stitch quality are your requirements. Skip stitch and adjustable stitch penetration allow you to fine tune from fine silks up to medium weight woolens.

QUALITY YOU CAN COUNT ON

For hemming pants, skirts and dresses, the 7200SB with “thread nipping device” (to allow easier removal of the hemmed fabric) offers the whole package. Direct drive technology, outstanding build quality and reliability.

  • Direct Drive
  • Quick Release & Lock Stitch
  • Adjustable Stitch Length
  • Adjustable Set Depth
  • Uberlight FLEX

Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Maximum Sewing Speed 2,500 RPM
  • Direct Drive Technology
  • Stitch Length 0 - 0.32 in. / 0 – 8 mm
  • Cylinder Diameter 2.23 in. / 58 mm
  • Presser Foot Lift 0.32 in. / 8 mm
  • Needle System #29BBL
  • Skip Stitch Function 1:1 – 2:1 True Skip Stitch
  • Eye Guard
  • Swing-Away Plate

Chandler CM101 Blind Hemmer Chain Stitch Sewing Machine, Knocked Down Unassembled Power Stand

Chandler, CM101, Blind Hemmer, Single Thread, Chain Stitch, Industrial , Sewing Machine, CM-101, Curved Needle, Knee Lever, Skip Stitch, Assembled Power Stand

12414: Chandler CM101 Blind Hemmer Chain Stitch Sewing Machine, Power Stand
Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

With Skip And Non-Skip Stitch Lever, Swing-Down, Narrow Cylinder Arm, Adjustable Thread Tension, 1 To 1 Non-Skip Stitch, and 2 to 1 Skip Stitch

Blind Stitch Hemmer Machines do in minutes what would take you hours in hemming by hand with sewing needles.

Has no equal... Saves time, labor and nerves.
Sews all materials with a beautiful positive blind stitch.
Skip and non-skip stitch lever
Swing-down, narrow cylinder arm
Adjustable thread tension
1 to 1 non-skip stitch
2 to 1 skip stitch

For Reference Only: Installation and Operating Instructions for US Blindstitch Machines
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications





Blind Hemmer Ending Stitch Techniques
I show how I now end my blind hemmer stitches. In the past I always used the old technique of raising the needle to its' highest position and releasing the pressure foot and jerking the fabric back quickly to break the thread. This led to size 10 needles skipping stitches sooner than I thought they should. I contacted the mfg of my machine and they told me to use the technique I show in this video. Since I've gone to it my #10 needles are lasting much longer. :) The machine shown is an Industrial Consew made in Japan back in the 1970s. Kevin Sews Published on Jul 2, 2014

Please review our Freight LTL Shipping Policies
Ships Ground Freight only.

Gemsy Jiasew G2000-8 Full Size Industrial Blindstitch Machine, Knee Lift, Swing Plate, Cylinder Arm, Skip Stitch, KD Power Stand* 3000SPM, 110V & 220V

Jiasew by Gemsy G2000-8 , industrial blind stitch ,industrial blindstitch,gemsy blindstitch, Gemsy Jiasew G2000-8 Full Size Industrial Blindstitch Machine, Knee Lift, Swing Plate, Cylinder Arm, Skip Stitch, KD Power Stand* 3000SPM, 110V & 220V

Gemsy Jiasew G2000-8 Full Size Industrial Blindstitch Machine, Knee Lift, Swing Plate, Cylinder Arm, Skip Stitch, KD Power Stand* 3000SPM, 110V & 220V
Our Price: $999.00
Prices are subject to change, and only current prices will be honored.

Availability: Please contact us for availability.
Condition: New In Box

Features

*KD Unassembled. FREE $70 Organ Box of 50 LWx6T 29-34, 6 Asst. Size Curved Needles, Portable Blind Hem Stitch Machines Tacsew Reliable USStitch Yamata Gemsy Rex Tony HueiHwang

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Model: G2000-8
  • Speed : 2,500 S.P.M.
  • Stitch lenght : 8MM
  • Skip-stitch device: １：１　&　２：１
  • 200W Clutch motor or 500W Servo motor
  • Needle : LW X 6T (#11-#14)
  • N.W. : 20 KGS
  • G.W. : 26KGS
  • Motor : Single or Three phases, 400W Clutch motor
  • Measurement : 0.08 CBM





    Blind Hemmer Ending Stitch Techniques
    I show how I now end my blind hemmer stitches. In the past I always used the old technique of raising the needle to its' highest position and releasing the pressure foot and jerking the fabric back quickly to break the thread. This led to size 10 needles skipping stitches sooner than I thought they should. I contacted the mfg of my machine and they told me to use the technique I show in this video. Since I've gone to it my #10 needles are lasting much longer. :) The machine shown is an Industrial Consew made in Japan back in the 1970s. Kevin Sews Published on Jul 2, 2014

    Please review our Freight LTL Shipping Policies
    Ships Ground Freight only.

