• 14 lessons from Serger basics and threading a machine to doing a Rolled Hem finish and using a Flatlock stitch.
  
• Over 10 projects including a pillowcase, tote bag, place mat & napkin set, & sew much more.
  
• Free with registration of your machine. Valid starting Nov 3rd, 2022, while supplies lasts.
  
  To get access to the class:
  
• You must register your machine on Brother USA
  
• You must opt in for emails
  
• Once registered you will receive an email from Brother with access to the Angela Wolf Masterclass
  *Class free with the registration of the Airflow 3000 machine. Offer available with the purchase of the Airflow 3000 machine from November 3rd, 2022, while supplies last.
  
  

• 14 lessons from Serger basics and threading a machine to doing a Rolled Hem finish and using a Flatlock stitch.
  
• Over 10 projects including a pillowcase, tote bag, place mat & napkin set, & sew much more.
  
• Free with registration of your machine. Valid starting Nov 3rd, 2022, while supplies lasts.
  
  To get access to the class:
  
• You must register your machine on Brother USA
  
• You must opt in for emails
  
• Once registered you will receive an email from Brother with access to the Angela Wolf Masterclass
  *Class free with the registration of the Airflow 3000 machine. Offer available with the purchase of the Airflow 3000 machine from November 3rd, 2022, while supplies last.
  
  

• Snip seam thread tails to 2 1/2in.
  
• Slip Hookey blade into the serger seam 1/2in or more from seam end.
  
• Hook the thread tails near ends.
  
• Pull thread tails into the seam with hook slightly rotated toward fabric.
  
• Unhook secured thread tails and clip.
  
  
  
  
  
  

• Fit on Brother 1034D and 925D Sergers
  
• Piping Application Foot
  
• Pearl/Bead/Sequin Foot
  
• Elastic Application Foot
  
• Gathering/Shirring/Ruffling Foot

Organ Needles are Chrome Plated (Finish).
Organ no longer labels “CF” Chrome Finish or “CP” Chrome Plate because that is the “default” finish for Organ Needles.
The same is true for Groz Beckert & Schmetz as they too don’t label all of their needles “CF” either.
Rest assured that if the needles are not “PD”(titanium), “CS”, “LP”, “HP”(non-stick), they are shiney Chrome by default. Organ

Organ Needles are Chrome Plated (Finish).
Organ no longer labels “CF” Chrome Finish or “CP” Chrome Plate because that is the “default” finish for Organ Needles.
The same is true for Groz Beckert & Schmetz as they too don’t label all of their needles “CF” either.
Rest assured that if the needles are not “PD”(titanium), “CS”, “LP”, “HP”(non-stick), they are shiney Chrome by default. Organ

• SA feet include Piping foot, Pearl/Bead/Sequin Foot, Elastic Metering Foot, Gathering Shirring Foot, and Replacement Blind Hem Foot.
  
• Fits Brother 900 Series, 1034D, 1134D, 1634D 3034D, 4234DT, 5234PRW, PL2100 Sergers

• Fits on Brother 1034D and 925D Sergers
  
• Serger Pearl Sequins Foot
  To attach pearls and sequins up to 5mm in diameter to fabric.
  
• Accommodates a 3 mm or 5 mm diameter strand of pearls, beads or sequing. Use this handy guide to serge cording or sequins to the edge of netting, lace, or any other fabric (great for stretch fabrics

• Fits on Brother 1034D, 925D, and any other snap on ankle/shank Brother sergers.
  
• Serger Piping Foot
  
  For sewing and piping two fabrics together.
  
• Accurately places piping within fabric seams for attractive and durable finishing. Interior seams can be finished with a three or four-thread overlock stitch.
  
  
  
  
  
  
  
  

• Fits on Brother 1034D and 925D Sergers
  
• Serger Elastic Application Foot
  To attach tapes and elastic to stretch fabrics up to 12mm in width.
  
• Automatically stretches and guides 6 mm to 12 mm wide elastic as you serge.
  
• This foot will also guide and serge narrow tapes and ribbons, without stretching.
  
  

• Fits on Brother 1034D and 925D Sergers
  
• Serger Gathering Foot
  For gathering and sewing in one operation.
  
• Gathers one layer of fabric to create beautiful ruffles to be applied later or gathers one layer of fabric to another flat layer while serging and finishing the seam edge of both in one easy step.

• Easy two or three-thread blind hemming can be accomplished using this foot to guide folded fabric for perfect blindhems.
  
