 |
November 23, 2024 |
Brother, Hoop Tech, Durkee, Fast Frames for PR600 PR620 PR650 PR1000 PR1000E, Babylock BMP6 EMP8/9 ENT10 BNT10
Brother Compatibility Chart for PRS100, PR670E, PR1050X and Brother Hoops that Work with each model.
Alphasew P60876 Universal Cap Hat Hoopster Frame 5.25x4.5" Fits Inside 6.25x5.25" or Larger Embroidery Hoops, Clamp Holds Brim Down, Add Sticky Stab
 38: Alphasew P60876, ST878 Universal Cap Hat Hoopster Fits Hoops from 5-1/4"x6-1/4" or Larger" |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Create exquisite embroidery designs on baseball-style cap crowns with the universal cap hoopster!
Use Sticky Adhesive Stabilizers listed under Recommended Accessories below.
Easily attaches to your embroidery hoop and firmly clamps the visor into place to embroider your design. Your hoop must be larger than 5-1/4" x 6-1/4" with thickness of hoop 1/4" or less.
The Cap Hoopster comes with a template grid to assist you with proper placement of embroidery designs.
NOTE: Does not work with Simplicity SE3 Embroidery machine or the Baby Lock Ellegante machine.
It also will not work with 4x4 embroidery hoops.
Use Sticky Adhesive Stabilizers listed under Recommended Accessories below.
Easily attaches to your embroidery hoop and firmly clamps the visor into place to embroider your design. Your hoop must be larger than 5-1/4" x 6-1/4" with thickness of hoop 1/4" or less.
The Cap Hoopster comes with a template grid to assist you with proper placement of embroidery designs.
NOTE: Does not work with Simplicity SE3 Embroidery machine or the Baby Lock Ellegante machine.
It also will not work with 4x4 embroidery hoops.
- Cap Hoopster allows you to embroider on a typical baseball style cap
- Clamps to embroidery hoops larger than 5.25" x 4.5"
- Cap bill is held down outside your regular hoop
- Measures: 6-1/4" W x 8-3/4" L
- Requires sticky stabilizer such as those at
Stabilizers
Singer Futuras
Janome 300E and up
Bernina 330,340 by Janome
Brother/Babylock 5x7" Hoops and up
Viking, Pfaff, Singer Quantum
Futura Hoops over 5x6 or 6x5
# P60876
[BABYLOCK] - EM1, EM2, ESI, ESE
[BERNINA] - 180, 185, 190
[BROTHER] - PC7000, PC7500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003
[ELNA ] - 9006
[NEW HOME] - MC10000, MC5000, MC9000
[PFAFF] - 7500
[SINGER] - XL1000, XL5000
[VIKING] - #1, #1+, Designer I & II
* Makes the cap embroideryeasy-simply attaches to the machinehoop.
* A special clamp firmly holds the visor, securely keeping the cap in place throughout your projects.
* Including a transparent template with grid marking to ensure proper design placement.
* With the Cap Hoopster, you will be able to embroider beautiful designs on caps.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
It will not fit Janome 8000, etc and Singer XL100 series BABYLOCK - EM1, EM2, ESI, ESE BERNINA - 180, 185, 190 BROTHER - PC7000, PC7500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003 ELNA - 9006 NEW HOME - MC10000, MC5000, MC9000 PFAFF - 7500 SINGER - XL1000, XL5000 VIKING - #1, #1+, Designer I & II Makes the cap embroidery easy-simply attaches to the machine hoop. A special clamp firmly holds the visor, securely keeping the cap in place throughout your projects. Including a transparent template with grid marking to ensure proper design placement. With the Cap Hoopster, you will be able to embroider beautiful designs on caps.Babylock Sewing Machine Models:
EM1, EM2, ESE, ESI
Bernina Sewing Machine Models:
180, 185, 190, 500, 600
Brother Sewing Machine Models:
LB6800PRW, PC7000, PC7500, PC8200, PC8500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003
Elna Sewing Machine Models:
8006, 9006
Husqvarna Viking Sewing Machine Models:
#1, #1+, Designer I, Designer II, Designer SE, Designer I USB, Designer I ESS, Quilt Designer II, Designer II, Quilt Designer, Designer Diamond, Designer Topaz 30, 20, Designer SE, Sapphire 875Q, Sapphire 870, Sapphire 855, Sapphire 850, Sapphire 835, Sapphire 830
Janome (Newhome) Sewing Machine Models:
10000, 5000, 9000, MC10000, MC5000, MC9000
Pfaff Sewing Machine Models:
7500, 7570
Singer Sewing Machine Models:
XL1000, XL5000
# P60876
- UNIQUE UNIVERSAL
* Makes the cap embroideryeasy-simply attaches to the machinehoop.
* A special clamp firmly holds the visor, securely keeping the cap in place throughout your projects.
* Including a transparent template with grid marking to ensure proper design placement.
* With the Cap Hoopster, you will be able to embroider beautiful designs on caps.
[BABYLOCK] - EM1, EM2, ESI, ESE
[BERNINA] - 180, 185, 190
[BROTHER] - PC7000, PC7500, PE100, PE150, PE200, PE8200, PE8500, ULT2001, ULT2002, ULT2003
[ELNA ] - 9006
[NEW HOME] - MC10000, MC5000, MC9000
[PFAFF] - 7500
[SINGER] - XL1000, XL5000
[VIKING] - #1, #1+, Designer I & II
Durkee Durkee Multi-Needle Power Pack for BL/BR 6 & 10 Needle Machines Includes Cap Frame and 7 Piece EZ Frame Set
 Durkee Multi-Needle Power Pack for BL/BR 6 & 10 Needle Machines Includes Cap Frame and 7 Piece EZ Frame Set |
Our Price: $490.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Combine two (2) Best Selling products from Durkee for multi-needle machines and you get a true Power Pack! This package includes Durkee's World Famous Cap Frame allowing for larger designs and is much easier to use than "cylinder" type devices. Add Durkee's Seven (7) piece EZ Frame set and embroidery just got easier and more fun!
Non-US Warranty: 30 days parts and labor.
Brother PRMS360 Hoopnetic Magnetic Sash, Border and Quilting Frame 7.87 x 14" for PR1050X PR1055X, PR1000 PR1000E, PR670E, PR680W, PR1X
 98321: Brother PRMS360 Hoopnetic Magnetic Sash Frame for PR1000 PR1000E PR1050X PR1055X PR670E |
Our Price: $449.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Hoop and embroider thick materials with ease, Avoid fabric shifting and the need to rehoop the fabric when connecting designs or embroidering large areas, Just slide the fabric on the frame for the next area to be embroidered. Patent-Pending Brother Exclusive Hoopnetic Magnetic Frame Hoop and embroider thick materials with ease.
- Includes 8 magnets and frame (4 long magnets, 4 short magnets)
- For use with PR1000, PR1000e, PR1050X, PR1055X, PR655, PR670E
- Stitch any area of your choice
- Sewing area 360 mm x 200 mm
- Works with thicker materials too!
Brother Free Firmware Updates for PR multi needle embroidery machines to recognize the new PRMS360 Hoopnetic Magnetic Sash Frame for PR1000, PR1000E, PR1050X, PR1055X, PR670E, PR655:
Version 1.30 Software Update Now Available for the Entrepreneur Pro X PR1050X
Version 4.40 Software Update Now Available for the Entrepreneur Pro PR1000E/PR1000
Version 1.10 Software Update Now Available for the Entrepreneur 6-Plus PR670E
Version 4.50 Software Update Now Available for the Entrepreneur PR655
We would like to inform you we have released several software updates for the Entrepreneur Series on Brother Solutions Center. Updating your 6-needle or 10-needle embroidery machine with this software will provide you with the ability to use the new Hoopnetic Magnetic Sash Frame.
PR1050X
Version 1.30
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 360mm x 200 mm (14 inches x 7-7/8 inches).
PR1000e and PR1000
Version 4.40
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 360mm x 200 mm (14 inches x 7-7/8 inches).
PR670E
Version 1.10
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 300mm x 200 mm (11-3/4 inches x 7-7/8 inches).
PR655
Version 4.50
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 300mm x 200 mm (11-3/4 inches x 7-7/8 inches).
Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
Non-US Warranty: 30 days parts and labor.
Specifications
There is no need for pressure or physical force to be able to hoop the fabric. The magnets only need to be affixed while straightening out the wrinkles on the fabric. The fabric slides while retaining one small magnet each on the upper and lower side of the frame and allows parallel sliding.The Brother Magnetic Sash Frame from our Hoopnetic Series on Brother Luminaire XP2, and PR1055X
Big Reveal New Brother PR1055X in debth with Coleen Swettman and Special Guest! Part 4
Brother Free Firmware Updates for PR multi needle embroidery machines to recognize the new PRMS360 Hoopnetic Magnetic Sash Frame for PR1000, PR1000E, PR1050X, PR1055X, PR670E, PR655:
Version 1.02 Software Update Now Available for the Entrepreneur Pro X PR1055X
Version 1.30 Software Update Now Available for the Entrepreneur Pro X PR1050X
Version 4.40 Software Update Now Available for the Entrepreneur Pro PR1000E/PR1000
Version 1.10 Software Update Now Available for the Entrepreneur 6-Plus PR670E
Version 4.50 Software Update Now Available for the Entrepreneur PR655
We would like to inform you we have released several software updates for the Entrepreneur Series on Brother Solutions Center. Updating your 6-needle or 10-needle embroidery machine with this software will provide you with the ability to use the new Hoopnetic Magnetic Sash Frame.
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 360mm x 200 mm (14 inches x 7-7/8 inches).
PR1055X
Version 1.02
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 360mm x 200 mm (14 inches x 7-7/8 inches).
PR1050X
Version 1.30
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 360mm x 200 mm (14 inches x 7-7/8 inches).
PR1000e and PR1000
Version 4.40
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 360mm x 200 mm (14 inches x 7-7/8 inches).
PR670E
Version 1.10
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 300mm x 200 mm (11-3/4 inches x 7-7/8 inches).
PR655
Version 4.50
The optional embroidery frame Magnetic Sash Frame (PRMS360) can be recognized on the machine.
The maximum embroidery area available for this machine is 300mm x 200 mm (11-3/4 inches x 7-7/8 inches).
Please click here to visit the Brother Solutions Center to view/download the update. Once at the site, select your Operating System.
Brother PRCF5 4pc Flat Brim Hat Hoop 2.5x5" Mounting Bracket, Cap Driver, Universal PR1055 PR1050 PR1000 PR680 PR670 PR655 PR650 PR620 PRS100 Babylock
 98322: Brother PRCF5 Flat Brim, 2.5 x 5" Frame Hoop, Mounting Bracket, Cap Driver 3pc Equipment for PR1055X PR1050 PR1000, PR675 PR655 PR650 PR620 PRS100 BL |
Our Price: $1,249.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Back in Stock! Embroider more types of hats than before with the easy-to-use "scratch-free" cap frame, You can stitch an industry-leading 35% closer to the brim (6-10mm), depending on the cap.
Cap Alignment
Affixing the upper frame simply by pressing allows correct alignment by aligning the center of the frame and the cap.
Anchoring the Brim
The cap curves according to its natural curvature and allows the original shape to be retained without any distortion or scratches after removing the frame. With the old frame, the brim bends or changes shape due to it being secured with a brim clamp. Because of this, people who use the old frame may find that the brim does not return to its original shape even after removing the clamp.
Embroider Closer to the Brim
With this new cap frame, you can now embroider closer to the brim than ever before! Where the old frame allowed you to embroider 21-24 mm from the brim. This new frame allows you to embroider as close as 18 mm to the brim!
Cap Alignment
Affixing the upper frame simply by pressing allows correct alignment by aligning the center of the frame and the cap.
Anchoring the Brim
The cap curves according to its natural curvature and allows the original shape to be retained without any distortion or scratches after removing the frame. With the old frame, the brim bends or changes shape due to it being secured with a brim clamp. Because of this, people who use the old frame may find that the brim does not return to its original shape even after removing the clamp.
Embroider Closer to the Brim
With this new cap frame, you can now embroider closer to the brim than ever before! Where the old frame allowed you to embroider 21-24 mm from the brim. This new frame allows you to embroider as close as 18 mm to the brim!
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for using Brother PRCF5 3pc Flat Brim All Caps, Frame Hoop, Mounting Bracket, Cap Driver Equipment for PR1055- Includes: One Flat Brim Cap Frame, Hooping Jig, Driver
- Easy to attach and release
- Durable, soft plastic construction
How to Use the Brother PRCF5 Hat Hoop System
n this video, I'll show you how to use your PRCF5 hat hoop to embroider hats! It's a newer hoop by Brother and fits the PRS100, PR1050X and PR1055X.
Brother PRCFH5 Flat Brim Cap Frame Hoop Only for PRCF5 3pc Cap Equipment PR1055X PR1050 PR1000, PR675 PR655 PR650 PR620, PRS100 Babylock Models
 98438: Brother PRCH5 Flat Brim Cap Frame Hoop Only for PRCF5 3pc Cap Equipment |
Our Price: $269.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Embroider more types of hats than before with the easy-to-use "scratch-free" cap frame. You can stitch
an industry-leading 35% closer to the brim (6-10mm), depending on the cap.
Cap Alignment
Affixing the upper frame simply by pressing allows correct alignment by aligning the center of the frame and the cap.
Anchoring the Brim
The cap curves according to its natural curvature and allows the original shape to be retained without any distortion or scratches after removing the frame. With the old frame, the brim bends or changes shape due to it being secured with a brim clamp. Because of this, people who use the old frame may find that the brim does not return to its original shape even after removing the clamp.
Embroider Closer to the Brim
With this new cap frame, you can now embroider closer to the brim than ever before! Where the old frame allowed you to embroider 21-24 mm from the brim. This new frame allows you to embroider as close as 18 mm to the brim!
an industry-leading 35% closer to the brim (6-10mm), depending on the cap.
Cap Alignment
Affixing the upper frame simply by pressing allows correct alignment by aligning the center of the frame and the cap.
Anchoring the Brim
The cap curves according to its natural curvature and allows the original shape to be retained without any distortion or scratches after removing the frame. With the old frame, the brim bends or changes shape due to it being secured with a brim clamp. Because of this, people who use the old frame may find that the brim does not return to its original shape even after removing the clamp.
Embroider Closer to the Brim
With this new cap frame, you can now embroider closer to the brim than ever before! Where the old frame allowed you to embroider 21-24 mm from the brim. This new frame allows you to embroider as close as 18 mm to the brim!
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for using Brother PRCFH5 Flat Brim Cap Frame Hoop Only for PRCF5 3pc Cap Equipment- Includes: One Flat Brim Cap Frame
- For use with hooping jig and driver in PRCF5
- Easy to attach and release
- Durable, soft plastic construction
Brother SASTURDY12 X14" DURKEE Sturdi Split Design Hoop Frame for 6 & 10 Needle PR600 PR620 PR650 PR655 PR670 PR1000 PR1050 PR1050X needs PE Design 11
 98476: Brother SASTURDY12 X14" DURKEE Split Design Hoop Frame for Six & Ten Needle PR650 PR655 PR670 PR1000 PR1050 PR1050X requires PEDesign 11 Software |
Our Price: $249.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
How To Durkee 12” x 14” SturdiFrame Split Design Hoop with PE Design 11 Digitizing Software Tutorial
- Must be used with PE Design 11
- Durkee SturdiFrame 12" x 14" with Instructions
- For use with PR600 and later models
Non-US Warranty: 30 days parts and labor.
Specifications
Brother SASTURDY8X14 8" x 14" DURKEE Split Design Hoop Frame for PRS100 Persona and Babylock Alliance BNAL requires PEDesign11 w/Split Design Software
 98477: Brother SASTURDY8X14 8" x 14" DURKEE Split Design Hoop Frame for PRS100 Persona and Babylock Alliance BNAL requires PEDesign 11 Split Design Software |
Our Price: $199.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
- Must be used with Brother PE Design 11 Software
- Durkee SturdiFrame 8" x 14" with Instructions
- For use with Brother PRS100 Persona or Babylock Alliance BNAL
Non-US Warranty: 30 days parts and labor.
Specifications
we introduced our 8” x 14” and 12” x 14” SturdiFrame Multi-Position Hoops using optional software that will allow the embroiderer to “Split a Design”. the Brother Persona PRS 100 and Baby Lock Alliance increase their sewing field from 8” x 8” to 8” x 14”. The Brother and Baby Lock six (6) needle machines can increase their sewing field from 12” x 8” to 12” x 14”Brother PEDESIGN11 Full Version Software +Durkee STURDYPED12x14" SturdiFrame Split Design Hoop for PR600 PR620 PR650 PR655 PR670 PR1000 PR1050 PR1055
 98478: Brother STURDYPED12 x14" Durkee SturdiFrame Split Design Hoop +required PEDESIGN11 Full Version Software for PR650 PR655 PR670, PR1000 PR1050 PR1055 |
Our Price: $1,599.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Please contact us for availability. Condition: Retail |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval
Special Facts about PE-DESIGN 11
PE-DESIGN 11 is a feature-packed software that offers you so much for your sewing, embroidery, quilting and crafting projects. As a matter of fact, if you have former models of the ScanNCut Home and Hobby Cutting Machines, PE-DESIGN 11 will help you convert the PHX embroidery file format from the Luminaire to FCM for ScanNCut use. PE-DESIGN 11 also offers Wireless LAN Connectivity, exclusive to the Luminaire Innov-ís XP1, which allows a person to transfer designs wirelessly back and forth from your PC to their machine!
PE-DESIGN 11
Packed with powerful and time-saving features, this software is for both the casual hobbyist or the home-based business entrepreneur. Imagine the ability to create your own fonts, stitches and designs once to use many times on hats, pillows, shirts and more. Help reduce the amount of time spent changing threads by using the Intelligent Color Sort feature that will stitch the areas that share one color in groups. Best yet, if you own the Luminaire XP1, enjoy Wireless LAN Connectivity to transfer your embroidery designs and sewing stitches wirelessly.
We have packed this software with so many time-saving features that will help you create more in less time. Imagine the capability to create your own fonts, stitches and designs - just once - to use many times on hats, pillows, shirts, and other fabrics. Reduce the amount of time spent changing threads by using the Intelligent Color Sort feature, which will stitch those areas that share one color in groups.
Brother PE-DESIGN 11 Software Support.
Please Email Brother HERE for Embroidery Software Support or call 1-877-BROTHER (877-276-8437) M-F at 9am to 6pm Eastern Time. They are experiencing an unusually high volume of customer contacts. Know that their team members are at your side and thank you for your patience as you may experience increased response times of 1 to 3 business days.
Brother/Durkee SturdiFrame
Special Facts about PE-DESIGN 11
PE-DESIGN 11 is a feature-packed software that offers you so much for your sewing, embroidery, quilting and crafting projects. As a matter of fact, if you have former models of the ScanNCut Home and Hobby Cutting Machines, PE-DESIGN 11 will help you convert the PHX embroidery file format from the Luminaire to FCM for ScanNCut use. PE-DESIGN 11 also offers Wireless LAN Connectivity, exclusive to the Luminaire Innov-ís XP1, which allows a person to transfer designs wirelessly back and forth from your PC to their machine!
PE-DESIGN 11
Packed with powerful and time-saving features, this software is for both the casual hobbyist or the home-based business entrepreneur. Imagine the ability to create your own fonts, stitches and designs once to use many times on hats, pillows, shirts and more. Help reduce the amount of time spent changing threads by using the Intelligent Color Sort feature that will stitch the areas that share one color in groups. Best yet, if you own the Luminaire XP1, enjoy Wireless LAN Connectivity to transfer your embroidery designs and sewing stitches wirelessly.
We have packed this software with so many time-saving features that will help you create more in less time. Imagine the capability to create your own fonts, stitches and designs - just once - to use many times on hats, pillows, shirts, and other fabrics. Reduce the amount of time spent changing threads by using the Intelligent Color Sort feature, which will stitch those areas that share one color in groups.
Brother PE-DESIGN 11 Software Support.
Please Email Brother HERE for Embroidery Software Support or call 1-877-BROTHER (877-276-8437) M-F at 9am to 6pm Eastern Time. They are experiencing an unusually high volume of customer contacts. Know that their team members are at your side and thank you for your patience as you may experience increased response times of 1 to 3 business days.
Brother/Durkee SturdiFrame
- Must be used with PE Design 11
- Durkee SturdiFrame 12" x 14" with Instructions
- For use with PR650 and later models
- Maximize your embroidery area!
Non-US Warranty: 30 days parts and labor.
Specifications
How To Durkee 12” x 14” SturdiFrame Split Design Hoop with PE Design 11 Digitizing Software TutorialPEDesign 10 Lesson: how to split stitches to separate stitch objects:
How to Split Designs in PE Design 11 Digitizing Software:
How to Use the Sturdi Frame After it is Digitized in PE Design 11:
Brother PEDESIGN 11 Full Version Software Package +Durkee STURDYPED8 X14" Sturdi Frame Split Design Hoop for PRS100 Persona and Babylock Alliance BNAL
 8479: Brother SASTURDY8X14" Durkee Split Design Sturdi Frame Hoop +required PEDESIGN11 Full Version Software for PRS100 Persona and Babylock Alliance BNAL |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: Retail |
Features
Special Facts about PE-DESIGN 11
PE-DESIGN 11 is a feature-packed software that offers you so much for your sewing, embroidery, quilting and crafting projects. As a matter of fact, if you have former models of the ScanNCut Home and Hobby Cutting Machines, PE-DESIGN 11 will help you convert the PHX embroidery file format from the Luminaire to FCM for ScanNCut use. PE-DESIGN 11 also offers Wireless LAN Connectivity, exclusive to the Luminaire Innov-ís XP1, which allows a person to transfer designs wirelessly back and forth from your PC to their machine!
PE-DESIGN 11
Packed with powerful and time-saving features, this software is for both the casual hobbyist or the home-based business entrepreneur. Imagine the ability to create your own fonts, stitches and designs once to use many times on hats, pillows, shirts and more. Help reduce the amount of time spent changing threads by using the Intelligent Color Sort feature that will stitch the areas that share one color in groups. Best yet, if you own the Luminaire XP1, enjoy Wireless LAN Connectivity to transfer your embroidery designs and sewing stitches wirelessly.
We have packed this software with so many time-saving features that will help you create more in less time. Imagine the capability to create your own fonts, stitches and designs - just once - to use many times on hats, pillows, shirts, and other fabrics. Reduce the amount of time spent changing threads by using the Intelligent Color Sort feature, which will stitch those areas that share one color in groups.
Brother PE-DESIGN 11 Software Support.
Please Email Brother HERE for Embroidery Software Support or call 1-877-BROTHER (877-276-8437) M-F at 9am to 6pm Eastern Time. They are experiencing an unusually high volume of customer contacts. Know that their team members are at your side and thank you for your patience as you may experience increased response times of 1 to 3 business days.
Brother/Durkee SturdiFrame
PE-DESIGN 11 is a feature-packed software that offers you so much for your sewing, embroidery, quilting and crafting projects. As a matter of fact, if you have former models of the ScanNCut Home and Hobby Cutting Machines, PE-DESIGN 11 will help you convert the PHX embroidery file format from the Luminaire to FCM for ScanNCut use. PE-DESIGN 11 also offers Wireless LAN Connectivity, exclusive to the Luminaire Innov-ís XP1, which allows a person to transfer designs wirelessly back and forth from your PC to their machine!
PE-DESIGN 11
Packed with powerful and time-saving features, this software is for both the casual hobbyist or the home-based business entrepreneur. Imagine the ability to create your own fonts, stitches and designs once to use many times on hats, pillows, shirts and more. Help reduce the amount of time spent changing threads by using the Intelligent Color Sort feature that will stitch the areas that share one color in groups. Best yet, if you own the Luminaire XP1, enjoy Wireless LAN Connectivity to transfer your embroidery designs and sewing stitches wirelessly.
We have packed this software with so many time-saving features that will help you create more in less time. Imagine the capability to create your own fonts, stitches and designs - just once - to use many times on hats, pillows, shirts, and other fabrics. Reduce the amount of time spent changing threads by using the Intelligent Color Sort feature, which will stitch those areas that share one color in groups.
Brother PE-DESIGN 11 Software Support.
Please Email Brother HERE for Embroidery Software Support or call 1-877-BROTHER (877-276-8437) M-F at 9am to 6pm Eastern Time. They are experiencing an unusually high volume of customer contacts. Know that their team members are at your side and thank you for your patience as you may experience increased response times of 1 to 3 business days.
Brother/Durkee SturdiFrame
- Must be used with PE Design 11
- Durkee SturdiFrame 8" x 14" with Instructions
- For use with PRS100
- Maximize your embroidery space
Non-US Warranty: 30 days parts and labor.
Specifications
PEDesign 10 Lesson: how to split stitches to separate stitch objects:How to Split Designs in PE Design 11 Digitizing Software:
How to Use the Sturdi Frame After it is Digitized in PE Design 11:
Durkee Multi-Needle Master Pack for Babylock Alliance and Brother PRS100: Includes Flat Cap Frame and 7 Piece EZ Frame Set
Durkee Multi-Needle Master Pack for Babylock Alliance and Brother PRS100: Includes Flat Cap Frame and 7 Piece EZ Frame Set |
Our Price: $490.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Combine two (2) Best Selling products from Durkee for multi-needle machines and you get a true Power Pack! This package includes Durkee's World Famous Cap Frame allowing for larger designs and is much easier to use than "cylinder" type devices. Add Durkee's Seven (7) piece EZ Frame set and embroidery just got easier and more fun!
Non-US Warranty: 30 days parts and labor.
Brother XH1466001 Babylock EF99 Extra* Embroidery Hoop 10-5/8" x 16"Inches or 272X408mm that comes Standard with Luminaire XP XP2 XP3 and Solaris BLSA
 99992: Brother XH1466001 Extra Embroidery Hoop 10-5/8 x 16 Inch that comes Stardard with Luminaire XP1, XP2, Babylock Solaris |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Make your projects larger than life with the new Brother Luminaire XP2 10 5/8" X 16" Embroidery Frame, the largest that Brother currently offers. This extra-large Brother Luminaire Embroidery Frame has efficient rubber plates on both sides of the inner frame to hold fabric securely.
Non-US Warranty: 30 days parts and labor.
Specifications
Huge 16" x 11" (41cm x 27cm) Brother embroidery hoop.Part Number: XH1466001
Brother PRVMFLKIT 5x7 Flash Frame Magnetic Hoop Kit Lg with Four Clamps and Driver Arm Complete for PR1055 PR1050 PR1000 PR680 PR670 PR1X Babylocks
 Brother PRVMFLKIT 5" x 7" Flash Frame L Clamp Magnetic Clamps Hoop Kit for PR1055X PR1050X PR1000 PR680W PR670E PRS100 |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
When you buy your first PRVMFLKIT for 5x7 or 4x4, the same driver will work on both the 5x7 and 4x4 frames, so you do not have to buy 2 kits, only the first one.
Brother PRVMFM Introducing the Flash Magnetic Frame System in the ‘L’ Kit. Hoop in a jiffy with four magnets that quickly fit snug into place. You can also rehoop without removing from the machine making changing any project so much quicker! These frames also allow for so much more versatility for larger garments or items, with plenty of room towards the back of the hoop.
Brother PRVMFM Introducing the Flash Magnetic Frame System in the ‘L’ Kit. Hoop in a jiffy with four magnets that quickly fit snug into place. You can also rehoop without removing from the machine making changing any project so much quicker! These frames also allow for so much more versatility for larger garments or items, with plenty of room towards the back of the hoop.
-
Easy Hooping Hoop projects while the hoop is attached to the machine. No need to remove the hoop from the driver/hoop holder and the next project can be “inserted” for the embroidery process.
-
Smooth Hooping Magnets allow for easy fabric placement and adjustment, put two magnets on and slide other magnets to smooth out fabric!
-
Durability Magnets are strong enough to hold thick items like a lush towel yet avoid hoop burn! No force or power/strength needed for hooping.
-
Switch Sizes Easily Can alternate between the 4x4 and 5x7 hoops without changing driver/hoop holder.
-
No Misplacement of Magnets! Magnets only fit where they are supposed to go, so no misplacement of magnets when hooping!
Non-US Warranty: 30 days parts and labor.
Specifications
- Includes: One 5” x 7” frame with four magnets and driver
- Embroider up to 2 MM in thickness
- Compatible with PR680W, PR1055X, PR670E, PR1050X, PR655, PR1000 and PR100e
Brother PRMNGRMKIT1 PR-Series Monogram Kit Compact/S Frame Set, Clamp Frame M PRS100, PR1X, PR650e or older models, PR655/PR670/PR680W, PR1000/PR1050X
 112053: Brother PRMNGRMKIT1 PR-Series Monogram Kit for PRS100, PR1X, PR650e or older models, PR655/PR670/PR680W, PR1000/PR1050X / PR1055X |
Our Price: $649.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
*Financing Available * Synchrony Bank Fixed Payment 0% No Interest Financing with approved credit! Transaction Code 112 Click HERE to Apply Online for Synchrony Bank Credit Approval
Monogram Kit is an embroidery frame kit that allows you to embroider monograms, logos, and small patterns on PR/PR1X, such as small pockets and narrow sleeves.
Genuine Brother Accessory
Monogram Kit is an embroidery frame kit that allows you to embroider monograms, logos, and small patterns on PR/PR1X, such as small pockets and narrow sleeves.
Genuine Brother Accessory
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
For use with Brother PRS100, PR1X, PR650e or older models, PR655/PR670/PR680W, PR1000/PR1050X /PR1055X
Arrow Kangaroo 9301B Ava B #1 PR Embroidery Machine Cabinet White, 4 Drawer, for Brother/Babylock PRS100, PR1X, PR600's PR1000 PR1050, PR1055X
 53039: Arrow Kangaroo 9301B Ava Embroidery Machine Cabinet Brother PRS1 PR6 PR10 PR1050X PR1055X |
Our Price: $1,399.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Now with soft-closing drawers! Sew in comfort with the addition of luxury.
Ava's 4 drawers, 5 shelves and 3 cubbies will give your embroidery customer the amount of storage needed to organize embroidery supplies including thread, hoops and stabilizers in a clean and stylish cabinet. Ava has hospital style casters for easy movability and stability for the embroidery machine. The cut out on the top is perfectly sized for the machine and allows garments to drape during embroidery.
Specify 9301B For: Brother PR600, PR620, PR650, PR655, PR1000, Babylock EMP BMP ENT BNT10 Embroidery Machines 71x27x37”H
Specify 9301J For: Janome MB4 4-Needle Embroidery Machines
Ships RTA Ready To Assemble for less freight cost and possible damage in transit.
Your Ava embroidery cabinet is specifically made for large and heavy industrial embroidery units or any household embroidery machines, as she has reinforced 1” thick top to provide stability for all your embroidering and crafting projects.
Ava features a cut out under your machine to allow fabric to drape down and not bulk under the machine while in use. Two cut out sizes are available to fit Janome/Elna machines and one larger opening to fit
Baby Lock/Brother machines.
Need storage? Ava has it!
3 drawers, 2 cubby holes and 1 thread drawer holds up to 49 standard embroidery spools. Hoops, thread, scissors, seam rippers, rulers and more will all fit neatly in Ava.
Need even more storage?
- 4 shelves on the side provide additional storage for 28 large coned embroidery spools.
- Four large industrial casters allow Ava to be moved with ease, but also lock down for additional stability.
- Durable design with composite construction and white melamine laminate, makes Ava a lasting piece.
- White melamine laminate complements any décor.
To Order Ava:
Model # 9301B (White) fits Baby Lock or Brother machines
*Model # 9301J (White) fits Janome or Elna machines
Assembly requires a standard screwdriver and hammer/mallet. Includes easy-to-follow instructions, plus a friendly toll-free help number.
Ships in 4 cartons via UPS- cannot ship to PO Boxes. Fully assembled is available on special request.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Ava collection.Color: White.Specifically designed for industrial style, multi-needle or household embroidery machines.Reinforced top for stability during use of embroidery machines.Cutout under machine to allow fabric to drape and avoid bulk under machine while in use.Cutout designed for babylock and brother multi-needle embroidery machines.Top size: 1".Style: Contemporary.Base Finish: White.Top Finish: White.Hardware Finish: Brushed Nickel.Base Material: Manufactured wood.Overall Height - Top to Bottom: 35".Overall Width - Side to Side: 35.5".Overall Depth - Front to Back: 23.5".Overall Product Weight: 188 lbs Color: WhiteCabinet Dimensions: 35 1/2 ”W x 23 1⁄2” ”D x 35 ”H
2 Drawer Dimensions: 26 3⁄4” W x 16” D x 2” H
Single Drawer Dimensions: 13” W x 16 1⁄4” D X 5 1⁄2” H
2 Cubby Dimensions: 13” W x 22 3⁄4” D x 7” H
Storage Shelf Dimension: 3 1/4” W x 21 3/4” D X 6” H
Click Here to View the Arrow Ava Instruction Manual(.PDF)
Assembly of the Ava Cabinet Part 1
Assembly of the Ava Cabinet Part 2
Brother PRBW1 Babylock EPBW1 Metal/Plastic Rotary L Bobbins Thread Winder PRS100 PR1X PR600's PR670 PR680 PR1000 PR1050 PR1055, BL EMP6 BMP6 BMP8 BMP9
 16229: Bobbin Thread Winder Babylock EPBW1(Brother PRBW1) for PRS100 PR600 PR670 PR1000 PR1050 PR1055 |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Includes Spool Pins, Cone Holders, Thread Spool Retention Caps, Bobbin Case Tension Weight, for Brother PQ1500, S6200A, PR600, PR650, PR1000, PRBW1 and any other sewing or embroidery machine without bobbin winder that takes standard L metal or plastic bobbins.
Brother PR Bobbin Winders are for Brother PR600 PR620 PR650 PR655 PR1000, and Babylock 6-10 Needle Embroidery Machines that do not have a built in bobbin winder... for color bobbins matching top thread.
May your bobbins always be full!
Note: Brother PR600 PR650 PR1000 Bobbin Thread Specifications from the Instruction Manuals: "When winding the bobbin, be sure to use cotton or spun polyester bobbin thread (between 74 dtex/2 and 100 dtex/2)."
Bobbin winder for the PR600 PR620 PR650 PR1000, Babylock and any L Bobbin Rotary Sewing machine, home or industrial for sewing, quilting and embroidery.
Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors, and using up bobbin thread on spools and cones.
Bobbin winder for the 6 needle series. Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors.
Can also be used with other brands of sewing machines.
Made to work with the following machines and others:
Brother PR 600, PR 600II, PR 620, PR650
Babylock EMP 6, BMP 6, BMP 8
However, the following bobbin types do not fit on this machine:
Singer Centaur II
Singer Futura
Husqvarna Viking bobbin 412 56 15-45 (green)
Husqvarna Viking bobbin 412 09 75-45
Husqvarna Viking bobbin 412 06 12-45
Pfaff Creative Vision
M Style Industrial Sewing Machine Bobbins.