Superior 9552 Needle Eye, Finger Safety Guard for Blindstitch Sewing Machines

Diamond 9552, superior 9552, Needle Eye & Finger Safety Guard for US BlindStitch, Any Portable or Power Stand Model Machine with Screw Down Top Front Thread Guide*

41363: Superior 9552 Needle Eye & Finger Safety Guard for Blindstitch Machines
Our Price: $29.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

*Remove screw that holds top front thread guide and replace with longer screw that will hold both the thread guide and the see thru needle eye and finger safety guard

*Only Reliable MSK588 Portable Blindstitch Machines have the needle eye guard already included with their machines.

  • Plexiglass is used for eye guards and all see-thru devices. Easy to work. Drill, cut, bend, etc. from 12" x 12" sheets.
Non-US Warranty: 30 days parts and labor.

Diamond 9552 Needle Eye and Finger Safety Guard for Portable or Power Stand BlindStitch Machine with Screw Down Top Front Thread Guide, Reliable*

Diamond 9552 Needle Eye & Finger Safety Guard for US BlindStitch, Any Portable or Power Stand Model Machine with Screw Down Top Front Thread Guide*

41253: Diamond 9552 Needle Eye/Finger Safety Guard for BlindStitch Machines*
Our Price: $19.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

* Reliable MSK588 Portable Blindstitch Machines have the needle eye guard already included with their machines.

  • Plexiglass is used for eye guards and all see-thru devices. Easy to work. Drill, cut, bend, etc. from 12" x 12" sheets.
Non-US Warranty: 30 days parts and labor.

Superior SO5Gal SewLube Sewing Machine Oil 5 Gallon: Juki and Industrial Sewing Machine Reservoir Pans, Refill Bottles, Tubes

Superior, # SO, SMO-GW , One Gallon, Lily White, "Stainless" Oil, for Industrial Sewing Machine, and Serger, Auto Oil, Bath Reservoirs, - Replaces ,Juki Defrix Oil, N.LA, Superior #SO SEW LUBE 1-Gallon White Stainless Non-Detergent Oil USA, Industrial Sewing Machine & Serger Auto Oil Bath Reservoirs (Juki Defrix NLA)

64450: Superior SO5Gal SewLube Sewing Machine Oil 5 Gallon: Reservoir Pans
Our Price: $199.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Clear Mineral Oil Based Stainless Non Detergent Oil for Industrial Sewing Machines and Serger Oiler Refill, also Auto Oil Bath Lubrication Reservoirs in Oil Pan Under the Machine Head.

  • Dyno Lily White (ISO-22) low viscosity crystal clear oil is a highly refined consistent viscosity and non-detergent mineral oil.
  • Ideal for sewing and extile machinery and parts. Specially formulated for use in high speed sewing machines.
  • Colorless and stainless, Dyno Lily White oil inhibits rust and controls oxidation
  • Excellent for use in applications where the oil may come into contact with the fabric.

    Ships by Ground or ocean transport only. Considered Hazardous to ship by air.

    SEW - LUBE OIL, Lily White Machine Oil #SO, Made in U.S.A.
    Low viscosity, water white lubricating oil for sewing machines, textile machinery and parts. Excellent for use in applications where oil may come in contact with fabrics.

    Contains: Hydrotreated Paraffinic Oil (CAS No. 72623-86-0)

    Caution: Consult Material Safety Data Sheet (MSDS) prior to use. Use in strict accordance with all information contained on MSDS.

    Hazard Rating: Health - O (Insignificant) Fire - 1 (Slight), Reactivity 0, (Insignificant)

    For Chemical Emergency: Spill, Leak, Fire Exposute or Accident - Call CHEMTREC - Day or Night 1 800-424-9300 or 202-483-7616.

    Dyno Chemicals and Lubricants
Non-US Warranty: 30 days parts and labor.

Specifications

How To Add Oil To An Industrial Sewing Machine
Using the Reliable 3300SD single-needle sewing machine with direct drive, our technical manager here at Reliable will show you how to oil your industrial sewing machine and ensure it stays properly lubricated.

Superior SO Sew Lube Sewing Machine Oil 1 Gallon for Juki and Industrial Sewing Machine Reservoir Pans, Refill Oilers, Tubes

Superior, # SO, SMO-GW , One Gallon, Lily White, "Stainless" Oil, for Industrial Sewing Machine, and Serger, Auto Oil, Bath Reservoirs, - Replaces ,Juki Defrix Oil, N.LA, Superior #SO SEW LUBE 1-Gallon White Stainless Non-Detergent Oil USA, Industrial Sewing Machine & Serger Auto Oil Bath Reservoirs (Juki Defrix NLA)
Our Price: $49.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Clear Mineral Oil Based Stainless Non Detergent Oil for Industrial Sewing Machines and Serger Oiler Refill, also Auto Oil Bath Lubrication Reservoirs in Oil Pan Under the Machine Head.

