• 10 spool embroidery thread stand fits behind embroidery sewing machine
  
• Smooth thread delivery gives better stitching results with fewer tangles
  
• Convenient and easy-to-use
  
• Comes with cone holders for cones and caps for spools
  
  * 10 Universal spool holders.
  * 10 Big & Small spool caps.
  * 2 Horizontal spool pins.
  * Adjustable thread lubricator.
  * Stable- Weighted base with 4-leg cushions.
  * Packed in color box.
  * Thread lubricant is sold separately. ( P/N: LIA-LU)

Non-US Warranty: 30 days parts and labor.

• 200 Watt Maximum Capacity
  
• Can Be Used In Most Countries
  
• Step-Up Step-Down Transformer
  
• The PD60 200 WATT step up/step down transformer is suited for allowing the portable sewing machines we carry to be used in countries with 220 volt power outlets. However, we do not sell 1000+ watt transformers needed for irons and similar products.
  
• Do not use on any appliance that uses more 200 Watts of power. Check before you plug in or damage could occur to the transformer or your appliance.

Non-US Warranty: 30 days parts and labor.

Temporary adhesive can be used for quilt basting, applique, and machine embroidery without a hoop. High tack adhesive is odorless and colorless. Will not gum needle. Adhesive disappears leaving no residue. Net weight 14.7 oz. This is an ORMD products must be ordered in full boxes.

Up to 6 per box, ORMD products are shipped ground freight only. Standard ORMD shipping procedures apply. HAZMAT MATERIAL

THIS ITEM CAN ONLY BE SHIPPED VIA REGULAR GROUND SHIPPING TO THE LOWER 48 USA STATES, NOT BY AIR OR OVERSEAS.

• Temporary, re-positionable, fabric adhesive used to temporarily bond fabric. Odorless, colorless, no mist, does not gum sewing needles. Use for machine applique, quilting, basting, holding fabric to stabilizers in machine embroidery and hemming.
  
  
• A temporary adhesive excellent for use in embroidery because there will be no needle gum-up. Use for appliqué, adhering backing to garments, and positioning difficult-to-hoop items. 17 fluid ounce can. (THIS IS A "NO FLY" PRODUCT. ONLY AVAILABLE TO CONTINENTAL UNITED STATES)
  
  1. Protect work surface with disposable paper.
  2. Shake 505 Spray & Fix can before using.
  3. Hold can 12 in. / 30 cm. from fabric surface.
  4. Always spray 505 Spray& Fix on the wrong side of the smaller fabric piece to be glued.
  5. A light spray of 505 Spray & Fix is sufficient. A little goes a long way.
  6. Using your hand, press firmly in place to secure the piece to the larger fabric.
  7. A misaligned piece may be removed and repositioned several times for 15 to 20 minutes after spraying.
  8. Machine sew in place as usual.
  9. Cleanup with soap and water.
  10. Read label on can for storage, disposal, and first aid.
  11. Test on all fabrics before using.
  
  

Non-US Warranty: 30 days parts and labor.

KAI 7000 series High-Carbon stainless steel shears—depend on an extra-long edge life and superior cutting efficiency.

The KAI 7205 8" Shear is made from high carbon, hardened stainless steel. The addition of carbon allows for a steeper cutting angle, giving the scissor a sharper, finer edge. Swedish blogger and author, Johanna Lu*, says the best way to describe KAI Scissors is “like cutting through butter”.

Introducing the KAI 7000 Series High-Carbon Stainless Steel Shears

Progress to 0:37 for a thorough demonstration on cutting durable fabrics.

The KAI 7000 Series™ High-Carbon, Stainless Steel Shears are not a reinvention of the standard cutting implements—they are the next class of professional, must-have scissors. Designed to professional standards, these tailoring-style shears are perfect for clothing construction, perfect pattern cutting, and much more. Smooth cutting action, super sharp blades, and a comfortable fit make these the sharpest, most ergonomic fabric scissors available.

The entire shear is cut via laser out of high-carbon, maloybenum and vanamium stainless steel. What does this mean to you? This process, and these materials, ensure long-lasting sharp edges and a perfect balance. Equipped with a patented double-nut interlock blade fastener, the blades are designed to prevent the common loosening screw, maintain tightness of the tool, and adjust the blade tension. Furthermore, the shears present an elegant matte finish, and come with a tasteful elastomer cushioned handle, molded to fit your fingers for a perfect grip—just like the majority of their products.

The winner of the 2005 IF Design Aware, the shears are designed for all types of fabrics, such as acrylics, sheers, denim, silks, canvas, dacron and composite sail cloth, leather, fleece, culinary use, drapery fabrics, and upholstery.

The KAI 7000 Series™ High-Carbon, Stainless Steel Shears.
A flawless cut. An elegant fit. A perfected tool.


Note: This product, specifically, is the 7205 model. The distinction is that these are the 8"/205mm edition of the 7000 line, designed for ambidextrous (left and right-handed) use.

• Blades made of high-carbon Molybdenum Vanadium stainless steel for extra-long edge life and high cutting efficiency.
  
• Full-length "blade-to-grip" design for optimal cutting balance.
  
• Novel duplex interlock screw for lasting blade tension.
  
• Ergonomically styled and padded grip made of soft elastomer plastic for maximum ease of handling.

Kai 7000 Series—Product Brochure (.PDF)

KAI SCISSORS FOR SEWING – A REVIEW by Johanna Lu*

Extended US Warranty: 90 Days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Allbrands.com has over 70 years of combined factory-trained mechanics experience in servicing portable sewing, serger, quilting, and embroidery machines. We now have premium professional repair services available on your sewing machines in-store or by mail.

For Portable Mechanical Sewing Machines without any electronics on board Minimum $199.99 Charge +$25 for Return Ship +Parts and Installation Labor. Minimum $299.99 charge for Portable Computer, Embroidery or Serger machines. Minimum $399.99 plus Freight for Multi Needle, Industrial, or Longarm machine heads. (do not send stands)

We are the Sewing Machine Doctors with a motto of Fix it Right The First Time with a warranty of 30 days on mechanical and electronic adjustments, not recleaning.
.
We Service AllBrands of Portable Machines: Brother, Babylock, Bernina, Elna, Juki, Kenmore, Necchi, Riccar, Pfaff, Singer, Viking, White, Simplicity.

Your sewing machine is your baby. We want to help you ensure the best quality stitches on your sewing, quilting, embroidery, or serger machine, that are well adjusted and running smoothly!

Review our simple 3 step process below to get started! Or, Click HERE to Email Attn: [email protected] or general mailbox Attn: [email protected] if you have any questions or want to send pictures, prior to placing your order

Mail-in or Ship in Service Plan for all portable home sewing and embroidery machines. Here is how the program works.

*$199.99 +25.00 Return Shipping Cost if mail order: on Basic Mechanical Portable Sewing Machines.

*$299.99 +25.00 Return Shipping Cost if mail order: Computerized Sewing, Embroidery Machines,Sergers, Portable Blind Hem Machines.

*$399.99 +Pallatized Freight Return Shipping Cost if mail order: on Multi Needle Embroidery, Industrial Sewing Machine Heads, and Long Arm Quilting Machine heads.

Step 1. Purchase the 149.99 dollars minimum charge repair service above plus 25 dollars added for our prepaid and insured return shipping costs in USA 48 States. $100 Upcharge for Electronic, Embroidery or Serger. $200 upcharge for Mulit Needle, Industrial, or Longarm Quilting Machines. We will email you an Authorization Number to put on the outside of the box for easy identification.

Step 2. Ship your machine insured to Allbrands.com, Attn: Service Department, 20415 Highland Road, Baton Rouge, La. 70817. Pack in original carton with all styrofoam and double boxed, or wrap in 5" of heavy bubble wrap and double boxed. Include your foot control, bobbin case, bobbin, power cord, thread, needles and fabric samples, hooped fabric with stabilizer, copies of any prior repair tickets, printouts of our email communication, order confirmation, and any written documents regarding the sewing problems you are having with your machine.

Step 3. We will service and ship your repaired machine back pre-paid and insured. If mechanical adjustments or parts are needed, our mechanics will email or call you for approval of estimates above our minimum service charges. Our charges includes removing covers, cleaning, oiling, replacing covers, and balancing thread tension in sew off. Our average repair bill includes and average of 2 mechanical or electronic adjustments

If your machine cannot be repaired or you do not want to pay for any additional parts or installation required,
the 25 dollar prepaid shipping charge will be used to return your portable machine to you un-repaired.

Why do I need to have my sewing machine serviced?

There are many moving parts in a sewing machine and if it moves, it needs lubrication. These days many of the moving parts are housed with computer circuit boards and wires around them. Our Sewing machine technicians are factory trained to maintain and service computerized sewing machines.

For best performance and years of sewing, our technicians suggest you have your machine serviced annually. Below is our 24-Point Tune-Up Checklist and a list of Sewing Machine Performance Tips that our technicians suggest between services.

Sewing Machine Performance Tips:

Keep your machine covered when not using it. Household dust, lint and pet hair can enter your machine in one of it's many openings causing all types of problems.

Keep your machine away from direct sunlight, high/low temperatures and humidity.

Use the right needle for your project and change your needle every 3 to 4 hours of sewing or after every other project. The needle is the major culprit for most sewing problems.

Use good quality thread.

Use bobbins made specifically for your machine and make sure your bobbin thread is wound tight and no loose threads are hanging.

DO NOT SEW OVER PINS! Your needle may break, you could damage the hook or pieces of the needle could fly up into your face.

Do not use canned air on your machine or blow into your machine. The lint is just being pushed further into the machine and you are spraying moisture into your machine which can cause corrosion or damage your circuit boards

Clean the bobbin area frequently. Refer to manual for instructions.

Have a 24 Point Inspection completed, at a qualified repair center, on your sewing machine once a year to keep it performing like new for years to come.

Extended US Warranty: 30 Days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Measures Top and Bobbin Thread Tensions for All Home & Industrial Machines, regardless of bobbin size or no bobbin at all. So it will work for all your sewing, quilting, embroidery, serger and blindstitch machines.

This upper thread tension gauge is a great tool for finding and setting consistent thread tensions on your top threads! This thread gauge allows an embroiderer to adjust top embroidery thread tension. The Tajima thread tension gauge will work with both commercial and home embroidery machines. The thread tension gauge is hooked to the top thread from the presser foot and by pulling on the thread the embroiderer can determine the tension the embroidery machine is exerting on the thread. The embroiderer can then adjust top tension until the desired level of tension has been attained. This simple to use pen type tension gauge is suitable for both top thread and bobbin thread tension settings.

User guide settings:

• Ideal for commercial and home machines.
  
• Recommended tension settings for Glide Polyester thread are between 90-110 grams.
  
• Time Saver - no more wasting precious time trying to set tensions.
  
• Top Thread (Rayon 120/2 or tkt. 40) Tension Value 100-130.
  
• Top Thread (Polyester 60/3 or tkt. 40) Tension Value 110-150.
  
• Underthread (Polyester 120/2) Tension Value 20-35.
  
• Madeira Rayon thread usually should run between 110-125 grams.
  
• Madeira Polyester thread usually should run between 115-130 grams.
  
  Tajima Thread Tension Gauge
  This thread gauge allows an embroiderer to adjust top embroidery thread tension. The Tajima thread tension gauge will work with both commercial and home embroidery machines. The thread tension gauge is hooked to the top thread from the presser foot and by pulling on the thread the embroiderer can determine the tension the embroidery machine is exerting on the thread. The embroiderer can then adjust top tension until the desired level of tension has been attained. - Madeira Rayon thread usually should run between 110-125 grams. - Madeira Polyester thread usually should run between 115-130 grams.
  
  This upper thread tension gauge is a great tool for finding and setting consistent thread tensions on your top threads!To Use This Item:
  
  Pull 6" of thread through needle
  
  Wrap the thread around the gauge hook
  
  Pull the gauge towards you with the numbers facing up
  
  As you pull, take note of the reading as this is the tension reading in grams. Polyester tension should be 120-150 grams and Rayon should be 100-120 grams.
  
  Adjust you main tension knob until you get the correct reading.

Non-US Warranty: 30 days parts and labor.

Keep your sewing and embroidery thread organized by project, color, or usage! Convenient and writable area on box lid to label contents.

30 spool acrylic box for easy thread storage. Perfect for storing your Isacord or any other 1000 meter or 1100 yard thread cones.
#HTL-0921

Brewer 30 Spool Thread Storage Box

HTL-0921
11-5/8" x 10-1/8" x 3" tall
Keep your sewing and embroidery thread organized by project, color, or usage!
Convenient and writable area on box lid to label contents.
*Clear for easy thread viewing
*Stackable
*Sturdy

Non-US Warranty: 30 days parts and labor.

The top choice for commercial embroidery shops, large and small, Magna-Glide Classics will run nearly forever without a glitch in tension.

Uniform Tension Control

• Our patented magnetic core creates consistent delivery throughout the entire bobbin. No more interruptions for tension adjustments as your bobbin gets smaller. Magnetic core prevents backlash or over spin and eliminates the need for backlash springs.
  
  Fewer Bobbin Changes
  
• Our magnetic core bobbin offers significantly more stitches per bobbin reducing defects and increasing productivity.
  
  High-Quality Yarn
  
• Fil-Tec uses only the finest quality, high tenacity polyester yarns to make it patented magnetic core embroidery bobbin.
  
  Clean Running
  
• Advanced EB cross-link technology reduces lint and residual build-up in the bobbin case and tension spring. The result is a more trouble-free bobbin.
  
  Made in the USA:
  
• Magna-Glide Classics are proudly produced by Fil-Tec in the United States. Fil-Tec is a strong supporter of American manufacturing.

Non-US Warranty: 30 days parts and labor.

The top choice for commercial embroidery shops, large and small, Magna-Glide Classics will run nearly forever without a glitch in tension.

Uniform Tension Control

• Our patented magnetic core creates consistent delivery throughout the entire bobbin. No more interruptions for tension adjustments as your bobbin gets smaller. Magnetic core prevents backlash or over spin and eliminates the need for backlash springs.
  
  Fewer Bobbin Changes
  
• Our magnetic core bobbin offers significantly more stitches per bobbin reducing defects and increasing productivity.
  
  High-Quality Yarn
  
• Fil-Tec uses only the finest quality, high tenacity polyester yarns to make it patented magnetic core embroidery bobbin.
  
  Clean Running
  
• Advanced EB cross-link technology reduces lint and residual build-up in the bobbin case and tension spring. The result is a more trouble-free bobbin.
  
  Made in the USA: Magna-Glide Classics are proudly produced by Fil-Tec in the United States. Fil-Tec is a strong supporter of American manufacturing.

Non-US Warranty: 30 days parts and labor.

*Clear Spun Poly Bobbin Thread White for Brother Embroidery Only Machines: HE1 PE500 PE540D PE545 PE550 PE700 PE700II PE750 PE770 PE780 PE800 PE900 NS1750 SB7050E, SB7500, SB7900, NQ1400 NQ1600 NQ1700 VE2200 VE2300 XE1

"Save 80% on 90wt Prewound Bobbins vs Winding Your Own Bobbins and keep the reusable Plastic Bobbins that come with Prewound Bobbins Free! Brother EBTPE 1100 Yard Single Spools of 90wt Bobbins Thread cost $10-15 or 1 cent per yard to wind yourself onto your own 50 cent cost empty bobbins. Prewound bobbins cost only 0.2 cents per yard ON THE Bobbin!. Prewound bobbins also have more consistent winding tension and fill in better than bobbins wound on your machine". John Douthat, Owner & Tech, AllBrands


*Also For Instruction Manual Specified Exclusive Use With all Brother Embroidery-Only Machines: PE-700, PE-750D, PE-700II, PE-780D, PE770, PE800, PE900, PE500, Simplicity SB7050E, DreamMaker™ XE VE2200, HE1, BP2100

Also For Brother Embroidery Only Machines PE500, HE1, VE2200, Simplicity SB7050, and Comparable Babylock Embroidery Only Machines.

Non-US Warranty: 30 days parts and labor.

We make it easy to give for embroidery customers to have everything they need to start enjoying their new machine immediately. Packed in a sturdy box, this box gets new machine owners started with the highest quality thread and stabilizers, plus more at this low price.

H2201K Starter Kit:
This kit contains everything you need to start enjoying your embroidery machine. The kit includes:
20 Pieces of Exquisite 8" X 8" Medium Weight Tearaway
20 Pieces of Exquisite 8" X 8" Medium Weight Cutaway
One 1000 meter spool of Exquisite Poly Thread in each of the following 6 colors: black, white, red, navy blue, green, and crocus (gold)
One pair of 3 1/2" Curved Tip Embroidery Scissors
6 Size A Class 15 Plastic Sided Bobbins

Non-US Warranty: 30 days parts and labor.

Ten Reasons To Own The Durkee Hooping Pro

No Additional Purchases*for Tubular Hoops, Magnetic Hoops, Wooden Hoops, and Single Needle Hoops, No Additional Attachments or Fixtures Required.

Please note the project stations are sold separately.

Use almost any size hoop from any manufacturer including traditional tubular hoops, wooden hoops, or magnetic hoops. There are NO ADDITIONAL purchases to be made for parts, pieces, or fixtures to accommodate different size hoops.

Two Stations
Two Hooping Pro stations available – A “Full Station” for polo shirts, t-shirts, jackets, etc. and an optional narrower “Project Station” for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.

Cross-Hair Laser Light
The “Full Station” comes with a fully adjustable cross-hair laser light with articulating arm to assist in centering and aligning.

Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.

Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.

Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.

Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.

Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.

Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.

Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.

Non-US Warranty: 30 days parts and labor.