Class 15 metal or plastic, SA156 Type
Bobbins and Machines Below will work with this electric bobbin winder
*Alternative Part Numbers for L bobbins Include 616513, 100376051, 111533200, 100376-053, SA159, sa163, 4160555-01, A9117-007-000 & H12413002 (AC 48794B657074, 48794B657084)
Fits Singer 20U, Consew 2033, Artidsan 2053, Yamata 20U63
Fits most high speed straight stitch and zigzag industrial sewing machines except upholstery machines
Fits brother PQ1500, Juki TL-98, Janome 1600P high speed, straight stitch portable sewing machines
Fits Riccar and domestic rotary machines.
Fits Alphasew model P20U33-3.
Fits Baby Lock models BL3000, BL4000, BL5000, BL7000, BLQP, EMP6, BMP6, BMP8, and Quilter's Choice Professional(BLQCP).
Fits Bernina Bernette models 330, 340, 430, 440, and 1000.
Fits Brother model PQ-1500 and PQ-1500S
Fits Consew models 99, 103, 105, 199R, 210, 220, 230, 231, 2230 and 292.
Fits Elna models 100, 101, 102, 103, 104 and 1000.
Fits Juki models TL98Q, TL98QE, DDL-227, DDL-555, DDL-5530, and DDL-5550.
Fits Riccar models 414, 500, 515, 525, RM540, R551, R552, 606, 650, R700, R751, 805, 888, 2600, 2950, 3400, 3600, 4001, 4003, 8400, 8500, 9150, 9160, 9600, 9700, 9800, 9900, 2800/3300, 2900/3500, 555FA, 666FA, 800R, 806/807, 808E, 906E, RE571, RE581/RE591, and RM570.
Fits Singer models 115-1, 188K, 191D300A, 20U, 20U13, 20U33, 206K, 206K25, 251, 281, 306K, 306K25, 306W, 319, 319K, 491D200, 491D300, 591D200A, and 591D300A.
See more HERE
Quilted Block using the Entrepreneur Pro PR1000e and PRBW Bobbin Winder. You can create Quilted Blocks on the Entrepreneur Pro PR1000e that look beautiful on both the front and back. The secret is to change bobbins each time the top thread color changes. In this video, Anna Aldmon shows you how easy it is to change a single needle design to a multi-needle design by adding stops for bobbin changes.
Brother PR Bobbin Winders are for Brother PR600 PR620 PR650 PR655 PR1000, and Babylock 6-10 Needle Embroidery Machines that do not have a built in bobbin winder... for color bobbins matching top thread.
May your bobbins always be full!
Note: Brother PR600 PR650 PR1000 Bobbin Thread Specifications from the Instruction Manuals: "When winding the bobbin, be sure to use cotton or spun polyester bobbin thread (between 74 dtex/2 and 100 dtex/2)."
Bobbin winder for the PR600 PR620 PR650 PR1000, Babylock and any L Bobbin Rotary Sewing machine, home or industrial for sewing, quilting and embroidery.
Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors, and using up bobbin thread on spools and cones.
Bobbin winder for the 6 needle series. Set your bobbin thread vertically on this stand and wind bobbins on this independent bobbin winder. Perfect for customizing bobbin thread colors.
Can also be used with other brands of sewing machines.
Made to work with the following machines and others:
Brother PR 600, PR 600II, PR 620, PR650
Babylock EMP 6, BMP 6, BMP 8
However, the following bobbin types do not fit on this machine:
Singer Centaur II
Singer Futura
Husqvarna Viking bobbin 412 56 15-45 (green)
Husqvarna Viking bobbin 412 09 75-45
Husqvarna Viking bobbin 412 06 12-45
Pfaff Creative Vision
M Style Industrial Sewing Machine Bobbins.
Class 15 metal or plastic, SA156 Type
Bobbins and Machines Below will work with this electric bobbin winder
*Alternative Part Numbers for L bobbins Include 616513, 100376051, 111533200, 100376-053, SA159, sa163, 4160555-01, A9117-007-000 & H12413002 (AC 48794B657074, 48794B657084)
Fits Singer 20U, Consew 2033, Artidsan 2053, Yamata 20U63
Fits most high speed straight stitch and zigzag industrial sewing machines except upholstery machines
Fits brother PQ1500, Juki TL-98, Janome 1600P high speed, straight stitch portable sewing machines
Fits Riccar and domestic rotary machines.
Fits Alphasew model P20U33-3.
Fits Baby Lock models BL3000, BL4000, BL5000, BL7000, BLQP, EMP6, BMP6, BMP8, and Quilter's Choice Professional(BLQCP).
Fits Bernina Bernette models 330, 340, 430, 440, and 1000.
Fits Brother model PQ-1500 and PQ-1500S
Fits Consew models 99, 103, 105, 199R, 210, 220, 230, 231, 2230 and 292.
Fits Elna models 100, 101, 102, 103, 104 and 1000.
Fits Juki models TL98Q, TL98QE, DDL-227, DDL-555, DDL-5530, and DDL-5550.
Fits Riccar models 414, 500, 515, 525, RM540, R551, R552, 606, 650, R700, R751, 805, 888, 2600, 2950, 3400, 3600, 4001, 4003, 8400, 8500, 9150, 9160, 9600, 9700, 9800, 9900, 2800/3300, 2900/3500, 555FA, 666FA, 800R, 806/807, 808E, 906E, RE571, RE581/RE591, and RM570.
Fits Singer models 115-1, 188K, 191D300A, 20U, 20U13, 20U33, 206K, 206K25, 251, 281, 306K, 306K25, 306W, 319, 319K, 491D200, 491D300, 591D200A, and 591D300A.
See more HERE
Quilted Block using the Entrepreneur Pro PR1000e and PRBW Bobbin Winder. You can create Quilted Blocks on the Entrepreneur Pro PR1000e that look beautiful on both the front and back. The secret is to change bobbins each time the top thread color changes. In this video, Anna Aldmon shows you how easy it is to change a single needle design to a multi-needle design by adding stops for bobbin changes.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Using the Optional Bobbin Winder Instructions on Pages 277-281 in Brother PR Manuals.Compatible Standard L bobbins fit the following machines
Compatible with Babylock Sewing Machine Models:
BL500A (Jane), BL3000, BL4000, BL5000, BL5020, BL7000, BLQP, EMP6 & Nouvelle 1500S
Compatible with Bernette Sewing Machine Models:
320, 330, 340, 430 & 440
Compatible with Bernina Sewing Machine Models:
1000, 1000+ & 1001.
Compatible with Brother Sewing Machine Models:
8015, PQ1500, PR-600II, PR-620, XL700 & XL703.
Compatible with Consew Sewing Machine Models:
210, 220, 230, 2230, 231, 99, 103, 105, 292 & 199R.
Compatible with Elna Sewing Machine Models:
100, 101, 102, 103, 104 & 1000.
Compatible with Husqvarna Viking Sewing Machine Models:
2780, 2840 & Mega Quilter.
Compatible with Juki Sewing Machine Models:
DDL-555, DDL-227, DDL-5530, DDL-5550, TL-98E, TL-98P, TL-98Q, TL-98QE, TL-2000Qi & TL-2010Q.
Compatible with Necchi Sewing Machine Models:
543 & Mirella.
Compatible with Pfaff Sewing Machine Models:
1200 Grand Quilter.
Compatible with Some Rotary Kenmore Sewing Machine Models.
Compatible with Riccar Sewing Machine Models.
777, R550, R570, R572, R650, R651, R751, RE571, RE640 & 2900.
Compatible with Singer Sewing Machine Models:
20U, 20U73, 20U73B, 20U83 and 20U83B, 251, 281, 20U33, 319, 206K, 306K & 306W.
Compatible with Riccar Sewing Machine Models:
414, 420, 500, 515, 525, 551, 555FA, 606, 666FA, 800R, 805, 806, 807, 808E, 888, 906E, 2600, 2800, 2900, 2950, 3300, 3400, 3500, 3600, 4001, 4003, 8400, 8500, 9150, 9160, 9600, 9700, 9800, 9900, R551, R552, R650, R651, R750, R751, RE571, RE570, RE580, RE581, RE591, RE640, RM540 & RM570.
Compatible with White Sewing Machine Models:
8000. - See more HERE
Brother PR Carla Reale 4 Hour 6 Videos USB for PR600 PR650 PR655 PR670 PR680 PR1000 PR1050X PR1055X, BabyLock BL6-10 Multi Needle Embroidery Machines
 44563: Brother PR 4 Hour 6 Videos on USB for PR6-PR10 BabyLock BL6-10 by Carla Reale |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Only available with purchase of Brother PR machine, These videos will help you with the original Brother PR600, PR620, PR650, PR650E, PR655E, PR1000, PR1000E and Babylock EMP, BMP, ENT, and BNT Multi Needle Embroidery Machines, all made by Brother.
All of the video was shot in 1080p HD and will play on any computer with USB port "The USB don’t auto play. They have to have either windows media player or realplayer installed on their computer, find the file through explorer, right click on the file, then choose “ open with.” Carla Reale"
Watch at Sample of the Video Here:
Sample Video of Automatic Multi Needle Threading, Hat Driver Attachment, and Wiper Error Message for Brother PR Embroidery Machines
Notes from Educator and Technician Carla Reale
"My name is Carla Reale. I have been an educator and technician on the six and ten needle machines since they came out on the market over eight years ago. I have created a set of videos. The set is valued at $499.00. You can take the class in the comfort of your own home, at your own pace - you can just replay it to review. A full list of topics covered in all of the videos. To see a sample video, and for a full list of covered topics
Dealer Review:
"These videos have been fantastic! Our customers are able to take these home, and use their machines right off the bat with no further instruction. They have also eliminated most common user issues, and greatly reduced the number of phone calls to the store regarding procedures, error messages, etc. We used to do a hands-on class that took 2-3 hours, then, because there is so much information to absorb, customers would forget, and we would have to redo the classes which costs time and money." Bob Barnes
Customer, Ann Windle writes:
"I wanted to pass along a quick note to comment on the videos that you made to help a person in the learning process of using the Brother Embroidery machine. Can I tell you that they are the BEST! It’s like having you in my workroom teaching me all I need to know about the machine! I sooo appreciate them. If I have a question on anything…I know I can go to them and get my answers. I have brought out the hat video several times when I have to use the hat attachment… just to make sure I haven’t forgotten to do a step, so that everything runs smoothly! FANTASTIC! I seriously can’t THANK YOU enough for the work that has went into making these videos! I sincerely appreciate them! A much satisfied customer" Ann Windle, Columbus Ohio.
Help is HERE!
This set of six videos will take you from box to embroidery, and beyond!!
Basic Training takes you from unpacking to embroidery.
The Don’t Panic video is dedicated to trouble-shooting and maintenance.
HATS! covers (pun intended) attaching the cap driver & hooping a hat.
Camera, Etc. is dedicated to all of the camera features in the ten-needle machines
& the sixth video covers Fast Frames® & Jumbo Hoop.
Best of all, you can take these classes, at your pace, in the privacy of your home!
When you are ready to review a procedure, it's at your fingertips!
YOU WON'T HAVE TO HUNT THROUGH A GAZILLION YOU TUBE VIDEOS, HAVE TO SEARCH FOR HELP ONLINE, OR WAIT FOR THE STORE TO OPEN.
If you get stuck or get an error message, get the correct answer immediately. No waiting until you can find someone to help you. Time really is too precious to waste!
When you put the flash drive into your computer, it will assign it a letter, depending on how many drives and devices you have in your computer. When I put it in my computer, it comes up a USB G: but your computer may use another letter.
Double click on the drive to see the contents. The videos are in mp4 format so you should be able to double click on any of the names and that should start the video. If it does not start, then check to make sure you have a program on your computer that will play videos. Most computers come with one installed on there, (like Windows Media Player) but you can download a free program that will play them if you do not have one on your computer. Carla
All of the video was shot in 1080p HD and will play on any computer with USB port "The USB don’t auto play. They have to have either windows media player or realplayer installed on their computer, find the file through explorer, right click on the file, then choose “ open with.” Carla Reale"
Watch at Sample of the Video Here:
Sample Video of Automatic Multi Needle Threading, Hat Driver Attachment, and Wiper Error Message for Brother PR Embroidery Machines
Notes from Educator and Technician Carla Reale
"My name is Carla Reale. I have been an educator and technician on the six and ten needle machines since they came out on the market over eight years ago. I have created a set of videos. The set is valued at $499.00. You can take the class in the comfort of your own home, at your own pace - you can just replay it to review. A full list of topics covered in all of the videos. To see a sample video, and for a full list of covered topics
Dealer Review:
"These videos have been fantastic! Our customers are able to take these home, and use their machines right off the bat with no further instruction. They have also eliminated most common user issues, and greatly reduced the number of phone calls to the store regarding procedures, error messages, etc. We used to do a hands-on class that took 2-3 hours, then, because there is so much information to absorb, customers would forget, and we would have to redo the classes which costs time and money." Bob Barnes
Customer, Ann Windle writes:
"I wanted to pass along a quick note to comment on the videos that you made to help a person in the learning process of using the Brother Embroidery machine. Can I tell you that they are the BEST! It’s like having you in my workroom teaching me all I need to know about the machine! I sooo appreciate them. If I have a question on anything…I know I can go to them and get my answers. I have brought out the hat video several times when I have to use the hat attachment… just to make sure I haven’t forgotten to do a step, so that everything runs smoothly! FANTASTIC! I seriously can’t THANK YOU enough for the work that has went into making these videos! I sincerely appreciate them! A much satisfied customer" Ann Windle, Columbus Ohio.
Help is HERE!
This set of six videos will take you from box to embroidery, and beyond!!
Basic Training takes you from unpacking to embroidery.
The Don’t Panic video is dedicated to trouble-shooting and maintenance.
HATS! covers (pun intended) attaching the cap driver & hooping a hat.
Camera, Etc. is dedicated to all of the camera features in the ten-needle machines
& the sixth video covers Fast Frames® & Jumbo Hoop.
Best of all, you can take these classes, at your pace, in the privacy of your home!
When you are ready to review a procedure, it's at your fingertips!
YOU WON'T HAVE TO HUNT THROUGH A GAZILLION YOU TUBE VIDEOS, HAVE TO SEARCH FOR HELP ONLINE, OR WAIT FOR THE STORE TO OPEN.
If you get stuck or get an error message, get the correct answer immediately. No waiting until you can find someone to help you. Time really is too precious to waste!
When you put the flash drive into your computer, it will assign it a letter, depending on how many drives and devices you have in your computer. When I put it in my computer, it comes up a USB G: but your computer may use another letter.
Double click on the drive to see the contents. The videos are in mp4 format so you should be able to double click on any of the names and that should start the video. If it does not start, then check to make sure you have a program on your computer that will play videos. Most computers come with one installed on there, (like Windows Media Player) but you can download a free program that will play them if you do not have one on your computer. Carla
Non-US Warranty: 30 days parts and labor.
Specifications
Listed below are the topics that are covered in the 6 & 10 needle machine videos.Basic Training (I needed two videos for the Basic Training)
- Unpacking & Setup
- On/Off Switch
- Attaching the Carriage Arm
- Threading
- Needle Threading
- Oiling the Hook
- Bobbin Case
- Main Screen
- Test Pattern
- Placing Hoop on Machine
- On-Screen Editing
- Changing Design Colors
- Combine Design Elements
- Changing Spool Assignments
- Going Backward through the Design
Don’t Panic (Trouble-shooting & Maintenance)
- Changing Needles
- Oil Needle Bars
- Cleaning Under Needle Plate
- Cleaning Tension Assemblies
- Test Pattern
- Check Upper & Lower Thread Error Message
- Bobbin Case Adjustment
- Wiper Error
- Trim Sensor Motor Error
Camera, Etc.
- Center & Position
- Scan to Position
- Multi-Hooping Projects
- Connect in the Hoop
Fast Frames© & Jumbo Hoop
Procedures for testing Fast Frames & a Jumbo Hoop project from start to finish.
Hats!
Putting cap driver on the machine, hooping caps, and putting cap frame onto the driver.
Also machine set-up for caps.
Brother PR 4in1 Embroidery Hoops 2.3x1.5" PRH60mm, 4x4" PRH100mm, 5x7" PRH180mm, 8x12" PRH300mm PR600 PR620 PR650E PR1000E Babylock EMP BMP8 ENT BNT10
 24590: Brother PR 4in1 Embroidery Hoops 2.3x1.5" PRH60mm, 4x4" PRH100mm, 5x7" PRH180mm, 8x12" |
Availability: Retail Store Only Condition: New In Box |
Features
Includes:
- 300 mm Embroidery Reg Hoop
- 180 mm Embroidery Hoop
- 100 mm Embroidery Hoop
- 60 mm Embroidery Hoop
Brother Compatibility Chart for PRS100, PR670E, PR1050X and Brother Hoops that Work with each model.
Non-US Warranty: 30 days parts and labor.
Brother PR10 8in1 Embroidery Hoops PRH60mm PRH100mm PRH130 PRH180mm PRH300mm PRF300 PRPH360 PRPJF360
 Brother PR 8in1 Embroidery Hoops PRH60mm PRH100mm PRH130 PRH180mm PRH300mm PRF300 PRPH360 PRPJF360 |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: New In Box |
Features
Includes:
- 360mm Jumbo Frame 14x14" Embroidery Hoop PRPJF360
- 360mm Extra Large 12x14" Embroidery Hoop PRPH360
- 300mm Bulky Flat 8x12" Embroidery Hoop PRF300
- 300 mm Stardard 8x12" Embroidery Reg Hoop PRH300
- 180 mm 5x7" Embroidery Hoop PRH180
- 130 mm 5x7" Embroidery Hoop PRH130
- 100 mm Embroidery Hoop PRH100
- 60 mm Embroidery Hoop PRH60
Brother Compatibility Chart for PRS100, PR670E, PR1050X and Brother Hoops that Work with each model.
Non-US Warranty: 30 days parts and labor.
Brother PRCF3 Cap Equipment 2.5x5* Hat Hoop Frame, Mounting Gauge, Driver &Tools for PRS100 PR600II PR620 PR650 PR655 PR670 PR680 PR1000 PR1050 PR1055
 |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!
Also includes allen driver tools for adjusting driver to machine, instruction book and raised insert for needle plate to prevent hat from moving up and down with the needle.
The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Note: Will not work on the PR600, but will work on the newer PR670e For Use With: Entrepreneur Pro X PR1050X, Entrepreneur PR650, Entrepreneur PR650e, Entrepreneur PR655, Entrepreneur Pro PR1000e, PR600II, PR620, PR-655C, PRS100. ompatible with Version 2.10 Only. The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Brother PR Hoop Compatibility Chart(.PDF)
Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores
Also includes allen driver tools for adjusting driver to machine, instruction book and raised insert for needle plate to prevent hat from moving up and down with the needle.
The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Note: Will not work on the PR600, but will work on the newer PR670e For Use With: Entrepreneur Pro X PR1050X, Entrepreneur PR650, Entrepreneur PR650e, Entrepreneur PR655, Entrepreneur Pro PR1000e, PR600II, PR620, PR-655C, PRS100. ompatible with Version 2.10 Only. The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
PRCF3 Cap Frame and Driver Set - PR Multi-needle Series, 5" x 2.5"- Perfect for embroidering larger designs on caps with a generous embroidery area
- 5" x 2.4" Embroidery field
- Convenient snap-on hoop
Brother PR620 Cap Video on YouTube
How to set up the cap frame driver
How to set up the cap frame
How to install the cap frame driver
Brother PRCFH2 Extra Narrow Cap Holding Hat Hoop Frame for Driver1 2x5" Embroidery Above Brim for Original PR600 PR620 +Babylock 6 Needle Machines
 |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This Hoop Works With Brother 600, 600II, 620, Babylock EMP6, BMP8 6 needle embroidery machines Driver 1 Only, not on PR650 Driver 2, or PR1000 Driver.
The cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm.
The cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Brother PRCFH3 Cap Holding Hoop Frame Only for PRCF3 2.5x5in on PRS100 PR1X PPR600II PR620 PR650 PR655 PR670 PR680 PR1000 PR1050 PR1055, Babylock
 22472:Brother PRCFH3 Cap Holding Hoop Frame Only for PRCF3 2.5x5in Sew Field on PRS100 PR600II PR620 PR650 PR655 PR670 PR1000 PR1050 PR1055 and Babylock |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
On Order! You will still need the hat frame Driver attachment for the machine and cap mounting bracket from PRCF3 3pc set to operate on hats and caps. Having an extra cap frame allows you to be sewing on one frame whole loading a second hat on the extra frame to save time.
PRCFH3 Cap Frame Only. Compatible with PR Version 2.10+ Only (PR6 EMP8 2.5x5" Sewing Area) &.Driver 2. Perfect for 2nd project while first is being embroidered. Larger 2.5"x5" Embroidery Above Hat Brim for PR650 and Babylock BMP9 Driver 2, 6 Needle Embroidery Machines v2.1
The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Note: Compatible with PR6 Version 2.10 Only.
For Use With: PR600II, PR620, PR600IIUPG, Entrepreneur® PR650, Entrepreneur® Pro PR1000e, Entrepreneur® PR650e, Entrepreneur® PR655, PR-655C
PRCFH3 Cap Frame Only. Compatible with PR Version 2.10+ Only (PR6 EMP8 2.5x5" Sewing Area) &.Driver 2. Perfect for 2nd project while first is being embroidered. Larger 2.5"x5" Embroidery Above Hat Brim for PR650 and Babylock BMP9 Driver 2, 6 Needle Embroidery Machines v2.1
The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Note: Compatible with PR6 Version 2.10 Only.
For Use With: PR600II, PR620, PR600IIUPG, Entrepreneur® PR650, Entrepreneur® Pro PR1000e, Entrepreneur® PR650e, Entrepreneur® PR655, PR-655C
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
How To Set Up the Cap Frame DriverHow to Set Up the Cap Frame
Brother PRCH3-XE2268001 Cap Driver C Assembly Only for PRCF3 Hat Equipment on PRS100 to PR680 & Babylock Embroidery Machines, Not for Original PR600*
 |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
PRCH3-XE2268001 Cap Driver Assembly for Brother PRS100, PR600II, PR620, PR650, PR650E, PR670E.
Works with the following cap frame, XC7477051: PRCFH2, Cap Frame B, Advanced Cap Frame
Works with the following cap frame, XC7477051: PRCFH2, Cap Frame B, Advanced Cap Frame
Non-US Warranty: 30 days parts and labor.
Specifications
How to install the cap frame driverBrother PRCL1 Demo 3 Piece Tubular Hoop Cylinder Frame (Not a Hat Cap Frame). Driver, and Gauge for PRS100 PR600's PR670, PR1000, PR1050X PR1055, BL
 14172: Brother PRCL1 Demo 3 Piece Tubular Hoop Cylinder Frame (Not a Hat Cap Frame). Driver, and Gauge for PRS100 PR600's PR670, PR1000, PR1050X PR1055, BL |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: Floor Model |
Features
The cylinder frame embroidery area is 90mm x 80mm (approximately 3.5” x 3”)
For Use With:PRS100, PR-600, PR600II, PR620, Entrepreneur® PR650, Entrepreneur® PR650e, Entrepreneur® PR655, PR-655C, PR670, PR1000, PR1050
This Brother PRCL1 Cylinder & Driver Frame Set allows you to stitch fashion and logo embroidery on long narrow pant legs, sleeves and other locations with ease. The Brother PRCL1 Cylinder & Driver Frame Set embroidery area is 90mm x 80mm, approximately 3.5” x 3”. Use the Brother PRCL1 Cylinder & Driver Frame Set with Version 2.10 only.
For Use With:
- PR-600
- PR-600II
- PR-620
- PR600IIUPG
- Entrepreneur PR-650
- PR650E
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
How to install the cap frame driver
Brother PRCL1 3pc Tubular Hoop Equipment (Not a Hat Cap Frame) Includes Driver, Gauge, Cylinder Frame PRS100 PR620 PR670 PR680 PR1000 PR1050 PR1055 BL
14172: Brother PRCL1 Tubular Hoop Cylinder Frame, Driver, Gauge for PRS100 PR600 PR1000 PR1050 |
Our Price: $999.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The cylinder frame set allows you to stitch fashion and logo embroidery on long narrow trouser legs, sleeves and other locations with ease.
The cylinder frame embroidery area is 90mm x 80mm (approximately 3.5” x 3”)
For Use With:PRS100, PR-600, PR600II, PR620, Entrepreneur® PR650, Entrepreneur® PR650e, Entrepreneur® PR655, PR-655C, PR670, PR1000, PR1050
This Brother PRCL1 Cylinder & Driver Frame Set allows you to stitch fashion and logo embroidery on long narrow pant legs, sleeves and other locations with ease. The Brother PRCL1 Cylinder & Driver Frame Set embroidery area is 90mm x 80mm, approximately 3.5” x 3”. Use the Brother PRCL1 Cylinder & Driver Frame Set with Version 2.10 only.
For Use With:
The cylinder frame embroidery area is 90mm x 80mm (approximately 3.5” x 3”)
For Use With:PRS100, PR-600, PR600II, PR620, Entrepreneur® PR650, Entrepreneur® PR650e, Entrepreneur® PR655, PR-655C, PR670, PR1000, PR1050
This Brother PRCL1 Cylinder & Driver Frame Set allows you to stitch fashion and logo embroidery on long narrow pant legs, sleeves and other locations with ease. The Brother PRCL1 Cylinder & Driver Frame Set embroidery area is 90mm x 80mm, approximately 3.5” x 3”. Use the Brother PRCL1 Cylinder & Driver Frame Set with Version 2.10 only.
For Use With:
- PR-600
- PR-600II
- PR-620
- PR600IIUPG
- Entrepreneur PR-650
- PR650E
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
How to install the cap frame driver
Brother PRCLH1 Cylinder Frame Hoop for PRCL1 on PR1055X PR1050X PR1000 PR680 PR670 PR650 PR620 PR600 PRS100 Babylock Multi Needle Embroidery Machines
 Brother PRCLH1 Cylinder Frame Hoop for PRCL1 on PR1055X PR1050X PR1000 PR680 PR670 PR650 PR620 PR600 PRS100 |
Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: New In Box |
Features
*Requires Your Existing or Prior Purchase of Brother PRCL1. Tubular Hoop Cylinder Frame with Driver Attachment, and Hoop Setting Gauge for PR1000, PR655, PR650, PR620 (or PR600 Upgraded for Cylinder Frame Use)
The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Fits the brother PR620 / PR650 / PR1000 Cylinder Frame Unit.
For Use With: PR-600, PR-600II, PR-620, PR600IIUPG, Entrepreneur® PR-650, Entrepreneur® PR650e
Perfect for setting up 2nd project while the first is being embroidered.
Note: Compatible with Version 2.10 Only.
The advanced cap frame set gives you a generous area for cap embroidery. Now it’s easy to add logos or your favorite phrase to a wide array of caps. The cap frame embroidery area is 130mm x 60mm, approximately 5” wide x 2.4” tall.
Fits the brother PR620 / PR650 / PR1000 Cylinder Frame Unit.
For Use With: PR-600, PR-600II, PR-620, PR600IIUPG, Entrepreneur® PR-650, Entrepreneur® PR650e
Perfect for setting up 2nd project while the first is being embroidered.
Note: Compatible with Version 2.10 Only.
Non-US Warranty: 30 days parts and labor.
Specifications
Brother PRCLP45B Arm D Driver, Tubular Center Clamp Hoop, Shoe Sides, Dog Collars, Name Tapes on PR655 PR670 PR1000 PR1050X PR1055X
 |
Our Price: $599.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Embroidery frame holder D & Clamp frame S.
This frame will be used for embroidering specially shaped items that cannot be held in a traditional frame, such as shoes and gloves.
.8x1.8" for Logos, Flags, Initials, Names, Numbers. New! Arm D and Clamp frame lightbox (PRCLP45B) (Approx .8” x 1.8”) Easily embroider on the side of a shoe, shoe tongue, cuffs, gloves, shirt pockets or even a backpack! This frame allows you to expand your embroidery possibilities.
Ideal for the sides of a shoe or shoe tongue, these frames are designed with exceptional grip strength to hold the items in place during embroidering. The arm size is designed small enough to fit down into most shoe sides and still have an adequate stitch field for logos, flags, initials, names, numbers etc. The frame has an aggressive non-slip surface to hold leather and nylon secure during embroidery. It works well with backpacks, gloves, pockets, hats, cuffs and more!
*For Use With: Entrepreneur Pro PR655, PR655C, and Entrepreneur Pro PR1000/PR1000e with firmware 4.10 or later.
Embroidery with Clamp Frame on Shoes on the Side.
Embroidery with Clamp Frame on a Collar for Pets.
Brother PR Hoop Compatibility Chart(.PDF)
Brother Clamp Frame Kit 1
Ideal for the sides of a shoe or shoe tongue, these frames are designed with exceptional grip strength to hold the items in place during embroidering. The arm size is designed small enough to fit down into most shoe sides and still have an adequate stitch field for logos, flags, initials, names, numbers etc. The frame has an aggressive non-slip surface to hold leather and nylon secure during embroidery. It works well with backpacks, gloves, pockets, hats, cuffs and more!
Kit 1 - PRCLP45B - Includes arm D mounting arm and forward-facing frame
We recommend using the Brother Clamp Frame Kit 2 with Kit 1 - Kit 2 is not included with the purchase of Kit 1
Kit 2 - PRCLP45LR - 45° Left & Right for sides of shoes (does not include arm D mounting arm)
Embroidery Area:
45mm x 24mm per frame
Kit 1 can be used by itself, however Kit 2 can not be used without Kit 1 as arm D mounting arm is required.
Compatible with Brother PR Series machine models:
PR655, PR670e, PR1000, PR1000e & PR1050x
Part number PRCLP45B
This frame will be used for embroidering specially shaped items that cannot be held in a traditional frame, such as shoes and gloves.
.8x1.8" for Logos, Flags, Initials, Names, Numbers. New! Arm D and Clamp frame lightbox (PRCLP45B) (Approx .8” x 1.8”) Easily embroider on the side of a shoe, shoe tongue, cuffs, gloves, shirt pockets or even a backpack! This frame allows you to expand your embroidery possibilities.
Ideal for the sides of a shoe or shoe tongue, these frames are designed with exceptional grip strength to hold the items in place during embroidering. The arm size is designed small enough to fit down into most shoe sides and still have an adequate stitch field for logos, flags, initials, names, numbers etc. The frame has an aggressive non-slip surface to hold leather and nylon secure during embroidery. It works well with backpacks, gloves, pockets, hats, cuffs and more!
*For Use With: Entrepreneur Pro PR655, PR655C, and Entrepreneur Pro PR1000/PR1000e with firmware 4.10 or later.
Embroidery with Clamp Frame on Shoes on the Side.
Embroidery with Clamp Frame on a Collar for Pets.
Brother PR Hoop Compatibility Chart(.PDF)
Brother Clamp Frame Kit 1
Ideal for the sides of a shoe or shoe tongue, these frames are designed with exceptional grip strength to hold the items in place during embroidering. The arm size is designed small enough to fit down into most shoe sides and still have an adequate stitch field for logos, flags, initials, names, numbers etc. The frame has an aggressive non-slip surface to hold leather and nylon secure during embroidery. It works well with backpacks, gloves, pockets, hats, cuffs and more!
Kit 1 - PRCLP45B - Includes arm D mounting arm and forward-facing frame
We recommend using the Brother Clamp Frame Kit 2 with Kit 1 - Kit 2 is not included with the purchase of Kit 1
Kit 2 - PRCLP45LR - 45° Left & Right for sides of shoes (does not include arm D mounting arm)
Embroidery Area:
45mm x 24mm per frame
Kit 1 can be used by itself, however Kit 2 can not be used without Kit 1 as arm D mounting arm is required.
Compatible with Brother PR Series machine models:
PR655, PR670e, PR1000, PR1000e & PR1050x
Part number PRCLP45B
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for Brother PRCLP45B Arm D Driver, Tubular Center Clamp Hoop, Shoe Sides, PR655 PR670 PR1000 PR1050XSoccer Shoe Clamp is designed to allows embroidery on soccer shoe sides and tongues. Its exceptional grip strength will hold the shoe in place during embroidering. The clamp body is rail mounted , (it attaches to the drive rail of the panagraph) to ensure maximum rigidity on the machine. The window size is deep. The window size is designed small enough to fit down into most shoe sides and still have an adequate sewing field for logos, flags, initials, names, numbers etc. The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing. Embroidery on finished shoe.
Brother PRCLP45LR Left & Right Clamp Hoops w/o Arm D Driver for .8x1.8" Designs on Larger Shoe Sizes for PR6 670E PR1000 1050 1055 Embroidery Machines
 |
Our Price: $599.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This frame will be used for embroidering specially shaped items that cannot be held in a traditional frame, such as shoes and gloves. Used to embroider shoes when size is greater than 27 cm (US9/UK8/EUR42).
.8x1.8" Designs, Logos, Numbers. New! Right and Left Clamp frames (PRCLP45LR) (Approx. 8" x 1.8") These frames allow you to embroider on shoes larger than a women’s size 10 and men’s size 8. Arm D is sold sperately.
The right and left clamp frames expand embroidery capabilities even further allowing embroidery on larger shoe sizes. (Arm D not included)
Owning Arm D is required before using this hoop set, because that hoop set includes the Machine's inserting clamp.
For Use With Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e, Entrepreneur® PR-650, Entrepreneur® PR650e, Entrepreneur® PR655E
Brother PR Hoop Compatibility Chart(.PDF)
.8x1.8" Designs, Logos, Numbers. New! Right and Left Clamp frames (PRCLP45LR) (Approx. 8" x 1.8") These frames allow you to embroider on shoes larger than a women’s size 10 and men’s size 8. Arm D is sold sperately.
The right and left clamp frames expand embroidery capabilities even further allowing embroidery on larger shoe sizes. (Arm D not included)
Owning Arm D is required before using this hoop set, because that hoop set includes the Machine's inserting clamp.
For Use With Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e, Entrepreneur® PR-650, Entrepreneur® PR650e, Entrepreneur® PR655E
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manua for Brother PRCLP45LR Left & Right Clamp Frame HoopsSoccer Shoe Clamp is designed to allows embroidery on soccer shoe sides and tongues. Its exceptional grip strength will hold the shoe in place during embroidering. The clamp body is rail mounted , (it attaches to the drive rail of the panagraph) to ensure maximum rigidity on the machine. The window size is deep. The window size is designed small enough to fit down into most shoe sides and still have an adequate sewing field for logos, flags, initials, names, numbers etc. The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing. Embroidery on finished shoe.
Brother PRCLPM1 Tubular Clamp Frame 4x4" Patch Hoop M +Arm Connector Frame Holder D for PR1055X, PR1050X, PR1000, PR670E, PR680W, PR1X, Babylocks
 79435: Brother PRCLPM1 Tubular Clamp Frame 4x4" Patch Hoop M +Arm Connector Frame Holder D for PR1055X, PR1050X, PR1000, PR670E, PR680W, PRS100, Babylocks |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
See Hoop Compatibility Chart Update Your PR6, PR10 to latest firmware version to insure hoop recognition.
