Note: An unexpected spike in electricity might cause this unit to go into the "reset" mode which will temporarily prevent it from heating up. This is a built-in safety feature.

The Inspire 26 replaces the older FP202E model. The main differences are that the boards have been updated, the handle with steamburst has been improved, but the size and specifications are the same.

We are now shipping the new 1600W Family Press, which replaces the prior 1600W model
The Yamata Family Press is the first and most advanced electronic steam press. The FP-202E comes with the most accurate settings and safety features while incorporating features available with regular steam presses.

More Yamata FP202e Features:

• For all types of clothing: pleated skirts, pants, blouses, shirts, ties, cloth belts, and scarves
  
• 26" by 10" pressing board dimensions
  
• 100 Pounds Pressing Pressure
  
• Auto shut-off if down over 10 seconds
  
• Auto shut-off if left up for over 15 minutes
  
• Includes sleeve pad and spray bottle
  
• Portable an easily stored
  
• LED lights for power, correct temperature, and steam
  
• Instruction Manual
  
  Please note: For home use only.

Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Compare to Ricoma and Reliable larger 34x11", ETL Approved. A steam press for HOME USE that you can get the inseam length of most pants onto the pressing boards!

This Family Press Inspire 32 replaces the older Family Press FP202L model. The main differences are that the curcuit boards have been updated, the handle with steamburst has been improved, but the size and specifications are the same as the FP202L .

The initial shipments of the 32"x10" Family Press FP202L come in the same, color carton as the 26x10" Family Press FP202E and the instruction book has not yet been updated for the larger board size. Neither has the model number on the back of the press, which still says FP202E. You can verify that the press you receive is the new 32x10" bed size. Please measure the 32x10" board dimensions to be sure. In that case, you have the correct long board press, regardless of the FP202 model number suffix on the back. John Douthat

The Yamata Family Press is the first and most advanced electronic steam press. The 32x10" FP-202L comes with the most accurate settings and safety features while incorporating features available with regular steam presses.

More Yamata FP202L Features:

• Works for all types of clothing: pleated skirts, pants, blouses, shirts, ties, cloth belts, and scarves. Also tablecloths, napkins, sheets, pillowcases, etc.
  
• 32" by 10" pressing board dimensions
  
• 100 Pounds Pressing Pressure
  
• Safety Feature: Auto shut-off if down over 10 seconds
  
• Safety Feature: Auto shut-off if left up for over 15 minutes
  
• Includes sleeve pad and spray bottle
  
• Portable an easily stored
  
• LED lights for power, correct temperature, and steam
  
• Instruction Manual
  
• Digital control and LED lights for power, correct temperature, and steam.
  
• Extra large 32" x 10" pressing board - non-stick Teflon pressing surface is approximately 9 times of standard irons. No other press in the market offers a pressing area close to the FP202L.
  
• Any commercial use voids manufacturer and dealer warranty provisions.
  
  Please note: For home use only. Note: Home Ironing Board Presses have 100 pounds pressure between upper iron plate and lower ironing board. Pressure is less at ends of the boards, depending on press width, fabrics and garments.
  Clamping mechanisms are in the middle of the press and lose some pressure at the ends You can equalize the pressure using press cloths at one or both ends. We have few complaints in 38 years. It is not a problem on shorter boards like Elna. Miele and Singer rotary presses are best for equal pressure. [email protected], Owner and Tech.

Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

The Inspire 36 replaces the older FP202XL model. The main differences are that the boards have been updated, the handle with steamburst has been improved, but the size and specifications are the same. Take the hassle out of ironing with the INSPIRE 36 large surface electronic deluxe steam press. This large steam press features an LED temperature display for accuracy and improved electronics, and it offers steam and dry settings. The 36-inch height allows the user to press large areas of fabric at once, making pressing the wrinkles from inseams and dresses simple and easy. Specially designed contour handle offers easy and strong grip. Vertical storage allows for this large steam press to fit into the tightest of spaces.

• 212°-392°F Temperature range
  
• Largest steam press plate at 36" x 11"
  
• Steam and dry capabilities
  
• 1600 Watts of power with steam burst
  
• 100 lbs of pressure
  
• LED Temperature display
  
• Stores vertically for easy storage
  
• Audible safety alarm
  
• Non-stick teflon heating plate
  
• Timed safety auto shutoff
  
• Press the entire inseam of your pants.
  
