• 4"
  
• Precision
  
• 5x Harder than steel
  
• Stays sharper longer
  
• Superior adhesion resistance
  
• Corrosion resistant
  
• Cushion rib grip Handle
  
• Knife edge

• 4” Scissors: Large rings provide comfortable finger and thumb access for making small precise cuts. High grade German stainless steel blades with razor sharp edges perform flawlessly.
  
  


• 6” Scissors: Great for your mid-to-large cutting needs for sewing, quilting and embroidery. These 6” sharp point trimming scissors are made of high grade German stainless steel blades with razor sharp edges.
  
  
  


• Sharp Metal Pointer: Use the ultra-sharp point stiletto instead of your finger for dozens of sewing/embroidery tasks such as appliquéing in the hoop, joining lace, machine ribbon embroidery, pressing small items and guiding fabric under the needle. When stored, the pointy tip screws into the protective handle and is easily assembled for use.
  
  


• Thread Snips: These super lightweight and easy to use scissors are ideal for trimming loose threads or jump stitches on hooped embroidery. The narrow curved blade makes it easy to trim hard to reach or tight areas that standard scissors are too large to handle. Plus the spring-like action makes these scissors pain-free for anyone with arthritis. Convenient for left or right handed users.
  
  


• Applique Scissors: Protect your base fabric when trimming appliqué. Slide the ½” wide duck bill between the appliqué fabric and base fabric to make clean precise cuts.
  
  


• Opposable Tweezers: Unlike traditional tweezers that can strain the fingers with prolonged use, these tweezers are self-closing and feature an angled tip. Hold items securely then squeeze the handles to release the items. These reverse tweezers are ideal for use with hard to grasp items like beads, crystals and other small embellishments.
  
  

• 10mm: underwear ,cloth,textile ,knitwear,felt,blanket, curtain
  
• 7mm: five layer cardboard, 17 sheets of A4 paper, one sheet is 80g
  
• 5mm: leather, carpet, plastic, fiberglas, rubber
  
  Included Accessories:
  Fuselage
  Cutter head A (sharp/short working life/cutting quickly for hard and thick)
  Cutter head B (blunt/long working life/cutting slowly for soft and thin )
  Battery
  Plug battery
  AC Power adapter
  Charging stand
  
  WBT-1 Portable Electric Scissors:
  With Sharp/Blunt Cutting Head
  Can cut various kind products of cotton and felt products within a thickness of 15mm
  Can cut various kind products of cloth, textile and fabric within a thickness of 8mm
  Can cut various kind products leather, rubber and Kevlar within a thickness of 5mm
  
  

  Specifications

  
  
• Rated voltage of charger: 100-240V
  
• Output power: 35W
  
• Cutting capacity: 0-10mm (depend on material)
  
• Blade material: Tungsten steel
  
• Charging Time: 2 hours
  
• Operating Time: 60 minutes (Fully Charged)
  
• Place of Origin: Fujian China
  
• Brand Name: WBT
  
• Machine body weight:0.376KG
  
• Application:Industry and Household
  
• Operate: Two using types,with cord (can continuously work) and recharge battery
  

Wolff 9" High Leverage Shears with Ball - High Quality

• Razor sharp blades cuts easily through all threads and fabrics.
  
• The ideal size for sewing baskets or a craft tote.
  
• Versatile 5" sewing scissors are ideal for quilters, sewers and crafters.
  
• Slightly longer knife edge and sturdy frame cuts multiple layers of fabric easily from tip to point every time.
• Durable double-plated chrome over nickel will ensure the scissors will last a lifetime.
  
• Includes fitted leather sheath.
  
  
• Designer Series: Sawyer

• Place fabric on cutting board
  
• Line your KISS at opposite end at the cutting line
  
• Turn on laser and align notch with cutting point
  
• Place scissors at cut line, seeing red laser at tip of scissors and across fabric
  
• Cut straight on the KISS laser line
  

• Place fabric on cutting board
  
• Line your Nifty Notions Laser Guide at opposite end at the cutting line
  
• Turn on laser and align notch with cutting point
  
• Place scissors at cut line, seeing red laser at tip of scissors and across fabric
  
• Cut straight on the Nifty Notions Laser Guide laser line
  

• The Micro Tip scissors are a great little time-saving tool for your applique, sewing, quilting, and embroidery projects.
  