  • Dyno Lily White (ISO-22) low viscosity crystal clear oil is a highly refined consistent viscosity and non-detergent mineral oil.
  • Ideal for sewing and extile machinery and parts. Specially formulated for use in high speed sewing machines.
  • Colorless and stainless, Dyno Lily White oil inhibits rust and controls oxidation
  • Excellent for use in applications where the oil may come into contact with the fabric.

    Ships by Ground or ocean transport only. Considered Hazardous to ship by air.

    SEW - LUBE OIL, Lily White Machine Oil #SO, Made in U.S.A.
    Low viscosity, water white lubricating oil for sewing machines, textile machinery and parts. Excellent for use in applications where oil may come in contact with fabrics.

    Contains: Hydrotreated Paraffinic Oil (CAS No. 72623-86-0)

    Caution: Consult Material Safety Data Sheet (MSDS) prior to use. Use in strict accordance with all information contained on MSDS.

    Hazard Rating: Health - O (Insignificant) Fire - 1 (Slight), Reactivity 0, (Insignificant)

    For Chemical Emergency: Spill, Leak, Fire Exposute or Accident - Call CHEMTREC - Day or Night 1 800-424-9300 or 202-483-7616.

    1 U. S. Gallon (3.8 Liters). Dyno Chemicals and Lubricants
Non-US Warranty: 30 days parts and labor.

Specifications

How To Add Oil To An Industrial Sewing Machine
Using the Reliable 3300SD single-needle sewing machine with direct drive, our technical manager here at Reliable will show you how to oil your industrial sewing machine and ensure it stays properly lubricated.

Superior SO55 SewLube Sewing Machine Oil 55 Gallon Drum Barrel, for Juki and Industrial Sew Reservoir Pans, to Refill Tubes, Quarts, Gallon Containers

Superior, # SO, SMO-GW , One Gallon, Lily White, "Stainless" Oil, for Industrial Sewing Machine, and Serger, Auto Oil, Bath Reservoirs, - Replaces ,Juki Defrix Oil, N.LA, Superior #SO SEW LUBE 1-Gallon White Stainless Non-Detergent Oil USA, Industrial Sewing Machine & Serger Auto Oil Bath Reservoirs (Juki Defrix NLA)
Our Price: $999.99
Prices are subject to change, and only current prices will be honored.

Availability: Please contact us for availability.
Condition: New In Box

Features

Clear Mineral Oil Based Stainless Non Detergent Oil for Industrial Sewing Machines and Serger Oiler Refill, also Auto Oil Bath Lubrication Reservoirs in Oil Pan Under the Machine Head.

  • Dyno Lily White (ISO-22) low viscosity crystal clear oil is a highly refined consistent viscosity and non-detergent mineral oil.
  • Ideal for sewing and extile machinery and parts. Specially formulated for use in high speed sewing machines.
  • Colorless and stainless, Dyno Lily White oil inhibits rust and controls oxidation
  • Excellent for use in applications where the oil may come into contact with the fabric.

    Ships by Ground or ocean transport only. Considered Hazardous to ship by air.

    SEW - LUBE OIL, Lily White Machine Oil #SO, Made in U.S.A.
    Low viscosity, water white lubricating oil for sewing machines, textile machinery and parts. Excellent for use in applications where oil may come in contact with fabrics.

    Contains: Hydrotreated Paraffinic Oil (CAS No. 72623-86-0)

    Caution: Consult Material Safety Data Sheet (MSDS) prior to use. Use in strict accordance with all information contained on MSDS.

    Hazard Rating: Health - O (Insignificant) Fire - 1 (Slight), Reactivity 0, (Insignificant)

    For Chemical Emergency: Spill, Leak, Fire Exposute or Accident - Call CHEMTREC - Day or Night 1 800-424-9300 or 202-483-7616.

    Dyno Chemicals and Lubricants
Non-US Warranty: 30 days parts and labor.

Specifications

How To Add Oil To An Industrial Sewing Machine
Using the Reliable 3300SD single-needle sewing machine with direct drive, our technical manager here at Reliable will show you how to oil your industrial sewing machine and ensure it stays properly lubricated.

Yamata FESM550N 3/4HP Variable Speed Servo Motor, Quiet Clutchless Brushless for Industrial Sewing Machine Tables, 15mm Shaft, Max 200-3750RPM,

FESM 550N, Quiet, HighTorque, Clutchless, DC Servo, Motor FESM550N, 110V, 3/4HP, 550W, 3300RPM, Replaces, Industrial, Sewing Machine, Clutch Motor, Yamata Feiyue

11456: Yamata FESM550N 3/4HP Variable Speed Servo Motor, Quiet Clutchless, Brushless
Our Price: $189.95
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box

Features

There are many configurations of existing clutch motor installations. Some modifications may need to be made to mount the new motor and line up the motor pulley with hand wheel.

