• The LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves.
  This makes the machine ideal for the sewing of tubular articles.
  
  * With large vertical-axis hook
  * The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed
  * Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches
  * The ratio of alternate vertical movement remains unchanged even when the material thickness changes
  * Higher lift of the presser foot
  * The maximum alternating vertical movement is 6.5mm
  * Excellent operability and maintainability
  * The underside of the top end of the cylinder-bed is provided with an easy-to-remove cover. This promises easy cleaning of thread wastes
  * The stitch length can be easily selected by the stitch dial
  * The machine's enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel(160mm)
  * A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup
  * The machine's full-open-type top design makes adjusting works easier
  * The machine comes with a lubricating mechanism that uses a centralized oil wick
  * This substantially reduces the time and trouble required for oiling the machine. (The hook needs manual oiling with an oiler)
  * A walking foot mechanism is built into the machine arm to prevent oil from scattering
  * Complete with table stand and motor
  
  The underside of the top end of the cylinder-bed is provided with an easyto-
  remove cover. This promises easy cleaning of thread wastes.
  The stitch length can be easily selected by the stitch dial. The machine's
  enhanced operability features include a clear view of the area around the
  needle, placement of the bobbin thread winder on the front face of the
  machine arm, and a large handwheel(160mm).
  
  
• Thread range: #50-#8, B33-B92, Nm_120/3-30/3
  
• Distance from needle to neck 255mm
  
• Cylinder Bed Diameter 72mm
  
• Machine Weight 37.5 Kg

• 8-Needle Embroidery: With JUKI SAI, it is possible to embroider multi-color designs with few thread changes. With a structure that inherits the high performance of industrial embroidery machines, fine lines, and wide areas can also be beautifully embroidered.
  
• Exceptionally Fast: JUKI SAI can complete 800 stitches a minute while maintaining high-speed through various stitch lengths.
  
• Integrated Fonts: 6 fonts to create on-board lettering for text and monogram with the touch panel.
  
• Auto Thread Trimming: Auto thread trims in between jumps when changing colors, and at the end of a design for a clean design finish.
  
• Easy and Accurate Design Placement: The laser positioning system makes lining up your start point and tracing your design easier than ever before taking out the guesswork before you stitch.
  
• Thread Detection System: Detects any thread breakage in any of the 8 upper threads or an under thread during operation. The machine will automatically stop when thread breakage is detected.
  
• Easy to Operate Touch Panel: Even those new to the art of embroidery will quickly adapt to the 3 ½” x 6” full-color user-friendly touch panel when preparing the machine to embroider.
  
• Compact Design: Perfect fit for any home studio, small business specialty markets, or mobile embroidery business. Handles allow for easy lifting, portability, and tabletop readiness.
  
• Slim Cylinder Free Arm: A slim cylinder makes it possible to embroider on small objects. Socks, gloves, and pockets are no longer a struggle.
  
• Bright Workspace: Bright LED bulbs provide exceptional lighting to a 12” x 8” sewing field.
  
• Software Included: Includes Tajima Writer Plus, an auto digitizer design software for Windows with built-in design templates and easy LAN machine connection capability. PLEASE NOTEThe included software is not compatible with Mac operating systems. We apologize for any inconvenience.
  
• Design Away: More than 200 designs and 31 fonts pre-installed with an additional 1,000 embroidery designs by Pulse.
  
  WONDERFULLY BOLD, YET SUBTLE DESIGNS
  SAI's distinguishing silhouette was created by Toshiyuki Kita, the designer of the first-generation AQUOS that kicked off the history of LCD TVs. He came up with a color and design which fit effortlessly into various environments. For instance, if you run the machine in a location where it is visible from outside your shop, it gives the shop a sense of movement and inspires interest in passers-by.
  
  What's more, we added little twists here and there, such as arranging the thread cones vertically, to achieve the surprisingly compact form. In city centers, in particular, a shop is a valuable space not an inch of which can be wasted. It is a compact machine designed with consideration for your space as well.
  
  DELICATE YET SOLID - MECHANISM OF TRUST
  Tajima has a history of manufacturing embroidery machines for professional use. In developing SAI, we prioritized making sure it had the durability to earn customers' confidence, and making sure it can be used for many years.
  
  The basic mechanism follows the same engineering ideas as Tajima's flagship group of products, which have been successful around the world. For example, we adopted highly durable parts in motors and timing belts so that they endure long periods of use with ease. Besides this, we incorporated functionality that only a specialized manufacturer could, such as a tension indicator, laser marker, anti-dust finishing at the part-level and so on.
  
  Features
  8-NEEDLE EMBROIDERY
  With JUKI SAI, it is possible to embroider multi-color designs with few thread changes. With a structure that inherits the high performance of industrial embroidery machines, fine lines, and wide areas can also be beautifully embroidered.
  
  EXCEPTIONALLY FAST
  JUKI SAI can complete 800 stitches a minute while maintaining high-speed through various stitch lengths.
  
  INTEGRATED FONTS
  6 fonts to create on-board lettering for text and monogram with the touch panel.
  
  AUTO THREAD TRIMMING
  Auto thread trims in between jumps when changing colors, and at the end of a design for a clean design finish.
  
  EASY AND ACCURATE DESIGN PLACEMENT
  The laser positioning system makes lining up your start point and tracing your design easier than ever before taking out the guesswork before you stitch.
  
  THREAD DETECTION SYSTEM
  Detects any thread breakage in any of the 8 upper threads or an under thread during operation. The machine will automatically stop when thread breakage is detected.
  
  INTEGRATED FONTS
  6 fonts to create on-board lettering for text and monogram with the touch panel.
  
  EASY TO OPERATE TOUCH PANEL
  Even those new to the art of embroidery will quickly adapt to the 3 ½” x 6” full-color user-friendly touch panel when preparing the machine to embroider.
  
  COMPACT DESIGN
  Perfect fit for any home studio, small business specialty markets, or mobile embroidery business. Handles allow for easy lifting, portability, and tabletop readiness.
  
  SLIM CYLINDER FREE ARM
  A slim cylinder makes it possible to embroider on small objects. Socks, gloves, and pockets are no longer a struggle.
  
  BRIGHT WORKSPACE
  Bright LED bulbs provide exceptional lighting to a 12” x 8” sewing field.
  
  SOFTWARE INCLUDED
  Includes Tajima Writer Plus, a digitizer software for Windows with built-in design templates and easy LAN machine connection capability. This software is not compatible with Mac operating systems.
  
  DESIGN AWAY
  More than 200 designs and 31 fonts pre-installed with an additional 1,000 embroidery designs by Pulse.
  
  Personalize Your Spring Projects with Juki RICOH and Tajima
  
  
  
  
  JUKI Tajima Sai - Brief Overview: Features make the JUKI Tajima Sai Unique
  
  
  
  Watch videos on the JUKI Tajima SAI in this playlist below:
  
  
  
  
  
  
  
  
  
  Click here to access the Juki warranty statement and registration form.

• This machine stand measures 22"x22"x32"
  
• Stand on Wheels has been constructed exclusively for the PR600 and PR620, and measures 22" wide, 22" deep, and 32" tall
  
• Four 2 1/4" diameter adjustable foot pad stabilizers to reduce vibration.
  
• Has 4 heavy duty large rolling casters plus 4 more stabilizer feet, a total of 8 feet which reduce vibration.
  
• Has shelf underneath for extra hoop storage
  
• Perfect mobility for moving around the room or rolling into a building.
  
• Ships RTA Ready to Assemble
  
  Hoop Tech Stand Features:
  
• Easy to assemble
  
• All steel construction
  
• Rugged powder coat finish
  
• Large shelf area
  
• 2-Lock down brackets
  
• Easy rolling casters
  
• Leveling feet for stability
  
• Made in America
  
  

• Single Needle Lockstitch
  
• Uses Organ DBx1 Needles same as 16x231
  
• Up To 4500 Stitches Per Minute
  
• Fully Automatic Lubrication
  
• 1/2 Inch Foot Lift By Knee Lever
  
• 1/4 Inch Foot Lift by Hand Lever
  
• Maximum 5mm Stitch Length at the longest stitch length setting
  
• Minimum 6 Stitches Per Inch at the longest stitch length setting.
  
• Industrial Sewing Machine for apparel/interior fabrics, not upholstery

• Single Needle Lockstitch
  
• Uses Organ DBx1 Needles same as 16x231
  
• Up To 4500 Stitches Per Minute
  
• Fully Automatic Lubrication
  
• 1/2 Inch Foot Lift By Knee Lever
  
• 1/4 Inch Foot Lift by Hand Lever
  
• Maximum 5mm Stitch Length at the longest stitch length setting
  
• Minimum 6 Stitches Per Inch at the longest stitch length setting.
  
• Includes Table, Stand, And 1/2hp Motor
  
• Industrial Sewing Machine for apparel/interior fabrics, not upholstery
  
  Applications:
  • For sewing light to medium-weight materials including
  cotton, knits, polyester, nylon, sheer fabrics and denim.
  
