 |
November 21, 2024 |
Durkee EZ Frames and Hooping Stations
{Q} Durkee EZ Frames! I just purchased them about a week ago, when I put but 8x8 on and send over a 6 or 7" design and it WILL NOT let me stitch it. It tells me to make it smaller, if I do so, then the design will be SUPER SMALL and not look right on shirt! Please help!
{A}
On the rare occasion this issue comes up, the answer is the same. . Durkee EZ Frames have nothing to do with the issue. In fact, the customer should take them off and set them aside to fix the problem. The “A” arm of the machine has multiple positioning locations that, when properly aligned, cause the machine to “recognize” the hoop attached to the arm. In this instance the word “recognize” refers ONLY to the hoops that came with the machine or other OEM hoops from Brother available for that machine. Those positions on the “A” arm are small slots or grooves. In order for the machine to recognize the correct hoop, the left side (adjustable arm that moves left and right) must align perfectly in any given slot and the knob that holds it tightly secured. If these two criteria are not met, the machine “assumes” the next smallest size hoop.
Thus, if the customer will remove any/all hoops or frames from the machine and adjust the “A” arm correctly in the proper slot and tighten the thumbscrew/knob securely, the machine will “think” it has a 7 7/8” x 11 7/8” hoop attached and the problem will be solved. This hoop is usually and inaccurately referred to as a 12 x 8 hoop. Brother identifies this hoop as their “Large” hoop. Because the machine “thinks” it has a 12 x 8 hoop in place is why the customer must ALWAYS center their #1 needle in the middle of the EZ Frame or hoop and trace their design. Durkee
Durkee 360NS 5.5x6 Inch Flat Hat Hoop Front Cap Frame Back, Insert for Happy Embroidery Machines
 64083: Durkee 360NS 5.5x6" Hat Hoop Front Cap Frame Back for Happy Embroidery Machines |
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
This Durkee Cap Frame is available for the same price with free shipping for other multi needle machines: Tajima/Toyota, Happy, Melco/Bernina, SWF. Please call 800-739-7374 or 225-923-1285 to order for brands and models other than what is on this page. Thanks.Durkee EZ Frame Single Needle 5x7 Floating Frame
 Durkee EZ Frame Single Needle 5x7 Floating Frame |
Our Price: $79.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame SN Single Needle 8in x 12in Hoop Unit for Brother VM5200, VM6200, XE1, XJ1, XP1, XP2, and Babylock
 82413: Durkee EZ Frame SN Single Needle 8in x 12in Hoop |
Our Price: $89.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee Single Needle EZ Frames for Baby Lock & Brother Flat Bed MachinesSingle Needle EZ Frame Stitching with Durkee Embroidery
Durkee CFBR444SN, Brother Flat Cap Front, Hat Back Insert for SA444, BLEF26P 5x7 Hoop on NV10-12-1250,PE700,770,780,800,DZ820,NS1150,2750
 |
Our Price: $169.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee’s Newest Single Needle Cap Frame Insert - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into a Brother 5"x7" Accessory #SA444 hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery
placement.
Introducing Durkee’s Newest Single Needle Cap Frame Insert - all metal frames allowing embroiderers to embellish caps with
monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into a Brother 5"x7" Accessory #SA444 hoop. The bill
of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky
backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement.
Includes Top Blue Frame only, you must have the bottom portion of the SA444 5X7 Embroidery Frame from Brother to use this item
Compatible with Brother’s Embroidery Hoop 5" x 7" Accessory #SA444 for the following machines:
NV1000 - NV1200 - NV1250D - PC6500 - PC8200 - PC8500 - PC8500D - PE700 - PE700II - PE770 - PE780D - Designio DZ820E - SB7900Et
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
placement.
Introducing Durkee’s Newest Single Needle Cap Frame Insert - all metal frames allowing embroiderers to embellish caps with
monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into a Brother 5"x7" Accessory #SA444 hoop. The bill
of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky
backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement.
Includes Top Blue Frame only, you must have the bottom portion of the SA444 5X7 Embroidery Frame from Brother to use this item
Compatible with Brother’s Embroidery Hoop 5" x 7" Accessory #SA444 for the following machines:
NV1000 - NV1200 - NV1250D - PC6500 - PC8200 - PC8500 - PC8500D - PE700 - PE700II - PE770 - PE780D - Designio DZ820E - SB7900Et
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Compatible with Brother’s Embroidery Hoop5" x 7" Accessory #SA444 for the following machines:NV1000 - NV1200 - NV1250D - PC6500 - PC8200 - PC8500 - PC8500D - PE700 - PE700II - PE770 - PE780D - Designio DZ820E - SB7900E, SB8000
Compatible with Baby Lock’s Embroidery HoopBaby Lock sewing machine models BLR, BLR2, ESE, ESE2, BLMR, and ESL
The Durkee Single Needle Cap Frame Insert. Monogram the front and back of a hat using the Durkee Single Needle Cap Frame Insert. Click Arrow on Video below to play.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee CF-BRNEW5X7SN Brother SACFSN5X7 Flat Hat Cap Frame Insert fits Inside SA439 EF75 5x7in Hoops for Single Needle NV1500-XP2, Babylock Machines
|
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Fits Inside SA439 or Babylock EF75 5X7 Hoops for Brother XP2 XP1 XJ1 XE1 XV8500 VM6200 VM5100 VM5200 VE2200 VE2300 VQ3600 VQ3500, NV6000 6700 6750 5000 4750 4500 4000 2800 2500 1500
Includes Top Blue Frame only, you must have the bottom portion of the SA439 5X7 Embroidery Frame from Brother to use this item
We are delighted to introduce our first new single needle cap frame insert, Introducing Durkee Single Needle Cap Frame Inserts - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into either a Brother 5"x7" Accessory#SA439 hoop or, Baby Lock 5" x 7" Item# EF75 Hoop.
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Includes Top Blue Frame only, you must have the bottom portion of the SA439 5X7 Embroidery Frame from Brother to use this item
We are delighted to introduce our first new single needle cap frame insert, Introducing Durkee Single Needle Cap Frame Inserts - all metal frames allowing embroiderers to embellish caps with monograms, logos and designs. Durkee’s Single Needle Cap Frame inserts into either a Brother 5"x7" Accessory#SA439 hoop or, Baby Lock 5" x 7" Item# EF75 Hoop.
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in placewith sticky backing/stabilizer. Our Single Needle Cap Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2" wide and 4 1/2" tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement
Please note: This insert is specifically designed with two - and only two - manufacturer's 5" x 7" hoops that come with the machines designated
Compatible with Brother’s Embroidery Hoop
5" x 7" Accessory #SA439 for the following machines:
Innov-is NV2500D, Innov-is NV1500D, Duetta® NV4500D, Quattro® NV6000D, Innov-is 2800D, Quattro® NV6700D, Isodore® Innov-is NV5000, Duetta®2 NV4750D, DreamWeaver™ XE VM6200D, DreamMaker™ XE VE2200, Quattro® 3
Triliogy Limited Edition Innov-is 6750D, BP2100, DreamCreator™XE VM5100, The Dream Machine XV8500D,
Compatible with Baby Lock’s Embroidery Hoop
5" x 7" Item# EF75 for the following machines:
Destiny, Ellisimo BLSO, Ellisimo Gold BLSOG, Ellisimo GoldII BLSOG,Unity BLTY, Journey BLJY, Ellegante 3 BLG3, Ellegante BLG 2, Ellegante BLG, Ellageo BLL2, Ellageo BLL. Esante BLN, Spirit BLPY, Aventura BLMAV, Flourish BLMFO
The Durkee Single Needle Cap Frame Insert. Monogram the front and back of a hat using the Durkee Single Needle Cap Frame Insert. Click Arrow on Video below to play.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee CF-PR-MN 5.5x6" Hat Front, Cap Back Frame Brother SACFPRMN & Babylock 6-10 Needle Machines: PR600, PR620, PR650, PR655, PR655X, PR1000, PR1050X
|
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This Durkee Cap Frame is available for the same price with free shipping in USA 48 states for other multi needle machines: Janome MB4, Tajima/Toyota, Happy, Melco/Bernina, and SWFJust Specify Your Brand, Model Number and Name in our Drop Down Menu above. Example: Brother PR1000 Entrepreneur. Thanks. John
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Durkee Cap Frame
posted by Rosemary Gulledge Blog on december 7, 2015
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Durkee Cap Frame
posted by Rosemary Gulledge Blog on december 7, 2015
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee CF-PR-MN 5.5x6 Flat Cap Frame Front, Hat Back Hoop, Insert for Brother SACFPRS for Persona PRS100, Babylock Alliance BNAL Embroidery Machines
|
Our Price: $195.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
- Easy to use - attaches to your machine like a normal hoop
- Extra-large sewing field - much larger than many cap just like any other hoop embroidery systems and at a fraction of the price
- Durable but lightweight - all metal construction
- Can hoop the back of a cap, as well as, the front with anodized aluminum plate and stainless steel arms
- Vertical slots in the front and back of the frame
- Comes with Durkee’s lifetime replacement warranty plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
This Durkee Cap Frame is available for the same price with free shipping for other multi needle machines: Janome MB4, Tajima/Toyota, Happy, Melco/Bernina, SWF. Please call 800-739-7374 or 225-923-1285 to order for brands and models other than Brother PR and Babylock on this page. Thanks.Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee CF-SNEZ5x7 Combination Single Needle 5x7" Cap Frame and EZ Frame Hoop for Brother NQ, NV, VE, VM, XE, XJ, XP, Babylock Embroidery Machines
 102422: Durkee CF-SNEZ5x7 Combination Single Needle 5x7" Cap Frame and EZ Frame Hoop for Brother NQ NV VE VM XE XJ XP, Babylock |
Our Price: $225.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Two Frames in ONE!
