![reliable, hsg0, HSG-O, eng, knife, engle, hand, held, cutter, Hot Cutter, HSGM, 60W, Heats, 6, Seconds, 6.5', Cord, Synthetic, Cloth, Fabrics, Cutting, Cut, Edge, Sealing, Reliable, 2, Lbs, UL](https://www.allbrands.com/images/products_main/M_10032_1631865.jpg)
7738: Engle HSGM 60W Handheld Electric Hot Knife Heated Cutter +Cutting Blade |
Our Price: $269.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the same business day.
Condition: New In Box
|
Features
Includes One HSG-O Engblader Blade H/205 Type R for HeiBschneider HSGM, HSG0 Handheld Electric Hot Knife Cutters, synthetic fabrics, ropes, strings. Color may vary from Green to Grey.
The manufacturer's sealed box does not include a blade, Allbrands provides the 1 blade to make it complete
"The HSG-O HSGM Hot Knife will cut and seal synthetic canvas fabric. The tip of the blade is relatively sharp". HSG-O HSGM Hot Knife is UL Underwriters Laboratories Listed
- Cuts small and large lengths of sythetic woven or knitted fabric in straight lines and curves while simultaneously fusing the edges to prevent fraying. The blade heats quickly, eliminating idle time. Also suitable for cutting and welding ropes, cords, and cables made of fully synthetic fibers such as nylon and polyester.
- Hot cutting is made easy with the HSG-0 hand held cutter. Heats up in just 6-8 seconds, and cuts and seals the edges of synthetic fabric, such as cords, ropes, bands and belting fabric.
- This cutter is so easy and economical to use; you will wonder how you did without it.
- Made for cutting acrylic fabrics. Excellent to cutting nylon rope or webbing. Cuts and welds ends cleanly! The newer model has lights to help with following cut lines.
Type HSGO AC only, 110v- 60Hz, 60 W, UL Listed 71B9
- Heat may be controlled by switching tool on and off. Light activated by heat switch.
- Re: cutting PVC coated material. PVC releases a hazardous fume when cut with heat that has been known to cause lung problems.
HSGM HSG-0 Heat Cutter (SKU: H/100, 110V/60Hz/70W). Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Heat up time of a blade, approx. 6-8 seconds. Heat temperature of a blade, approx. 1100 degrees Fahrenheit (600* C.). Blade heat may be roughly controlled by depressing/releasing the trigger. A variety of different sytle HSGM blades are sold separately. This unit is also available in 220 volt (Part #H/100-220). This product is always in stock. Made in Germany.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
-
Model: HSG0
-
Electrical: 1/110V
-
Power input: 60 watts
-
Intermittent operation: ¼ min.
-
Cord length: (6.5 ft)2 m
-
Weight: 2.2 Lbs (1 kg)
HSG-O Parts List:
01 - Housing, green ID: H/801
01 - Housing, gray ID: H/801-PA
02 - Round screw ID: H/802
03 - Hexagon Nut ID: H/803
04 - Slotted Round Nut M2.5x32 ID: H/804
05 - Hexagon Round screw ID: H/805
06 - Front Housing Plate ID: H/806
07 - Round screw ID: H/807
08 - Hexagon Nut ID: H/808
09 - Lamp ID: H/809
10 - Hook ID: H/810
11 - Trigger ID: H/811
12 - Pin-Op Switch ID: H/812
13 - Lever Return Spring ID: H/813
14 - Transformer, 110 Volt ID: H/814-110
15 - Terminal Plate ID: H/815
16 - Retaining Plate ID: H/816
17 - Round screw (replaced by H/807) ID: H/817
18 - Mains Lead ID: H/818
19 - Lead Bushing ID: H/819
20 - Microswitch ID: H/820
21 - Socket ID: H/821
22 - Retaining Screw for Blade ID: H/822
23 - Condensor ID: H/823
24 - Resistor ID: H/824
25 - Slit-head Screwdriver for HSG-0 ID: H/825
![Floriani, Heat Cutting, Cutting Tool, Heat Cutter, Applique, Heat Tool, Wood Burning,](https://www.allbrands.com/images/products_main/M_81648_3925369.jpg)
Floriani FL-HEATCR Heat Cutting Tool Kit |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the same business day.
Condition: New In Box
|
Features
Use the RNK Heat Craft Tool to:
- Cut Plastic Stencils, Nylon Textiles, Dacrons, Polyesters, etc. (not for use on cotton, linen, silk)
- Trim Embroidery Designs, Appliques, Patches, Flags, Outdoor Textiles and more With Detail!
