"Absolutely best selection of sewing machine needles anywhere!!" Jean R, Facebook
How often should I replace my sewing needles?
Machine needles should be replaced after a maximum sewing time of 8 hours. Replace needles more frequently when sewing synthetic fabric, appliqués or machine embroidery. This will avoid skipped stitches, fabric pulls and frayed threads. Machine needles are designed to break or shear off for the protection of the sewing machine hook mechanism, bobbin case, presser foot, or needle plate. If a needle bends or burrs, do not sew with it. When a machine needle breaks, it is a warning to check the following:
~The needle type and size is correct?
~Is the thread too thick or unsuitable for the needle size and application?
~Is the upper thread feeding freely?
~Are the thread tensions set too tight?
~Does the machine need cleaning?
~Is the correct presser foot fitted?
~Is the correct sewing technique being used?
~Is the fabric being pulled, pushed or dragged during sewing?
~Twin needles usually break due to excessive heat build up. Reduce speeds and avoid prolonged usage.
Thread breakage can be caused by resistance of thread going through the needle eye/size. A good rule of thumb is that thread should not take up more than 1/2 the space of or in the needle eye depending on thread texture. Thread a needle in your hand and let the needle slide down over the length of the thread. If there is too much resistance, it may show up as broken thread due to heat built up in higher speed sewing and/or just restriction and resistance in the needle eye which can cause thread to shred and break. There can be many more reasons for thread shredding and breaking, other than just matching correct needle eye size to thread size. The needle is not a permanent machine part. Needles get dull from use. Needles are meant to be changed. Clues to Changing the Needle
- Shredding or broken threads -
- Skipped stitches -
- Puckered or damaged fabrics -
- Wiggly squiggly seams -
- Popping, clicking or clunking sound -
32367: Amazing Push In Needle Threader 9100 for Sewing, Embroidery, Serger Machines |
Our Price: $12.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Easily threads sewing machine and serger needles. Comes with handy storage tube that protects the threader.
NEW Type Sewing Machine Needle ThreaderThis video shows how to use the newer type sewing machine needle threader, its really simple to use.
Non-US Warranty: 30 days parts and labor.
|
Our Price: $599.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
This optional free-motion quilting kit enables you to add free hand stippling designs to quilts and create your own free hand sewing designs and artwork. This optional Brother PRSFMK1 Free Motion Kit for PRS100 Persona free-motion quilting kit enables you to add free hand stippling designs to quilts and create your own free hand sewing designs and artwork. Do freemotion quilting and personal artwork with the Brother PRSFMK1 Free Motion Kit for PRS100 Persona.
For use with: Brother Persona PRS100 and Babylock Alliance BNAL Single Needle Embroidery Machines Only.
PRS100 Free Motion Kit Accessory. This optional free-motion quilting kit enables you to add free hand stippling designs to quilts and create your own free hand sewing designs and artwork.
*Brother PRS100 Activate the Free Motion Mode. Instruction:
1. Go to Brother support website download the update for PRS100.
2. Update your PRS100 software. (Please Note: New needle guard cover included automatically activates the Free Motion mode, so you don't have to use these tests)
Brother PRS100 Free Motion Mode test.
*Brother PRSFMK1C Free Motion Kit Installation. Brother PRS100 Persona (same as Europe Brother VR) embroidery Machine Free Motion Kit (PRSFMK1C) Insatllation. The video that contains a song playing in the background on a radio so we removed the sound track.
Non-US Warranty: 30 days parts and labor.
DIME B3662 Truimph EBBR Embroidery Needles Flat Shank Sampler Pack 100 (version 2) |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
What is it? Assortment of 8 different needle types. All needles are the long eye type – called EBBR in sizes above 9/65.
Sizes above 9/65 are compatible with all automatic threading systems, including multi-needle.
Why does someone need it? The assortment assures that an embroiderer always has the correct needle for any fabric
or project.
Who would buy it? Dealers buy it to sell to hobbyist embroiderers. Works with all machines – single- and multi-needle
that use flat shank needles.
How do you use it? Use as any other needle, following the recommendations for needle selection in our Needle
Information Sheet.
Contents: 100 needles as follows:
Non-US Warranty: 30 days parts and labor.
84426: Dritz D253 Machine Needle Inserter and Needle Threader - Pack of 3 |
Our Price: $29.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Holds needle for insertion and removal from machine. Inserter reduces eye strain and threads needles quickly.
Non-US Warranty: 30 days parts and labor.
84426: Dritz D253 Machine Needle Inserter and Needle Threader - Pack of 3 |
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
|
Features
Holds needle for insertion and removal from machine. Inserter reduces eye strain and threads needles quickly.
Non-US Warranty: 30 days parts and labor.
87099: Dritz D812 3 Storage Tubes for up to 20 Needles, with Labels |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Storage tubes hold needles up to 2.25in (5.7cm) in length.
Non-US Warranty: 30 days parts and labor.
Specifications
Internal magnet brings needles to the top; holds and fans them out for easy selection. One 20 count package of needles will fit in a single tube. Includes 33 clear labels for all types and sizes of needles.
3 count per individual package.
93722: Groz-Beckert DBXK5 GROZ-EMB09 Commercial Embroidery Machine Needles GB Emb Size 65/09 pkg/10 |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
This are round shank needles for commerical embroidery machines.