Combination Cap Frame/Single Needle 5 X 7 EZ Frame
Works on ALL Brother and Baby Lock machines with slide in adaptors including the Brother NQ 1600E/NQ 3600, and Baby Lock Aventura ll/Flourish ll (Brother SA439 & Baby Lock EF75 style hoops).
Combination Cap Frame/Single Needle 5 X 7 EZ Frame
Works on ALL Brother and Baby Lock machines with slide in adaptors including the Brother NQ 1600E/NQ 3600, and Baby Lock Aventura ll/Flourish ll (Brother SA439 & Baby Lock EF75 style hoops).
Non-US Warranty: 30 days parts and labor.
Specifications
EZ Frames for Single Needle Machines
Cap Frame for Single Needle Machines
Embroidering Caps on Brother Luminaire Machine
Embroidering Caps on Baby Lock Machine
Durkee CF-EZ Cap Frame 5" x 4" Stitching Area Multi-Needle Machines
 Durkee CF-EZ Cap Frame 5" x 4" Stitching Area Multi-Needle Machines |
Our Price: $150.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Durkee family of EZ Frame products proudly welcomes our newest companion product - the Durkee EZ Cap Frame. The EZ Cap Frame attaches directly to any Durkee Blue Adaptor Arm for any Multi Needle machine. Whether you want to embroider the front of the cap (with a generous 5" x 4" stitching area for most caps) or, the back of the cap, it’s easy with the EZ Cap Frame. And because you are stitching flat (like a left chest embroidery design), no special digitizing is required! Plus, with your additional EZ Frames you can also stitch on the side(s) of the cap. Click on this link for a video demonstration:
Non-US Warranty: 30 days parts and labor.
Specifications
Note: A Durkee Blue Adaptor Arm is required to use the EZ Cap FrameDurkee CF4x4" Cap Hat Frame Hoop for Brother HE1 HE240 LB5000 LB6 NS1750 NV9 PE5 SE3 SE400/25 SE600 SE625 BL Intrigue Sophia Verve Embroidery Machines
 99668: Durkee CF - 4x4 BR/BL 4x4" Cap Hat Frame Hoop for BabyLock Brother HE LB NS NV PE SE Embroidery Machines |
Our Price: $99.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
With Durkee’s new 4 x 4 Cap Frame simply load your design or logo into your machine, rotate90 degrees and stitch! Like all Durkee cap frames, simply apply self-adhesive (sticky) backing to the underside of the cap frame, secure the bill of the cap with the bill clamp, press the cap onto the backing, trace your design and stitch.
The 4 x 4 Cap Frame can also be used to stitch other projects such as baby bibs, tea towels, handkerchiefs, bandanas, and more!
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
The 4 x 4 Cap Frame can also be used to stitch other projects such as baby bibs, tea towels, handkerchiefs, bandanas, and more!
Durkee 4x4 cap frame revised 11202020 from Brent Taylor on Vimeo.
See Brent from Durkee talk about this product at the Houston Virtual Quilt Festival below:
Non-US Warranty: 30 days parts and labor.
Specifications
Compatible with the following Brother Embroidery machines: HE1, HE240, LB5000M,LB5000S, LB6700PRW, LB6770, LB6800PRW, LB6800THRD, LB7000, LB7000BNDL, NS1750D, NV900D, NV950D, NV990D, PE500, PE525, PE535, PE540D, PE550D, SE350, SE400, SE425, SE600, SE625.
Compatible with the following Baby Lock Embroidery machines:
Intrigue/INT, Sophia/BL137A, Sophia 2/BL137A2, Verve/BLMVR.
Durkee EZ Frames Ultimate Package 17pc Hoops Set for Brother and Baby Lock 6 & 10 Needle Embroidery Machines Valued at over $1000
 Durkee EZ Frame Ultimate Package 17 Hoop Set for Brother and Baby Lock 6 & 10 Needle Machines |
Our Price: $795.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Includes:
- Blue adaptor arm
- 1.5" x 4"
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 3" x 8"
- 4" x 4"
- 5" x 4"
- 5" x 5"
- 5" x 8"
- 6" x 6"
- 7" x 5"
- 7 x 7"
- 8" x 8"
- 9" x 9"
- 12" x 4"
- 12" x 8"
- Radius Frame
Why Buy Durkee Frames?
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance.
Savings
A lower purchase price means up-front savings and higher operating speeds means more production in less time!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee Embroidery was founded with the concept of providing lower cost, higher quality products for the embroidery industry. We utilized our extensive manufacturing experience to create the most widely distributed tubular hoop line in the world today.The Durkee Hoop Guarantee
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects within the contiguous 48 United States. We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices. We also offer a total satisfaction guarantee. We will refund or exchange any product within 30 days of purchase for any reason.
Durkee HP Hooping Pro Station: Combo Professional Package: Full Station Board, Stabilizing Legs, Junior Station Board, Stabilizing Leg
 Durkee HP Hooping Pro Station: Combo Professional Package: Full Station Board, Stabilizing Legs, Junior Station Board, Stabilizing Leg |
Our Price: $825.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Package Includes: One (1) Hooping Pro Full Station, One (1) Hooping Pro Project Station w/One (1) set of Stabilizing Legs, and One (1) Hooping Pro "junior" Board w/ One (1) Additional Set of Stabilizing Legs
Non-US Warranty: 30 days parts and labor.
Durkee A.S.K. Embroidery Hoop Starter Kit, 11in1 Tubular Frames for Brother Persona PRS100, Babylock Alliance BNAL
 |
Our Price: $664.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” A.S.K for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee’s Starter Kits feature Durkee Hoops & Frames M.S.K. for Brother and Baby Lock 6 & 10 needle machines AND their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Durkee’s Starter Kits feature Durkee Hoops & Frames M.S.K. for Brother and Baby Lock 6 & 10 needle machines AND their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
The Kit contains:One (1) - 24cm x 24cm (9" x 9")
One (1) - 12.5cm x 24cm (5" x 9")
One (1) - 15cm x 15cm (6" x 6")
Seven (7) piece combo pack also includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 5.5x6" Flat Cap Frame Front, Hat Back Embroidery Hoop, Insert for Janome MB-4, MB-7, MB4S, Melco EP4
82415: Durkee 5.5x6" Cap Frame Front, Hat Back Hoop for Janome MB4 MB7 |
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
- Easy to use - attaches to your machine like a normal hoop
- Extra-large sewing field - much larger than many cap just like any other hoop embroidery systems and at a fraction of the price
- Durable but lightweight - all metal construction
- Can hoop the back of a cap, as well as, the front with anodized aluminum plate and stainless steel arms
- Vertical slots in the front and back of the frame
- Comes with Durkee’s lifetime replacement warranty plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee M.S.K Embroidery Hoop Deluxe Multi Needle Starter Kit, 11in1 Frames for Brother PR6 PR1000, Baby Lock 6 & 10 Needle Machines
 |
Our Price: $664.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” M.S.K. Hoops for Brother PR6 and PR1000, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee’s Starter Kits feature Durkee Hoops & Frames for Brother and Baby Lock 6 & 10 needle machines as well as their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their 3/16" thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Durkee’s Starter Kits feature Durkee Hoops & Frames for Brother and Baby Lock 6 & 10 needle machines as well as their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their 3/16" thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
The Kit contains:One (1) - 24cm x 24cm (9" x 9")
One (1) - 12.5cm x 24cm (5" x 9")
One (1) - 15cm x 15cm (6" x 6")
Seven (7) piece combo pack also includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 1.5"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 12x4" Optional Hoop for use with 7in1 Tubular EZ Frames, Heavy Duty 3/16" Aluminum for Brother Babyloci PR6 to PR10 Needle Embroidery Machines*
 Durkee 12x4" Hoop for 7in1 Tubular EZ Frames Set on Brother PR6-PR1000 |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Made of Heavy Duty Aluminum. Connects to the Durkee EZ Frame set, not a stand alone product.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee 2.5"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 2"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 3"x8"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 3"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 5"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 7"x5"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 8"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multi needle EZ Frames
 85237: Durkee 8"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multi needle EZ Frames |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee EZ Frame 9" x 9" Anodized Hoop for Brother Multi Needle Machines PR6 and PR10
 Durkee EZ Frame 9" x 9" Hoop for Multi Needle Machines |
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
One of our most popular “traditional” size plastic hoops is our 9" x 9" hoop. We are proud to introduce the companion size EZ Frame for Multi-Needle machines.
The new 9" x 9" (Sewing Field) Durkee EZ Frame is now available. This size is great for a number of larger projects and designs including Tee Shirts, Tote Bags, Throw Pillows, Monograms, and more!
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Savings - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
The new 9" x 9" (Sewing Field) Durkee EZ Frame is now available. This size is great for a number of larger projects and designs including Tee Shirts, Tote Bags, Throw Pillows, Monograms, and more!