- Spot Bond Using Fusible Backings & Webbings
- Transfer Laser Images to Wood
- Create Intricate Designs with Hot Branding on Polyester Felt, Wood & Leather Craft Projects Using the Various Unique Tips
IMPORTANT: This tool gets extremely hot - change tips when tool is cold ONLY!
Non-US Warranty: 30 days parts and labor.
Specifications
- Do not touch any metal part when using this tool.
- Rest the RNK Heat Craft Tool on the included tool rest only when not in use.
- This tool is NOT a toy. Not for the use of children under the age of 14. Children should be old enough to understand the extreme temperature and should be cautiously supervised when using.
- Unplug the tool if you are leaving it for a period of time.
- Burn in a well ventilated area! Some materials (like foam or any kind of plastic) will produce fumes, air circulation is a must.
![reliable, engblader, HSGM, HSG0, replacement, blade, ENG, KNIFE, Type, R, r100, H/205, HeiBschneider, Hand, held, Electric, Hot, Cut](https://www.allbrands.com/images/products_main/M_33721_8068.jpg)
8068: Engle HSGM Engblader Hot Knife Replace 15mm Cutting Blade H/205 Type R |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
Replacement blade for Reliable™'s hot hand held cutter HSGO.
General use blade with higher capacity for separating stronger fabrics, strings and ropes up to 15mm in diameter. Suitable for use with all units.
Note: Hot Knife Customer used Five Star PBW Cleaner (Powdered Brewery Wash) to clean Nylon off of a hot knife.
Non-US Warranty: 30 days parts and labor.
![Engle, H600, HSGM, Engblader, Hot, Knife, SF, Cutting, Foot, Engle HSGM Engblader Hot Knife SF Cutting Foot Shoe Plate Attachment SF for HSG-0](https://www.allbrands.com/images/products_main/M_90428_7478519.jpg)
|
Our Price: $199.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
The SF Cutting Foot is only needed if a glass surface is not available for cutting. It is for workers cutting on a wooden bench, a concrete floor, or some other material that will burn or damage the blade.
Non-US Warranty: 30 days parts and labor.
![Engel, H/215, Form, 2, Guillotine, Cutting, Blade, 45, mm, 1.7716, Inch, Width, cut, webbing, rope, HSGM, HSG-0, HSG-1-VW, GmbH, Hot, Knife](https://www.allbrands.com/images/products_main/M_38116_26751.jpg)
|
Our Price: $79.99 Prices are subject to change, and only current prices will be honored.
Availability: OUT OF STOCK
Condition: New In Box
|
Features
Cutting blade to cut webbing and rope (width 45mm or 1.7716 inches); Suitable for use with all HSGM units.
Hot Knife Customer used Five Star PBW Cleaner (Powdered Brewery Wash) to clean Nylon off of a hot knife.
Non-US Warranty: 30 days parts and labor.
![HSGM GmbH Engel HSG-1-VW Electric Hot Knife Heat Cutter 110V 160W 1110°F, Continuous Operation, 6-8 Sec. Heat Up, 12.8lbs](https://www.allbrands.com/images/products_main/M_38111_26744.jpg)
26744: HSGM GmbH Engel HSG-1-VW Electric Hot Knife Heat Cutter 110V 160W 1110°F |
Our Price: $1,399.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 5-7 business days.
Condition: New In Box
|
Features
HSG-1-VW (110V/160W) - Small unit with temperature control, suitable for more continuous cutting operation and sealing of cords, ropes, webbing, and belts, etc. Blades heat in 6-8 seconds approx. Heat may be controlled by pressing/releasing switch of handle. Flexible 2m Meter Cord connects handle Type M to unit.
Hot Knife Customer used Five Star PBW Cleaner (Powdered Brewery Wash) to clean Nylon off of a hot knife.
Non-US Warranty: 30 days parts and labor.
Specifications
- Heats up in only 6-8 seconds
- Infinitely variable working temperature
- Working temperature 600°C (1110°F) max.
- Supply voltage: (110V - 60Hz)
- Power input: 160 Watt max.
- Continuous operation
- Illuminated rocker switch
- Supply cord 2 m, with European-type plug (US-type plug).
- Class I protection
- Dimension: 155 x 220 x 105 mm
- Weight: 5.8 kg (12.8lbs)
![](https://www.allbrands.com/images/products_main/M_1614_9882389.jpg)
Consew CN1150H/C, Hot or Cold Knife Strip Cutter & Unassembled Power Stand |
Our Price: $2,199.99 Prices are subject to change, and only current prices will be honored.