The unique construction of this 4”x4” frame provides strong holding power, yet without ‘hoop burn’ on your fabric. The click and snap design allows you to hoop your project easily in seconds – so much easier than using standard, two-piece frames! The inside of one side of the frame has a smooth, rubber grip, and the other side has a textured fabric grip – the combination of these two surfaces against your fabric helps keep your project in place, without damaging the fibers. The 4” x 4” size is ideal for monogramming, baby items, boat and canvas items.
*For use with: Brother PR1050X for Now. Will be compatible with Brother PR1000E as soon as new version firmware update is posted on Support. Brother.com to recognize the new hoops.
*For Use With: Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e (Software ver.4.15 is available.), Entrepreneur® PR655 (Software ver.4.25 is available.), PRS100 (Softwae version 1.30) with these free firmware upgrades available on support.brother.com
Brother PR Hoop Compatibility Chart(.PDF)
The unique construction of this 4”x4” frame provides strong holding power, yet without ‘hoop burn’ on your fabric. The click and snap design allows you to hoop your project easily in seconds – so much easier than using standard, two-piece frames! The inside of one side of the frame has a smooth, rubber grip, and the other side has a textured fabric grip – the combination of these two surfaces against your fabric helps keep your project in place, without damaging the fibers. The 4” x 4” size is ideal for monogramming, baby items, boat and canvas items.
*For use with: Brother PR1050X for Now. Will be compatible with Brother PR1000E as soon as new version firmware update is posted on Support. Brother.com to recognize the new hoops.
*For Use With: Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e (Software ver.4.15 is available.), Entrepreneur® PR655 (Software ver.4.25 is available.), PRS100 (Softwae version 1.30) with these free firmware upgrades available on support.brother.com
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
Brother PRCLPM1 Clamp Frame Installation ManualShowing Brother PRCLP45B Arm D Driver, with Optional Center Clamp Shoe Hoop .8x1.8", Embroidery with Clamp Frame on Shoes on the Side.
Embroidery with Optional Center Clamp Shoe Hoop on a Collar for Pets.
Brother PR Hoop Compatibility Chart(.PDF)
Brother PRCW1 4 Fabric Cutting Needles +Cutwork Software +Firmware UPG Upgrade for PR650, PR655E & PR1000/E, NOT for Newer Models PR1050/55, PR670/680
 |
Our Price: $499.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Use the included designs to embroider and cut beautiful appliqués, patches, and cutwork, or use your own PEDESIGN® NEXT embroidery design software upgraded to v9.2 to create your own cutwork designs.
*Brother PRCW1 Cutwork Kit works on any PR650, PR650E, PR1000 or PR1000E Machines using the 30 Included Designs, or Designs and Appliques Built into your Machine, without ever having to go to or use your PC Computer or PE Design Software, unless you want to create your own cutwork designs and appliques in PE Design. Brother PRCW1 Cutwork Kit is Free Standing and does not require any software installation on your computer, only the firmware upgrade to the machine's main PC board.
Expand the creative embroidery options of your PR650 Series or PR1000 Series machine – with NEW cutwork capabilities! This versatile kit upgrades both your Entrepreneur® PR-Series machine, and your existing PE-DESIGN® software, giving you the ability to create and customize beautiful embroidery cutwork. With this kit, you can set up your multi-needle embroidery machine to both embroider AND cut – without having to change needles in between. Use the included designs to embroider and cut beautiful appliqués, patches, and cutwork, or use the included PE-DESIGN® NEXT embroidery design software to create your own, custom cutwork designs! This kit offers 21 included outline cutting shapes, for appliqués, patches, and other cutwork projects.
For Use With: Entrepreneur® PR-650, Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e, Entrepreneur® PR650e
*Brother PRCW1 Cutwork Kit works on any PR650, PR650E, PR1000 or PR1000E Machines using the 30 Included Designs, or Designs and Appliques Built into your Machine, without ever having to go to or use your PC Computer or PE Design Software, unless you want to create your own cutwork designs and appliques in PE Design. Brother PRCW1 Cutwork Kit is Free Standing and does not require any software installation on your computer, only the firmware upgrade to the machine's main PC board.
Expand the creative embroidery options of your PR650 Series or PR1000 Series machine – with NEW cutwork capabilities! This versatile kit upgrades both your Entrepreneur® PR-Series machine, and your existing PE-DESIGN® software, giving you the ability to create and customize beautiful embroidery cutwork. With this kit, you can set up your multi-needle embroidery machine to both embroider AND cut – without having to change needles in between. Use the included designs to embroider and cut beautiful appliqués, patches, and cutwork, or use the included PE-DESIGN® NEXT embroidery design software to create your own, custom cutwork designs! This kit offers 21 included outline cutting shapes, for appliqués, patches, and other cutwork projects.
For Use With: Entrepreneur® PR-650, Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e, Entrepreneur® PR650e
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Click HERE for More You Tube Videos on Brother PRCW1 Cutwork Needles and Software
Brother PRF300 12x8" Flat Frame Hoop for Bulky Items for PR600 PR600II PR620 PR650 PR1000, Babylock BMP-FF for EMP6 BMP8 BMP9 ENT10 Embroidery Machine
 Brother PRF300 12x8" Flat Frame Hoop for Bulky Items for PR600 PR600II PR620 PR650 PR1000, Babylock BMP-FF for EMP6 BMP8 BMP9 ENT10 Embroidery Machine |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Compatible without upgrade package.
The unique design of this flat frame prevents fabric bunching when embroidering any bulky material, even on the back of jackets.
The flat frame embroidery area is 300mm x 200mm, approximately 12” x 8”
Brother PR Hoop Compatibility Chart(.PDF)
The unique design of this flat frame prevents fabric bunching when embroidering any bulky material, even on the back of jackets.
The flat frame embroidery area is 300mm x 200mm, approximately 12” x 8”
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRH100, Babylock EPF100, 100x100mm, 4x4" Embroidery Hoop XC5964051 for PRS100, PR600, PR620, PR650, PR655, PR670, PR1000, PR1050. PR1050X & BL
 11790: Brother PRH100, Babylock EPF100, 100x100mm, 4x4" Embroidery Hoop XC5964051 for PRS100, PR600, PR620, PR650, PR655, PR670, PR1000, PR1050. PR1050X & BL |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
100 mm Embroidery Hoop for:
- Brother PR600 / 600II / 600C
- Brother PR620 / PR620II/ PR650/PR655/PR670
- Brother PR1000 / PR1000E/ PR1050/PR1055X
- Babylock EMP6 / BMP6
- Babylock BMP8 / BMP9 / BND9
- Babylock ENT10 / BNT10 / BNT10L
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRH180 Babylock EPF180 180x130mm 5x7 XC5959051 Embroidery Hoop Frame PRS100 PR600 620 650 670 680,1000,1050,1055,BL EMP6 BMP8 BMP9 ENT10 BMP10
 11791: Brother PRH180 Babylock EPF180 180x130mm 5x7 XC5959051 Embroidery Hoop Frame PRS100 PR600 620 650 670 680,1000,1050,1055,BL EMP6 BMP8 BMP9 ENT10 BMP10 |
Our Price: $89.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
- 180 mm Embroidery Hoop for PR-600
Product Description
Embroidery Hoops for a variety of applications.
Large 5-1/8" x 7-1/8"
This hoop fits the following embroidery machines:
Brother brand embroidery machines:
PR600, PR600II, PR620, PR650, PR1000
Baby Lock brand embroidery machines:
EMP6, BMP6, BMP8, BMP9
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRH300 Babylock EFP300 8x12 Embroidery Hoop XC5954051 for PR600 PR620 PR650 655 PR670 680 PR1000 PR1050PR1055, Bl EMP6 BMP8 BMP9 ENT10 BNT10
 Brother PRH300 Babylock EFP300 8x12 Embroidery Hoop XC5954051 for PR600 PR620 PR650 655 PR670 680 PR1000 PR1050PR1055, Bl EMP6 BMP8 BMP9 ENT10 BNT10 |
Our Price: $89.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
- 300 mm Embroidery Hoop for PR-600
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRH60 Babylock EPF60 60x40mm Embroidery Hoop Frame XC5969051 for PRS100 PR600 620 650 655 670 680 1000 1050 1055, BABYLOCK
 Brother PRH60 Babylock EPF60 60x40mm Embroidery Hoop Frame XC5969051 for PRS100 PR600 620 650 655 670 680 1000 1050 1055, BABYLOCK |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: New In Box |
Features
- 60 mm Embroidery Hoop for PR-600
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRHCK1 Compact 4Hoop Tubular Freearm Frames 1.25x1.75 Round, 2x2 Square, 1x3 Oblong, 1.3x1.3 Portrait +Embroidery Arm E for PR6 PR10 Babylock*
 Brother PRHCK1 Compact 4 Hoop Frames Kit 1.25x1.75" Round, 2x2" Square, 1x3" Oblong, 1.3x1.3" Portrait +Embroidery Arm for PRS100, PR6 PR10, Babylock* |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Included with PRS100, Designed specifically for the PR1050X but also works on PR6 models, this Compact Frame Kit includes four mini frames, ranging in size from 1.25" x 1.75" to 2" x 2". These frames allow you to easily add embroidery to smaller areas such as pants, shirt and jacket pockets; shirt sleeves; and craft items. These are same mini frames that Persona E1 embroidery customers loved, now available for the PR1050X multi-needle embroidery machine!
Included are: a 1.25" x 1.75" Round frame, a 2" x 2" Square frame, a 1" x 3" Oblong frame and a 1.3" x 1.3" portrait layout frame, plus an embroidery frame arm.
*For use with: PR1050X. Will be compatible with Brother PR1000E as soon as new version firmware update is posted on Support.Brother.com to recognize the new hoops.
Brother PR Hoop Compatibility Chart(.PDF)
Included are: a 1.25" x 1.75" Round frame, a 2" x 2" Square frame, a 1" x 3" Oblong frame and a 1.3" x 1.3" portrait layout frame, plus an embroidery frame arm.
*For use with: PR1050X. Will be compatible with Brother PR1000E as soon as new version firmware update is posted on Support.Brother.com to recognize the new hoops.
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRHSL200 3x8" Sleeve Frame Tubular Hoop for PR1X 650 655 670 680 PR1000 1050 1055 Babylock Multi Needle Embroidery Machines w/Hoop Recognition
 79439: Brother PRHSL200 3x8" Sleeve Frame Hoop for PR6 PR10 Babylock Embroidery Machines |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
This 3” x 8” frame is the perfect size for embroidering difficult to access areas such as jacket sleeves, pant legs, kids’ T-shirts and baby rompers. It features a unique ‘wing’ design in which the adjustable screw is placed at one corner, allowing the frame to hold your fabric more securely.
For use with: PR1X, PR650 655 670 680 PR1000 1050 1055, Babylock Multi Needle Embroidery Machines with Hoop Recognition
Brother PR Hoop Compatibility Chart(.PDF)
*Instruction Manual for Brother PRHSL200 3x8" Sleeve Frame Hoop for PR6 PR10 Babylock
For use with: PR1X, PR650 655 670 680 PR1000 1050 1055, Babylock Multi Needle Embroidery Machines with Hoop Recognition
Brother PR Hoop Compatibility Chart(.PDF)
*Instruction Manual for Brother PRHSL200 3x8" Sleeve Frame Hoop for PR6 PR10 Babylock
Non-US Warranty: 30 days parts and labor.
Brother PRMH50 2x2" Tubular Magnetic Clamp Hoop Only for Arm, on Entrepreneur 6-Plus PR670E, PR680W to PR1055X
 84481: Brother PRMH50 2x2" Magnetic Hoop Only for Arm, on Entrepreneur 6-Plus PR670E to PR1055X |
Our Price: $119.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The Magnet Hoop is the perfect set for those small hard-to-embroider items like cuffs, collars, delicate materials and even leather. The hoop holds your material tightly so you can embroider without movement and with virtually no hoop burn. They easily snap in and out to improve your productivity.
For use with: Entrepreneur 6-Plus PR670E
For use with: Entrepreneur 6-Plus PR670E
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for Brother PRMH50 Magnetic Hoop Only for Arm on Entrepreneur 6-Plus PR670EBrother PRMHA50 2x2" Tubular Magnetic Hoop Clamp Frame and Arm Set for PR1X, PR670E, PR680W, PR1055X
 84480: Brother PRMHA50 2x2" Magnetic Hoop Clamp Frame and Arm Set for PR670E to PR1055X |
Our Price: $179.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
The 2" x 2" Magnet Hoop and Arm Set is the perfect set for those small hard-to-embroider items like cuffs, collars, delicate materials and even leather. The hoop holds your material tightly so you can embroider without movement and with virtually no hoop burn. They easily snap in and out to improve your productivity. Purchase additional Magnet Hoops to do multiple embroideries using a single arm.
For use with: Entrepreneur 6-Plus PR670E to PR1055X
Brother PR Hoop Compatibility Chart(.PDF)
For use with: Entrepreneur 6-Plus PR670E to PR1055X
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for Brother PRMHA50 2x2" Magnetic Hoop Clamp Frame and Arm Set for PR670E to PR1055XBrother PRNSTD2 New Style Metal Roller Stand, Hoop Hooks, 2 Wood Shelves & Table Top, Cap Holder, for PRS100 PR600's PR1000 PR1050X PR1055X, Babylock
 63967: Brother PRNSTD2 New Style Stand +Wood Table Top for PRS100 PR600 PR1000 PR1050X PR1055X & Babylock |
Our Price: $1,099.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Machine Stand
- This height-adjustable stand helps provide a stable base for your machine. Includes pre-drilled holes for mounting hat frame holder gauge jig, locking clamps for two of the machine feet, hoop holder dividers on top shelf, flat bottom shelf, 4 locking roller casters, plus 4 stabilization feet, all for less vibration..
Designed for use with the Persona PRS100 and all PR-Series machines, this attractive metal stand helps provide a stable base for your machine. Similar to our PRNSTD stand (but modified for use with the PRS100, in addition to the PR1000, PR1050X and PR600 Series), it has a wide table area with rounded edges and extra storage for all your large frames, such as the cap frame. The stand secures your machine with locks to resist vibration while in use. Locking wheels allow for easy moving and transportation, and the legs are height-adjustable. The stand has space for the cap frame, which is ideal for prepping hats for embroidery. The large shelf has supportive dividers for convenient hoop storage, and provides storage for accessories, instruction books and small supplies.
For Use With: PRS100, PR-600, PR-600C, PR600II, PR600IIUPG, PR650ECBR, PR655CCL, PRS100, Entrepreneur® PR650, Entrepreneur® PR650e, Entrepreneur® PR655, Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e, PS1000, PR1050X, PR1055X
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Instruction Manual for Brother PRNSTD2 New Style StandBrother XF6865001 Replacement Hoop Hook for Hanging Embroidery Frames on the Side Pegboards of PRNSTD2 Roller Stand
 Brother XF6865001 Replacement Hook for Hanging Hoops on Side of PRNSTD2 Stand |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
If you buy four hooks and use monthly Coupon Code (3 capital letter abreviation for month 5) in checkout it will cover the USPS shipping charge on $60 worth of Hooks. Call 866-244-2726 for support.
Genuine Brother replacement. Can be used as a replacement for lost/damaged hooks or you can add this one to your storage setup. Sold individually. Stand sold separately and can be purchased here.
Genuine Brother replacement. Can be used as a replacement for lost/damaged hooks or you can add this one to your storage setup. Sold individually. Stand sold separately and can be purchased here.
Non-US Warranty: 30 days parts and labor.
Brother PRPBF1 4x12" Continuous Border Frame Clamp Hoop for PR1000 PR1050X PR1055X, Requires PRPUGK1 Upgrade w/ Pattern Connect to use Camera, Snowman
 26741: Brother PRPBF1 4x12" Continuous Border Frame Clamp Hoop for PR1000 PR1050X PR1055X, Requires PRPUGK1 Upgrade w/ Pattern Connect to use Camera, Snowman |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Designed for long objects such as table runners. Re-hoop your fabric without removing the frame. Just release the latches, slide the fabric to the next embroidery position, and relock. Must be used with Arm B embroidery frame holder included in the PR-1000.
For Use With: Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
The larger 4" x 12" (100mm x 300mm) continuous border hoop allows you to use larger border designs and accommodates multiple repeats of smaller designs. You can embroider designs faster, with less time spent hooping the fabric.The Brother PRPBF1 Border Frame is designed for long objects such as table runners. Use the Brother PRPBF1 Border Frame to rehoop your fabric without removing the frame, just release the latches and slide the fabric to the next embroidery position, and relock. The Brother PRPBF1 Border Frame must be used with the Arm B embroidery frame holder included with the PR-1000 and PR-1000E.
Brother PRPCF1 3pc Wide Cap Hat Equipment: Driver, Hooping Gauge, Hat Hoop Frame 270° 2.5x14 Wide for PR1000 PR1050 PR1055 +Babylock 10Needle Machines
 Brother PRPCF1 3pc Cap Hat Equipment: Driver, Gauge, Hoop 270° 2.5x14" Wide for PR1000 1050 1055 |
Our Price: $1,189.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: New In Box |
Features
In stock! Also includes allen driver tools for adjusting driver to machine, instruction book and raised insert for needle plate to prevent hat from moving up and down with the needle.
Provides expanded embroidery area, allowing you to stitch caps virtually ear-to-ear. Total embroidery area is 14" x 2 3/8" (60mm x360mm). Includes14"x 2 3/8" (60mm x360mm) wide cap frame, cap frame driver, and mounting jig.
Embroider popular cap styles quickly and easily with this cap frame attachment.
The embroidery wide area is a generous 360mm wide x up to 60mm high
For Use With: Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e
Brother PR Hoop Compatibility Chart(.PDF)
Provides expanded embroidery area, allowing you to stitch caps virtually ear-to-ear. Total embroidery area is 14" x 2 3/8" (60mm x360mm). Includes14"x 2 3/8" (60mm x360mm) wide cap frame, cap frame driver, and mounting jig.
Embroider popular cap styles quickly and easily with this cap frame attachment.
The embroidery wide area is a generous 360mm wide x up to 60mm high
For Use With: Entrepreneur® Pro PR-1000, Entrepreneur® Pro PR1000e
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Specifications
Cap Frame Set User ManualThe Brother PRPCF1 Wide Cap Frame Kit provides an expanded embroidery area, allowing you to stitch caps virtually ear-to-ear. Total embroidery area with the Brother PRPCF1 Wide Cap Frame Kit is 14" x 2 3/8" (60mm x360mm).
How To Set Up the Cap Frame Driver
How to Set Up the Cap Frame
How to install the cap frame driver
Brother PRPCFH4 Wide Cap Frame Only, 2-3/8X14" 360mmX60mm Hat Hoop for PRPCF1 on PR1000, PR1000E, PR1050X, PR1055X, Babylock 10 Needle Emb. Machines
 Brother PRPCFH4 Wide Cap Frame 2-3/8X14" 360mmX60mm Hat Hoop PR1000, PR1000E, PR1050X, |
Our Price: $329.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
For PR1000 and PR1000E, and BabyLock ENT10 and BNT only!
The Brother PRPCFH4 Wide Cap Frame is perfect for setting up a second project while the first is being embroidered. Providing an expanded embroidery area, the Brother PRPCFH4 Wide Cap Frame allows you to stitch caps virtually ear to ear. This Brother PRPCFH4 Wide Cap Frame has a total embroidery area of 14" x 2 3/8" (360mm x 60mm). Includes 14" x 2 3/8" (60mm x360mm) wide cap frame only.
Note: You must have the cap hat driver assembly that fits onto the machine, plus the cap hat frame holder (gauge) to hoop the cap or hat, before using. The cap hat frame by itself does not fit directly on the machine without the cap hat driver being installed first.
The Brother PRPCFH4 Wide Cap Frame is perfect for setting up a second project while the first is being embroidered. Providing an expanded embroidery area, the Brother PRPCFH4 Wide Cap Frame allows you to stitch caps virtually ear to ear. This Brother PRPCFH4 Wide Cap Frame has a total embroidery area of 14" x 2 3/8" (360mm x 60mm). Includes 14" x 2 3/8" (60mm x360mm) wide cap frame only.
Note: You must have the cap hat driver assembly that fits onto the machine, plus the cap hat frame holder (gauge) to hoop the cap or hat, before using. The cap hat frame by itself does not fit directly on the machine without the cap hat driver being installed first.
Non-US Warranty: 30 days parts and labor.
Brother PRPH360 Large Hoop Frame 8x14 360X200mm PR1000 PR1050 PR1055, Use Embroidery Arm A and 30x15" Extension Table Support for Flat Hoops
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: Retail |
Features
ETA within 30 Days! For PR1000 and Babylock ENT, BNT 10 Needle Machines ONLY.
Create extra large designs without the need to reposition your fabric. Total embroidery area is 14” x 8” (360mm x 200mm).
For Use With: Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e
Brother PR Hoop Compatibility Chart(.PDF)
Create extra large designs without the need to reposition your fabric. Total embroidery area is 14” x 8” (360mm x 200mm).
For Use With: Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother XC5721051 Large Hoop Grid Only 180mm x 130mm, 5X7 Inch for PR and Babylock Multi Needle Embroidery Machines
 Brother XC5721051 Large Hoop Grid Only 180mm x 130mm, 5X7 Inch for PR and Babylock Multi Needle Embroidery Machines |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Embroidery Sheet Replacement Grid For Brother & Baby Lock Multi-Needle 180mm x 130mm Hoop
Non-US Warranty: 30 days parts and labor.
Specifications
Guaranteed to fit Brother and Babylock 5x7" Embroidery Hoop Machine Models:BMP6, BMP8, BMP9, BMT6, BMV10 Valiant, BMVT10, BMY6 Array, BND9, BNT10, EMP6
Guaranteed to fit Brother Embroidery Machine Models with 5x7" Hoop:
PR1000, PR1055X, PR600, PR600II, PR600C, PR620, PR650, PR670E Entrepreneur, PR680W
Brother PRPJF360 14x14" Sq 360x360mm Reversible Jumbo Frame Hoop for Split Designs on PR1000, PR1050X, PR1055X, Babylock
 Brother PRPJF360 14x14" Sq 360x360mm Reversible Jumbo Frame Hoop for PR1000, PR1050X, PR1055X, Babylock |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Requires Brother PE Design or other software on your computer to split the design in two, before running both sides in your 14x14" hoop. Embroider up to 7x14" then turn around for another 7x14" for a merged 14x14" design.
One of the largest frames available for a multi-needle embroidery machine. Perfect for making wall hangings, jacket backs and other large designs. Must be used with Arm B embroidery frame holder and table included in the PR-1000.
For Use With: Entrepreneur® Pro PR-1000, PR1000E, Babylock ENT10, BNT10 machines ONLY.
One of the largest frames available for a multi-needle embroidery machine. Perfect for making wall hangings, jacket backs and other large designs. Must be used with Arm B embroidery frame holder and table included in the PR-1000.
For Use With: Entrepreneur® Pro PR-1000, PR1000E, Babylock ENT10, BNT10 machines ONLY.
Non-US Warranty: 30 days parts and labor.
Brother PRPQF200 8x8" 200mmX200mm Square Hoop Quilting Frame for PR1-6-10 Using Embroidery Arm B 30x14" Extension Table for Traditional Quilt Blocks
 Brother PRPQF200 8x8" 200mmX200mm Square Hoop Quilting Frame for PR6-10 Using Embroidery Arm B and 30x14" Extension Table for Traditional Quilt Blocks |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Create quilt patterns more efficiently. Sized to fit traditional quilting squares. Must be used with Arm B embroidery frame holder and table included in the PR-1000.
For Use With: Entrepreneur® Pro PR-1000 PR1000E, Babylock ENT10 BNT10 ONLY
Brother PR Hoop Compatibility Chart(.PDF)
For Use With: Entrepreneur® Pro PR-1000 PR1000E, Babylock ENT10 BNT10 ONLY
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRPRFK1 Babylock ENRFS 3in1 Round Circular Hoops 4, 5 and 6" Frame Kit with Arm C for PR1000, PR1050X, PR1055X, PR655 PR670E PR680W, Babylocks
 Brother PRPRFK1 Babylock ENRFS 3in1 Round Circular Hoops 4, 5 and 6" Frame Kit with Arm C for PR1000, PR1050X, PR1055 PR655 and Babylock Models |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Note: "Circular hoops only work with the C frame holder that comes in the kit, containing the C frame holder and 3 circular hoops that being 4,5,6. The circular hoops can be used with or without the extension table. However, they are usually used without the table as they are perfect for the left chest front of shirts etc...." Paulette B.
Includes one 4", one 5", and one 6" round frame. Perfect for stitching round designs, and for designs that require more stability. Includes Arm C Embroidery Frame Holder, which must be used with all frames in this kit.
For Use With: Entrepreneur® Pro PR-1000 and PR655, Not for PR650, PR620, PR600.
Brother PR Hoop Compatibility Chart(.PDF)
Includes one 4", one 5", and one 6" round frame. Perfect for stitching round designs, and for designs that require more stability. Includes Arm C Embroidery Frame Holder, which must be used with all frames in this kit.
For Use With: Entrepreneur® Pro PR-1000 and PR655, Not for PR650, PR620, PR600.
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRSBH1 4x7” 100x180mm Border Frame Hoop +50 Designs on USB Stick, for Persona PRS100, Babylock Alliance BNAL Embroidery Machines, Use Arm "A"
 63964: Brother PRSBH1 4x7” Border Frame Hoop +50 Designs USB for Persona PRS100, Babylock Alliance BNAL |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
In Stock as of 7/12/214” x 7” Border Frame
- This frame allows you to re-hoop your fabric, without removing the frame. Simply release the latches, slide your fabric to the new position, and relock the frame. Included are the 4”x7” border frame and a CD containing 50 border embroidery designs. Arm shown in picture is the arm that comes with your machine and is not included with the border frame.
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRSCLP45B Shoe Clamp Sides or Tongue Frame Small Set with Driver for Persona PRS100, Babylock BNAL, Single Needle PR Embroidery Machines
 79436: Brother PRSCLP45B Shoe Clamp Frame S Set for Persona PRS100, Babylock BNAL, Single Needle PR Embroidery Machines |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Ideal for the sides of a shoe or shoe tongue, this frame set is designed with exceptional grip strength to hold items in place during embroidering. The arm size is designed small enough to fit down into most shoe sides and still have an adequate stitch field for logos, flags, initials, names, numbers etc. The frame has an aggressive non-slip surface to hold leather and nylon secure during embroidery. It works well with backpacks, gloves, pockets, hats, cuffs and more.
For use with: PRS100
For use with: PRS100
Non-US Warranty: 30 days parts and labor.
Brother PRSCLPM1 Tubular Clamping Frame & Arm Set M, 4x4" Hoop for PRS100 Persona, Babylock BNAL, Janome MB4, MB7
84515: Brother PRSCLPM1 Tubular Clamping Frame & Arm Set M, 4x4" Hoop for PRS100 Persona, Babylock BNAL, Janome MB4, MB7 |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
This 4” x 4” frame, ideal for monogramming baby items, canvas, and even delicate fabrics while providing strong holding power, yet virtually without hoop burn on your fabric. The click and snap design allows you to hoop your project easily in seconds. The inside of the frame has a smooth rubber grip on one side and textured fabric grip on the other – the combination of these two surfaces helps keep your project in place, minimizing damage to fabric or fibers.
SKU: PRSCLPM1
For use with:Persona PRS100
SKU: PRSCLPM1
For use with:Persona PRS100
Non-US Warranty: 30 days parts and labor.
Brother PRSFLH200 8x8” Flat Quilt Hoop Frame Persona PRS100, Babylock Alliance BNAL Embroidery Machines
 63963: Brother PRSFLH200 8x8” Flat Quilt Hoop Frame Persona PRS100/BL Alliance |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
8” x 8” Flat Frame
- Holds thick materials such as jacket backs, and helps you create 8” x 8” quilt squares more efficiently.This flat frame is ideal for bulky projects such as jacket backs, as the frame helps prevent excess fabric from interfering with your embroidery. It is also useful for efficiently creating 8”x8” quilt squares.
For Use With: PRS100 and Babylock Alliance.
Non-US Warranty: 30 days parts and labor.
Brother PRSFMK1 Free Motion Kit for PRS100 Persona/BL Alliance BNAL: Foot Control, 21x25 Ext Table, Grip Hoop, ModeAuto Activator, Fabric Guard, Video
 |
Our Price: $599.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This optional free-motion quilting kit enables you to add free hand stippling designs to quilts and create your own free hand sewing designs and artwork. This optional Brother PRSFMK1 Free Motion Kit for PRS100 Persona free-motion quilting kit enables you to add free hand stippling designs to quilts and create your own free hand sewing designs and artwork. Do freemotion quilting and personal artwork with the Brother PRSFMK1 Free Motion Kit for PRS100 Persona.
For use with: Brother Persona PRS100 and Babylock Alliance BNAL Single Needle Embroidery Machines Only.
PRS100 Free Motion Kit Accessory. This optional free-motion quilting kit enables you to add free hand stippling designs to quilts and create your own free hand sewing designs and artwork.
*Brother PRS100 Activate the Free Motion Mode. Instruction:
1. Go to Brother support website download the update for PRS100.
2. Update your PRS100 software. (Please Note: New needle guard cover included automatically activates the Free Motion mode, so you don't have to use these tests)
Brother PRS100 Free Motion Mode test.
*Brother PRSFMK1C Free Motion Kit Installation. Brother PRS100 Persona (same as Europe Brother VR) embroidery Machine Free Motion Kit (PRSFMK1C) Insatllation. The video that contains a song playing in the background on a radio so we removed the sound track.
For use with: Brother Persona PRS100 and Babylock Alliance BNAL Single Needle Embroidery Machines Only.
PRS100 Free Motion Kit Accessory. This optional free-motion quilting kit enables you to add free hand stippling designs to quilts and create your own free hand sewing designs and artwork.
*Brother PRS100 Activate the Free Motion Mode. Instruction:
1. Go to Brother support website download the update for PRS100.
2. Update your PRS100 software. (Please Note: New needle guard cover included automatically activates the Free Motion mode, so you don't have to use these tests)
Brother PRS100 Free Motion Mode test.
*Brother PRSFMK1C Free Motion Kit Installation. Brother PRS100 Persona (same as Europe Brother VR) embroidery Machine Free Motion Kit (PRSFMK1C) Insatllation. The video that contains a song playing in the background on a radio so we removed the sound track.
Non-US Warranty: 30 days parts and labor.
Brother PRSH44 PRS100 Compact Hoop Frame 1.25x1.75" for Persona PRS100, Babylock Alliance BNAL Embroidery Machines
 64052: Brother PRSH44 PRS100 Compact Hoop Frame 1.25x1.75" for Persona PRS100 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This compact frame allows you to easily add embroidery to small items such as jeans and pants pockets. This frame is included with the PRS100, and also available for separate purchase.
For Use With: PRS100
For Use With: PRS100
Non-US Warranty: 30 days parts and labor.
Brother PRSH50 Compact Hoop Frame 2x2" for Persona PRS100, Babylock Alliance BNAL Embroidery Machines
 64053: Brother PRSH50 Compact Hoop Frame 2x2" for Persona PRS100, BL Alliance |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This square compact frame allows you to easily add embroidery to small items such as jeans and pants pockets. This frame is included with the PRS100, and also available for separate purchase.
For Use With: PRS100
For Use With: PRS100
Non-US Warranty: 30 days parts and labor.
Brother PRSH70 Compact Hoop Frame 1.3x3" for Persona PRS100, Babylock Alliance BNAL Embroidery Machines
 64054: Brother PRSH70 Compact Hoop Frame 1.3x3" for Persona PRS100, BL Alliance |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The Brother Persona PRS100 Embroidery Hoop PRSH70 1.3 x 1.3 is ideal for smaller projects. Use the Brother Persona PRS100 Embroidery Hoop PRSH70 1.3 x 1.3 with monograms and on baby items to get the best quality embroidery. AllBrands carries all accessories for the Brother Persona PRS100 including Brother Persona PRS100 Embroidery Hoop PRSH70 1.3 x 1.3.
This oblong compact frame allows you to embroider shirt pockets, kids’ shirtsleeves and other smaller items with ease. This frame is included with the PRS100, and also available for separate purchase.
Brother PR Hoop Compatibility Chart(.PDF)
This oblong compact frame allows you to embroider shirt pockets, kids’ shirtsleeves and other smaller items with ease. This frame is included with the PRS100, and also available for separate purchase.
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRSHV PRS100 Compact Hoop Frame 3x1.3" for Persona PRS100, Babylock Alliance BNAL Embroidery Machines
 64055: Brother PRSHV PRS100 Compact Hoop Frame 3x1.3" for Persona PRS100, BL |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The Brother Persona PRS100 Embroidery Hoop PRSH70 1.3 x 1.3 is ideal for smaller projects. Use the Brother Persona PRS100 Embroidery Hoop PRSH70 1.3 x 1.3 with monograms and on baby items to get the best quality embroidery. AllBrands carries all accessories for the Brother Persona PRS100 including Brother Persona PRS100 Embroidery Hoop PRSH70 1.3 x 1.3.
This oblong compact frame allows you to embroider shirt pockets, kids’ shirtsleeves and other smaller items with ease. This frame is included with the PRS100, and also available for separate purchase.
Brother PR Hoop Compatibility Chart(.PDF)
This oblong compact frame allows you to embroider shirt pockets, kids’ shirtsleeves and other smaller items with ease. This frame is included with the PRS100, and also available for separate purchase.
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRSK2 Starter Kit, PRS100, PR600-PR1050x, Babylock Embroidery Machines
 25501: Brother PRSK2 Starter Kit, PRS100, PR600-PR1050x, Babylock Embroidery Machines |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Includes cutaway and tearaway stabilizer backings, spray, lint brush, pin point oiler, starter threads, needles, pre-wound bobbins, caps, Dakota Collectibles designs,, etc.
Perfect for your at-home embroidery business. This kit contains: 2 12-pack organ needles, 1 adhesive spray, 6 king size spools, 1000 design pack from Dakota, 1 lint brush, 2 blue caps, 1 pen oiler, 1 20-pack white pre-wound L bobbins (PRWB135), 1 15"x10 yrd Tear-Away stabilizer roll and 1 15x10 yrd Cut-Away stabilizer r
This kit contains: 2 12-pack organ needles, 1 adhesive spray, 6 king size spools, 1000 design pack from Dakota, 1 lint brush, 2 blue caps, 1 pen oiler, 1 20-pack white pre-wound L bobbins (PRWB135), 1 15"x10 yrd Tear-Away stabilizer roll and 1 15x10 yrd Cut-Away stabilzier roll.
For Use With: PR-600, PR-600II, PR-620, Entrepreneur™ PR-650 – New!
Perfect for your at-home embroidery business. This kit contains: 2 12-pack organ needles, 1 adhesive spray, 6 king size spools, 1000 design pack from Dakota, 1 lint brush, 2 blue caps, 1 pen oiler, 1 20-pack white pre-wound L bobbins (PRWB135), 1 15"x10 yrd Tear-Away stabilizer roll and 1 15x10 yrd Cut-Away stabilizer r
This kit contains: 2 12-pack organ needles, 1 adhesive spray, 6 king size spools, 1000 design pack from Dakota, 1 lint brush, 2 blue caps, 1 pen oiler, 1 20-pack white pre-wound L bobbins (PRWB135), 1 15"x10 yrd Tear-Away stabilizer roll and 1 15x10 yrd Cut-Away stabilzier roll.