Non-US Warranty: 30 days parts and labor.
Specifications
System DBXK5 - Bernina E16
Point Style: RG
Needle Size: 65 / 9
Coating: Chromium
Length, butt to eye: 339
Shank diameter: 163
93726: Groz-Beckert DBXK5 GROZ-EMB11 Commercial Embroidery Machine Needles GB Emb Size 75/11 pkg/10 |
Our Price: $11.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
These are round shank needles made for commerical embroidery machines.
Non-US Warranty: 30 days parts and labor.
Specifications
System DBXK5 SAN 1. System DBXK5 SAN 1 titanium needle. Size 12/80 sold in a package of 10 needles. - Bernina E16
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
|
Our Price: $12.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
Quick easy Needle Threader/Needle Inserter part no.200347008
An ideal accessory for easier threading of your sewing machine needles.
One end of this handy threader has a hook which enables easier threading. The other end has a hole which you can drop your needle into making it easier to hold it whilst you insert it into your machine.
Non-US Warranty: 30 days parts and labor.
61835: OESD Organ 6684 Titanium Embroidery Needles Sharps sz75/11, 10 PK |
Our Price: $16.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Systems: 15x1, HAx1, 130/705H, SY2020, SY2031, 206x15, PFx130. These needles have a flat side ground on the shank to assure proper alignment with the point of the hook. (Intended only for machines designed for Flat Shank needles). This is the standard needle with a flat shank and regular sized eye for use with most home sewing machines and home sewer based embroidery and quilting machines. Regular Point. For machines by: Bernina, Brother, Elna, Husqvarna, Janome, Juki, Melco, Necchi, Baby Lock, New Home, Pfaff, Poem, Riccar, Simplicity, Singer, Viking, White & more. Titanium Nitride finish allows them to maintain their original shape and dimensions 3 to 5 times longer than other needles. 10 needles per package. Sold by the package.
Non-US Warranty: 30 days parts and labor.
54806: OESD Organ 6687 Titanium Ball Point Embroidery Needles 15x1 HAx1 sz75/11, 10 PK |
Our Price: $16.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Large eye for embroidery. Titanium for long life. Ball point, 10 needles per pack. OESD
Non-US Warranty: 30 days parts and labor.
|
Our Price: $49.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
Brother has changed to manufacturing, sewing in, including and servicing all embroidery only and sewing machines combinations using Organ HAX130EBBR embroidery needles exclusively. We are no longer recommending any other needle system for these machines. Not just HAx130EBBR for the PR and Babylock multi needle machines as have been our recommendation in the past. John Douthat.
Size 11 Organ HAx130EBBR or HAX130EB Needles recommended for all embroidery because the smaller needle is better for dense embroidery. Size 14 only for thicker, dense fabrics
These Chrome Coated Needles also For Brother PR600, PR650, PR655, PR1000, PR1000E, Babylock Professional EMP6, BMP8, BMP9, ENT10, BNT10 Multi Needle Embroidery Machines
HAx130EBBR for Babylock (EMP6, BMP8, BMP9, ENT10) and Brother (PR600, PR-600C, PR620, PR650, PR-1000) Flat Shank- Light Ball Point, Reinforced Blade, Oversized Eye.
Organ now has an embroidery needle in 5 different sizes for the new Brother PR600, PR620, PR650 6-Needle Embroidery Machines which are the same as Babylock EMP6 BMP8 embroidery professional machines.
In co-operation with The Brother Group of Nagoya, Japan; Organ Needles has developed needle type HAx130EBBR in size 75 (11) for the Brother domestic embroidery machine PR600 PR620, PR650, PR1000(also works for Baby Lock EMP6 and BMP6, BMP8, BMP 9, ENT10, BNT10).
- Larger eye (suitable for the use of extra thick embroidery yarn).
- Larger scarf for better creation of the loop and for prevention of skipped stitches. The blade is double swaged.
- The needle has a Chromium finish.
- Especially hardened for high performance sewing. Extremely tight tolerances in the eye section.
Only the use of HAx130 EBBR offers high performance and excellent needle efficiency when using the Brother PR600-PR1000/E. When auto-threading the reliability of HAx130 EBBR is indispensable.
These needles were developed for use in the Brother Professional 6 Needle Machines (PR600, PR 600 II, PR620, PR650, PR655/E) and the Babylock Professional 6 Needle Embroidery Machines (EMP6, BMP8, BMP9, BNT10). They also work in the new Brother PR1000 and Baby Lock ENT10 machines. Although they are flat shank needles, they are built to industrial standards with a reinforced blade, oversize eye and a light ball point. Both Brother and Babylock recommend using these needles to insure that your embroidery machine works correctly.
Non-US Warranty: 30 days parts and labor.
Specifications
The HAx130EBBR is intended for new BROTHER PR and Babylock embroidery machines in which the machine automatically threads the needles. The HAx130EBBR is made to a higher level of accuracy (tighter dimensional variations) due to the precision needs of the machine for automatic threading of the needles.