Great for smaller, narrower embroidery projects such as shirt sleeves, pant legs,
Two Stations
Two Hooping Pro stations are available – An optional “Full Station” for polo shirts, t-shirts, jackets, etc. and the narrower “Project Station” on this page for specialty projects such as shirt sleeves, pant legs, hat backs, bags, etc.

Slot Design
Slot Design allows for Infinite width adjustment and lets the embroiderer hoop their project precisely where THEY want.

Brass Stops
Each station comes with adjustable Brass Stops with rubber “bumpers” to securely hold consistent tension on outer rings during hooping.

Recessing Made Easy
Each Brass Stop has a “platform” to elevate the outer ring slightly above the station table. Thus, when the frame or inner ring is inserted and fully depressed into the outer ring on the station, the outer ring will be correctly recessed when removed from the table.

Ready-To-Go Out of the Box
Each Full Station comes with 8 Brass Bumper stops. Each Project Station comes with 6 Brass Bumper stops.

Designed for Ease of Use
Both stations have three table angles to provide the most ergonomically comfortable hooping position for the embroiderer.

Built Right –Built to Last
Solid steel legs with rubber feet prevent station movement during hooping. Additional holes in the base legs are provided so the station can be permanently attached to the embroiderer’s existing work surface if desired.

Ready to Work
Both stations come with their own Backing/Stabilizer holder and Freedom Ring holder.

Non-US Warranty: 30 days parts and labor.

When accuracy, minute details, and preservation count, the unparalleled archival quality of pigma micron pens makes them everyone's first choice.

Artist, writers, and illustrators reach for pigma micron and know their work is safeguarded with the permanence of pigma ink.

The first disposable technical pen using archival pigmented ink, pigma micron ink pen is selected for finepoint technical and artistic applications.

A formulation of pigment based inks, more complex and stable than dye based inks, pigma ink has become the standard for what is defined as reliable, permanent, archival quality ink. Experience smooth, skip-free writing and crisp ink colors that leave consistent lettering and lines every time.

Applicable for graphic art, scrapbook, archival recording, pen and ink illustrations, freehand art, rubber stamps, cartooning, fabric design.

• 2 Black
  
• 1 Blue, Red, Green, Brown, Purple, Yellow, Orange, Rose, Sepia, Royal Blue, Burgundy, Hunter Green Blue/Black and Fresh Green
  
  Pigma Micron 05 Archival Ink
  

Non-US Warranty: 30 days parts and labor.

You must already have the existing HP2 station to use this attachment.

This video explains all three additional station options for the HP2 Product Station.

Non-US Warranty: 30 days parts and labor.

"As a machine embroiderer I am always looking for easy solutions to many of life's embroidery challenges. That's why I designed the Embroidery Tool Kit.

"Everything you need for professional results is in one easy-to-use, affordable package. A comprehensive kit, The Embroidery Tool Kit combines my favorite tools with some new essentials never before offered. Whether you are facing hooping challenges or complex design placement, this kit has the tools to guarantee success. I know you will find the Embroidery Tool Kit a useful addition to your sewing room." Eileen Roche

Benefits:

• Ideal for every embroiderer-novice to seasoned professional.
  
• No learning curve required! Use the easy to follow instructions for expert results.
  
• Spend more time embroidering and less time doing rework!
  
• Improve the quality of your embroidery.
  
• Stretch your embroidery budget.
  
  The Embroidery Tool Kit is ideal for any embroiderer from the novice to the seasoned professional. No learning curve required! Use the easy to follow instructions for expert results.
  
  Now you can spend more time embroidering and less time doing rework while improving the quality of your embroidery and stretching your embroidery budget.
  

Non-US Warranty: 30 days parts and labor.

Add 3-dimensional flair and excitement to your computerized embroidery, free-motion and machine satin stitches by using Sulky 2MM Puffy Foam. It perforates cleanly when stitched through and makes the stitching stand well above the fabric. Puffy Foam is made from high quality ethylene vinyl acetate foam made just for use on home sewing machines. It is acid-free, non-toxic and water-resistant. It is widely seen commercially in headgear and washable wearables. Sulky embroidery Puffy Foam is available in 2mm and 3mm thickness. Find Wonderful Puffy Foam projects featured in the Sulky Stabilizer Book: "Sulky Secrets to Successful Stabilizing".Package contains three 6" x 9" pieces of 2MM Puffy Foam.

Check our this blog post - on How To Use Puffy Foam -- it will change your life!

Non-US Warranty: 30 days parts and labor.

Non-US Warranty: 30 days parts and labor.

• 200 Watt Maximum Capacity
  
• Can Be Used In Most Countries
  
• Step-Up Step-Down Transformer
  
• The PD60 200 WATT step up/step down transformer is suited for allowing the portable sewing machines we carry to be used in countries with 220 volt power outlets. However, we do not sell 1000+ watt transformers needed for irons and similar products.
  
• Do not use on any appliance that uses more 200 Watts of power. Check before you plug in or damage could occur to the transformer or your appliance.
  
  110V AC to 220V AC or 220V AC to 110V AC
  Heavy Duty Transformer for safety and reliability
  ON/OFF switch with indicator light
  Universal output receptacles (will accept European 2 round pin plug, North American 2 flat pin and 3 prong plug)
  SAFETY FEATURES INCLUDE:
  Built-in (non-detachable) power cord with strain relief
  Fused Protection
  Safety polarized input switch (100V AC, 200V AC, 220V AC and 240V AC)
  Non slip rubber feet

Non-US Warranty: 30 days parts and labor.

Item# WT-COQSPW27-S4
These are shank specific, so please prompt confirm the sewing machine make and model# of your sewing machine.
Set includes 5-1/2", 7-1/2", 9-1/2" & 11-1/2" sized designs

Non-US Warranty: 30 days parts and labor.

14 Page Printed Booklet contains project ideas and instructions for the ScanNCut DX Machine.

Project 1: Woven Basket
Project 2: Christmas Scene
Project 3: Wall Decoration
Project 4: Photo Frame
Project 5: Mask
Project 6: Tattered Lace Box
Project 7: Garland Banner
Project 8: Flower Wreath
Project 9: Stained Glass Mobile
Project 10: House Clock Model

Older 2014 Project Ideas and Instructions for Brother ScanNCut - Out of Print(.PDF)

Non-US Warranty: 30 days parts and labor.

Media Width: 15/32"
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Floral
Color: Purple

Non-US Warranty: 30 days parts and labor.

Media Width: 15/32"
Media Length: 13 1/8 ft
Printed Design/Pattern/Texture: Chevron
Color: Mint

Non-US Warranty: 30 days parts and labor.

Great for continuous borders and for background fills.

PT1 – 1″ x 1″ & 3″ x 3″ $24.00
PT2 – 1-1/2″ & 2″ x 2″ $24.00
PT3 – 1″ x 2″ & 1/2″ x 3″ $24.00
PT4 – 1″ x 1-1/2″ & 1/2″ x 2″ $70.00

Available individually or 4pc Set

*An Original Design by Leonie West

Non-US Warranty: 30 days parts and labor.

Package Includes: One (1) Hooping Pro Full Station, One (1) Hooping Pro Project Station w/One (1) set of Stabilizing Legs, and One (1) Hooping Pro "junior" Board w/ One (1) Additional Set of Stabilizing Legs

Non-US Warranty: 30 days parts and labor.

1 Left In Stock! ScanNCut DX Innovis Edition is packed with so many new features for virtually endless possibilities in cutting thicker materials with the new AutoBlade, Wireless network ready.

* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores

*Only the new SDX325 and SDX330D have the My. Connection link to the XP2. There will not be an upgrade available for the previous or other DX models to have this feature.* Brother

• 682 built-in designs
  
• Cuts materials up to 3mm in thickness‡
  
• 600dpi built-in scanner with on screen editing
  
  
  
  
  Main Features
  
  
• Blade Sensor Technology: Auto blade detects the thickness of material, no blade adjustment or material selection required.
  
• Cut Up To 0.1” (3 mm) in Thickness: The Brother Home Electronic Cutting Machine effortlessly cuts materials‡ such as foam and felt with the Auto Blade.
  
• On-Screen Editing: Editing designs is fast and easy. This ScanNCut machine comes with a 5” LCD touchscreen display.
  
• Stand-Alone: Create a project right out of the box without using a computer or mobile device.
  
• Fully Detailed Designs: Features a total of 682 built-in designs, including 100 quilt patterns, and 9 letter fonts, this Brother Cutting Machine produces detailed work.
  
• Wireless Network Ready: Wirelessly connect‡ your PC or mobile device to transfer cut data from the Brother CanvasWorkspace application.
  
• Perfect for Quilters and Sewers: The Brother SDX125 Electronic Cutting Machine provides a ¼” increment seam allowance to piece together fabric.
  
• Advanced editing with Canvasworkspace Free software to create, edit, convert and send cut data to and from the machine
  
  What's the formula for perfect crafting success? Just add imagination! Now, the only series of home and hobby cutting machine with a built-in scanner has essentially everything else you need to create stunning projects right out of the box. With Brother's ScanNCut DX perfect crafting success becomes a reality. The Brother ScanNCut DX was designed for the hobby enthusiast who is looking for an efficient and clean way to cut materials such as felt and foam without frays or damage. Brother’s Auto Blade sensor technology automatically detects the thickness of your materials to cut precise custom and built-in patterns. The Brother SDX125E ScanNCut cutting machine comes with 682 built-in designs, including 100 quilt patterns, and 9 letter fonts—these provide you with multiple ways to quickly create and edit designs on the 5” LCD touchscreen display, plus 76 SVG files included, Birthday Collection, Greeting Cards Collection, Flowers & Valentines Collection (Available with CanvasWorkspace for web only). Visit at: https://canvasworkspace.brother.com
  
  This electronic cutting machine is perfect for sewers and quilters. With the Brother SDX125E, struggling to piece together fabric when working on various sewing and quilting projects is a thing of the past. The Brother ScanNCut DX gives you the ability to add a seam allowance in ¼” increments to assist you in assembling fabric pieces for your quilts, clothing, and more.
  
  With a simple internet connection, you’ll be able to access and work with Brother CanvasWorkspace to create virtually anywhere and anytime. Work remotely with your tablet, mobile device, or PC. This Brother cutting machine is wireless network ready. While connected to the same internet network, wirelessly send your cut files directly to your Brother ScanNCut DX. The Brother SDX125 is also whisper quiet, allowing you to cut materials with ease and without disturbing others. This Brother machine is backed by a 1 year limited warranty along with free customer phone and online technical support for the life of the product.
  
  Brother SDX125e Software Update

Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Convert any vacuum into a powerful micro vac and clean the smallest areas. Easily attaches to any vacuum hose. Clean computers, office machines, auto interiors, sewing machines, stereo and video equipment. - Alternative number 7625

Mini Vacuum Attachment Clean hard to reach areas with full vacuum power.Instead of blowing dirt and lint further into crevices, use these attachments to clean your sewing machine, serger, VCR, and computer keyboard. Includes special adaptor to attach to any vacuum hose, oval and round brushes, crevice tool, and two extensions

"Suck the lint and thread out of your sewing machine with these vacuum attachments, rather than blowing the lint back into the machine with canned air or air compressors." John Douthat, Owner & Tech

Convert any vacuum into a powerful micro vac and clean the smallest areas. Easily attaches to any,vacuum hose. Clean computers, office machines, auto interiors, sewing machines, stereo and video,equipment.

Now it is possible to convert your full-size vacuum cleaner into a micro-vacuum cleaner with the revolutionary patented Micro Vacuum Attachment Kit. The eight-piece kit comes with an adapter that connects these tools any vacuum. Cleaning dust from sensitive electronic equipment such as computers and keyboards, VCRs, CD and DVD players can be done with ease. Sewing machines, sergers, dollhouses, figurines and even delicate collectibles can be thoroughly cleaned, even studio, guitar equipment, and your favorite keyboards...

Features:
* Allows you to clean those places that were previously inaccessible with standard size vacuum cleaner attachments
* Comes with universal vented adapter, connector, 36" flexible hose, oval brush, round brush, crevice tool, straight & curved extension wands
* Anti-static plastic

Compare to Sewing machine hand vacuum cleaner by Riccar.

Non-US Warranty: 30 days parts and labor.

When it comes time to up your fabric crafting game with fabric appliqués, felt, foam, reach for the fabric-inspired ScanNCut DX SDX325, 9 Optional Disney Patterns

* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores

9 Optional Disney Pattern Collections for ScanNCut Canvas so you do not need a ScanNCut Disney model to have access to Disney Designs!

*Only the new SDX325 and SDX330D have the My Connection link to the XP2. There will not be an upgrade available for the previous models to have this feature.*

*Send Designs to and from SDX325 to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.

For the crafting hobbyist who loves fabric, the ScanNCut DX SDX325 is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.

With 1303 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX325 can provide endless creativity. The stand-alone SDX325 has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.

With the Thin Fabric Auto Blade, you can cut fabric for quilting and raw edge applique purposes so you can quilt with ease and save time by cutting multiple pieces for your projects. Combine your love of fabric and crafting into one with the SDX325

PLUS, OVER $720 IN ADDED VALUE!
• Thin Fabric Auto Blade and Holder $43.98 MSRP
• Erasable Pen Set (2 pcs) $14.99 MSRP
• Fabric Mat 12" x 12" $39.99 MSRP
• Iron-on Fabric Appliqué Contact Sheets (2 pcs) $14.99 MSRP
• Built-in One Point Designs 1,163 ($575.19 Value)
• Built-in Quilt Designs 140 ($39.60 Value)

* Synchrony Bank Sewing & More Card, Fixed Monthly Payments, 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval, then Checkout Online Purchases

Cutting fabric is easy! For the crafting hobbyist who loves fabric, the SDX325 is the perfect addition to any sewing studio or craft room. Create beautiful projects with the ScanNCut DX Innovis Edition Fabric Bundle! The ScanNCut DX is the only cutting machine on the market with true blade sensing technology and a built-in scanner! The blade sensing technology allows you to cut materials up to 3 MM in thickness‡ without adjusting your blade pressure settings and the built-in scanner adds an extra element to your creativity. Scan in fabric and easily cut out applique with the direct cut function or turn a hand made drawing into a sticker the creativity is endless with the ScanNCut DX line up! The ScanNCut DX Innovis Edition is the only ScanNCut DX that can read PES/PHX files!‡ Pull embroidery files from your XP2 or Luminaire to create drawings, foiling accents and embossing projects!

Click here for more information on the Brother SDX325F (.pdf)

This is the perfect companion for the Stellaire or Luminaire!

Features:
BLADE SENSOR TECHNOLOGY
• Auto Blade detects the thickness of material

CUTS UP TO 0.1˝ (3 MM) THICKNESS
• Cut materials such as foam and felt effortlessly with Auto Blade‡

WIRELESS LAN WITH MY CONNECTION
• The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the 'My Connection' tile.

STAND-ALONE (NO PC REQUIRED)
• 5" LCD touchscreen display for easy editing of cut data

ADVANCED EDITING WITH CANVASWORKSPACE
• Create, edit, convert, and send cut data to and from the machine PES/PHC/PHX FILE READABILITYˆ
• Convert PES/PHC/PHX embroidery fi les to cut data directly
on the machine^
• Use most PES/PHC/PHX embroidery fi les for drawing, embossingˇ and foilingˇ data

BUILT-IN SCANNER (900 DPI)
• Scan in fabric so you can easily turn creative handmade drawings into your next fun project.

*Matless Cutting – Roll Feeder Attachment
**Optional Accessory Available

Built-In Designs:

• 1,303 built-in designs
  
• Including 140 quilt patterns
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  My Connection Feature
  
  
  Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
  
  
  
  
  
  
  
  
  

Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Brother 2024 Gift Guide Rebate Form


* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores

"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech

*Send Designs to and from SDX330D to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.

For the crafting hobbyist who loves fabric, the ScanNCut DX SDX330D is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.

With over 1485 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX330D can provide endless creativity. The stand-alone SDX330D has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores

"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech

Bring a touch of Disney to your crafting with the Limited Edition Disney ScanNCut DX Innov-ís Edition.

The latest in the evolution of the successful ScanNCut line comes in the form of the Limited-Edition Disney ScanNCut DX Innov-ís SDX330D, also now known as your Disney electronic cutting machine. The SDX330D has 132 built-in Disney designs, along with 140 quilt patterns, 17 lettering fonts, and endless creative possibilities. The SDX330D features revolutionary Blade Sensor technology, which can cut materials such as felt and foam, up to 3MM thick. Use the SDX330D to scan and cut virtually any materials up to 3mm thick so you can make personalized apparel, fun quilts, dazzling home décor, and customized artwork designs. The SDX330D has all the innovative features and trusted Brother reliability for today's creative hobbyists, budding entrepreneurs, and Disney fans.

• BLADE SENSOR TECHNOLOGY WITH AUTO BLADE

Auto Blade detects the thickness of material

CUTS UP TO 0.1" (3MM) THICKNESS

Cut materials such as foam and felt effortlessly with Auto Blade

WIRELESS LAN WITH MY CONNECTION

The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the ‘My Connection’ tile.

STAND-ALONE (NO PC REQUIRED)

5" LCD touchscreen display for easy editing of cut data

BUILT IN SCANNER

Seamlessly scan hand-drawn designs and sketches

PES/PHC/PHX FILE READABILITY^

Convert PES/PHC/PHX embroidery files to cut data directly on the machine
Use most PES/PHC/PHX embroidery files for drawing, embossingˇ and foilingˇ data

WHISPER QUIET MECHANISM

New For 2022: Introducing the NEW ScanNCut Innov-ís Edition DX SDX330D | Brother Crafts USA

Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX

Everyone please save this link, it is another indebth tutorial on Luminaire ScanNCut transferring

Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX

Extended US Warranty: 5 years motor, 3 years parts, Lifetime belt, 1 year labor

Non-US Warranty: 30 days parts and labor.

for Crafters of All Levels, Make mom's day special with the P-touch Embellish ELITE Connectable Decorative Ribbon & Tape Printer. Decorate and design on the spot with personalized satin ribbons, decorative and washi tapes. Add a thoughtful, extra-special touch to gifts, crafts and so much more.