For Use With: PR-600, PR-600II, PR-620, Entrepreneur™ PR-650 – New!
Non-US Warranty: 30 days parts and labor.
Specifications
This Brother PRSK2 PR600/PR1000 Series Starter Kit is perfect for your at home embroidery business. Containing ten different items, the Brother PRSK2 PR600/PR1000 Series Starter Kit is a great gift for the home embroiderer.This kit contains:
Two twelve pack organ needles
One adhesive spray
Six king size spools
One thousand design pack from Dakota
One lint brush
Two blue caps
One pen oiler
One twenty pack white pre wound L bobbins (PRWB135)
One 15" x 10 yard Tear-Away stabilizer roll
One 15" x 10 yard Cut-Away stabilizer roll
For Use With:
PR-600
PR600C
PR-600II
PR-620
Entrepreneur PR-650, PR650E
Entrepreneur Pro PR-1000, PR1000E
Brother PRSRHK1 4” 5” 6” Round Frame Hoop Set for Persona PRS100, Babylock Alliance BNAL Embroidery Machines
 63966: Brother PRSRHK1 4” 5” 6” Round Frame Hoop Set for Persona PRS100, BNAL |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Round Frame Set
- Includes one 4”, 5” and 6” frame. Perfect for stitching designs that require more stability.
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRSTH200 8x8" Tubular Hoop Frame, Persona PRS100, Babylock Alliance BNAL Embroidery Machines
 64051: Brother PRSTH200 8x8" Tubular Hoop Frame, Persona PRS100, BL Alliance |
Our Price: $169.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
This hoop frame allows you to easily add embroidery to small items such as jeans and pants pockets. This frame is included with the PRS100, and also available for separate purchase.
For Use With: PRS100
Brother PR Hoop Compatibility Chart(.PDF)
For Use With: PRS100
Brother PR Hoop Compatibility Chart(.PDF)
Non-US Warranty: 30 days parts and labor.
Brother PRWT1 Wide Extension Table Top 30x15" Included with PR10, Optional for PR600 PR620 PR650 PR655 PR670 PR680 +Babylock Multi Needle Machines*
 |
Our Price: $699.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Fits Brother and Babylock 6 and 10 needle embroidery machine models.
To support flat hoops with heavier fabrics. Easy to snap and lock in place. Durable surface, great for supporting large or heavy items like quilting squares, towels, blankets, jackets and rugs.
Use with the Jumbo Frame to avoid excess hoop and fabric weight on the machine. The Wide Table Top is included with the PR-1000, PR1050X, PR1055X, or Optional with PR-650/655E, PR675E, .
For Use With: PR-600, PR-600C, PR-600II, PR-620, PR600IIUPG, Entrepreneur™ PR-650, PR655E, PR655C Entrepreneur® Pro PR-1000, PR1000E, Babylock BNT ENT
To support flat hoops with heavier fabrics. Easy to snap and lock in place. Durable surface, great for supporting large or heavy items like quilting squares, towels, blankets, jackets and rugs.
Use with the Jumbo Frame to avoid excess hoop and fabric weight on the machine. The Wide Table Top is included with the PR-1000, PR1050X, PR1055X, or Optional with PR-650/655E, PR675E, .
For Use With: PR-600, PR-600C, PR-600II, PR-620, PR600IIUPG, Entrepreneur™ PR-650, PR655E, PR655C Entrepreneur® Pro PR-1000, PR1000E, Babylock BNT ENT
Non-US Warranty: 30 days parts and labor.
Specifications
Installation Manual for Brother PR Extension Table SetUser's Guide for Optional accessories: Table Set Installation Manual
Brother SAVUPGBNDL2 BUNDLE: V Series UPG2(+183 Stitches, Presser foot raises after trimming, lowers when sewing)+SAMFFC Multi Function Foot Controller
 84508: Brother SAVUPGBNDL2 BUNDLE: V Series UPG2 with SAMFFC Multi Function Foot Controller |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Included with Dream Machine XV8550D, Simply replace the single-pedal, single-function foot controller included with your machine with this multi-function controller, and program the foot controller functions through the LCD display on your machine. The small pedal can be set to control one function, and the larger pedal can be set to control two functions.
Premium Pack II Activation Update:
Premium Pack II Upgrades for XV and V series products will start shipping in September 2017!
The website to activate these exciting new upgrades will be available starting September 12th.
Be sure to share this important information with customers. This will ensure they know when the upgrade can be activated so your customers can begin enjoying the new features it provides.
The V-Series Software Upgrade Premium Pack II is the latest upgrade for your V-Series machines. Now with added designs, presser foot and multi-function foot controller capabilities, you have more options and designs for your projects. Plus, the Software Upgrade Premium Pack II is easy to install – with an internet connection, simply use the activation code.
Features:
• Upgraded presser foot functionality now allows the presser foot to lift automatically after trimming
• Use your multi-function foot controller to raise and lower your presser foot
• Option to turn off the settings on the multi-function foot controller gives you more control how you use your MFFC
• Additional 183 utility decorative stitches for more customization of your projects
For use with: Innov-ís VM6200D, Innov-ís VM5100, Innov-ís VQ3000, Innov-ís VQ2400
Premium Pack II Activation Update:
Premium Pack II Upgrades for XV and V series products will start shipping in September 2017!
The website to activate these exciting new upgrades will be available starting September 12th.
Be sure to share this important information with customers. This will ensure they know when the upgrade can be activated so your customers can begin enjoying the new features it provides.
The V-Series Software Upgrade Premium Pack II is the latest upgrade for your V-Series machines. Now with added designs, presser foot and multi-function foot controller capabilities, you have more options and designs for your projects. Plus, the Software Upgrade Premium Pack II is easy to install – with an internet connection, simply use the activation code.
Features:
• Upgraded presser foot functionality now allows the presser foot to lift automatically after trimming
• Use your multi-function foot controller to raise and lower your presser foot
• Option to turn off the settings on the multi-function foot controller gives you more control how you use your MFFC
• Additional 183 utility decorative stitches for more customization of your projects
For use with: Innov-ís VM6200D, Innov-ís VM5100, Innov-ís VQ3000, Innov-ís VQ2400
Non-US Warranty: 30 days parts and labor.
Specifications
[BrotherSupportSewing] Video instructions for "Assembling the multi-function foot controller".The V-Series Software Upgrade Premium Pack II is the latest upgrade for your V-Series machines. Now with added designs, presser foot and multi-function foot controller capabilities, you have more options and designs for your projects. Plus, the Software Upgrade Premium Pack II is easy to install – with an internet connection, simply use the activation code.
Features:
- Upgraded presser foot functionality now allows the presser foot to lift automatically after trimming
- Use your multi-function foot controller to raise and lower your presser foot
- Option to turn off the settings on the multi-function foot controller gives you more control how you use your MFFC
- Additional 183 utility decorative stitches for more customization of your projects
- For use with: Innov-ís VM6200D, Innov-ís VM5100, Innov-ís VQ3000, Innov-ís VQ2400
Brother Scan N Cut CASCP1 3.9 inch Wide Scraper Tool to Remove Material Cutouts from your Cutting Mat or apply cut designs to smooth surfaces
 84502: Brother ScanNCut CASCP1 3.9" Scraper Tool to Remove Cutouts from Cutting Mat |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
- Remove cut outs from your mat quickly & easily, without damaging your mat
- Sharp edge can go under even the thinnest material (ex. Print paper, vellum paper) and scrape it off
- Slightly curved edge help applying the material smoothly
- It can be held comfortably because of its rounded shape
- The divots in the center gives it a natural grip | It can be hung up with the hook hole
Non-US Warranty: 30 days parts and labor.
Brother XC5740151 Black Cap for PR Auto Needle Threader Silver Arm to keep thread from catching on Multi Needle PR1000s PR600s Babylocks
 90192: Brother #XC5740051 Black Cap for Auto Needle Threader Arm, Was XC5740151 Grey |
Our Price: $4.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
CAP, BROTHER #XC5740051 DETAILS
Guaranteed to fit Babylock Sewing Machine Models:
BMP6, BMP8, BMP9, BND9, BNT10, EMP6
Guaranteed to fit Brother Sewing Machine Models:
PR1000, PR600, PR600II, PR600C, PR620, PR650, PR650C.
Eliminated on later models PR670, PR1050, PR1050X
Alternate Part Numbers: XC5740151
Guaranteed to fit Babylock Sewing Machine Models:
BMP6, BMP8, BMP9, BND9, BNT10, EMP6
Guaranteed to fit Brother Sewing Machine Models:
PR1000, PR600, PR600II, PR600C, PR620, PR650, PR650C.
Eliminated on later models PR670, PR1050, PR1050X
Alternate Part Numbers: XC5740151
Non-US Warranty: 30 days parts and labor.
Brother XC6499151 Black Plastic Needle Plate Cover Spacer Insert for Cap Hat/Cylinder Hoop on PRS100 PR1X PR6 PR10 Babylock MultiNeedle Emb Machines
 85515: Brother XC6499151 Needle Plate Cover Insert for PRS1 PR6 PR10, Babylock Cap Equip |
Our Price: $4.99 Prices are subject to change, and only current prices will be honored. Availability: ON BACKORDER Condition: New In Box |
Features
Use this small plate on your needle plate when you are using the cap attachment. It provides a convex surface to help support the curved underside of your cap so the fabric will not ride up and down on the needle causing skipped stitches. .
Compatible with all Babylock Multi Needle Embroidery Machine Models:
BMP6 & EMP6.
Compatible with Brother Embroidery Machine Models:
PR-600, PR-620, PR-650, PR655, PR670
Alternate Part Numbers: XC6499051, XC6499151
Compatible with all Babylock Multi Needle Embroidery Machine Models:
BMP6 & EMP6.
Compatible with Brother Embroidery Machine Models:
PR-600, PR-620, PR-650, PR655, PR670
Alternate Part Numbers: XC6499051, XC6499151
Non-US Warranty: 30 days parts and labor.
Specifications
The Brother Needle Plate Cover is for use when you are using the cap frame and attachment. The Brother Needle Plate Cover is used on all Brother PRS100, PR600, PR600II, PR620, PR650, PR655, PR670, PR1000, PR1050X. This Brother PR Needle Plate Cover is an original Brother part.Guaranteed to fit Babylock Embroidery Machine Models:
BMP6, BMP8, BMP9, BMV10 Valiant, BNAL Alliance, BND9, BND9-2, BNT10, BNT10L, EMP6
Guaranteed to fit Brother Embroidery Machine Models:
PR1000, PR1000E, PR600, PR600II, PR600C, PR600IIC, PR620, PR620C, PR650, PR650E, PR655, PR670
Brother XC7206001 Genuine Orignal Metal Bobbin Case PRS100 PR600 PR620 PR650 PR655 PR670 PR680 PR1000 PR1050 PR1055 Babylock 1-10 Needle Emb Machines
 31677: Brother XC7206001 Genuine Orignal Metal Bobbin Case PRS100 PR600 PR620 PR650 PR655 PR670 PR680 PR1000 PR1050 PR1055 Babylocks |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
ETA within 30 days! Get Your Tension Right The First Time!. Add Towa Griswold BTG1 TM1, Metal Bobbin Case Thread Tension Gauge, 0-400 Grams of Pull, for Standard L Size Rotary, Sewing Embroidery Quilting Machines
Replacement bobbin case for all Brother PR series multi-needle embroidery machines and comparable Babylock machines. There is no backlash spring or pigtail thread guide on this bobbin case
Compatible with Babylock Embroidery Machine Models:
BMP6, BMP8, BMP9, BNT10 & EMP6. ENT 10, BNT 10,
Compatible with Brother Embroidery Machine Models:
PR-600, PR-600II, PR-600IIC, PR-620 and PR620C, PR650, PR650E, PR655E, PR1000, PR1000E
Replacement bobbin case for all Brother PR series multi-needle embroidery machines and comparable Babylock machines. There is no backlash spring or pigtail thread guide on this bobbin case
Compatible with Babylock Embroidery Machine Models:
BMP6, BMP8, BMP9, BNT10 & EMP6. ENT 10, BNT 10,
Compatible with Brother Embroidery Machine Models:
PR-600, PR-600II, PR-600IIC, PR-620 and PR620C, PR650, PR650E, PR655E, PR1000, PR1000E
Non-US Warranty: 30 days parts and labor.
Specifications
BOBBIN CASE, BROTHER #XC7206001 DETAILSGuaranteed to fit Babylock Embroidery Machine Models:
BMP6, BMP8, BMP9, BMV10 Valiant, BNAL Alliance, BND9, BND9-2, BNT10, BNT10L, EMP6
Guaranteed to fit Brother Embroidery Machine Models:
PR1000, PR1000E, PR600, PR600II, PR600C, PR600IIC, PR620, PR620C, PR650, PR650C, PR650E
compatible for:Brother: PR-600, PR-600C, PR-600II, PR-600IIC
PR-620, PR-620C
PR-650, PR-650C, PR-650E, ENTREPRENEUR
PR-1000, PR-1000E, ENTREPRENEUR PRO
XL702, XL703, XL2005, XL4001, XL5001
Brother XD0637051 XD0637052 Hoop Holder Tubular Round Hoop Arm Supply Assembly For PR600 PR620 PR650 PR655 PR670 PR680D Babylock
 24838: Brother XD0637052 Hoop Holder Tubular Round Arm Supply Assembly |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
ETA within 30 days, TUBULAR ROUND ARM SUPPLY ASSEMBLY
Non-US Warranty: 30 days parts and labor.
Specifications
Tubular Round Arm Supply Assembly, Brother #XD0637051 DetailsGuaranteed to fit Babylock Sewing Machine Models:
BMP6, BMP8, BMP9, BND9
Guaranteed to fit Brother sewing machine models:
PR600, PR600II, PR600C, PR620, PR650, PR650C
Alternate Part Numbers: XD0637052
Brother XE7376001 TUBULAR ROUND Hoop Holder ARM B SUPPLY ASSY for PR1000E PR1000 PR1050 PR1055 Babylock
|
Our Price: $79.99 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
Brother XE7376001 TUBULAR ROUND ARMB SUPPLY ASSY PR1000E
Non-US Warranty: 30 days parts and labor.
Brother XF6607001 Cap Driver Wide Only Supply Assy for PRPCF1 or Hoop Tech Gen2 on PR1000 PR1000 PR1050 PR1055 or Babylock Enterprise Valient 10Needle
 86849: Brother PRCF1-XF6607001 Cap Driver Wide Only for PRPCF1 on PR1000 PR1050X |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
On Order! Cap Driver Assembly for Brother PR1000 and PR1050X. Works with the following cap frame: Brother PRPCFH4: Brother PRPCF1 Cap Equipment, Cap Frame Brother PRPCFH4
No tools or instructions come with just the Brother cap driver part #XF6607001 below*,
only with the purchase of complete Brother 3pc cap equipment PRCF3, PRCF5 or .PRPCF1.
This is what parts may be needed to search for online and and order online by part number, if you need to make any adjustments in the driver on your machine. .
3mm T wrench: XC7148051 x 1
2.5mm T Wrench: XC7149051x 1
Rubber Pad: XC7150051
No tools or instructions come with just the Brother cap driver part #XF6607001 below*,
only with the purchase of complete Brother 3pc cap equipment PRCF3, PRCF5 or .PRPCF1.
This is what parts may be needed to search for online and and order online by part number, if you need to make any adjustments in the driver on your machine. .
3mm T wrench: XC7148051 x 1
2.5mm T Wrench: XC7149051x 1
Rubber Pad: XC7150051
Non-US Warranty: 30 days parts and labor.
Specifications
How to install the cap frame driverGoogle Search on Brother PR10 cap driver installation
DIME Designs in Machine Embroidery HPMAT2 Hi-Definition PINK Hoop Mat Hooping Mat 25.75 x 17.75, Silicone Grid 24 x 17
 DIME Designs in Machine Embroidery HPMAT2 Hi-Definition Hoop Mat Hooping Mat 25.75 x 17.75 Silicone Grid 24 x 17 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Silicone mat with printed 1/2 inch grid provides a non-skid hooping surface. Easily find the centerpoint of any size or brand of hoop. The printed grid allows you to instantly measure by simply placing the hoop down on the mat.
The pink color allows PAL3 to really shine in hi-definition on the mat making centering even easier!
How to use:
The pink color allows PAL3 to really shine in hi-definition on the mat making centering even easier!
How to use:
- Place the Hoop Mat on a flat work surface
- Center the outer ring (standard hoop) or bottom metal frame (Snap Hoop Monster®) on the mat's grid
- Place stabilizer/fabric over the hoop
- Insert inner ring (standard hoop) or place magnetic top frame (Snap Hoop Monster®) on the fabric/stabilizer
Non-US Warranty: 30 days parts and labor.
Specifications
- 100% silicone
- 24" x 17" printed grid
- Hoop Mat measures 25.75" x 17.75" overall
*The Hoop Mat is not a pressing or cutting surface
Designs in Machine Embroidery STP0112 Stipple Fabulous Flowers & Medallions CD, Learn to Stich in 3D Appliqué & Machine Embroidery in 1 Stipple! step
 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Learn to stich in 3D with appliqué & machine embroidery in one Stipple! step
The sky is the limit with what you can create with this collection
Whether you’re a novice or a seasoned embroiderer, you’ll enjoy creating with Stipple Fab Flowers & Medallions.
The collection includes three-dimensional applique flowers, six cheerful square blocks and two adaptable half-blocks.
This fun and versatile Stipple design set will be your new go-to collection for creating quick and easy projects – from impressive quilts and wall-hangings to unique totes and t-shirts.
Learn from the best and open yourself up to an entirely new world of possibilities!
Stipple! Fabulous Flowers & Medallions Includes:
6 square blocks, 2 half-blocks, 1 dimensional flower and 2 full-stipple border designs for the 200mm x 200mm (8" x 8") hoop, the 180mm x 300mm (7" x 12") hoop and the 130mm x 180mm (5" x 7") hoop
Printable step-by-step instructions to make the Fab Flowers & Medallions quilt (Finished size: 45" x 36 1/2")
Printable instructions for Eileen's Reversible Piecing Technique.
The sky is the limit with what you can create with this collection
Whether you’re a novice or a seasoned embroiderer, you’ll enjoy creating with Stipple Fab Flowers & Medallions.
The collection includes three-dimensional applique flowers, six cheerful square blocks and two adaptable half-blocks.
This fun and versatile Stipple design set will be your new go-to collection for creating quick and easy projects – from impressive quilts and wall-hangings to unique totes and t-shirts.
Learn from the best and open yourself up to an entirely new world of possibilities!
Stipple! Fabulous Flowers & Medallions Includes:
6 square blocks, 2 half-blocks, 1 dimensional flower and 2 full-stipple border designs for the 200mm x 200mm (8" x 8") hoop, the 180mm x 300mm (7" x 12") hoop and the 130mm x 180mm (5" x 7") hoop
Printable step-by-step instructions to make the Fab Flowers & Medallions quilt (Finished size: 45" x 36 1/2")
Printable instructions for Eileen's Reversible Piecing Technique.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
EMBROIDERY FORMATS: ART, C2S, DST, EXP, HUS, JEF, PES, VIP, XXXREQUIREMENTS: EMBROIDERY SOFTWARE, 5" X 7", 7" X 12" AND 8" X 8" EMBROIDERY FIELDS
DESIGN SIZES: 200MM X 200MM, 170MM X 170MM, 130MM X 130MM
STIPPLE! IS A PATENTED PROCESS: PATENT NUMBER 8,171,867
Embroidery Design Formats: ART, C2S, DST, EXP, HUS, JEF, PES, VIP, XXX
Designs sizes: 200mm x 200mm, 170mm x 170mm, 130mm x 130mm
Requirements: Embroidery software, 5" x 7", 7" x 12" or 8" x 8" hoop
Adobe Acrobat Reader software required to open PDF files.
Stipple! is a patented process: Patent Number 8,171,867
Durkee 7-7/8" x 11 3/4" Sturdi Frame for A Arms on Brother and Babylock 6 & 10 Needle Machine, Add Adhesive Stabilizers
 85246: Durkee 7 7/8" x 11 3/4" SturdiFrame for Brother and Babylock 6 & 10 Needle Machine |
Our Price: $139.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
We are proud to announce the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7 7/8" x 11 3/4" (sewing field) and is to be attached to the “A” arms of a 10 needle machine.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7 7/8" x 11 3/4" (sewing field) and is to be attached to the “A” arms of a 10 needle machine.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Sturdiframe
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 1.5"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR3010 30x10cm (11 7/8 x 4) Rectangle Embroidery Frame Single Hoop with Brackets for Brother PR6-10 Needle, Babylocks
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke. Single hoop design for adhesive stabilizers on bottom of hoop to hold project to top of hoop.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, Pr655, PR670E and the Baby Lock EMP6, BMP8, and BMP9 6 needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, Pr655, PR670E and the Baby Lock EMP6, BMP8, and BMP9 6 needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 12.5CM x 24CM (5"x9" I.D.) Rectangular Hoop - for Brother PRS 100 Persona and Babylock Alliance BNAL
 |
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Durkee 5 x 9 Hoop Frame Baby Onesie Tutorial by Mike Johns
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Durkee 5 x 9 Hoop Frame Baby Onesie Tutorial by Mike Johns
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee 12x4" Optional Hoop for use with 7in1 Tubular EZ Frames, Heavy Duty 3/16" Aluminum for Brother Babyloci PR6 to PR10 Needle Embroidery Machines*
 Durkee 12x4" Hoop for 7in1 Tubular EZ Frames Set on Brother PR6-PR1000 |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Made of Heavy Duty Aluminum. Connects to the Durkee EZ Frame set, not a stand alone product.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee 15cmx15cm (6"x6" I.D.) Square Hoop-for Brother PRS100 Persona and BL Alliance
 |
Our Price: $42.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 15cm x 15cm square frame. Fits Brother Persona, and Babylock Alliance Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee 2"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 2.5"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 24x24cm 9x9" Square Hoop for Brother PRS100 Persona and Babylock Alliance BNAL
 |
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee PR2424 Most Popular 9x9" Hoop. Also works for 5x7" Designs* With Side Brackets Included for Brother Persona Embroidery Machines using your Arm A, not Arm B. *
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to the size of your machine's embroidery area, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother Persona and Babylock Alliance Single Needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to the size of your machine's embroidery area, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother Persona and Babylock Alliance Single Needle embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is great for embroidering children’s clothing and larger square designs that round hoops cannot accommodate.This Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is constructed of high impact plastic making it virtually indestructible. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square has brass inserts for all screws, light texture on the hooping surface, directional guides, and extra height, which aids in holding thicker, harder to hold garments. The adjusting rings' thumb screws on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are large and long to provide more torque and have a wider space for adjustments. The metal clips on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are extra long, aiding in vibration reduction. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square metal clips are zinc plated to provide reduced wear, and they come complete with plastic screws and lock washers.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square Advantages:
Directional guides.
Thumb screw is larger and longer than our competitors'.
Wide space thumb screw adjusting.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee 3"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 3"x8"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $59.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 360NS 5.5x6 Inch Flat Hat Hoop Front Cap Frame Back, Insert for Happy Embroidery Machines
 64083: Durkee 360NS 5.5x6" Hat Hoop Front Cap Frame Back for Happy Embroidery Machines |
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
This Durkee Cap Frame is available for the same price with free shipping for other multi needle machines: Tajima/Toyota, Happy, Melco/Bernina, SWF. Please call 800-739-7374 or 225-923-1285 to order for brands and models other than what is on this page. Thanks.Durkee 4"x12" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 4"x4" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x4" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x4" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 5"x4"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $49.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 5"x5" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 66707: Durkee 5"x5" EZ Tubular Hoop 3/16" Aluminum Frame for Existing Multi-Needle EZ Frames |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x5" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x5" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 5"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x8" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 5"x8" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 5.5x6" Flat Cap Frame Front, Hat Back Embroidery Hoop, Insert for Janome MB-4, MB-7, MB4S, Melco EP4
82415: Durkee 5.5x6" Cap Frame Front, Hat Back Hoop for Janome MB4 MB7 |
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
- Easy to use - attaches to your machine like a normal hoop
- Extra-large sewing field - much larger than many cap just like any other hoop embroidery systems and at a fraction of the price
- Durable but lightweight - all metal construction
- Can hoop the back of a cap, as well as, the front with anodized aluminum plate and stainless steel arms
- Vertical slots in the front and back of the frame
- Comes with Durkee’s lifetime replacement warranty plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee 6"x6" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 6"x6" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 6"x6" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee Sturdi Frames 7-7/8" x 14" 560mm for A Arms on Brother PR1000, PR1050X and Babylock 10 Needle Embroidery Machines, Add Adhesive Stabilizers
 85244: Durkee 7 7/8" x 14" 560mm Sturdi Frame Complete Unit For "A" Arms on Brother and Babylock 10 Needle |
Our Price: $149.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
We are proud to announce the Durkee SturdiFrames for Brother and Baby Lock Ten (10) needle machines!!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
7 7/8" x 14" (sewing field) and is to be attached to the “A” arms of a 10 needle machine. The frame will be recognized by the machine as the “Extra Large” hoop.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
7 7/8" x 14" (sewing field) and is to be attached to the “A” arms of a 10 needle machine. The frame will be recognized by the machine as the “Extra Large” hoop.
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Sturdiframe
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 7"x5"" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
|
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 7"x7" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multineedle EZ Frames
 |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 7"x7" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 7"x7" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 7-7/8" x 8" Sturdi Frame for A Arms only -Gold Series on Brother and Babylock 6 & 10 Needle Embroidery Machines, Add Adhesive Stabilizers
 85247: Durkee 7 7/8" x 8" SturdiFrame for Brother and Babylock 6 & 10 Needle Machine |
Our Price: $119.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
We are proud to announce the SturdiFrame for Brother and Baby Lock Ten (10) needle machines!!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7-7/8" x 8" (sewing field) and is to be attached to the “A” arms
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
These frames are constructed of 3/16" anodized aluminum with stainless steel brackets to attach the frames to the machine arms.
The Size is 7-7/8" x 8" (sewing field) and is to be attached to the “A” arms
Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the
appropriate arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the
frame, press down to adhere the fabric to the backing and stitch!
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Durkee In-The-Hoop Pot Holder on Baby Lock Multi-Needle
Sturdiframe
Durkee In-The-Hoop Pot Holder on Baby Lock Multi-Needle
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 8" x 12" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines
 Durkee 8" x 12" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines |
Our Price: $245.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Sometimes called a "Rail & Clamp" system, sash frames have been (and continue to be) one of the most frequently used methods of hooping/framing in the commercial embroidery industry. Why? When registration is critical and the fabric must be held tight, many would argue there is no better system. Projects such as quilting, patches & badges, free standing lace, photo stitch, end-to-end quilting and towels (just to name a few) have a perfect partner with Durkee Sash Frames.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame. If your Brother or Baby Lock machine has a Maximum Sewing Field of 9 1/2" x 14" select the 8" x 12" Sash Frames.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame. If your Brother or Baby Lock machine has a Maximum Sewing Field of 9 1/2" x 14" select the 8" x 12" Sash Frames.
Non-US Warranty: 30 days parts and labor.
Specifications
Current Brother & Baby Lock models with a Maximum Sewing Field of 9 1/2" x 14Brother
XV8500D Dream Machine
XV8550D Dream Machine
Stellaire Innov-is XJ1
Stellaire Innov-is XE1
Baby Lock
Destiny BLDY
Destiny 2 BLDY2
Altair BLTA
Meridian BLMA
Durkee 9.5" x 14" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines
 Durkee 9.5" x 14" Sewing Field Sash Frame for Brother & Baby Lock Single Needle Flat Bed Machines |
Our Price: $265.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Sometimes called a "Rail & Clamp" system, sash frames have been (and continue to be) one of the most frequently used methods of hooping/framing in the commercial embroidery industry. Why? When registration is critical and the fabric must be held tight, many would argue there is no better system. Projects such as quilting, patches & badges, free standing lace, photo stitch, end-to-end quilting and towels (just to name a few) have a perfect partner with Durkee Sash Frames.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame.
Due to physical space limitations with flat bed machines combined with the necessary size and placement of the rails and clamps, the available "SEWING FIELD" will be slightly less than your machines capability. Specifically, if your Brother or Baby Lock machine has a Maximum Sewing Field of 10 5/8" x 16" you may select either the 9 1/2" x 14" Sash Frame or the 8" x 12" Sash Frame.
Non-US Warranty: 30 days parts and labor.
Specifications
Current Brother & Baby Lock models w/ a Maximum Sewing Field of 10 5/8" x 16Brother
Luminaire1 Innov-is XP1
Luminaire2 Innov-is XP2
Luminaire3 Innov-is XP3
Baby Lock
Solaris BL
Solaris 2 B
Solaris Vision BLSA
Durkee 7in1 EZ Frames Melco Bravo Bernina E16, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back/Radius (like Fast Frames)*
 |
Our Price: $399.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee 8"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multi needle EZ Frames
 85237: Durkee 8"x8" EZ Tubular Hoop 3/16" Aluminum Frame - For use with existing Multi needle EZ Frames |
Our Price: $54.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
This video show cases all 7 hoops in the combo available here. This product is the 4"x12" frame only.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 8x12in x 3/16in Thick Aluminum Hoop Frame one of many Tubular EZ Flat Frames for Brother and Babylock PR6 to PR10 Needle Embroidery Machines
 65751: Durkee 8x12in x 3/16in Thick Aluminum Screw On Hoop to go along with other Durkee Tubular EZ Flat Frames for Brother PR600 to PR10 Embroidery Machines |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 9 Hoops Round: 3.5, 4.5, 5.5, 7, Squares: 6x6, 5x9, 9x9, Large: 12x4, 12x6" for Brother PR6-1000 and Babylock
 |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Includes the following 9 Durkee Embroidery Hoops:
PR09 9cm, 3.5" (3 3/16"Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR12 12cm 4.5" (4 3/8"Diameter) Round Frame Hoop & Brackets
Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR15 15cm or 5.5" (5 5/8" Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR1515,15x15cm (6x6") Square Embroidery Frame Hoop & Brackets
Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR18 18cm, 7" (6 3/4" Diameter) Round Embroidery Frame Hoop & Bracket
Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR2424 24cm x 24cm (9"x9") Square Embroidery Frame Hoop & Brackets
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3010 30x10cm (11 7/8" x 4") Rectangle Emb Frame Hoop & Brackets
30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3015 30x15cm (12x 6") Rectangle Embroidery Frame Hoop & Bracket
30cm x 15cm (12″×6″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
12.5x24cm-500 5x9" Rectangle Embroidery Frame Hoop & Brackets
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
PR09 9cm, 3.5" (3 3/16"Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR12 12cm 4.5" (4 3/8"Diameter) Round Frame Hoop & Brackets
Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR15 15cm or 5.5" (5 5/8" Diameter) Round Embroidery Frame Hoop & Brackets
Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR1515,15x15cm (6x6") Square Embroidery Frame Hoop & Brackets
Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR18 18cm, 7" (6 3/4" Diameter) Round Embroidery Frame Hoop & Bracket
Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached.
PR2424 24cm x 24cm (9"x9") Square Embroidery Frame Hoop & Brackets
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3010 30x10cm (11 7/8" x 4") Rectangle Emb Frame Hoop & Brackets
30cm x 10cm (12″×4″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached.
PR3015 30x15cm (12x 6") Rectangle Embroidery Frame Hoop & Bracket
30cm x 15cm (12″×6″) rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
12.5x24cm-500 5x9" Rectangle Embroidery Frame Hoop & Brackets
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee Embroidery - Hooping Tips from Brent Taylor on Vimeo.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee A.S.K. Embroidery Hoop Starter Kit, 11in1 Tubular Frames for Brother Persona PRS100, Babylock Alliance BNAL
 |
Our Price: $664.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” A.S.K for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee’s Starter Kits feature Durkee Hoops & Frames M.S.K. for Brother and Baby Lock 6 & 10 needle machines AND their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Durkee’s Starter Kits feature Durkee Hoops & Frames M.S.K. for Brother and Baby Lock 6 & 10 needle machines AND their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
The Kit contains:One (1) - 24cm x 24cm (9" x 9")
One (1) - 12.5cm x 24cm (5" x 9")
One (1) - 15cm x 15cm (6" x 6")
Seven (7) piece combo pack also includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee CF-PR-MN 5.5x6 Flat Cap Frame Front, Hat Back Hoop, Insert for Brother SACFPRS for Persona PRS100, Babylock Alliance BNAL Embroidery Machines
|
Our Price: $195.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
Durkee’s cap frame attaches to your machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
- Easy to use - attaches to your machine like a normal hoop
- Extra-large sewing field - much larger than many cap just like any other hoop embroidery systems and at a fraction of the price
- Durable but lightweight - all metal construction
- Can hoop the back of a cap, as well as, the front with anodized aluminum plate and stainless steel arms
- Vertical slots in the front and back of the frame
- Comes with Durkee’s lifetime replacement warranty plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
This Durkee Cap Frame is available for the same price with free shipping for other multi needle machines: Janome MB4, Tajima/Toyota, Happy, Melco/Bernina, SWF. Please call 800-739-7374 or 225-923-1285 to order for brands and models other than Brother PR and Babylock on this page. Thanks.Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee CF-PR-MN 5.5x6" Hat Front, Cap Back Frame Brother SACFPRMN & Babylock 6-10 Needle Machines: PR600, PR620, PR650, PR655, PR655X, PR1000, PR1050X
|
Our Price: $195.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This Durkee Cap Frame is available for the same price with free shipping in USA 48 states for other multi needle machines: Janome MB4, Tajima/Toyota, Happy, Melco/Bernina, and SWFJust Specify Your Brand, Model Number and Name in our Drop Down Menu above. Example: Brother PR1000 Entrepreneur. Thanks. John
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Durkee Cap Frame
posted by Rosemary Gulledge Blog on december 7, 2015
Durkee Innovation in Embroidery Technology, Introducing Durkee Cap Frames - all metal frames allowing embroiderers to embellish caps with logos and designs more than Brother 2 1/2" tall.
Durkee’s cap frame attaches to a multi-needle machine just like a normal hoop. The bill of the cap is clamped securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer.
This is a fantastic frame for cap embroidery without the need to change over to a cap driver. The Durkee cap frame fits into your standard arms just like a normal frame. It is so easy to use. Now everyone can do cap embroidery in house.
*Easy to use - attaches to multi-needle machine * Extra-large sewing field - much larger than many cap
just like any other hoop embroidery systems and at a fraction of the price
* Durable but lightweight - all metal construction * Can hoop the back of a cap, as well as, the front.
with anodized aluminum plate and stainless steel arms
* Vertical slots in the front and back of the frame * Comes with Durkee’s lifetime replacement warranty
plus, alignment guides to aid in achieving consistent hooping results.