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Savings - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee Magnetic EZ Frame Arm Unit Magnetic 4x4 EZ Frame for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame Arm Unit Magnetic 4x4 EZ Frame |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroiderer. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee Magnetic EZ Frame Arm Unit Magnetic 7x5 EZ Frame for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame Arm Unit Magnetic 7x5 EZ Frame for Home and Commercial Embroidery |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroiderer. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 EZ Frames for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 EZ Frames for Home and Commercial Embroidery |
Our Price: $519.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroiderer. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 with Arm EZ Frames for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 with Arm EZ Frames for Home and Commercial Embroidery |
Our Price: $623.00 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroider
er. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
er. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee EZ Frame 4pc Set PLUS 2x4, 5x4, 7x5, 8x8 with Arm EZ Frames and EZ Cap Frame for Home and Commercial Embroidery
 Durkee EZ Frame 4pc Set PLUS 2x4, 5x4, 7x5, 8x8 with Arm EZ Frames and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $399.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
No hoop pop off...no hoop burn with EZ Frames. Just apply self-adhesive backing to the underside of the frame and "float" your material on top. Each EZ Frame has alignment guides one ach side for easy centering. Start with the Kick-Start Combo and add additional frames as you need them! Includes 2"x4", 5"x4" ,7"x5", 8"x8" EZ Frames & EZ Cap Frame.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee EZ Frame 7pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Embroidery
 Durkee EZ Frame 7pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $519.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Seven (7) piece EZ Frame Combo Package Includes the Following EZ Frames Sizes: 2"x4", 2 1/2"x4", 3"x4", 5"x4", 7"x5", 8"x8", Radius Frame, & EZ Cap Frame.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame 8pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Embroidery
 Durkee EZ Frame 8pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $549.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Eight (8) piece EZ Frame Combo Package Includes the Following EZ Frame Sizes: 2"x4", 2 1/2"x4", 3"x4", 5"x4", 7"x5", 8"x8", 12"x8",Radius Frame & EZ Cap Frame.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame 12pc Set PLUS 1 1/2x4, 2x4, 2 1/2x4, 3x4, 3x8, 5x4, 5x8, 7x5, 8x8, 12x4, 12x8 with Arm EZ Frames, Radius Frame and EZ C for Embroidery
 Durkee EZ Frame 12pc Set PLUS 1 1/2x4, 2x4, 2 1/2x4, 3x4, 3x8, 5x4, 5x8, 7x5, 8x8, 12x4, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $768.75 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Twelve (12) piece EZ Frame Master Pack Includes the Following EZ Frame Sizes: 1 1/2"x4", 2"x4", 2 1/2"x4", 3"x4", 3"x8", 5"x4", 5"x8", 7"x5", 8"x8", 12"x4", 12"x8", Radius Frame & EZ Cap Frame.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame 17pc Set Includes 15 Sizes EZ Frame, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery
 Durkee, EZ Frame, 12pc, Set, PLUS, 1 1/2x4, 2x4, 2 1/2x4, 3x4, 3x8, 4x4, 5x4, 5x5, 5x8, 6x6, 7x5, 7x7, 8x8, 9x9, 12x4, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $1,043.50 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Seventeen (17) piece EZ Frame Ultimate Pack Includes the Following EZ Frame Sizes: 1 1/2"x4", 2"x4", 2 1/2"x4", 3"x4", 3"x8",4" x 4", 5"x4", 5" x 5", 5"x8", 6" x 6", 7"x5", 7" x 7", 8"x8", 9" x 9", 12"x4", 12"x8", Radius Frame, & EZ Cap Frame
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame Radius Anodized Part -for Existing Multi-Needle EZ Frames
 Durkee EZ Frame Radius Anodized Part |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Made of Heavy Duty Aluminum. Connects to the Durkee EZ Frame set, not a stand alone product.
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame Single Needle 6.5x10.25 Floating Frame
 Durkee EZ Frame Single Needle 6.5x10.25 Floating Frame |
Our Price: $79.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame Single Needle 6x6 Floating Frame
 Durkee EZ Frame Single Needle 6x6 Floating Frame |
Our Price: $79.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame Single Needle 7x12 Floating Frame Hoop For Brother Dream XV8500, Dream II XV8550 or Baby Lock Destiny, Destiny II Embroidery Machines
 Durkee EZ Frame Single Needle 7x12 Floating Frame For Brother Dream XV8500, Dream II XV8550 or Baby Lock Destiny, Destiny II Embroidery Machines |
Our Price: $79.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame SN8x8 Hoop for Single Needle Machines for Brother XV, Babylock Destiny*
 |
Our Price: $89.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.
Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.
When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.
Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.
When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.
Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.
When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.
Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.
When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.
Non-US Warranty: 30 days parts and labor.
Specifications
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops
Durkee In-the-Hoop Pot Holder Single Needle Baby Lock from Brent Taylor on Vimeo.
Durkee EZ Frame Single Needle 9.5x14 Floating Frame for All Brother and Babylock Embroidery Machines including 9.5x14 hoop recognition XV, XE, XJ, XP
 82414: Durkee EZ Frame Single Needle 9.5x14 Floating Frame for All Brother and Babylock Embroidery Machines including 9.5x14 hoop recognition XV, XE, XJ, XP |
Our Price: $99.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
For Brother Dream, Dream II or Baby Lock Destiny, Destiny II Machines. Also newer models Stellaire and Luminaire.
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Brother/Baby Lock Single Needle Power Pack One: As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. Just imagine not having to hoop your projects with traditional plastic hoops. And what if you could do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible. The set includes one (1) cap frame insert, four (4) single needle EZ Frames designed for your machine plus, a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
Non-US Warranty: 30 days parts and labor.
Durkee DUREZF4X4 EZ Frame Individual Single Needle 4x4 Floating Frame for Brother and Babylock
 82408: Durkee DUREZF4X4 EZ Frame Individual Single Needle 4x4 Floating Frame |
Our Price: $79.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
If you've been looking for an alternative to traditional hooping with your Single Needle embroidery machine, then you need the Durkee’s new Single Needle EZ Frames! These frames are currently available for several models of Brother and Baby Lock single needle embroidery machines only. (Not for use with Brother Persona PRS100 or Baby Lock Alliance.)
Apply sticky backing to the underside of the EZ Frame. Then attach the fabric on the top of the EZ frame and backing. Attach EZ frame to your machine and then trace your design with your machine making sure the embroidery foot does not hit the frame and you are ready to embroider your design.
Please Note: Make sure that the EZ frame you are purchasing is equal to or smaller than the largest frame available for your machine. EZ frames do not make your embroidery machine sew an embroidery design any larger than the largest hoop available for your machine.
Apply sticky backing to the underside of the EZ Frame. Then attach the fabric on the top of the EZ frame and backing. Attach EZ frame to your machine and then trace your design with your machine making sure the embroidery foot does not hit the frame and you are ready to embroider your design.
Please Note: Make sure that the EZ frame you are purchasing is equal to or smaller than the largest frame available for your machine. EZ frames do not make your embroidery machine sew an embroidery design any larger than the largest hoop available for your machine.
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame 19 5/8" Wide Hoop Holding Arms Only for Brother and Baby Lock 6 & 10 Needle Machines PR655, PR1000, PR1050
 79904: Durkee EZ Frame 19 5/8" Wide Arms Only for Brother/Baby Lock 6 & 10 Needle Machines |
Our Price: $119.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee EZ Frame 19 5/8" Wide Arm Only for Brother/Baby Lock 6 & 10 Needle Machines.
The Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is the adaptor arm needed to use the Durkee EZ Frames with your machine. Simple and effective system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project tot he underside of the frame. Durkee EZ Frames for Multi Needle Commercial Embroidery Machines have a lifetime replacement warranty against manufacturers defects. This Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is what you need to purchase if you are not wanting the complete EZ Frame System. You can then simply add the individual frame you desire.
The Durkee EZ Frame Wide Arms 19 5/8" for Brother/Baby Lock 6 & 10 Needle Machines is compatible with:
Brother PR600
Brother PR600II
Brother PR620
Brother PR650
Baby Lock EMP6
Baby Lock BMP8
Brother PR1000
Baby Lock 10 Needle
The Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is the adaptor arm needed to use the Durkee EZ Frames with your machine. Simple and effective system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project tot he underside of the frame. Durkee EZ Frames for Multi Needle Commercial Embroidery Machines have a lifetime replacement warranty against manufacturers defects. This Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is what you need to purchase if you are not wanting the complete EZ Frame System. You can then simply add the individual frame you desire.
The Durkee EZ Frame Wide Arms 19 5/8" for Brother/Baby Lock 6 & 10 Needle Machines is compatible with:
Brother PR600
Brother PR600II
Brother PR620
Brother PR650
Baby Lock EMP6
Baby Lock BMP8
Brother PR1000
Baby Lock 10 Needle
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee Hoops EZ Framer MAX Hooping Station For All Hoops and Frames Up To 16.5" with Cross Hair Laser Light for Embroidery Positioning
 94150: Durkee Hoops EZ Framer MAX For All Hoops and Frames Up To 16.5" |
Our Price: $495.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
A well-known Executive in the embroidery industry once said, “There are only two major challenges in embroidery. The first is hooping.”
Then came the reply, “What is the second?”
“If you solve the first there is no second,” he said.
Introducing the
EZ Framer MAX
Then came the reply, “What is the second?”
“If you solve the first there is no second,” he said.
EZ Framer MAX
- Easy to understand - easy to use hooping device for the home or commercial embroiderer
- Eliminates table hooping/framing
- Cross-hair laser light makes centering designs quick and easy
- Lightweight - is portable or can be mounted permanently
- Use any hoop/frame from any manufacturer up to 16 1/2" O.D.
See for yourself just how simple hooping and alignment can be going from start to finish with the
EZ Framer MAX:
EZ Framer Max from Brent Taylor on Vimeo.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee Embroidery was founded with the concept of providing lower cost, higher quality products for the embroidery industry. We utilized our extensive manufacturing experience to create the most widely distributed tubular hoop line in the world today.DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects within the contiguous 48 United States. We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices. We also offer a total satisfaction guarantee. We will refund or exchange any product within 30 days of purchase for any reason.
UNBREAKABLE TUBULAR EMBROIDERY HOOPS
Get the durability you expect and need from a plastic embroidery hoop without the expense. Durkee Embroidery has embroidery hoops available for Tajima, Barudan, Brother, Happy, Melco, SWF, Toyota, and ZSK embroidery machines. Try our embroidery hoops and you will never overpay for hoops again
Durkee EZ Framer PLUS 2-C Clamps to Hoop Station Tubular Items: Back of Caps, Onesies, Tote Bags, Shirt Sleeves, Shirt Cuffs, and More!