Great for gift-wrapping craft projects and more! This 9.5x10x3.75 Inch package contains one ribbon and tape printer with pre-designed templates, fourteen fonts, ninety- four frames and over 400 symbols, one touch keys for easy formatting, 13.1 Feet of .47 Inch wide gold on white satin ribbon and one user's guide. Required six AAA batteries not included.

• Design and print unique decorative ribbon and tape accents up to
• 1”
  
• Elevate crafting skills using your smartphone, tablet with the P-touch Design&Print2 app or P-touch Editor software from your PC
  
• Pre-designed craft templates inspire creativity
  
  The Brother P-touch Embellish ELITE Connectable Decorative Ribbon and Tape Printer PTP715eBT, is a unique, Bluetooth® enabled crafting machine that uses
• 1” (24mm) wide ribbons and decorative tapes, offering more fonts, more symbols and even more design options to inspire your inner crafter. Easily connect with free design software available on your smartphone, tablet or PC to design and print imaginative, customized ribbon and tape accents to add your very own personalized touches to parties, gifts, organization, crafts and so much more with virtually unlimited creative freedom.
  
  Main Features
  
  
• MAKE EVERY CRAFT UNIQUE WITH PERSONALIZED RIBBON AND TAPE ACCENTS Easily design and print decorative ribbons and tapes to add a thoughtful, extra-special touch to gifts, party favors, crafts, scrapbooks, craft storage and so much more.
  
  
• CRAFTING MADE SIMPLE Crafters of all levels will be inspired by the collection of craft templates, fonts, patterns, symbols and emojis available via smartphone, tablet or PC.
  
  
• ELEVATE CRAFTING SKILLS USING CONNECTABLE TECHNOLOGY Wirelessly connect to a smartphone or tablet and use the free Design&Print2 app* to access craft-focused templates to create your own custom ribbons and tapes.
  
  
• PERSONALIZE CREATIONS WITH YOUR OWN DESIGNS Unleash your creative freedom by connecting the P-touch Embellish ELITE to a PC and using FREE P-touch Editor software to upload and incorporate custom graphics and images into your designs.
  
  
• A VARIETY OF SATIN RIBBONS AND DECORATIVE TAPES Expand your creativity with P-touch Embellish
• 1” (24mm) wide satin ribbons and decorative tapes plus P-touch Embellish
• 1/2” (12mm) wide ribbons, decorative and washi tapes for more possibilities.
  
  
  
  
  
  
  
  
  See More Videos on the new Brother PTP715EB P-Touch Embellish Elite Connectable Decorative Ribbon Tape Printer up to 1"Wide
  
  
  IMAGINE, ENHANCE
  AND EMBELLISH
  THE MOMENTS THAT
  MATTER

Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

Organize your thread with these stackable 30 spool ABS plastic thread boxes for easy spool storage. Our new and improved thread organizer is made from ABS plastic so it is crack resistant. This is the perfect organizer for your Isacord thread collection. Each box measures 11½ x 10¼ x 3". Set of 6 boxes.

Non-US Warranty: 30 days parts and labor.

*Available in Stores Only*
Click Here to Contact an AllBrands Location Near You!

Non-US Warranty: 30 days parts and labor.

*Available in Stores Only*
Click Here to Contact an AllBrands Location Near You!

Non-US Warranty: 30 days parts and labor.

100% Plain-woven Cotton 4-sided Hem, Hanger Loop 18x28 inches Stripes run along long side.

Non-US Warranty: 30 days parts and labor.

SewTech SA146 Open Toe Foot 5mm

Non-US Warranty: 30 days parts and labor.

25 pre-cut sheets of Adhesive Sew N Wash wash away stabilizer for use with the Sticky Hoop.

• Perfectly sized pre-cut adhesive stabilizer sheets with strong stable hold
  
• Holds securely without hard-to-remove hoop marks
  
• Easily holds small, odd-shaped, and hard-to-hoop items
  
• Allows for easier trimming at the machine because the Sticky Hoop is sideless!
  
  How to use Sticky Hoop:
  Remove the protective paper from the Adhesive Sew N Wash stabilizer. Place the metal frame (sold separately), wrong side up, and finger press the sticky side of the stabilizer to the wrong side of the metal frame. Turn the hoop right side up.
  
  Place your item on the adhesive stabilizer, attach the frame to the machine and stitch the design.
  
  Designed for Ease:
  Sticky Hoop comes with a metal bottom frame. The bottom frame includes a machine attachment that is recognized by the embroidery machine.
  
  Snap Hoop Monster® Owners - Please Note:
  The Sticky Hoop frame and Snap Hoop Monster® frames are not interchangeable. Each has been designed to perform its intended task efficiently and smoothly. Applying adhesive to the bottom of Snap Hoop Monster® will remove the hoop’s ability to glide effortlessly across the machine bed. Conversely, The Sticky Hoop frame should ONLY be used with adhesive applied to the back of the frame.
  

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Tearaway stabilizer that dissolves in the wash. Simply tear excess stabilizer from the finished embroidery. Any remaining residue will dissolve with regular washing. More than one washing may be needed for complete removal. Ideal for towels or linens where the back side of the embroidery is visible.

Shrink-wrapped product comes in our new revolutionary Forever Label system with a permanent, color-coded fiberboard ring with easily identifiable usage icon.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use for Online Checkout or in AllBrands stores

"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech

*Send Designs to and from SDX330D to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.

For the crafting hobbyist who loves fabric, the ScanNCut DX SDX330D is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.

With over 1485 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX330D can provide endless creativity. The stand-alone SDX330D has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores

"AllBrands is a Brother Authorized Dealer and ASC Authorized Service Center for any repairs including warranty parts and labor. We give unlimited technical support by email, fax and phone. We service machines in our stores and/or refer to nearest ASC centers nationwide. Mass merchants do not have tech service or repair departments for your equipment. They are unable to help you directly, only referring any operational, mechanical or electronic questions back to the manufacturer instead of taking care of problems themselves. Manufacturers and customers should expect that any problems will be taken care of by the dealer or merchant who sold you the equipment, not just by referring your requests back to the manufacturer." John Douthat, Owner & Tech

Bring a touch of Disney to your crafting with the Limited Edition Disney ScanNCut DX Innov-ís Edition.

The latest in the evolution of the successful ScanNCut line comes in the form of the Limited-Edition Disney ScanNCut DX Innov-ís SDX330D, also now known as your Disney electronic cutting machine. The SDX330D has 132 built-in Disney designs, along with 140 quilt patterns, 17 lettering fonts, and endless creative possibilities. The SDX330D features revolutionary Blade Sensor technology, which can cut materials such as felt and foam, up to 3MM thick. Use the SDX330D to scan and cut virtually any materials up to 3mm thick so you can make personalized apparel, fun quilts, dazzling home décor, and customized artwork designs. The SDX330D has all the innovative features and trusted Brother reliability for today's creative hobbyists, budding entrepreneurs, and Disney fans.

• BLADE SENSOR TECHNOLOGY WITH AUTO BLADE

Auto Blade detects the thickness of material

CUTS UP TO 0.1" (3MM) THICKNESS

Cut materials such as foam and felt effortlessly with Auto Blade

WIRELESS LAN WITH MY CONNECTION

The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the ‘My Connection’ tile.

STAND-ALONE (NO PC REQUIRED)

5" LCD touchscreen display for easy editing of cut data

BUILT IN SCANNER

Seamlessly scan hand-drawn designs and sketches

PES/PHC/PHX FILE READABILITY^

Convert PES/PHC/PHX embroidery files to cut data directly on the machine
Use most PES/PHC/PHX embroidery files for drawing, embossingˇ and foilingˇ data

WHISPER QUIET MECHANISM

New For 2022: Introducing the NEW ScanNCut Innov-ís Edition DX SDX330D | Brother Crafts USA

Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX

Everyone please save this link, it is another indebth tutorial on Luminaire ScanNCut transferring

Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX

Extended US Warranty: 5 years motor, 3 years parts, Lifetime belt, 1 year labor

Non-US Warranty: 30 days parts and labor.

* Synchrony Bank Sewing & More Fixed Payments 0% No Interest Financing with approved credit!

Click HERE to Apply Online for Synchrony Bank Sewing and More Credit Card Approval to use in AllBrands stores

9 Optional Disney Pattern Collections for ScanNCut Canvas so you do not need a ScanNCut Disney model to have access to Disney Designs!

*Only the new SDX325 and SDX330D have the My Connection link to the XP2. There will not be an upgrade available for the previous models to have this feature.*

*Send Designs to and from SDX325 to XP2 exclusively (except Disney designs) with "My Connection" WiFi Wireless capability. Feature Set:
•WLAN – My Connection (NEW)
•NOTE*Firmware update needed.
•(Available 8/5/2021)
Only the new ScanNCuts SDX330D and SDX325F have the ability to upload designs from SNC to XP2 and from XP2 to ScanNCut.

For the crafting hobbyist who loves fabric, the ScanNCut DX SDX325 is the perfect addition to any sewing studio or craft room. The all NEW WLAN feature allows you to seamlessly transfer your designs back and forth between the ScanNCut DX and a Brother XP2 sewing machine using the 'My Connection' tile.

With 1303 built-in designs, Blade Sensor Technology (cut materials up to 3MM‡ thick), and a built-in scanner, the SDX325 can provide endless creativity. The stand-alone SDX325 has a generous 5” LCD touchscreen display that allows for unlimited editing, resizing, and rotating both built-in and homemade designs and patterns.

With the Thin Fabric Auto Blade, you can cut fabric for quilting and raw edge applique purposes so you can quilt with ease and save time by cutting multiple pieces for your projects. Combine your love of fabric and crafting into one with the SDX325

PLUS, OVER $720 IN ADDED VALUE!
• Thin Fabric Auto Blade and Holder $43.98 MSRP
• Erasable Pen Set (2 pcs) $14.99 MSRP
• Fabric Mat 12" x 12" $39.99 MSRP
• Iron-on Fabric Appliqué Contact Sheets (2 pcs) $14.99 MSRP
• Built-in One Point Designs 1,163 ($575.19 Value)
• Built-in Quilt Designs 140 ($39.60 Value)

* Synchrony Bank Sewing & More Card, Fixed Monthly Payments, 0% No Interest Financing with approved credit! Click HERE to Apply Online for Synchrony Bank Credit Approval, then Checkout Online Purchases

Cutting fabric is easy! For the crafting hobbyist who loves fabric, the SDX325 is the perfect addition to any sewing studio or craft room. Create beautiful projects with the ScanNCut DX Innovis Edition Fabric Bundle! The ScanNCut DX is the only cutting machine on the market with true blade sensing technology and a built-in scanner! The blade sensing technology allows you to cut materials up to 3 MM in thickness‡ without adjusting your blade pressure settings and the built-in scanner adds an extra element to your creativity. Scan in fabric and easily cut out applique with the direct cut function or turn a hand made drawing into a sticker the creativity is endless with the ScanNCut DX line up! The ScanNCut DX Innovis Edition is the only ScanNCut DX that can read PES/PHX files!‡ Pull embroidery files from your XP2 or Luminaire to create drawings, foiling accents and embossing projects!

Click here for more information on the Brother SDX325F (.pdf)

This is the perfect companion for the Stellaire or Luminaire!

Features:
BLADE SENSOR TECHNOLOGY
• Auto Blade detects the thickness of material

CUTS UP TO 0.1˝ (3 MM) THICKNESS
• Cut materials such as foam and felt effortlessly with Auto Blade‡

WIRELESS LAN WITH MY CONNECTION
• The WLAN feature seamlessly transfers your designs back and forth between the ScanNCut DX and the Brother XP sewing machines using the 'My Connection' tile.

STAND-ALONE (NO PC REQUIRED)
• 5" LCD touchscreen display for easy editing of cut data

ADVANCED EDITING WITH CANVASWORKSPACE
• Create, edit, convert, and send cut data to and from the machine PES/PHC/PHX FILE READABILITYˆ
• Convert PES/PHC/PHX embroidery fi les to cut data directly
on the machine^
• Use most PES/PHC/PHX embroidery fi les for drawing, embossingˇ and foilingˇ data

BUILT-IN SCANNER (900 DPI)
• Scan in fabric so you can easily turn creative handmade drawings into your next fun project.

*Matless Cutting – Roll Feeder Attachment
**Optional Accessory Available

Built-In Designs:

• 1,303 built-in designs
  
• Including 140 quilt patterns
  
• Including 17 lettering fonts
  
  
  
  
  
  
  
  
  
  
  
  
  
  My Connection Feature
  
  
  Using My Connection on the Luminaire to send a built-in appliqué design to the ScanNCut DX
  
  
  
  
  
  
  
  
  
  
  
  

Extended US Warranty: 1 year limited warranty on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

AllBrands Academy is SOLD OUT! Please fill out the wait list below

ABOUT OUR EVENT

AllBrands.com is excited to announce that we're coming to San Antonio to host our AllBrands Academy! Friday, August 23- Saturday, September 6th - 7th 2024 with doors opening at 9 AM and closing at 6 PM both days. Come join us at the AllBrands.com for two days of hands-on embroidery sewing and quilting in our interactive workshops and lectures. We have breakout rooms that will rotate throughout the event in a round-robin style. We've assembled our best and most popular and best educators in the business to instruct you. Come meet Embroidery Experts in person for some very unique tips and tricks to help you create your one-of-a-kind masterpiece. We will also have staff and educators to help with projects and answer any questions you might have about Brother Sewing Embroidery Cutting and Quilting Machines, and now the Newest B990 top of the line from Bernina.

Don't miss this exciting opportunity to spend two days of embroidery, education, and fun. Gain valuable knowledge and experience. Leave inspired with new unique techniques, projects, memories, and most of all, make new friends. You'll learn the secrets and tips to stitch like a pro. Learn how to use embroidery and quilting to transform everyday items into money-making projects with your hobby.

University Highlights

• Each Student will take home projects
  
• Embroider on the newest Embroidery Machines that are provided for you
  
• Cut on Brother ScanNCut
  
• Experience Brothers' newest Technology for 2025!
  
• Purchase machines and supplies at deep discounts for attendees
  
• One Student per machine
  
• 2 days of embroidery, sewing quilting education friendship and fun
  
• Multiple Classes per day in a Rotation
  
• Snacks and Lunch provided
  
• Vendor Mall for Retail Shopping on-site
  
• Test Drive top of line Embroidery Machines with Staff and Experts to help
  
• Plenty of staff to give one one-on-one help
  
• Give-a-ways and prizes
  
• Free Commemorative Event T-Shirt
  
  
  

  Attendees get this Commemorative T-Shirt!

  
  
  
  
  
  

  ---

  
  

  ---

  
  
  

Non-US Warranty: 30 days parts and labor.

ABOUT OUR EVENT

AllBrands.com is excited to announce that we're coming to Lafayette to host our AllBrands Academy! Friday, September 20 - Saturday, September 21, 2024 with doors opening at 9 AM and closing at 6 PM both days. Come join us at the AllBrands.com for two days of hands-on embroidery sewing and quilting in our interactive workshops and lectures. We have two breakout rooms that will rotate throughout the event in a round-robin style. We've assembled our best educators to instruct you. Come meet Courtney and Barbara Embroidery Sewing Quilting and Serger Experts in person for some very unique tips and tricks to help you create your very own one-of-a-kind masterpiece on your own personal machine to follow along. We will also have staff to help with projects and answer any questions you might have about the New for 2024 Bernina B990 Sewing Embroidery Quilting Machine, and the latest Bernina L890 Overlocker and coverhem machine.

Don't miss this exciting opportunity to spend two days of embroidery, education, and fun. Gain valuable knowledge and experience. Leave inspired with new unique techniques, projects, memories, and most of all, make new friends. You'll learn the secrets and tips to stitch like a pro. Learn how to use embroidery and quilting to transform everyday items into money-making projects with your hobby.

University Highlights

• Each Student will take home projects
  
• Quilt and Embroider on the newest B990 Embroidery Machines that are provided for you
  
• Serge and Coverhem on the Bernina L890
  
• Purchase machines and supplies at deep discounts for attendees
  
• One Student per machine
  
• 2 days of embroidery, sewing quilting crafting education friendship and fun
  
• Multiple Classes per day in a Rotation
  
• Snacks and Lunch provided
  
• Vendor Mall for Retail Shopping on-site
  
• Test Drive top of line Embroidery Machines with Staff and Experts to help
  
• Plenty of staff to give one one-on-one help
  
• Give-a-ways and prizes
  
  
  
  
  
  

  ---

  
  

  ---

  
  
  

Non-US Warranty: 30 days parts and labor.

ABOUT OUR EVENT

AllBrands.com is excited to announce that we're coming to Bossier City in the Shreveport ARK-LA-TEX region to host our AllBrands Academy! Friday, September 27 - Saturday, September 28, 2024 with doors opening at 9 AM and closing at 6 PM both days. Come join us at the AllBrands.com for two days of hands-on embroidery sewing and quilting in our interactive workshops and lectures. We have two breakout rooms that will rotate throughout the event in a round-robin style. We've assembled our best educators to instruct you. Come meet Courtney and Barbara Embroidery Sewing Quilting and Serger Experts in person for some very unique tips and tricks to help you create your very own one-of-a-kind masterpiece on your own personal machine to follow along. We will also have staff to help with projects and answer any questions you might have about the New for 2024 Bernina B990 Sewing Embroidery Quilting Machine, and the latest Bernina L890 Overlocker and coverhem machine.