Our cap frame allows the embroiderer to sew a design or logo approximately 5" wide and 4 1/2" tall. After completing the front of the cap, the embroiderer can turn the cap around and clamp the back tabs of the cap in place to embroider the back of the cap as well.
Durkee Cap Frame
posted by Rosemary Gulledge Blog on december 7, 2015
Extended US Warranty: Lifetime warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee EZ Frame 19 5/8" Wide Hoop Holding Arms Only for Brother and Baby Lock 6 & 10 Needle Machines PR655, PR1000, PR1050
 79904: Durkee EZ Frame 19 5/8" Wide Arms Only for Brother/Baby Lock 6 & 10 Needle Machines |
Our Price: $119.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Durkee EZ Frame 19 5/8" Wide Arm Only for Brother/Baby Lock 6 & 10 Needle Machines.
The Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is the adaptor arm needed to use the Durkee EZ Frames with your machine. Simple and effective system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project tot he underside of the frame. Durkee EZ Frames for Multi Needle Commercial Embroidery Machines have a lifetime replacement warranty against manufacturers defects. This Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is what you need to purchase if you are not wanting the complete EZ Frame System. You can then simply add the individual frame you desire.
The Durkee EZ Frame Wide Arms 19 5/8" for Brother/Baby Lock 6 & 10 Needle Machines is compatible with:
Brother PR600
Brother PR600II
Brother PR620
Brother PR650
Baby Lock EMP6
Baby Lock BMP8
Brother PR1000
Baby Lock 10 Needle
The Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is the adaptor arm needed to use the Durkee EZ Frames with your machine. Simple and effective system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project tot he underside of the frame. Durkee EZ Frames for Multi Needle Commercial Embroidery Machines have a lifetime replacement warranty against manufacturers defects. This Durkee EZ Frame Wide Arms 19 5/8" for Brother Baby Lock 6 and 10 Needle Machines is what you need to purchase if you are not wanting the complete EZ Frame System. You can then simply add the individual frame you desire.
The Durkee EZ Frame Wide Arms 19 5/8" for Brother/Baby Lock 6 & 10 Needle Machines is compatible with:
Brother PR600
Brother PR600II
Brother PR620
Brother PR650
Baby Lock EMP6
Baby Lock BMP8
Brother PR1000
Baby Lock 10 Needle
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee Magnetic EZ Frame Arm Unit Magnetic 4x4 EZ Frame for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame Arm Unit Magnetic 4x4 EZ Frame |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroiderer. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee Magnetic EZ Frame Arm Unit Magnetic 7x5 EZ Frame for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame Arm Unit Magnetic 7x5 EZ Frame for Home and Commercial Embroidery |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroiderer. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 EZ Frames for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 EZ Frames for Home and Commercial Embroidery |
Our Price: $519.99 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroiderer. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 with Arm EZ Frames for Home and Commercial Embroidery
 Durkee Magnetic EZ Frame 4pc Set 4x4, 5x8, 7x5, 8x8 with Arm EZ Frames for Home and Commercial Embroidery |
Our Price: $623.00 Prices are subject to change, and only current prices will be honored. Availability: Retail Store Only Condition: New In Box |
Features
We proudly introduce Durkee Magnetic EZ Frames in four (4) sizes for the home and commercial embroider
er. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
er. The frames will work with existing Blue Adaptor Arms. The frames are available individually or in two sets with and without the Blue Adaptor Arm. Review the video introduction here:
Introducing Durkee Magnetic EZ Frames from Brent Taylor on Vimeo.
In addition to your standard embroidery projects, Durkee Magnetic EZ Frames are great for thick towels, blankets, quilt sandwiches, etc. Free standing lace stitches beautifully as the stabilizer is held tight and perfectly flat. They are also great for patches, heavy jackets, slippery fabrics, dense photo stitch designs or difficult materials such as cork, vinyl, etc.
Four (4) powerful magnetic bars for each frame instead of one singular hoop
- Tremendous magnetic holding power
- Centering aids on all four sides
- Embroiderer’s choice of stabilizers
- More control for centering and straightening
- Work with existing Blue Adaptor Arms
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee EZ Frame 4pc Set PLUS 2x4, 5x4, 7x5, 8x8 with Arm EZ Frames and EZ Cap Frame for Home and Commercial Embroidery
 Durkee EZ Frame 4pc Set PLUS 2x4, 5x4, 7x5, 8x8 with Arm EZ Frames and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $399.95 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
No hoop pop off...no hoop burn with EZ Frames. Just apply self-adhesive backing to the underside of the frame and "float" your material on top. Each EZ Frame has alignment guides one ach side for easy centering. Start with the Kick-Start Combo and add additional frames as you need them! Includes 2"x4", 5"x4" ,7"x5", 8"x8" EZ Frames & EZ Cap Frame.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Important Note: The stated sewing field for each individual frame is factual for Commercial embroidery machines capable of stitching 10” or greater from top to bottom (Y axis). Due to the space required for the Blue Adaptor Arm, machines with sewing fields of less than 10” will not be able to stitch the full 8” height. However, width will not be an issue. Thus, Durkee reminds the embroiderer on the label of each frame to, “Always Trace Your Design”Durkee EZ Frame 7pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Embroidery
 Durkee EZ Frame 7pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $519.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Seven (7) piece EZ Frame Combo Package Includes the Following EZ Frames Sizes: 2"x4", 2 1/2"x4", 3"x4", 5"x4", 7"x5", 8"x8", Radius Frame, & EZ Cap Frame.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame 8pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Embroidery
 Durkee EZ Frame 8pc Set PLUS 2x4, 2 1/2x4, 3x4, 5x4, 7x5, 8x8, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $549.00 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Eight (8) piece EZ Frame Combo Package Includes the Following EZ Frame Sizes: 2"x4", 2 1/2"x4", 3"x4", 5"x4", 7"x5", 8"x8", 12"x8",Radius Frame & EZ Cap Frame.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame 12pc Set PLUS 1 1/2x4, 2x4, 2 1/2x4, 3x4, 3x8, 5x4, 5x8, 7x5, 8x8, 12x4, 12x8 with Arm EZ Frames, Radius Frame and EZ C for Embroidery
 Durkee EZ Frame 12pc Set PLUS 1 1/2x4, 2x4, 2 1/2x4, 3x4, 3x8, 5x4, 5x8, 7x5, 8x8, 12x4, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $768.75 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Twelve (12) piece EZ Frame Master Pack Includes the Following EZ Frame Sizes: 1 1/2"x4", 2"x4", 2 1/2"x4", 3"x4", 3"x8", 5"x4", 5"x8", 7"x5", 8"x8", 12"x4", 12"x8", Radius Frame & EZ Cap Frame.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frame 17pc Set Includes 15 Sizes EZ Frame, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery
 Durkee, EZ Frame, 12pc, Set, PLUS, 1 1/2x4, 2x4, 2 1/2x4, 3x4, 3x8, 4x4, 5x4, 5x5, 5x8, 6x6, 7x5, 7x7, 8x8, 9x9, 12x4, 12x8 with Arm EZ Frames, Radius Frame and EZ Cap Frame for Home and Commercial Embroidery |
Our Price: $1,043.50 Prices are subject to change, and only current prices will be honored. Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
The Seventeen (17) piece EZ Frame Ultimate Pack Includes the Following EZ Frame Sizes: 1 1/2"x4", 2"x4", 2 1/2"x4", 3"x4", 3"x8",4" x 4", 5"x4", 5" x 5", 5"x8", 6" x 6", 7"x5", 7" x 7", 8"x8", 9" x 9", 12"x4", 12"x8", Radius Frame, & EZ Cap Frame
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
No hoop pop off... no hoop burn with EZ Frames. Just apply self-adhesive backing to the under side of the frame and “float” your material on top. Each EZ Frame has alignment guides on each side for easy centering.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ Frames 4in1 Single Needle Package 2: 7x12" 6x6" 5x7" 4x4" Hoops for Brother VE2200 VM5100 VM6200D, Quattro, NV5000 NV4750 NV4500, NV4000, BL
 |
Our Price: $295.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 7x12
- 5x7
- 6x6
- 4x4
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
Durkee SAC4PCSNXV EZ Frames 4in1 Single Needle Package #5: 9.5 X 14, 8 X 8, 5 X 7, 4 X 4 Frames
 90943: Durkee EZ Frames 4in1 Single Needle Package #5: 9.5 X 14, 8 X 8, 5 X 7, 4 X 4 Frames |
Our Price: $295.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 9.5x14
- 5x7
- 8x8
- 4x4
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee EZ-4 PC PR 6 & 10 Needle Kickstart 4in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PR6 PR1000 PR1050 PR1055 2x4 5x4 7x5 8x8 for A Arms
 |
Our Price: $249.95 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
No hoop pop-off * No hoop burn * Less stress on fingers and hands * User friendly
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000.. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000.. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee 8in1 EZ Frames +Arm for Brother PR1X-1055X & BL, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8 8x12"+Cap Back/Radius Frame
66290: Durkee 8in1 EZ Frames Tubular Hoops 3/16" Aluminum, Brother PR6's PR1000's |
Our Price: $369.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.
Infant Bodysuit Using Durkee EZ Frames and Multi Needle Embroidery Machine from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
ABOUT THE PRODUCTDurkee‡ frames offer you a simple, yet effective way to hoop your more difficult-to-hoop items. Hold your fabric in place with our adhesive stabilizer and start stitching. This 8-piece set comes with the Main Attachment Arm, (1) 2” x 4”, (1) 2.5” x 4”, (1) 3” x 4”, (1) 5” x 4”, (1) 7” x 5”, and (1) 8” x 8” hoops, and Cap Back/Radius frame. Comes with Durkee’s limited lifetime replacement warranty. Adhesive stabilizer, SA5820 or SA5815 is required. Additional purchase required.
Eight (8) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- 12" x 8"
- Cap Back/Radius Frame
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee HP Hooping Pro Station: Combo Professional Package: Full Station Board, Stabilizing Legs, Junior Station Board, Stabilizing Leg
 Durkee HP Hooping Pro Station: Combo Professional Package: Full Station Board, Stabilizing Legs, Junior Station Board, Stabilizing Leg |
Our Price: $825.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Package Includes: One (1) Hooping Pro Full Station, One (1) Hooping Pro Project Station w/One (1) set of Stabilizing Legs, and One (1) Hooping Pro "junior" Board w/ One (1) Additional Set of Stabilizing Legs
Non-US Warranty: 30 days parts and labor.
Durkee HP1 Hooping Pro Full Station Uses almost any size or style hoop: tubular, magnetic, wooden, single needle...no additional attachments required
 |
Our Price: $595.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Ten Reasons To Own The Durkee Hooping Pro
No Additional Purchases*for Tubular Hoops, Magnetic Hoops, Wooden Hoops, and Single Needle Hoops, No Additional Attachments or Fixtures Required.
Please note the project stations are sold separately.
Use almost any size hoop from any manufacturer including traditional tubular hoops, wooden hoops, or magnetic hoops. There are NO ADDITIONAL purchases to be made for parts, pieces, or fixtures to accommodate different size hoops.
Two Stations
Two Hooping Pro stations available – A “Full Station” for polo shirts, t-shirts, jackets, etc. and an optional narrower “Project Station” for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.
Cross-Hair Laser Light
The “Full Station” comes with a fully adjustable cross-hair laser light with articulating arm to assist in centering and aligning.
Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.
Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.
Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.
Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.
Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.
Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Non-US Warranty: 30 days parts and labor.
Specifications
PLEASE NOTE: THE VIDEO IS FOR EDUCATIONAL PURPOSES. THIS DOES NOT MEAN WHAT YOU SEE IN THE VIDEO IS INCLUDED WITH THE PURCHASE OF THIS ITEM.Click here to watch the Durkee Hooping Pro – Introduction
Durkee Hooping Pro-Left Chest and Jacket Back
Durkee Hooping Pro – Freedom Ring Demo:
Optional Durkee Project Station Demo:
Optional Durkee Project Stations Plus Boards:
Durkee HP2 Hooping Pro Project Station: for Embroidery Design Placement on Sleeves, Legs, Hat Backs, and Bags
 |
Our Price: $229.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Great for smaller, narrower embroidery projects such as shirt sleeves, pant legs,
Two Stations
Two Hooping Pro stations are available – An optional “Full Station” for polo shirts, t-shirts, jackets, etc. and the narrower “Project Station” on this page for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.
Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.
Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.
Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.
Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.
Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.
Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Two Stations
Two Hooping Pro stations are available – An optional “Full Station” for polo shirts, t-shirts, jackets, etc. and the narrower “Project Station” on this page for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.
Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.
Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.
Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.
Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.
Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.
Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.
Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.
Non-US Warranty: 30 days parts and labor.
Specifications
Durkee Project Station Demo:
Durkee Project Stations Plus Boards:
Click here to watch the Optional Durkee Hooping Pro – Introduction
Durkee Optional Hooping Pro-Left Chest and Jacket Back
Optional Durkee Hooping Pro – Freedom Ring Demo:
Durkee EZ Frames 12in1 Master Set 8pc: Adaptor arm + 1-1/2"x 4", 3"x 8", 5"x 8" & 12"x 4" for Brother PR, Babylock 6-10 Needle Machines Only
 94151: Durkee Hoops EZFrames 12in1 Master Set: 12 Most Popular Size EZ Frames PLUS Blue Adaptor Arm EZ for Brother PR/Babylock 6-10 Needle Machines Only |
Our Price: $529.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
The two most frequently heard comments from EZ Frame owner/users are:
“I can’t believe how stable they are” and “I’ll never hoop again!”
There is no substitute for having the frames you need - when you need them! From baby bibs to boots, Onesies® to tote bags, tea towels to bath towels, pockets to purses, table napkins to tennis shoes and more...
The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
“I can’t believe how stable they are” and “I’ll never hoop again!”
There is no substitute for having the frames you need - when you need them! From baby bibs to boots, Onesies® to tote bags, tea towels to bath towels, pockets to purses, table napkins to tennis shoes and more...
The EZ Frames Master Set is ready to go to work on your next embroidery project! This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
- 1 1/2" x 4"
- 2" x 4"
- 2 1/2" x 4"
- 3" x 4"
- 3" x 8"
- 5" x 4"
- 5" x 8"
- 7" x 5"
- 8" x 8"
- 12" x 4"
- 12" x 8"
- Radius Frame
How to use the Durkee easy frames.
Tips for Maximizing Your Sewing Field with EZ Frames from Durkee
Non-US Warranty: 30 days parts and labor.
Specifications
The EZ Frames Master Set is ready to go to work on your next embroidery project!This comprehensive set includes the blue adaptor arm plus 12 of our most popular EZ Frame sizes: (Sewing Fields)
1 1/2" x 4"
2" x 4"
2 1/2" x 4"
3" x 4"
3" x 8"
5" x 4"
5" x 8"
7" x 5"
8" x 8"
12" x 4
12" x 8"
Radius Frame
Durkee Kickstart 4in1 EZ-4 Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock Alliance BNAL
 91740: Durkee Kickstart 4in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock |
Our Price: $249.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
No hoop pop-off * No hoop burn * Less stress on fingers and hands * User friendly
Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000, but applicable to the PRS100 Persona. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee proudly introduces our “Kick-Start Combo” Four (4) piece EZ Frame Set. This set was created with two specific goals in mind...
1. Create a simplified, less expensive, way to own EZ Frames - one of the most popular and sought after products in the embroidery industry!
2. Allow embroiderers to determine for themselves what additional frames they choose to add to their
collection and when to add them.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Consider Purchasing the Durkee 7in1 EZ Frames are demonstrated demonstrated here on Brother PR6-1000, but applicable to the PRS100 Persona. Purchasing the 7in1 option (in recommended accessories below) ads the 2.5 x 5", Cap Back Frame and 3 x 4 EZ frames. The 7in1 is a separate purchase.
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Four (4) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee M.S.K Embroidery Hoop Deluxe Multi Needle Starter Kit, 11in1 Frames for Brother PR6 PR1000, Baby Lock 6 & 10 Needle Machines
 |
Our Price: $664.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” M.S.K. Hoops for Brother PR6 and PR1000, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Durkee’s Starter Kits feature Durkee Hoops & Frames for Brother and Baby Lock 6 & 10 needle machines as well as their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their 3/16" thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Durkee’s Starter Kits feature Durkee Hoops & Frames for Brother and Baby Lock 6 & 10 needle machines as well as their new Alliance/Persona Single Needle/Tubular Arm machines.
Each kit contains the three (3) most popular size traditional Durkee tubular hoops for these machines: One (1) - 24cm x 24cm (9" x 9"), One (1) - 12.5cm x 24cm (5" x 9"), and One (1) - 15cm x 15cm (6" x 6"). The “Kit” also contains One (1) - Durkee Cap Frame and One (1) - complete EZ Frame 7 Piece Combo Pack.
Stability
Due to their 3/16" thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
See Brent Taylor from Durkee talk about this package at the Houston Virtual Quilt Festival below!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
The Kit contains:One (1) - 24cm x 24cm (9" x 9")
One (1) - 12.5cm x 24cm (5" x 9")
One (1) - 15cm x 15cm (6" x 6")
Seven (7) piece combo pack also includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee PR09RD 3-3/16" Round Hoop Brackets Brother PR600 PR1000 Babylock
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 9cm (3.5") round frame. Fits Brother PR600/Baby Lock machines. Common uses: cuffs, collars, pockets, hat sides.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR12.5x24cm 5x9" Hoop Frame & Brackets for Arm A on Brother PR600's, PR1000, PR1050X, PR1055 Babylock 6-10 Needle Embroidery Machines
|
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee's new and exclusive "EZ Turn" oversized solid brass thumbscrews for easier tightening and loosening for those with arthritic hands or carpal tunnel syndrome.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Zinc/Chromate brackets for additional durability and stability.
Durkee's exclusive LIFETIME warranty on all plastic components.
Common uses: Shirt sleeves, extra large left chest, hand warmer pocket on hoodies, pant legs, extra large right chest and larger designs on short sleeves.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR12RD 4.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050X, Babylock
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
(4 3/8"Diameter) Double height, 12cm (4.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: hat backs, hat sides, smaller left chest.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR1515cmSQ 6x6 Hoop Frame +Brackets for Brother PR600 PR620 PR650 PR655 PR670 PR680 PR1000 PR1050X PR1055 +Babylock Freearm Embroidery Machines
|
Our Price: $42.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 15cm x 15cm (6″×6″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: tote bags, back packs, small jacket backs.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR15RD 5.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050 Babylock
 Durkee PR15RD 5.5" Round Hoop, Brackets, Brother PR600 PR1000 PR1050 Babylock |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Dimensions 5.5" (5 5/8" Diameter), Double height, 15cm (5.5") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: most popular left chest size.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR18RD 7" Round Hoop & Brackets, Brother PR600 PR1000 Babylock
 |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Double height, 18cm (7") round frame. Fits Brother PR600/Baby Lock Series machines. Common uses: larger left chest, small jacket back.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR2424SQ Square 9x9" Hoop & Brackets for Brother PR600 PR620 PR650 PR655 PR670, PR1000, PR1050, Babylock* Sews 8x8" or Split Designs up to 4x8"
|
Our Price: $66.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee PR2424 Most Popular 9x9" Hoop. Also works for 5x7" Designs* With Side Brackets Included for Brother PR600, PR620, PR650, PR1000, BabyLock EMP6, BMP8, BMP9, ENT10, and BNT10 Embroidery Machines using your Arm A, not Arm B. *
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to 8x9" designs on Brother PR machines, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000, and the PR1000e and the Baby Lock EMP6, BMP8, BMP9 and ENT10 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: This item comes in a GREY Color, not available in Black.
Note: Can only use up to 8x9" designs on Brother PR machines, unless you are splitting designs on your embroidery software or Brother's PE Design software first.
Double height, 24cm x 24cm (9″×9″) square frame. Fits Brother PR600/Baby Lock Series machines. Common uses: Children’s clothing, larger square designs that round hoops cannot accommodate.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000, and the PR1000e and the Baby Lock EMP6, BMP8, BMP9 and ENT10 embroidery machines. The hoop carries a LIFETIME WARRANTY on the plastic components and feature Durkee’s exclusive EZ TURN Thumbscrew.
Ships with the brackets attached. Grids not available.
*To embroider a design of 5 x 7" you must allow for the design itself, as well as, the sewing head. The next size up for that from Durkee would be our 9” x 9” hoop. As long as that size hoop will fit into the project you are embroidering, that would be your best bet from Durkee. It also happens to be the most popular hoop size we sell to the home embroidery market.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is great for embroidering children’s clothing and larger square designs that round hoops cannot accommodate.This Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square is constructed of high impact plastic making it virtually indestructible. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square has brass inserts for all screws, light texture on the hooping surface, directional guides, and extra height, which aids in holding thicker, harder to hold garments. The adjusting rings' thumb screws on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are large and long to provide more torque and have a wider space for adjustments. The metal clips on the Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square are extra long, aiding in vibration reduction. The Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square metal clips are zinc plated to provide reduced wear, and they come complete with plastic screws and lock washers.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square Advantages:
Directional guides.
Thumb screw is larger and longer than our competitors'.
Wide space thumb screw adjusting.
Durkee Embroidery Hoop - 24cm x 24cm (9"x9") Square works with:
Brother PR600
Brother PR-600C
Brother 600II
Brother 620
Brother 650
Brother PR1000
Brother PR1000e
Babylock EMP6
Babylock BMP8
Babylock BMP9
Babylock ENT10
Tajima Embroidery Machines
Toyota Embroidery Machines
Renaissance Embroidery Machines
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee PR3015 12x6" Hoop & Brackets for Brother PR6, PR1000, PR1050X, PR1055X, Babylock
 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
30cm x 15cm (12"×6") rectangle frame. Fits Brother PR600/Baby Lock Series machines. Common uses: ideal for projects such as long narrow designs on bags, children’s clothing, or shirt yoke.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000 and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
This hoop fits the Brother PR600, PR-600C, PR600II, PR620, PR650, PR1000 and the Baby Lock EMP6, BMP8, and BMP9 embroidery machines. This hoop carries a 30 day unconditional warranty and a Lifetime Warranty on all plastic components.
Ships with the brackets attached. Grids not available.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee SAC4PCSNXP 4pc Package #6 Single Needle EZ Frames 4in1: 10-5/8x16, 9.5x9.5, 5x7, 4x4 Frames Combo for XP1 XP2 Luminaire and Babylock Solaris
 90944: Durkee Package #6 Single Needle EZ Frames 4in1: 10-5/8x16, 9.5x9.5, 5x7, 4x4 Frames for XP1 Luminaire and Babylock Solaris |
Our Price: $333.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Included in this package are the:
- 7x12
- 5x7
- 6x6
- 4x4
Introduction to EZ Frames for Single Needle Embroidery Machines by Durkee Hoops from Brent Taylor on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Durkee 7in1 EZ Single Frames & Arm: Brother PR600-PR1055, Heavy Duty 3/16" Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8"+Cap Back Ø(Fast Frames+)*
 65692: Durkee SAEZ7MN 7in1 EZ Single Frames Tubular Hoops 3/16" Aluminum for Brother PR6 PR1000 1050X |
Our Price: $349.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
ABOUT THE PRODUCTDurkee‡ frames offer you a simple, yet effective way to hoop your more difficult-to-hoop items. Hold your fabric in place with our adhesive stabilizer and start stitching. This 7-piece set comes with the Main Attachment Arm, (1) 2” x 4”, (1) 2.5” x 4”, (1) 3” x 4”, (1) 5” x 4”, (1) 7” x 5”, and (1) 8” x 8” hoops, and Cap Back/Radius frame. Comes with Durkee’s limited lifetime replacement warranty. Adhesive stabilizer, SA5820 or SA5815 is required. Additional purchase required.
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:
- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Durkee Hoops 5"x9" Baby Onesie Project from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on the Multineedle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames on Multi-Needle Embroidery Machine from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Multi-Needle Machines from Brent Taylor on Vimeo.
Durkee SAEZ7PRS 7in1 EZ Frames for Brother PRS100 & Babylock, Heavy Duty 3/16" Thick Aluminum Tubular Hoops 2x4 2.5x5 3x4 5x4 7x5 8x8+Cap Back/Radius
65755: Durkee SAEZ7PRS 7in1 EZ Frames Tubular Hoops 3/16" Aluminum for Brother PRS100 Persona, Babylock Alliance |
Our Price: $395.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Introducing Durkee “EZ Frames” for Brother PRS100 Persona machine, EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee 7in1 EZ Frames are demonstrated on Brother PR6-1000, but applicable to the PRS100 Persona
Note: The primary uses for the radius frame are: back of hats, deep pockets on backpacks, and to embroider the belly area of embroiderable stuffed animals. But the complete answer is – any item it fits. Also, on the subject of hats, the 2” x4”, 2 ½” x 4”, and 3” x 4” frames are frequently used to embroider the “sides” of hats. Durkee
Stability
Due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength
EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save
A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Durkee 7in1 EZ Frames are demonstrated on Brother PR6-1000, but applicable to the PRS100 Persona
Durkee EZ Frames from Emanuel Neiconi on Vimeo.
Note: The primary uses for the radius frame are: back of hats, deep pockets on backpacks, and to embroider the belly area of embroiderable stuffed animals. But the complete answer is – any item it fits. Also, on the subject of hats, the 2” x4”, 2 ½” x 4”, and 3” x 4” frames are frequently used to embroider the “sides” of hats. Durkee
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Seven (7) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- Cap Back/Radius Frame
Durkee EZ Stitching Video Project Tutorials Featuring Mike Johns
Project #1 Baby Onesies
Applique Monogram Baby Onesie - Single Needle Machine from Brent Taylor on Vimeo.
Project #2 Embroidered Stuffed Animals
Embroidering a Stuffed Animal Using EZ Frames on a Single Needle Machine from Brent Taylor on Vimeo.
Project #3 Christmas Stockings
Christmas Stocking Using Durkee EZ Frames for Single Needle Machines from Brent Taylor on Vimeo.
Project #4 L/R Chest Embroidery
Left-Right Chest Embroidery - Single-Needle Machines from Brent Taylor on Vimeo.
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee SAEZTENPP 10 Needle Power Pack TENPP 10in1 for BR/BL10 Needle Machines, 14x14 Multi Position Sturdi Frame, 7PC Set EZ Frames, Arm, PR Cap Frame
 90978: Durkee Ten Needle Power Pack 10in1 EZ Frames Hoops Set 3/16" Aluminum for Brother PR6 PR10 & Babylock |
Our Price: $699.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Durkee proudly introduces their Ten Needle Power Pack created specifically to “Optimize” ten needle machine owners embroidery experience. This package includes three (3) Best Sellers from Durkee Hoops. Each was designed for its’ own ease of use, practical application for simplifying difficult to hoop items, and for product durability. This package will truly enhance the value and enjoyment of your ten needle machine. The first item is the Durkee 14" x 14" (sewing field) SturdiFrame. It is to be attached to the “B” arms of the 10 needle machine and the frame will be recognized as the 14" x 14" Jumbo hoop. This frame is excellent for split design projects requiring a larger sewing field. Simply apply sticky backing to the underside of the SturdiFrame and slide the frame brackets into the “B” arms of your 10 needle machine. Then, just “float” the item to be embroidered onto the frame and press down to adhere the fabric to the backing and stitch!
Smaller projects...no problem! The second item in the Power Pack is the EZ Frame 7 piece combo pack. This incredibly versatile selection of frame sizes makes difficult to hoop items a breeze. Durkee EZ Frames provide a stable platform for your embroidery projects. Better stability means less bounce, better registration, and better results!
The third member of the Power Pack has literally changed thousands of embroiderers' attitudes from refusing to attempt embroidering caps to self-proclaimed cap embroidery artists...the Durkee Multi-Needle Cap Frame. The Durkee Cap Frame offers a sewing field as large as 5" wide and 4 1/2" tall for logos, special designs, or monograms. Perhaps the best of all is its’ simplicity of use;the cap frame fits into the “A” arm of the ten needle machine just like a traditional hoop.
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Smaller projects...no problem! The second item in the Power Pack is the EZ Frame 7 piece combo pack. This incredibly versatile selection of frame sizes makes difficult to hoop items a breeze. Durkee EZ Frames provide a stable platform for your embroidery projects. Better stability means less bounce, better registration, and better results!
The third member of the Power Pack has literally changed thousands of embroiderers' attitudes from refusing to attempt embroidering caps to self-proclaimed cap embroidery artists...the Durkee Multi-Needle Cap Frame. The Durkee Cap Frame offers a sewing field as large as 5" wide and 4 1/2" tall for logos, special designs, or monograms. Perhaps the best of all is its’ simplicity of use;the cap frame fits into the “A” arm of the ten needle machine just like a traditional hoop.
Introducing Durkee “EZ Frames” for multi-needle Embroidery machines. EZ Frames are a simple, yet effective, system for hooping otherwise difficult to hoop items. Simply apply sticky backing to the underside of the frame with the sticky side up. The adhesive on the backing holds your project in place while the machine is stitching.
*Durkee has less vibration with 3 times the thickness of frames with almost no vibration up and down, compared to Fast Frames.
Stability - due to their thickness and strength, you can stitch comfortably with EZ Frames at 1,000 stitches per minute!
Strength - EZ Frames are constructed with 3/16" anodized aluminum to provide years of consistent, uninterrupted performance. This compares to Fast Frames 1/16" metal frames which have a lot more vibration up and down movements.* EZ Frames also has larger Thumb Screws for ease of tightening and loosening.
Save - A lower purchase price means up-front savings and higher operating speeds
means more production in less time!
Extended US Warranty: Limited Lifetime
Non-US Warranty: 30 days parts and labor.
Specifications
Eight (8) piece combo pack includes the Main Attachment Arm and one (1) each of the following frames:- 2" x 4"
- 2.5" x 4"
- 3" x 4"
- 5" x 4"
- 7" x 5"
- 8" x 8"
- 12" x 8"
- Cap Back/Radius Frame
DURKEE HOOP GUARANTEE
It is our pleasure to detail the guarantee provided for our tubular hoop line. We guarantee the plastic component of the round hoops for a lifetime against manufacturer's defects.
We will exchange the plastic component at no cost provided the breakage is not due to abuse or using the parts in a manner not consistent with commercial embroidery practices.
Durkee “Plus” Size Board Attachment Slides on Top of HP2 Project Station
 |
Our Price: $150.00 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
You must already have the existing HP2 station to use this attachment.
This video explains all three additional station options for the HP2 Product Station.
Non-US Warranty: 30 days parts and labor.
Fast Frames 080 5.5x6" Area, Single Frame Hat Hoop with Side Brackets, Brother PR and Multi Needle Embroidery Machine Brands and Models
 41167: Fast Frames 080 Single Frame Hat Hoop with Brackets, Brother PR and Multi Needle Embroidery Machine |
Our Price: $219.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This brand new single piece Fast Frames flat hat hoop will revolutionize the way you embroider hats. This is an independent frame that will fit on all machine types, giving them the ability to embroider an area of 5.5x6.
These are attach to the arm of the Brother PR and other Brands of muliti-needle embroidery machines.
The flat single frame design will allow you to clip the hoop directly into your machine and get to embroidering.
Available for the following Machines:
Brother PRs100, PR600-655E, PR1000E-1050X
EMT/AMA 15.5"
Janome MB4
Tajima 14", 19.5"
Ricoma 14"
SWF 14", 15.5", 19.5"
EMB 18.5"
Barudan 14", 20.25"
Happy 14", 19.5", 20.25"
ZSK 15.75", 19"
Highland 15.5"
Camfive
Butterfly 15.5"
Meistergram 15"
These are attach to the arm of the Brother PR and other Brands of muliti-needle embroidery machines.
The flat single frame design will allow you to clip the hoop directly into your machine and get to embroidering.
Available for the following Machines:
Brother PRs100, PR600-655E, PR1000E-1050X
EMT/AMA 15.5"
Janome MB4
Tajima 14", 19.5"
Ricoma 14"
SWF 14", 15.5", 19.5"
EMB 18.5"
Barudan 14", 20.25"
Happy 14", 19.5", 20.25"
ZSK 15.75", 19"
Highland 15.5"
Camfive
Butterfly 15.5"
Meistergram 15"
Non-US Warranty: 30 days parts and labor.
Specifications
Fast Frames Hat HoopsFast Frames Instructions for Embroiderying the Back of Hats
Instructions for Embroiderying with the Single Frame Hat Hoop
Fast Frames 101-012 12x14" Jumbo Hoop w/12x7" Sewing Field, SAFF012 Brother PR600 PR620 PR650 PR655 PR670 PR680, Babylock 6 Needle Embroidery Machines
 13872: Fast Frames 101-012 12x14" Jumbo Hoop SAFF012 Brother PR600 650 655 670 BL |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Fast Frames 101-012 is a stand along frame and does not use the arms that come with 7in1 or 8in1 Fast Frames package. It snaps into the arms that come with your Brother PR machine.
Great for large or heavy items like quilting squares, blankets, rugs, etc. Has an embroidery field of 12” x 14” and other customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
*Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
*Requires Brother PE Design or embroidery software on your computer to split the design in two, before running both sides in this 14x12" hoop. Embroider up to 7X12" then turn around for another 7X12" for a merged 14x14" design. Need to create a custom hoop in PE Design Next in order for the design to split. This is located in the design page settings. It is called Extra Large embroideries in the instruction manual.
Embroider up to 7x12" then turn around for another 7x12" for a merged 14x12" design. Hoop frame for uses adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
Great for large or heavy items like quilting squares, blankets, rugs, etc. Has an embroidery field of 12” x 14” and other customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
*Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
*Requires Brother PE Design or embroidery software on your computer to split the design in two, before running both sides in this 14x12" hoop. Embroider up to 7X12" then turn around for another 7X12" for a merged 14x14" design. Need to create a custom hoop in PE Design Next in order for the design to split. This is located in the design page settings. It is called Extra Large embroideries in the instruction manual.
Embroider up to 7x12" then turn around for another 7x12" for a merged 14x12" design. Hoop frame for uses adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
- 12" x 14" Hooping area. Require
- For use with the Brother PR-600, 620, 650, 655E, PR1000, PR1000e and Babylock EMP6, BND9, BNT10L, BMP8/9, ENT10
- Expand your embroidery options! Take your PR600 series machine to the next level with this jumbo hoop. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Click HERE for Fast Frames Instructions
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
For use with: Entrepreneur® PR650, Entrepreneur® PR650e, Entrepreneur® PR655, Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e, PR-600, PR600II, PR620, PR-655C
Non-US Warranty: 30 days parts and labor.
Specifications
Fast Frames 101-014 Military Name Tag Tape Embroidery Hoop for Brother PR600 PR620 PR650 PR655 PR670 PR680 PR1000 PR1050 PR1055 +Babylock Multi Needle
 39835: Fast Frames 101-014 Military Name Tag Tape Embroidery Hoop for Brother PR600 PR620 PR650 PR655 PR670 PR1000 PR1050/55 + Babylock Multi Needle Machines |
Our Price: $349.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 3-4 business days. Condition: New In Box |
Features
Military Name Tape Fast Frames FULL FRAME (no 7 in 1 Exchange Needed) 101-014. Mounts on regular arms that come with your embroidery machine, does not require special arms from Fast Frames.