You can use the HAx130EBBR in all embroidery machines even though the level of dimensional tolerances is not necessary for other machines. Organ Needle Company
HAX130EBBR was specially made by Organ for Brother. Besides the oversized eye the significant feature has to do with tighter tolerances. The intended machine “self-threads” itself so tolerances must be very tight. The reinforced blade helps to achieve that goal. Brother only wanted to offer these in 11/75 only but we had Organ make them in 9/65,10/70,12/80, & 14/90 in addition to the 11/75. Diamond Organ NYC
HAx130EBBR:
This needle was developed for use in Brother model PR-600, Babylock EMB6, and 10-needle embroidery machines. It is an industrial quality needle with a flat shank, reinforced blade, light ball point, an oversized eye, and hard chrome finish.
This needle is available in sizes #9/65, #10/70, #11/75, #12/80, and #14/90.
Further information about HAx130EBBR: HAX130EBBR was specially made by Organ for Brother. Besides the oversized eye the significant feature has to do with tighter tolerances. The intended machine “self-threads” itself so tolerances must be very tight. The reinforced blade helps to achieve that goal. Diamond Organ NYC
|
Our Price: $199.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 5-7 business days.
Condition: New In Box
|
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy Texmac, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc. Specify Size 11*
Needle Comparison Chart
- Available in sizes 8, 9, 10, 11, 12, 14, 16, 18, 19, 20
- These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles whice home embroidery machines require.
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Organ 15x1ST HAx1ST SAEMB7511 100pk Chrome Embroidery Flat Shank Needles with Larger Eye for Home Machines, Retail Store |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
*Size 11 (or 11BP Ball Point for Knits) Recommended for Embroidery Machines. Interchangeable with Schmetz 130705H-E Embroidery Needles, and Singer Style 2000 Chromium Needles. For all home sewing embroidery machines with flat shank needles.
Needle Selection Guide
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
Organ Needles are Chrome Plated (Finish).
Organ no longer labels “CF” Chrome Finish or “CP” Chrome Plate because that is the “default” finish for Organ Needles.
The same is true for Groz Beckert & Schmetz as they too don’t label all of their needles “CF” either.
Rest assured that if the needles are not “PD”(titanium), “CS”, “LP”, “HP”(non-stick), they are shiney Chrome by default. Organ
Also For Use With: DreamCreator XE VM5100, DreamWeaver XE VM6200D, LB6770, LB6770 PRW, Quattro 2 6700D, Quattro 3 Trilogy Limited Edition Innov-ís 6750D, Quattro NV6000D, The Dream Machine XV8500D, The Dream Machine 2 XV8550D, Luminaire XP1, Luminaire 2 XP2
2039: Organ 15x1ST HAx1ST SAEMB7511 100pk Chrome Embroidery Machine Needles Retail Store |
Our Price: $54.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the same business day.
Condition: New In Box
|
Features
Size 11 or 11BP Ball Point Recommended. 70 % off individual needle prices for Organ 15x1ST in packs of 10. Size 75/11 (same as Janome Blue Tip) 80/12 or 90/14 (same as Red Tip)
Non-US Warranty: 30 days parts and labor.
Specifications
Organ Needles are Chrome Plated (Finish).
Organ no longer labels “CF” Chrome Finish or “CP” Chrome Plate because that is the “default” finish for Organ Needles.
The same is true for Groz Beckert & Schmetz as they too don’t label all of their needles “CF” either.
Rest assured that if the needles are not “PD”(titanium), “CS”, “LP”, “HP”(non-stick), they are shiney Chrome by default. Organ
|
Our Price: $69.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
The 15X1ST PD are the same as the Schmetz 130/705H-ET #11, Same as (Schmetz 705H-E), Flat Shank, Larger Eye, Titanium Coating make Needles Lasts 3-5 Times Longer than Chrome or Nickel, for Home Embroidery Machines Only.
In reality the 15x1ST BP PD is closer to the HAX130EBBR #11 as all of the EBBR have a light ball point.
*Save 40% or 40¢ Off Each $1+ Needle Regular Price, Organ 15x1ST/PD Pack of 5, Size 11 for Brother, Babylock, Bernina, Elna, Janome, Sears Kenmore, Singer, White, Bernina-DECO, Pfaff, Viking
- The very best machine embroidery needles for home machines. Because of the Titanium coating the needles will last longer with less wear from thread and fabric.
- Especially good for metallic threads because the Titanium coating in the needle eye reduces wear.
Needle Selection Guide
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
|
Our Price: $39.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box
|
Features
Compare Schmetz Leather Needles, Wedge Shape Point Slices Rather than Punches Round Hole, Flat Shank for Home Sewing Machines, 100 Loose
Flat Shank Leather Point Needles for Home Sewing Machines with "wedge" point for sewing leather, vinyl, plastic and similar materials.
Please Specify One Size 11, 14, 16 or 18
Needle Selection Guide
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
Leather point needles "slice" through the leather-like materials while making a cleanly cut needle hole. A standard "set" or "sharp" point needle punches it's way through leather like materials which may make irregularly or undesirably shaped needle holes. The leather point "slices" through the leather like materials while making a a cleanly cut needle hole.
61836: Organ #6685 Titanium 10PK Embroidery Machine Needles Sharp Point, Size 12/80 for 15x1, HAx1, 130/705H, SY2020, SY2031, 206x15, PFx130 |
Our Price: $19.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Organ Embroidery Titanium sz 12/80
OESD
Systems: 15x1, HAx1, 130/705H, SY2020, SY2031, 206x15, PFx130. These needles have a flat side ground on the shank to assure proper alignment with the point of the hook. (Intended only for machines designed for Flat Shank needles). This is the standard needle with a flat shank and regular sized eye for use with most home sewing machines and home sewer based embroidery and quilting machines. Regular Point. For machines by: Bernina, Brother, Elna, Husqvarna, Janome, Juki, Melco, Necchi, Baby Lock, New Home, Pfaff, Poem, Riccar, Simplicity, Singer, Viking, White & more. Titanium Nitride finish allows them to maintain their original shape and dimensions 3 to 5 times longer than other needles. 10 needles per package. Sold by the package.