 84460: Durkee EZ Framer PLUS 2-C Clamps to Hoop Station Tubular Items |
Our Price: $295.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee is proud to introduce our new EZ Framer PLUS. The EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well.
Weighing less than 7 pounds, it is lightweight and totally portable.
The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface.
Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4".
Weighing less than 7 pounds, it is lightweight and totally portable.
The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface.
Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4".
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee is proud to introduce our new EZ Framer PLUS. The Durkee EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well. Weighing less than 7 pounds, it is lightweight and totally portable. The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface. Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The Durkee EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4". Please watch the attached two (2) videos introducing and demonstrating the Durkee EZ Framer PLUS and see for yourself how easy it can be to hoop the back of caps, onesies, tote bags, shirt sleeves, shirt cuffs, and more!EZ Framer Plus Demonstration from Brent Taylor on Vimeo.
Introduction to Durkee EZ Framer Plus from Brent Taylor on Vimeo.
Durkee EZ Framer PLUS with Laser Light Clamps to Hoop the Back of Caps, Onesies, Tote Bags, Shirt Sleeves, Shirt Cuffs, and More!
|
Our Price: $395.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee is proud to introduce our new EZ Framer PLUS. The EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well.
Weighing less than 7 pounds, it is lightweight and totally portable.
The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface.
Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4".
Weighing less than 7 pounds, it is lightweight and totally portable.
The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface.
Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4".
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee is proud to introduce our new EZ Framer PLUS. The Durkee EZ Framer PLUS simplifies the hooping/framing process for both the novice and veteran embroiderer as well. Weighing less than 7 pounds, it is lightweight and totally portable. The unit comes with two (2) “C” clamps for quick setup or, it can be mounted permanently to a work surface. Industry experts estimate over 95% of all embroidered items require a hoop or frame 15cm in size or smaller. The Durkee EZ Framer PLUS will accommodate hoops and frames from the smallest sizes up to 21cm round hoops - 7 1/4" magnetic Mighty Hoops, and Durkee EZ Frames up to 7 1/4". Please watch the attached two (2) videos introducing and demonstrating the Durkee EZ Framer PLUS and see for yourself how easy it can be to hoop the back of caps, onesies, tote bags, shirt sleeves, shirt cuffs, and more!EZ Framer Plus Demonstration from Brent Taylor on Vimeo.
Introduction to Durkee EZ Framer Plus from Brent Taylor on Vimeo.
Durkee Frames 4in1 Single Needle Package4: 8x12 5x7 6x6 4x4 Hoops Brother XV85 BL Destiny, XP1 XP2 Luminaire Solaris XJ1 XE1 VM5200 VE2300*
 Durkee SAC4PCSNXV EZ Frames 4in1 Single Needle Package k#4: 8x12", 5x7", 6x6", 4x4" Hoops XV XP1 XJ1 XE1 BL |
Our Price: $295.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 8x12"
- 5x7"
- 6x6"
- 4x4"
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
{Q} Why won't my machine recognize the correct size of hoop I Have installed on the machine?
{A} On the rare occasion this issue comes up, the answer is the same. . Durkee EZ Frames have nothing to do with the issue. In fact, the customer should take them off and set them aside to fix the problem. The “A” arm of the machine has multiple positioning locations that, when properly aligned, cause the machine to “recognize” the hoop attached to the arm. In this instance the word “recognize” refers ONLY to the hoops that came with the machine or other OEM hoops from Brother available for that machine. Those positions on the “A” arm are small slots or grooves. In order for the machine to recognize the correct hoop, the left side (adjustable arm that moves left and right) must align perfectly in any given slot and the knob that holds it tightly secured. If these two criteria are not met, the machine “assumes” the next smallest size hoop.
Thus, if the customer will remove any/all hoops or frames from the machine and adjust the “A” arm correctly in the proper slot and tighten the thumbscrew/knob securely, the machine will “think” it has a 7 7/8” x 11 7/8” hoop attached and the problem will be solved. This hoop is usually and inaccurately referred to as a 12 x 8 hoop. Brother identifies this hoop as their “Large” hoop. Because the machine “thinks” it has a 12 x 8 hoop in place is why the customer must ALWAYS center their #1 needle in the middle of the EZ Frame or hoop and trace their design.
Durkee SAC4PCSNXV EZ Frames 4in1 Single Needle Package #5: 9.5 X 14, 8 X 8, 5 X 7, 4 X 4 Frames
 90943: Durkee EZ Frames 4in1 Single Needle Package #5: 9.5 X 14, 8 X 8, 5 X 7, 4 X 4 Frames |
Our Price: $295.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 9.5x14
- 5x7
- 8x8
- 4x4
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee SAC4PCSNXP 4pc Package #6 Single Needle EZ Frames 4in1: 10-5/8x16, 9.5x9.5, 5x7, 4x4 Frames Combo for XP1 XP2 Luminaire and Babylock Solaris
 90944: Durkee Package #6 Single Needle EZ Frames 4in1: 10-5/8x16, 9.5x9.5, 5x7, 4x4 Frames for XP1 Luminaire and Babylock Solaris |
Our Price: $333.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 7x12
- 5x7
- 6x6
- 4x4
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frames 4in1 Package #1 for Single Needle Machines 9.5x14 8x12 5x7 4x4 Hoops for XV85 Dream, XP1 XP2 Luminaire, Babylock Destiny, Solaris
 82200: Durkee EZ Frames 4in1 Single Needle Package 1: 9.5x14 8x12 5x7 4x4 Hoops XP1 XV BL |
Our Price: $295.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 9.5x14
- 8x12
- 5x7
- 4x4
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee EZ Frames 4in1 Single Needle Package 2: 7x12" 6x6" 5x7" 4x4" Hoops for Brother VE2200 VM5100 VM6200D, Quattro, NV5000 NV4750 NV4500, NV4000, BL
 |
Our Price: $295.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 7x12
- 5x7
- 6x6
- 4x4
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee EZ Frames 4in1 Single Needle Package #3: 6.25x10x25" 6x6" 5x7" 4x4" Hoops for Brother NQ1400E, NQ3500D, NV2800, NV2500, NV1500, Babylock 6x10"
 |
Our Price: $295.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 6.5x10.25
- 5x7
- 6x6
- 4x4
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee EZ-4 PC PR 6 & 10 Needle Kickstart 4in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PR6 PR1000 PR1050 PR1055 2x4 5x4 7x5 8x8 for A Arms
 |
Our Price: $249.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
No hoop pop-off * No hoop burn * Less stress on fingers and hands * User friendly
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000.. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000.. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee Kickstart 4in1 EZ-4 Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock Alliance BNAL
 91740: Durkee Kickstart 4in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock |
Our Price: $249.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
No hoop pop-off * No hoop burn * Less stress on fingers and hands * User friendly
Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000, but applicable to the PRS100 Persona. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000, but applicable to the PRS100 Persona. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Four (4) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 4"x12" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 4"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x4" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x4" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 5"x5" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 66707: Durkee 5"x5" EZ Tubular Hoop 3/16" Aluminum Frame for Existing Multi-Needle EZ Frames |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x5" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x5" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 5"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x8" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x8" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 6"x6" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 6"x6" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 6"x6" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee SAEZ7PRS 7in1 EZ Frames for Brother PRS100 & Babylock, Heavy Duty 3/16" Thick Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8+Cap Back/Radius
 65755: Durkee SAEZ7PRS 7in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock Alliance |
Our Price: $395.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee 7in1 EZ Frames are demonstrated on Brother PR6-1000, but applicable to the PRS100 Persona
Note: The primary uses for the radius frame are: back of hats, deep pockets on backpacks, and to embroider the belly area of embroiderable stuffed animals. But the complete answer is – any item it fits. Also, on the subject of hats, the 2” x4”, 2 ½” x 4”, and 3” x 4” frames are frequently used to embroider the “sides” of hats. Durkee
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee 7in1 EZ Frames are demonstrated on Brother PR6-1000, but applicable to the PRS100 Persona
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Note: The primary uses for the radius frame are: back of hats, deep pockets on backpacks, and to embroider the belly area of embroiderable stuffed animals. But the complete answer is – any item it fits. Also, on the subject of hats, the 2” x4”, 2 ½” x 4”, and 3” x 4” frames are frequently used to embroider the “sides” of hats. Durkee
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 7in1 EZ Frames Melco Bravo Bernina E16, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back/Radius (like Fast Frames)*
 |
Our Price: $399.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 7in1 EZ Tubular Hoops 3/16" HD Aluminum Frames for Janome MB4, 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back/Radius Frame
|
Our Price: $325.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” f EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
The video is used to demonstrate Durkee 7in1
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
The video is used to demonstrate Durkee 7in1
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 7"x7" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 7"x7" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 7"x7" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 8in1 EZ Frames +Arm for Brother PR1X-1055X & BL, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8 8x12"+Cap Back/Radius Frame
66290: Durkee 8in1 EZ Frames Tubular Hoops 3/16" Aluminum, Brother PR6's PR1000's |
Our Price: $369.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.
Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
ABOUT THE PRODUCTDurkee‡ frames offer you a simple, yet effective way to hoop your more difficult-to-hoop items. Hold your fabric in place with our adhesive stabilizer and start stitching. This 8-piece set comes with the Main Attachment Arm, (1) 2” x 4”, (1) 2.5” x 4”, (1) 3” x 4”, (1) 5” x 4”, (1) 7” x 5”, and (1) 8” x 8” hoops, and Cap Back/Radius frame. Comes with Durkee’s limited lifetime replacement warranty. Adhesive stabilizer, SA5820 or SA5815 is required. Additional purchase required.