  • Suitable for stitching such products as blouses, shirts,
  men's, ladies and children's apparel, uniforms, overalls,
  lingerie, etc.
  
  Features:
  • Sewing mechanism that demonstrates outstanding responsiveness to materials to be sewn.
  By thoroughly investigating and modifying the sewing mechanisms in order to achieve low-tension sewing, the machine flexibly responds to various kinds of materials and produces beautiful seams of consistent quality.
  
  • The machine has been designed for reduced vibration and noise and upgraded reliability and durability.
  By adopting a machine frame structure designed to obtain optimal balance and upgrade strength and rigidity, the machine runs with reduced vibration and noise.
  
  • The machine has easy-to-operate functions to achieve improved operability.
  By providing a presser foot with a higher lift (13mm), a light-touch stitch dial, and other easy-to-operate functions, the burden on the operator is lightened, and productivity is further increased.
  The hand pulley has been designed to contain a deep recess to allow the operator to hold the pulley firmly and turn it with ease.
  
  • The machine provided as standard with attachment mounting seats.
  The machine is provided as standard with extra attachment mounting seats for attachment of new auxiliary parts in the future. The extremely high durability of the seats ensures an extended service with frequent replacement of attachments.
  
  • The location of the hinge to prevent the sewing material from being caught by the hinge.
  The hinge is located as such so as to prevent the material from being caught by it, thereby improving workability.

• Brand: Juki
  
• Application: For light-medium weight materials
  
• Bed Size: 517mm x 178mm
  
• Feed Dog: 3-Row
  
• Hook: Automatic-lubricating full-rotary hook
  
• Max. Sewing Speed: 5500 rpm/spm
  
• Max. Stitch length: 5mm
  
• Thread take-up: Slide Type
  
• Needle System (at time of delivery): DB x 1(#14)#9
• #18 For JE:134(Nm90)
  
• Lubrication: Fully automatic lubrication system by means of plunger pump
  
• Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
  
• Lift of Presser Foot by Hand: 5.5 mm
  
• Lift of Presser Foot by Knee: 13 mm
  
• Weight of Machine Head: 75 LBS.
  
• Thread Material: Polyester
  
• Made In: Japan
  Bed Size is 7" x 18 25/32"
  
  Juki DDL-5550 Review
  
  

• Brand: Juki
  
• Application: For light-medium weight materials
  
• Bed Size: 517mm x 178mm
  
• Feed Dog: 3-Row
  
• Hook: Automatic-lubricating full-rotary hook
  
• Max. Sewing Speed: 5500spm (motor 3450RPM)
  
• Max. Stitch length: 5mm
  
• Thread take-up: Slide Type
  
• Needle System (at time of delivery): DB x 1(#14)#9
• #18 For JE:134(Nm90)
  
• Lubrication: Fully automatic lubrication system by means of plunger pump
  
• Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
  
• Lift of Presser Foot by Hand: 5.5 mm
  
• Lift of Presser Foot by Knee: 13 mm
  
• Weight of Machine Head: 75 LBS.
  
• Thread Material: Polyester
  
• Made In: Japan

• Brand: Juki
  
• Application: For light-medium weight materials
  
• Bed Size: 517mm x 178mm
  
• Feed Dog: 3-Row
  
• Hook: Automatic-lubricating full-rotary hook
  
• Max. Sewing Speed: 5500 rpm/spm
  
• Max. Stitch length: 5mm
  
• Thread take-up: Slide Type
  
• Needle System (at time of delivery): DB x 1(#14)#9
• #18 For JE:134(Nm90)
  
• Lubrication: Fully automatic lubrication system by means of plunger pump
  
• Lubricating Oil: Juki New Defrix Oil #2(Equivalent to ISO VG32)
  
• Lift of Presser Foot by Hand: 5.5 mm
  
• Lift of Presser Foot by Knee: 13 mm
  
• Weight of Machine Head: 75 LBS.
  
• Thread Material: Polyester
  
• Made In: Japan

• Single Needle Lockstitch
  
• Uses Organ DBx1 Needles same as 16x231
  
• Up To 5500 Stitches Per Minute
  
• Fully Automatic Lubrication
  
• 1/2 Inch Foot Lift By Knee Lever
  
• 1/4 Inch Foot Lift by Hand Lever
  
• Maximum 5mm Stitch Length at the longest stitch length setting
  
• Minimum 6 Stitches Per Inch at the longest stitch length setting.
  
• Industrial Sewing Machine for apparel/interior fabrics, not upholstery

• Servo Motor
  
• Single Needle Lockstitch
  
• Uses Organ DBx1 Needles same as 16x231
  
• Up To 5500 Stitches Per Minute
  
• Fully Automatic Lubrication
  
• 1/2 Inch Foot Lift By Knee Lever
  
• 1/4 Inch Foot Lift by Hand Lever
  
• Maximum 5mm Stitch Length at the longest stitch length setting
  
• Minimum 6 Stitches Per Inch at the longest stitch length setting.
  
• Includes Table, Stand, And 1/2hp Motor
  
• Industrial Sewing Machine for apparel/interior fabrics, not upholstery

• Single Needle Lockstitch
  
• Uses Organ DBx1 Needles same as 16x231
  
• Up To 5500 Stitches Per Minute
  
• Fully Automatic Lubrication
  
• 1/2 Inch Foot Lift By Knee Lever
  
• 1/4 Inch Foot Lift by Hand Lever
  
• Maximum 5mm Stitch Length at the longest stitch length setting
  
• Minimum 6 Stitches Per Inch at the longest stitch length setting.
  
• Industrial Sewing Machine for apparel and interior fabrics, not upholstery
  
• Includes Assembled Table, Plywood Top, Metal Stand, 1/2hp Clutch 110V Motor Installed
  

• DDL-8700-7/SC920C/M92
  
• 4,500-5,000 Max Sewing Speed
  
• 4.5mm Stitch Length
  
• Non Rotating Bobbin Device
  
• Automatic Thread Trimmer
  
• Automatic Backtack
  
• Automatic Foot Lift

• DDL-8700-7/SC920C/M92
  
• 4,500-5,000 Max Sewing Speed
  
• 4.5mm Stitch Length
  
• Non Rotating Bobbin Device
  
• Automatic Thread Trimmer
  
• Automatic Backtack
  
• Automatic Foot Lift

• #18 (Nm 65
• 110)
  
  DDL-9000C is the world's first sewing machine which comes with a digital drive mechanism and facilitates data transfer through NFC technology. This model allows for numerical entry of key settings through the operation panel meaning many manual adjustments are no longer needed. For the DDL -9000CS (digital type) adjustment of the feed dog height, feed pitch and feed locus have been digitalized and are programmable. For the DDL-9000CF (full-digital type), adjustment not only of those mentioned above but also the presser foot pressure and needle thread tension have been digitalized. With this digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machine internal memory, or externally, and can be reproduced with ease. For sewing plants which produce diversified products using different materials this feature is quite helpful to achieve stable seam quality without time wasted on manual adjustments.
  
  In today’s market many sewing plants have to handle dozens of kinds of materials. To get the best seams on any given product, maintenance experts and skilled operators must finely adjust sewing machines using tools such as a screwdriver or manual leavers and dials. Adjustment of all lockstitch machines in the plant requires an enormous amount of time and it is impossible to have the adjustment values perfectly reproduced across all machines.
  DDL-9000C Series not only substantially reduces setup time but also reproduces adjustments exactly, meaning the machine is ideally suited to the material being sewn. In addition, once the best-suited settings are stored in memory they can be translated to other machines via USB or NFC connection.
  
  Vertically and horizontally-driven digital feed mechanism
  Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease in accordance to the material being sewn. Thanks to this digital feed mechanism thread trimming is carried out with the feed dog lowered which results in a stable remaining thread length. Also because the feed dog does not protrude above the throat plate when the sewing machine stops it avoids the material from being damaged by the feed dog.
  
  Thread remaining on the material at the end of sewing as short as 3 mm
  As well as the lowered feed dog, the groove cam system and the picker device are adopted to allow forcible release of the thread trimmer even if it locks, thereby securing the appropriate needle thread length and achieving stable length of thread remaining on the material.
  
  Management, browsing and editing of data can be carried out via Android application
  Data on sewing machine adjustments can be transferred to an Android tablet or phone via the Juki Smart App via NFC or micro USB. This allows all settings to be calibrate once and then replicated across all machines on one sewing line. The operation panel is also provided with a USB port for data storage, transfer and management; software updates can be carried out with ease using a USB thumb drive.
  
  Custom functions can be programed to the hand switch
  The functions programed to the hand switches can be set through the operation panel. Since the reverse-feed stitching lever is provided as standard additional functions that will be needed the most can be set. 20 different functions (needle-up/down correction sewing, reverse-feed correction sewing, 1-time reverse-feed stitching cancellation function, etc.) can all be allocated to the hand switch. Highly convenient operation is ensured when functions that are used the most are easily accessible.
  