Don't miss this exciting opportunity to spend two days of embroidery, education, and fun. Gain valuable knowledge and experience. Leave inspired with new unique techniques, projects, memories, and most of all, make new friends. You'll learn the secrets and tips to stitch like a pro. Learn how to use embroidery and quilting to transform everyday items into money-making projects with your hobby.

University Highlights

• Each Student will take home projects
  
• Quilt and Embroider on the newest B990 Embroidery Machines that are provided for you
  
• Serge and Coverhem on the Bernina L890
  
• Purchase machines and supplies at deep discounts for attendees
  
• One Student per machine
  
• 2 days of embroidery, sewing quilting crafting education friendship and fun
  
• Multiple Classes per day in a Rotation
  
• Snacks and Lunch provided
  
• Vendor Mall for Retail Shopping on-site
  
• Test Drive top of line Embroidery Machines with Staff and Experts to help
  
• Plenty of staff to give one one-on-one help
  
• Give-a-ways and prizes
  
  
  
  
  

  ---

  
  

  ---

  
  
  

Non-US Warranty: 30 days parts and labor.

• Temporary, re-positionable, fabric adhesive used to temporarily bond fabric. Odorless, colorless, no mist, does not gum sewing needles. Use for machine applique, quilting, basting, holding fabric to stabilizers in machine embroidery and hemming.
  
  
• A temporary adhesive excellent for use in embroidery because there will be no needle gum-up. Use for appliqué, adhering backing to garments, and positioning difficult-to-hoop items. 8.5 OZ. can. (THIS IS A "NO FLY" PRODUCT. ONLY AVAILABLE TO CONTINENTAL UNITED STATES)
  
  
• Protect work surface with disposable paper.
  
• Shake 505 Spray & Fix can before using.
  
• Hold can 12 in. / 30 cm. from fabric surface.
  
• Always spray 505 Spray& Fix on the wrong side of the smaller fabric piece to be glued.
  
• A light spray of 505 Spray& Fix is sufficient. A little goes a long way.
  
• Using your hand, press firmly in place to secure the piece to the larger fabric.
  
• A misaligned piece may be removed and repositioned several times for 15 to 20 minutes after spraying.
  
• Machine sew in place as usual.
  
• Cleanup with soap and water.
  
• Read label on can for storage, disposal, and first aid.
  
• Test on all fabrics before using.

Non-US Warranty: 30 days parts and labor.

Now with a brighter light, a longer and firmer arm, plus a newly designed light head. This small flexible light provides extra light without taking up any counterspace. It conveniently snaps into an adhesive bracket that can be mounted onto your sewing machine to provide pure white light for your detailed projects. Many other uses; reading, tool shop, etc. Up to 100,000 light hours, 90 lumens 120 volts. One mounting kit included. Extra Mounting Kit: #7996A

One of our Best Sellers! Light up your sewing area--just where you want it. Flexible neck enables you to shine white light where you need it the most-perfect for working on dark fabrics, in workshops, and craft areas. Plug-in light features an energy efficient LED light and on/off switch Attaches to the side of machine with an nonmagnetic adhesive bracket Purchase an extra bracket to mount to your serger Eight foot power cord and clips to hold the wire in place

Bendable Bright Light: This small flexible light provides extra light without taking up any counterspace. It conveniently snaps into an adhesive bracket that can be mounted onto you sewing machine to provide pure white light for your detailed projects. 100,000 light hours, 120 volts. One mounting kit included.

A small brilliant flexible LED light for spotlight illumination. Provides pure white lighting for those hard to see places. Light snaps into an adhesive bracket that can be mounted to the side of a sewing machine. Great for sewing machine, power tools, workshops, and craft areas. The quality metal flexible arm and metal light housing are very durable. No batteries needed. Energy efficient LED with 100,000 hours life of light. No bulb to replace. The LED Bendable Light makes a great reading light!

If you would rather have the protective master carton of 6 LED Bendable Bright Lights, you must enter a quantity of 6 going to one location, not 6 separate orders to one or more locations.

Puts off virtually no heat, unlike traditional sewing machine bulbs! This makes for working with invisible thread much easier, since some bulbs can melt the thread from the amount of heat that traditional bulbs put off. Not only does this sewing light illuminate the presser foot area as if you have a headlamp on your forehead, you can bend the light toward you and shine where you're seam ripping when needed. Quality built metal flexible arm and metal light housing.

• Brilliant flexible lighting for detailed projects
  
• Small, uses no counter space while easy to use
  
• Pure white lighting for those hard to see places
  
• Perfect for dark fabrics and matching seams
  
• Light snaps into an adhesive bracket, with cord clips
  
• Flexible arm provides 6 and 5/8" total reach
  
• Quality metal flexible arm and metal light housing
  
• 100,000 light hours 120 volts energy efficient LED
  
• 8 foot cord
  
• Comes with an adhesive bracket. Optional mounting kit is available separately.
  
• Great for power tools, workshops and craft areas
  
• Makes a fantastic gift
  
• Included mounting kit.
  
  
  
  
  See More Videos on Bendable Bright Light

Extended US Warranty: 90 Days labor on defects in materials and workmanship.

Non-US Warranty: 30 days parts and labor.

• Extra Small Monogramming Hoop (Three Position) For small embroidery in small places. Not only is this hoop a great size for monogramming as well as adding small designs to collars and cuffs as well as infant wear, the hoop unscrews for repositioning to change length and width. This is a must have for the home embroiderer.
  
  
• Fits the Brother PE100, PE150, PE170D, PE180D, PE190D & PE200 machines
  
  
• Also compatible with:
  Bernina Deco 500 and Deco 600
  Baby Lock EM1, EM2, and Accent
  Simplicity SE1, SE2, and SE3

Non-US Warranty: 30 days parts and labor.

The SA416 Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.

• Fits the Brother PE150, PE150V, PE200, PE170D & PE180D machines
  
  
• Also compatible with:
  Babylock EM1, EM2 and Accent
  Bernina Deco 500 and 600
  Simplicity SE1, SE2 and SE3
  White 3300

Non-US Warranty: 30 days parts and labor.

• Embroidery Hoops for a variety of applications
  
• Fits the Brother PE100, PE150V, PE170D, PE180D and PE200 machines
  
• Also compatible with:
  Babylock EM1, EM2 and Accent
  Bernina Deco 500 and 600
  Simplicity SE1, SE2 and SE3
  White 3300

Non-US Warranty: 30 days parts and labor.

Small Hoop Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.

• Fits Brother PC6500, PC8200, PC8500 and the PC8500D machines

Non-US Warranty: 30 days parts and labor.

300x130mm ( 11.8" x 5.1" ), Extra Large Three Stage Hoop for the PC8200, PC85oo, PC8500D and the PC6500. Create extra large designs without the need to reposition your fabric. The convenient repositioning feature allows you to move the hooped fabric to an additional overlapping section. Imagine combining several smaller designs to create a larger design with no need to rehoop. This hoop increases the area that you may embroider in one hooping to approximately 5" X 12" Make it even easier with our PE Design Embroidery Software! Many versions of PE design allow you to combine designs on your PC.

• Fits Brother PC8200, PC8500, PC8500D & PC6500 machines

Non-US Warranty: 30 days parts and labor.

• Fits Brother ULT2001, ULT2002D and ULT2003D machines
  
• Also compatible with Babylock Ellageo, Ellageo 2 and Ellageo 3

Non-US Warranty: 30 days parts and labor.

• Embroidery Hoops for a variety of applications
  
• For Brother ULT2001, ULT2002D and ULT2003D machines
  
• Also compatible with Babylock Ellageo, Ellageo 2 and Ellageo 3
  
  Please note: Hoop is not compatible with newer Babylock Elageo machines

Non-US Warranty: 30 days parts and labor.

Medium Plus 5" x 7" Hoop for the ULT Embroidery Hoops for a variety of applications. Size: 7" X 5"

• Fits the Brother ULT2001, ULT2002D & ULT2003D machines
  
• Also compatible with Babylock Ellageo, Ellageo 2 and Ellageo 3
  
  
  
  

Non-US Warranty: 30 days parts and labor.

Small Monogramming Hoop or small motif hoop (Sewing area: 1½"h X 2"w). For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.

For Use With: HE-120, HE-240, Innov-ís 500D, Innov-ís 900D, PE-270D, PE-300S, PE-400D, SE-270D, SE-350

Non-US Warranty: 30 days parts and labor.

• Regular 100mm x 100mm ( 4" x 4" )
  
• Fits Brother 270D, 500D, PE400D and PE300S machines

Non-US Warranty: 30 days parts and labor.

100x172mm requires splitting the design or lettering in software so that moving the hoop to the next position will line up the additional lettering or design with what has already been sewn out. For SE400 SE425 PE500 LB6800 ---- SE270D SE350 SE400 PE-300S PE-400D PE500 HE-120 HE-240 LB-6770 LB-6800PRW 500D 900D 950D SB7050E

Super Hoop (Two Stage) Save time and work! Create extra large designs without the need to reposition your fabric. The convenient repositioning feature allows you to move the hooped fabric to an additional overlapping section. Imagine combining several small designs to create a larger design with no need to rehoop. This hoop increases the area that you may embroider in one hooping from 100mm X 100mm to 4” x 6 ¾” (100x172). Make it even easier with our PE Design Embroidery Software! Many versions of PE design allow you to combine designs on your PC.

* Combine several small designs to create a larger design. No need to rehoop
* Clear grid notched for accurate placement of embroidery designs
* Markings on hoop for easy reference
* 100mm X 100mm (sewing field size) to 100 x 160mm (split designs)

• For the Brother SE350, SE400, LB6770, LB6800, PE400D, PE500D, NV900D, NV950D, SE-270D, and Babylock Intrigue and Sophia sewing embroidery machines.

Non-US Warranty: 30 days parts and labor.

for Brother Quattro NV6750, NV6700, NV6000, Babylock Ellisimo BLSO, VM6200, VM5100, VE2200, NV5000 Gold, NV4750 BLG3, NV4500 BLG2, NV4000 BLG, NV2800 BLL2, 2500 BLL, 1500 BLN, NQ1400, NQ3500.

Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.

For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro™6000D – New!, Innov-ís 2800D – New!

• Works With for Innov-is NV 4500D, 4000D, 2500D, 1500D Machines and Ellegante 2
  Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.
  
  
• 1" x 2.5"

Non-US Warranty: 30 days parts and labor.

for Brother Dream XV8550, XV8500, Babylock Destiny, Quattro NV6750D NV6700D NV6000D, Babylock Ellisimo BLSO, VM6200D VE2200, NV5000D Gold, NV4750D, NV4500D BLG2, NV4000D BLG, NV2800D BLL2, NV2500D BLL, NV1500D BLN, NQ3500, NQ1400E, and comparable Babylock models.

Medium Embroidery Hoop for 4000D, 2500D, 1500D (4" x 4") Embroidery Hoops for a variety of applications.

For Use With: Innov-ís 2500D, Innov-ís 1500D, Innov-ís 4000D, Duetta® 4500D, Quattro™6000D – New!, Innov-ís 2800D – New!

Brother Embroidery Machines:
BP2100
Duetta 4500D/4700D/4750D
Quattro 6000D/Quattro 2 6700D
Quattro 3 Trilogy Limited Edition Innov-ís 6750D
DreamCreator XE VM5100
Dream Machine XV8500D/XV8550D
Dream Maker XE VE2200
Dream Weaver XE VM6200D
Innovis 1500/1500D/2500/2800D
Innovis 4000D/5000/5000D/XV8500D
Innovis I / Ie / V3 / V5 / V7
Innovis NQ1400E/NQ1600E/NQ3500D
Luminaire Innov-ís XP1
Baby Lock Embroidery Machines:
Aventura BLMAV, Aventura II BLMAV2
Destiny BLDY, BLDY2
Ellegante BLG/BLG2/BLG3
Ellageo Plus BLL/BLL2
Ellisimo BLSO
Ellisimo BLSOG/BLSOG2/BLSOG-NZ
Esante BLN
Flourish BLMFO, Flourish 2 BLMFO2
Journey BLJY
Solaris
Spirit BLPY
Unity BLTY

Non-US Warranty: 30 days parts and labor.

*for Brother NV6750D, NV6700D, NV6000D, Babylock Ellisimo ELSO, Dream VM6200, VM5100, VM2200, NV5000 Gold, NV4750 BLG3, NV4500 BLG2, NV4000 BLG, NV2800 BLL2, NV2500D BLL, and NV1500D BLN Babylock Embroidery Machines. And newer models.

• This large embroidery frame is designed to fit the following models: Brother Innovis 4000D and Brother Innovis 4000 and Ellegante 2 and Brother 6000D and Babylock Ellisimo
  
  *PLEASE NOTE: This cap frame insert is not currently compatible with the following machines:
  
• Baby Lock Aventura II and Flourish II
  
• Brother NQ1600E and NQ3600
  If you have one of these machines listed, please do not purchase this product. Using this product on the listed machines can/will damage the machine.

Non-US Warranty: 30 days parts and labor.

• XLarge Embroidery Frame 12" X 7" For Innovis 4000/4000D And The Ellegante 2, Duetta NV4500D,
  
  
  
  Extra Large Hoop for the Innovis 4000D Save time and work! Create extra large designs without the need to reposition your fabric. The convenient repositioning feature allows you to move the hooped fabric to an additional overlapping section. Imagine combining several smaller designs to create a larger design with no need to rehoop. This hoop increases the area that you may embroider in one hooping to 12" X 7" Make it even easier with our PE Design Embroidery Software! Many versions of PE design allow you to combine designs on your PC.
  
  XLarge Embroidery Frame 12" X 7" For Innovis 4000 Duetta 4500D And The Ellegante 2 Extra Large Hoop for the Innovis 4000D Save time and work! Create extra large designs without the need to reposition your fabric. The convenient repositioning feature allows you to move the hooped fabric to an additional overlapping section. Imagine combining several smaller designs to create a larger design with no need to rehoop. This hoop increases the area that you may embroider in one hooping to 12" X 7" Make it even easier with our PE Design Embroidery Software!

Non-US Warranty: 30 days parts and labor.

The Extra Large Embroidery Hoop SA441 has a maximum embroidery area of 10.5" X 6.25". This is the hoop to use for those larger designs. This Hoop can be used with a NV4000D and 4500D, however we recommend that you update this model to version 2.02 or later. This update insures that you will not embroider outside the embroidery area of this hoop.

For Use With: Innov-ís 1500D, Innov-ís 2500D, NV2800D, Innov-ís 4000D, NV4500D, Babylock Ellegante & 2,

• 10 1/4" x 6 1/4" Hoop
  
• Embroidering Area: 6” x 10”(160 x 260 mm)
  
• One template grid is included.

Non-US Warranty: 30 days parts and labor.

Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.

• for Brother PC6500 8200 8500 PE700 PE750 PE770 PE780 NV1000 NV1200 Babylock Esante Ellure Emore
  Babylock Ellure BLR ESL Plus BLR2 ESE Emore.
  
  Genuine Brother Embroidery Hoop.
  
  Product Description:
  Small Monogramming Hoop or small motif hoop. For small embroidery in small places. This hoop is a great size for monograms as well as adding small designs to collars and cuffs as well as infant wear. This is a must have for the home embroiderer.
  
  This hoop fits the following embroidery machines:
  Brother brand embroidery machines:
  
• Brother 6500, 8200, 8500, 8500D
  
• Innovis PE700, PE700II, PE750D, PE770, NV1000, PE1200, 1250D
  
  Baby Lock brand embroidery machines:
  
• Esante 1 (ESE), Esante 2 (ESE2), Ellure (ESL)
  
• New Ellure (BLR) , New Ellure Plus (BLR2) (BLR3)

Non-US Warranty: 30 days parts and labor.

Same as Babylock EF83 or EH443, and replaces Brother SA422

• Regular 100mm x 100mm ( 4" x 4" )
  
• Compatible with Brother PC6500 8200 8500 PE700 PE750 PE770 PE780 NV1000 NV1200, Babylock Esante, Ellure, Emore
  
  
  
  Fits the following machines:
  
• NV1200
  
• NV1000
  
• PE750
  
• PE700
  
  
• Also works with the following Babylock machines:Emore
  
• Ellure(BLR)
  
• Ellure(ESL)
  
• Ellure Plus(BLR2) (BLR3)
  
• Esante1(ESE)
  
• Esante 2 (ESE2)
  
  Product Description:
  SA443 Medium Embroidery Hoop has an embroidery area of 100mm X 100mm (approx. 4" X 4") is the size hoop to use for most embroidery patterns.
  
  This hoop fits the following embroidery machines:
  Brother brand embroidery machines:
  Brother 6500, 8200, 8500, 8500D
  Innovis PE700, PE700II, PE750D, PE770, NV1000, PE1200, 1250D
  
  Baby Lock brand embroidery machines:
  Esante 1 (ESE), Esante 2 (ESE2), Ellure (ESL)
  New Ellure (BLR) , New Ellure Plus (BLR2) (BLR3)

Non-US Warranty: 30 days parts and labor.

Use this size hoop for larger single designs or combine designs and lettering with the machine edit feature. Adjustment screw for securing a wide variety of fabric thicknesses in the hoop. Clear grid notched for accurate placement of embroidery designs. Markings on hoop for easy reference.

For Use With: Innov-ís 1000, PE-700, PE-750D, PE-700II, PE770, PE-780D

• Embroidery Hoops for a variety of applications
  
• Also Fits the older Brother PC6500, PC8200 & PC8500 machines

Non-US Warranty: 30 days parts and labor.

• The SA445 Extra Large Hoop is a multi=position hoop that allows you to embroider in an area 300mm X 130mm (approx. 5" X 12") without re-hooping your fabric and repositioning the hoop in progressive sections.
  