• Application Power: 110-120V,60Hz
  
• Power : 1600 Watts (Only one in the market)
  
• The Heat Plate is the Top of The Iron. The actual size is 36 x 11. The ironing board below is 1 inch smaller so the 36x11" heat plat shoe above can pres to the edges.
  
  Note: Home Ironing Board Presses have 100 pounds pressure between upper iron plate and lower ironing board. Pressure is less at ends of the boards, depending on press width, fabrics and garments.
  Clamping mechanisms are in the middle of the press and lose some pressure at the ends You can equalize the pressure using press cloths at one or both ends. We have few complaints in 38 years. It is not a problem on shorter boards like Elna. Miele and Singer rotary presses are best for equal pressure. [email protected], Owner and Tech.

Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Fit Family Press FP202XL Steam & Dry Ironing Press

Cover
• 100% Cotton Non Stick Blue Coated Stick Resistant covered Coated Ironing Board Cover
• Scorch, Stain & Stick Resistant
• Adjustable Draw Cord Binding-For a Fit Snug!

Pad
• 100% Polyester Needle-Punched Synthetic Flannel
• Mildew, Moisture & Scorch Resistant
• High Heat Retention
• Superior Durability & Resiliency
• Forms a Dense Cushion Under Cover

Non-US Warranty: 30 days parts and labor.

First ever stand up height ironing press metal stand for users who do not want to sit down to do their ironing and pressing. Includes Hold-down Bolt only for holding FP202 and Inspire Presses to Stand. Otherwise, use Velcro Strap.

Note: Steam Press hold down bolt 12mm x 1" is included in ST04 only for Family Press FP202L&E models and will need substitution at the local hardware store for other brands and models of steam presses. Velcro straps are not needed if presses are bolted down to the stand. The hold down bolt with China Feiyue ST06 Stand is not the right thread size or length for Reliable Empressa and other brands, so you need to take the bolt to a local hardware store for the next size up 13mm x 1" metric threaded bolt and add lock/washers for increased stability and permanent installation. If you use a 14x1" tighter threaded bolt, you will have to slightly ream out the hole in the stand which is too small for the 14mm bolt. John Douthat, Tech


Fitting any stand to any press requires customers getting the right metric bolt and lining the threaded hole in the press up with the access hole in the stand.
Otherwise use velcro straps to hold the press to the stand, as Reliable does with their own brand of steam presses and stands. Its like putting any sewing machine in any cabinet with a hold down bolt which which is not provided with either the machine or the table.

• Stand fits most Steam and Dry Presses
  
• Provides a sturdy place to press your garments
  
• Height of Platform is 36.5 inches (91.44 cm)
  
• Platform for press to sit on is 16 x 11"
  
• Metal footers are 14" wide
  
• Distance between metal footers is 18"
  
• Operating height of press board with stand is 37"
  
  Family Press ST-6 Instruction Manual(.PDF)
  

Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

• Stand fits most Steam and Dry Presses.
  
• Made of Heavy Duty aluminum
  
• Provides a sturdy place to press your garments
  
• Very comfortable and adjustable
  
• Not Compatible with Family FP202XL Press.

Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Extended US Warranty: 1 year parts, 90 days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Sorry No Coupons. There hadn't been a new product for ironing in years - and I got sick and tired of using aerosol starch! So now I've introduced a clear, crisp starch with a lovely scent that makes ironing more enjoyable. It's in a non-aerosol bottle, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

Non-US Warranty: 30 days parts and labor.

There hadn't been a new product for ironing in years - and I got sick and tired of using aerosol starch! So now I've introduced a clear, crisp starch with a lovely scent that makes ironing more enjoyable. It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

It's in a non-aerosol can, so it's environmentally-friendly and you can see how much is left, too. There's no flaking, clogging, or white residue on dark fabrics. A special stain shield protects fabrics, and the product helps resist wrinkles. Best of all, it's more effective than any starch you've ever used.

Non-US Warranty: 30 days parts and labor.