  Other Key Benefits for the DDL-9000C Include:
  
• Needle-thread active tension (full digital type)
  
• The presser foot pressure can be digitally controlled (full digital type)
  
• 4.3-inch large LCD touch panel (full digital type)
  
  Computer-controlled Vertically and Horizontally-Driven Feed Mechanism
  
  The world’s first feed mechanism which is driven both vertically and horizontally has been computerized. The feed mechanism changes its feed locus in accordance with the material. As a result, the optimum adjustments can be achieved only by setting data on the operation panel. Furthermore, the vertically-driven feed mechanism helps keep the length of the thread remaining on the material after thread trimming constant.
  
  Remaining thread at the end of sewing reduced to 3mm
  A both-blade driven rotary knife system is adopted. the knife intersects with the thread to trim it just beneath the needle entry point. Since the knife ensures constant length of needle thread, the length of thread remaining on the material after thread trimming is, unlike thread trimming with the thread tensed, also constant. The Juki DDL-9000CFMS inherits JUKI’s thread trimming technology to allow the thread trimmer to start up as soon as the pedal is depressed.
  
  Sewing Machine management utilizing “IoT” (Internet of Things)
  Data adjusted in a sample-making workshop etc. can be transferred without contact to the sewing machines in your factory using your tablet. (USB port is provided as standard)
  
  Commitment to “seam quality”is poised to enter a new era with JUKI ’s next-generation sewing system.
  
  
  The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.
  Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly
  suit the materials being sewn.
  
  Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this sewing machine, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Exampl e : Needle-thread active tension demonstrates its effectiveness in the top stitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
  
  Sewing specifications by garment or sewn product type
  
  JUKI - DDL-9000C Lockstitch Machine
  
  JUKI has launched its new direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer - the DDL-9000C. This is the newest flagship lockstitch machine from the world’s largest industrial sewing machine manufacturer. The machine has been digitalized to allow for easy adjustment of settings such as the feed mechanism, thread tension and the feed locus, all through the operation panel. Perfect parameters needed to achieve a high quality seams can be achieved digitally and key conditions do not need to be manually adjusted. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machines internal memory and can be reproduced with ease. For factories which produce diversified products using different materials, this feature is quite helpful to achieve stable seam quality in a time efficient manner.
  
  Direct-drive, high-speed, sewing system with automatic thread trimmer
  DDL-9000CSeries model comparison chart.

• Large Work Surface: The generous 12” wide throat space allows you to finish big projects with ease.
  
• Custom Switches: Two easily accessible switches (A and B) can be assigned for operations, for example, needle up and down or raising the presser foot.
  
• Independent Bobbin Winder: The QVP’s bobbin winder operates with an independent motor. Full capacity L size bobbins filled with your favorite thread ready to complete your project.
  
• One-Touch Switching to Free Motion Mode: The machine is equipped with a button for switching between straight stitch mode and free motion mode.
  
• Micro-Lifter Function: By inputting a negative value for the presser foot pressure, fabric can be sewn with the presser foot floating at a height of 0 to 4mm. This helps when sewing thick seams and reduces uneven feeding when quilting.
  
• Digitally Controlled LCD Panel: Adjust settings, for example, stitch length, thread tension, presser foot pressure with the touch of a button. Settings can be confirmed and specified from this large panel.
  
• Bobbin Thread Counter: With the count changing by one for every 10 stitches sewn, the counter can be used as a guide for when to replace the bobbin thread.
  
• Four Feed Operation Types: From the operation panel, you can select the appropriate feed operation for the item being sewn: standard for normal fabric, front up for thin fabric or knits, rear up for thick fabrics, and box feed for quilting.
  
• Adjustable LED Light: using an easily accessible switch, the brightness can be adjusted to one of five levels.
  
• Easily Insert and Remove Thick Fabrics: When the presser foot is raised, the feed dog is automatically lowered. In addition, the presser foot can be raised to a height of up to 13.5mm allowing thick fabrics to easily be inserted and removed.
  
• Maintenance-Free: Fill oil tank through the filler opening at the front of the sewing machine to ensure that the hook is automatically lubricated.
  
  JUKI has digitalized the drive mechanism of the sewing machine which determines the "seam" quality, JUKI launches the new "direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer" DDL-9000CF.This is the newest flagship lockstitch machine. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed focus only on the operation panel according to the material to be sewn.Thanks to the digitalization, Optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
  
  This is the newest flagship, fully digital type direct-drive, high-speed, lockstitch machine with an automatic thread trimmer. Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored, on a material-by-material basis, in memory and can be reproduced with ease. For sewing plants which produce diversified products using diversified materials, this feature is quite helpful to achieve stable seam quality.
  
  • Application: medium-weight materials
  • Lubrication: semi-dry
  • Max. sewing speed: 5000 st / min
  • Max. stitch length: 5 mm
  • Lift of the presser foot: by hand: 5.5 mm, by knee: 15 mm, auto: (1st stage) 5.0 mm (0.1～8.5 mm), (2nd stage) 8.5 mm (8.5～13.5 mm)
  • Standard needle: DBx1 - DBx5 (#11) #9
• #18 (Nm 65
• 110)
  
  DDL-9000C is the world's first sewing machine which comes with a digital drive mechanism and facilitates data transfer through NFC technology. This model allows for numerical entry of key settings through the operation panel meaning many manual adjustments are no longer needed. For the DDL -9000CS (digital type) adjustment of the feed dog height, feed pitch and feed locus have been digitalized and are programmable. For the DDL-9000CF (full-digital type), adjustment not only of those mentioned above but also the presser foot pressure and needle thread tension have been digitalized. With this digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machine internal memory, or externally, and can be reproduced with ease. For sewing plants which produce diversified products using different materials this feature is quite helpful to achieve stable seam quality without time wasted on manual adjustments.
  
  In today’s market many sewing plants have to handle dozens of kinds of materials. To get the best seams on any given product, maintenance experts and skilled operators must finely adjust sewing machines using tools such as a screwdriver or manual leavers and dials. Adjustment of all lockstitch machines in the plant requires an enormous amount of time and it is impossible to have the adjustment values perfectly reproduced across all machines.
  DDL-9000C Series not only substantially reduces setup time but also reproduces adjustments exactly, meaning the machine is ideally suited to the material being sewn. In addition, once the best-suited settings are stored in memory they can be translated to other machines via USB or NFC connection.
  
  Vertically and horizontally-driven digital feed mechanism
  Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease in accordance to the material being sewn. Thanks to this digital feed mechanism thread trimming is carried out with the feed dog lowered which results in a stable remaining thread length. Also because the feed dog does not protrude above the throat plate when the sewing machine stops it avoids the material from being damaged by the feed dog.
  
  Thread remaining on the material at the end of sewing as short as 3 mm
  As well as the lowered feed dog, the groove cam system and the picker device are adopted to allow forcible release of the thread trimmer even if it locks, thereby securing the appropriate needle thread length and achieving stable length of thread remaining on the material.
  
  Management, browsing and editing of data can be carried out via Android application
  Data on sewing machine adjustments can be transferred to an Android tablet or phone via the Juki Smart App via NFC or micro USB. This allows all settings to be calibrate once and then replicated across all machines on one sewing line. The operation panel is also provided with a USB port for data storage, transfer and management; software updates can be carried out with ease using a USB thumb drive.
  
  Custom functions can be programed to the hand switch
  The functions programed to the hand switches can be set through the operation panel. Since the reverse-feed stitching lever is provided as standard additional functions that will be needed the most can be set. 20 different functions (needle-up/down correction sewing, reverse-feed correction sewing, 1-time reverse-feed stitching cancellation function, etc.) can all be allocated to the hand switch. Highly convenient operation is ensured when functions that are used the most are easily accessible.
  
  Other Key Benefits for the DDL-9000C Include:
  
• Needle-thread active tension (full digital type)
  
• The presser foot pressure can be digitally controlled (full digital type)
  
• 4.3-inch large LCD touch panel (full digital type)
  
  Computer-controlled Vertically and Horizontally-Driven Feed Mechanism
  
  The world’s first feed mechanism which is driven both vertically and horizontally has been computerized. The feed mechanism changes its feed locus in accordance with the material. As a result, the optimum adjustments can be achieved only by setting data on the operation panel. Furthermore, the vertically-driven feed mechanism helps keep the length of the thread remaining on the material after thread trimming constant.
  
  Remaining thread at the end of sewing reduced to 3mm
  A both-blade driven rotary knife system is adopted. the knife intersects with the thread to trim it just beneath the needle entry point. Since the knife ensures constant length of needle thread, the length of thread remaining on the material after thread trimming is, unlike thread trimming with the thread tensed, also constant. The Juki DDL-9000CFMS inherits JUKI’s thread trimming technology to allow the thread trimmer to start up as soon as the pedal is depressed.
  
  Sewing Machine management utilizing “IoT” (Internet of Things)
  Data adjusted in a sample-making workshop etc. can be transferred without contact to the sewing machines in your factory using your tablet. (USB port is provided as standard)
  
  Commitment to “seam quality”is poised to enter a new era with JUKI ’s next-generation sewing system.
  