Eight (8) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- 12" x 8"
- Cap Back/Radius Frame
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee SAEZLG16XP EZ Frame EZSN10x16 Hoop for Brother Single Needle XP1 XP2 Luminiaire Babylock Solaris 10.5x16" Largest Hoop
 90863: Durkee EZ Frame EZSN10x16 for Brother XP1 Luminiaire Babylock Solaris 10.5x16" |
Our Price: $119.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee H-15x15-360 5.7" (150mm/15cm) Square Tubular Embroidery Hoop Frame for Happy Embroidery Machines
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Durkee H-24x24-360 9.4" (240mm/15cm) Square Tubular Embroidery Hoop Frame for Happy Embroidery Machines
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Durkee HP1 Hooping Pro Full Station Uses almost any size or style hoop: tubular, magnetic, wooden, single needle...no additional attachments required
 |
Our Price: $595.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Ten Reasons To Own The Durkee Hooping Pro
No Additional Purchases*for Tubular Hoops, Magnetic Hoops, Wooden Hoops, and Single Needle Hoops, No Additional Attachments or Fixtures Required.
Please note the project stations are sold separately.
Use almost any size hoop from any manufacturer including traditional tubular hoops, wooden hoops, or magnetic hoops. There are NO ADDITIONAL purchases to be made for parts, pieces, or fixtures to accommodate different size hoops.
Two Stations
Two Hooping Pro stations available – A “Full Station” for polo shirts, t-shirts, jackets, etc. and an optional narrower “Project Station” for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.
Cross-Hair Laser Light
The “Full Station” comes with a fully adjustable cross-hair laser light with articulating arm to assist in centering and aligning.
Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.
Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.
Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.
Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.
Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.
Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Non-US Warranty: 30 days parts and labor.
Specifications
PLEASE NOTE: THE VIDEO IS FOR EDUCATIONAL PURPOSES. THIS DOES NOT MEAN WHAT YOU SEE IN THE VIDEO IS INCLUDED WITH THE PURCHASE OF THIS ITEM.Click here to watch the Durkee Hooping Pro – Introduction
Durkee Hooping Pro-Left Chest and Jacket Back
Durkee Hooping Pro – Freedom Ring Demo:
Optional Durkee Project Station Demo:
Optional Durkee Project Stations Plus Boards:
Durkee Hooping Station HP1/HP2PKGPackage Includes one (1) each Hooping Pro 1 (Full Station) and Hooping Pro 2 (Project Station)
 Durkee Hooping Station HP1/HP2PKG Package |
Our Price: $695.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Hooping Station HP1/HP2PKGPackage Includes one (1) each Hooping Pro 1 (Full Station) and Hooping Pro 2 (Project Station)
Non-US Warranty: 30 days parts and labor.
Durkee HP2 Hooping Pro Project Station: for Embroidery Design Placement on Sleeves, Legs, Hat Backs, and Bags
 |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Great for smaller, narrower embroidery projects such as shirt sleeves, pant legs,
Two Stations
Two Hooping Pro stations are available – An optional “Full Station” for polo shirts, t-shirts, jackets, etc. and the narrower “Project Station” on this page for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.
Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.
Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.
Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.
Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.
Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.
Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Two Stations
Two Hooping Pro stations are available – An optional “Full Station” for polo shirts, t-shirts, jackets, etc. and the narrower “Project Station” on this page for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.
Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.
Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.
Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.
Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.
Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.
Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee Project Station Demo:
Durkee Project Stations Plus Boards:
Click here to watch the Optional Durkee Hooping Pro – Introduction
Durkee Optional Hooping Pro-Left Chest and Jacket Back
Optional Durkee Hooping Pro – Freedom Ring Demo:
Durkee Hooping Station HPElitePkgPackage Includes one (1) each: HP1 (Full Station), HP Infant Board, HP Junior Board, HP Plus Board, and two (2) HP2
 Durkee Hooping Station HPElitePkgPackage |
Our Price: $1,315.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Hooping Station HPElitePkgPackage Includes one (1) each: HP1 (Full Station), HP Infant Board, HP Junior Board, HP Plus Board, and two (2) HP2
Non-US Warranty: 30 days parts and labor.
Durkee Hooping Station HPInfant PkgPackage Includes: one (1) each: Hooping Pro 2 (Project Station) Plus HP Infant Board
 Durkee Hooping Station HPInfant Package |
Our Price: $335.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Hooping Station HPInfant PkgPackage Includes: one (1) each: Hooping Pro 2 (Project Station) Plus HP Infant Board
Non-US Warranty: 30 days parts and labor.
Durkee Hooping Station HPJunior PkgPackage Includes: one (1) HP2 (Project Station) plus HP Junior Board
 Durkee Hooping Station HPJunior Package |
Our Price: $365.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Hooping Station HPJunior PkgPackage Includes: one (1) HP2 (Project Station) plus HP Junior Board
Non-US Warranty: 30 days parts and labor.
Durkee Hooping Station HPPlus PkgPackage Includes one (1) each: HP2 (Project Station) and a HP Plus Board
 Durkee Hooping Station HPPlus Pkg Package |
Our Price: $375.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
Durkee Hooping Station HPPlus PkgPackage Includes one (1) each: HP2 (Project Station) and a HP Plus Board
Non-US Warranty: 30 days parts and labor.
Durkee Hooping Station HPPlusAllBoardsPkgPackage Includes one (1) each: HP2 (Project Station), HP Infant Board, HP Junior Board, HP Plus Board
 Durkee Hooping Station HPPlusAllBoardsPkg Package |
Our Price: $615.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Hooping Station HPPlusAllBoardsPkgPackage Includes one (1) each: HP2 (Project Station), HP Infant Board, HP Junior Board, HP Plus Board
Non-US Warranty: 30 days parts and labor.
Durkee JN-09cm Round 3-3/16“ Diameter Embroidery Hoop for Janome MB4
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 9cm (3.5") round frame.
Fits Janome MB-4 machines.
Common uses: cuffs, collars, pockets, hat sides.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
Fits Janome MB-4 machines.
Common uses: cuffs, collars, pockets, hat sides.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN-12cm Round 4-3/8” Embroidery Hoop Janome MB4 Embroidery Machines
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 12cm (4 3/8") round frame.
Fits Janome MB-4 machines.
Common uses: hat backs, hat sides, smaller left chest.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fits Janome MB-4 machines.
Common uses: hat backs, hat sides, smaller left chest.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN--12.5x24cm-360 5x9" Rectangle Embroidery Hoop Frame & Brackets for Shirt Sleeves & Pant Legs on Janome MB4 MB7 Embroidery Machines
 |
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Use it for: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Use it for: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN-15cm Round 5-5/8” Diameter Embroidery Hoop for Janome MB4 MB7
 27743: Durkee JN-15cm Round 5-5/8” Diameter Embroidery Hoop for Janome MB4 MB7 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 15cm (5 5/8") round frame.
Fits Janome MB-4 machines.
Common uses: most popular left chest size.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fits Janome MB-4 machines.
Common uses: most popular left chest size.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN-1515cm Square 6x6 Inch Embroidery Hoop for Janome MB4 Needle Machines
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 15cm x 15cm (6″×6″) square frame.
Fits Janome MB-4 machines.
Common uses: tote bags, back packs, small jacket backs.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fits Janome MB-4 machines.
Common uses: tote bags, back packs, small jacket backs.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN-18cm Round 6-3/4” Embroidery Hoop with Brackets for Janome MB4 Embroidery Machines
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 18cm (6 3/4” Diameter) round frame.
Fits Janome MB-4 machines.
Common uses: larger left chest, small jacket back.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fits Janome MB-4 machines.
Common uses: larger left chest, small jacket back.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN-24x24cm 9x9" Square Embroidery Hoop for Janome MB4 Embroidery Macgubes
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Hoop picture SHOWS THE HOOP ONLY but are shipped to you WITH THE BRACKETS ATTACHED!
Double height, 24cm x 24cm (9″×9″) square frame.
Fits Janome MB-4 machines.
Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Double height, 24cm x 24cm (9″×9″) square frame.
Fits Janome MB-4 machines.
Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN-3010cm 30cm x 10 cm Rectangle (11 7/8"x4") Embroidery Hoop for Janome MB4 Embroidery Machine
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
30cm x 10cm (12″×4″) rectangle frame.
Fits Janome MB-4 machines.
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fits Janome MB-4 machines.
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee JN-3015cm 11 7/8x6” Embroidery Hoop for Janome MB4 Embroidery Machine
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
30cm x 15cm (12″×6″) rectangle frame.
Fits Janome MB-4 machines.
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fits Janome MB-4 machines.
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee Hoops EZ Framer MAX Pro Pack: EZ Framer MAX PLUS Hooping Station, 12in1 Piece EZ Frame Master Set EZ Frames for BroPR/BL 6 & 10 Needle Machines
 Durkee Hoops EZ Framer MAX Pro Pack: EZ Framer MAX PLUS 12in1 Piece EZ Frame Master Set EZ Frames for Br/BL 6 & 10 Needle Machines Only |
Our Price: $999.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee has taken the hassle out of hooping! The EZ Framer MAX is an easy, simple device anyone can use, understand, and enjoy that makes embroidery more fun!
Introducing the
EZ Framer MAX Pro Pack
The EZ Frames 12 PC Master Set and EZ Framer MAX are perfect partners for making your embroidery projects faster, easier, and more fun!
Most embroiderers agree their two greatest challenges with embroidery are hooping and centering a design within a hoop. Just imagine...no thumbscrews, no hoop pop-off, no hoop burn! With Durkee EZ Frames you don’t have to imagine! And, getting your garment perfectly centered on your frame or hoop has never been easier than now with the EZ Framer MAX!
EZ Framer MAX
EZ Framer MAX Pro Pack
The EZ Frames 12 PC Master Set and EZ Framer MAX are perfect partners for making your embroidery projects faster, easier, and more fun!