• Great for snipping tiny hard to reach places, poking through fabric, snipping tiny tight threads, and even for creating buttonholes.
  
• When you need sharp fine pointed scissors, there is only one, the Micro-Tip scissors.
  
• The handles Large Rings allow you to get in and out of the scissors quickly and easily.
  
• As usual, our hand-crafted Famore brand scissors are forged from a German grade stainless steel and are:
  
• Non-corrosive, and is easy for cleaning & care.

• Smaller Size – perfect companion for on-the-go quilting/sewing bag.
  
• Fine tips – allow you to get under tight stitches.
  
• Can be Re-Sharpened – since we use a high quality German stainless steel.
  
• Eliminate those accidental snips of the fabric!
  
• Use for snipping stitches or cutting tail end off threads and knots for needlework, embroidery, quilting and sewing

• Hand-crafted razor sharp blades – Cuts all types of fabrics from light to heavy. These scissors have a razor edge grind blades resulting in a cut like a hot knife through butter.
  
• Versatility – These scissors help complete you’re sewing, quilting, and crafting projects with ease. These little but powerful scissors are perfect for stencils and detailed crafts.
  
• Famore – #719 scissors might be small but are powerful scissors useful for stencils and detailed crafts.
  
• Power-lock Screw – So scissors can be adjusted after sharpening or repaired, giving these scissors a long lifetime and making potentially a new family heirloom. (Screw can be lubricated with sewing machine oil)
  
• All purpose can mean messy projects, So our All Purpose Scissors are Forged from the best German stainless steel also makes them: Non-allergenic, Easy for cleaning and care.

• Our Mini Duckbill Applique Scissors are a product we built for professional needle art educators.
  
• Working close with industry educators has allowed us to build the perfect tools for your optimal crafting needs, and the Mini Duckbill is another fine example.
  
  Famore 4.5-inch Mini Duckbill Applique scissors have a ½ inch duck bill – to provide a high degree of precision making it possible to trim around edges with the greatest of ease.
  
  Designed with razor-sharp blades, a tension adjustment screw, and offset handles:
  
  
• The blades are joined with a screw & bolt, not a rivet - So the scissors can be adjusted, repaired, and sharpened if they are damaged.
  
• The Mini Duckbill are essential for the people who enjoy sewing projects.

• Hot fixed crystal art
  
• Remove Threads
  
• Use in place of a stiletto
  
• Remove small stabilizer
  

• Superior Adhesive Resistance
  
• Stays Sharper Longer
  
• Superior Corrosion Resistance
  
• Precision Ground Stainless Blades
  
• Cushioned RibGrip Handles

• Straight
  
• 5x Harder than steel
  
• Stays sharper longer
  
• Superior adhesion resistance
  
• Corrosion resistant
  
• Cushion rib grip Handle
  
• Knife edge

• 8"
  
• Straight
  
• 5x Harder than steel
  
• Stays sharper longer
  
• Superior adhesion resistance
  
• Corrosion resistant
  
• Cushion rib grip Handle
  
• Knife edge

• 8"
  
• bent
  
• 5x Harder than steel
  
• Stays sharper longer
  
• Superior adhesion resistance
  
• Corrosion resistant
  
• Cushion rib grip Handle
  
• Knife edge

• Superior Adhesive Resistance
  
• Stays Sharper Longer
  
• Superior Corrosion Resistance
  
• Precision Ground Stainless Blades
  
• Cushioned RibGrip Handles

• 120 Volt, 40 Watt, 1250 Rpm
  
• Weighs Only 2 Pounds
  
• Commercial Cutting Strength
  
• 2.25" Inch Rotary Knife Blade
  
• Cuts Up To 1/2" Material
  
• Electric Rotary Cutter
  
• Same specs as Eastman Red Chickadee sold to garment factories at a higher price below.
  
  
  

• Cuts Fabric, Paper, And Other Materials
  
• Can Operate With Cord Or Cordless
  
• All Purpose And Shoe Blades
  
• Battery, Charger And Adapter
  
• Cord/Cordless Electric Scissors
  
• Superior ergonomic design. Requires much less effort to use than cutting manually.
  
• Light weight and maneuverable.
  
• Rechargeable long lasting battery. No cord to worry about.
  
• Carbide insert blades for longer wear.
  