  
  The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.
  Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly
  suit the materials being sewn.
  
  Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this sewing machine, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Exampl e : Needle-thread active tension demonstrates its effectiveness in the top stitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
  
  Sewing specifications by garment or sewn product type
  
  JUKI - DDL-9000C Lockstitch Machine
  
  JUKI has launched its new direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer - the DDL-9000C. This is the newest flagship lockstitch machine from the world’s largest industrial sewing machine manufacturer. The machine has been digitalized to allow for easy adjustment of settings such as the feed mechanism, thread tension and the feed locus, all through the operation panel. Perfect parameters needed to achieve a high quality seams can be achieved digitally and key conditions do not need to be manually adjusted. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machines internal memory and can be reproduced with ease. For factories which produce diversified products using different materials, this feature is quite helpful to achieve stable seam quality in a time efficient manner.
  
  Direct-drive, high-speed, sewing system with automatic thread trimmer
  DDL-9000CSeries model comparison chart.
  
  Click here to access the Juki warranty registration form
  
  JUKI J-150QVP - Chapter 7: Free Motion Sewing including with Rulers
  
  
  
  Tutorial: Sewing with an Industrial Juki DDL 9000 Sewing Machine by TomKat Stitchery
  

• #18 (Nm 65
• 110)
  
  DDL-9000C is the world's first sewing machine which comes with a digital drive mechanism and facilitates data transfer through NFC technology. This model allows for numerical entry of key settings through the operation panel meaning many manual adjustments are no longer needed. For the DDL -9000CS (digital type) adjustment of the feed dog height, feed pitch and feed locus have been digitalized and are programmable. For the DDL-9000CF (full-digital type), adjustment not only of those mentioned above but also the presser foot pressure and needle thread tension have been digitalized. With this digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machine internal memory, or externally, and can be reproduced with ease. For sewing plants which produce diversified products using different materials this feature is quite helpful to achieve stable seam quality without time wasted on manual adjustments.
  
  In today’s market many sewing plants have to handle dozens of kinds of materials. To get the best seams on any given product, maintenance experts and skilled operators must finely adjust sewing machines using tools such as a screwdriver or manual leavers and dials. Adjustment of all lockstitch machines in the plant requires an enormous amount of time and it is impossible to have the adjustment values perfectly reproduced across all machines.
  DDL-9000C Series not only substantially reduces setup time but also reproduces adjustments exactly, meaning the machine is ideally suited to the material being sewn. In addition, once the best-suited settings are stored in memory they can be translated to other machines via USB or NFC connection.
  
  Vertically and horizontally-driven digital feed mechanism
  Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease in accordance to the material being sewn. Thanks to this digital feed mechanism thread trimming is carried out with the feed dog lowered which results in a stable remaining thread length. Also because the feed dog does not protrude above the throat plate when the sewing machine stops it avoids the material from being damaged by the feed dog.
  
  Thread remaining on the material at the end of sewing as short as 3 mm
  As well as the lowered feed dog, the groove cam system and the picker device are adopted to allow forcible release of the thread trimmer even if it locks, thereby securing the appropriate needle thread length and achieving stable length of thread remaining on the material.
  
  Management, browsing and editing of data can be carried out via Android application
  Data on sewing machine adjustments can be transferred to an Android tablet or phone via the Juki Smart App via NFC or micro USB. This allows all settings to be calibrate once and then replicated across all machines on one sewing line. The operation panel is also provided with a USB port for data storage, transfer and management; software updates can be carried out with ease using a USB thumb drive.
  
  Custom functions can be programed to the hand switch
  The functions programed to the hand switches can be set through the operation panel. Since the reverse-feed stitching lever is provided as standard additional functions that will be needed the most can be set. 20 different functions (needle-up/down correction sewing, reverse-feed correction sewing, 1-time reverse-feed stitching cancellation function, etc.) can all be allocated to the hand switch. Highly convenient operation is ensured when functions that are used the most are easily accessible.
  
  Other Key Benefits for the DDL-9000C Include:
  
• Needle-thread active tension (full digital type)
  
• The presser foot pressure can be digitally controlled (full digital type)
  
• 4.3-inch large LCD touch panel (full digital type)
  
  Computer-controlled Vertically and Horizontally-Driven Feed Mechanism
  
  The world’s first feed mechanism which is driven both vertically and horizontally has been computerized. The feed mechanism changes its feed locus in accordance with the material. As a result, the optimum adjustments can be achieved only by setting data on the operation panel. Furthermore, the vertically-driven feed mechanism helps keep the length of the thread remaining on the material after thread trimming constant.
  
  Remaining thread at the end of sewing reduced to 3mm
  A both-blade driven rotary knife system is adopted. the knife intersects with the thread to trim it just beneath the needle entry point. Since the knife ensures constant length of needle thread, the length of thread remaining on the material after thread trimming is, unlike thread trimming with the thread tensed, also constant. The Juki DDL-9000CFMS inherits JUKI’s thread trimming technology to allow the thread trimmer to start up as soon as the pedal is depressed.
  
  Sewing Machine management utilizing “IoT” (Internet of Things)
  Data adjusted in a sample-making workshop etc. can be transferred without contact to the sewing machines in your factory using your tablet. (USB port is provided as standard)
  
  Commitment to “seam quality”is poised to enter a new era with JUKI ’s next-generation sewing system.
  
  The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.
  Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly
  suit the materials being sewn.
  
  Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this sewing machine, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Exampl e : Needle-thread active tension demonstrates its effectiveness in the top stitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
  
  Sewing specifications by garment or sewn product type
  
  JUKI - DDL-9000C Lockstitch Machine
  
  JUKI has launched its new direct-drive, high-speed, lockstitch sewing system with automatic thread trimmer - the DDL-9000C. This is the newest flagship lockstitch machine from the world’s largest industrial sewing machine manufacturer. The machine has been digitalized to allow for easy adjustment of settings such as the feed mechanism, thread tension and the feed locus, all through the operation panel. Perfect parameters needed to achieve a high quality seams can be achieved digitally and key conditions do not need to be manually adjusted. Thanks to the digitalization, optimum adjustment values required to produce high-quality seams can be stored on a material-by-material basis in the machines internal memory and can be reproduced with ease. For factories which produce diversified products using different materials, this feature is quite helpful to achieve stable seam quality in a time efficient manner.
  
  Direct-drive, high-speed, sewing system with automatic thread trimmer
  DDL-9000CSeries model comparison chart.
  

• Single Needle Lockstitch Sewing Machine
  
• Automatic Thread Trimming
  
• Semi Lubricating Full Rotary Hook
  
• High Presser Foot
  
• Push Type Reverse Switch
  
• Horizontal Thread Trimming System
  
• Maximum 4.5mm Stitch Length
  
• Easy Access Maintenance Capabilities
  
• Uses Organ DBx1 Needles same as 16x231
  
• MS – Semi-dry head type for Medium-Weight application
  
• WB – Wiper Provided
  
• AK141 – Auto Lifter Provided
  
• S – Single Phase 100-120V
  
  Juki DDL9000B Direct-drive, High-speed, 1-needle Lockstitch Machine with Automatic Thread Trimmer
  
  The Juki DDL-9000B Series is the premier 1-needle lockstitch machine with respect to functions, performance and design. This 1-needle lockstitch machine is JUKI's highly advanced model provided with a thread trimmer which operates at the highest speed of its kind, a mechanism which promises silent operation and advanced power saving features. This cutting-edge machine is a successor model of the DDL-9000 and DDL-9000A.
  
  All of the three DDL-9000B series machine head types are friendly to the environment since they prevent oil stains and minimize the quantity of stain remover used. Select one of the three machine heads according to your sewing applications.
  
  The DDL-9000B has adopted the latest compact-size servomotor as its driving source. This latest compact-size servomotor is an energy-saving, highly efficient motor which is able to run under a high torque and has a broader range of speed. In addition, the servomotor is installed with a direct-drive system to transmit the motor power directly to the sewing machine, thereby achieving improved power-consumption saving, quicker response, quicker startup, increased accuracy of the stop position and stronger material penetrating force of the needle.
  
  The newly-developed model totally eliminates "bird's nests at the starting of sewing", which have been a conventionally inevitable factor when using machines with a thread trimmer. The length of thread remaining at the end of sewing is shortened. With these two capabilities, the machine demonstrates its improved performance in the sewing of parts in which the starting and end points of a seam are visible, such as in the case of sewing name labels, topstitching and counterstitching collar bottoms.
  