Non-US Warranty: 30 days parts and labor.
Organ 134S Leather Needles 100 / 16 Chromium For Industrial Sewing Machines |
Our Price: $35.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Available in needle sizes 100/16, 110/18, 120/19, 125/20, 130/21, 140/22, 160/23, and 90/14.
Non-US Warranty: 30 days parts and labor.
Specifications
NEEDLE SYSTEMS: _
FINISH: Chromium
POINT STYLE: Narrow Coss Point
Point Symbol: SS | NCR
61837: Organ 6686 Embroidery Titanium Needles 15x1 HAx1 Sharps 14/90 10 PK |
Our Price: $59.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Organ 6686 Embroidery Titanium Needles 15x1 HAx1 Sharps 14/90 100 PK
Non-US Warranty: 30 days parts and labor.
61833: Organ 6692 Embroidery Machine Needles 15x1 HAx1 Sharps 80/12 10Pk |
Our Price: $10.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
For embroidery and sewing on medium to heavy weight fabrics such as chambray, trigger or similar fabrics. 10 needles per pack. OESD
Non-US Warranty: 30 days parts and labor.
54805: Organ 6697 Embroidery Ball Point Needles HAx1 15x1 STBP Size 90/14, 10 PK |
Our Price: $8.99 Prices are subject to change, and only current prices will be honored.
Availability: Retail Store Only
Condition: New In Box
|
Features
Organ 6697 Embroidery Ball Point Needles HAx1 15x1 STBP Size 90/14, 10 PK
Non-US Warranty: 30 days parts and labor.
89666: Organ 6831-11 Embroidery Needles Ball Point 11/75 10/pk |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Special version for embroidery and decorative stitching.
Non-US Warranty: 30 days parts and labor.
Specifications
It has an oversized eye to reduce stress and tension on the thread. It also accomodates metallic threads or heavier topstitching threads and makes needle threading easier.
89666: Organ 6831-11 Embroidery Needles Ball Point 11/75 10/pk |
Our Price: $8.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
|
Features
Special version for embroidery and decorative stitching.
Non-US Warranty: 30 days parts and labor.
Specifications
It has an oversized eye to reduce stress and tension on the thread. It also accommodates metallic threads or heavier topstitching threads and makes needle threading easier.
10 needles per package.
|
Availability: Usually leaves the warehouse in 2-3 business days.
|
Features
Special version for embroidery and decorative stitching.
Non-US Warranty: 30 days parts and labor.
Specifications
It has an oversized eye to reduce stress and tension on the thread. It also accommodates metallic threads or heavier topstitching threads and makes needle threading easier.
10 needles per package.
|
Availability: Usually leaves the warehouse in 2-3 business days.
|
Features
John James Heavy Embroidery Needles Size Assorted 14. Heavy Embroidery needles are not actually heavy to use. However, they are the largest needle of the Embroidery sewing needle family. Typically they are used when working with twisted yarn in the art of crewel embroidery, for example yarn embroidery on a chunky sweater. This pack contains 2 heavy embroidery needles, both a size 14, one pointed and one with a round blunt point. Usage will depend on the openness of the fabric. 2 needles per package
Non-US Warranty: 30 days parts and labor.
|
Our Price: $8.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
|
Features
Special version for embroidery and decorative stitching.
Non-US Warranty: 30 days parts and labor.
Specifications
It has an oversized eye to reduce stress and tension on the thread. It also accommodates metallic threads or heavier topstitching threads and makes needle threading easier.
10 needles per package.
|
Availability: Retail Store Only
|
Features
Non-US Warranty: 30 days parts and labor.
Specifications
10 needles per package.
|
Availability: Retail Store Only
Condition: New In Box
|
Features
Non-US Warranty: 30 days parts and labor.
Specifications
5 needles per package.
|
Our Price: $29.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 3-4 business days.
Condition: New In Box
|
Features
DB-K5 CS: The Cool-Sew finish was developed to alleviate needle problems resulting from the following situations:
1) Heat Buildup in penetration of synthetic, chemically treated, or very dense materials
2) Materials or residue sticking to needle surface or in eye
3) Excessive sewing thread breakage due to friction in the needle eye
The COOL-SEW finish needle’s surfaces, even in the eye, are resistant to sticking. Its non-stick finish has a very low friction coefficient which prevents excessive heat buildup and its resulting problems. Few, if any, materials stick to the surfaces of Cool-Sew needles.
When COOL-SEW needles are used under conditions described above you can expect neater stitches, less sewing thread breakage, less puckered stitches, less downtime, less defects, and increased productivity.
COOL-SEW needles are ideal for sewing through vinyl, synthetics, chemically treated materials, glued materials, rubberized goods, nylon, foam, dense materials, and with synthetic threads.
Embroidery needles on this page are round shank needles
for commercial/industrial embroidery machines only.