Fast Frames Military Name Tape Embroidery Hoop is the perfect hoop for embroidering names on ribbon or tape. The Fast Frames Military Name Tape Embroidery Hoop is a high quality stainless and aluminum embroidery frame for hoopless embroidery. This Fast Frames Military Name Tape Embroidery Hoop is not for single needle home embroidery machines.
Fast Frames Military Name Tape Embroidery Hoop benefits:
Fast Frames Military Name Tape Embroidery Hoop is the perfect hoop for embroidering names on ribbon or tape. The Fast Frames Military Name Tape Embroidery Hoop is a high quality stainless and aluminum embroidery frame for hoopless embroidery. This Fast Frames Military Name Tape Embroidery Hoop is not for single needle home embroidery machines.
Fast Frames Military Name Tape Embroidery Hoop benefits:
- Cuts your hooping time down to two seconds.
- Relieves carpel tunnel.
- Helps achieve excellent repeatability.
- Great for multi head operations.
Fits on:
- Brother PR-600, PR-600II, PR-620
- Entrepreneur PR-650
- Entrepreneur Pro PR-1000
- Baby Lock Embroidery Professional BMP6, BMP8
- Embroidery Professional Plus BMP9
- Enterprise BNT10
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fast Frames Name Tag Frame Instructions Video. This is a video on how to install A Fast Grames Name Tag Frame
Non-US Warranty: 30 days parts and labor.
Specifications
Approximate Interior Dimensions inside Hoop Opening: 8" L x 2" WApproximate Exterior Demensions Whole Hoop 17 1/2" L x 4 1/2" W
The Fast Frames Military Nametape Hoop mounts on the regular arms that come with your embroidery machine, and does not require special arms from Fast Frames.
Fast Frames 101-015 Karate & Belt Hoop Frame 3x9" for Brother PR6 to PR1000, PR1050X PR1055X, Babylock Multi Needle Machines
 39836: 39836: Fast Frames 101-015 Karate & Belt Hoop Frame for PR6 to PR1000, PR1050X PR1055X |
Our Price: $339.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Karate Belt Fast Frames FULL FRAME (no 7 in 1 Exchange Needed) 101-015 102-015
Fast Frames Karate Belt Embroidery Frame are high quality stainless and aluminum embroidery frames for hoopless embroidery. The Fast Frames Karate Belt Embroidery Frame fit on a tubular hoop holder.These Fast Frames Karate Belt Embroidery Frame are not for single needle home embroidery machines.
Fast Frames Karate Belt Embroidery Frame benefits:
Fast Frames Karate Belt Embroidery Frame are high quality stainless and aluminum embroidery frames for hoopless embroidery. The Fast Frames Karate Belt Embroidery Frame fit on a tubular hoop holder.These Fast Frames Karate Belt Embroidery Frame are not for single needle home embroidery machines.
Fast Frames Karate Belt Embroidery Frame benefits:
- Cuts your hooping time down to 10 seconds.
- Has a 3" x 9" embroidery field.
- Relieves carpel tunnel.
- Helps achieve excellent repeatability.
- Great for multi head operations.
Fast Frames Karate Belt Embroidery Frame will fit on:
- Brother PR-600, PR-600II, PR-620.
- Entrepreneur PR-650.
- Entrepreneur Pro PR-1000.
- Baby Lock Embroidery Professional BMP6, BMP8.
- Babylock Embroidery Professional Plus BMP9.
- Enterprise BNT10.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Fast Frames Karate and Belt Frame (not for Dog Collars unless very long) Instructions
Non-US Warranty: 30 days parts and labor.
Specifications
Fast Frames makes your embroidery that much easier! This Dog Collar / Karate Belt Frame is designed for the following embroidery machines:Brother PR-600, PR-600II, PR-620, Entrepreneur PR-650, Entrepreneur Pro PR-1000
Baby Lock Embroidery Professional BMP6, BMP8, Embroidery Professional Plus BMP9, Enterprise BNT10
Fast Frames Karate Belt Dog Collar Embroidery Frame are high quality stainless and aluminum embroidery frames for hoopless embroidery. The Fast Frames Karate Belt Dog Collar Embroidery Frame fit on a tubular hoop holder.These Fast Frames Karate Belt Dog Collar Embroidery Frame are not for single needle home embroidery machines.
Fast Frames Karate Belt Dog Collar Embroidery Frame benefits:
Cuts your hooping time down to 5 seconds.
Relieves carpel tunnel.
Helps achieve excellent repeatability.
Great for multi head operations.
Fast Frames Karate Belt Dog Collar Embroidery Frame will fit on:
Brother PR-600, PR-600II, PR-620.
Entrepreneur PR-650.
Entrepreneur Pro PR-1000.
Baby Lock Embroidery Professional BMP6, BMP8.
Embroidery Professional Plus BMP9.
Enterprise BNT10.
Fast Frames 101-020-013 Lg 11x7" Hoop Frame, Add on For 7in1 on Brother PR6, PR1000, PR1050X, PR1055X and Babylock Multi Needle Embroidery Machines
 24126: Fast Frames 101-020-013 Lg 11x7" Hoop Frame, Add on For 7in1 on Brother PR6, PR1000, PR1050X, PR1055X and Babylock Multi Needle Embroidery Machines |
Our Price: $49.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This is an Add on Hoop, and Requires the Exchange Arm, or 7in1 or 8in1 set for use.
- 7" x 11 Hooping area, not the 12x14" image shown.
- For use in conjunction with the Exchange Arm for the the Brother PR-600, 620, 650, 655, PR1000, PR1000E, Babylock EMP6, BMP6, BMP8, ENT10, BND9, BNT10 Embroidery Machines.
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment).
Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc.
Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Click HERE for Fast Frames Instructions
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
Fast Frames 101-022 SAFF022 7 in 1 Arm +7 Tubular Hoops for Brother PR600 PR620 PR650 PR655 PR670 PR680 Babylock BMP EMP 6 Needle Embroidery Machines
 13870: Fast Frames 101-022 7in1 Arm & Tubular Hoops Brother PR600-670, Babylock |
Our Price: $384.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: New 8 in 1 Fast Frames Sets are in stock with extra 12x7" hoop for Brother PR600 and 14x7" Hoops which fit on Fast Frame Arm for PR1000 and Brother PR600 620 650 Babylock EMP BMP Embroidery Machines
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
- The hoop attachment holding arm for PR600 series
- 2" X 4" Mono Hoop
- 2.5" X 4" Pocket Hoop
- 3" X 4" Pocket Hoop
- 5" X 4" Christmas Stocking Hoop
- 6” Radius hat hoop for sides and backs of hats and caps
- 7" X 5" Attache case hoop
- 7"X 7" Deep Bag HOOP
Key Benefits:
- Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
- Relief from carpel tunnel
- Excellent repeatability, great for multi head operations
Please note: Since this is not a Brother built product, PR600 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Click HERE for Fast Frames Instructions
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
How To Use Fast Frames Part 1 and 2 with a multineedle machine. By Jennifer Allen. You can find my website at www.handmadexoxo.etsy.com or on Facebook www.facebook.com/handmadeXOXO
Fast Frames 101-025 8in1 Hoops +12x7" for Brother PR600, PR620, PR650, PR655, PR670E, Babylock 6 Needle Embroidery Machines, 21 Stabilizer Samples
 38595: Fast Frames 101-025 8in1 Hoops +12x7" for Brother PR655E, PR670E, Babylock |
Our Price: $379.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Includes 4 Tubular Bag, Hat, Pocket, Sock Hoops, 2 Flat Hoops, Bonus 12x7" Hoop, 19.25" Fast Frames Arms, for Brother PR600, PR620, PR650, PR655, PR670E, plus Babylock EMP BMP 6 Needle Embroidery Machines.
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames 8 in 1 hoop set comes with 1 hoop holder arm, plus 6 sizes of single tubular and flat hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames 8 in 1 hoop set comes with 1 hoop holder arm, plus 6 sizes of single tubular and flat hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
- The 19.25" wide hoop attachment holding arm for Brother PR600 series, Babylock EMP BMP
- 2" X 4" Mono Hoop
- 2.5" X 4" Pocket Hoop
- 3" X 4" Pocket Hoop
- 5" X 4" Christmas Stocking Hoop
- 6” Radius hat hoop for sides and backs of hats and caps
- 7" X 5" Attache case hoop
- 7"X 7" Deep Bag HOOP
-
12x7" Tubular Hoop Frame for Larger Handbags, Etc.
Key Benefits:
- Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
- Relief from carpel tunnel
- Excellent repeatability, great for multi head operations
Please note: Since this is not a Brother built product, PR600 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment).
Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc.
Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Non-US Warranty: 30 days parts and labor.
Specifications
Fast Frames 101-032 Deep Bag Hoop Frame 12x8" Brother PR6, PR1000, Babylock
 39831: Fast Frames 101-032 Deep Bag Hoop Frame 12x8" Brother PR6, PR1000 |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes). Brother machines do not recognize Fast Frames on screen so it assumes it is the largest width 12".
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Fast Frames 101-033 Largest Square Bag Hoop Frame 8x8in for Brother PR600 PR620 PR650 PR655 PR655X, PR670E, PR1000 PR1050X and BL Embroidery Machines
 39834: Fast Frames 101-033 Bag Hoop Frame 8x8" for Brother PR6-10, Babylock |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Fast Frames 101-034 Sleeve Leg Bag Hoop 4.5x8" for PR6 PR1000 PR1050X, PR1055X, Babylock Multi Needle Embroidery Machines
 39833: Fast Frames 101-034 Sleeve Leg Bag Hoop 4.5x8" for PR6 PR1000 PR1050X |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Fast Frames 102-012 14x14" Jumbo Hoop Brother PR1000 PR1050X PR1055x, Babylock Multi Needle Embroidery Machines
33291: Fast Frames 102-012 14x14" Jumbo Hoop Brother PR1000 PR1050X, Babylock |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time! This Jumbo Frame allows you to use a large sew field area by splitting your design.
*Requires Software that will Split Designs. Requires Brother PE Design or other software on your computer to split the design in two, before running both sides in your 14x14" hoop. Embroider up to 7x14" then turn around for another 7x14" for a merged 14x14" design. Needs to create a custom hoop in PE Design Next in order for the design to split. This is located in the design page settings. It is called Extra Large embroideries in the instruction manual.
Hoop frame for uses adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 14” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
*Requires Software that will Split Designs. Requires Brother PE Design or other software on your computer to split the design in two, before running both sides in your 14x14" hoop. Embroider up to 7x14" then turn around for another 7x14" for a merged 14x14" design. Needs to create a custom hoop in PE Design Next in order for the design to split. This is located in the design page settings. It is called Extra Large embroideries in the instruction manual.
Hoop frame for uses adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 14” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
- 14" x 14" Hooping area
- For use with the Brother PR1000 and Babylock ENT10, BNT10
- Expand your embroidery options! Take your PR600 series machine to the next level with this jumbo hoop. With an embroidery field of 14” x 14”, now you can enjoy even more customization options. Sew 14” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Click HERE for Fast Frames Instructions
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
Fast Frames 102-022 (Brother SAFF022) 7in1 Arm & 7 Tubular Hoops for Brother Freearm PR1000 PR1050X, PR1055X Babylock ENT BNT
 38771: Fast Frames 102-022 (Brother SAFF022) 7in1 Arm & Hoops Brother PR1000, PR1050X, Babylock |
Our Price: $379.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Compare 8in1 for $50 More! Fast Frames 8in1 Hoop Set, Brother PR1000 PR1000E Babylock ENT BNT10, Free 27 Floriani* 4 Tubular Bag Hat Pocket Sock Hoops, 2 Flat +14x7" +Arm 22"W
Note: New 8 in 1 Fast Frames Sets are in stock with extra 12x7" hoop for Brother PR600 and 14x7" Hoops which fit on Fast Frame Arm for PR1000 and Babylock Embroidery Machines
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
Note: New 8 in 1 Fast Frames Sets are in stock with extra 12x7" hoop for Brother PR600 and 14x7" Hoops which fit on Fast Frame Arm for PR1000 and Babylock Embroidery Machines
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
- The hoop attachment holding arm for PR1000 series
- 2" X 4" Mono Hoop
- 2.5" X 4" Pocket Hoop
- 3" X 4" Pocket Hoop
- 5" X 4" Christmas Stocking Hoop
- 6” Radius hat hoop for sides and backs of hats and caps
- 7" X 5" Attache case hoop
- 7"X 7" Deep Bag HOOP
Key Benefits:
- Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
- Relief from carpel tunnel
- Excellent repeatability, great for multi head operations
Please note: Since this is not a Brother built product, PR1000 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
Fast Frames is a hoop less embroidery frame.
Stick on backing is placed on the underside.
The adhesive backing is exposed in the open sew space of the frame.
Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment).
Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example).
Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape.
The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Click HERE for Fast Frames Instructions
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
How To Use Fast Frames Part 1 and 2 with a multineedle machine. By Jennifer Allen. You can find my website at www.handmadexoxo.etsy.com or on Facebook www.facebook.com/handmadeXOXO
Fast Frames 102-032 Largest Deep Bag Hoop 14x7" for Brother PR1000, PR1050X, Babylock BNT10L, BMV10 Embroidery Machines
 39832: Fast Frames 102-032 Deep Bag Hoop 14x8" for Brother PR1000, PR1050X, Babylock BNT10 |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Fast Frames 103-014 Military Nametape Hoop Frame for Brother PRS100 Persona, Babylock BNAL Alliance
 79146: Fast Frames 103-014 Military Nametape Hoop Frame for Brother PRS100 |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Key Benefits
- Hooping in 2 seconds.
- Relief from carpel tunnel.
- Excellent repeatability, great for multi head operations.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing, mounts on regular arms that come with your embroidery machine, does not require special arms from Fast Frames.
Fast Frames Name Tag Frame Instructions Video. This is a video on how to install A Fast Grames Name Tag Frame
Non-US Warranty: 30 days parts and labor.
Specifications
The Fast Frames Military Nametape Hoop mounts on the regular arms that come with your embroidery machine, and does not require special arms from Fast Frames.Fast Frames 103-022 X-Change 7in1 Arm & 7 Tubular Hoops for Brother Persona PRS100, Babylock Alliance BNAL Embroidery Machines
64057: Fast Frames 103-022 7in1 Arm & Tubular Hoops, Brother Persona PRS100 |
Our Price: $379.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
Fast Frames 7in1 comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
The hoop attachment holding arm for PRS100 Persona Series, plus:
Fast Frames 7in1 comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:
The hoop attachment holding arm for PRS100 Persona Series, plus:
- 2" X 4" Mono Hoop
- 2.5" X 4" Pocket Hoop
- 3" X 4" Pocket Hoop
- 5" X 4" Christmas Stocking Hoop
- 6” Radius hat hoop for sides and backs of hats and caps
- 7" X 5" Attache case hoop
- 7"X 7" Deep Bag HOOP
Key Benefits:
- Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
- Relief from carpel tunnel
- Excellent repeatability, great for multi head operations
Please note: Since this is not a Brother built product, PRS100 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
Click HERE for Fast Frames Instructions
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
How To Use Fast Frames Part 1 and 2. By Jennifer Allen. You can find my website at www.handmadexoxo.etsy.com or on Facebook www.facebook.com/handmadeXOXO
Fast Frames 190-022 X-Change 7in1 Arm & Tubular Hoops, Juki Tajima SAI 16" 7-n-1 Set
 Fast Frames 190-022 X-Change 7in1 Arm & Tubular Hoops, Juki Tajima SAI 16" 7-n-1 Set |
Our Price: $379.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Fast Frames 190-022 X-Change 7in1 Arm & Tubular Hoops, Juki Tajima SAI 16" 7-n-1 Set
Extended US Warranty: 90 Days labor on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Fast Frames 103-033 Deep Bag Hoop 8x8" for Brother Persona PRS100, Babylock Alliance BNAL Embroidery Machines
64056: Fast Frames 103-033 Deep Bag Hoop 8x8" for Brother Persona PRS100 BNAL |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This frame is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Fast Frames 103-034 Sleeve Leg Bag Hoop 4.5x8" for Brother PRS100 Persona, Babylock Alliance BNAL Single Needle Embroidery Machines
 66225: Fast Frames 103-034 Sleeve Leg Bag Hoop 4.5x8" for Brother PRS100 Persona |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
This frame is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes). This hoop fits directly on the arms of your embroidery machine, so all you add is sticky stabilizer and garment for embroidering.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Fast Frames 5.5x6" Add On Hat Hoop, Front to Back Flat Cap Frame for All FF Arms on Brother PR and Multi Needle Embroidery Machines
 83227: Fast Frames Add On Hat Hoop, Front to Back Flat Cap Frame, for All FF Arms |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This brand new single piece Fast Frames flat hat hoop will revolutionize the way you embroider hats.
This product will make it a lot easier to do the Front, Back and Sides of caps. The new Fast Frames hat hoop add-on allows simple and quick embroidery of hats. Since this is an add-on hoop it will connect right into your Fast Frame arm. If you do not have a Fast Frames arm you can order one in 7 n 1
These are able to attach to any Fast Frame Arm for any multi needle embroidery machine
IN ORDER TO USE THIS ADD ON, YOU WILL NEED TO ALREADY HAVE A FAST FRAME ARM
If you do not have a Fast Frames arm you can order one in the 7 in 1 kit.
This product will make it a lot easier to do the Front, Back and Sides of caps. The new Fast Frames hat hoop add-on allows simple and quick embroidery of hats. Since this is an add-on hoop it will connect right into your Fast Frame arm. If you do not have a Fast Frames arm you can order one in 7 n 1
These are able to attach to any Fast Frame Arm for any multi needle embroidery machine
IN ORDER TO USE THIS ADD ON, YOU WILL NEED TO ALREADY HAVE A FAST FRAME ARM
If you do not have a Fast Frames arm you can order one in the 7 in 1 kit.
Non-US Warranty: 30 days parts and labor.
Hoop Grip 75-214 Rubber Tape 1/4in Wide x 9 Yards Package, Designed for Inside 2 Piece Embroidery Hoops, to Prevent Fabric Slippage and Hoop Burn
 59106: Hoop Grip 75-214 Rubber Tape 1/4" Wide x 9 Yards, Prevents Fabric Slippage |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Hoop Grip adheres to the outside of your inner hoop to keep fabric from slipping. Designed for all embroidery hoops. 1/4"W x 9yds.
Non-US Warranty: 30 days parts and labor.
Hoop Tech 599530 3.0x3.75in Pocket Clamp+599555 Framing Gauge. Add Required Brother Babylock Cap Driver for PR600 PR620 PR650 PR655 If You Don't Have
 96108: Hoop Tech 599812 3.0x3.75in Pocket Clamp+599555 Framing Gauge. Add Required Brother Babylock Cap Driver for PR1000 PR1000E PR1050X If You Don't Have |
Our Price: $329.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Pocket Clamp series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech Pocket Clamps.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Pocket Clamps, although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Pocket Clamps, although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
Non-US Warranty: 30 days parts and labor.
Hoop Tech 599555 Framing Gauge Only for HoopTech Pocket Clamps on Brother, Bernina E16, MELCO BRAVO/TAJIMA/TOYOTA/BRO1201/SWF/ZSK
 |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
for use with POCKET (micro) CLAMPS Sold Separately. Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
The pocket clamp series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
The pocket clamp series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts.
Non-US Warranty: 30 days parts and labor.
Hoop Tech 599796 Roller Stand for Janome MB4 MB7 Embroidery Machines
 63521: Hoop Tech 599796 Roller Stand for Janome MB4 MB7 Embroidery Machines |
Our Price: $699.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Non-US Warranty: 30 days parts and labor.
Specifications
Hoop Tech 599919 3.0x3.75in Pocket Clamp+ 599555 Framing Gauge. Clamp Attaches to your existing Brother Babylock PR1000 PR1000E PR1050X Cap Driver
 96108: Hoop Tech 599812 3.0x3.75in Pocket Clamp+599555 Framing Gauge. Add Required Brother Babylock Cap Driver for PR1000 PR1000E PR1050X If You Don't Have |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Pocket Clamp series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech Pocket Clamps.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Pocket Clamps, although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Pocket Clamps, although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
Non-US Warranty: 30 days parts and labor.
HoopMaster Hooping Station for Brother PR600, PR650, PR655, PR670, PR680, PR1000, PR1050 PR1055 Hoops, Babylock Multi Needle Embroidery Machine Hoops
 HoopMaster Hooping Station for Brother PR600, PR650, PR655, PR670, PR680, PR1000, PR1050 PR1055 |
Our Price: $799.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
HoopMaster is a Revolutionary Tubular Hooping System. The Fixture is designed to be used on the
Station or the Freestyle Arm
The HoopMaster Station, FreeStyle Arm Portable Base
T-Square, Pocket Guide, and 100x100 size Fixture with FreeStyle Arm
300x200/ 360x200 fixture, 180x130 fixture, 60x40 fixture
Midwest Products has created an embroidery hooping system which is simple in design and built to withstand the punishment of a commercial embroidery environment. Even the most inexperienced employee will find it easy to use. HoopMaster will have new employees hooping quickly and accurately in no time at all. Your productivity and profitability will increase as well as the quality control your customers deserve. Put this innovative system to work for you. The many time saving and profit building features will quickly pay for themselves.
Station or the Freestyle Arm
The HoopMaster Station, FreeStyle Arm Portable Base
T-Square, Pocket Guide, and 100x100 size Fixture with FreeStyle Arm
300x200/ 360x200 fixture, 180x130 fixture, 60x40 fixture
Midwest Products has created an embroidery hooping system which is simple in design and built to withstand the punishment of a commercial embroidery environment. Even the most inexperienced employee will find it easy to use. HoopMaster will have new employees hooping quickly and accurately in no time at all. Your productivity and profitability will increase as well as the quality control your customers deserve. Put this innovative system to work for you. The many time saving and profit building features will quickly pay for themselves.
Extended US Warranty: 1 year replacement on defective or missing parts.
Non-US Warranty: 30 days parts and labor.
Specifications
HoopMaster for Brother PR-6xx series, PR 1000 series, or Baby Lock 6 &10 needle machinesThis kit is for all 6 needle & 10 needle Brother & Baby Lock Machines:
- Brother PR600 Series (PR600, PR600II, PR600C, PR620, PR620II, PR650, PR650E, PR655) & Entrepreneur Pro PR-1000 Series (PR1000, PR1000E)
- Baby Lock (EMP6, BMP8, BMP9, ENT10, BNT10L, BND9, BND9-2) & Enterprise BNT10
HoopTech 599374 Metal Roller PR6STAND w/Cap Post, Shelf, 4Casters 4Feet, Brother PRS100 PR6 PR10 Babylock Multi Needle Embroidery Machines, Heat Press
 21888: HoopTech 599374 Metal Roller PR6STAND: Brother PRS100, PR6-1000, PR1050X, Babylocks |
Our Price: $669.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
This was the Brother Original 22x22x32"High, All Metal Roller Table Stand, 8 Feet on Floor, now modified for Brother PRS100, PR620, PR650, PR655, PR670, PR1000, PR1050X, PR1055X, Babylock Alliance, EMP6, BMP8, BMP9, ENT10, BNT10, Etc. Embroidery Machines.
HOOP TECH was the DESIGNER and ORIGINAL producer of the machine stands for the PR-600 machines. The rugged design, stability and ease of assembly has made it a standard in the industry. Features include, a large shelf, height adjustable framing gage support, lock down brackets to securely attach the machine to the stand, easy rolling casters and leveling pads on outrigger brackets for added stability. The heavy duty stand is all steel construction with a durable powder coat finish and is made right here in the United States.
The Hoop Tech Embroidery Machine Stand for Brother PRS100 PR600 620 650 1000 will be the best investment you can make for your Brother PR embroidery machine. The Hoop Tech Embroidery Machine Stand for Brother PRS100 PR600 620 650 1000 makes embroidering easier than ever before with your machine. The Hoop Tech Embroidery Machine Stand for Brother PRS100, PR600 620 650 1000 is made specifically for the Brother PRS100, PR600 620 650 and 1000. It is also compatible with Baby Lock 1, 6 and 10 needle embroidery machines.
HOOP TECH was the DESIGNER and ORIGINAL producer of the machine stands for the PR-600 machines. The rugged design, stability and ease of assembly has made it a standard in the industry. Features include, a large shelf, height adjustable framing gage support, lock down brackets to securely attach the machine to the stand, easy rolling casters and leveling pads on outrigger brackets for added stability. The heavy duty stand is all steel construction with a durable powder coat finish and is made right here in the United States.
The Hoop Tech Embroidery Machine Stand for Brother PRS100 PR600 620 650 1000 will be the best investment you can make for your Brother PR embroidery machine. The Hoop Tech Embroidery Machine Stand for Brother PRS100 PR600 620 650 1000 makes embroidering easier than ever before with your machine. The Hoop Tech Embroidery Machine Stand for Brother PRS100, PR600 620 650 1000 is made specifically for the Brother PRS100, PR600 620 650 and 1000. It is also compatible with Baby Lock 1, 6 and 10 needle embroidery machines.
- This machine stand measures 22"x22"x32"
- Stand on Wheels has been constructed exclusively for the PR600 and PR620, and measures 22" wide, 22" deep, and 32" tall
- Four 2 1/4" diameter adjustable foot pad stabilizers to reduce vibration.
- Has 4 heavy duty large rolling casters plus 4 more stabilizer feet, a total of 8 feet which reduce vibration.
- Has shelf underneath for extra hoop storage
- Perfect mobility for moving around the room or rolling into a building.
- Ships RTA Ready to Assemble
Hoop Tech Stand Features:
- Easy to assemble
- All steel construction
- Rugged powder coat finish
- Large shelf area
- 2-Lock down brackets
- Easy rolling casters
- Leveling feet for stability
- Made in America
Compatible with:
Brother PRS100 Persona
Brother PR600
Brother PR600II
Brother PR620
Brother PR650
Brother PR655
Brother PR670
Brother PR1000
Brother PR1050X
Babylock BNAL Alliance
Baby Lock 6 Needle Models
Baby Lock 10 Needle Models
Non-US Warranty: 30 days parts and labor.
Specifications
Brochure on HoopTech 599374 Metal Roller PR6STAND: Brother PRS100, PR6-1000, PR1050X, BabylockHOOP TECH was the DESIGNER and ORIGINAL MLproducer of the machine stands for the PR-600 machines. The rugged design, stability and ease of assembly has made it a standard in the industry. Features include, a large shelf, height adjustable framing gage support, lock down brackets to securely attach the machine to the stand, easy rolling casters and leveling pads on outrigger brackets for added stability. The heavy duty stand is all steel construction with a durable powder coat finish and is made right here in the United States.
The HOOP TECH embroidery machine stands were re-designed to fit the new Persona PRS 100 as well as all of the PR Series machines and Baby Lock Series. The new stand is still the same rugged heavy duty design with the added feature of (2) positive hold down brackets to keep your machine securely attached to the top of the stand. The stands ship complete in one box and are easy to assemble with just a couple of 7/16” wrenches.
- Measures 22" wide, 22" deep, and 32" tall.
- 4 stabilizer feet.
- Locking wheels.
- A hat jig post
- Large storage shelf.
- Ideal for convenient transportation.
- Four 2 1/4" diameter adjustable foot pads.
- Adjustable height cap framing gauge bar
- Solid metal to support your machine
- 4 heavy duty rolling casters and 4 stabilizer feet to reduce vibration
- Built In Shelf for extra embroidery hoop and notion storage
- Easy to move on multiple floor surfaces
- Ships ready to assemble
- This machine stand measures 22"x22"x32"
Compatible with:
- Brother PRS100
- Brother PR600
- Brother PR600II
- Brother PR620
- Brother PR650
- Brother PR655
- Brother PR1000
- Baby Lock 6 Needle Models
- Baby Lock 10 Needle Models
Hoop Tech Brother PR Stands Brochure
HoopTech 599399 7in1 Quick Change Tubular Hoops, Brother PR6 & Babylock
 |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Quick Change is a set of interchangeable sewing windows designed to be used with a pressure sensitive or sticky backing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
*Bracket on photos may differ in appearance depending on your brand and model machine
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
*Bracket on photos may differ in appearance depending on your brand and model machine
Non-US Warranty: 30 days parts and labor.
Specifications
Click here for Quick Change InstructionsHoopTech 599399-6in1 Quick Change Tubular Hoops, Brother PR & Babylock
 |
Our Price: $244.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Quick Change is a set of interchangeable sewing windows designed to be used with a pressure sensitive or sticky backing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
*Bracket on photos may differ in appearance depending on your brand and model machine
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
*Bracket on photos may differ in appearance depending on your brand and model machine
Non-US Warranty: 30 days parts and labor.
Specifications
Click here for Quick Change InstructionsHoopTech 599429 Brother SAPR34 3x5" Slimline 3pc Window Clamp for PR and Babylock
 HoopTech 599429 Brother SAPR34 3x5" Slimline 3 pc. Window Clamp PR Babylock (chassis sold separately) |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Retail Store Only Condition: New In Box |
Features
3" Wide x 5" Tall
Note: Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment and Window Frame Holding Arms under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.
Non-US Warranty: 30 days parts and labor.
Specifications
HoopTech 599432 Brother SAPR4x4" Slimline Badges 3 Pc. Window Clamp Set for PR & Babylock, Requires Hoop Tech 599441 SAPRB Chassis Base Unit
 HoopTech 599432 Brother PR SAPR4x4" Slimline Badges 3 Pc Window Clamp (chassis sold separately) |
Our Price: $128.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: 3 piece set comes with one (1) base adapter window and two (2) clamping windows. Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment. Chassis shown in photos sold separately. Click here to view the compatible chassis or view it under Recommended Accessories below.
Brother HoopTech SAPR44, 4x4" Window Frame Attaches to Gator Clamp Chassis Base Unit for Brother PR600 PR620 PR650 PR1000 and Babylock EMP BMP ENT BNT
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Brother HoopTech SAPR44, 4x4" Window Frame Attaches to Gator Clamp Chassis Base Unit for Brother PR600 PR620 PR650 PR1000 and Babylock EMP BMP ENT BNT
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
HoopTech 599561 Brother SAPR6x5 SlimLine 3pc Window Clamp for Brother PR & Babylock, Requires Hoop Tech SAPRB6 Chassis Attachment Window Frame Holder*
 HoopTech 599435 Brother SAPR6x5" SlimLine 3 pc. Window Clamp Brother PR (chassis sold separately) |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
Note: 3 piece set comes with one (1) base adapter window and two (2) clamping windows. Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment. Chassis shown in photos sold separately. Click here to view the compatible chassis or view it under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
HoopTech 599438 Slimline SAPR5RD, 5" Round 2 Piece Window Clamp for Brother PR6 PR10, Babylock Multi Needle Embroidery Machines
 HoopTech 599438 Slimline SAPR5RD, 5" Round Window Clamp for Brother PR6 PR10 (chassis sold separately) |
Our Price: $139.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: 3 piece set comes with one (1) base adapter window and two (2) clamping windows. Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment. Chassis shown in photos sold separately. Click here to view the compatible chassis or view it under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
Non-US Warranty: 30 days parts and labor.
Specifications
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
HoopTech 599441 Chassis Base Unit Clamp For 3pc Slimline Window Frames on Brother PR600-1055 and BabyLock Multi Needle Embroidery Machines
 29361: Hoop Tech 599441 Chassis Base Unit Clamp For 2pc Slimline Window Frames on Brother PR600-1050 and BabyLock Multi Needle Embroidery Machines |
Our Price: $329.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
*Hoop Tech Base Unit does not include any Windows or the Frame shown, but is required to use Tubular HoopTech SAPR4, SAPR2RD, SAPR35, SAPR44, SAPR53, SAPR5RD, SAPRHSL, SAPRHSR Hoops
There are (9) different window sizes to choose from with the Slim Line 1 Clamping System. Each (3) piece window set comes with a Base Adapter window and (2) top clamping windows. One for thin fabrics and one for thicker stiffer material. All window sets quickly and easily install onto the chassis, no tools required.
Works with the Following Machines:
Brother
There are (9) different window sizes to choose from with the Slim Line 1 Clamping System. Each (3) piece window set comes with a Base Adapter window and (2) top clamping windows. One for thin fabrics and one for thicker stiffer material. All window sets quickly and easily install onto the chassis, no tools required.
Works with the Following Machines:
Brother
- PR600
- PR620
- PR650
- PR670
- PR1000
- PR1050
BabyLock
- EMP6
- BMP6
- ENT10
- BNT10
Hoop Tech is the perfect choice for embroidering smaller difficult to hoop items such as purses, back packs and small totes. Expand your product offerings and stay ahead of your competition! Open the world of embroidery to items that previously were impossible to sew on: leather portfolios, tote bags, heavy and thick items and more– the possibilities are endless.
Clamping System Features:
- Single lever opens, closes and locks the clamp.
- (8) interchangeable window sizes to choose from.
- Mounts directly to machine drive bar for positive attachment.
- All metal construction, powder coated aluminum & stainless steel.
- The clamp automatically adjusts to different fabric thickness.
- Clamping action does not leave “hoop burns”
- Clamp stays on the machine while loading and unloading.
The base unit, or Chassis, holds the two pieces (bottom and top) of the clamping Window in place with just the twist of a knob!
Use Clamps when you want Faster Positioning Without Obstacles! Clamp over heavy seams, velcro, zippers, and other elements that make it almost impossible to squeeze into a hoop. Holds products steady, and never leaves a hoop burn. Perfect for leather, lunch bags, fanny packs, canvas totes, garment bags, gym bags, and more.
The Hoop Tech SAPRB6 Small Chassic for Brother PR Series is for Brother PR and Baby Lock EMP Series Machines. Use Hoop Tech SAPRB6 Small Chassic for Brother PR Series when you want faster positioning without obstacles. This Hoop Tech SAPRB6 Small Chassic for Brother PR Series can clamp over heavy seams, velcro, zippers, and other elements that make it almost impossible to squeeze into a hoop. Also, the Hoop Tech SAPRB6 Small Chassic for Brother PR Series holds products steady, and never leaves a hoop burn. Versatile, the Hoop Tech SAPRB6 Small Chassic for Brother PR Series is perfect for leather, lunch bags, fanny packs, canvas totes, garment bags, gym bags, and more.
Base Unit does not include any Windows or Frames shown, but is required to use Tubular HoopTech SAPR4, SAPR2RD, SAPR35, SAPR44, SAPR53, SAPR5RD, SAPRHSL, SAPRHSR.
Non-US Warranty: 30 days parts and labor.