  {Q} Re: Message: Can you lower the feed dogs on the (Juki) 9000c for free motion quilting? NO
  {A} No free motion on the Juki 9000 series, but yes on the Juki J-150 that we have in stock below*: I don't know of any other industrial machine brand or model that has this feature! John
  "One-Touch Switching to Free Motion Mode: The machine is equipped with a button for switching between straight stitch mode and free motion mode (feed dogs drop automatically)

• Single Needle Lockstitch Sewing Machine
  
• Automatic Thread Trimming
  
• Semi Lubricating Full Rotary Hook
  
• High Presser Foot
  
• Push Type Reverse Switch
  
• Horizontal Thread Trimming System
  
• Maximum 4.5mm Stitch Length
  
• Easy Access Maintenance Capabilities
  
• Uses Organ DBx1 Needles same as 16x231
  
• MS – Semi-dry head type for Medium-Weight application
  
• WB – Wiper Provided
  
• AK141 – Auto Lifter Provided
  
• S – Single Phase 100-120V
  
  Juki DDL9000B Direct-drive, High-speed, 1-needle Lockstitch Machine with Automatic Thread Trimmer
  
  The Juki DDL-9000B Series is the premier 1-needle lockstitch machine with respect to functions, performance and design. This 1-needle lockstitch machine is JUKI's highly advanced model provided with a thread trimmer which operates at the highest speed of its kind, a mechanism which promises silent operation and advanced power saving features. This cutting-edge machine is a successor model of the DDL-9000 and DDL-9000A.
  
  All of the three DDL-9000B series machine head types are friendly to the environment since they prevent oil stains and minimize the quantity of stain remover used. Select one of the three machine heads according to your sewing applications.
  
  The DDL-9000B has adopted the latest compact-size servomotor as its driving source. This latest compact-size servomotor is an energy-saving, highly efficient motor which is able to run under a high torque and has a broader range of speed. In addition, the servomotor is installed with a direct-drive system to transmit the motor power directly to the sewing machine, thereby achieving improved power-consumption saving, quicker response, quicker startup, increased accuracy of the stop position and stronger material penetrating force of the needle.
  
  The newly-developed model totally eliminates "bird's nests at the starting of sewing", which have been a conventionally inevitable factor when using machines with a thread trimmer. The length of thread remaining at the end of sewing is shortened. With these two capabilities, the machine demonstrates its improved performance in the sewing of parts in which the starting and end points of a seam are visible, such as in the case of sewing name labels, topstitching and counterstitching collar bottoms.
  
  {Q} Re: Message: Can you lower the feed dogs on the (Juki) 9000c for free motion quilting? NO
  {A} No free motion on the Juki 9000 series, but yes on the Juki J-150 that we have in stock below*: I don't know of any other industrial machine brand or model that has this feature! John
  "One-Touch Switching to Free Motion Mode: The machine is equipped with a button for switching between straight stitch mode and free motion mode (feed dogs drop automatically)

• Single Needle Lockstitch Sewing Machine
  
• Automatic Thread Trimming
  
• Semi Lubricating Full Rotary Hook
  
• High Presser Foot
  
• Push Type Reverse Switch
  
• Horizontal Thread Trimming System
  
• Maximum 4.5mm Stitch Length
  
• Easy Access Maintenance Capabilities
  
• Uses Organ DBx1 Needles same as 16x231
  
• MS – Semi-dry head type for Medium-Weight application
  
• WB – Wiper Provided
  
• AK141 – Auto Lifter Provided
  
• S – Single Phase 100-120V
  
  Juki DDL-9000CS-M Direct-drive, High-speed, 1-needle Lockstitch Machine with Automatic Thread Trimmer
  
  Juki DDL-9000CS-M Series is the premier 1-needle lockstitch machine with respect to functions, performance and design. This 1-needle lockstitch machine is JUKI's highly advanced model provided with a thread trimmer which operates at the highest speed of its kind, a mechanism which promises silent operation and advanced power saving features. This cutting-edge machine is a successor model of the DDL-9000 and DDL-9000A.
  
  All of the three Juki DDL-9000CS-M series machine head types are friendly to the environment since they prevent oil stains and minimize the quantity of stain remover used. Select one of the three machine heads according to your sewing applications.
  
  The DDL-9000CS-M has adopted the latest compact-size servomotor as its driving source. This latest compact-size servomotor is an energy-saving, highly efficient motor which is able to run under a high torque and has a broader range of speed. In addition, the servomotor is installed with a direct-drive system to transmit the motor power directly to the sewing machine, thereby achieving improved power-consumption saving, quicker response, quicker startup, increased accuracy of the stop position and stronger material penetrating force of the needle.
  
  The newly-developed model totally eliminates "bird's nests at the starting of sewing", which have been a conventionally inevitable factor when using machines with a thread trimmer. The length of thread remaining at the end of sewing is shortened. With these two capabilities, the machine demonstrates its improved performance in the sewing of parts in which the starting and end points of a seam are visible, such as in the case of sewing name labels, topstitching and counterstitching collar bottoms.
  
  Direct-drive, high-speed, sewing system with automatic thread trimmer
  DDL-9000CSeries model comparison chart.
  
  

• Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm
  
• The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
  
• Gauges and devices you have used with your existing JUKI machines are also interchangeable with no additional machining. This eliminates both the waste of resources and unwanted extra costs.
  
• This model available to be set up as exclusive and dedicated narrow rolled hem machine, Juki MO6704-150
  
  Click HERE for Complete Color Brochure on Juki MO6700 Series Models MO6704 through MO6743
  
  Click HERE for Brochure on Juki MO6700 Series Sergers MO6704, MO6714, MO6716
  
  Click HERE for Parts List on Juki MO6704, MO6714, MO6716
  
  
  
  
  
  
  
  User Video on How to Thread and Start Sewing on the Juki MO6700 Serger using MO6716.

• Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to medium-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm
  
  
• The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
  
  
• Gauges and devices you have used with your existing JUKI machines are also interchangeable with no additional machining. This eliminates both the waste of resources and unwanted extra costs.
  
  Includes power stand
  
  Click HERE for Complete Color Brochure on Juki MO6700 Series Models MO6704 through MO6743
  
  Click HERE for Brochure on Juki MO6700 Series Sergers MO6704, MO6714, MO6716
  
  Click HERE for Parts List on Juki MO6704, MO6714, MO6716
  
  
  
  
  

• Model name: MO-6714S
  
• Stitch type: 2-needle overlock Safety stitching
  
• Stitch style in the U.S.A.: 514
  
• Max. sewing speed: 7,000rpm
  
• Stitch length: 0.8
• 4mm 1.5
• 4mm
  
• Needle gauge (mm): 2.0, 2.4, 3.2 2.0, 3.2, 4.0, 4.8,
  4.8+2.0
  
• Overedging width (mm): 1.6, 3.2, 4.0, 4.8 3.2, 4.0, 4.8 3.2, 4.0, 4.8, 6.4
  
• Differential feed ratio:
  -For gathering 1:2(Max. 1:4)
  -For stretching 1:0.7(Max. 1:0.6)
  
• Needle bar stroke: 24.5mm
  
• Inclination angle of the needle: 20°
  
• Needle mechanism: Needle bar method and upper/lower bushing
  
• Needle: DC27(excluding some subclass model)
  
• Max. lift of the presser foot: 7mm(excluding some subclass model)
  
• Max. presser foot pressure: 63.7N (6.5kg)
  
• Stitch adjusting method: By push-button
  
• Differential-feed adjusting method: By lever (with micro-adjustment)
  
• Weight of the machine head: 28kg
  
• Lubrication: Automatic
  
• Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
  
• Micro-lifter: Provided as standard
  
• Ships Freight within the USA includes fully assembled table, stand, and motor.
  
  Click HERE for Complete Color Brochure on Juki MO6700 Series Models MO6704 through MO6743
  
  Click HERE for Brochure on Juki MO6700 Series Sergers MO6704, MO6714, MO6716
  
  Click HERE for Parts List on Juki MO6704, MO6714, MO6716
  
  

The Juki MO-6700S Series is a new and powerful overlock/safety stitch machine that has been developed to offer increased reliability and ease-of-use, while upgrading seam quality at higher sewing speeds. It responds to a wider range of materials and processes to finish high-quality soft-feeling seams.

With the operating noise having been reduced and increased durability ensured, the cost-effective MO-6716S is a leading machine in the new era.

More Juki MO-6716S Features:

• Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm.
  
  

• The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
  
  

• The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used.
  
  

• Comfortable operation is all but guaranteed, by a wider area around the needle entry, the adoption as standard of a micro-lifter feature that offers improved responsiveness to materials and provides the operator with upgraded operability, and by the reduction of operating noise and vibration, which has been achieved by designing an optimally balanced machine.
  
  Click HERE for Complete Color Brochure on Juki MO6700 Series Models MO6704 through MO6743
  
  Click HERE for Brochure on Juki MO6700 Series Sergers MO6704, MO6714, MO6716
  
  Click HERE for Parts List on Juki MO6704, MO6714, MO6716
  
  

  
  
  Sew All You Tube Videos on Juki MO6716 Overlock and Safety Stitch Serger Machines

• Model name: MO-6804S
  
• Stitch type: 1-needle overlock stitching
  
• Stitch style in the U.S.A.: 514
  
• Max. sewing speed: 7,000sti/min
  
• Stitch length: 0.6-3.8 (4.5) mm
  
• Needle gauge (mm): 2.0mm
  
• Overedging width (mm): 4.0, and 6.0
  
  
• Differential feed ratio:
  -For gathering 1:2(Max. 1:4)
  -For stretching 1:0.7(Max. 1:0.6)
  
• Needle bar stroke: 24.5mm
  
• Inclination angle of the needle: 20°
  
• Needle mechanism: Needle bar method and upper/lower bushing
  
• Needle: DC27(excluding some subclass model)
  
• Max. lift of the presser foot: 7mm(excluding some subclass model)
  
• Max. presser foot pressure: 63.7N (6.5kg)
  
• Stitch adjusting method: By push-button
  
• Differential-feed adjusting method: By lever (with micro-adjustment)
  
• Weight of the machine head: 28kg
  
• Lubrication: Automatic
  
• Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
  
• Micro-lifter: Provided as standard
  
• Ships Freight within the USA includes fully assembled table, stand, and motor.
  