• Snap-on Metal with plastic adjustable Guide Easy two or three-thread blind hemming can be accomplished using this foot to guide folded fabric for perfect blind hems.
  
  for Brother 900 Series
  1034D
  1134DW
  3034D
  2100D
  4234DT
  5234PRW
  
  Finish your hems professionally with the easy-to-use Blind Hem foot. This foot creates the same invisible hem seen on ready-made dress pants, skirts, dresses, and even curtains. Simply install the foot, switch to a blind hem stitch, and line up your fold with the white guide bar.
  
  Guaranteed to fit Brother Serger Models:
  1034D, 1034DAV, 1034DX, 1134D, 1134DW, 1634D, 2034D, 3034D, 3234D, 3234DT, 4234D, 4234DT, 5234PRW, 526, 526D, 546, 546D, 626D, 634D, 640D, 730DE, 760DE, 834DP, 920D, 925D, 929D, 934D, 935D, 9700LD, PL1050, PL1500, PL1600, PL2000, SB3734T Simplicity, ST4031HD Strong and Tough
  
  Guaranteed to fit Husqvarna Viking Serger Models:
  535D, 560ED, S800, S900
  
  Alternate Part Numbers: X76590002
  
  Snap-On SergerBlindhem (Blind Stitch) Foot

• SA221CV Hemming Set
  
• SA222CV Bias Tape Holder
  
• SA223 Belt Loop Set
  
• SA224CV Bias Tape Binding Set
  
• SA225 Double Fold binder Foot
  
• SA226 Top Stitching Set
  
  
  
  
  Brother 2340CV Cover Stitch Machine - Removing Fabric Tutorial. This tutorial will show you how to remove the fabric from your Brother 2340CV Cover Stitch machine. This can be a somewhat challenging task at first, so I hope this video helps. For more information or to ask me any questions, please visit my blog at http://www.sewilluminated.com. Thank you!
  
  
  Click HERE for Instructions on Coverstitching or Hemming over Serged Seams from Gigi Sews at BehindTheSeams. Wordpress.com

• SA221CV Hemming Set
  
• SA222CV Bias Tape Holder
  
• SA223 Belt Loop Set
  
• 
  
  
  
  
  
  Click HERE for Instructions on Coverstitching or Hemming over Serged Seams from Gigi Sews at BehindTheSeams. Wordpress.com

• Hemming set to make single or double fold hems.
  
• Use to quickly and easily hem garments, table runners or other home dec projects. The hem guide sews straight even hems on your cover stitch machine.
  
  
  
  
  Click HERE for Instructions on Coverstitching or Hemming over Serged Seams from Gigi Sews at BehindTheSeams. Wordpress.com

• Bias Tape Holder for folding and attaching 12 mm (1/2") wide bias tapes.
  
• Use ready-made single fold bias tape (or make your own) to cover stitch over seams for decorative techniques or for making belt loops.
  
• Try using decorative threads in the looper to create decorative bias strips for pin weaving.
  
  
  
  
  

• Belt Loop Set to make belt loops or straps of 11 mm (1/2") wide.
  
• Make belt loops quickly and easily using the belt loop guide on your machine.
  
  

• SA221CV, SA222CV and SA223CV which are available for current 2340CV can be used for both CV3440 and CV3550.
  
• Current SA224CV will converted to SA230CV exclusively for new cover stitch models.
  
• And SA231CV will be established exclusively for new cover stitch models CV3440 and CV3550.

• Bias Tape Binding Set for folding and attaching 6 mm (1/4") or 12 mm (1/2") bias tapes to fabric edge.
  
• There are two sets of bias binders to accommodate both narrow and wide ready-made bias tape. (or make your own).
  
• Narrow: finished width of 6mm (1/4")
  
• Wide: finished width of 12mm (1/2")
  
• Use either size to quickly and easily attach bias tape to the edge of your garment or home dec project.
  
  
  
  
  
• SA221CV, SA222CV and SA223CV which are available for current 2340CV can be used for both CV3440 and CV3550.
  
• Current SA224CV will converted to SA230CV exclusively for new cover stitch models.
  
• And SA231CV will be established exclusively for new cover stitch models CV3440 and CV3550.

• SA221CV, SA222CV and SA223CV which are available for current 2340CV can be used for both CV3440 and CV3550.
  
• Current SA224CV will converted to SA230CV exclusively for new cover stitch models.
  
• And SA231CV will be established exclusively for new cover stitch models CV3440 and CV3550.

• SA221CV, SA222CV and SA223CV which are available for current 2340CV can be used for both CV3440 and CV3550 Machines.
  
• Current SA224CV will converted to SA230CV exclusively for new cover stitch models.
  