Specifications
EMS HoopTech SLIM LINE CLAMPING SYSTEM for BROTHER PR and Babylock Multi Needle MachinesSmall PR1 Clamping System:
HoopTech 599458 Brother SAPR5x3" Slimline 2 pc Window Clamp for PR & Babylock
 HoopTech 599458 Brother SAPR5x3" Slimline 3 pc Window Clamp PR & Babylock (chassis not included) |
Our Price: $128.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: 2 piece set comes with one clamping window and base adapter window. Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment. Chassis shown in photos sold separately. Click here to view the compatible chassis or view it under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
5" Wide x 3" Tall
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
HoopTech 599462 APR2RD 2" Round Slimline 3 Pc. Window Clamp for Brother PR6 PR10 and Babylock Multi Needle Embroidery Machines
 29368: HoopTech 599462 APR2RD 2" Round Slimline 2Pc Window Clamp for Brother PR6 PR10 |
Our Price: $128.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: 3 piece set comes with one (1) base adapter window and two (2) clamping windows. Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment. Chassis shown in photos sold separately. Click here to view the compatible chassis or view it under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
Use Clamps when you want Faster Positioning Without Obstacles! Clamp over heavy seams, velcro, zippers, and other elements that make it almost impossible to squeeze into a hoop. Holds products steady, and never leaves a hoop burn. Perfect for leather, lunch bags, fanny packs, canvas totes, garment bags, gym bags, and more.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
Use Clamps when you want Faster Positioning Without Obstacles! Clamp over heavy seams, velcro, zippers, and other elements that make it almost impossible to squeeze into a hoop. Holds products steady, and never leaves a hoop burn. Perfect for leather, lunch bags, fanny packs, canvas totes, garment bags, gym bags, and more.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
EMS HoopTech SLIM LINE CLAMPING SYSTEM for BROTHER PR and BabylockHoopTech 599565 Brother SAPR2.5x4" SlimLine 3 pc Window Clamp for PR6-1000 and Babylock
 HoopTech 599466 Brother SAPR2x4" SlimLine 3 pc Window Clamp PR Babylock (chassis sold separately) |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the same business day. Condition: New In Box |
Features
*Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment and Window Frame Holding Arms under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
Use Clamps when you want Faster Positioning Without Obstacles! Clamp over heavy seams, velcro, zippers, and other elements that make it almost impossible to squeeze into a hoop. Holds products steady, and never leaves a hoop burn. Perfect for leather, lunch bags, fanny packs, canvas totes, garment bags, gym bags, and more.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
Use Clamps when you want Faster Positioning Without Obstacles! Clamp over heavy seams, velcro, zippers, and other elements that make it almost impossible to squeeze into a hoop. Holds products steady, and never leaves a hoop burn. Perfect for leather, lunch bags, fanny packs, canvas totes, garment bags, gym bags, and more.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
EMS HoopTech SLIM LINE CLAMPING SYSTEM for BROTHER PR and BabylockHoopTech 599493 Brother SA599 PR2 Larger Chassis Base Unit, Rail Mounted Clamp, 11x5" and 8x5" Window Frames Set for PR6 PR10 Babylocks
 29371: HoopTech 599493 Brother PR Chassis Base Unit +11x5" & 8x5" Clamp Window Frames Sets |
Our Price: $699.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
"I had two trunk organizers to embroider and no way it was going to happen with the hoops I had.
Your hoop system was fantastic! Being able to just clamp it down in the frame was fantastic." Melba M. Meridian MS
Hoop Tech is the perfect choice for embroidering smaller difficult to hoop items such as purses, back packs and small totes. Expand your product offerings and stay ahead of your competition! Open the world of embroidery to items that previously were impossible to sew on: leather portfolios, tote bags, heavy and thick items and more– the possibilities are endless. Rail Mounted Clamping System. Designed to fit on Brother PR600 / 620 / 650 / 655, 670 1000's and Babylock models. Includes an 8×5 and 11X5 window
Clamping System Features:
Your hoop system was fantastic! Being able to just clamp it down in the frame was fantastic." Melba M. Meridian MS
Hoop Tech is the perfect choice for embroidering smaller difficult to hoop items such as purses, back packs and small totes. Expand your product offerings and stay ahead of your competition! Open the world of embroidery to items that previously were impossible to sew on: leather portfolios, tote bags, heavy and thick items and more– the possibilities are endless. Rail Mounted Clamping System. Designed to fit on Brother PR600 / 620 / 650 / 655, 670 1000's and Babylock models. Includes an 8×5 and 11X5 window
Clamping System Features:
- Single lever opens, closes and locks the clamp.
- (2) interchangeable window sizes to choose from.
- Mounts directly to machine drive bar for positive attachment.
- All metal construction, powder coated aluminum & stainless steel.
- The clamp automatically adjusts to different fabric thickness.
- Clamping action does not leave “hoop burns”
- Clamp stays on the machine while loading and unloading..
The base unit, or Chassis, holds the two pieces (bottom and top) of the clamping Window in place with just the twist of a knob!
Includes 11" x 5" Window and 8" x 5" Window Set
Use Clamps when you want Faster Positioning Without Obstacles! Clamp over heavy seams, velcro, zippers, and other elements that make it almost impossible to squeeze into a hoop. Holds products steady, and never leaves a hoop burn. Perfect for leather, lunch bags, fanny packs, canvas totes, garment bags, gym bags, and more.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
Hoop Tech PR2 Clamping System
In this video we show you how to adjust and install your PR 2 clamping system. This is the larger of our clamping systems that work on the brother PR and Babylock machines. This clamping system comes with an 11X5 and 8X5 window
Hoop Tech Slim Line Clamping System PDF for Brother PR and Babylock
Hoop Tech 599530 3x3.75" Pocket Clamp for Cap Drivers on MELCO/TAJIMA/TOYOTA/BRO1201/SWF/ZSK
 |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Required: Must order or have the Pocket Framing Gauge for use with this attachment.
Driver mounted Clamps for Embroidery on pocket fronts.
POCKET CLAMPS
The POCKET CLAMP series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech POCKET CLAMPS.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Available in three different sizes 2.5 x 3.75, 3.0 x 3.75 & 3.5 x 3.75.
POCKET CLAMPS although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
POCKET CLAMPS
The POCKET CLAMP series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech POCKET CLAMPS.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Available in three different sizes 2.5 x 3.75, 3.0 x 3.75 & 3.5 x 3.75.
POCKET CLAMPS although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Non-US Warranty: 30 days parts and labor.
Specifications
Driver mounted Clamps for Embroidery on pocket fronts.Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines
Hoop Tech 599530 Pocket Clamp Choose 2.5-3.5x3.75in for PRCF3 Cap Driver on Brother PRS1 PR600 PR620 PR650 PR655 PR670 Babylock 6 Needles
 64037: HoopTech 599530 Pocket Clamp Choose 2.5-3.5 x 3.75" for Cap Drivers on Brother PR6 |
Our Price: $149.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Required: Must also order or have the Pocket Framing Gauge for use with this attachment.
For use with Brother PRCF3 cap driver only.
Driver mounted Clamps for Embroidery on pocket fronts.
POCKET CLAMPS:
The POCKET CLAMP series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech POCKET CLAMPS.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Available in three different sizes 2.5 x 3.75, 3.0 x 3.75 & 3.5 x 3.75.
POCKET CLAMPS although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
For use with Brother PRCF3 cap driver only.
Driver mounted Clamps for Embroidery on pocket fronts.
POCKET CLAMPS:
The POCKET CLAMP series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech POCKET CLAMPS.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Available in three different sizes 2.5 x 3.75, 3.0 x 3.75 & 3.5 x 3.75.
POCKET CLAMPS although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
Non-US Warranty: 30 days parts and labor.
Specifications
The pocket clamp series are individual window clamps that were designed to hold the pocket fronts on finished dress shirtsDriver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Part Numbers for Pocket Clamps fitting Brother/Babylock PR6:
599903 - 2.5 x 3.75 for Melco/Tajima/Toyota/PR600/BROTHER/SWF/ZSK
599901 - 3.0 x 3.75 for Melco/Tajima/Toyota/PR600/BROTHER/SWF/ZSK
599916 - 3.5 x 3.75 for Melco/Tajima/Toyota/PR600/BROTHER/SWF/ZSK
HoopTech 599548 Brother SAPRHSR Slimline Hat Side Right 2pc Window Clamp PR Babylock
 |
Our Price: $97.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment and Window Frame Holding Arms under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
HoopTech 599551 Brother SAPRHSL Slimline Hat Side Left 2pc Window Clamp PR6, PR10 and Babylock Multi Needle Embroidery Machines
 |
Our Price: $129.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*for Brother PR1000, PR600 Embroidery Machines, Requires SAPRB6* Requires your existing or new purchase of Brother HoopTech SAPRB6 PR600 Chassis Attachment and Window Frame Holding Arms under Recommended Accessories below.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Brother PR & Babylock
Rail Mounted Clamping System
Designed to fit on Brother PR600 / 620 / 650 / 1000 and Babylock models.
Clamping System Features
Single lever opens, closes and locks the clamp.
(8) interchangeable window sizes to choose from.
Mounts directly to machine drive bar for positive attachment.
All metal construction, powder coated aluminum & stainless steel.
The clamp automatically adjusts to different fabric thickness.
Clamping action does not leave “hoop burns”
Clamp stays on the machine while loading and unloading.
No more hooping! Clamp it with HoopTech and get faster positioning without obstacles.
Perfect for those times when you just can’t hoop an item for fear of hoop burn, or fabric thickness, or many other reasons!
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Brother PR & Babylock
Rail Mounted Clamping System
Designed to fit on Brother PR600 / 620 / 650 / 1000 and Babylock models.
Clamping System Features
Single lever opens, closes and locks the clamp.
(8) interchangeable window sizes to choose from.
Mounts directly to machine drive bar for positive attachment.
All metal construction, powder coated aluminum & stainless steel.
The clamp automatically adjusts to different fabric thickness.
Clamping action does not leave “hoop burns”
Clamp stays on the machine while loading and unloading.
Non-US Warranty: 30 days parts and labor.
Specifications
HoopTech 599567 Small 2.75x1.5" Shoe Clamp Hoop Frame and Bracket for PR Multi Needle Embroidery Machines PR600 PR650 PR670 PR1000 PR1050, Babylock
 42391: HoopTech 599567 Sm 2.75x1.5" Shoe Clamp Hoop Frame, Bracket, Brother PR |
Our Price: $469.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The HOOP TECH Soccer Shoe Clamp is designed to allows embroidery on soccer shoe sides and tongues. Its exceptional grip strength will hold the shoe in place during embroidering. The clamp body is rail mounted , (it attaches directly the drive rail of the panagraph - same as a cap driver) to ensure maximum rigidity on the machine.
The window size is 2 3/4" wide by 1 1/2" deep. The window size is designed small enough to fit down into most shoe sides and still have an adequate sewing field for logos, flags, initials, names, numbers etc.
The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing.
Embroidery on finished shoes is definitely a challenge. But with the HOOP TECH Soccer Shoe Clamp you will be able to sew in places that you never thought possible.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
The window size is 2 3/4" wide by 1 1/2" deep. The window size is designed small enough to fit down into most shoe sides and still have an adequate sewing field for logos, flags, initials, names, numbers etc.
The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing.
Embroidery on finished shoes is definitely a challenge. But with the HOOP TECH Soccer Shoe Clamp you will be able to sew in places that you never thought possible.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
The Hoop Tech Shoe Clamp is a specialty clamp designed for sewing on the sides of shoes. Personalize soccer shoes, gym shoes, and hard-to-hold items. Built with high strength aluminum these are heavy duty clamps and fits all major embroidery machine brand.HoopTech 599717 Large 3.5x1.75" Shoe Clamp Hoop Frame Bracket Brother PR
 41060: HoopTech 599717 Large 3.5x1.75" Shoe Clamp Hoop Frame Bracket Brother PR |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The HOOP TECH Soccer Shoe Clamp is designed to allows embroidery on soccer shoe sides and tongues. Its exceptional grip strength will hold the shoe in place during embroidering. The clamp body is rail mounted , (it attaches directly the drive rail of the panagraph - same as a cap driver) to ensure maximum rigidity on the machine.
The window size is 2 3/4" wide by 1 1/2" deep. The window size is designed small enough to fit down into most shoe sides and still have an adequate sewing field for logos, flags, initials, names, numbers etc.
The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing.
Embroidery on finished shoes is definitely a challenge. But with the HOOP TECH Soccer Shoe Clamp you will be able to sew in places that you never thought possible.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
The window size is 2 3/4" wide by 1 1/2" deep. The window size is designed small enough to fit down into most shoe sides and still have an adequate sewing field for logos, flags, initials, names, numbers etc.
The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing.
Embroidery on finished shoes is definitely a challenge. But with the HOOP TECH Soccer Shoe Clamp you will be able to sew in places that you never thought possible.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
HoopTech 599725 Koozie Clamp Frame, Adapter Bracket, for Brother PR and Babylock
 41059: HoopTech 599725 Koozie Clamp Frame, Adapter Bracket, Brother PR Babylock |
Our Price: $499.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Koozie Clamp is a heavy duty screw activated clamp specially designed to hold neoprene koozie drink covers for embroidery. This clamp will hold the stretchy material securely while it is stretched over the sewing arm during sewing. The Koozie has a big 2-3/4” x 3” sewing window for a large design.
CLAMP WILL ADAPT TO FIT THE FOLLOWING TYPES OF SINGLE-HEAD EMBROIDERY MACHINES:
BABYLOCK BMP/ENT
BARUDAN
BROTHER
PR600/620/650/1000
MELCO
SWF
TAJIMA
TOYOTA
The HOOP TECH SOLO CUP Koozie Clamp is designed to allow embroidery on the popular Koozie. Its exceptional grip strength will hold the Koozie in place during embroidering. The clamp body is rail mounted, (it attaches directly the drive rail of the panagraph - same as a cap driver) to ensure maximum rigidity on the machine.
The window size is 2 3/4" wide X 3" deep. The window size is designed small enough to fit down into most Koozies and still have an adequate sewing field for logos, monograms, names, etc.
The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing.
• MOUNTS DIRECTLY TO MACHINE DRIVE BAR FOR POSITIVE ATTACHMENT.
• ALL METAL CONSTRUCTION, POWDER COATED ALUMINUM & STAINLESS STEEL.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
CLAMP WILL ADAPT TO FIT THE FOLLOWING TYPES OF SINGLE-HEAD EMBROIDERY MACHINES:
BABYLOCK BMP/ENT
BARUDAN
BROTHER
PR600/620/650/1000
MELCO
SWF
TAJIMA
TOYOTA
The HOOP TECH SOLO CUP Koozie Clamp is designed to allow embroidery on the popular Koozie. Its exceptional grip strength will hold the Koozie in place during embroidering. The clamp body is rail mounted, (it attaches directly the drive rail of the panagraph - same as a cap driver) to ensure maximum rigidity on the machine.
The window size is 2 3/4" wide X 3" deep. The window size is designed small enough to fit down into most Koozies and still have an adequate sewing field for logos, monograms, names, etc.
The upper and lower clamping frames have an aggressive non-slip surface to hold leather and nylon secure during sewing.
• MOUNTS DIRECTLY TO MACHINE DRIVE BAR FOR POSITIVE ATTACHMENT.
• ALL METAL CONSTRUCTION, POWDER COATED ALUMINUM & STAINLESS STEEL.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
Sewing on a Koozie is difficult undertaking due to the small size of the Koozie and the large size of the machine sewing arm. Machines with smaller sewing arms and/or stronger drive motors will be able to take advantage of more of the available sew field.The KOOZIE CLAMP is mounted directly to the machine drive bar (same as your cap driver), for a positive attachment. Machine specific adapters bolt to the clamp body and are used to attach and adjust the clamp to fit your embroidery machine. Hoop Tech makes adapter brackets for all major embroidery machine brands.
BARUDAN – BROTHER – BROTHER PR – HAPPY VOYAGER – HAPPY HCA – HAPPY HCD – TAJIMA – TAJIMA 2 HEAD – TOYOTA – SWF – SWF 902D – SWF COMPACT – MELCO EMT – MELCO AMAYA – MEISTERGRAM – PRODIGI – INBRO RSC & IB C- ZSK – RICOMA
HoopTech 599733 GEN2 Generation II Solution Dream Cap Hat Frame Hoop Only, for Brother Babylock PRS1-6 Needle , Requires T-bar Gauge and PRCH3 Driver
 HoopTech 599733 GEN2 Cap Hat Hoop Dream Frame-Only for Brother PR6, BL, Requires Tbar Gauge/Driver* |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: I have heard great things about the Brother Flat Brim Cap Driver, but the Hoop Tech Gen 2 Cap Frame and Mounting Bracket does not work on this driver. Hoop Tech 12/13/21
The Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before
Note: Not for Brother PR1000, PR1050X. Use for some floppy hats, the Gen2 could be used on a hat with a thinner, flexible, narrow brim, more height and less width of Sewing Area, approximately 6" Wide x 4" Height*
*Note: *Requires Purchase of EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame- Please Specify Machine.*Also requires the Brother Driver from the original PRCF3 Cap Equipment Box*.
For Brother PR600, PR620, PR650, PR650E, PR655E, Babylock EMP6, BMP6, Happy, Tajima, Toyota, SWF, Ricoma, ZSK
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in the recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Important Notes:
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
*The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
The Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before
Note: Not for Brother PR1000, PR1050X. Use for some floppy hats, the Gen2 could be used on a hat with a thinner, flexible, narrow brim, more height and less width of Sewing Area, approximately 6" Wide x 4" Height*
*Note: *Requires Purchase of EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame- Please Specify Machine.*Also requires the Brother Driver from the original PRCF3 Cap Equipment Box*.
For Brother PR600, PR620, PR650, PR650E, PR655E, Babylock EMP6, BMP6, Happy, Tajima, Toyota, SWF, Ricoma, ZSK
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in the recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Important Notes:
- *The Dream T-Bar Gauge clamp is required to use this Cap Frame
- *You must have an existing Cap Driver from the machine manufactuere to connect to your machines.
- There is a metal cap that covers the machine's hoop sensor which tells the machine a Cap Frame is attached. For each sew out press the layout icon for trial run to ensure the needle will not hit the hoop while sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
*The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
Non-US Warranty: 30 days parts and labor.
Specifications
HOW TO USE THE Hoop Tech GEN2 CAP FRAME on Your Brother PR or Babylock Machine Video:How to Hoop a Richardson/outdoor Cap Video:
How to hoop Bucket hats and Visors using the Gen 2 System:
Override Installation Clip on PR Machines
Hoop Tech Dream Frame Cap Frame part numbers for Brother PR Series compatible with models:
Brother PR600/600II/620/650/655 - 599733
Brother PR1000 Series - 599734
Baby Lock 6 Needle - 599733
Baby Lock 10 Needle - 599734
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new GEN 2 hat hoop will turn your (6) & (10) needle machine into a REAL cap sewing machine.
The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the GEN 2 comes with a specially designed "override bracket" that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed.
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration. Note: You need to already own the Brother hat jig and driver for this item to work.
HoopTech 599733 GEN2 Starter PacK Hat Hoop Dream Frame +599775 T Bar Cap Framing Gauge, Add Brother/Babylock PRS100-PR680 CAP DRIVER If you Don't Have
 41056: HoopTech 599733 GEN2 Cap Hat Hoop Dream Frame-Only for Brother PR6, BL, Requires Tbar Gauge/Driver* |
Our Price: $799.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
Note: I have heard great things about the Brother Flat Brim Cap Driver, but the Hoop Tech Gen 2 Cap Frame and Mounting Bracket does not work on this driver. Hoop Tech 12/13/21
The Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before.
Note: Not for Brother PR1000, PR1050X. Use for some floppy hats, the Gen2 could be used on a hat with a thinner, flexible, narrow brim, more height and less width of Sewing Area, approximately 6"Wide x 4" Height*
*Note: *Requires Purchase of EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame- Please Specify Machine.*Also requires the Brother Driver from the original PRCF3 Cap Equipment Box*.
For all Brother 6 needle PR600, PR620, PR650, PR650E, PR655E, PR670E, plus all Babylock 6 needle models EMP6, BMP6, Happy, Tajima, Toyota, SWF, Ricoma, ZSK
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in the recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Setting up the Gen2 on your Brother PR/Babylock machine
Important Notes:
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
*The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
The Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before.
Note: Not for Brother PR1000, PR1050X. Use for some floppy hats, the Gen2 could be used on a hat with a thinner, flexible, narrow brim, more height and less width of Sewing Area, approximately 6"Wide x 4" Height*
*Note: *Requires Purchase of EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame- Please Specify Machine.*Also requires the Brother Driver from the original PRCF3 Cap Equipment Box*.
For all Brother 6 needle PR600, PR620, PR650, PR650E, PR655E, PR670E, plus all Babylock 6 needle models EMP6, BMP6, Happy, Tajima, Toyota, SWF, Ricoma, ZSK
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in the recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Setting up the Gen2 on your Brother PR/Babylock machine
Important Notes:
- *The Dream T-Bar Gauge clamp is required to use this Cap Frame
- *You must have an existing Cap Driver from the machine manufactuere to connect to your machines.
- There is a metal cap that covers the machine's hoop sensor which tells the machine a Cap Frame is attached. For each sew out press the layout icon for trial run to ensure the needle will not hit the hoop while sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
*The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
Non-US Warranty: 30 days parts and labor.
Specifications
HOW TO USE THE Hoop Tech GEN2 CAP FRAME on Your Brother PR Machine Video:In this Hooptech How To we show you how to use the Gen2 Capframe. Formerly known as the "Dream frame," this revolutionary frame helps embroidery businessesHow to Hoop a Richardson/outdoor Cap Video:
How to hoop Bucket hats and Visors using the Gen 2 System:
Override Installation Clip on PR Machines
Hoop Tech Dream Frame Cap Frame part numbers for Brother PR Series compatible with models:
Brother PR600/600II/620/650/655 - 599733
Brother PR1000 Series - 599734
Baby Lock 6 Needle - 599733
Baby Lock 10 Needle - 599734
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new GEN 2 hat hoop will turn your (6) & (10) needle machine into a REAL cap sewing machine.
The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the GEN 2 comes with a specially designed "override bracket" that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed.
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration. Note: You need to already own the Brother hat jig and driver for this item to work.
HoopTech 599734 GEN2 Starter PKG Solution Hat Hoop Dream Frame +599775 Tbar Gauge. Add Required Brother/Babylock Cap Driver for PR1000 PR1050X PR1055X
 96031: HoopTech 599734 GEN2 Solution Hat Hoop Dream Frame +599775 Tbar Gauge. Add Required Brother Cap Driver for PR1000 PR1050x Babylock If You Don't Have |
Our Price: $799.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: I have heard great things about the Brother Flat Brim Cap Driver, but the Hoop Tech Gen 2 Cap Frame and Mounting Bracket does not work on this driver. Hoop Tech 12/13/21
The Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before.
"The hat hoops are GREAT! So much better to use than the ones that come with the machine, very fast and easy to hoop and put on the machine, I should have bought them sooner" Joann P, Holliday RL.
Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA, Also requires an optional Brother Driver from the original PRPCF1 Cap Equipment Box*
*Also Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA, Larger Height and Less Width Sewing Area than PR Cap Equipment, for Brother PR655, PR1000, PR1000E, and Babylock ENT10 BNT10 10 Needle Embroidery Machines.
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in Recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Setting up the Gen2 on your Brother PR/Babylock machine
Important Notes:
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
The Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before.
"The hat hoops are GREAT! So much better to use than the ones that come with the machine, very fast and easy to hoop and put on the machine, I should have bought them sooner" Joann P, Holliday RL.
Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA, Also requires an optional Brother Driver from the original PRPCF1 Cap Equipment Box*
*Also Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA, Larger Height and Less Width Sewing Area than PR Cap Equipment, for Brother PR655, PR1000, PR1000E, and Babylock ENT10 BNT10 10 Needle Embroidery Machines.
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in Recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Setting up the Gen2 on your Brother PR/Babylock machine
Important Notes:
- The Dream T-Bar Gauge clamp is required to use this Cap Frame.
- Can be used with existing Brother/Babylock Driver. but it is recommended that you use the Dream T-Bar Gauge for optimum results.
- There is a metal cap that covers the machine's hoop sensor which tells the machine a Cap Frame is attached. For each sew out press the layout icon for trial run to ensure the needle will not hit the hoop while sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
Non-US Warranty: 30 days parts and labor.
Specifications
Stitch Area
Maximum height: Approximately up to 3.5 to 4" and closer to the brimMaximum width Approximately 5.5"- 6"
Note:Manufacturer does not recommend embroidering to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A realistic measurement of the stitch area would be somewhere between 3" to 3.5" tall and 5" to 5.5" wide without losing registration.
As a reminder we do not guaranty a sew field of the Gen 2 because the sew field depends on the machine type and the style of hat. Hoop Tech.
HOW TO USE THE Hoop Tech GEN2 CAP FRAME on Your Brother PR Machine Video:In this Hooptech How To we show you how to use the Gen2 Capframe. Formerly known as the "Dream frame," this revolutionary frame helps embroidery businesses small
How to Hoop a Richardson/outdoor Cap Video:
How to hoop Bucket hats and Visors using the Gen 2 System:
Override Installation Clip on PR Machines
Hoop Tech Dream Frame Cap Frame part numbers for Brother PR Series compatible with models:
Brother PR600/600II/620/650/655 - 599733
Brother PR1000 Series - 599734
Baby Lock 6 Needle - 599733
Baby Lock 10 Needle - 599734
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new GEN 2 hat hoop will turn your (6) & (10) needle machine into a REAL cap sewing machine.
The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the GEN 2 comes with a specially designed "override bracket" that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed.
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration. Note: You need to already own the Brother hat jig and driver for this item to work.
HoopTech 599775 T-Bar Framing Gauge 270° for Dream Cap Hat Hoop on Brother PR, Babylock Other Multi Needle Embroidery Machines*
 41058: HoopTech 599775 T-Bar Framing Gauge for 270° Dream Cap Hat Hoop Brother PR BL Other |
Our Price: $449.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
"The hat hoops are GREAT! So much better to use than the ones that come with the machine, very fast and easy to hoop and put on the machine, I should have bought them sooner" Joann P, Holiday FL.
The Dream T-Bar Gauge is basically the same as the 270 T-Bar Gauge with a few changes.
The patented HOOP TECH Framing Gage features the exclusive T–Bar Tensioning Arm.
This tensioning arm gives even the inexperienced cap framer the ability to frame a cap tight…even low profile un-constructed caps.
It’s the easiest way to stretch a cap tight!
Once you try it, you’ll be amazed at how easy it can be to frame a cap!
The Dream Frame is not included in this package. To add the Dream Frame please see the Recommended Accessories Section Below
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
The Dream T-Bar Gauge is basically the same as the 270 T-Bar Gauge with a few changes.
The patented HOOP TECH Framing Gage features the exclusive T–Bar Tensioning Arm.
This tensioning arm gives even the inexperienced cap framer the ability to frame a cap tight…even low profile un-constructed caps.
It’s the easiest way to stretch a cap tight!
Once you try it, you’ll be amazed at how easy it can be to frame a cap!
The Dream Frame is not included in this package. To add the Dream Frame please see the Recommended Accessories Section Below
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
- *You must have an existing Cap Driver from the machine manufacturer to connect to your machines
Non-US Warranty: 30 days parts and labor.
Specifications
These are videos using a combination of Hoop Tech Gen2 Cap Frame and the Framing Guage on this page. You will still need to buy the Gen 2 Cap Frame and a cap driver for your multi needle embroidery machine.HOW TO USE THE Hoop Tech GEN2 CAP FRAME Video:
How to Hoop a Richardson/outdoor Cap Video:
How to hoop Bucket hats and Visors using the Gen 2 System:
HoopTech 5.5”x2.5” Small Compact Back of Hat Clamp Frame, Rear Cap Embroidery, Brother PRS1 PR6 PR10 Babylock, Tajima Multi Needle Embroidery Machines
 44693: Hoop Tech 5997__ Back of Hat Clamp Frame, Rear Cap Embroidery, Brother PRS1 PR6 PR10, Babylock |
Our Price: $369.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
To embroider on Santa Hats, Stockings and Shirt Cuffs I would recommend our Small Compact Back of Cap. Hoop Tech.
Use with Hoop Tech Pocket Framing Gauge plus the Cap Driver for your machine.
See Justin and Joe from Hoop Tech talk about cap frames at the Houston Virtual Quilt Festival!
Note this video shows the Tajima hoop which includes the Red toggle switch, the Brother compatible hoops do not have the red toggle switch.
Hoop Tech's back of cap clamp is the easiest way to embroider the back of hats when your cap driver is already installed on the machine. It features a simple clamping action, which lets you position the cap easily.
Features:
Use with Hoop Tech Pocket Framing Gauge plus the Cap Driver for your machine.
See Justin and Joe from Hoop Tech talk about cap frames at the Houston Virtual Quilt Festival!
Note this video shows the Tajima hoop which includes the Red toggle switch, the Brother compatible hoops do not have the red toggle switch.
Hoop Tech's back of cap clamp is the easiest way to embroider the back of hats when your cap driver is already installed on the machine. It features a simple clamping action, which lets you position the cap easily.
Features:
- Easy Installation
- Spring clips keep your stabilizer in place
- Use one level for locking and clamping in one step
- Large embroidery area
- Centering points for easy positioning
- Inside Dimensions: A little over 5 inches left to right and 2 & 1/2 inches tall
Driver Sold Separately
Will not work with every driver but will on the majority of Tajima, Brother, Melco and Toyota machines. Please specify your machine brand and model upon checkout.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout go make sure the needle or foot will not hit the frame when it is sewing.
Step-by-step instructions on lowering and adjusting the PR Cap Driver
Non-US Warranty: 30 days parts and labor.
Specifications
Compact Cap Back Clamp for Cap DriversThe easy to use patent pending single lever cam locking lever quickly clamps the cap and backing in place and you’re ready to sew. The Compact Cap Back Clamp fits most existing Tajima style drivers. Compact CapBack & Sides – the easiest and fastest way to frame up a cap
Features Include
(2) Backing holding clips to secure packing while framing up the cap.
Mounts to machine using existing cap driver.
Single lever opens, closes and locks the clamp.
All stainless steel metal construction for many years of service.
Fully adjustable clamp adjusts to different fabric thickness.
Clamping action does not leave “hoop burns”
Use your existing Tajima framing gage OR existing Barudan framing gage with HTP adapter piece OR the HTP Framing Gage with the patented T-bar stretcher (all machine types).
Even “Flex Fit” Made Easy
The Compact Clamp for Cap Backs makes short work of the challenging Flex Fit caps. The elastic fabric and sweat band are easily clamped and adjusted for a smith, tight hold. Making embroidery on the back of caps quick and easy.
The COMPACT CAP BACK CLAMP Fits
TAJIMA
RICOMA
MELCO
TOYOTA
BROTHER
PR-600
BABYLOCK
PRODIGI
SWF
GENERATIONS
ZSK
HIGHLAND
INBRO
MEISTERGRAM
HIGHLAND
and now available for : PR-1000 – HAPPY – BARUDAN
Hoop Tech 599844 Framing Station Table Stand RTA*, Bar for Holding T-Bar or Gauge and Cap Hoops, Adjustable Height, Special Order Limited Supply
 63108: Hoop Tech 599844 Framing Station Table, Gauge Bar for Cap Hoops RTA* Adjustable Height, Special Order |
Our Price: $439.99 Prices are subject to change, and only current prices will be honored. Availability: Limited Stock Condition: New In Box |
Features
Ships Unassembled
The Hooptech Cap Framing Stand is a stand alone work station designed specifically for framing caps. The Framing Gage mounting bar easily adjusts to the proper working height for all sizes of operators. Working at the right height helps to ensure consistent framing and reduces sore muscles and operator fatigue.
The Hooptech Cap Framing Stand is a stand alone work station designed specifically for framing caps. The Framing Gage mounting bar easily adjusts to the proper working height for all sizes of operators. Working at the right height helps to ensure consistent framing and reduces sore muscles and operator fatigue.
Non-US Warranty: 30 days parts and labor.
Specifications
Adjustable working height6.7 sq/ft of shelf space
Heavy duty powder coated steel construction
Leveling feet
And it takes up only 4 sq/ft of floor space
Hoop Tech 599869 SlimLine Hoop Chassis +4 Window Clamping Frames Set PINK: 7x6" 4.5x4.5" 3.5x5.5" 2x2" Brother PRS100 Persona Babylock BNAL, MB4 MB7
 66179: Hoop Tech 599869 SlimLine Chassis +4 Window Frames for Brother PRS100 |
Our Price: $659.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The Slim Line “Persona” Clamping System is a redesigned version of the very popular Slim Line -1 with a compact chassis and new window shape. The Persona package includes, a new chassis with adapter and (4) window sizes. 7 x 6, 4.5 x 4.5, 3.5 x 5.5 & 2 x 2. Rail Mounted Clamping System.
Hoop Tech 599869 SlimLine Hoop Chassis is NOT available for ordering separately from this set.
The Slim Line Persona is the perfect choice for embroidering smaller difficult to hoop items such as purses, back packs and small totes.
Expand your product offerings and stay ahead of your competition! Open the world of embroidery to items that were previously impossible to sew on: leather portfolios, tote bags, heavy and thick items and more– the possibilities are endless.
Watch Justin from Hoop Tech talk about this set at the Houston Virtual Quilt Festival below!
HoopTech Clamping and Windows System Option Videos
Hoop Tech 599869 SlimLine Hoop Chassis is NOT available for ordering separately from this set.
The Slim Line Persona is the perfect choice for embroidering smaller difficult to hoop items such as purses, back packs and small totes.
Expand your product offerings and stay ahead of your competition! Open the world of embroidery to items that were previously impossible to sew on: leather portfolios, tote bags, heavy and thick items and more– the possibilities are endless.
Watch Justin from Hoop Tech talk about this set at the Houston Virtual Quilt Festival below!
Non-US Warranty: 30 days parts and labor.
Specifications
The Slimline “Persona” Features . . .- (4) interchangeable window sizes to choose from.
- Mounts directly to machine drive bar for positive attachment.
- Single lever opens, closes and locks the clamp.
- All metal construction, powder coated aluminum & stainless steel.
- Changing window sized requires no tools and takes only seconds.
- Mounting adapter centers window left to right.
- The clamp automatically adjusts to different fabric thickness.
Hoop Tech 599919 3.0x3.75in Pocket Clamp for Cap Drivers on Brother PR1000, PR1050X, Babylock 10 Needle Embroidery Machines (Requires driver)
 96184: HoopTech 599919 3.0x3.75" Pocket Clamp for Cap Drivers on Brother PR1000, PR1050X |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Required: Must order or have the Pocket Framing Gauge for use with this attachment.
Newer 599919 has an enhanced twist handle for easier tightening. The old model 599812 had a black knob for tightening.
Driver mounted Clamps for Embroidery on pocket fronts.
POCKET CLAMPS
The POCKET CLAMP series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech POCKET CLAMPS.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Available in three different sizes 2.5 x 3.75, 3.0 x 3.75.
POCKET CLAMPS although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
Newer 599919 has an enhanced twist handle for easier tightening. The old model 599812 had a black knob for tightening.
Driver mounted Clamps for Embroidery on pocket fronts.
POCKET CLAMPS
The POCKET CLAMP series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts. Sewing on pocket fronts has always been a challenge due to the limited amount of space that a dress shirt pocket has. But with the smaller sewing arms offered by some embroidery machine manufacturers, like the Melco Amaya, sewing on pocket fronts has become possible with the use of the Hoop Tech POCKET CLAMPS.