  Click HERE for Complete Color Brochure on Juki MO6800 Series Models for MO6804, MO6814, MO6816, through MO6843
  
  Click HERE for Brochure on Juki MO6800 Series Sergers MO6804, MO6814, MO6816
  
  Click HERE for Parts List on Juki MO6804, MO6814, MO6816
  
  

The Juki MO-6700S Series is a new and powerful overlock/safety stitch machine that has been developed to offer increased reliability and ease-of-use, while upgrading seam quality at higher sewing speeds. It responds to a wider range of materials and processes to finish high-quality soft-feeling seams.

With the operating noise having been reduced and increased durability ensured, the cost-effective MO-6816S is a leading machine in the new era.

More Juki MO-6816S Features:

• Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm.
  
  

• The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
  
  

• The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used.
  
  

• Comfortable operation is all but guaranteed, by a wider area around the needle entry, the adoption as standard of a micro-lifter feature that offers improved responsiveness to materials and provides the operator with upgraded operability, and by the reduction of operating noise and vibration, which has been achieved by designing an optimally balanced machine.
  
  Click HERE for Complete Color Brochure on Juki MO6800 Series Models MO6804, MO6814, MO6816, through MO6843. Not all models are stocked in USA.
  
  Click HERE for Partial Brochure on Juki MO6800 Series Sergers MO6804, MO6814, MO6816. Not all models are stocked in USA.
  
  Click HERE for Parts List on Juki MO6804, MO6814, MO6816
  
  

  
  
  Sew All You Tube Videos on Juki MO6817, MO6716 Overlock and Safety Stitch Serger Machines

• Model name: MO-6814S
  
• Stitch type: 2-needle overlock Safety stitching
  
• Stitch style in the U.S.A.: 514
  
• Max. sewing speed: 7,000sti/min
  
• Stitch length: 0.6-3.8 (4.5) mm
  
• Needle gauge (mm): 2.0
  
• Overedging width (mm):
  
  
• Differential feed ratio:
  -For gathering 1:2(Max. 1:4)
  -For stretching 1:0.7(Max. 1:0.6)
  
• Needle bar stroke: 24.5mm
  
• Inclination angle of the needle: 20°
  
• Needle mechanism: Needle bar method and upper/lower bushing
  
• Needle: DC27(excluding some subclass model)
  
• Max. lift of the presser foot: 7mm(excluding some subclass model)
  
• Max. presser foot pressure: 63.7N (6.5kg)
  
• Stitch adjusting method: By push-button
  
• Differential-feed adjusting method: By lever (with micro-adjustment)
  
• Weight of the machine head: 28kg
  
• Lubrication: Automatic
  
• Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
  
• Micro-lifter: Provided as standard
  
• Ships Freight within the USA includes fully assembled table, stand, and motor.
  
  Click HERE for Complete Color Brochure on Juki MO6800 Series Models MO6804, MO6814, MO6816, through MO6843
  
  Click HERE for Brochure on Juki MO6800 Series Sergers MO6804, MO6814, MO6816
  
  Click HERE for Parts List on Juki MO6804, MO6814, MO6816
  
  

• Model name: MO-6814S
  
• Stitch type: 2-needle overlock Safety stitching
  
• Stitch style in the U.S.A.: 514
  
• Max. sewing speed: 7,000sti/min
  
• Stitch length: 0.6-3.8 (4.5) mm
  
• Needle gauge (mm): 2.0mm
  
• Overedging width (mm): 4.0, and 6.0
  
  
• Differential feed ratio:
  -For gathering 1:2(Max. 1:4)
  -For stretching 1:0.7(Max. 1:0.6)
  
• Needle bar stroke: 24.5mm
  
• Inclination angle of the needle: 20°
  
• Needle mechanism: Needle bar method and upper/lower bushing
  
• Needle: DC27(excluding some subclass model)
  
• Max. lift of the presser foot: 7mm(excluding some subclass model)
  
• Max. presser foot pressure: 63.7N (6.5kg)
  
• Stitch adjusting method: By push-button
  
• Differential-feed adjusting method: By lever (with micro-adjustment)
  
• Weight of the machine head: 28kg
  
• Lubrication: Automatic
  
• Lubricating oil: JUKI Machine Oil 18 (equivalent to ISO VG18)
  
• Micro-lifter: Provided as standard
  
• Ships Freight within the USA includes submerged table, stand, and motor.
  
  Click HERE for Complete Color Brochure on Juki MO6800 Series Models for MO6804, MO6814, MO6816, through MO6843
  
  Click HERE for Brochure on Juki MO6800 Series Sergers MO6804, MO6814, MO6816
  
  Click HERE for Parts List on Juki MO6804, MO6814, MO6816
  
  

The Juki MO-6800S Series is a new and powerful overlock/safety stitch machine that has been developed to offer increased reliability and ease-of-use, while upgrading seam quality at higher sewing speeds. It responds to a wider range of materials and processes to finish high-quality soft-feeling seams.

With the operating noise having been reduced and increased durability ensured, the cost-effective MO-6816S is a leading machine in the new era.

More Juki MO-6816S Features:

• Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm.
  
  

• The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
  
  

• The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used.
  
  

• Comfortable operation is all but guaranteed, by a wider area around the needle entry, the adoption as standard of a micro-lifter feature that offers improved responsiveness to materials and provides the operator with upgraded operability, and by the reduction of operating noise and vibration, which has been achieved by designing an optimally balanced machine.
  
  
  

• Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 8,000rpm
  
• The newly adopted upper and lower needle bar bushings of the needle bar mechanism improve both the durability and reliability of the needle bar unit. The machine comes standard with a cartridge type oil filter and cooling fan for further improved reliability and durability.
  
• Gauges and devices you have used with your existing JUKI machines are also interchangeable with no additional machining. This eliminates both the waste of resources and unwanted extra costs.
  
• See Optional Juki MO6704-150 1.6mm Dedicated Rolled Hem Merrow Stitch Edge, Industrial Overlock 3-Thread Serger MO-6704-150, 4:1 Differential Feed, Power Stand 7000SPM, 100 Needles. This model available to be set up as exclusive and dedicated narrow rolled hem machine, Juki MO6704-150.
  
  The machine ensures both beautiful and upgraded seam quality at higher speeds.
  Since the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer
  upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft feeling
  seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 8,000 to 8,500sti/min.
  To offer improved sewing capabilities as well as to prevent stitching misshapes, the machine is equipped as standard with
  the needle thread heat remover and needle cooler.
  
  The machine has been developed with the intention of providing an extended service life.
  The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and
  an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio,
  which can be easily adjusted to finish seams that perfectly match the material to be used. Comfortable operation is all
  but guaranteed, by a wider area around the needle entry, the adoption as standard of a micro-lifter feature that offers
  improved responsiveness to materials and provides the operator with upgraded operability, and by the reduction of
  operating noise and vibration, which has been achieved by designing an optimally balanced machine.
  
  Further increased reliability.
  The introduction of a shield-structured needle bar
  mechanism and upper and lower needle bar bushings,
  contributes to increased durability and reliability.
  Additionally, the machine incorporates an improved
  feed mechanism and upper looper unit as well as
  coming standard with a cartridge type oil filter and
  cooling fan, thereby ensuring enhanced reliability.
  
  Devices intended for conventional JUKI machines are also interchangeable.
  Gauges and devices you have used with your existing
  JUKI machines are also interchangeable with no
  additional machining required (excluding the LB
  Series). This eliminates both the waste of resources
  and unwanted extra costs.

• The machine securely clamps the material at the beginning of sewing as well as smoothly sewing multi-layered parts of the material to facilitate the sewing of extra heavy-weight materials
  
  
• Comes with a newly-developed feed mechanism that moves the top and bottom feeds separately. With its improved feeding capacity and stronger cloth-biting force, the feed mechanism prevents uneven material feed when sewing extra heavy-weight materials
  
  
• The machine incorporates mechanisms that are both durable and reliable, such as the needle bar mechanism, utilizing the upper and lower bushings, a cartridge type oil filter and cooling fan
  
  
• The machine is equipped as standard with a micro-lifter that helps reduce operator fatigue. The micro-lifter is designed to achieve optimum balance, not only reducing noise and vibration but also ensuring comfortable operation
  
  
• Needle thread heat remover and needle cooler prevent stitching troubles during times of high-speed sewing, thereby contributing to upgraded seam quality.
  