The only 550 Watts 3/4 HP Electronic Servo Motor in the market. The FESM-550C/N is quiet, powerful and energy saving. Features an easy to use speed adjustment knob and AMCO shaft, it is perfect for use from High Speed sewing machines to Low Speed Walking Foot machines.

  • LED Powered On/Off Switch
  • High Torque D.C. Electronic Servo Motor
  • Replacement for standard clutch motors
  • Variable Speed with connection to your stand pedal
  • Doesn't run unless stand pedal is depressed so is ULTRA QUIET
  • The motor is direct, strong and quiet. Comes complete with mounting hardware
  • AMCO style shaft for easy pulley exchange
  • Easy to use speed adjustment knob
Extended US Warranty: 1 year replacement on defective or missing parts.
Non-US Warranty: 30 days parts and labor.

Specifications

3/4 Horsepower DC
110 Volt AC Power Cord
550 Watts (Only One In Market)
0 to 3300 RPM 2 in 1 Motor (High/Low Speed)



FESM-400N (400W) - FESM-550N (550W)

Family Electronic Servo Motor

Watts: FESM-400N - 400 Watts
Watts: FESM-550N - 550 Watts

Power: 110V Single Phase
Rotation: Bi-directional (Through switch)
RPM: 0-3450 RPM

Description: High Torque D.C. Compact Electronic Servo Direct Motor

Adjustment: Easy to ajust FINE TUNE speed adustment dial
Light Socket, Energy Saving, High Torque, Quiet

Shaft: AMCO Shaft - Weight: Approximately 28 Lbs

Available in 400Watts and 550Watts - Compact Design with high torque and low noise.

Changing a Clutch Motor to a Servo Motor. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.

Superior SR-2 Dual Speed Reducer 3" 6" 9" Pulley, Install Between Machine Hand Wheel and Clutch or Servo Motor under Industrial Sewing Power Stands*

Superior, SR-2, Speed, Reducer, 3", 6", 9", Pulley, to, be, installed, between, Handwheel, and, Motor, Pulley, on, Your, Industrial, Sewing, Machine, and, Power, Stand

13324: Superior SR-2 Speed Reducer 3" 6" 9" Pulleys, Install Between Motor & Handwheel
Our Price: $199.99
Prices are subject to change, and only current prices will be honored.

Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

Speed Reducer installation may not be on industrial sewing machine power stands that already have or include the new Variable Speed DC Servo Motor installations. Just for older style Speed Clutch motors. SR2 speed reducer with 3″ 6″ and 9″ pulley. Installes between handwheel and motor pulley giving more torque in addition to lowering speed from 1/2 to 1/3 of machine speed. Requires special installation and belts.

  • Cast Iron
  • Ball Bearing
  • 2 Speed Reducer with Adjustable Belt Tightener Mechanism

  • The speed reducer is an optional accessory for industrial sewing machines that you install to reduce the speed of the hand wheel and main shaft to 1/2 or 1/3 of its speed. Does not include the belts you need to replace the single belt that came with your machine.
  • It is absolutely necessary if you plan to stitch on leather, upholstery, or other thick materials, otherwise it would be impossible to control the stitches when sewing on a high-speed industrial sewing machine.
  • For example, a 2500 stitches per minute industrial sewing machine would sew 1250 stitches per minute with a speed reducer installed.
  • Made in the USA
  • Manual greasing

    SR2 speed reducer with 3″ 6″ and 9″ pulley. Installs between hand wheel and motor pulley giving more torque in addition to lowering speed from 1/2 to 1/3 of machine speed. Requires special installation and belts.

    Note: If you are considering a servo motor replacement for clutch motor to get better control over speed, remember that the slower the speed on the servo motors the less torque you get. It is to be considered when dealing with long arms and some walking foot machines depending on the density of the materials being sewn. Joe

  • Directions for installing reduction pulley mechanism in industrial sewing machines
Extended US Warranty: 30 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Reliable SewQuiet 6000SM Variable Speed DC Servo Motor 110V, Step Stitch, 12 Coils, More Torque,Replaces SQ5000, Includes SYCH Needle Stop Positioner*

Reliable, Sew Quiet, 6000SM, SQ5000, SQ4000, Brushless, DC Servomotor, 600W, 3/4 Horsepower, Digital Speed Control, Regular and Reverse Directions, Fused Overload Protection, Reliable SewQuiet 5000 No Clutch No Brush DC Servo Motor 600W 3/4HP Digital LED Speed Control, Reverse Switch, Fused Overload, Aux Power Outlet, Reliable SewQuiet 5000 NoClutch NoBrushes DC ServoMotor, 110V, 600W, 3/4HP, Digital LED, Speed Control, Reverse Switch, Overload Fuse, Aux Power Outlet, 60mm Pulley

62972: Reliable SewQuiet 6000SM Variable Speed DC Servo Motor +SYCH Positioner*
Our Price: $219.99
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

ETA 3rd week of September 2022,Not Compatible with Pfaff machinesPlease note: No, our synchronizer does not work on Adler, Pfaff or some Consew machines because of the difference in shaft size and diameter compared to Reliable machines we make them for. .