This embroidery needle is designed especially for industrial /commercial embroidery machines such as Tajima, SWF, Barudan, etc. The DB-K5 needle has a one size larger eye than that found in a regular needle. Unlike sewing thread used for general apparel sewing, embroidery threads are "fluffier" and have less tensile strength. A larger needle eye, without increased blade diameter, allows the embroidery thread to pass easily through the needle's eye without fraying or snapping
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
|
Our Price: $32.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc.
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
|
Our Price: $29.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc.
These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles which home embroidery machines require.
- Titanium-nitride ceramic finish
- More wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- Because titanium needles are made of stronger material they will last longer on tougher applications.
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 is standard for all new Brother and Tajima Industrial Embroidery Machines as well as many others. Round Shank (Industrial Needles)
While the needle is the least expensive component in any embroidery or sewing machine, it is the most important. High quality, ORGAN needles designed in cooperation with the machine builders assure maximum performance, quality, and economy.
ORGAN needles are manufactured from special high carbon, silicon rich steel. We use the latest state-of-the-art production techniques to insure high polished eyes for dependable, smoother stitches, consistent quality, and fewer thread breaks.
The Organ Needle Company works closely with all of Japan's sewing machine builders to design and manufacturer needles for optimal performance. A machine builder cannot afford to buy an inferior needle at any price!
|
Our Price: $29.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 1-2 weeks.
Condition: New In Box
|
Features
*Box of 100 For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc. Commercial Multi Needle Embroidery Machines Only.
These are round shank needles only for commercial and industrial embroidery machines, not flat shank needles for home embroidery machines.
- titanium-nitride ceramic finish
- more wear resistant than other needles.
- When embroidering large stitch designs or penetrating very abrasive, dense or tough materials the needle points and surface will maintain its original shape and dimension 3 to 5 times longer.
- because titanium needles are made of stronger material they will last longer on tougher applications.
Needle Comparison Chart
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
|
Our Price: $79.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the same business day.
Condition: New In Box
|
Features
Brother has changed to manufacturing, sewing in, including and servicing all embroidery only and sewing machines combinations using Organ HAX130EBBR embroidery needles exclusively. We are no longer recommending any other needle system for these machines. Not just HAx130EBBR for the PR and Babylock multi needle machines as have been our recommendation in the past. John Douthat.
Size 11 Organ HAx130EBBR or HAX130EB Needles are recommended for all embroidery because the smaller needle is better for dense embroidery. Size 14 only for thicker, dense fabrics.
Also For Brother PR600, PR620, PR650, PR650E, PR655E, PR1000, PR1000E, Babylock EMP6, BMP8, BMP9, ENT10, BNT10, Ships from Baton Rouge Warehouse
HAx130EBBR for Babylock (EMP6, BMP8, BMP9, ENT10) and Brother (PR600, PR-600C, PR620, PR650, PR655, PR-1000) Flat Shank- Light Ball Point, Reinforced Blade, Oversized Eye.
Organ now has an embroidery needle in 5 different sizes for the new Brother PR600, PR620, PR650 6-Needle Embroidery Machines which are the same as Babylock EMP6 BMP8 embroidery professional machines.
In co-operation with The Brother Group of Nagoya, Japan; Organ Needles has developed needle type HAx130EBBR in size 75 (11) for the Brother domestic embroidery machine PR600 PR620, PR650, PR1000(also works for Baby Lock EMP6 and BMP6, BMP8, BMP 9, ENT10, BNT10).
Larger eye (suitable for the use of extra thick embroidery yarn).
- Larger scarf for better creation of the loop and for prevention of skipped stitches. The blade is double swaged.
- The needle has a Chromium finish.
- Especially hardened for high performance sewing. Extremely tight tolerances in the eye section.
Only the use of HAx130 EBBR offers high performance and excellent needle efficiency when using the Brother PR600-PR1000/E. When auto-threading the reliability of HAx130 EBBR is indispensable.
These needles were developed for use in the Brother Professional 6 Needle Machines (PR600, PR 600 II, PR620, PR650, PR655/E) and the Babylock Professional 6 Needle Embroidery Machines (EMP6, BMP8, BMP9, BNT10). They also work in the new Brother PR1000 and Baby Lock ENT10 machines. Although they are flat shank needles, they are built to industrial standards with a reinforced blade, oversize eye and a light ball point. Both Brother and Babylock recommend using these needles to insure that your embroidery machine works correctly.
Non-US Warranty: 30 days parts and labor.
Specifications
HAX130EBBR was specially made by Organ for Brother. Besides the oversized eye the significant feature has to do with tighter tolerances. The intended machine “self-threads” itself so tolerances must be very tight. The reinforced blade helps to achieve that goal. Brother only wanted to offer these in 11/75 only but we had Organ make them in 9/65,10/70,12/80, & 14/90 in addition to the 11/75. Diamond Organ NYC
HAx130EBBR:
This needle was developed for use in Brother model PR-600, Babylock EMB6, and 10-needle embroidery machines. It is an industrial quality needle with a flat shank, reinforced blade, light ball point, an oversized eye, and hard chrome finish.
This needle is available in sizes #9/65, #10/70, #11/75, #12/80, and #14/90.