  
• Repositionable hoop for larger embroidery design creations. 3 pegs for repositioning the hoop in progressive sections to expand the embroidery area without re-hooping. Clear grid notched for accurate placement of embroidery designs. Markings on hoop for easy reference.
  
  
• For Use With: Innov-ís 1000, PE-700, Innov-ís 1200, PE-750D, PE-700II, PE770, Innov-ís 1250D, PE-780D
  
  
• for Brother PC6500 8200 8500 PE700 PE750 PE770 PE780 PE800 NV1000 1200 1250 NS1150 NS2750 SB8000 SE1800 SE1900 Babylock Esante Ellure Emore
  
  Brother PE-770 large hoop use Vince J. Arcuri, Published on Oct 5, 2012. I am using the brother pe 770 largest hoop, 5 by 12 to set up large lettering.
  

Non-US Warranty: 30 days parts and labor.

Hooping has never been so easy with Brother 4” x 7” Magnetic Hoop. Whether you are using 4” x 4” designs and adding text or creating something custom on your machine this hoop has what it takes. Easily slide magnets into place securing your material without residual hoop marks.

• For Use With 5" x 7" embroidery field Brother Machines
  
• Flat Magnet Frame Non-sliding with 6 magnets included

Non-US Warranty: 30 days parts and labor.

•Light weight water soluble stabilizer provides stable surface while embroidering and/or can be used as a topper
•Washes away with warm water
•Clear color makes this stabilizer perfect for lace ornaments

Non-US Warranty: 30 days parts and labor.

• The ultimate washaway adhesive-backed stabilizer.
  
  
• Excellent for adhering to fabrics with excessive stretch, such as Lycra or spandex
  
  
• Great for embroidery backing
  
  
• Helps to minimize movement of the face fabric during embroidery
  
  
• A great tool for hard-to-hoop or small embroidery projects
  
  
• Completely removable when submerged in warm water or through a gentle wash cycle
  
  15" x 6 Yards (38.1cm x 5.49m)
  
  Brother Lightweight Adhesive Stabilizer, How To: Embroidering a Baby Bodysuit by Angela Wolf

Non-US Warranty: 30 days parts and labor.

• This Bobbin thread designed to work with the Brother Machines with bigger than a 4X4 Design area. Made in Japan by Ozeki or Fujix.
  
  
• The 1,100-meter (approx. 1,200yds) filament thread is best suited for the Innov-is 6000D, 4500d, 4000D, 2800D, 2500D, 1500D, 1250D, 1200 series, PC, ULT series machines and the PE-400D and Innov-is 500D. Also can be used in comparable Baby Lock Embroidery Machine models.

Non-US Warranty: 30 days parts and labor.

• This Bobbin thread designed to work with the Brother Machines with bigger than a 4X4 Design area. Made in Japan by Ozeki or Fujix.
  
  
• The 1,100-meter (approx. 1,200yds) filament thread is best suited for the Innov-is 6000D, 4500d, 4000D, 2800D, 2500D, 1500D, 1250D, 1200 series, PC, ULT series machines and the PE-400D and Innov-is 500D. Also can be used in comparable Baby Lock Embroidery Machine models.

Non-US Warranty: 30 days parts and labor.

Packed with Professional features, this case is high class, durable and comfortable to carry!

This stylish tool case is ideal for computer and copier repair technicians, electricians, photographers and all professionals who depend on their tools for a living. This Clarke tool box is constructed from black anodized aluminum. The outside dimensions are 18.75" x 14.25" x 6.5" and weighs 8.5 lbs. The inside dimensions are 17" x 12". It has reinforced corners, key lock latches, 2 internal tool pouches, adjustable dividers and a shoulder carry strap.

Non-US Warranty: 30 days parts and labor.

With Reinforced Corners and Two Internal Pouches. Adjustable Dividers and a Shoulder Carrying Strap. This case is durable and stylish!

This stylish tool case is ideal for computer and copier repair technicians, electricians, photographers and all professionals who depend on their tools for a living. This Clarke tool box is constructed from silver anodized aluminum. The outside dimensions are 18.75" x 14.25" x 6.5" and weighs 8.5 lbs. The inside dimensions are 17" x 12". It has reinforced corners, key lock latches, 2 internal tool pouches, adjustable dividers and a shoulder carry strap.

Non-US Warranty: 30 days parts and labor.

This iron is perfect for small corners, little pieces of fabric or small projects where a large iron is too bulky.

• Perfect for pressing "Quick Bias" in stained glass quilting, appliqueing, pressing seams, paper crafting, and many other sewing and quilting projects
  
• Easy to use on even the smallest details
  
• Heats up to operational temperatures in less than 10 minutes.
  
• Lightweight body only weighs 2.5 oz.
  
• Long 8 foot electric cord.
  
• Easy-glide sole plate.
  
• Multiple temperature control settings.
  
• On/Off switch built into cord.
  
• Mini Iron® stand included.

Non-US Warranty: 30 days parts and labor.

Use the Octi-HOOPS and enjoy Free-Motion Embroidery and Quilting Pain Free!
Clare Rowley, Inventor of the Creative Feet and Octi-HOOPS has your health in mind when she creates all of her products.

The Octi-Hoops are so easy to use, children as young as 3 have embroidered and our youngest quilter is only 8! When Free Motion techniques are as easy as coloring, everyone has the ability to create amazing quilts and embroidery projects with any sewing machine that can do free-motion! Click here to view machines that cannot do Free-Motion. View our Dragonfly Embroidery Video online and others below to learn why so many sewing enthusiasts are so happy with their Octi-Hoops!

Octi-Hoops Free Motion Embroidery - Introduction.

Non-US Warranty: 30 days parts and labor.

What makes Stipple different?

Now it is so easy to quilt – every step of the way – with your embroidery machine. Stipple! Quilt Blocks incorporate bold, embroidered appliqué shapes with gorgeous stippling. Just fuse your quilt sandwich, hoop and stitch. Complete your quilt with our Reversible Piecing Technique (included on every Stipple! CD) and you’ll be done in no time!

Contents:

• Eileen’s Reversible Piecing Technique
  
• Step-by-Step instructions for making ONE 46 ½” x 58 ½” quilt (Ho...Ho...Holiday Quilt featured on packaging)
  
• 8 Embroidery files in two sizes

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

I'm excited to announce the release of the latest Stipple! Collection-Stipple! Seashells.

Having the beach for a backyard is a childhood memory I will never forget. Collecting seashells, walking barefoot in the sand and watching the waves crash are just a few of my favorite memories. That's where I drew my inspiration from when designing Stipple! Seashells.

Whether you live in Texas-(like I do now!), on the east coast or west coast, you can enjoy the treasures of the sea with Stipple! Seashells. I've designed Stipple! Seashells with several goals in mind.

If you're like me-you don't always have time to stitch a quilt-and designing one can be a daunting task. That's why you'll love Stipple! Seashells. It's fast, easy and produces flawless results. Quilt block sandwiches are easily embroidered, appliquéd and quilted in just a few easy steps. Just fuse your quilt sandwich, hoop and stitch. Complete your quilt with our Reversible Piecing Technique (included on every Stipple! CD) and you'll be done in no time! Plus it's easy to design your own quilt or follow the step-by-step instructions for making the two quilts featured on the packaging.

Let the quilt reflect your personality! Select batiks, solid or printed fabrics-have fun with fabric color selection or let your creativity shine by adding crystal embellishments. The possibilities are endless!

And you'll enjoy a new technique - continuous applique! The wave border looks really complicated but it's not! It's just one strip of applique fabric - you'll be surfing that wave in no time!

9 embroidery designs in two sizes

• 8 embroidery designs for the 160mm x 230mm hoop (6x9")
  
• 6 embroidery designs for the 130mm x 180mm hoop (5x7")

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

from Designs in Machine Embroidery, Machine-Embroidered Wraps and Cozy Cover-Ups. In this 64 page book, Joanne Banko shares tips and techniques for adding designs to a variety of styles of wraps.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Nothing compares to the precise and uniform stitches you can get from an embroidery machine. And now you can have that same quality of stitch when you quilt your quilts. In Quilt with an Embroidery Machine in 8 Easy Lessons, machine embroidery expert Eileen Roche walks you through the steps to making great quilts with your embroidery machine. Learn Eileen's patented technique for quilting and appliqueing as you go, then learn how to add custom quilting and allover quilting to your quilts and how to finish them beautifully.

In addition to the eight lessons, you'll learn to create six projects including fun and easy table runners, a patriotic pillow, and a child’s play mat.

Plus this 90 page book includes all the machine embroidery files you need to create the projects. And Eileen shares her personal tips for getting the quilts done and done fast.

Gather your supplies, prepare your quilt tops, and then get quilting with your embroidery machine!

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Eileen Roche’s new 68 page full-color book is an invaluable educational resource for machine embroiderers. The book guides readers through the steps to create a 72” x 80” quilt and a 12 ½” x 40” table runner.

Readers will learn:

How to create complex design layouts without fuss!
How to use templates for placement.
Layering techniques with applique fabric.
Methods for creating pre-cut applique fabrics.
Multiple approaches to quilting large scale quilts on an embroidery machine.
The 68 page full-color book includes:

44 Embroidery designs
17 Pre-Cut Designs
PDF Templates & Block Diagrams
Once you understand Eileen’s method for making a quilt block, you can easily adapt the quilt blocks to make your own creations.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Go from blank to beautiful! Designs in Machine Embroidery has partnered with the talented Joanne Banko to bring you Just Jackets. You can customize your applique with embroidery thread, KingStar metallic thread, applique fabrics, and more!

You'll find large medallions for jacket backs, medium size motifs for yokes and sleeves plus small charm designs for cuffs, collars, and more. Instructions included for making large medallions in small hoops!

There's something for every embroiderer in Just Jackets by Joanne Banko. Includes 3 unique collections; The Folk Art Collection, The Rose Collection, and The Star Collection.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Patches and Applique Maker
Stitch your own patches and appliques!

Create your own patches and applique with this software. It's simple and easy with only a few clicks!

Over 1800 applique and patch designs to choose from
Select from over 1000 accent charms
Personalize with 49 unique applique outlines

Customize your designs with text and color.

Includes 27 fonts!

4 Utility fonts
4 Micro fonts
5 Monogram fonts
10 Applique fonts
Make beautiful borders for your designs.

Traditional satin
Blanket stitch
Motif outlines
Special symbols

Non-US Warranty: 30 days parts and labor.

Cut 'N Stitch marries embroidery with digital cutting for fabric, heat transfer vinyl, and rhinestones.

Mixing fabric, HTV, and bling with embroidery has never been easier! This software saves in all popular embroidery and digital cutting formats.

You will receive via download:

Cut 'N Stitch Software


Embroidery Features:
Run Stitch
Applique
Applique Fill Patterns
Trapping Stitch for HTV
Two Fonts
True Type Fonts for HTV and Embroidery
Envelopes
Text on Path
Placement Guides

Specialty Features:
Bling Stroke
Bling Fill
Bling Single Set
Bling Export
Outer Ring Styles
Fill Patterns
Shaping Features:
Trim
Weld
Intersect
Subtract
Exclude
Knockout
Morph
Artwork on Path

Artwork
2000+ Artwork Files
Drawing Tools
Edit Artwork Ability
Load Backdrop

Non-US Warranty: 30 days parts and labor.

*for 4x4" Hoops, Full Color Instruction Booklet, Monogram the quick & easy way! You lose sleep over the perfect placement of a monogram on your shirt. You deliberate over the right size for a monogram on napkins. You long for a better approach to determining where and how to use your favorite monogram designs.

The Perfect Placement Kit by Designs in Machine Embroidery is the answer to all your monogramming needs.

The PPK is a complete package that will show you how to accurately place monograms on bath towels, hand towels, napkins, shirts, cuffs and more.

• 15 Perfect Placement Plastic Templates for linens and wearables
  
• 30 Pressure Sensitive Adhesive Miniature Crosshairs
  
• 6 Pressure Sensitive Adhesive Test placement guides
  
• The Mini Ruler: a translucent, flexible ruler that fits in any 4" x 4" hoop. The ruler includes both English and metric measurements for easy embroidery design calculations.
  
• 20 page, full color Perfect Placement Guide illustrates how to use each template for Perfect Placement Every Time!
  
• Sizes are Ladies & Men's: Small-2X or larger
  
  Ever feel overwhelmed by what should be a simple embroidery task? Stitching one...two... a dozen or 100 embroidery blanks like towels, t-shirts, shirt cuffs or napkins can be a daunting task without the right tools.
  
  Designs in Machine Embroidery has a smart solution! The Perfect Placement Kit includes 15 reusable plastic templates for the most common blank items you want to embroider. Simply place a target sticker in the designated spot according to the template and you're just a stitch away from embroidery success! No more guesswork or tedious measuring is required.
  
  Benefits of using the Perfect Placement Kit:
  
  Precisely position designs on napkins, towels, shirt cuffs, left chest and more
  Make exact duplicates with ease
  Flawless precision monogramming
  No measuring required
  Great for embroiderers—from beginners to pros
  Professional results with minimal effort
  No more guesswork, rework or hassle
  Includes ruler in both English and metric measurements for easy embroidery design calculations
  
  

Non-US Warranty: 30 days parts and labor.

Periodically, there's a product that is as great as the invention of sliced bread. Sure, anyone can slice their own loaf of bread, but it sure is more convenient when the bread is already sliced for you!

That's how we feel about the new Print & Stick Target Paper! Translucent and sticky makes working with these templates less tricky!

As an embroiderer, you're accustomed to working with traditional paper templates. You print a template of your embroidery design on plain copy paper. Sure, it will help as you position and plan your embroidery layout. But the paper can slide—the scotch tape you use to attach the template to your project wears out and the template is a little awkward to work with. Or you may be more advanced and use tracing paper for your templates. But it's a little tricky to run tracing paper through a printer or copy machine. It's also very delicate to work with and it's not adhesive backed!

But when you use the new Print & Stick Target Paper you'll immediately see the difference!

It's translucent! This means you can see your fabric and embroidery through the template. What a difference this can make when you're trying to align your embroidery design layout!

It's adhesive! Having the ability to adhere the entire template on your project helps ensure accuracy! I've used scotch tape in the past, but one way or another, the template shifts and my carefully planned embroidery layout is ruined! Print & Stick Target Paper is adhesive backed and lasts for multiple uses!

Adhesive templates stay put until you're ready to stitch!

Non-US Warranty: 30 days parts and labor.

We're proud to announce that our long-anticipated update to the Embrilliance platform is now available FREE for all users on our downloads page.

Merg, Size, Colorize, Format Conversion, Lettering, Monogramming, Undo, Save, Overlap, 12 Alphabet Fonts, for Macintosh and Windows Computers.

*With Embrilliance Essentials you can type in BX format fonts for embroidery files and for graphics. Embroidery Essentials is the only software that you do not have to merge letter by letter. Embrilliance Essentials works with your embroidery machine or Scan N Cut.

*3 Extras, Creative DRAWings My Stitch Editor and Sizer Embroidery Software, Wilcom TrueSizer Format Conversion Software Free Downloads, Brother iBroidery.com Free Designs, plus Designs in Machine Embroidery Magazine Offer.


Embrilliance is the only brand in the World that offers embroidery software running native on Mac with OSX, Windows XP 32-bit, Windows Vista 32/64, Windows 7 32/64 (faster)

Please click HERE to view the 12 Fonts Included

Every embroiderer needs to do some basic things. Those things should be easy and fun, not an hour long trip to the dealer for a class. And it shouldn’t cost an arm and a leg, either. And just because your computer is a Mac with OSX or a PC with Windows 7 64 doesn’t mean you should be left out! Embroidery software should be easy, fun and useful for everybody.

A couple years ago, someone told us what they like to use in their software. And then we heard the same thing from someone else. And it occurred to us that there are some things which are, “Essential to every embroiderer.” Yet many software programs have everything and the kitchen sink too, and they charge you for it. So we put just those things in one simple, inexpensive program, and called it, “Essentials.”

What are these “Essentials?”

Using your Mac or Windows PC you can:
•Merge embroidery designs in almost any format, even while they are in .ZIPs.
•Resize, with stitch recalculation.
•Colorize.
•Convert Thread Brands on your designs.
•Add lettering in Multi-Line, Monogram and Circle modes. You can even spiral text or make really LARGE letters.
•Save in your machine’s format.
•Save working files so that you can edit text later.
•Overlap designs and have significant understitching removed.
•Run a simulator to show how your designs will sew out.
•Group/ Ungroup
•Change or remove individual colors in a design.
•Have many chances to Undo your work.
•There are special, self-modifying designs that can be used, and some come with the program. These designs calculate their stitches as you play with them for super results!
•Intel Mac OSX 10.5 (Leopard) and later
•Windows XP 32-bit, Windows Vista 32/64, Windows 7 32/64
•Embrilliance is the only brand in the World that offers embroidery software running native on Mac and Windows 32 and Windows 64 (so it’s faster)!

Wondering if it works with files for your machine? Yes it does!

Essentials can read:
.ART, .ART42, .ART50, .ART60, .CND, .CSD, .DST, .DSZ, .EMB, .EMD, .EXP, .EXP+, .HUS, .JAN, .JEF, .JEF+, .PCS, .PCM, .PES, .PHB, .PHC, .PHD, .SEW, .SHV, .TAP, .VIP, .VP3, .XXX

Essentials can write:
.CSD, .DST, .DSZ, .EXP, .EXP+, .HUS, .JEF, .PCS, .PCM, .PES, .SEW, .SHV, .TAP, .VIP, .VP3, .XXX

And it also includes special features to enable Mac users to write USB devices and floppy disks for use with embroidery machines.