Most embroiderers agree their two greatest challenges with embroidery are hooping and centering a design within a hoop. Just imagine...no thumbscrews, no hoop pop-off, no hoop burn! With Durkee EZ Frames you don’t have to imagine! And, getting your garment perfectly centered on your frame or hoop has never been easier than now with the EZ Framer MAX!
EZ Framer MAX
- Easy to understand - easy to use hooping device for the home or commercial embroiderer
- Eliminates table hooping/framing
- Cross-hair laser light makes centering designs quick and easy
- Lightweight - is portable or can be mounted permanently
- Use any hoop/frame from any manufacturer up to 16 1/2" O.D.
The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
- 1 1/2" x 4"
- 2" x 4"
- 2 1/2" x 4"
- 3" x 4"
- 3" x 8"
- 5" x 4"
- 5" x 8"
- 7" x 5"
- 8" x 8"
- 12" x 4"
- 12" x 8"
- Radius Frame
See for yourself just how simple hooping and alignment can be going from start to finish with EZ Frames and the EZ Framer MAX:
EZ Framer Max from Brent Taylor on Vimeo.
Non-US Warranty: 30 days parts and labor.
Durkee Durkee Multi-Needle Power Pack for BL/BR 6 & 10 Needle Machines Includes Cap Frame and 7 Piece EZ Frame Set
 Durkee Multi-Needle Power Pack for BL/BR 6 & 10 Needle Machines Includes Cap Frame and 7 Piece EZ Frame Set |
Our Price: $490.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Combine two (2) Best Selling products from Durkee for multi-needle machines and you get a true Power Pack! This package includes Durkee's World Famous Cap Frame allowing for larger designs and is much easier to use than "cylinder" type devices. Add Durkee's Seven (7) piece EZ Frame set and embroidery just got easier and more fun!
Non-US Warranty: 30 days parts and labor.
Durkee Multi-Needle Master Pack for Babylock Alliance and Brother PRS100: Includes Flat Cap Frame and 7 Piece EZ Frame Set
Durkee Multi-Needle Master Pack for Babylock Alliance and Brother PRS100: Includes Flat Cap Frame and 7 Piece EZ Frame Set |
Our Price: $490.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Combine two (2) Best Selling products from Durkee for multi-needle machines and you get a true Power Pack! This package includes Durkee's World Famous Cap Frame allowing for larger designs and is much easier to use than "cylinder" type devices. Add Durkee's Seven (7) piece EZ Frame set and embroidery just got easier and more fun!
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frames 12in1 Master Set 8pc: Adaptor arm + 1-1/2"x 4", 3"x 8", 5"x 8" & 12"x 4" for Brother PR, Babylock 6-10 Needle Machines Only
 94151: Durkee Hoops EZFrames 12in1 Master Set: 12 Most Popular Size EZ Frames PLUS Blue Adaptor Arm EZ for Brother PR/Babylock 6-10 Needle Machines Only |
Our Price: $529.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The two most frequently heard comments from EZ Frame owner/users are:
“I can’t believe how stable they are” and “I’ll never hoop again!”
There is no substitute for having the frames you need - when you need them! From baby bibs to boots, Onesies® to tote bags, tea towels to bath towels, pockets to purses, table napkins to tennis shoes and more...
The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
“I can’t believe how stable they are” and “I’ll never hoop again!”
There is no substitute for having the frames you need - when you need them! From baby bibs to boots, Onesies® to tote bags, tea towels to bath towels, pockets to purses, table napkins to tennis shoes and more...
The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
- 1 1/2" x 4"
- 2" x 4"
- 2 1/2" x 4"
- 3" x 4"
- 3" x 8"
- 5" x 4"
- 5" x 8"
- 7" x 5"
- 8" x 8"
- 12" x 4"
- 12" x 8"
- Radius Frame
How to use the Durkee easy frames.
Tips for Maximizing Your Sewing Field with EZ Frames from Durkee
Non-US Warranty: 30 days parts and labor.
Specifications
The EZ Frames Master Set is ready to go to work on your next embroidery project!This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
1 1/2" x 4"
2" x 4"
2 1/2" x 4"
3" x 4"
3" x 8"
5" x 4"
5" x 8"
7" x 5"
8" x 8"
12" x 4
12" x 8"
Radius Frame
Durkee 12.5CM x 24CM (5"x9" I.D.) Rectangular Hoop - for Brother PRS 100 Persona and Babylock Alliance BNAL
 |
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Durkee 5 x 9 Hoop Frame Baby Onesie Tutorial by Mike Johns
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Durkee 5 x 9 Hoop Frame Baby Onesie Tutorial by Mike Johns
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee PR12.5x24cm 5x9" Hoop Frame & Brackets for Arm A on Brother PR600's, PR1000, PR1050X, PR1055 Babylock 6-10 Needle Embroidery Machines
|
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 15cmx15cm (6"x6" I.D.) Square Hoop-for Brother PRS100 Persona and BL Alliance
 |
Our Price: $42.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 15cm x 15cm square frame. Fits Brother Persona, and Babylock Alliance Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee 24x24cm 9x9" Square Hoop for Brother PRS100 Persona and Babylock Alliance BNAL
 |
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee PR2424 Most Popular 9x9" Hoop. Also works for 5x7" Designs* With Side Brackets Included for Brother Persona Embroidery Machines using your Arm A, not Arm B. *
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to the size of your machine's embroidery area, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother Persona and Babylock Alliance Single Needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to the size of your machine's embroidery area, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother Persona and Babylock Alliance Single Needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is great for embroidering children’s clothing and larger square designs that round hoops cannot accommodate.This Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is constructed of high impact plastic making it virtually indestructible. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square has brass inserts for all screws, light texture on the hooping surface, directional guides, and extra height, which aids in holding thicker, harder to hold garments. The adjusting rings' thumb screws on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are large and long to provide more torque and have a wider space for adjustments. The metal clips on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are extra long, aiding in vibration reduction. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square metal clips are zinc plated to provide reduced wear, and they come complete with plastic screws and lock washers.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square Advantages:
Directional guides.
Thumb screw is larger and longer than our competitors'.
Wide space thumb screw adjusting.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee PR3010 30x10cm (11 7/8 x 4) Rectangle Embroidery Frame Single Hoop with Brackets for Brother PR6-10 Needle, Babylocks
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke. Single hoop design for adhesive stabilizers on bottom of hoop to hold project to top of hoop.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, Pr655, PR670E and the Baby Lock EMP6, BMP8, and BMP9 6 needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, Pr655, PR670E and the Baby Lock EMP6, BMP8, and BMP9 6 needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR3015 12x6" Hoop & Brackets for Brother PR6, PR1000, PR1050X, PR1055X, Babylock
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
30cm x 15cm (12"×6") rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000 and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000 and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR09RD 3-3/16" Round Hoop Brackets Brother PR600 PR1000 Babylock
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR12RD 4.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050X, Babylock
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
(4 3/8"Diameter) Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR1515cmSQ 6x6 Hoop Frame +Brackets for Brother PR600 PR620 PR650 PR655 PR670 PR680 PR1000 PR1050X PR1055 +Babylock Freearm Embroidery Machines
|
Our Price: $42.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR15RD 5.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050 Babylock
 Durkee PR15RD 5.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050 Babylock |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Dimensions 5.5" (5 5/8" Diameter), Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR18RD 7" Round Hoop & Brackets, Brother PR600 PR1000 Babylock
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR2424SQ Square 9x9" Hoop & Brackets for Brother PR600 PR620 PR650 PR655 PR670, PR1000, PR1050, Babylock* Sews 8x8" or Split Designs up to 4x8"
|
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee PR2424 Most Popular 9x9" Hoop. Also works for 5x7" Designs* With Side Brackets Included for Brother PR600, PR620, PR650, PR1000, BabyLock EMP6, BMP8, BMP9, ENT10, and BNT10 Embroidery Machines using your Arm A, not Arm B. *
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to 8x9" designs on Brother PR machines, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000, and the PR1000e and the Baby Lock EMP6, BMP8, BMP9 and ENT10 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to 8x9" designs on Brother PR machines, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000, and the PR1000e and the Baby Lock EMP6, BMP8, BMP9 and ENT10 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is great for embroidering children’s clothing and larger square designs that round hoops cannot accommodate.This Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is constructed of high impact plastic making it virtually indestructible. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square has brass inserts for all screws, light texture on the hooping surface, directional guides, and extra height, which aids in holding thicker, harder to hold garments. The adjusting rings' thumb screws on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are large and long to provide more torque and have a wider space for adjustments. The metal clips on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are extra long, aiding in vibration reduction. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square metal clips are zinc plated to provide reduced wear, and they come complete with plastic screws and lock washers.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square Advantages:
Directional guides.
Thumb screw is larger and longer than our competitors'.
Wide space thumb screw adjusting.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square works with:
Brother PR600
Brother PR-600C
Brother 600II
Brother 620
Brother 650
Brother PR1000
Brother PR1000e
Babylock EMP6
Babylock BMP8
Babylock BMP9
Babylock ENT10
Tajima Embroidery Machines
Toyota Embroidery Machines
Renaissance Embroidery Machines
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PTA-30300-360 12in (30cm/360mm) Square Tubular Double Height Jacket Back Embroidery Hoop Frame for Happy Embroidery Machines
 |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Durkee “Plus” Size Board Attachment Slides on Top of HP2 Project Station
 |
Our Price: $150.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
You must already have the existing HP2 station to use this attachment.
This video explains all three additional station options for the HP2 Product Station.
Non-US Warranty: 30 days parts and labor.
Durkee Quilt/Border Sash Frame Hoop w/Clip Clamps 8x8 8x12 8x14 or 14x14 Jumbo for Brother BabyLock Tubular Arm Multi Needle Machines PRS100 PR6 PR10
 103279: Durkee Quilt & Border Frame Hoop, Choose Size 8"x8", 8"x12", 8"x14" 14"x14" Jumbo for Brother/Baby Lock Tubular Arm Machines Only PR6 and PR10 Needles |
Our Price: $199.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Quilt/Border Frames are multi-purpose frames specifically designed to help create "large format" embroidery projects.