The Pocket Clamps are made with a fixed lower window and a moveable top window that is actuated and locked with a hand tightened knob. Made entirely of stainless steel the clamps are built to last. The Clamps attach to and are run on your machines cap driver to help maximize the sewing field.
Available in three different sizes 2.5 x 3.75, 3.0 x 3.75.
POCKET CLAMPS although designed for the fronts of dress shirt pockets, are not limited to just that. Other uses include Socks, gloves, beanies, monogramming shirt cuffs, knit baby hats, collars, slippers and other applications that have limited space for an inside hoop.
Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
Many Uses
This versatile clamp has many other uses! Other uses include socks, gloves, beanies, shirt cuff monograms, knit baby hats, collars, slippers, and other items that have limited space for an inside hoop.
Non-US Warranty: 30 days parts and labor.
Specifications
The pocket clamp series are individual window clamps that were designed to hold the pocket fronts on finished dress shirts.Driver mounted Clamps for Embroidery on pocket fronts.
Sewing on pockets can be challenging due to lack of space but with smaller sewing arms offered on some embroidery machines, like the melco amaya, sewing on pocket fronts has become possible!
The pocket clamps have a hand tightened knob on the top that open and close the top window. These stainless steel clamps are built to last. They slide right onto your cap driver to help maximize the sewing field.
Note: not all sewing arms are created equal, so not all sewing arms will fit in all pockets and still have room to sew.
We do not currently have a pocket clamp that is compatible with Barudan machines.
HoopTech PR-SQ Square Hoop Frames: 3.5" 4.5" 5.5" 6.5" or 7.5" for Brother PR600-655 PR670, PR1000 PR1050X, Babylock Multi Needle Embroidery Machines
 42392: HoopTech Brother PR-SQ Square Hoop Frames: 3.5" 4.5" 5.5" 6.5" or 7.5" |
Our Price: $59.95 Prices are subject to change, and only current prices will be honored. Availability: ON BACKORDER Condition: New In Box |
Features
The HOOP TECH "Square Solution" hoops offers two advantages over round hoops (1) a larger sewing field verses a round hoop of the same size, because of the additional area in the corners, and (2) the ability to see the alignment of the garment with the straight sides of the hoop.
HOOP TECH hoops feature:
- Large easy to grip adjusting screw.
- Double height frame
- Rounded corners on the hoop & frame to reduce "hoop burn"
This product is made to fit the Brother PR600/620/650 6 Needle Embroidery Machines.
HOOP TECH hoops are available for all industrial embroidery machines by simply attaching arm adapters designed to fit your machine. Please contact us if you are interested in purchasing EMS Hoop Tech Hoops for other machines.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
HOOP TECH hoops feature:
- Large easy to grip adjusting screw.
- Double height frame
- Rounded corners on the hoop & frame to reduce "hoop burn"
This product is made to fit the Brother PR600/620/650 6 Needle Embroidery Machines.
HOOP TECH hoops are available for all industrial embroidery machines by simply attaching arm adapters designed to fit your machine. Please contact us if you are interested in purchasing EMS Hoop Tech Hoops for other machines.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
HoopTech EMS599797 Side of Hat Cap Clamp Rail Mounted For Commercial Embroidery Machines
 82997: HoopTech EMS599797 Side of Hat Cap Clamp Rail Mounted For Commercial Embroidery Machines |
Our Price: $469.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
2 and 3/4 inches wide by 2 1/2 inches is the size of the window. Like the slimline, we can adapt to most commercial machines including Melco, Happy, Barudan, Tajima, Toyota, Brother, Highland, Ricoma, other, etc.
The Side Clamp for Hats was designed to hold the left or right side panels on a hat and has a single cam lever that open/closes locking the clamp. The Cap Side Clamp is mounted directly to the machine driver bar (same as your cap driver). Please order the machine clamp needed with the drop down menu to the right.
The Side Clamp for Hats was designed to hold the left or right side panels on a hat and has a single cam lever that open/closes locking the clamp. The Cap Side Clamp is mounted directly to the machine driver bar (same as your cap driver). Please order the machine clamp needed with the drop down menu to the right.
Non-US Warranty: 30 days parts and labor.
Specifications
Heavy Duty Rail Mounted Clamping Window for sewing the left & right side panels on a cap without a driver. The CAP SIDE CLAMP is mounted directly to the machine drive bar (same as your cap driver), for a positive attachment. Machine specific adapters bolt to the clamp body and are used to attach and adjust the clamp to fit your embroidery machine. Hoop Tech makes adapter brackets for all major embroidery machine brands.Description
Sewing Left & Right Side Panels Without a Driver
Flat Clamp was designed to hold the left or right side panels on a finished cap. The specially formed top clamping window allows clearance for the bill and the stainless spring steel sweat band retainer is out of the way so that you can sew right along the bottom edge of the cap. The single cam lever, opens – closes and locks the clamp.
Secret to Perfect Alignment
The secret to perfect alignment on a side panel is to use a pressure sensitive Avery type label as a place holder, to locate and orient the design and then frame the cap in the clamp
HoopTech GEN2 Solution Cap Hat Hoop Dream Frame, HoopTech 599734 for Brother or Babylock 10 Needle PR1000 PR1050x, Requires Tbar Gauge and Driver*
 HoopTech 599734 GEN2 Solution Cap Hat Hoop Dream Frame Brother PR1000 PR1050x, Requires Tbar Gauge and Driver* |
Our Price: $399.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
Note: I have heard great things about the Brother Flat Brim Cap Driver, but the Hoop Tech Gen 2 Cap Frame and Mounting Bracket does not work on this driver. Hoop Tech 12/13/21
The Gen 2 from Hoop Tech is he Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before.
"The hat hoops are GREAT! So much better to use than the ones that come with the machine, very fast and easy to hoop and put on the machine, I should have bought them sooner" Joann P, Holliday FL.
Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA,
Also requires an optional Brother Driver from the original PRPCF1 Cap Equipment Box*
or requires the Brother Driver from your original PRPCF1 Cap Equipment Box*
*Also Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA, Larger Height and Less Width Sewing Area than PR Cap Equipment, for Brother PR655, PR1000, PR1000E, and Babylock ENT10 BNT10 10 Needle Embroidery Machines.
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in Recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Important Notes:
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
The Gen 2 from Hoop Tech is he Gen 2 from Hoop Tech is the next generation HTProfessional-style cap hat frame which is designed for sewing closer to the bill than ever before.
"The hat hoops are GREAT! So much better to use than the ones that come with the machine, very fast and easy to hoop and put on the machine, I should have bought them sooner" Joann P, Holliday FL.
Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA,
Also requires an optional Brother Driver from the original PRPCF1 Cap Equipment Box*
or requires the Brother Driver from your original PRPCF1 Cap Equipment Box*
*Also Requires EMS Hoop Tech Dream T-Bar Gauge Clamp for the Dream Cap Frame Made in USA, Larger Height and Less Width Sewing Area than PR Cap Equipment, for Brother PR655, PR1000, PR1000E, and Babylock ENT10 BNT10 10 Needle Embroidery Machines.
Note: The hoop sensor override bracket is not sold separately. It comes with any Hoop Tech Gen2 Dream Frame (599733 & 599734) that is sold for the Brother PR & BabyLock machines.The Override Bracket is stapled to the Gen 2 in a set of instructions. Hoop Tech
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
New “DREAM FRAME” features include:
• Backing clips to hold your stabilizer in place during framing.
• Internal retaining fingers for proper bill alignment.
• A spring steel bill retainer that sets and holds the bill angle.
• View ports to use as alignment guides during framing.
• Lighter frame design (20% less weight) than the original.
• Extended saddle for easier installation on driver.
• Open design Top Clamp.
• Large sewing field
The stitch quality of the Dream Frame is even better than the original EMS style cap frame and it’s easier to frame using the redesigned T-Bar Framing Gage Seen in Recommended accessories below:
DREAM FRAME demonstration by Hoop Tech Products:
Important Notes:
- The Dream T-Bar Gauge clamp is required to use this Cap Frame.
- Can be used with existing Brother/Babylock Driver. but it is recommended that you use the Dream T-Bar Gauge for optimum results.
- There is a metal cap that covers the machine's hoop sensor which tells the machine a Cap Frame is attached. For each sew out press the layout icon for trial run to ensure the needle will not hit the hoop while sewing.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Click To Download PR Drive Modification Instructions
ATTENTION BROTHER PR & BABY LOCK OWNERS
The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration.
Non-US Warranty: 30 days parts and labor.
Specifications
Stitch Area
Maximum height: Approximately up to 3.5 to 4" and closer to the brimMaximum width Approximately 5.5"- 6"
Note:Manufacturer does not recommend embroidering to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A realistic measurement of the stitch area would be somewhere between 3" to 3.5" tall and 5" to 5.5" wide without losing registration.
HOW TO USE THE Hoop Tech GEN2 CAP FRAME on Your Brother PR or Babylock Machine Video:
How to Hoop a Richardson/outdoor Cap Video:
How to hoop Bucket hats and Visors using the Gen 2 System:
Override Installation Clip on PR Machines
Hoop Tech Dream Frame Cap Frame part numbers for Brother PR Series compatible with models:
Brother PR600/600II/620/650/655 - 599733
Brother PR1000 Series - 599734
Baby Lock 6 Needle - 599733
Baby Lock 10 Needle - 599734
ATTENTION BROTHER PR & BABY LOCK OWNERS:
The new GEN 2 hat hoop will turn your (6) & (10) needle machine into a REAL cap sewing machine.
The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.
For PR & Baby Lock owners, the GEN 2 comes with a specially designed "override bracket" that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and also increases the stitching speed.
The maximum height you can stitch is approximately up to 4" and 5.5"- 6" left to right and as close to 1/2"-5/8" from the bill. However, we do not recommend trying to embroider to the maximum sewing areas depending on the capabilities of your machine. Sewing too close to the top of the cap or too close to the bill could compromise the quality of your stitch. A more realistic measurement would be somewhere between 2" to 2.5" high and 5" to 5.5" across without losing registration. Note: You need to already own the Brother hat jig and driver for this item to work.
HoopTech PR12X14" Split Design Hoop for Brother PR6 Needle & Babylock
 |
Our Price: $109.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The HOOP TECH "Square Solution" hoops offers two advantages over round hoops (1) a larger sewing field verses a round hoop of the same size, because of the additional area in the corners, and (2) the ability to see the alignment of the garment with the straight sides of the hoop.
HOOP TECH hoops feature:
- Large easy to grip adjusting screw.
- Double height frame
- Rounded corners on the hoop & frame to reduce "hoop burn"
This product is made to fit the Brother PR600/620/650 6 Needle Embroidery Machines.
HOOP TECH hoops are available for all industrial embroidery machines by simply attaching arm adapters designed to fit your machine. Please contact us if you are interested in purchasing EMS Hoop Tech Hoops for other machines.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
HOOP TECH hoops feature:
- Large easy to grip adjusting screw.
- Double height frame
- Rounded corners on the hoop & frame to reduce "hoop burn"
This product is made to fit the Brother PR600/620/650 6 Needle Embroidery Machines.
HOOP TECH hoops are available for all industrial embroidery machines by simply attaching arm adapters designed to fit your machine. Please contact us if you are interested in purchasing EMS Hoop Tech Hoops for other machines.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
HoopTech PR6X11.5" Split Design Square Hoop for PR6 Needle and Babylock
 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
The HOOP TECH "Square Solution" hoops offers two advantages over round hoops (1) a larger sewing field verses a round hoop of the same size, because of the additional area in the corners, and (2) the ability to see the alignment of the garment with the straight sides of the hoop.
HOOP TECH hoops feature:
- Large easy to grip adjusting screw.
- Double height frame
- Rounded corners on the hoop & frame to reduce "hoop burn"
This product is made to fit the Brother PR600/620/650 6 Needle Embroidery Machines.
HOOP TECH hoops are available for all industrial embroidery machines by simply attaching arm adapters designed to fit your machine. Please contact us if you are interested in purchasing EMS Hoop Tech Hoops for other machines.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
HOOP TECH hoops feature:
- Large easy to grip adjusting screw.
- Double height frame
- Rounded corners on the hoop & frame to reduce "hoop burn"
This product is made to fit the Brother PR600/620/650 6 Needle Embroidery Machines.
HOOP TECH hoops are available for all industrial embroidery machines by simply attaching arm adapters designed to fit your machine. Please contact us if you are interested in purchasing EMS Hoop Tech Hoops for other machines.
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Hoop tech 5.5”x2.875 Large Back of Cap Hoop for Brother Babylock PRS100, PR600, PR620, PR650, PR655, PR670, Tajima, SWF, Melco, ZSK, Barudan, Etc.
 96033: Hooptech 599870 Large Back of Cap Hoop for Brother Babylock PR600, Ricoma, Tajima, Melco |
Our Price: $349.95 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
To embroider on Santa Hats, Stockings and Shirt Cuffs I would recommend our Small Compact Back of Cap, not this large one. Hoop Tech.
Large back of hat clamp. This Easy to use back of hat clamp attaches to your cap frame driver and has the following inside dimensions: 5.5” x 2.875”
It will work with your existing cap hooping gauge and your machines driver. The optional small version of this clamp has 5.5” x 2.5” dimensions.
See Justin from Hoop Tech talk about cap frames at the Houston Virtual Quilt Festival!
Large back of hat clamp. This Easy to use back of hat clamp attaches to your cap frame driver and has the following inside dimensions: 5.5” x 2.875”
It will work with your existing cap hooping gauge and your machines driver. The optional small version of this clamp has 5.5” x 2.5” dimensions.
See Justin from Hoop Tech talk about cap frames at the Houston Virtual Quilt Festival!
Non-US Warranty: 30 days parts and labor.
Specifications
Features Include(2) Backing holding clips to secure packing while framing up the cap.
Mounts to machine using existing cap driver.
Single lever opens, closes and locks the clamp.
All stainless steel metal construction for many years of service.
Fully adjustable clamp adjusts to different fabric thickness.
Clamping action does not leave “hoop burns”
Use your existing Tajima framing gage OR existing Barudan framing gage with HTP adapter piece OR the HTP Framing Gage with the patented T-bar stretcher (all machine types).
Even “Flex Fit” Made Easy
The Clamp for Cap Backs makes short work of the challenging Flex Fit caps. The elastic fabric and sweat band are easily clamped and adjusted for a smith, tight hold. Making embroidery on the back of caps quick and easy.
Mighty Hoop Brother PR Kit 2 Includes HoopMaster Starter PRKit1 +6.25x8.25 +8x13 +Adjust Fixture,Station,Free Style Base,5.5"Fixture,5.5"Frame,Tsquare
 64725: Mighty Hoop Brother PR Kit 2 (PRKit1+6x25x8.25, 8x13" +Adjust Fixture) |
Our Price: $1,199.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 1-2 weeks. Condition: New In Box |
Features
PR-Kit 2 Includes everything in the PR-Kit 1 (except 4 fixtures for the plastic hoops) plus the 6.25x8.25", 8x13" and Adjustable fixture. This means that the PR-Kit 1 does not include the 4 fixtures for the plastic hoop, but the PR-Kit 2 does. it also does not include the Brother 100x100 Pocket Alignment Guide
Mighty Hoop Hoopmaster Starter Kit 2 for Brother PR Series and Babylock 6 or 10 needle machines.
Please select how many needles your machine has when ordering*
Included in this kit is:
- Hoopmaster Station
- Hoopmaster Freestyle Base
- 5.5" Hoopmaster Fixture and Freestyle Arm
- 5.5" Mighty Hoop
- T-Square
- 6.25" x 8.25" Mighty Hoop
- 8" x 13" Mighty Hoop
- Adjustable Fixture
Note: **WARNING: Mighty Hoops contain very strong magnets. If you have any type of medical device that can be affected by magnets, please consult your physician before ordering. By ordering you agree that you have read and understand this warning.**
The Mighty Hoop is a new magnetic hoop that makes hooping very easy. There is no need to adjust the outer ring as the hoop holds the garment with magnetic force and automatically adjusts for different thicknesses. It also reduces the stress on your wrists and hands because it wants to pull itself together. Even for thick garments, there is very little pressure needed to apply the hoop. Hoop burn is greatly reduced because of the way the hoop holds the fabric. Unlike clamps, Mighty Hoops are designed to work with the HoopMaster for easy accurate hooping.
**WARNING: Mighty Hoops contain very strong magnets. If you have any type of medical device that can be affected by magnets, please consult your physician before ordering. By ordering you agree that you have read and understand this warning.**
Mighty Hoop Hoopmaster Starter Kit 2 for Brother PR Series and Babylock 6 or 10 needle machines.
Please select how many needles your machine has when ordering*
Included in this kit is:
- Hoopmaster Station
- Hoopmaster Freestyle Base
- 5.5" Hoopmaster Fixture and Freestyle Arm
- 5.5" Mighty Hoop
- T-Square
- 6.25" x 8.25" Mighty Hoop
- 8" x 13" Mighty Hoop
- Adjustable Fixture
Note: **WARNING: Mighty Hoops contain very strong magnets. If you have any type of medical device that can be affected by magnets, please consult your physician before ordering. By ordering you agree that you have read and understand this warning.**
The Mighty Hoop is a new magnetic hoop that makes hooping very easy. There is no need to adjust the outer ring as the hoop holds the garment with magnetic force and automatically adjusts for different thicknesses. It also reduces the stress on your wrists and hands because it wants to pull itself together. Even for thick garments, there is very little pressure needed to apply the hoop. Hoop burn is greatly reduced because of the way the hoop holds the fabric. Unlike clamps, Mighty Hoops are designed to work with the HoopMaster for easy accurate hooping.
**WARNING: Mighty Hoops contain very strong magnets. If you have any type of medical device that can be affected by magnets, please consult your physician before ordering. By ordering you agree that you have read and understand this warning.**
Extended US Warranty: 1 year replacement on defective or missing parts.
Non-US Warranty: 30 days parts and labor.
Specifications
Actual Sewing Area of Hoops:- The actual sewing area of a Mighty Hoop is usually about 3/4" to 1" less than the size listed for the hoop. The sizes listed are the approximate inside dimensions of the hoop.
- The 8x13" is a little different, it will have a sewing area of about 7.25" deep x 11.5" wide on a 6 needle machine. The10 needle machine will be able to sew a little wider.
- Your machine will not recognize the size of the Mighty Hoops, so you should always do a trace of your design to make sure it will fit.
8x13" Options:
Here is a summary of the different versions of the 8x13" hoop. These options are explained in a video at www.mightyhoop.com/8x13.html
- We have 2 different versions of this hoop because they each can hoop certain types of garments better. The main difference is the way that they are held in the machine. The Tubular Version is the most common way to order
this size, it has the machine adaptor brackets on the top hoop, just like the standard hoops that come with your machine. The Flat version has the machine adaptor brackets on the bottom hoop.
- The Tubular version is best for T-Shirts, Sweatshirts and other items that are "tubular" when loading them in the machine. By this we mean that material has to go around and hang under the needle plate when sewing.
- The Flat version is best for the backs of thick jackets and blankets. The brackets are on the bottom ring of this hoop, so when you open the jacket up, it basically lays on top of the ring and all of the material is on top of the brackets that hold the hoop in the machine. This makes it easier to load thick jackets in the machine because the material does not need to be pulled up and over the brackets or the needle plate arm. The flat version is not good for T-Shirts or Sweatshirts because the machine adaptor brackets end up inside the garment and there is no way to get the material out of the way.
- We suggest that you order the Tubular Version, unless you only do thick jackets and blankets. The strength of both versions is exactly the same. The only difference is how the hoop is loaded into the machine.
- If you are going to use this hoop for really heavy items, you have to be careful with the weight on the machine arms and drive system. You should support the item when embroidering to take some of the weight off of the machine.
- 8x13" Tubular Version: This is the best option for hooping normal items including
T-shirts and sweatshirts. The machine adaptor brackets are on the top hoop like normal hoops.
8x13" Adjustable Fixture:
This fixture is made to hold hoops from the 6.25x8.25" size to the 8x13" size on the HoopMaster station for easier design placement. You can use the Mighty Hoops without the HoopMaster or Fixture, but having the HoopMaster andFixture makes hooping a lot easier. This fixture will work with other large sizes of Mighty Hoops that we may make in the future. This fixture only holds hoops in the middle of the Station, you can not position the 7.25" to the left or right side. If you want to use the 7.25" hoop towards the left or right side of the station or on smaller items like bags, you should purchase the special 7.25" fixture.
Mighty Hoops BR-PR1KIT Brother PRS100 Starter Kit, Hoopmaster Station, Portable Base, 100x100 Fixture, Freestyle Arm, T-Square,8x8" Mighty Hoop, Guide
 Mighty Hoops BR-PR1KIT Brother PRS100 Starter Kit, Hoopmaster Station, Portable Base, 100x100 Fixture, Freestyle Arm, T-Square,8x8" Mighty Hoop, Guide |
Our Price: $773.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
Mighty Hoop Hoopmaster Starter Kit for Brother PRS100 machines.
Included in this kit is:
- Hoopmaster Station
- Portable Base
- 100 x 100 Hoopmaster Fixture and Freestyle Arm
- T-Square
- 8" x 8" Mighty Hoop
- Pocket Guide used with 100x100 Hoop
The Mighty Hoop is a new magnetic hoop that makes hooping very easy. There is no need to adjust the outer ring as the hoop holds the garment with magnetic force and automatically adjusts for different thicknesses. It also reduces the stress on your wrists and hands because it wants to pull itself together. Even for thick garments, there is very little pressure needed to apply the hoop. Hoop burn is greatly reduced because of the way the hoop holds the fabric. Unlike clamps, Mighty Hoops are designed to work with the HoopMaster for easy accurate hooping.
**WARNING: Mighty Hoops contain very strong magnets. If you have any type of medical device that can be affected by magnets, please consult your physician before ordering. By ordering you agree that you have read and understand this warning.**
**Video for demonstration only, Starter Kit includes 8" x 8" Mighty Hoop
Included in this kit is:
- Hoopmaster Station
- Portable Base
- 100 x 100 Hoopmaster Fixture and Freestyle Arm
- T-Square
- 8" x 8" Mighty Hoop
- Pocket Guide used with 100x100 Hoop
The Mighty Hoop is a new magnetic hoop that makes hooping very easy. There is no need to adjust the outer ring as the hoop holds the garment with magnetic force and automatically adjusts for different thicknesses. It also reduces the stress on your wrists and hands because it wants to pull itself together. Even for thick garments, there is very little pressure needed to apply the hoop. Hoop burn is greatly reduced because of the way the hoop holds the fabric. Unlike clamps, Mighty Hoops are designed to work with the HoopMaster for easy accurate hooping.
**WARNING: Mighty Hoops contain very strong magnets. If you have any type of medical device that can be affected by magnets, please consult your physician before ordering. By ordering you agree that you have read and understand this warning.**
**Video for demonstration only, Starter Kit includes 8" x 8" Mighty Hoop
Extended US Warranty: 1 year replacement on defective or missing parts.
Non-US Warranty: 30 days parts and labor.
Specifications
This item includes:One HoopMaster Station,
Portable Base,
T-Square,
5.5" Fixture with FreeStyle Arm,
One 5.5" Mighty Hoop
This kit is for customers that do not already own a HoopMaster System, and would like to start out with everything they need for a 5.5" Mighty Hoop. The HoopMaster system helps align and apply the Mighty Hoops to garments. The HoopMaster is not required to use the Mighty Hoops, but it will make the hooping process quick, easy, accurate and consistent. This is the most common kit sold to new customers.
Hoop Master HOME-PC8500-KIT Brother PC-8500 One Main Station Adjustable to 3 Different Angles
 Hoop Master HOME-PC8500-KIT Brother PC-8500 One Main Station, Hoop Holding Bracket, Backing Holder Blocks |
Our Price: $405.00 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 2-3 weeks. Condition: New In Box |
Features
Extended US Warranty: 1 year replacement on defective or missing parts.
Non-US Warranty: 30 days parts and labor.
Specifications
- One Main Station – that is adjustable to 3 different angles
- 1 hoop holding bracket – made to hold all sizes of PC-8500 hoops
- 2 backing holder blocks
Please verify that the bracket and adjuster on your hoop looks like this.
Multi Task 12x8" Purse Bag Hoop Frame #4 Brother PR600-PR1000 Babylock
 |
Our Price: $279.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
We developed the Brother Multi Task Purse/Bag Hoop 4 (11.8 x 7.9) and it is only available here. This exclusive Brother Multi Task Purse/Bag Hoop 4 (11.8 x 7.9) is made with a patented Channel Bracket System, that allows users to position their selected design further down on large duffel bags, craft bags, plus size clothing and hard to hoop items that standard hoops just can not do. The Brother Multi Task Purse/Bag Hoop 4 (11.8 x 7.9) is recognized by your Brother PR600 and Babylock EMP6 so there is no worry about hitting the hoop, and you can use the standard hoop grids from Brother and Babylock. Use the Brother Multi Task Purse/Bag Hoop 4 (11.8 x 7.9) with your favorite sticky back or actually hoop the item.
- Uses existing Brother PR embroidery arm A to hold hoop in place.
- WOW a Hoop for doing embroidery on Purses.
- The best hoop for large duffel bags, craft bags, plus size clothing.
- Hoop measures: 11.8"x 7.9" (300 x 200 mm)
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Multi Task 2.4x1.6" Purse Bag Hoop Frame #1 Brother PR600-PR670E, PR1000-PR1055X, Babylock
 8143: Multi Task 2.4x1.6" Purse Bag Hoop Frame #1 Brother PR600-PR1000's Babylock |
Our Price: $219.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
We developed the Brother Multi Task Purse/Bag Hoop 1 (2.4 x 1.6) and it is only available here. This exclusive Brother Multi Task Purse/Bag Hoop 1 (2.4 x 1.6) is made with a patented Channel Bracket System, that allows users to position their selected design further down on purses, bags, shirt sleeves,pant legs, and hard to hoop items that standard hoops just can not do. The Brother Multi Task Purse/Bag Hoop 1 (2.4 x 1.6) is recognized by your Brother PR600 and Babylock EMP6 so there is no worry about hitting the hoop. Use the Brother Multi Task Purse/Bag Hoop 1 (2.4 x 1.6) with your favorite sticky back or actually hoop the item.
- Uses existing Brother PR embroidery arm A to hold hoop in place.
- WOW a Hoop for doing embroidery on Purses.
- Enables you to hoop a wide variety of items of various sizes including purses, shirt sleeves, shirt collars, pant legs, bags, totes, and hard to hoop items. The patented "Channel Bracket System" allows you to position the selected design further down on purse, bag, etc. Your Brother PR-600 and BabyLock EMP-6 will recognize our hoop thus putting away any worry in hitting the hoop! Uses all the standard hoop grids from Brother & BabyLock.
- Ideal for 1,2, and 3 letter monograms, smaller designs, etc to be placed on pockets, small purses, bags, shirt sleeves, pant legs, etc. Hoop measures:
2.4"x 1.6"(60 x 40 mm).
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Multi Task 4x4" Purse Bag Hoop Frame #2, Brother PR600-PR1000 Babylock
 |
Our Price: $219.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
We developed the Brother Multi Task Purse/Bag Hoop 2 (3.9 x 3.9) and it is only available here. This exclusive Brother Multi Task Purse/Bag Hoop 2 (3.9 x 3.9) is made with a patented Channel Bracket System, that allows users to position their selected design further down on purses, bags, shirt sleeves,pant legs, and hard to hoop items that standard hoops just can not do. The Brother Multi Task Purse/Bag Hoop 2 (3.9 x 3.9) is recognized by your Brother PR600 and Babylock EMP6 so there is no worry about hitting the hoop. Use the Brother Multi Task Purse/Bag Hoop 2 (3.9 x 3.9) with your favorite sticky back or actually hoop the item.
- Uses existing Brother PR embroidery arm A to hold hoop in place.
- WOW a Hoop for doing embroidery on Purses.
- Ideal for medium bags, purses, duffel bags, etc. Hoop measures: 3.9"x 3.9"(100 x 100 mm)
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Multi Task 5x7" Purse Bag Hoop Frame #3 for Brother PR600-PR1000 Babylock
 |
Our Price: $219.99 Prices are subject to change, and only current prices will be honored. Availability: Usually leaves the warehouse in 5-7 business days. Condition: New In Box |
Features
We developed the Brother Multi Task Purse/Bag Hoop 3 (7.1 x 5.1) and it is only available here. This exclusive Brother Multi Task Purse/Bag Hoop 3 (7.1 x 5.1) is made with a patented Channel Bracket System, that allows users to position their selected design further down on medium to large purses, bags, totes, duffel, bags, sweatshirts, t-shirts, and hard to hoop items that standard hoops just can not do. The Brother Multi Task Purse/Bag Hoop 3 (7.1 x 5.1) is recognized by your Brother PR600 and Babylock EMP6 so there is no worry about hitting the hoop. Use the Brother Multi Task Purse/Bag Hoop 3 (7.1 x 5.1) with your favorite sticky back or actually hoop the item.
- Uses existing Brother PR embroidery arm A to hold hoop in place.
- WOW a Hoop for doing embroidery on Purses.
- Great for medium to large purses, bags, totes, duffel
bags, sweatshirts, T-shirts, etc
- Hoop measures: 7.1 x 5.1" (180 x 130 mm)
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Multi Task 8x8" Purse Bag Hoop Frame #5 for Brother PR1000, PR1050X and Babylock 10 Needle Embroidery Machine
 |
Our Price: $328.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Advance Orders Only. Please review the product description for complete details. Condition: New In Box |
Features
for Brother PR1000 and Babylock ENT10, BNT10 Embroidery Machines, Let the Brother Multi Task Purse/Bag Hoop for PR1000 (8X8) expand your embroidery options. Use your PR600 series machine with the Brother Multi Task Purse/Bag Hoop for PR1000 (8X8) to enjoy a multitude of customization options. With this jumbo Brother Multi Task Purse/Bag Hoop for PR1000 (8X8), your project options are endless.
- Uses existing Brother PR embroidery arm A to hold hoop in place.
- WOW a Hoop for doing embroidery on Purses.
- The best hoop for large duffel bags, craft bags, plus size clothing.
- Hoop measures: 8x8"
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Sew Tech 5in1A Hoops 2.3x1.6/PRH60 4x4/PRH100 5x7/PRH180 8x12PRF&PRH300 for Brother PR6-680 PR1000 PR1050X, Babylock 6-10Needle Embroidery Machines
 Sew Tech 5in1A Hoops 2.3x1.6/PRH60 4x4/PRH100 5x7/PRH180 8x12PRF&PRH300 for Brother PR6-680 PR1000 PR1050X, Babylock 6-10Needle Embroidery Machines |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Embroidery Hoop Set (5in1)
PRH60/ EPF60 60x40mm, 2.4" x 1.6"
PRH100/ EPF100 100x100mm, 4" x 4"
PRH180/ EPF180 180x130mm, 7" x 5"
PRH300/EPF300 200x300mm 8" x 12"
PRF300/ BMP-FF 200x300mm, 8" x 12"
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
PRH60/ EPF60 60x40mm, 2.4" x 1.6"
PRH100/ EPF100 100x100mm, 4" x 4"
PRH180/ EPF180 180x130mm, 7" x 5"
PRH300/EPF300 200x300mm 8" x 12"
PRF300/ BMP-FF 200x300mm, 8" x 12"
NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
Non-US Warranty: 30 days parts and labor.
Specifications
FOR USE WITH:- Brother PR600/600II/600C
- Brother PR620/PR620II
- Brother PR650/PR650E
- Brother PR655
- Brother PR1000/PR1000E
- Babylock EMP6
- Babylock BMP6/BMP8/BMP9
- Babylock BND9
- Babylock ENT10
- Babylock BNT10/BNT10L
SewTech Brother PR10 Needle, 8in1A Embroidery Hoops: PRH60mm PRH100mm PRH130 PRH180mm PRH300mm PRF300 PRPH360 PRPJF360
Brother PR 8in1 Embroidery Hoops PRH60mm PRH100mm PRH130 PRH180mm PRH300mm PRF300 PRPH360 PRPJF360 |
Our Price: $299.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse on the next business day. Condition: New In Box |
Features
Includes:
- 360mm Jumbo Frame 14x14" Embroidery Hoop PRPJF360
- 360mm Extra Large 12x14" Embroidery Hoop PRPH360
- 300mm Bulky Flat 8x12" Embroidery Hoop PRF300
- 300 mm Stardard 8x12" Embroidery Reg Hoop PRH300
- 180 mm 5x7" Embroidery Hoop PRH180
- 130 mm 5x7" Embroidery Hoop PRH130
- 100 mm Embroidery Hoop PRH100
- 60 mm Embroidery Hoop PRH60
Brother Compatibility Chart for PRS100, PR670E, PR1050X and Brother Hoops that Work with each model.
Non-US Warranty: 30 days parts and labor.
DIME Snap Hoop Monster Magnetic Top Frame & Bottom Hoop 5x7 8x8 or 8x12" for Brother PR1X, PR600s, PR1000 PR1050 PR1055 Babylock Multi Needle Machines
 42319: Snap Hoop Monster Magnetic Top Frame & Bottom Hoop 5x7 8x8 or 8x12" for Brother PR1X PR600's, PR1000 PR1050X PR1055x Babylock Multi Needle Machines |
Our Price: $199.99 Prices are subject to change, and only current prices will be honored. Shipping: Free Ground Shipping to the Contiguous USA Availability: Usually leaves the warehouse in 2-3 business days. Condition: New In Box |
Features
*For Multi needle Embroidery Machines, Tubular Magnetic Top Hoop +Metal Bottom Frame, for Brother PR1X, PR600, PR620, PR650, PR655, PR1000, PR1050, PR1055 and Baby lock!
PLEASE NOTE THE CLING RULERS ARE IN CENTIMETERS ONLY. NOT INCHES
*Our top frames come with a 2 year warranty.
Bottom frames and attachments come with a 1 year warranty.
If a product is received damaged, incomplete, or defective (any fault on the manufacturer) we will not only replace the component/item but we will also be responsible for any shipping charges. If the customer selects the wrong item, isn’t satisfied with the product, or would like to switch to another size hoop (no fault on the manufacturer) then the customer will be eligible for a return. However, the customer will be responsible for any shipping charges.
PLEASE NOTE THE CLING RULERS ARE IN CENTIMETERS ONLY. NOT INCHES
*Our top frames come with a 2 year warranty.
Bottom frames and attachments come with a 1 year warranty.
If a product is received damaged, incomplete, or defective (any fault on the manufacturer) we will not only replace the component/item but we will also be responsible for any shipping charges. If the customer selects the wrong item, isn’t satisfied with the product, or would like to switch to another size hoop (no fault on the manufacturer) then the customer will be eligible for a return. However, the customer will be responsible for any shipping charges.
Extended US Warranty: 30 days replacement if defective.
Non-US Warranty: 30 days parts and labor.
Specifications
Please use reference id to the left for correct compatibility.
[Ex. LS3]
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.
SewingMachineStore and SewingMachineStore.com are property and trademarks of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.