  
• The machine comes standard with various adjusting mechanisms, such as a micro-adjusting mechanism, all of which can be easily adjusted to enable the machine to perform sewing under the best-suited conditions for any kind of material.
  
  
• Complete with table stand and motor

• Single Needle
  
• Compound Needle Feed And Walking Foot
  
• Speed up to 3000 Stitches Per Minute
  
• 9 Mm Stitch Length
  
• Industrial Upholstery Machine

• Single Needle
  
• Needle Feed And Walking Foot
  
• Up to 2500 Stitches Per Minute
  
• Up to 9 Mm Stitch Length
  
• Industrial Upholstery Machine
  
• Safety Clutch Button right of needle plate for Retiming
  
• Includes Power Stand

• Single Needle
  
• Compound Needle Feed And Walking Foot
  
• Speed up to 3000 Stitches Per Minute
  
• 9 Mm Stitch Length
  
• Industrial Upholstery Machine
  
  

• Single Needle
  
• Safety Clutch to protect hook and put back into timing if knocked out.
  
• Compound Needle Feed And Walking Foot
  
• Speed up to 3000 Stitches Per Minute
  
• 9 Mm Stitch Length
  
• Industrial Upholstery Machine
  
  

• Automatic thread trimmer
  
• Single Needle
  
• Compound Needle Feed And Walking Foot
  
• Speed up to 2500 Stitches Per Minute
  
• 9 Mm Stitch Length
  
• Industrial Upholstery Machine

• Single Needle
  
• Compound Needle Feed And Walking Foot
  
• 2500 Stitches Per Minute
  
• New Rectangular Feed Prevents Gathering
  
• Handles Heavyweight Materials
  
• Industrial Sewing Machine

• Single Needle
  
• Needle Feed And Walking Foot
  
• 2500 Stitches Per Minute
  
• New Rectangular Feed Prevents Gathering
  
• Includes Table, Stand, And Motor
  
• Handles Heavyweight Materials
  
• Industrial Sewing Machine

• Single Needle
  
• Needle Feed And Walking Foot
  
• 2500 Stitches Per Minute
  
• New Rectangular Feed Prevents Gathering
  
• Includes Table, Stand, And Motor
  
• Handles Heavyweight Materials
  
• Industrial Sewing Machine
  
  The Juki LU 1508 replaces the very successful Juki 562/563 model, which was sold for over 20 years and is still is use with many manufactures.
  
  This new model has many new features which Juki has researched & tested thought-out the heavy-weight fabric industry.
  
  It is a general purpose needle feed, walking foot machine for use on medium-heavy weight materials and is suited to sewing, for example, car seats, carpets, general upholstery and leather articles etc.
  
  
  
  FEATURES:
  
  
• New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
  
• Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
  
• With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
  
• Well tensed seams are consistently produced without pitch errors
  
• With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
  
• Stitch length can be easily selected by the stitch dial
  
• Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large hand-wheel
  
• Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
  
• Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
  
• Alternating vertical movement mechanism prevents irregular stitches
  
• High 16 mm presser foot lift enables easy material handling
  
• Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
  
• If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
  
• Pressing the reset button will immediately return the machine back to the normal state

• Auto Thread Trim
  
• Auto Foot Lift
  
• Auto Back Tack
  
• Needle Positioner
  
  
  
  
  Click HERE for Brochure on Juki LU-1510N-7 Walking Foot Needle Feed Sewing Machine

• Built in Bobbin Winder
  
• Knee Lifter Mechanism
  
• Automatic lubricating full rotary hook
  
• Extra Large Vertical Axis Hooks
  
• 2 Needle Type 1/4" Gauge Between Needles
  
• The sub oil pan and double filter prevents dust from entering the oil.
  
• Stitch length can be easily selected by the stitch dial
  
• The machine is full open type top design for easy maintenance and adjustment

• Includes Power Stand for USA: The Cylinder of machine bed sticks off the left hand side of the table giving it open or free arm type advantages.
  
  
• Cylinder-bed, single-needle, Unison-feed, Lockstitch Machine with a Vertical-axis Hook
  
  
• The LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves.
  This makes the machine ideal for the sewing of tubular articles.
  
  * With large vertical-axis hook
  * The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed
  * Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches
  * The ratio of alternate vertical movement remains unchanged even when the material thickness changes
  * Higher lift of the presser foot
  * The maximum alternating vertical movement is 6.5mm
  * Excellent operability and maintainability
  * The underside of the top end of the cylinder-bed is provided with an easy-to-remove cover. This promises easy cleaning of thread wastes
  * The stitch length can be easily selected by the stitch dial
  * The machine's enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel(160mm)
  * A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup
  * The machine's full-open-type top design makes adjusting works easier
  * The machine comes with a lubricating mechanism that uses a centralized oil wick
  * This substantially reduces the time and trouble required for oiling the machine. (The hook needs manual oiling with an oiler)
  * A walking foot mechanism is built into the machine arm to prevent oil from scattering
  * Complete with table stand and motor
  
  The underside of the top end of the cylinder-bed is provided with an easyto-
  remove cover. This promises easy cleaning of thread wastes.
  The stitch length can be easily selected by the stitch dial. The machine's
  enhanced operability features include a clear view of the area around the
  needle, placement of the bobbin thread winder on the front face of the
  machine arm, and a large handwheel(160mm).
  
  
• Thread range: #50-#8, B33-B92, Nm_120/3-30/3
  
• Distance from needle to neck 255mm
  
• Cylinder Bed Diameter 72mm
  
• Motor Output 750W
  
• Machine Weight 37.5 Kg

• Complete with assembled table, stand and motor

• Easy Reverse Sewing with Simple Operation
  
• Vertical Axis Large Hook with Big Bobbin
  
• Automatic Thread Safety Device
  
• Easy Feed Walking Foot
  
• Front End Bobbin Winder
  
• Works Great on Tents, Awnings, Leather, Canvas, and Vinyl

The Juki MF-7500 series state-of-the-art machine has been designed through a thorough ongoing study of seam quality. The machine is provided as standard with a great diversity of easily adjusted features to increase applicable types of sewing products. The well-balanced design of the machine achieves low-vibration and low-noise operation even under high-speed mode.

• Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.
  
  

• The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.
  
  

• A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.
  
  

• A feed dog inclination adjustment mechanism to work effectively at securing the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.
  
  

• A micro-lifter to keep the presser foot in a slightly raised position during sewing to prevent slippage and deformation.
  
  JUKI MF7523... 3-Needle, 4 -Thread, Top & Bottom Coverstitch. With Micro-adjust Differential Feed... For 3 needle operations on knit shirts, underwear, sports and leisure wear... Sewing Speed max. 6,500 rpmStitch Length: 1.2-3.6 mm (up to 4.4mm)Stitch length controlled by dialStitch/Seam type 406EFa...
  
  
  This machine comes in two table mount options:
  
  Semi-submerged: The machine 's needleplate sits about 5-6 inches above the table top (Comes Standard)
  
  Fully-submerged: The machine 's needleplate sits flush with the table (+$200.00 upon special request)
  

• MODEL NAME : LH-3528
  
• Feed system :Bottom-feed Needle-feed
  
• Application :For light-weight
  
• materials :For medium-weight
  
• materials :For jeans and
  heavy-weight materials
  
• Max. sewing speed : 3,000rpm
  
• Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
  
• Thread take-up : Slide type
  
• Needle bar stroke : 33.4mm
  
• Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
  
• Hook :Vertical-axis regular hook
  
• Needle : DP5(#9)#9
• #14
  
• Lubrication : Fully automatic lubrication system by means of plunger pump
  
• Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
  
  
• The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
  
  
• After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.

• Single Needle Feed High Lift
  
• 30.7 mm Needle Bar Stroke
  
• Automatic Lubricating Full Rotary Hook
  
• Maximum 4.5mm Stitch Length
  
• Consistent Stitch Length

• High quality machine with increased reliability and and easier operation
  
• The machine ensures both beautiful and upgraded seam quality at higher speeds
  
• The machine has been developed with the intention of providing an extended service life
  
• Further increased reliability
  
• Devices intended for conventional JUKI machines are also interchangeable
  
• Complete with assembled table stand and motor
  
  

• The JUKI LZ-391N can be used in three different ways.
  
• When this machine is used as embroidering machine, the zigzag width as large as 12mm and the sewing speed is as high as 1,700 s.p.m. When used as a zigzag stitch machine, the zigzag width is as large as 10mm and the sewing speed is as high as 2,000 s.p.m.
  
• Furthermore, the JUKI LZ-391N can be used as a straight stitching machine capable of running at a speed of 2,000 s.p.m. by simply setting the zigzag width to 0.
  
• It can be easily converted to an embroidering machine by removing the feed dogs, which make a zigzag stitch machine or a straight stitching machine.
  
• To change from embroidering to zigzag stitching or vice-versa, all you need to do is install the throat plates included and exclusive for either function, and install/remove the needle plate and feed dog. This procedure can be carried out very easily.
  