"I installed the 6000sm today. It does exactly what i need it to do. I did set the speed to maximum at 1700. Plenty fast enough for me. The slow speed control is phenomenal! Installation was super simple.
I was able to use the same belt. I love it when a plan comes together!" Gregg G. Baton Rouge 2/21/20.

The SYNC synchronizer kit comes with two shoulder screws that are 7MM and 8MM diameter. The screws fit in the end of the upper shaft and hold the hub in place. Remove the existing screw and measure it to be sure of the size, before ordering motor with SYNC or SYNC by itself. SYNC does not fit on some older Consew and Singer that it cannot be installed on.

Needle stop down is good for turning corners, Needle stop up is better for inserting and removing materials under the foot and needle.

*Pair your 6000SM servo motor with SYCH needle stop position synchronizer for precise control of your sewing operation. SYCH will not fit the some models of older Consew (see below) and Singer (31-20)

Motor is Brushless, Clutchless, with 60mm Pulley, 12 Coil Motor, and Light Plug In Receptacle The 12 coils feature offers more torque and is just as easy or easier to control versus the 9 coils motors.

Beauty and Brawn
The SewQuiet 6000SM brushless DC servomotor is a modern-day marvel of ingenuity and technology, crafted and designed to exceed your expectations. This is the only servomotor to incorporate a full 12-coil (vs. 6 or 9) design. This provides unparalleled power and torque, the kind of torque that’s needed to work with the toughest materials. And for those looking to add a synchronizer to your motor, it’s now available as a low cost stand-alone option.

Calibrated Control
The SewQuiet 6000SM represents the fourth generation of Reliable’s energy saving servomotor innovation. Precision step-by step stitching for detailed sewing, the ability to plug in a grounded light directly to the rear of the motor, UL/CSA certified electrical components and the total silence that gives the SewQuiet its name… the new 6000SM takes everything we’ve learned about motors over the past 60 years to new heights.

Main Features
• 550W power
• More torque than conventional clutch or servomotors
• Up to 75% energy savings
• Digital speed control
• Clockwise and counterclockwise directions
• Built-in overload protection
• Instruction manual with speed settings included

Includes one 60mm installed pulley

This is a breakthrough in servomotor technology, the first 12-coil design, the torque is so strong you can't hold the pulley with your hand (more torque even then a clutch motor).

Reliable Newest Model 6000SM Motors are now shipping, 550 Watts, 3/4HP Motor Brushless, No Clutch, Dial RPM Speed Control, Reverse, 2 Overload Fuses, Auxillary Power Outlet

"Step Stitch will give you the stitch by stitch speed control you need. The servo motor variable speed is affected by the torque of the machine mechanics and materials being sewn more than just the torque of the motor. Some machines will have better variable speed control than others depending on the torque of the machine (how easy it is to turn the hand wheel over materials being used). The speed control dial is digital, and cannot be preset to exact stitches per minute, only RPM because of the differences in machines and materials." John Douthat, Owner and Tech

Other Features

You can set the speed on these motors from 100 rpm up to 3800 rpm in 100 rpm increments.

*Exclusive Electronic Controlled "Step Stitch" Function allows for one stitch at a time sewing by leather workers or anyone who needs stitch by stitch control for small items and turning corners.

More torque at 600W than conventional clutch or servomotors at 400-550W, replacement, for existing clutch motors with no speed control, or undependable dc motors, Up to 75% energy savings!

NO CLUTCH, NO BRUSHES, NO PROBLEM: The SewQuiet 6000SM brushless DC servomotor is designed to operate all light to heavy-duty industrial sewing machines.

The brushless DC servomotor design which has very good torque even at low speeds; uses a laser sensor instead of a traditional mechanical clutch. This design gives the operator a graded acceleration compared to the abrupt type of acceleration common with a clutch motor.

QUIET AND CONTROLLED: With the SewQuiet 6000SM, the noise that is normally associated with sewing motors (clutch and servo) is almost entirely eliminated, creating a more pleasant work environment.

Whether you are an advanced sewer or a beginner, the SewQuiet 6000SM's microprocessor controller gives the user an unparalleled connection to the sewing machine, allowing for speed or detailed work. A "stepping" speed can be achieved which allows for literally, a step by step control of the sewing speed. This makes sewing detailed work much easier.

From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice.

SIMPLE SET-UP
Everything you need to get your Sewquiet up and running is supplied in the box.