These frames are great for quilting, creating multiple patches or badges in one hooping, towels, jacket backs and the list goes on.
If you need your fabric and stabilizer to be held securely for high density stitching for projects such as photo stitching - you just found your solution! No need to use any sticky stabilizers with the clamp hoop!
Durkee Quilt/Border frames - the embroiderer's new best friend!
These frames are great for quilting, creating multiple patches or badges in one hooping, towels, jacket backs and the list goes on.
If you need your fabric and stabilizer to be held securely for high density stitching for projects such as photo stitching - you just found your solution! No need to use any sticky stabilizers with the clamp hoop!
Durkee Quilt/Border frames - the embroiderer's new best friend!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee Quilt/Border Frames are multi-purpose frames specifically designed to help create “large format” embroidery projects. These frames are great for quilting, creating multiple patches or badges in one hooping, towels, jacket backs and the list goes on. If you need your fabric and stabilizer to be held securely for high density stitching for projects such as photo stitching – you just found your solution! Durkee Quilt/Border frames – the embroiderer’s new best friend!Introducing Quilt/Border Frames for Brother & Baby Lock Tubular Arm Machines
THE ALLBRANDS SHOW | New from Durkee! Feat. Brent Taylor and Cindy Hogan
Durkee 7in1 EZ Single Frames & Arm: Brother PR600-PR1055, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back Ø(Fast Frames+)*
65692: Durkee SAEZ7MN 7in1 EZ Single Frames Tubular Hoops 3/16" Aluminum for Brother PR6 PR1000 1050X |
Our Price: $349.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
ABOUT THE PRODUCTDurkee‡ frames offer you a simple, yet effective way to hoop your more difficult-to-hoop items. Hold your fabric in place with our adhesive stabilizer and start stitching. This 7-piece set comes with the Main Attachment Arm, (1) 2” x 4”, (1) 2.5” x 4”, (1) 3” x 4”, (1) 5” x 4”, (1) 7” x 5”, and (1) 8” x 8” hoops, and Cap Back/Radius frame. Comes with Durkee’s limited lifetime replacement warranty. Adhesive stabilizer, SA5820 or SA5815 is required. Additional purchase required.
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 14x14 560mm Jumbo Sturdi Frame Multi Position Hoop Complete For B Arms on Brother PR1000 PR1050X Babylock 10 Needle, Add Split Designs Software
 85245: Durkee 14x14" Jumbo SturdiFrame Complete Unit For "B" Arms on Brother and Babylock 10 Needle Machines |
Our Price: $199.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
We are proud to announce two the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The frame measure 14" x 14" (sewing field) and is to be attached to the “B” arms of the 10 needle machine. The frame will be recognized as the 14" x 14" Jumbo hoop. This frame is excellent for split design projects requiring a larger sewing field.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The frame measure 14" x 14" (sewing field) and is to be attached to the “B” arms of the 10 needle machine. The frame will be recognized as the 14" x 14" Jumbo hoop. This frame is excellent for split design projects requiring a larger sewing field.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Sturdiframe
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 7-7/8" x 11 3/4" Sturdi Frame for A Arms on Brother and Babylock 6 & 10 Needle Machine, Add Adhesive Stabilizers
 85246: Durkee 7 7/8" x 11 3/4" SturdiFrame for Brother and Babylock 6 & 10 Needle Machine |
Our Price: $139.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
We are proud to announce the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7 7/8" x 11 3/4" (sewing field) and is to be attached to the “A” arms of a 10 needle machine.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7 7/8" x 11 3/4" (sewing field) and is to be attached to the “A” arms of a 10 needle machine.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Sturdiframe
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee Sturdi Frames 7-7/8" x 14" 560mm for A Arms on Brother PR1000, PR1050X and Babylock 10 Needle Embroidery Machines, Add Adhesive Stabilizers
 85244: Durkee 7 7/8" x 14" 560mm Sturdi Frame Complete Unit For "A" Arms on Brother and Babylock 10 Needle |
Our Price: $149.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
We are proud to announce the Durkee SturdiFrames for Brother and Baby Lock Ten (10) needle machines!!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
7 7/8" x 14" (sewing field) and is to be attached to the “A” arms of a 10 needle machine. The frame will be recognized by the machine as the “Extra Large” hoop.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
7 7/8" x 14" (sewing field) and is to be attached to the “A” arms of a 10 needle machine. The frame will be recognized by the machine as the “Extra Large” hoop.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Sturdiframe
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 7-7/8" x 8" Sturdi Frame for A Arms only -Gold Series on Brother and Babylock 6 & 10 Needle Embroidery Machines, Add Adhesive Stabilizers
 85247: Durkee 7 7/8" x 8" SturdiFrame for Brother and Babylock 6 & 10 Needle Machine |
Our Price: $119.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
We are proud to announce the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7-7/8" x 8" (sewing field) and is to be attached to the “A” arms
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7-7/8" x 8" (sewing field) and is to be attached to the “A” arms
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Durkee In-The-Hoop Pot Holder on Baby Lock Multi-Needle
Sturdiframe
Durkee In-The-Hoop Pot Holder on Baby Lock Multi-Needle
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee EZ Frame SN 9.5x9.5 Optional Hoop for Single Needle Machines Brother XV85, XJ1, XE1 Stellaire, XP1 XP2 Luminaire, Babylock Destiny, Solaris
 Durkee EZ Frame SN 9.5x9.5 Hoop for Single Needle Machines Brother XV85, XJ1, XE1 Stellaire, XP1 |
Our Price: $99.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for single-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.
Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.
When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.
Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.
When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Embroidery hoops are indispensable tools for working embroidery. They come in a wide range of sizes, styles and materials, and every company has their own favorite brand. Using a hoop also makes it easier to count the threads when worked a counted thread projects.
Before starting the project, the embroidery fabric is placed in the hoop, pulling it taunt and tightening the outer hoop to hold the fabric into position. This taunt fabric base makes it easier to create well-formed stitches that are evenly spaced and uniform in size, as compared to holding the fabric in the hands without a hoop, which can cause the stitch tension to be too tight or too loose. Your choice of size and shape depends entirely on the project and your preference, however, when selecting a hoop, remember that the fabric must completely fill the hoop in order to keep it tight.
When browsing and buying hoops, you will notice that some hoops tighten and loosen with a thumb screw, while others are tension or spring operated or have sections that snap together without tightening.
Hoops that are tension or spring operated are made from a combination of metal and plastic and have a lip. There are also different material that the hoops can be made out of. Wooden hoops, which can be made from pine, hardwood or bamboo do not have a lip. Metal hoops are durable and will last longer than any other type of hoop.
When using an embroidery hoop the hoop is attached to the stands with either a clamp, or secured in place through the sides of the hoop using wing nuts or thumb screws and now even magnets. No Thumbscrews.
Non-US Warranty: 30 days parts and labor.
Specifications
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee HoopsDurkee 8" x 12" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines
 Durkee 8" x 12" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines |
Our Price: $245.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Sometimes called a "Rail & Clamp" system, sash frames have been (and continue to be) one of the most frequently used methods of hooping/framing in the commercial embroidery industry. Why? When registration is critical and the fabric must be held tight, many would argue there is no better system. Projects such as quilting, patches & badges, free standing lace, photo stitch, end-to-end quilting and towels (just to name a few) have a perfect partner with Durkee Sash Frames.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame. If your Brother or Baby Lock machine has a Maximum Sewing Field of 9 1/2" x 14" select the 8" x 12" Sash Frames.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame. If your Brother or Baby Lock machine has a Maximum Sewing Field of 9 1/2" x 14" select the 8" x 12" Sash Frames.
Non-US Warranty: 30 days parts and labor.
Specifications
Current Brother & Baby Lock models with a Maximum Sewing Field of 9 1/2" x 14Brother
XV8500D Dream Machine
XV8550D Dream Machine
Stellaire Innov-is XJ1
Stellaire Innov-is XE1
Baby Lock
Destiny BLDY
Destiny 2 BLDY2
Altair BLTA
Meridian BLMA
Durkee 9.5" x 14" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines
 Durkee 9.5" x 14" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines |
Our Price: $265.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Sometimes called a "Rail & Clamp" system, sash frames have been (and continue to be) one of the most frequently used methods of hooping/framing in the commercial embroidery industry. Why? When registration is critical and the fabric must be held tight, many would argue there is no better system. Projects such as quilting, patches & badges, free standing lace, photo stitch, end-to-end quilting and towels (just to name a few) have a perfect partner with Durkee Sash Frames.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame.
Non-US Warranty: 30 days parts and labor.
Specifications
Current Brother & Baby Lock models w/ a Maximum Sewing Field of 10 5/8" x 16Brother
Luminaire1 Innov-is XP1
Luminaire2 Innov-is XP2
Luminaire3 Innov-is XP3
Baby Lock
Solaris BL
Solaris 2 B
Solaris Vision BLSA
Durkee Single Needle Power Pack 1 for Dream Machine2 and Baby Lock Destiny Includes: 5 Hoops (4x4", 5x7", 8x12", 9.5x9.5" 9.5x14"), +CapInsert
 Durkee Single Needle Power Pack 1 for Dream Machine2 and Baby Lock Destiny Includes: 5 Hoops (4x4", 5x7", 8x12", 9.5x9.5" 9.5x14"), +CapInsert |
Our Price: $534.80 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Brother/Baby Lock Single Needle Power Pack
As an owner/user of a Brother Dream, Dream II or, Baby Lock Destiny or Destiny II machine, you have already discovered how professional craftsmanship and design excellence can bring your embroidery projects to life. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack One will help answer that question for you. First, imagine not having to hoop your projects with traditional plastic hoops. Second, what if you could use your machine to do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible.