Further information about HAx130EBBR: HAX130EBBR was specially made by Organ for Brother. Besides the oversized eye the significant feature has to do with tighter tolerances. The intended machine “self-threads” itself so tolerances must be very tight. The reinforced blade helps to achieve that goal. Diamond Organ NYC
64858: Organ HAx130EBBR 75/11 10Pk Chrome Needles All Brother Babylock Embroidery Machines |
Our Price: $7.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
Brother has changed to manufacturing, sewing in, including and servicing all embroidery only and sewing machines combinations using Organ HAX130EBBR embroidery needles exclusively. We are no longer recommending any other needle system for all these machines, not just for the PR multi needle machines. John Douthat.
Size 11 Organ HAx130EBBR or HAX130EB Needles are recommended for all embroidery because the smaller needle is better for dense embroidery. Size 14 only for thicker, dense fabrics.
Also For Brother PR600, PR620, PR650, PR650E, PR655E, PR1000, PR1000E, Babylock EMP6, BMP8, BMP9, ENT10, BNT10, Ships from Baton Rouge Warehouse
HAx130EBBR for Babylock (EMP6, BMP8, BMP9, ENT10) and Brother (PR600, PR-600C, PR620, PR650, PR655, PR-1000) Flat Shank- Light Ball Point, Reinforced Blade, Oversized Eye.
Organ now has an embroidery needle in 5 different sizes for the new Brother PR600, PR620, PR650 6-Needle Embroidery Machines which are the same as Babylock EMP6 BMP8 embroidery professional machines.
In co-operation with The Brother Group of Nagoya, Japan; Organ Needles has developed needle type HAx130EBBR in size 75 (11) for the Brother domestic embroidery machine PR600 PR620, PR650, PR1000(also works for Baby Lock EMP6 and BMP6, BMP8, BMP 9, ENT10, BNT10).
- Larger eye (suitable for the use of extra thick embroidery yarn).
- Larger scarf for better creation of the loop and for prevention of skipped stitches.
The blade is double swaged.
- The needle has a Chromium finish.
- Especially hardened for high performance sewing. Extremely tight tolerances in the eye section.
Only the use of HAx130 EBBR offers high performance and excellent needle efficiency when using the Brother PR600-PR1000. When auto-threading the reliability of HAx130 EBBR is indispensable.
These needles were developed for use in the Brother Professional 6 Needle Machines (PR600, PR 600 II, PR620, PR650, PR655/E) and the Babylock Professional 6 Needle Embroidery Machines (EMP6, BMP8, BMP9, BNT10). They also work in the new Brother PR1000 and Baby Lock ENT10 machines. Although they are flat shank needles, they are built to industrial standards with a reinforced blade, oversize eye and a light ball point. Both Brother and Babylock recommend using these needles to insure that your embroidery machine works correctly.
Non-US Warranty: 30 days parts and labor.
Specifications
HAX130EBBR was specially made by Organ for Brother. Besides the oversized eye the significant feature has to do with tighter tolerances. The intended machine “self-threads” itself so tolerances must be very tight. The reinforced blade helps to achieve that goal. Brother only wanted to offer these in 11/75 only but we had Organ make them in 9/65,10/70,12/80, & 14/90 in addition to the 11/75. Diamond Organ NYC
HAx130EBBR:
This needle was developed for use in Brother model PR-600, Babylock EMB6, and 10-needle embroidery machines. It is an industrial quality needle with a flat shank, reinforced blade, light ball point, an oversized eye, and hard chrome finish.
This needle is available in sizes #9/65, #10/70, #11/75, #12/80, and #14/90.
Further information about HAx130EBBR: HAX130EBBR was specially made by Organ for Brother. Besides the oversized eye the significant feature has to do with tighter tolerances. The intended machine “self-threads” itself so tolerances must be very tight. The reinforced blade helps to achieve that goal. Diamond Organ NYC
|
Our Price: $59.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Flat Shank for Home Sewing and Embroidery Machines, Size 12, 14, 16 for Sewing Specialty Machine Threads (Schmetz 130N Topstitch is Nickel Plated). Also for Heavier or Double Threads used Brother PR600, PR620, PR650, PR655, PR1000 and Babylock Multi Needle Embroidery Machines.
Top Stitch Needles For Home Machines (HAx130N)
This special needle has a very long, almost double length, eye. It is made for Top-Stitching or Decorative stitching and will accept heavy or multiple threads. It can also be used for embroidery with heavy, metallic threads. It is availble in chrome or PD/titanium finish.
Organ Needles are Chrome Plated (Finish).
Organ no longer labels “CF” Chrome Finish or “CP” Chrome Plate because that is the “default” finish for Organ Needles.
The same is true for Groz Beckert & Schmetz as they too don’t label all of their needles “CF” either.
Rest assured that if the needles are not “PD”(titanium), “CS”, “LP”, “HP”(non-stick), they are shiney Chrome by default. Organ
Non-US Warranty: 30 days parts and labor.
Specifications
Schmetz ABC Pocket Guide to Home Sewing Machine Needles 130/705H
Schmetz Needle Guide Sew Schmetz
Schmetz Needle Guide
Schmetz Product Information, The Domestic Sewing Machine Needle
Schmetz All About Needles, Household, Industrial, Overlock
Schmetz Needle Display Module in Stores
Needles - What the Home Sewer Needs to Know by Web of Thread
Metallic Thread Embroidery on a Commercial Embroidery Machine
96240: Organ ORG5117-075 Anti-Glue Embroidery Needles 75/11 Carded, 5ct |
Our Price: $6.29 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Organ Carded Embroidery Anti-Glue Needle Size 75/11 - Sold by the Card - 5 Needles per Card.