Serial Number can be found inside the cover.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

We're proud to announce that our long-anticipated update to the Embrilliance platform is now available FREE for all users on our downloads page.

Looking for more fonts to use as Monograms or Lettering in Embrilliance Essentials? Look no more! This is Font Collection 1 for Essentials. That’s 15 beautiful fonts in collection 1. But don’t worry, Collection 2 is coming also!

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

If you are like most of us, you’ve purchased and downloaded more than a few alphabet designs. They are gorgeous to look at once embroidered, but difficult to layout properly. If a letter is to be repeated, say as in “Bobby” then the copy and paste can leave you feeling drained. Worse, if you do it in the wrong sequence, then your machine winds up jumping here, there and everywhere.

And even if you do get all the letters in, and in the proper order, then there’s the issue of aligning them so they look right. And what if you need to nudge the size down a hair? Aaargh! Now you start all over again by going through a sizing program.

Can’t one simple thing make this problem easy? Yes! AlphaTricks solves all those issues and makes using your alphabet designs fun!

AlphaTricks is a letter-lovers dream. Of course, you can run AlphaTricks by itself without owning Essentials. Once you do, we just know you’ll want the Essentials though, as the two together make a great experience. But if you only need AlphaTricks, don’t worry, because it does run without any other titles added.

Like all our products running in the Embrilliance Platform, you get OSX and Windows versions. Your license lets you run it on as many computers as you own — even mix and match Mac and Windows. No dongle required. No limits to the number of installs. And as you add products, just add the serial number to the program, and all the features are there in one program, easy to use. The platform supports the latest versions of Windows and OSX.

Note: AlphaTricks does not come with fonts — it enables you to use the alphabet designs you’ve purchased elsewhere.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Welcome, Enthusiast!
Once you have mastered the Essentials, you might be ready to play a little bit more, explore more advanced functions, and take on a little more challenge. If this is you, you might be an enthusiast. We named this program after you!

Check out these features:

• Stitch editing
  
• Multiple hooping
  
• Baste Hoop
  
• Precise Position
  
• Mirror X 4
  
• Instant repeat
  
• Carousel
  
• Scatter
  
• Advanced Thread editor
  
• Advanced Sizing controls (when combined with other titles)
  
• Advanced Stitch properties
  
• Save .PNG Image
  
• Runs without Essentials, but when combined, a lot of easy-to-use fun can be found!
  Like all our products running in the Embrilliance Platform, you get OSX and Windows versions. Your license lets you run it on as many computers as you own — even mix and match Mac and Windows. No dongle required. No limits to the number of installs. And as you add products, just add the serial number to the program, and all the features are there in one program, easy to use.
  
  Spiderweb embroidery design
  Work smarter, not harder. That is what the Embrilliance software programs are all about. How to create what you want as quickly and easily as possible.
  
  Enthusiast has some wonderful automated features for working with existing stitch files – such as instant repeat, mirror x4, and scatter. This project was created in StitchArtist using the carousel feature of Enthusiast. When you think about your project plan, its nice to be able to break down the project at hand into small mini projects that take advantage of shortcuts such as the carousel feature.
  
  Similar to a snowflake, the spiderweb base begins as a uniform circular repeat of a “wedge type design”. Its always easier to customize and edit, so we take the very uniform computer generated result and give is some personality and character by reshaping some of the “webs”.
  
  In this short video, you will learn about the carousel feature in Enthusiast as well as the automatic optimizing features in StitchArtist.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

Welcome to The Density Repair Kit (DRK), the most sophisticated density adjustment, analysis and repair tool available for the embroiderer!

DRK does the following:

• Removes hidden stitches from within a design so that it will sew thinner, cleaner, and with less thread (and needle) breakage.

• De-Clumps design areas. These are areas that are over-sewn repeatedly with the same color.

• Filters small stitches from your designs that would otherwise create thread build-ups and jam the machine.

• Reduce the density in designs that were shrunk to fit a hoop.

• Increase the density of designs for better coverage.

• View the density of designs to see how they’ll sew before expending time and thread on a trial.

• Limits the density of your designs based on the fabric and thread that you are using.

• Informs you of how best to embroider the project or fabric that you are working on. It recommends stabilization, hooping technique, needle type and size, and thread weight to help your project succeed.

• Saves you time and money. Reduced stitch counts save enormous amounts of time and thread usage. Proper density adjustments allow projects to complete successfully. With DRK, project time and thread savings of 15%-30% are common!

• Runs with or without Essentials, because it’s so cool, everyone ought to have it!

• Like all our products running in the Embrilliance Platform, you get OSX and Windows versions. Your license lets you run it on as many computers as you own — even mix and match Mac and Windows. No dongle required. No limits to the number of installs. And as you add products, just add the serial number to the program, and all the features are there in one program, easy to use.

Density Repair Kit is so unique it has four patents!

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

We special order each Stitch Artist software whenever a customer orders based on the level they order. Once the order is placed, it should only be about a week or so.

StitchArtist is a program to create machine embroidery designs from scratch. You start using existing artwork or by ‘drawing with stitches.’ You control the shapes, set the stitch type and properties, and StitchArtist generates stitches for you. When you want to create stitches, that’s what it does.

StitchArtist is a journey many years in the making, and has been designed for ease-of-use and digitizing education. The process of design creation, commonly called ‘digitizing’, requires a skilled person using a specialized tool. StitchArtist is that tool, but it is designed to take the difficulty out of the software, leaving the user to concentrate on their designs.

In a radical departure from the typical digitizing interface, StitchArtist uses a single mode to draw, set stitches, size, edit, rotate, sequence and set properties of design objects. It is easy and intuitive once you know the very basics

StitchArtist comes in levels which suit different skill levels:

Level 1
Level 1 is designed for a hobby embroiderer who needs to be able to create stitches without going into debt or spending much computer time. Level 1 offers a limited set of stitch types and, more importantly, properties for those stitches, so that the user can simply ‘create’ without needing to learn many steps. Typical projects for Level 1 are applique designs, running stitch designs and simple filled shapes, backgrounds or unifying elements for design compositions etc.

Level 2
Level 2 includes Level 1 and is designed for production and skills training for those who would like to create more sophisticated designs (logos), as well as a more complete set of tools. It will allow the user to learn a wide cross-section of stitch types and properties, and have enough freedom to create virtually any design. If you are looking to use satins to their fullest extent, this is where you need to look. You can also import .SVG art and some cutting file formats (.FCM and .studio) for cross-purpose use.

Level 3
Level 3 includes Level 1 and Level 2 and is designed for someone who either loves to create designs or works commercially in the embroidery field. This level includes advanced items such as Styles, QuickStyles, an Eyelet tool, Carving lines, graphical operators such as Cut, AND, Union, Flatten, Inflate/Deflate, Re-construct and Break. It also allows for the content within the product to be expanded by publishing Motifs and Embossed effects. Additional controls are available to work how you like. The properties for each stitch type are fully revealed, and operations for vector support, including export, are added; now you can draw .svg and cutting machine designs directly. There’s even a tool to automatically outline existing design stitches.

Tell me more…
StitchArtist is not a photo-to-stitch tool, nor is it an autodigitizing program. The results of those are very subjective, and there are plenty of tools to do those in the market. When we find a process that is good enough for us, we’ll produce it. Meantime, straightforward design creation is the focus of this product. If you want to make designs for hobby, cottage industry or professional use, this is for you. If you really want to learn to digitize, this program has been designed for simplicity and instruction from the ground-up.

It is not a customizing tool (used to manipulate existing designs.) It does not contain Essentials or Enthusiast, although it does run within the Embrilliance Platform so the user interface is consistent. You can purchase StitchArtist by itself if desired; it does not rely on any other purchased product, nor is it an upgrade of any other product.







How to use Envelopes in Embrilliance

With the recent gold release of the 1.161 update, all Embrilliance Platform programs gained text-formatting superpowers! As part of this incredible update, users of all platform programs who update to version 1.161 now have the ability to use Envelopes. These specially-formatted shapes which can be created in any level of StitchArtist software can warp and arrange text to create incredible decorative effects.




Step 1. Install the Envelopes 1 Library
First, make sure that you are running the latest version (1.161+) by clicking About in the Help menu. Check for the version under the yellow needle icon in the resulting window.


*Note: If you running a version previous to the latest 1.161, Envelopes will not function.

Step 2: Select an Envelope Design
Once you have the library installed, create a new design page in your Embrilliance Platform program by clicking New Page under the File menu. With your new page created, click the Merge Design button on your toolbar to open your libraries. In the Catalog drop down menu at the upper left of the Library window, you will find a category titled Embrilliance: Envelopes. Select this category and the banners, ribbons, and shapes of Envelopes 1 will appear in the main library window as shown.



Embrilliance Embroidery Software library showing Text Envelope designs with satin stitch borders

Find and select your preferred envelope design. With the design highlighted, click the OK button at the upper right to merge the design into your new design page as shown.



Embrilliance Essentials with Word Art / Text Warping Envelope Design Merge

You'll see that there are several new objects in the Objects pane at the right side of the design area. The first in the sequence is our Envelope shape. In this Ribbon Up design, the Envelope shape is named Envelope 1. This is important to remember, as the number after its name is how we'll connect our lettering object to this envelope in the next step. Looking through the rest of the objects reveals the Satin Border elements that make up the banner design. These are not necessary for the Envelope to function, but they do make a lovely frame for the shaped text we are about to create.

Step 3: Add Lettering
Now that we have our Envelope shape in our design page, we are ready to add our lettering object. Where the lettering object is in the sequence of our design won't matter to the Envelope tool, just as long as it comes after (below) its Envelope in the object tree. Since the Envelope shape is first in our design, we can simply click the Create Letters tool on our toolbar to create a new Lettering object on top of our existing design. At first, nothing will change about our lettering object; for the software to know that we want to use a particular Envelope with a Lettering object, we need to add the number of our Envelope to the name of the Lettering object we want to shape.




To attach our lettering object to the Envelope, we'll double click on the name of the lettering object, allowing us to edit the object name. Once we can edit the name, we will simply add a number that corresponds to the number of the Envelope we want shape this particular lettering object. The number itself doesn't matter, all that matters is that the number matches that in the name of our Envelope. In this case, we'll change the lettering object's name to "Letters 1" and press the enter key to confirm. At this point, the lettering will not have changed shape.



Lettering Object added atop Envelope Shape in the Embrilliance Platform

To finish the process, select the Letters 1 object, and change the default "ABC" text to whatever you'd like to appear in your design. Press the enter key when finished, then click the design page away from the lettering object to deselect it. Like magic, your letters will now take the shape of the Envelope to which they are attached.



Embrilliance Embroidery Text in an Envelope Ribbon Design

Note: Your design page can contain multiple envelopes to create a template! To use a multi-envelope template like the Three Position Shield from the Envelopes 1 library, follow these same steps for each envelope shape, making sure to name each Lettering object with the number corresponding to the desired envelope.

Editing Lettering
If you want to change anything about your lettering, you can select the lettering object and make changes. This includes operations like changing the position of the letters manually, changing the slant or spacing of the letter, or changing the text itself. When the lettering object is selected, it will revert temporarily to the unshaped form as shown below, making it easy to see your changes.



Editing and Spacing Lettering in Embrilliance Embroidery Software

Once any alterations have been made, simply click the design page away from the lettering object to deselect it and the lettering will snap back into the attached Envelope shape. You'll see that the envelope shape is applied to the changed lettering object. In this example, the spacing between letters was increased dramatically which can be seen in wider spacing present in the final Enveloped lettering shape.




Note: You can also use Envelopes with Multi-Line text! Simply select the Multi-Line text tool in the Letters tab of the Properties pane and customize your text. Remember, however, that no matter what text you place in an envelope, your satin stitches must maintain the minimum size and spacing needed to stitch correctly.




Take time to Play!
Now that you know how to use envelopes, the best way to get results is to let yourself experiment. Take some time to play with these designs, try your favorite fonts to see how well they warp, and see where your muse takes you. The opportunities for creativity are endless!

Click here for FREE His and Hers patch designs!

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

StitchArtist is a program to create machine embroidery designs from scratch. You start using existing artwork or by ‘drawing with stitches.’ You control the shapes, set the stitch type and properties, and StitchArtist generates stitches for you. When you want to create stitches, that’s what it does.

StitchArtist is a journey many years in the making, and has been designed for ease-of-use and digitizing education. The process of design creation, commonly called ‘digitizing’, requires a skilled person using a specialized tool. StitchArtist is that tool, but it is designed to take the difficulty out of the software, leaving the user to concentrate on their designs.

In a radical departure from the typical digitizing interface, StitchArtist uses a single mode to draw, set stitches, size, edit, rotate, sequence and set properties of design objects. It is easy and intuitive once you know the very basics

StitchArtist comes in levels which suit different skill levels:

Level 1
Level 1 is designed for a hobby embroiderer who needs to be able to create stitches without going into debt or spending much computer time. Level 1 offers a limited set of stitch types and, more importantly, properties for those stitches, so that the user can simply ‘create’ without needing to learn many steps. Typical projects for Level 1 are applique designs, running stitch designs and simple filled shapes, backgrounds or unifying elements for design compositions etc.

Level 2
Level 2 includes Level 1 and is designed for production and skills training for those who would like to create more sophisticated designs (logos), as well as a more complete set of tools. It will allow the user to learn a wide cross-section of stitch types and properties, and have enough freedom to create virtually any design. If you are looking to use satins to their fullest extent, this is where you need to look. You can also import .SVG art and some cutting file formats (.FCM and .studio) for cross-purpose use.

Level 3
Level 3 includes Level 1 and Level 2 and is designed for someone who either loves to create designs or works commercially in the embroidery field. This level includes advanced items such as Styles, QuickStyles, an Eyelet tool, Carving lines, graphical operators such as Cut, AND, Union, Flatten, Inflate/Deflate, Re-construct and Break. It also allows for the content within the product to be expanded by publishing Motifs and Embossed effects. Additional controls are available to work how you like. The properties for each stitch type are fully revealed, and operations for vector support, including export, are added; now you can draw .svg and cutting machine designs directly. There’s even a tool to automatically outline existing design stitches.

Tell me more…
StitchArtist is not a photo-to-stitch tool, nor is it an autodigitizing program. The results of those are very subjective, and there are plenty of tools to do those in the market. When we find a process that is good enough for us, we’ll produce it. Meantime, straightforward design creation is the focus of this product. If you want to make designs for hobby, cottage industry or professional use, this is for you. If you really want to learn to digitize, this program has been designed for simplicity and instruction from the ground-up.

It is not a customizing tool (used to manipulate existing designs.) It does not contain Essentials or Enthusiast, although it does run within the Embrilliance Platform so the user interface is consistent. You can purchase StitchArtist by itself if desired; it does not rely on any other purchased product, nor is it an upgrade of any other product.




How to use Envelopes in Embrilliance

With the recent gold release of the 1.161 update, all Embrilliance Platform programs gained text-formatting superpowers! As part of this incredible update, users of all platform programs who update to version 1.161 now have the ability to use Envelopes. These specially-formatted shapes which can be created in any level of StitchArtist software can warp and arrange text to create incredible decorative effects.




Step 1. Install the Envelopes 1 Library
First, make sure that you are running the latest version (1.161+) by clicking About in the Help menu. Check for the version under the yellow needle icon in the resulting window.


*Note: If you running a version previous to the latest 1.161, Envelopes will not function.

Step 2: Select an Envelope Design
Once you have the library installed, create a new design page in your Embrilliance Platform program by clicking New Page under the File menu. With your new page created, click the Merge Design button on your toolbar to open your libraries. In the Catalog drop down menu at the upper left of the Library window, you will find a category titled Embrilliance: Envelopes. Select this category and the banners, ribbons, and shapes of Envelopes 1 will appear in the main library window as shown.



Embrilliance Embroidery Software library showing Text Envelope designs with satin stitch borders

Find and select your preferred envelope design. With the design highlighted, click the OK button at the upper right to merge the design into your new design page as shown.



Embrilliance Essentials with Word Art / Text Warping Envelope Design Merge

You'll see that there are several new objects in the Objects pane at the right side of the design area. The first in the sequence is our Envelope shape. In this Ribbon Up design, the Envelope shape is named Envelope 1. This is important to remember, as the number after its name is how we'll connect our lettering object to this envelope in the next step. Looking through the rest of the objects reveals the Satin Border elements that make up the banner design. These are not necessary for the Envelope to function, but they do make a lovely frame for the shaped text we are about to create.

Step 3: Add Lettering
Now that we have our Envelope shape in our design page, we are ready to add our lettering object. Where the lettering object is in the sequence of our design won't matter to the Envelope tool, just as long as it comes after (below) its Envelope in the object tree. Since the Envelope shape is first in our design, we can simply click the Create Letters tool on our toolbar to create a new Lettering object on top of our existing design. At first, nothing will change about our lettering object; for the software to know that we want to use a particular Envelope with a Lettering object, we need to add the number of our Envelope to the name of the Lettering object we want to shape.




To attach our lettering object to the Envelope, we'll double click on the name of the lettering object, allowing us to edit the object name. Once we can edit the name, we will simply add a number that corresponds to the number of the Envelope we want shape this particular lettering object. The number itself doesn't matter, all that matters is that the number matches that in the name of our Envelope. In this case, we'll change the lettering object's name to "Letters 1" and press the enter key to confirm. At this point, the lettering will not have changed shape.



Lettering Object added atop Envelope Shape in the Embrilliance Platform

To finish the process, select the Letters 1 object, and change the default "ABC" text to whatever you'd like to appear in your design. Press the enter key when finished, then click the design page away from the lettering object to deselect it. Like magic, your letters will now take the shape of the Envelope to which they are attached.