Reliable Warranty Information (.PDF)


Reliable 6000SM Information Sheet (.PDF)


Reliable 6000SM Information Sheet and Listing of Error Codes (.PDF)


"Installed Sew Quiet on Tacsew 226RB. Seems like unlimited power. I had to turn it down to about 25% to slow it down. It still had tons of torque" 600W vs 400W Clutch, No Belt. Seth, AllBrands Mechanic


Roots
Reliable has lived and breathed every aspect of sewing machines since Milton Kahn started the business more than 5 decades ago. Quality control, expert service and advice are just a few of the things that make Reliable the leading commercial sewing and garment care manufacturer in North America.

Sewing machines may not have changed much in the last 25 years, but the motors that drive them have changed dramatically. The Sewquiet 6000SM is a new generation of clutch free motors, with more torque, yet perfectly silent when sitting idle.

Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.



SEWLINE SLS-2000 Sewing Machine Servo Motor Info and Demo.I recently installed a Sewline SLS-2000 Servo Motor with needle positioner on my Consew 226 and thought I'd post some info on this motor since I couldn't find much when I looked. I'm very happy with it and all its functions and power.


Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • Comes in 110v Standard US Voltage or 220V
  • 600W, 3/4 horsepower vs competition's 400W clutch motor or 400-550 conventional dc servo motors
  • More torque than conventional 400W clutch or underpowered servomotors
  • Up to 75% energy savings
  • Digital speed control limiter
  • Regular and reverse motor shaft turning directions
  • Fused overload protection (2)

    SewQuiet 6000SM Servomotor. From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice. 12-coil technology means more torque and variable speed control will suit all operator levels.


    *Attention Consew Owners!Just a word of caution regarding our synchronizer and the Consew model sewing machines. Our synchronizer comes with 2 size of mounting screws, 7mm & 8mm.
    The diameter of the shaft of the hand wheel of the Consew models have changed over the years so it is best to ask the Consew customers of the diameter of the shaft of their machine to make sure that either the 7MM or the 8mm screw will fit. Reliable Note on Consews: Please remove the screw on the hand wheel and measure the diameter of it.
    If the diameter is either 7 mm or 8 mm then our synchronizer will fit. If not, it won't fit.
    Unfortunately Consew over the years have changed the diameter of that particular screw size and we would not know which size you have.

    SYNCHRONIZER INSTALLATION INSTRUCTIONS

    Sew Quiet instruction booklet.

    The inside diameter of the sync. is 22mm.
    The ID of the hib is 15mm
    The bolts are 7 and 8 mm dia.

Reliable SewQuiet 6000SM Variable Speed Control DC Servo Motor Brushless, 550 Watts, 12 Coil Torque, 110 or 220V Single Phase, On Off & Reverse Switch

Reliable, Sew, Quiet, 6000SM, SQ5000, SQ4000, Brush, less, DC, Servo, motor, 600W, 3/4, Horse, power, Digital, Speed, Control, Regular, Directions, Over, load, Protection, 5000, No, Clutch, DC, 3/4HP, LED, Reverse, Switch, Fused, Aux, Power, Outlet, 60mm, Pulley

Reliable SewQuiet 6000SM Variable Speed DC Servo Motor 110V
Our Price: $219.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Please note: No, our synchronizer does not work on Adler, Pfaff or Consew machines because of the difference in shaft size and diameter compared to Reliable machines we make them for. .

Beauty and Brawn
The SewQuiet 6000SM brushless DC servomotor is a modern-day marvel of ingenuity and technology, crafted and designed to exceed your expectations. This is the only servomotor to incorporate a full 12-coil (vs. 6 or 9) design. This provides unparalleled power and torque, the kind of torque that’s needed to work with the toughest materials. And for those looking to add a synchronizer to your motor, it’s now available as a low cost stand-alone option.

Calibrated Control
The SewQuiet 6000SM represents the fourth generation of Reliable’s energy saving servomotor innovation. Precision step-by step stitching for detailed sewing, the ability to plug in a grounded light directly to the rear of the motor, UL/CSA certified electrical components and the total silence that gives the SewQuiet its name… the new 6000SM takes everything we’ve learned about motors over the past 60 years to new heights.

Main Features
• 550W power
• More torque than conventional clutch or servomotors
• Up to 75% energy savings
• Digital speed control
• Clockwise pully rotation (and counterclockwise directions for serger and blind stitch machines)
• Built-in overload protection
• Instruction manual with speed settings included

Includes one 60mm installed pulley

*This is a breakthrough in servomotor technology, the first 12-coil design, the torque is so strong you can't hold the pulley with your hand (more torque even then a clutch motor).

Reliable Newest Model 6000SM Motors are now shipping, 550 Watts, 3/4HP Motor Brushless, No Clutch, Dial RPM Speed Control, Reverse, 2 Overload Fuses, Auxillary Power Outlet

"Step Stitch will give you the stitch by stitch speed control you need. The servo motor variable speed is affected by the torque of the machine mechanics and materials being sewn more than just the torque of the motor. Some machines will have better variable speed control than others depending on the torque of the machine (how easy it is to turn the hand wheel over materials being used). The speed control dial is digital, and cannot be preset to exact stitches per minute, only RPM because of the differences in machines and materials." John Douthat, Owner and Tech

Other Features


You can set the speed on these motors from 100 rpm up to 3800 rpm in 100 rpm increments.