Availability: Advance Orders Only. Please review the product description for complete details.
Condition: New In Box
|
Features
OVERVIEW
Hot Knife Strip Cutter, Straight Cuts To Any Length Up To 60" (150cm), Any Width Of Tape Up To 2-1/8" (55mm), Digital Cut Counter With Reset, Transparent Plastic Knife Shield
APPLICATIONS
Use for most non-elastic materials such as tapes, ribbons, lace, spaghetti, belts, straps, cords and webbing.
Eliminates tedious manual labor, assures accuracy and uniformity of cuts.
FEATURES
Shearing Action Of Guillotine Type Knives, Make Straight Cuts To Any Length Up To 60" (150cm).
Any Width Of Tape Up To 2-1/8" (55mm).
Simplest Screw Adjustment For Changing Length Of Cut. No Tools Required.
Equipped With:
Digital Resettable Cut Counter
Fixed Ratio Speed Reducer
Tape Reel
Transparent Plastic Knife Shield
Can Be Furnished With Pre-feeding Device For Most Accurate Cuts Of Elastic Materials (optional)
Available as a complete assembled unit with heavy duty steel stand, formica-type table top and 110 vac motor.
Also available with 220v. 3-phase motor
Applications
Eliminates tedious manual labor, assures accuracy and uniformity of cuts.
Complete unassembled heavy duty steel stand, formica type table top and 110 VAC motor. (Also available with 220v, 3-phase motor.
Consew List of Parts for Model CN-1150
Non-US Warranty: 30 days parts and labor.
Specifications
Consew CN1150HC
SPECIFICATIONS
Cutting Size: up to 60" length; up to 2 1/8" width
Cutting Speed: 30-80 pieces per minute (depending on length and thickness)
Screw adjustment for changing length of cut; no tools required.
Equipped With:
- Digital Resettable Cut Counter
- Fixed Ratio Speed Reducer
- Tape Reel
- Transparent Plastic Knife Shield
*Can be furnished with pre-feeding device for most accurate cuts of elastic materials (optional).
NOTE: Also available as CN1150: Cold Knife Version
![Consew Model CN1150, Cold Knife, Strip Cutter Machine, Unassembled Power Stand](https://www.allbrands.com/images/products_main/M_94115_3963690.jpg)
Consew Model CN1150H/C, Hot Knife Strip Cutter |
Our Price: $1,699.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
OVERVIEW
Cold Knife Strip Cutter, Straight Cuts To Any Length Up To 60" (150cm), Any Width Of Tape Up To 2-1/8" (55mm), Digital Cut Counter With Reset, Transparent Plastic Knife Shield
APPLICATIONS
Use for most non-elastic materials such as tapes, ribbons, lace, spaghetti, belts, straps, cords and webbing.
Eliminates tedious manual labor, assures accuracy and uniformity of cuts.
FEATURES
Shearing Action Of Guillotine Type Knives, Make Straight Cuts To Any Length Up To 60" (150cm).
Any Width Of Tape Up To 2-1/8" (55mm).
Simplest Screw Adjustment For Changing Length Of Cut. No Tools Required.
Equipped With:
Digital Resettable Cut Counter
Fixed Ratio Speed Reducer
Tape Reel
Transparent Plastic Knife Shield
Can Be Furnished With Pre-feeding Device For Most Accurate Cuts Of Elastic Materials (optional)
Available as a complete assembled unit with heavy duty steel stand, formica-type table top and 110 vac motor.
Also available with 220v. 3-phase motor
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
SPECIFICATIONS
Cutting Size Up to 60" length
Up to 2 1/8" width
Cutting Speed 30-80 pieces per minute (depending on length and thickness)
![](https://www.allbrands.com/images/products_main/M_119271_4034239.jpg)
|
Our Price: $62.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
|
Features
Cutting blade to cut fabric. This is one of our better blades for cutting curves in fabric. 9mm heated cutting area which comes to a point. The HSO-N blade is very good for cutting where a precise touch is needed.
Please note: We do not recommend cutting any type of PVC (Polyvinyl Chloride) or PVC coated materials with HSGM equipment because of the dangerous fumes it releases. We do recommend wearing a breathing filter mask while cutting any type of material with HSGM equipment. Also always review the materials MSDS (Material Safety Data Sheet) before cutting with HSGM equipment.
Non-US Warranty: 30 days parts and labor.
Specifications
- 1mm blade tip thickness
- Width of tip of blade: 9mm
- Max. blade tip temperature: 1100