• Can be operated with cord and battery adapter (supplied) for unlimited cutting time.
  
• Short rapid strokes for intricate work.
  
• Not recommended for material over 1/8 inch thick due to short stroke.
  
• All parts included in the kit are also available as spare parts.
  
  * Cuts Aramid Fibers, Kevlar and other tough fabrics.
  *Cuts Kevlar, Carbon and Glass Fibers, Pre-pregand Composites.
  *Cut Fiberglas™, Dyneema™, Kevlar™, Spectra™, Vectran™, Twaron
  * Superior ergonomic design. Requires much less effort to use than cutting manually.
  * Light weight and maneuverable.
  * Rechargeable long lasting battery. No cord to worry about.
  * Carbide insert blades for longer wear.
  * Can be operated with cord and battery adapter (supplied) for unlimited cutting time.
  * Short rapid strokes for intricate work.
  * Not recommended for material over 1/8 inch thick due to short stroke.
  * All parts included in the kit are also available as spare parts.
  
  Like a hot knife through butter! Give your fingers a break and take the work out of cutting. These electric shears make quick work of Fiberglass, Carbon fiber and Kevlar fabrics at the push of a button. Its unique blade configuration cuts fabrics and vinyls with ease but can't cut your fingers. Rechargable battery provides hours of use between charges and eliminates the need for awkward or restrictive power cords. Ships complete with blades, rechargable battery, battery charger, AC adapter, and transformer.
  
  
• Battery is a 7.5 volt Ni-Cad rechargeable battery
  
  Model EC 1 Battery powered cutter. Comes with battery and charger.
  <>Features:
  -Cuts Aramid Fibers, Kevlar® and other tough fabrics.
  -Superior ergonomic design. Requires much less effort to use than cutting manually.
  -Light weight and maneuverable.
  -Rechargeable long lasting battery. No cord to worry about.
  -Carbide insert blades for longer wear.
  -Can be operated with cord and battery adapter (supplied) for unlimited cutting time.
  -Short rapid strokes for intricate work.
  -Not recommended for material over 1/8 inch thick due to short stroke.
  -All parts included in the kit are also available as spare parts.
  
  EC 1 Demonstration
  

• Cuts small and large lengths of sythetic woven or knitted fabric in straight lines and curves while simultaneously fusing the edges to prevent fraying. The blade heats quickly, eliminating idle time. Also suitable for cutting and welding ropes, cords, and cables made of fully synthetic fibers such as nylon and polyester.
  
  
• Hot cutting is made easy with the HSG-0 hand held cutter. Heats up in just 6-8 seconds, and cuts and seals the edges of synthetic fabric, such as cords, ropes, bands and belting fabric.
  
  
• This cutter is so easy and economical to use; you will wonder how you did without it.
  
  
• Made for cutting acrylic fabrics. Excellent to cutting nylon rope or webbing. Cuts and welds ends cleanly! The newer model has lights to help with following cut lines.
  Type HSGO AC only, 110v- 60Hz, 60 W, UL Listed 71B9
  
  
• Heat may be controlled by switching tool on and off. Light activated by heat switch.
  
  
• Re: cutting PVC coated material. PVC releases a hazardous fume when cut with heat that has been known to cause lung problems.
  
  HSGM HSG-0 Heat Cutter (SKU: H/100, 110V/60Hz/70W). Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Heat up time of a blade, approx. 6-8 seconds. Heat temperature of a blade, approx. 1100 degrees Fahrenheit (600* C.). Blade heat may be roughly controlled by depressing/releasing the trigger. A variety of different sytle HSGM blades are sold separately. This unit is also available in 220 volt (Part #H/100-220). This product is always in stock. Made in Germany.

• 4" classic embroidery scissors, chrome over nickel plated,
  packaged in hang bag with fitted leather sheath.
  
  
• One of Gingher's most popular items, the 4 inch classic embroidery scissors are chosen by sewing and needlework enthusiasts for their versatility. Their sharp points are useful for snipping threads and their slightly thicker
  frame lends the strength necessary for cutting yarns and lighter fabrics.

• 5" knife edge sewing scissors, chrome over nickel
  plated, packaged in hang bag with fitted leather sheath.
  