Embrilliance Embroidery Text in an Envelope Ribbon Design

Note: Your design page can contain multiple envelopes to create a template! To use a multi-envelope template like the Three Position Shield from the Envelopes 1 library, follow these same steps for each envelope shape, making sure to name each Lettering object with the number corresponding to the desired envelope.

Editing Lettering
If you want to change anything about your lettering, you can select the lettering object and make changes. This includes operations like changing the position of the letters manually, changing the slant or spacing of the letter, or changing the text itself. When the lettering object is selected, it will revert temporarily to the unshaped form as shown below, making it easy to see your changes.



Editing and Spacing Lettering in Embrilliance Embroidery Software

Once any alterations have been made, simply click the design page away from the lettering object to deselect it and the lettering will snap back into the attached Envelope shape. You'll see that the envelope shape is applied to the changed lettering object. In this example, the spacing between letters was increased dramatically which can be seen in wider spacing present in the final Enveloped lettering shape.




Note: You can also use Envelopes with Multi-Line text! Simply select the Multi-Line text tool in the Letters tab of the Properties pane and customize your text. Remember, however, that no matter what text you place in an envelope, your satin stitches must maintain the minimum size and spacing needed to stitch correctly.




Take time to Play!
Now that you know how to use envelopes, the best way to get results is to let yourself experiment. Take some time to play with these designs, try your favorite fonts to see how well they warp, and see where your muse takes you. The opportunities for creativity are endless!

Click here for FREE His and Hers patch designs!

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

We're proud to announce that our long-anticipated update to the Embrilliance platform is now available FREE for all users on our downloads page.

ESSENTIALS FEATURES

Merg, Size, Colorize, Format Conversion, Lettering, Monogramming, Undo, Save, Overlap, 12 Alphabet Fonts, for Macintosh and Windows Computers.


Embrilliance is the only brand in the World that offers embroidery software running native on Mac with OSX, Windows XP 32-bit, Windows Vista 32/64, Windows 7 32/64 (faster)

Please click HERE to view the 12 Fonts Included

Every embroiderer needs to do some basic things. Those things should be easy and fun, not an hour long trip to the dealer for a class. And it shouldn’t cost an arm and a leg, either. And just because your computer is a Mac with OSX or a PC with Windows 7 64 doesn’t mean you should be left out! Embroidery software should be easy, fun and useful for everybody.

A couple years ago, someone told us what they like to use in their software. And then we heard the same thing from someone else. And it occurred to us that there are some things which are, “Essential to every embroiderer.” Yet many software programs have everything and the kitchen sink too, and they charge you for it. So we put just those things in one simple, inexpensive program, and called it, “Essentials.”

What are these “Essentials?”

Using your Mac or Windows PC you can:
•Merge embroidery designs in almost any format, even while they are in .ZIPs.
•Resize, with stitch recalculation.
•Colorize.
•Convert Thread Brands on your designs.
•Add lettering in Multi-Line, Monogram and Circle modes. You can even spiral text or make really LARGE letters.
•Save in your machine’s format.
•Save working files so that you can edit text later.
•Overlap designs and have significant understitching removed.
•Run a simulator to show how your designs will sew out.
•Group/ Ungroup
•Change or remove individual colors in a design.
•Have many chances to Undo your work.
•There are special, self-modifying designs that can be used, and some come with the program. These designs calculate their stitches as you play with them for super results!
•Intel Mac OSX 10.5 (Leopard) and later
•Windows XP 32-bit, Windows Vista 32/64, Windows 7 32/64
•Embrilliance is the only brand in the World that offers embroidery software running native on Mac and Windows 32 and Windows 64 (so it’s faster)!

*With Embrilliance Essentials you can type in BX format fonts for embroidery files and for graphics. Embroidery Essentials is the only software that you do not have to merge letter by letter. Embrilliance Essentials works with your embroidery machine or Scan N Cut.

Wondering if it works with files for your machine? Yes it does!

Essentials can read:
.ART, .ART42, .ART50, .ART60, .CND, .CSD, .DST, .DSZ, .EMB, .EMD, .EXP, .EXP+, .HUS, .JAN, .JEF, .JEF+, .PCS, .PCM, .PES, .PHB, .PHC, .PHD, .SEW, .SHV, .TAP, .VIP, .VP3, .XXX

Essentials can write:
.CSD, .DST, .DSZ, .EXP, .EXP+, .HUS, .JEF, .PCS, .PCM, .PES, .SEW, .SHV, .TAP, .VIP, .VP3, .XXX

And it also includes special features to enable Mac users to write USB devices and floppy disks for use with embroidery machines.

Serial Number can be found inside the cover.

The same CD is compatible for Windows and Mac:
Windows® Requirements
Windows XP 32-bit, Windows Vista 32/64, Windows 7, 8/8.1/10 32/64

Mac Requirements:
Mac OSX v: 10.5 and up

Please Click HERE to visit the Downloads page to view the Help or to read the Manual

And Please click HERE to visit our Forum which has many questions and answers on Essentials

You Tube Videos on Embrilliance Essentials

Embrilliance Videos You Tube Channel by BriTonLeap

StitchArtist Digitizing Fans is all about digitizing in StitchArtist and with over 101,000 members it is amazing to see the successful projects created by both new and experienced digitizers. Our customers are a fabulous sales force - they can't help but tell everyone how much they love to use their software.

The Brilliant Embrilliance Facebook Group has over 25,000 members and chat about all the Embrilliance programs - what they are doing with the software and creating at the machine! The StitchArtist Digitizing Fans is all about digitizing in StitchArtist and with over 101,000 members it is amazing to see the successful projects created by both new and experienced digitizers. Our customers are a fabulous sales force - they can't help but tell everyone how much they love to use their software.

Embrilliance has a strong presence on social media - our Facebook page has over 101,000 active followers! From projects, inspiration and the all time favorite Tool Tip Tuesday - our fan base actively interacts with our page with likes, comments and shares of our daily posts.

Hours of instruction available on the Embrilliance youtube channel Embrilliance has a strong presence on social media - our Facebook page has over 101,000 active followers! From projects, inspiration and the all time favorite Tool Tip Tuesday - our fan base actively interacts with our page with likes, comments and shares of our daily posts.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

This font collection is the long-anticipated followup to Embrilliance's first font collection! The collection features 17 beautiful fonts. If you're looking for more fonts for lettering or monograms, this is the collection for you!

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

They might be small, but they are impactful! These super tiny fonts are digitized and ready for use in your projects in The Embroidery Tool Shed.

Includes these fonts:

• Arial Small
  
• Bauhaus Small
  
• Brush Small
  
• Casual Small
  
• Century Small
  
• Diana Small
  
• Goudy Small
  
• Hobo Small
  
• Impress Small
  
• Revue Small
  
• Rounded Small

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

StitchArtist Level 1 is for hobby embroiderers to inexpensively “Draw with stitches” and not spend too much time at the computer.

Level 1 offers a robust set of stitch types, and properties, but with some of the traditional “digitizing” complexity removed.

StitchArtist Level 1 is a great starting point for design creators, or anyone wanting to add stitches to a project.

Typical projects include: Redwork, quilting, stippling, applique, freestanding lace fills, basic cross-stitch, outlining, satin borders, filled shapes and adding stitches to designs.

StitchArtist is a program to create machine embroidery designs from scratch.

Draw your own, use the built-in shapes, or bring in a picture (such as .jpg), then ‘draw with stitches’ over the artwork, using it as a guide.

You control the shapes, sizes, set the stitching properties, and StitchArtist generates the actual stitches.

Those familiar with any modern drawing tool will feel very comfortable with StitchArtist, but the easy ‘draw with points’ spline tool makes creating shapes easy to learn.

When assigning stitches to shapes, you have freedom to change your mind at any time. You can assign any shape a new stitch type easily.

EASIER EDITING AND CREATION
Creating designs often requires the ability to edit shapes. StitchArtist has features that make object creation and editing easy:

• Stitch generation is instant and automatic.
  
• No mode changes for selection, editing, coloring, moving, sizing, rotating or adjusting properties.
  
• You can work in any number of display modes such as 3D. You aren’t locked to a specific mode during any process.
  
• Hundreds of editable vector shapes are included. Several geometric shapes are easily created and altered with the automated shape tool.
  
• Perfect curves are 3 clicks away with the 3 point arc tool.
  
• Users unfamiliar with Bezier curves can use a simulated spline (draw with points) system that’s easier to learn and teach.
  
  All you need is a simple project to get started on, and a willingness to try. You would be amazed at how many embroiderers thought that creating a design or adding stitches would be too hard – and then discovered that they can do it!
  
  It’s one reason that StitchArtist has the largest online community of any design creation or digitizing tool. People love to share ideas, projects, designs, and simply delight in what each other have created!
  
  Level 1 does not include tools that new embroiderers find overwhelming. One example is the alternating input (Level 2) that is used by all professional digitizers, but requires a bit experience to use.
  
  Ready for more? The other levels are available as upgrades, and it costs no more to take the upgrade route than to purchase a higher level as one item. The upgrade to Level 2 is one of our more popular products, because so many people discover that they can make designs and want to do more!
  
  StitchArtist is embroidery design-creation software. It is easy-to-use and designed for everyone: New embroiderers, artists, graphics professionals, and seasoned apparel decorators. This is accomplished with product levels. As the level goes up, additional tools and control are added. Created with education in mind, StitchArtist’s level upgrades allow you to grow the software as you learn to take more control over your embroidery.
  
  The process of design creation, commonly called ‘digitizing’, generally requires a skilled person using a specialized tool. StitchArtist is that tool, but created specifically to take the traditional difficulty out of the process so users can concentrate on design and creativity.
  
  In a radical departure from the typical digitizing interface, StitchArtist uses a single mode to draw, set stitches, size, edit, rotate, sequence, and set properties of design objects. It is easy and intuitive. There is built-in help that replicates the printable .PDF manuals (download at any time), very active social communities, and of course, the award-winning Embrilliance support system.
  
  Embrilliance creates tools that people love to use. We put you in control, and use automation only where appropriate. This is how the best designs are made.
  
  Given the easy-to-use genius of StitchArtist, it’s easy to think it is an automated digitzing tool. It is not. StitchArtist is not a photo-to-stitch tool or an auto-digitizing program. Such things are sold but do not create nice embroidery. There is no such thing as ‘conversion’ from an image to an embroidery design. It takes a human being, with an eye for stitch types, but no real artistic skill is required. Can you trace? Can you click your mouse or tap your pen? You have all the skill you need.
  
  StitchArtist is part of the Embrilliance Platform, sharing one program with our other titles like Essentials and Enthusiast. This means that as you add titles, your features grow without having to switch between programs! Embrilliance products are modular: You do not “Need another program first.” You can use only StitchArtist. If you have other titles, they work together seamlessly to offer incredible ability in a single interface.
  
  StitchArtist is a design creation tool, which means it does not manipulate existing designs. Our other products, like Essentials, handle those tasks. Whether you want to create or embellish designs for hobby, friends, sale or full professional use, StitchArtist is for you.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

StitchArtist Level 2 is for hobbyists and professionals who want to create more sophisticated designs like logos, mascots, custom text treatments, and detailed designs of all styles.

Level 2 is great for those who want to jump directly into fully custom, graphical design work, users of Level 1 who are looking for more control over their stitches, and those with existing design and digitizing skills. With the addition of Bezier drawing, left-right, and sided column input, users of vector drawing software and classic embroidery digitizing software alike will find familiar methods for creating design elements.

StitchArtist Level 2 is designed for production and skills training, including a wide cross-section of embroidery stitch types and properties with enough freedom and control to create virtually any design. If you are looking to use satin stitches to their fullest extent, StitchArtist 2 is for you.

Typical Level 2 projects include: traditional embroidery designs, commercial logos, team sports mascots, custom text / logotypes, patches, stock designs meant for resale design collections, in-the-hoop designs like custom-shaped keyfobs, and simple puffy foam objects using our automated 3D foam underlay.

You do not need to own StitchArtist Level 1 to use this version of StitchArtist Level 2; this product contains all Level 1 and Level 2 features. If you do already own Level 1 and want to upgrade, click here to find the Level 1 to Level 2 upgrade package which allows you to add level 2 features to your existing Level 1 StitchArtist program at a reduced upgrade price. You can always purchase an upgrade to any level of StitchArtist – for the difference in price between the Full Version programs.

StitchArtist is a program to create machine embroidery designs from scratch.

Draw, use the built-in shapes, import vector/cutting files and edit the shapes for embroidery, or bring in a picture (such as .jpg), then ‘draw with stitches’ over the artwork, using it as a guide.

You control the shapes, sizes, set the stitching properties, assign stitch angles by adding inclination lines, and StitchArtist generates the actual stitches.

Those familiar with vector drawing will feel very comfortable with StitchArtist, but the easy ‘draw with points’ spline tool makes creating shapes easy to learn for everyone.

When assigning stitches to shapes, you have freedom to change your mind at any time. You can assign any shape a new stitch type easily.

Creating designs often requires the ability to edit shapes. StitchArtist has features that make object creation and editing easy:

• Stitch generation is instant and automatic.
  
• No mode changes for selection, editing, coloring, moving, sizing, rotating or adjusting properties.
  
• You can work in any number of display modes such as 3D. You aren’t locked to a specific mode during any process.
  
• Hundreds of editable vector shapes are included. Several geometric shapes are easily created and altered with the automated shape tool.
  
• Perfect curves are 3 clicks away with the 3 point arc tool.
  
• Users unfamiliar with Bezier curves can use a simulated spline (draw with points) system that’s easier to learn and teach.
  
  YOU CAN DO THIS!
  All you need is a project to get started on and a willingness to try. Even master digitizers start by creating simple shapes, and learning about stitches and settings by reaching a little further with every piece they make. If you want to reach further and make something special, StitchArtist level 2 has both the simple tools to get you started and the professional power to help you grow.
  
  It’s one reason that StitchArtist has the largest online community of any design creation or digitizing tool. People love to help each other figure out new ways to use stitches, work out the best way to draw objects, discuss the best ways to digitize for a specific garment or object, and simply delight in how the community members grow in their craft!
  
  Level 2 has all the ease of Level 1, but with increased control over the way stitches are generated and a host of tools that professional digitizers know and love. With Level 2, you can build your experience and have all the tools you need for professional, production-worthy designs.
  
  Upgrade on your Schedule
  Ready for the top of the line? StitchArtist level 3 is available complete or as an upgrade, and it never costs more to take the upgrade route than it does to buy level 3 at the outset. Level 2 users who master the its tools and those familiar with vector drawing and design like level 3’s additional drawing and shaping tools, while stock design sellers who want quick, all-format stitch-file savings, and those who want to create their own custom motifs, patterns, and object-based fonts upgrade to get professional custom tools to help them quickly serve customers and publish professional assets for the Embrilliance community.
  
  StitchArtist is embroidery design-creation software. It is easy-to-use and designed for everyone: New embroiderers, artists, graphics professionals, and seasoned apparel decorators. This is accomplished with product levels. As the level goes up, additional tools and control are added. Created with education in mind, StitchArtist’s level upgrades allow you to grow the software as you learn to take more control over your embroidery.
  
  The process of design creation, commonly called ‘digitizing’, generally requires a skilled person using a specialized tool. StitchArtist is that tool, but created specifically to take the traditional difficulty out of the process so users can concentrate on design and creativity.
  
  In a radical departure from the typical digitizing interface, StitchArtist uses a single mode to draw, set stitches, size, edit, rotate, sequence, and set properties of design objects. It is easy and intuitive. There is built-in help that replicates the printable .PDF manuals (download at any time), very active social communities, and of course, the award-winning Embrilliance support system.
  
  Given the easy-to-use genius of StitchArtist, it’s easy to think it is an automated digitzing tool. It is not. StitchArtist is not a photo-to-stitch tool or an auto-digitizing program. Such things are sold but do not create nice embroidery. There is no such thing as ‘conversion’ from an image to an embroidery design. It takes a human being with an eye for stitch types, but no real artistic skill is required. Can you trace? Can you click your mouse or tap your pen? You have all the skill you need to start.
  
  StitchArtist is part of the Embrilliance Platform, sharing one program with our other titles like Essentials and Enthusiast. This means that as you add titles, your features grow without having to switch between programs! Embrilliance products are modular: You do not “Need another program first.” You can use only StitchArtist. If you have other titles, they work together seamlessly to offer incredible ability in a single interface.
  
  StitchArtist is a design creation tool, which means it does not manipulate existing designs. Our other products, like Essentials, handle those tasks. Whether you want to create or embellish designs for hobby, friends, sale or full professional use, StitchArtist is for you.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

StitchArtist Level 3 is a tool for lovers of digitizing and hard-working creators who want versatility and productivity built in to their toolkit.

Level 3 is the choice of custom digitizers, stock design sellers, font-creators, designers, and embroidery professionals.

With configurable drawing tools and utilities that let you import and rework vector shapes, automatically outline existing stitches, create contours, trace line art with a click, branch objects of any stitch type, convert object-based fonts into editable shapes as well as creative options for custom motifs, carving lines, and even custom object-based fonts, StitchArtist Level 3 unlocks your potential at every step of the creation process. Level 2 lets you create anything; Level 3 lets you create anything faster, with more creative treatments, and publish it all for the embroidery world simply.

Typical Level 3 Projects include: detailed and/or complex designs, commercial logos, vector import, redesign, and editing for embroidery, creating designs and templates for published stock collections, publishing designs to multiple stitch file formats as well as to installable libraries for Embrilliance, creating custom fonts or font extensions for commercial clients and/or for publication in the BX format for distribution and/or sale to the Embrilliance community, multimedia designs including SVG vector cut files, and almost anything else you can imagine.

You do not need to own StitchArtist levels 1 or 2 in order to purchase StitchArtist Level 3; this full version contains all Level 1, Level 2 and Level 3 features.