*Exclusive Electronic Controlled "Step Stitch" Function allows for one stitch at a time sewing by leather workers or anyone who needs stitch by stitch control for small items and turning corners.

More torque at 600W than conventional clutch or servomotors at 400-550W, replacement, for existing clutch motors with no speed control, or undependable dc motors, Up to 75% energy savings!

NO CLUTCH, NO BRUSHES, NO PROBLEM: The SewQuiet 6000SM brushless DC servomotor is designed to operate all light to heavy-duty industrial sewing machines.

The brushless DC servomotor design which has very good torque even at low speeds; uses a laser sensor instead of a traditional mechanical clutch. This design gives the operator a graded acceleration compared to the abrupt type of acceleration common with a clutch motor.

QUIET AND CONTROLLED: With the SewQuiet 6000SM, the noise that is normally associated with sewing motors (clutch and servo) is almost entirely eliminated, creating a more pleasant work environment.

Whether you are an advanced sewer or a beginner, the SewQuiet 6000SM's microprocessor controller gives the user an unparalleled connection to the sewing machine, allowing for speed or detailed work. A "stepping" speed can be achieved which allows for literally, a step by step control of the sewing speed. This makes sewing detailed work much easier.

From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice.

SIMPLE SET-UP
Everything you need to get your Sewquiet up and running is supplied in the box.


Reliable 6000SM Information Sheet (.PDF)


Reliable 6000SM Instruction Manual with Listing of Error Codes (.PDF)


"Installed Sew Quiet on Tacsew 226RB. Seems like unlimited power. I had to turn it down to about 25% to slow it down. It still had tons of torque" 600W vs 400W Clutch, No Belt.
-Seth, AllBrands Mechanic


Roots
Reliable has lived and breathed every aspect of sewing machines since Milton Kahn started the business more than 5 decades ago. Quality control, expert service and advice are just a few of the things that make Reliable the leading commercial sewing and garment care manufacturer in North America.

Sewing machines may not have changed much in the last 25 years, but the motors that drive them have changed dramatically. The Sewquiet 6000SM is a new generation of clutch free motors, with more torque, yet perfectly silent when sitting idle.
Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

  • The optional Synchronizer will not fit on the Consew 206RB machine.
  • Comes in 110v or 220v Standard US Voltage
  • 220V Can be special ordered.
  • 600W, 3/4 horsepower vs competition's 400W clutch motor or 400-550 conventional dc servo motors
  • More torque than conventional 400W clutch or underpowered servomotors
  • Up to 75% energy savings
  • Digital speed control limiter
  • Regular and reverse motor shaft turning directions
  • Fused overload protection (Electrical - 120V)
  • H.P. - 3/4
  • Power - 550-600W
  • Power Consumption - 4.5 amps
  • Speed Control - Digital
  • Pulley Type - Aluminum
  • Pulley Size - 60mm
  • On-Off Switch - Built-in
  • Accessories - Treadle rod mounting hardware, belt guard
  • Dimensions - 9.75" x 9" x 6"
  • Weight - Net - 7.8 lb - 3.5 kg
  • Shipping Dimensions - 13.2" x 11.4" x 8"
  • Shipping Weight - 10 lb - 4.5 kg
  • Manufacturer's Warranty - Limited 1 year

    SewQuiet 6000SM Servomotor. From the utmost in speed control technology and the ability to reduce costs with improved energy usage, to the 'oh, sew quiet' work environment, choosing the Reliable SewQuiet 6000SM is simply the smarter choice. 12-coil technology means more torque and variable speed control will suit all operator levels.


    Consew 206RB Owners!Just a word of caution regarding our optional synchronizer and the Consew model sewing machines. Our synchronizer comes with 2 size of mounting screws, 7mm & 8mm.
    The diameter of the shaft of the hand wheel of the Consew models have changed over the years so it is best to ask the Consew customers of the diameter of the shaft of their machine to make sure that either the 7MM or the 8mm screw will fit. Reliable

    Changing a Clutch Motor to a Servo Motor by Sewing Machines Australia. A variable speed servo motor delivers power savings, silent operation and precise control for your sewing machine. Often older machines with a clutch motor can receive a new lease of life by installing a servo motor. This video is a step by step guide to removing an existing clutch motor and then installing a new servo motor.


    Sew Quiet instruction booklet.

    Optional SYNCHRONIZER INSTALLATION INSTRUCTIONS

Juki 2 Spool Thread Stand for DX-4000QVP

Juki 2 Spool Thread Stand for DX-4000QVP

Juki DX-4000QVP 2 Spool Thread Stand
Our Price: $169.00
Prices are subject to change, and only current prices will be honored.