  
• The longer blades of these sewing scissors are more suitable for trimming layers of fabric. A popular item with quilters, these sewing scissors are capable of cutting through multiple layers of fabric because they have been ground with a knife edge. All knife edge scissors and shears can be sharpened using the G-S knife edge sharpening stone.

• 8" true left-hand knife edge dressmaker's shears, chrome over nickel plated, packaged in gift box with molded nylon sheath. Straight Blade - Left Handed Gingher® 8" Knife Edge Bent Dressmaker Shears Straight Blade Satin smooth blade has carefully polished points; designed for all dressmaking needs.
  
  
• True left hand shears provide true comfort and accurate cutting for left handers. These knife edge dressmaker's shears are capable of cutting through many thick layers of fabric and the knife edge can be sharpened with the G-S sharpening stone. Bent handles are angled for smooth and easy cutting on tabletop or counter. This is an indispensable tool for sewing, quilting and craftwork.

• 4 1/2" inch knife edge thread nippers, double-plated chrome over nickel, packaged in hangbag
  
  
• The knife edge model is capable of cutting through thick layers of fabric as well as heavier yarns. This model can be used for tasks such as clipping curves as well as cutting thread and yarn of all types. The index finger rests underneath the nippers while the thumb goes on top - the middle finger goes through the loop to stabilize the frame while index finger and thumb push blades together to peform the cutting action. Our quality craftsmanship assures sharp cutting all the way to the tips and a smooth, easy clipping action.
  
  See Videos on Gingher GG-TNKE 4 1/2 inch Knife Edge Thread Nippers

• 8" knife edge dressmaker's shears, chrome over nickel
  plated, packaged in gift box with molded nylon sheath.
  
  
• These 8 inch knife edge dressmaker's shears are Gingher's most popular product. An indispensable tool in sewing, crafts and quilting, these shears are ground with a knife edge which enables them to slice through many layers of fabric with ease. Handles are bent at an angle to provide even, comfortable cutting on tabletop or counter surfaces. Quality craftsmanship assures sharp, smooth cutting all the way to the points.
  
  
• The Gingher 8 inch Dressmaker Shears have a versatile longer length cut and blades strong enough to trim and cut multiple layers of fabric effortlessly. The longer cut is ideal for cutting out patterns and trimming seams. Gingher's precision ground knife edge cuts flawlessly all the way to the points. The bent handle allows for smooth comfortable cutting across a tabletop or counter. The scissors are finished in a handsome and durable, double-plated chrome over nickel finish. Use a G-S sharpening stone for blade maintenance.
  
  Gingher 8" Knife Edge Dressmaker Shears have blades strong enough to cut multiple layers of fabric effortlessly. The longer cut length is ideal for cutting out patterns and trimming seams. Gingher 8" Knife Edge Dressmaker Shears feature sharp precision knife edges which cut all the way to the points flawlessly. The bent handles on the Gingher 8" Knife Edge Dressmaker Shears allow for comfortable cutting on any flat surface. Crafted from durable double-plated chrome over nickel finish.

• Light And Compact
  
• 110 Volts
  
• Cloth Cutter
  
• Weighs 1 pound
  
• Color may vary
  
  Cuts up to 5 layers of fabric.
  
  This Gemsy CS-100 cutter does include a sharpening stone. You would attach the stone to the unit, and run the machine to sharpen the blade.
  
  

• 4" Diameter Rotary Cutting Blade
  
• Shoe Slides Between Table & Fabric
  
• Cuts Up To 15 Layers
  
• Lightweight And Compact
  
• 110 Volts
  
• Stand-Up Cloth Cutter

• 3 1/2 inch Rotary Cutting Blade
  
• Shoe Slides Between Table & Fabric
  
• Light And Compact
  
• Stand-Up Cloth Cutter

• Ergonomically soft handles, fatigue free cutting on all types of fabric
  
• Cuts multiple layers of denim with ease while trimming silks without any fabric slippage
  
• Standard size handle and blade length

• Ergonomically soft handles, fatigue free cutting on all types of fabric
  
• Cuts multiple layers of denim with ease while trimming silks without any fabric slippage
  
• Standard size handle and blade length

• Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
  
• Full-length "blade-to-grip" design for optimal cutting balance.
  
• Novel duplex interlock screw for lasting blade tension.
  
• Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
  
  Kai 7000 Series Product Brochure (.PDF)

• Full metal handle underneath Santoprene soft thermal ergonimic black handle insert for comfort.
  