Non-US Warranty: 30 days parts and labor.
Specifications
Anti-Glue needles are designed to alleviate problems sewing materials that may be glued, vinyl, synthetics, rubberized and coated fabrics and when using nylon and other synthetic threads.
- Alternative number 5117075BL
|
Our Price: $6.29 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Organ Carded Universal Needle Size 80/12 - Sold by the Card - 10 Needles per Card. For general purpose use on tightly woven materials, linens, suede, etc.
Non-US Warranty: 30 days parts and labor.
Specifications
Alternative number 130/705H, 5110080BL
85746: Quilters Rule QR-COT-L Finger Cots Size Large 10/pkg, Helps Hold Sewing or Hand Needles Between Your Fingers |
Our Price: $5.99 Prices are subject to change, and only current prices will be honored.
Availability: ON BACKORDER
Condition: New In Box
|
Features
Made of a very thin and flexible latex tissue.
Non-US Warranty: 30 days parts and labor.
Specifications
Great for helping you grip your needle. 10/package.
3489: Schmetz 130/705H-LL LEA-#C 100 Needles Leather Vinyl Point, Size 90/14 |
Our Price: $79.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
This needle features a cutting point. Use on leather, artificial leather, heavy non-woven synthetics.
Do not use on knit or woven fabrics. Can damage fibers. Available in sizes 70/10-110/18.
100 needles per box.
- Bulk 100 Box of Needles
- Has wedge shaped point for sewing Leather
- Not required for synthetic suede
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
Schmetz ABC Pocket Guide to Home Sewing Machine Needles 130/705H
Schmetz Needle Guide Sew Schmetz
Schmetz Needle Guide
Schmetz Product Information, The Domestic Sewing Machine Needle
Schmetz All About Needles, Household, Industrial, Overlock
Schmetz Needle Display Module in Stores
Needles - What the Home Sewer Needs to Know by Web of Thread
3487: Schmetz 130705H-E Red Band Embroidery Machine 100 Needles 75/11 or 90/14 |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
100 needles per box. Embroidery Needles - Box of 100
This needle features a light ball point, wide eye and groove. Use with rayon, polyester and other specialty embroidery threads. The special scarf, widened groove and enlarged eye protect fragile threads and guard against excess friction allowing trouble-free embroidery and decorative stitching. Available in sizes 75, 90.
100 needles per box.
- Box of 100 Needles
- Has larger eye to minimize damage to and breakage of delicate machine embroidery threads
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
Schmetz ABC Pocket Guide to Home Sewing Machine Needles 130/705H
Schmetz Needle Guide Sew Schmetz
Schmetz Needle Guide
Schmetz Product Information, The Domestic Sewing Machine Needle
Schmetz All About Needles, Household, Industrial, Overlock
Schmetz Needle Display Module in Stores
Needles - What the Home Sewer Needs to Know by Web of Thread
3493: Schmetz 130/705H-S Stretch 100 Sewing Machine Needles 75/11 or 80/12 |
Our Price: $74.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the same business day.
Condition: New In Box
|
Features
- Box of 100 Needles
- Size 130 705H-S A100
- Prevents Skipped Stitch
- Prevents damage to knit fabrics which could cause holes or runs. Its rounded point slips between
the fibers rather than cutting them.
Needle Selection Guide
Needle Comparison Chart
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
Knit & Stretch Needles
· Description: Jersey & Stretch needles have medium ball points. The eye &
scarf differ. Use Jersey on knits & some stretch fabrics. Use Stretch on highly
elastic knits. Jersey & Stretch needles are sometimes interchangeable. Test
needle, thread, and fabric combo for stitch quality.
· Needle Names & Sizes: Jersey 70/10, 80/12, 90/14; Stretch 75/11, 90/14.
· Needle Notes: When fabrics contain Lycra®, Spandex or elastic, use the Stretch
needle. For regular knits, use the Jersey needle. Sometimes Stretch and Jersey
needles are interchangeable, but not always. Test. Let stitch quality determine
which needle type and size to use.
7341: Schmetz 130MET Metallic Thread Needles for Home Sewing Machines - 100 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
- Use with metallic threads
- Larger eye creates less wear on delicate metallic treads.
- Use small spools vertically, so the spool spins, therefore not twisting the thread
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
80349: Schmetz 130N TOP-#C Topstitch A100 Sewing Machine Needles Choose Sizes 70/10-110/18 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Top Stitch Needles For Home Machines (HAx130N)
This special needle has a very long, almost double length, eye. It is made for Top-Stitching or Decorative stitching and will accept heavy or multiple threads. It can also be used for embroidery with heavy, metallic threads. It is available in chrome or PD/titanium finish.
Has an extra long eye. For use with topstitch, heavy, multiple or poor quality threads. Achieve perfectly straight stitch lines and even stitches when using a straight stitch plate. Available in sizes 70, 80, 90, 100, 110. 100 needles per box.
The SCHMETZ Topstitch needle has a nickel finishing. This needle has an enlarged eye and a special groove resulting in very straight stitches. It excels in stitching through layered fabrics and quilts. It is especially useful when working with heavy, multiple and even poor quality threads. The SCHMETZ Topstitch needle is available in bulk - 100 needles - in sizes 70, 80, 90, 100 & 110, all sizes are currently available for shipment from our warehouse.