• And SA231CV will be established exclusively for new cover stitch models CV3440 and CV3550.
  
  
• Double Fold Binder Foot for making and attaching 12 mm (1/2") tape on top and bottom in one operation.
  
• The binder can be used to create 42mm (approx. 1-21/32") or 40mm (approx. 1-19/32") width raw fabric bias strip into double folded tape with a finished width of 12mm (approx 1/2") on top and bottom, and you can quickly and easily sew it onto the edge of the fabric.
  
  Serge and turn fabric edges for perfect bias binding with sized tools for consistent and professional finish. For Use With: 2340CV Double Fold Binder
  Attaches 12 mm (approx. 1/2 inch) wide fabric tape as making it by folding 40 or 42 mm (approx. 1-1/2 inches) wide fabric.
  
  
• Prepare a 40/42 mm (approx. 1-1/2” inches) wide fabric binding tape.
  
• Attach TB presser foot included with the machine.
  
• Set the fabric tape through the folding binder, and set it under the presser foot.
  
• Pull the fabric tape behind the presser foot.
  
  
  
  
  

• SA221CV, SA222CV and SA223CV which are available for current 2340CV can be used for both CV3440 and CV3550.
  
• Current SA224CV will converted to SA230CV exclusively for new cover stitch models.
  
• And SA231CV will be established exclusively for new cover stitch models CV3440 and CV3550.
  
  
• Top Stitching Set for decorative top stitching.
  
• Use this presser foot to easily apply top stitching as with 6mm (15/64") or 3mm (1/8") width 2-needle 3-thread cover stitch at the seam margin with lock stitches.
  
  

• Acrylic Platform
  
• Adjustable Height Legs
  
• Custom Fit Portable Freearm Flatbed, for Sewing, Embroidery, Quilting, Serger and BlindStitch Portable Machines.
  
• 1 year warranty.
  
  Note: Custom Made to Fit Around the Freearm or Flatbed Surface of Your Brand and Model Sewing, Embroidery and Serger Machines. If your sewing machine drop in bobbin (top load) cover (applies to metal covers not to plastic covers) does not come straight up and off the needle plate (if it slides toward the operator) or if your bobbin case is underneath the top of the arm (front load), you will need to remove the extension table to replace a bobbin.
  
  Sew Steady Tables are Custom Made to Fit your Model Like a Glove! Do you really need or have the extra space for a full sized cabinet with drawers? Or just more working surface around your machine?
  
  The Sew Steady Portable Table extends the sewing surface area of your table top sewing machine. It supports fabric for even stitch quality. Tight fitting NO GAP design since tables are specific to machine model. It has easily adjustable snap-on-off legs for easy storage and travel.
  
  A flat sewing surface provides you with the most control when sewing. If you don't have your machine mounted in a cabinet, using a Sew Steady Portable Table is the next best thing. Take it to class so you have a flat surface there, too. Adjustable legs can be removed for transport and storage. Each table is custom cut from 1/4" Plexiglas to fit your particular machine.
  
  
• Extension Table For Sewing, Embroidery Or Quilting
  
• Available In Five Sizes!
  
• Junior, Serger, Large & Big Tables include a permanent inches and metric ruler printed on the underside of the table. Giant tables come with 2 cling rulers which adhere to the underside.
  
• Large, Big and Giant sizes also include a movable extra support leg
  
• Large table works with tiltables
  
• Rounded front edge for comfort
  
• Use it as a light box and easy underneath storage
  
• High Quality Acrylic Construction
  
• Specify To Fit Around Freearm Or Embroidery Unit
  
• The Sew Steady table is built-to-order to fit your specific machine. Please allow 2-5 weeks before shipping and expect a delivery time of 5-7 days. It is well worth the wait!
  
  Demonstration video, showing table leg installation process:
  
  
  
  Acrylic Table for Top Loading Bobbin Sewing Machine
  
  

• Features include no-spill latches sturdy hinges and dividers for additional compartment capabilities
  
• Great for scrapbooking crafts art supplies home office and more
  
• Ideal for use in organizer totes
  
• Translucent storage box.
  
• Hinged lid with locking no spill latch tabs
  
• Made of sturdy plastic
  
  

• stays put
  
• no more fumbling
  
• durable velcro
  
• supplied sponge rubber pad to hold even on smooth surfaces such as tile, concrete, hardwood and ceramic
  
• fits all portable foot pedals
  
• pedal fastens securely with durable velcro
  
• top grade vinyl for years of rugged use
  
• 4" x 4" sponge rubber underneath the Pedal-Sta II
  
• included velcro strips