• Permanent Soft Thermal Plastic Insert
  
• Made of high-carbon Molybdenum Vanadium, high carbon stainless steel for extra long edge light and high cutting efficiency.
  -Double-locking nuts for strength and tension
  -Lightweight for comfort cutting
  -Professionally diamond honed cutting edge
  -Larger handles to reduce stress on hands
  -Thicker blades for heavy duty cutting of materials
  
  
  
  
  Kai 7000 Series Product Brochure (.PDF)

• Full metal handle underneath Santoprene soft thermal ergonimic black handle insert for comfort.
  
• Permanent Soft Thermal Plastic Insert
  
• Made of high-carbon Molybdenum Vanadium, high carbon stainless steel for extra long edge light and high cutting efficiency.
  -Double-locking nuts for strength and tension
  -Lightweight for comfort cutting
  -Professionally diamond honed cutting edge
  -Larger handles to reduce stress on hands
  -Thicker blades for heavy duty cutting of materials
  
  
  Kai 7000 Series Product Brochure (.PDF)

• Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
  
• Full-length "blade-to-grip" design for optimal cutting balance.
  
• Novel duplex interlock screw for lasting blade tension.
  
• Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.
  
  Kai 7000 Series Product Brochure (.PDF)

• 60 Mm Blade
  
• This cutter features OLFA's new ergonomic design providing a comfortable and positive grip.
  
• Simply squeeze the handle to engage the blade.
  
• Dual-action safety lock allows the user to lock the blade open for comfort and closed for safety.
  
• The 60mm OLFA rotary cutter is specially designed to cut through multiple layers of fabric and difficult materials.
  
• Can be used for industrial applications.
  
• Accommodates both right- and left-handed users.
  
• Guaranteed Forever.

• 4 1/2 Precision Detail
  
• Nano Tip For Fine Intricate Cutting
  
• Razor Sharp For Effortless Cutting

• Hot drop-forged, polished blades with black handle.
  
• Patented set-easy pivot, easy hand adjustment.

• Hot drop-forged, polished blades with black handle.
  
• Patented set-easy pivot, easy hand adjustment.0

• Hot drop-forged, nickel plated blades with black handle.
  
• Patented set-easy pivot, easy adjustment.

• Suitable for mass trimming cotton, woolen, linen leather and chemical fiber goods, etc.
  
• Neat cutting, small-curvature radius curvilinear cutting.
  
• Low noise, stable running, easy to operate and high efficiency.
  
• Incorporated with an auto knife-grinding device, easier to operate.
  
  Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation

• Suitable for mass trimming cotton, woolen, linen leather and chemical fiber goods, etc.
  
• Neat cutting, small-curvature radius curvilinear cutting.
  
• Low noise, stable running, easy to operate and high efficiency.
  
• Incorporated with an auto knife-grinding device, easier to operate.
  
• 220/110 voltage
  
• 
  
  Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation

• Suitable for mass trimming cotton, woolen, linen leather and chemical fiber goods, etc.
  
• Neat cutting, small-curvature radius curvilinear cutting.
  
• Low noise, stable running, easy to operate and high efficiency.
  
• Incorporated with an auto knife-grinding device, easier to operate.
  
  How to adjust the Cutter Blade
  
  
  Please Note the blade length does not equal the amount of stacked material that can be cut. The cut depth will depend on the thickness, texture and density of the material you are using. If you are unsure if this cutter will suit your application please contact us to let us know the material that you are using, and we will be happy to offer our best recommendation

• Suitable for trimming cotton, woolen, linen leather and chemical fiber goods, etc.
  
• Neat cutting, small-curvature radius curvilinear cutting.
  
• Low noise, stable running, easy to operate and high efficiency.
  
• Circular cutting blade
  
• Built-in sharpening mechanism
  
• Extra-thin base plate
  
• High-power electric motor
  
• Carbide-tipped counter blade
  
  Best used for:
  
• Light to medium weight fabrics
  
• Woven or loosely knit fabric
  
  Suitable for trimming:
  • Cotton
  • Wool
  • Linen
  • Leather
  • Chemical fibre goods
  Features:
  • Neat cutting
  • Small-curvature radius curvillinear cutting
  • Low noise
  • Stable running
  • Easy to operate
  • High efficiency