The set includes
- one (1) cap frame insert
- four (4) single needle EZ Frames designed for your machine: 4x4", 5x7", 8x12", 9.5x14"
PLUS
- a bonus 9.5" x 9.5" single needle EZ Frame at NO CHARGE - an $89.95 value!
See how embroidery can be made easier with Single Needle EZ Frames
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
See how you can turn a plain ball cap into a personalized masterpiece
The Durkee Single Needle Cap Frame Insert from Brent Taylor on Vimeo.
Non-US Warranty: 30 days parts and labor.
Specifications
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!Durkee 6in1 Single Needle Power Pack 2 Brother XP1 XP2 Luminaire, Baby Lock Solaris Machine: 5 Hoops (4x4 5x7 8x8 9.5x9.5 10-5/8x16) +Cap Insert 5x7
 93639: Durkee Single Needle Power Pack 2 Brother XP1 XP2 Luminaire, Baby Lock Solaris Machine: 5 Hoops (4x4", 5x7", 8x8", 9.5x9.5", 10 5/8 x 16") +Cap Insert |
Our Price: $564.80 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Brother/Baby Lock Single Needle Power Pack
The Brother Luminaire and Baby Lock Solaris embroidery machines are the envy of the embroidery industry. These machines are jamb-packed with cutting-edge technological innovations and features few would have dreamed possible just a few years ago. In fact, you might even question if or how embroidery could be any better or easier.
The Single Needle Power Pack Two compliments your machine and will help answer that question for you. First, imagine not having to hoop your projects with traditional plastic hoops. And, what if you could use your machine to do something you only thought possible with a muti-needle machine...create incredible caps! Durkee Single Needle EZ Frames and Durkee’s Patented cap frame insert make it all possible.
The set includes:
- one (1) cap frame insert
- four (4) single needle EZ Frames designed for your machine 4x4", 5x7", 9.5x9.5", 10 5/8 x 16"
PLUS
- a bonus 8" x 8" (sewing field) single needle EZ Frame at NO CHARGE - an $89.95 value!
See how embroidery can be made easier with Single Needle EZ Frames
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
See how you can turn a plain ball cap into a personalized masterpiece
The Durkee Single Needle Cap Frame Insert from Brent Taylor on Vimeo.
Non-US Warranty: 30 days parts and labor.
Specifications
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!Durkee SAEZTENPP 10 Needle Power Pack TENPP 10in1 for BR/BL10 Needle Machines, 14x14 Multi Position Sturdi Frame, 7PC Set EZ Frames, Arm, PR Cap Frame
 90978: Durkee Ten Needle Power Pack 10in1 EZ Frames Hoops Set 3/16" Aluminum for Brother PR6 PR10 & Babylock |
Our Price: $699.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee proudly introduces their Ten Needle Power Pack created specifically to “Optimize” ten needle machine owners embroidery experience. This package includes three (3) Best Sellers from Durkee Hoops. Each was designed for its’ own ease of use, practical application for simplifying difficult to hoop items, and for product durability. This package will truly enhance the value and enjoyment of your ten needle machine. The first item is the Durkee 14" x 14" (sewing field) SturdiFrame. It is to be attached to the “B” arms of the 10 needle machine and the frame will be recognized as the 14" x 14" Jumbo hoop. This frame is excellent for split design projects requiring a larger sewing field. Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the “B” arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the frame and press down to adhere the fabric to the backing and stitch!
Smaller projects...no problem! The second item in the Power Pack is the EZ Frame 7 piece combo pack. This incredibly versatile selection of frame sizes makes difficult to hoop items a breeze. Durkee EZ Frames provide a stable platform for your embroidery projects. Better stability means less bounce, better registration, and better results!
The third member of the Power Pack has literally changed thousands of embroiderers' attitudes from refusing to attempt embroidering caps to self-proclaimed cap embroidery artists...the Durkee Multi-Needle Cap Frame. The Durkee Cap Frame offers a sewing field as large as 5" wide and 4 1/2" tall for logos, special designs, or monograms. Perhaps the best of all is its’ simplicity of use;the cap frame fits into the “A” arm of the ten needle machine just like a traditional hoop.
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Smaller projects...no problem! The second item in the Power Pack is the EZ Frame 7 piece combo pack. This incredibly versatile selection of frame sizes makes difficult to hoop items a breeze. Durkee EZ Frames provide a stable platform for your embroidery projects. Better stability means less bounce, better registration, and better results!
The third member of the Power Pack has literally changed thousands of embroiderers' attitudes from refusing to attempt embroidering caps to self-proclaimed cap embroidery artists...the Durkee Multi-Needle Cap Frame. The Durkee Cap Frame offers a sewing field as large as 5" wide and 4 1/2" tall for logos, special designs, or monograms. Perhaps the best of all is its’ simplicity of use;the cap frame fits into the “A” arm of the ten needle machine just like a traditional hoop.
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Eight (8) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- 12" x 8"
- Cap Back/Radius Frame
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 9 Embroidery Double Height Hoops Frames Brackets for Janome MB4 MB7
 |
Our Price: $399.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Hoop picture SHOWS THE HOOPS ONLY but are shipped to you WITH THE BRACKETS ATTACHED for Janome MB4! EZ TURN Thumbscrews
Includes the following (9) Durkee Embroidery Hoops for the Janome MB4 Embroidery Machine
Double height, 9cm (3.5") round frame
Common uses: cuffs, collars, pockets, hat sides
Double height, 12cm (4 3/8") round frame
Common uses: hat backs, hat sides, smaller left chest
Double height, 15cm (5 5/8") round frame
Common uses: most popular left chest size
Double height, 15cm x 15cm (6"×6") square frame
Common uses: tote bags, back packs, small jacket backs
Double height, 18cm (6 3/4” Diameter) round frame
Common uses: larger left chest, small jacket back
Double height, 24cm x 24cm (9″×9″) square frame
Common uses: Children’s clothing, larger square designs round hoops cannot accommodate
30cm x 10cm (12"×4") rectangle frame
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke
30cm x 15cm (12″×6″) rectangle frame
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke
12.5x24cm-360 5x9" rectangle frame
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
These hoops carry a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Grids not available.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Includes the following (9) Durkee Embroidery Hoops for the Janome MB4 Embroidery Machine
Double height, 9cm (3.5") round frame
Common uses: cuffs, collars, pockets, hat sides
Double height, 12cm (4 3/8") round frame
Common uses: hat backs, hat sides, smaller left chest
Double height, 15cm (5 5/8") round frame
Common uses: most popular left chest size
Double height, 15cm x 15cm (6"×6") square frame
Common uses: tote bags, back packs, small jacket backs
Double height, 18cm (6 3/4” Diameter) round frame
Common uses: larger left chest, small jacket back
Double height, 24cm x 24cm (9″×9″) square frame
Common uses: Children’s clothing, larger square designs round hoops cannot accommodate
30cm x 10cm (12"×4") rectangle frame
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke
30cm x 15cm (12″×6″) rectangle frame
Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke
12.5x24cm-360 5x9" rectangle frame
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
These hoops carry a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Grids not available.
MB-4 Embroidery Hoop Help Page Download (.PDF)
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Janome MB4 and MB7 multi needle machines do have adjustable arms. They have their “standard width” and will adjust down to a 14” width (360mm just like Tajima). We have our multi needle cap frame, EZ Frames, and most of our standard size plastic hoops available for those two machines and are shown on our website. The widest EZ Frame for their machines is our 8” x 8” like the Persona PRS100.
Durkee 9 Hoops Round: 3.5, 4.5, 5.5, 7, Squares: 6x6, 5x9, 9x9, Large: 12x4, 12x6" for Brother PR6-1000 and Babylock
 |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Includes the following 9 Durkee Embroidery Hoops:
PR09 9cm, 3.5" (3 3/16"Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR12 12cm 4.5" (4 3/8"Diameter) Round Frame Hoop & Brackets
Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR15 15cm or 5.5" (5 5/8" Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR1515,15x15cm (6x6") Square Embroidery Frame Hoop & Brackets
Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR18 18cm, 7" (6 3/4" Diameter) Round Embroidery Frame Hoop & Bracket
Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR2424 24cm x 24cm (9"x9") Square Embroidery Frame Hoop & Brackets
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3010 30x10cm (11 7/8" x 4") Rectangle Emb Frame Hoop & Brackets
30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3015 30x15cm (12x 6") Rectangle Embroidery Frame Hoop & Bracket
30cm x 15cm (12″×6″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
12.5x24cm-500 5x9" Rectangle Embroidery Frame Hoop & Brackets
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
PR09 9cm, 3.5" (3 3/16"Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR12 12cm 4.5" (4 3/8"Diameter) Round Frame Hoop & Brackets
Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR15 15cm or 5.5" (5 5/8" Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR1515,15x15cm (6x6") Square Embroidery Frame Hoop & Brackets
Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR18 18cm, 7" (6 3/4" Diameter) Round Embroidery Frame Hoop & Bracket
Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR2424 24cm x 24cm (9"x9") Square Embroidery Frame Hoop & Brackets
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3010 30x10cm (11 7/8" x 4") Rectangle Emb Frame Hoop & Brackets
30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3015 30x15cm (12x 6") Rectangle Embroidery Frame Hoop & Bracket
30cm x 15cm (12″×6″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
12.5x24cm-500 5x9" Rectangle Embroidery Frame Hoop & Brackets
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee 8x12in x 3/16in Thick Aluminum Hoop Frame one of many Tubular EZ Flat Frames for Brother and Babylock PR6 to PR10 Needle Embroidery Machines
 65751: Durkee 8x12in x 3/16in Thick Aluminum Screw On Hoop to go along with other Durkee Tubular EZ Flat Frames for Brother PR600 to PR10 Embroidery Machines |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.