• The zigzag width and stitch length can be easily
  adjusted.
  
• The zigzag width is adjusted by raising/lowering the knee lifter using the knee. The stitch length is adjusted by moving the feed adjustment knob up/down by hand. This adjustment mechanism allows even the inexperienced operator to carry out adjustments without any difficulty and quickly,thereby enabling this machine to be used very easily.
  
• For fixed width zigzag use the settings on the face of the machine as explained on paragraph 4.3 on page 17 of Instruction Manual for Juki LZ391N.

• Stitch patterns: standard one-step to left, one step to right zigzag stitch up to 5mm.
  
• Feeding amount: standard max. 2.5 mm
  
• Sewing speed: max. 5,500 s.p.m.
  `Needle throw: max 3mm
  
• Presser foot lift:
  by hand: 5mm
  by knee: 10mm
  
• Up To 5500 Stitches Per Minute
  
• Single Needle Zigzag
  
• Zig Zag Lockstitch
  
• Satin Stitch Applique
  
• Long And Wide Zigzag
  
• Industrial Zigzag Machine
  
  The hook driving shaft offset mechanism assures trouble-free and consistent zigzag stitching.
  # The machine is equipped with a hook-driving shaft-offset mechanism which places the hook-rotating shaft off-center from the center of zigzag stroke of the needle. This mechanism allows the blade point of the hook to catch the needle thread every time regardless of the needle throwing direction. As a result, the machine is immune to sewing troubles such as stitch skipping and thread breakage, annoyances likely to occur with the conventional machine, especially when the needle throws to the right.
  
  
  The market-proven hook and thread take-up lever enables sewing with upgraded consistency with a lower tension applied to the thread.
  # With its market-proven hook and thread take-up lever, the machine produces high-quality, uniform seams even when sewing at extremely low thread tensions. In addition, these new components prevent stitch skipping and thread breakage during sewing and offer dramatically improved responsiveness to thread changing. The machine uses a wide range of thread types such as synthetic thread, spun thread, and cotton thread.
  
  The standard zig-zag stitching machine creates softly finished seams. The needle rocking mechanism is provided with a triangular cam which helps produce beautiful seams with consistency.
  
  
  
  Click HERE for Brochure on Juki LZ-2280N Series Zigzag Sewing Machines

• With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching.
  
  
• The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine.
  
  
• To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 14mm.
  
  
• By reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread.
  
  
• Ships assembled with power stand

• 1-Needle
  
• Lockstitch
  
• Needle Feed
  
• Auto Thread Trim
  
• Industrial Sewing Machine
  
  
  
  Click HERE for Brochure on Juki LZ-2280N Series Zigzag Sewing Machines

• The machine tenses thread uniformly over the zigzag stroke to produce beautifully finished stitches at a high speed. With its extended zigzag with, higher presser foot lift, and newly introduced horizontal-axis double-capacity hook, the machine upgrades the functions required for the sewing of heavy materials.
  
  
• With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching.
  
  
• The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine.
  
  
• To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 11mm.
  
  
• By reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread.
  
  
• Ships assembled with power stand
  
  LZH-1290-7(with automatic thread trimmer) 1-needle, Lockstitch, Zigzag Stitching Machine with Large Hook.

• High efficient basting works at a sewing speed of 1,800rpm.
  
• Chainstitch is continuously formed with a single thread and by a blind looper which eliminates the need for a bobbin thread refilling. In addition, the basted seam can be easily undone.
  
• Basting works are efficiently done with a maximum stitch length of 10mm which is easily set up by a control dial.
  
  Applications:
  
• The basting of the front edges, edge and stand of collars,
  flaps of men's and ladies' suits and coats.
  
• The basting of the waist bands, the flies of trousers slacks, etc.

• MODEL NAME : LH-3528
  
• Feed system :Bottom-feed Needle-feed
  
• Application :For light-weight
  
• materials :For medium-weight
  
• materials :For jeans and
  heavy-weight materials
  
• Max. sewing speed : 3,000rpm
  
• Max. stitch length : 4mm (normal/reverse feed) 5mm normal/reverse feed)
  
• Thread take-up : Slide type
  
• Needle bar stroke : 33.4mm
  
• Lift of the presser foot : By hand: 5.5mm, By knee: 12mm
  
• Hook :Vertical-axis regular hook
  
• Needle : DP5(#9)#9
• #14
  
• Lubrication : Fully automatic lubrication system by means of plunger pump
  
• Lubricating oil : JUKI New Defrix Oil No.2(equivalent to ISO VG32)
  
  
• The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
  
  
• After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.

• Easy Reverse Sewing with Simple Operation
  
• Vertical Axis Large Hook
  
• Automatic Thread Safety Device
  
• Automatic Thread Cutter
  
• Automatic Buttonhole Cutter
  
• Front End Bobbin Winder
  
• Buttonhole Sewing Machine
  
• Uses DP5 (#11J) needles

• Setting of functions such as the pattern number and the needle thread tension can be entered through the operation panel with ease. It is also possible to easily change the distance between buttonholes by means of the enlargement / reduction function.
  
• The operation panel is provided as standard with a USB port. This means that the sewing machine data management and software updating can be carried out with ease by means of the USB port.
  
  This sewing machine achieves higher productivity with its improved capabilities such as the maximum sewing speed of 4,200 sti/min, quick acceleration at the beginning of sewing and quick deceleration at the end of sewing, increased thread trimming speed and the auto-lifter performance.
  
  Main functions driven electrically
  The electric-driven mechanism has been adopted for the work clamp foot lifter, needle / bobbin thread trimmers, work clamp foot pressure regulator, cloth trimming knife and thread tension controllers, thereby ensuring stable sewing that produces beautiful seams with less operating noise.
  
  Active tension (electronic thread tension control mechanism)
  
• The needle thread tension can be separately set for the parallel section and bartacking section of the buttonhole seam according to various sewing conditions (thread, material, sewing speed, etc.) given, and those setting data can be stored in memory.
  
• The needle thread tension can be changed over at the parallel and bartacking section of the buttonhole seam without fail, thereby producing beautifully-finished buttonhole stitch shape.
  
• The needle thread tension to be employed at the beginning and end of sewing can be set individually.
• This helps prevent slip-off of the thread at the beginning of sewing and unravel of the finished seam.
  
  Multiple-times knife dropping
  Thanks to JUKI's unique multiple-times knife dropping function, the knife replacement is no longer required even when the buttonholing size is changed. In the case of small-lot production, frequent change in the sewing size and / or sewing of different cycle sewing patterns with different sewing sizes are required. In such a case, the number of times to drop the cloth trimming knife are automatically set according to the buttonholing size.
  
  As many as 31 different buttonholing shapes are provided as standard
  As may as 99 different sewing patterns can be stored in memory.
  The sewing patterns that are stored in memory can be selected as desired through the operation panel.
  
  Work clamp foot lifting height
  The work clamp foot lifting height can be set as desired. The work clamp foot can be lifted as high as to 17 mm by the use of the reverse-rotation needle-up function.
  
  Basting stitch on elastic materials
  The basting stitch is effective on elastic materials such as knits.
  
  Basting stitch : Since the needle thread is tucked in without fail, it will never jut out of the buttonhole seams. Basting stitch can be sewn by nine rounds.
  
  Easy changeover of sewing settings
  Changeover between purl stitching and whip stitching and between single stitching and double stitching can be carried out with ease.

• Using conventional machines, it's often quite difficult to reproduce the same sewing conditions. This machine does it with ease. With this capability, the MEB-3200 responds immediately to material changes, significantly reducing the time required for setup changes or adjustments. The machine
  also ensures the consistent production of high-quality seams.
  
  Thread tensions can be separately established for various sections of a buttonhole such as eyelet sections and
  parallel sections.
  
• The machine promises high-quality seams by smoothly responding to changes in stitch formation and allowing the operator to set a separate thread tension for the bartacking sections of buttonholes.
  
• Thread tensions for the beginning and end of sewing can also be separately established. This helps prevent loose stitches or slip-off or raveling of thread at the beginning of sewing.
  
  Threading work can be more easily.
  
• Since fewer parts need to be threaded, the machine can be threaded more quickly and easily than conventional buttonholing machines.

• Using conventional machines, it's often quite difficult to reproduce the same sewing conditions. This machine does it with ease. With this capability, the MEB-3200 responds immediately to material changes, significantly reducing the time required for setup changes or adjustments. The machine
  also ensures the consistent production of high-quality seams.
  
  Thread tensions can be separately established for various sections of a buttonhole such as eyelet sections and
  parallel sections.
  
• The machine promises high-quality seams by smoothly responding to changes in stitch formation and allowing the operator to set a separate thread tension for the bartacking sections of buttonholes.
  
• Thread tensions for the beginning and end of sewing can also be separately established. This helps prevent loose stitches or slip-off or raveling of thread at the beginning of sewing.
  
  Threading work can be more easily.
  
• Since fewer parts need to be threaded, the machine can be threaded more quickly and easily than conventional buttonholing machines.