Shipping: Free Ground Shipping to the Contiguous USA
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

Original thread stand only for Juki DX-4000QVP. This Juki DX-4000QVP 2 Spool Thread Stand allows you to stage 2 spools of thread at a time. The Juki DX-4000QVP 2 Spool Thread Stand mounts to the back of the machine and has a telescopic stand on it.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

SKU: 65214
Part Number: 40245194

Juki Unassembled Sewing Machine Table, Stand, J7R Servo Motor, 110V or 220V, Reverse Motor Switch for Industrial Sewing Machines.

Juki Unassembled Sewing Machine Table, Stand, J7R Servo Motor, 110V or 220V, Reverse Motor Switch for Industrial Sewing Machines. * industrial, sewing, machine, table, sewing machine table, sewing machine stand, sewing table, power stand, Tacsew, Table, Power Stand, & 1/2HP Clutch Motor ,1725RPM, for Industrial, Sewing Machine, Heads - Specify Brand, & Model, 110V & 220V, Forward, & Reverse Switch

8321: Juki Unassembled Industrial Sewing Machine Table, Stand, 1/2HP Power Servo Motor, 110V or 220V, Reverse Motor Switch*
Our Price: $329.99
Prices are subject to change, and only current prices will be honored.

Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box

Features

These Clutch otor to clockwise or counterclockwise direction for hand wheel rotation. Clockwise is used for blindstitch and serger machines. Counter Clockwise is for All others including straight stitch, zigzag and upholstery)

  • Heavy duty adjustable legs
  • Durable formica tops for long service and lasting beauty
  • Color available: Tan
  • Cutout available for most industrial machines
  • Stand includes: motor, steel driver, treadle and base, treadle rod, treadle extension,
  • These stands do not include: drip pan, knee lifter, thread stand, light, bobbin winder, belt or hinges. These items should be included with the machine head.

    125 lbs
    Dimensions 48x48x30"
    Country of Origin Canada
    Ships from NJ
    Freight cost $195  
    $75 additional for "residential" delivery - i.e., you don't have a loading dock or fork lift

Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Please review our Freight LTL Shipping Policies
Ships Ground Freight only.

Consew KD Unassembled Table, Stand, Variable Speed DC Servo Motor for Industrial Sewing Machine Heads. Specify Brand and Model Number of Your Machine

industrial, sewing, machine, table, stand, power, Tacsew, Variable, Speed, DC, Servo, Motor, Consew Assembled Table, Stand, and Variable Speed DC Servo Motor for Industrial Sewing Machine Heads. Specify Brand and Model Number

86039: Consew KD Table, Stand, Variable Speed Servo Motor/Industrial Sewing Machines
Our Price: $299.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

  • Heavy duty adjustable K legs
  • Durable formica tops for long service and lasting beauty
  • Color available: Tan
  • Cutout available for most industrial machines
  • Stand includes: motor, treadle pedal and base, treadle rod, treadle extension, gooseneck light, on and off switch.
  • These stands do not include: drip pan, knee lifter, thread stand, bobbin winder, belt or hinges.
    These items are included with the machine head
  • Dimensions: 48” length x 20” width x 30” height when set up

    Consew Sewing Machine Table Assembly Demonstration
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.

Consew Space Saver Pedestal Like Table, Stand, Legs, Servo Motor 110V for Your Cylinder Bed Arm, Machine Head Not Included, No Premade Cut Outs on Top

Consew Space Saver Table, Stand Legs and Servo Motor for Off the Arm and Cylinder Arm Bed Industrial Sewing Machines Machines, industrial, sewing, machine, table, stand, power, Tacsew, Variable, Speed, DC, Servo, Motor, Consew Table, Stand, and Variable Speed DC Servo Motor for Industrial Sewing Machine Heads. Specify Brand and Model Number

101628: Consew Space Saver Table, Stand, Legs, Servo Motor 110V for Cylinder Bed Arm, Feed Off the Arm, and Shoe Patch Industrial Sewing Machines
Our Price: $649.99
Prices are subject to change, and only current prices will be honored.

Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box

Features

Please note that if you order the stand without a machine, the table top will come completely blank and the customer will be responsible for cutting the belt slot, motor holes, and other holes for the machine that they choose to put on it.

  • New style! Replaces the older model of space saver table
  • Heavy duty adjustable H legs
  • Durable formica tops for long service and lasting beauty
  • Table top comes blank
  • Stand includes: motor, treadle pedal and base, treadle rod, treadle extension, on and off switch.
  • These stands do not include: drip pan, knee lifter, thread stand, bobbin winder, belt or hinges. These items should be included with your machine head
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.

Specifications

Please review our Freight LTL Shipping Policies Ships Ground Freight only.* For delivery please select options. "Lift Gate" which means a goods lifting platform installed at the rear of the delivery truck that facilitates the unloading of cargo from truck bed to the ground. Most shipments will require a lift gate, if there is not a loading dock, or fork lift available for delivery.
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.