If you own Level 1, click here for the Level 1 to 3 upgrade to add level 2 and 3 features to your program. If you own Level 2, click here for the Level 2 to 3 upgrade package. You can always upgrade to any level of StitchArtist for the difference in price between the full version programs.

StitchArtist is a program to create machine embroidery designs from scratch.

Draw, use the built-in shapes, import vector/cutting files so you can manually edit and use graphical operators to adapt the vector shapes for embroidery, or bring in a picture (such as .jpg), then ‘draw with stitches’ over the artwork, using it as a guide.

You control the shapes, sizes, set the stitching properties, assign stitch angles by adding inclination lines, and StitchArtist generates the actual stitches.

Those familiar with vector drawing will feel very comfortable with StitchArtist, but the easy ‘draw with points’ spline tool makes creating shapes easy to learn for everyone.

When assigning stitches to shapes, you have freedom to change your mind at any time. You can assign any shape a new stitch type easily.

Creating designs often requires the ability to edit shapes. StitchArtist has features that make object creation and editing easy:

• Stitch generation is instant and automatic.
  
• No mode changes for selection, editing, coloring, moving, sizing, rotating or adjusting properties.
  
• You can work in any number of display modes. You aren’t locked to a specific mode during any process.
  
• Hundreds of editable vector shapes are included. Simple geometric shapes are easily created and altered with the automated shape tool.
  
• Perfect curves are 3 clicks away with the 3 point arc tool.
  
• Users unfamiliar with Bezier curves can use a simulated spline system that’s easier to learn and teach; helpful especially in early instruction.
  
• Import and Export in common vector forms such as .svg and cutter file formats like .studio or .fcm.
  
• Quick styles and Stylesheets accelerate the workflow by giving you fast access to common properties for stitch objects and allowing you to publish these properties for installation on any StitchArtist system.
  
  With the knowledge of embroidery you are building and the skills to use them, the powerful tools in StitchArtist 3 will take your work to the next level of creativity and productivity. When you want to design and digitize like a pro, whether or not you’re in it to work commercially, you want tools that work and take the drudgery out of your process. StitchArtist 3 is here to help you design, digitize, publish, and distribute your creations.
  
  The advanced automation and tools aren’t the only helpful parts of StitchArtist. Our engaged and active users make up the largest online community of any design creation or digitizing tool. StitchArtist fans love to help each other figure out how to create new assets, work with vector art and export files, discuss artistic and efficient digitizing, share assets and strategies, and simply delight in masterpieces the community creates!
  
  StitchArtist Level 3 combines the ease of Level 1 with the power of Level 2 and adds the tools that to complete a professional workflow. With level 3, you have everything you need to create excellent work and distribute it anywhere in the embroidery world.
  
  Upgrade on your Schedule
  Not sure if you are ready for level 3? StitchArtist level 3 is available complete or as an upgrade, and it never costs more to take the upgrade route than it does to buy level 3 at the outset. If you want to learn to draw shapes first with the robust tools of StitchArtist Level 2, you can work on your mastery and move to Level 3 whenever you want.
  
  StitchArtist is embroidery design-creation software. It is easy-to-use and designed for everyone: New embroiderers, artists, graphics professionals, and seasoned apparel decorators. This is accomplished with product levels. As the level goes up, additional tools and control are added. Created with education in mind, StitchArtist’s level upgrades allow you to grow the software as you learn to take more control over your embroidery.
  
  The process of design creation, commonly called ‘digitizing’, generally requires a skilled person using a specialized tool. StitchArtist is that tool, but created specifically to take the traditional difficulty out of the process so users can concentrate on design and creativity.
  
  In a radical departure from the typical digitizing interface, StitchArtist uses a single mode to draw, set stitches, size, edit, rotate, sequence, and set properties of design objects. It is easy and intuitive. There is built-in help that replicates the printable .PDF manuals (download at any time), very active social communities, and of course, the award-winning Embrilliance support system.
  
  Embrilliance creates tools that people love to use. We put you in control, and use automation only where appropriate. This is how the best designs are made.
  
  Given the easy-to-use genius of StitchArtist, it’s easy to think it is an automated digitzing tool. It is not. StitchArtist is not a photo-to-stitch tool or an auto-digitizing program. Such things are sold but do not create nice embroidery. There is no such thing as ‘conversion’ from an image to an embroidery design. It takes a human being with an eye for stitch types, but no real artistic skill is required. Can you trace? Can you click your mouse or tap your pen? You have all the skill you need to start.
  
  StitchArtist is part of the Embrilliance Platform, sharing one program with our other titles like Essentials and Enthusiast. This means that as you add titles, your features grow without having to switch between programs! Embrilliance products are modular: You do not “Need another program first.” You can use only StitchArtist. If you have other titles, they work together seamlessly to offer incredible ability in a single interface.
  
  StitchArtist is a design creation tool, which means it does not manipulate existing designs. Our other products, like Essentials, handle those tasks. Whether you want to create or embellish designs for hobby, friends, sale or full professional use, StitchArtist is for you.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

We're proud to announce that our long-anticipated update to the Embrilliance platform is now available FREE for all users on our downloads page.

for Macintosh AND Windows Computers. Create and View Thumbnail Images on your Embroidery Design Files, Formats

Embrilliance Thumbnailer Reads Embroidery designs and creates the pictures for your computer to display compatible with Mac and PC.

*Attention Macs! See Brother SARES Roma MAC Embroidery Lettering Software, Monogram, Edit, Arch, 227 Designs, 170 Fonts, plus Digitize True Type Fonts, 11 Templates, 109 Frames, Name Drop. Etc/ (BES2MACv)

"Embroidery design viewing software for OS X and Windows. View designs as Icons or Thumbnails right in Explorer or Finder."

Our favorite embroidery tools are those that create 'aha moments.' The Embrilliance Thumbnailer software program is a simple to install program that works its magic by creating thumbnail images of your embroidery designs. It will have you saying 'Aha! There's the embroidery design I was looking for!'

Imagine yourself clicking on your My Documents folder. Then you click on a folder where you store you very large library of embroidery designs. (We know you have a large stash!) In the past, you would see a list of file names but no preview. Finding the embroidery designs was a challenge. How can your creativity flourish under such restrictive conditions? All you really want to do is find the perfect design from your library for your next embroidery project.

Your embroidery files WITHOUT the Embrilliance Thumbnailer. The file names are plain and non-functional!

Now your creativity and productivity will flourish! With the Embrilliance Thumbnailer, you can actually SEE the embroidery designs! No more guessing what "Butterfly.pes" or any of your designs look like anymore!

This software is a must-have embroidery tool for every machine embroiderer. Simple to install and even easier to use, you'll wonder how you ever functioned without it. It also works on your Mac.

Thumbnailer is one of those programs that is so simple that many people forget that its there - until they get a new computer and say "OMG why can't I see my designs?!?". You install Thumbnailer, give it a job and it goes to work displaying pictures of your embroidery designs in Windows Explorer or Apple Finder WITHOUT you having to open the files! For those that have Thumbnailer, you can now see pictures of your electronic cutting files on both Mac and Windows computers. That's right, another FREE update from Embrilliance :-)

As always, you can find the current installation AND update programs on our Downloads page.

Extended US Warranty: 30 days replacement if defective.

Non-US Warranty: 30 days parts and labor.

This is an Add on Hoop, and Requires the Exchange Arm, or 7in1 or 8in1 set for use.

• 7" x 11 Hooping area, not the 12x14" image shown.
  
• For use in conjunction with the Exchange Arm for the the Brother PR-600, 620, 650, 655, PR1000, PR1000E, Babylock EMP6, BMP6, BMP8, ENT10, BND9, BNT10 Embroidery Machines.
  
  Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!
  
  Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment).
  
  Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc.
  
  Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
  
  

  Click HERE for Fast Frames Instructions
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
  

Non-US Warranty: 30 days parts and labor.

Fast Frames 101-012 is a stand along frame and does not use the arms that come with 7in1 or 8in1 Fast Frames package. It snaps into the arms that come with your Brother PR machine.

Great for large or heavy items like quilting squares, blankets, rugs, etc. Has an embroidery field of 12” x 14” and other customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.

*Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!

*Requires Brother PE Design or embroidery software on your computer to split the design in two, before running both sides in this 14x12" hoop. Embroider up to 7X12" then turn around for another 7X12" for a merged 14x14" design. Need to create a custom hoop in PE Design Next in order for the design to split. This is located in the design page settings. It is called Extra Large embroideries in the instruction manual.

Embroider up to 7x12" then turn around for another 7x12" for a merged 14x12" design. Hoop frame for uses adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.

• 12" x 14" Hooping area. Require
  
• For use with the Brother PR-600, 620, 650, 655E, PR1000, PR1000e and Babylock EMP6, BND9, BNT10L, BMP8/9, ENT10
  
  
  
• Expand your embroidery options! Take your PR600 series machine to the next level with this jumbo hoop. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 12” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
  
  Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
  
  

  Click HERE for Fast Frames Instructions
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
  
  For use with: Entrepreneur® PR650, Entrepreneur® PR650e, Entrepreneur® PR655, Entrepreneur® Pro PR1000, Entrepreneur® Pro PR1000e, PR-600, PR600II, PR620, PR-655C

Non-US Warranty: 30 days parts and labor.

*Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time! This Jumbo Frame allows you to use a large sew field area by splitting your design.

*Requires Software that will Split Designs. Requires Brother PE Design or other software on your computer to split the design in two, before running both sides in your 14x14" hoop. Embroider up to 7x14" then turn around for another 7x14" for a merged 14x14" design. Needs to create a custom hoop in PE Design Next in order for the design to split. This is located in the design page settings. It is called Extra Large embroideries in the instruction manual.

Hoop frame for uses adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. With an embroidery field of 12” x 14”, now you can enjoy even more customization options. Sew 14” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.

• 14" x 14" Hooping area
  
• For use with the Brother PR1000 and Babylock ENT10, BNT10
  
  
  
• Expand your embroidery options! Take your PR600 series machine to the next level with this jumbo hoop. With an embroidery field of 14” x 14”, now you can enjoy even more customization options. Sew 14” x 7” then simply reverse the hoop to complete the remaining half of the design to take advantage of the 14” length.
  
  Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
  
  

  Click HERE for Fast Frames Instructions
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

Note: New 8 in 1 Fast Frames Sets are in stock with extra 12x7" hoop for Brother PR600 and 14x7" Hoops which fit on Fast Frame Arm for PR1000 and Brother PR600 620 650 Babylock EMP BMP Embroidery Machines

Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!

Fast Frames comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:

• The hoop attachment holding arm for PR600 series
  
• 2" X 4" Mono Hoop
  
• 2.5" X 4" Pocket Hoop
  
• 3" X 4" Pocket Hoop
  
• 5" X 4" Christmas Stocking Hoop
  
• 6” Radius hat hoop for sides and backs of hats and caps
  
• 7" X 5" Attache case hoop
  
• 7"X 7" Deep Bag HOOP
  
  Key Benefits:
  
• Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
  
• Relief from carpel tunnel
  
• Excellent repeatability, great for multi head operations
  
  Please note: Since this is not a Brother built product, PR600 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
  
  Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
  
  

  Click HERE for Fast Frames Instructions
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

Includes 4 Tubular Bag, Hat, Pocket, Sock Hoops, 2 Flat Hoops, Bonus 12x7" Hoop, 19.25" Fast Frames Arms, for Brother PR600, PR620, PR650, PR655, PR670E, plus Babylock EMP BMP 6 Needle Embroidery Machines.

Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!

Fast Frames 8 in 1 hoop set comes with 1 hoop holder arm, plus 6 sizes of single tubular and flat hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:

• The 19.25" wide hoop attachment holding arm for Brother PR600 series, Babylock EMP BMP
  
• 2" X 4" Mono Hoop
  
• 2.5" X 4" Pocket Hoop
  
• 3" X 4" Pocket Hoop
  
• 5" X 4" Christmas Stocking Hoop
  
• 6” Radius hat hoop for sides and backs of hats and caps
  
• 7" X 5" Attache case hoop
  
• 7"X 7" Deep Bag HOOP
  
• 12x7" Tubular Hoop Frame for Larger Handbags, Etc.
  
  Key Benefits:
  
• Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
  
• Relief from carpel tunnel
  
• Excellent repeatability, great for multi head operations
  
  Please note: Since this is not a Brother built product, PR600 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
  
  Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment).
  
  Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc.
  
  Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
  
  

  Click HERE for Fast Frames Instructions

Non-US Warranty: 30 days parts and labor.

Compare 8in1 for $50 More! Fast Frames 8in1 Hoop Set, Brother PR1000 PR1000E Babylock ENT BNT10, Free 27 Floriani* 4 Tubular Bag Hat Pocket Sock Hoops, 2 Flat +14x7" +Arm 22"W
Note: New 8 in 1 Fast Frames Sets are in stock with extra 12x7" hoop for Brother PR600 and 14x7" Hoops which fit on Fast Frame Arm for PR1000 and Babylock Embroidery Machines

Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!

Fast Frames comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:

• The hoop attachment holding arm for PR1000 series
  
• 2" X 4" Mono Hoop
  
• 2.5" X 4" Pocket Hoop
  
• 3" X 4" Pocket Hoop
  
• 5" X 4" Christmas Stocking Hoop
  
• 6” Radius hat hoop for sides and backs of hats and caps
  
• 7" X 5" Attache case hoop
  
• 7"X 7" Deep Bag HOOP
  
  Key Benefits:
  
• Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
  
• Relief from carpel tunnel
  
• Excellent repeatability, great for multi head operations
  
  Please note: Since this is not a Brother built product, PR1000 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
  
  
  Fast Frames is a hoop less embroidery frame.
  Stick on backing is placed on the underside.
  The adhesive backing is exposed in the open sew space of the frame.
  Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment).
  Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example).
  
  Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape.
  
  The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
  
  

  Click HERE for Fast Frames Instructions
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes). Brother machines do not recognize Fast Frames on screen so it assumes it is the largest width 12".

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

Military Name Tape Fast Frames FULL FRAME (no 7 in 1 Exchange Needed) 101-014. Mounts on regular arms that come with your embroidery machine, does not require special arms from Fast Frames.

Fast Frames Military Name Tape Embroidery Hoop is the perfect hoop for embroidering names on ribbon or tape. The Fast Frames Military Name Tape Embroidery Hoop is a high quality stainless and aluminum embroidery frame for hoopless embroidery. This Fast Frames Military Name Tape Embroidery Hoop is not for single needle home embroidery machines.

Fast Frames Military Name Tape Embroidery Hoop benefits:

• Cuts your hooping time down to two seconds.
  
• Relieves carpel tunnel.
  
• Helps achieve excellent repeatability.
  
• Great for multi head operations.
  
  Fits on:
  
• Brother PR-600, PR-600II, PR-620
  
• Entrepreneur PR-650
  
• Entrepreneur Pro PR-1000
  
• Baby Lock Embroidery Professional BMP6, BMP8
  
• Embroidery Professional Plus BMP9
  
• Enterprise BNT10
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
  
  Fast Frames Name Tag Frame Instructions Video. This is a video on how to install A Fast Grames Name Tag Frame
  
  
  
  
  
  
  

Non-US Warranty: 30 days parts and labor.

Karate Belt Fast Frames FULL FRAME (no 7 in 1 Exchange Needed) 101-015 102-015

Fast Frames Karate Belt Embroidery Frame are high quality stainless and aluminum embroidery frames for hoopless embroidery. The Fast Frames Karate Belt Embroidery Frame fit on a tubular hoop holder.These Fast Frames Karate Belt Embroidery Frame are not for single needle home embroidery machines.

Fast Frames Karate Belt Embroidery Frame benefits:

• Cuts your hooping time down to 10 seconds.
  
• Has a 3" x 9" embroidery field.
  
• Relieves carpel tunnel.
  
• Helps achieve excellent repeatability.
  
• Great for multi head operations.
  
  Fast Frames Karate Belt Embroidery Frame will fit on:
  
• Brother PR-600, PR-600II, PR-620.
  
• Entrepreneur PR-650.
  
• Entrepreneur Pro PR-1000.
  
• Baby Lock Embroidery Professional BMP6, BMP8.
  
• Babylock Embroidery Professional Plus BMP9.
  
• Enterprise BNT10.
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.
  
  Fast Frames Karate and Belt Frame (not for Dog Collars unless very long) Instructions
  
  
  

Non-US Warranty: 30 days parts and labor.

This frame is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).

NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Non-US Warranty: 30 days parts and labor.

Single piece hoops use sticky adhesive stabilizer backing on bottom, for ease in placement of garment on top of hoop, without having to force fabric into a hoop. Saves time!

Fast Frames 7in1 comes with 1 hoop holder arm, plus 6 sizes of single tubular hoop frames for using adhesive spray or sticky back stabilizers on bottom to hold the fabric in place. This set comes with:

The hoop attachment holding arm for PRS100 Persona Series, plus:

• 2" X 4" Mono Hoop
  
• 2.5" X 4" Pocket Hoop
  
• 3" X 4" Pocket Hoop
  
• 5" X 4" Christmas Stocking Hoop
  
• 6” Radius hat hoop for sides and backs of hats and caps
  
• 7" X 5" Attache case hoop
  
• 7"X 7" Deep Bag HOOP
  
  Key Benefits:
  
• Cut your hooping time down to 5 seconds, relief from carpel tunnel, and achieve excellent repeatability.
  
• Relief from carpel tunnel
  
• Excellent repeatability, great for multi head operations
  
  Please note: Since this is not a Brother built product, PRS100 Series machines will not recognize the frame size on the LCD Screen. Therefore, you will need to position designs properly to avoid needles or foot from hitting the edges of the frames. (do trial tracing test in layout)
  
  Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. ..Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.
  
  

  Click HERE for Fast Frames Instructions
  
  NOTE: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.