Has an extra large eye and large grooves to accommodate top stitch thread. This needle helps stitch perfectly straight lines and even stitches. It comes in sizes 12/80, 14/90, and 16/100. It is helpful to use a straight stitch plate if you are expecting perfectly straight top stitching results. Choose the size based on the type and size of thread being used.
Needle Selection Guide
Needle Comparison Chart
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
Schmetz ABC Pocket Guide to Home Sewing Machine Needles 130/705H
Schmetz Needle Guide Sew Schmetz
Schmetz Needle Guide
Schmetz Product Information, The Domestic Sewing Machine Needle
Schmetz All About Needles, Household, Industrial, Overlock
Schmetz Needle Display Module in Stores
Needles - What the Home Sewer Needs to Know by Web of Thread
Metallic Thread Embroidery on a Commercial Embroidery Machine
94889: Schmetz SDBXK5-11 Commerical Embroidery Needles DBXK5 sz11/75 10/pkg |
Our Price: $9.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Embroidery needles for single-head and multiple-head automatic embroidery machines, except Brother PR.
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
CANU: 13:80 1. Equivalent Systems: DBX1,16X231, 16X257, 16X95, 1738, 1738A, 287WH, DBX1738, DBX257, DBX95, SY1515, SY2254, SY2270. - Bernina E16
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
61996: Schmetz GOLD-5-75 5-Pack Gold Titanium Embroidery Needles sz11/75 |
Our Price: $7.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
This needle has a Titanium Nitride coating that helps to keep the needle cool… A cool needle results in sewing longer before it gums up. This needle will still dull with usage. It has a light ballpoint. SCHMETZ Gold is the only Titanium Nitride needle available for home sewing. Sizes 75/11.
Slightly rounded point for embroidery on most fabrics. Enlarged eye accommodates special application threads. Titanium Nitride ceramic coating improves needle wear resistance in high stitch count applications and penetration of coarse or densly woven materials. 5 needles per package. Package is not carded.
Here are the four special features of the SCHMETZ Gold needle:
· Titanium Nitride Coating – Helps to keep the needle cool. Resists the sticky adhesives of stabilizers, so the needle does not gum up as fast as a regular needle.
· Large Eye
· Light Ballpoint
· Surpasses High Quality Controls
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
12215: Schmetz NS130N-90 Top Stitch Oversize Eye 100 Sewing Machine Needles Size 90 |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
Top Stitch Needles For Home Machines (HAx130N)
This special needle has a very long, almost double length, eye. It is made for Top-Stitching or Decorative stitching and will accept heavy or multiple threads. It can also be used for embroidery with heavy, metallic threads. It is available in chrome or PD/titanium finish.
Has an extra long eye. For use with topstitch, heavy, multiple or poor quality threads. Achieve perfectly straight stitch lines and even stitches when using a straight stitch plate. Available in sizes 70, 80, 90, 100, 110. 100 needles per box.
The SCHMETZ Topstitch needle has a nickel finishing. This needle has an enlarged eye and a special groove resulting in very straight stitches. It excels in stitching through layered fabrics and quilts. It is especially useful when working with heavy, multiple and even poor quality threads. The SCHMETZ Topstitch needle is available in bulk - 100 needles - in sizes 70, 80, 90, 100 & 110, all sizes are currently available for shipment from our warehouse.
Has an extra large eye and large grooves to accommodate top stitch thread. This needle helps stitch perfectly straight lines and even stitches. It comes in sizes 12/80, 14/90, and 16/100. It is helpful to use a straight stitch plate if you are expecting perfectly straight top stitching results. Choose the size based on the type and size of thread being used.
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
Schmetz ABC Pocket Guide to Home Sewing Machine Needles 130/705H
Schmetz Needle Guide Sew Schmetz
Schmetz Needle Guide
Schmetz Product Information, The Domestic Sewing Machine Needle
Schmetz All About Needles, Household, Industrial, Overlock
Schmetz Needle Display Module in Stores
Needles - What the Home Sewer Needs to Know by Web of Thread
Metallic Thread Embroidery on a Commercial Embroidery Machine
Schmetz S-1711 Schmetz Universal 5-pk Assortment 2 size 10/70, 2 size 12/80 & 1 size 14/90 Sewing Machine Needles |
Our Price: $4.99 Prices are subject to change, and only current prices will be honored.
Availability: Retail Store Only
Condition: New In Box
|
Features
The slightly rounded point allows for trouble free sewing on numerous types of materials including both knits and woven fabrics. A great general purpose needle. System: 130/705 H. Assortment includes: 2 size 10/70, 2 size 12/80 & 1 size 14/90. 5 needles total per pack. Carded.
Non-US Warranty: 30 days parts and labor.
|
Our Price: $4.99 Prices are subject to change, and only current prices will be honored.
Availability: Retail Store Only
Condition: New In Box
|
Features
Schmetz S1720 Machine Embroidery Needles 5-pk sz14/90, 130/705H-E
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
29325: Schmetz S1745 Embroidery Machine Needles 5pk Sz11 |
Our Price: $5.99 Prices are subject to change, and only current prices will be honored.
Availability: Retail Store Only
Condition: New In Box
|
Features
Schmetz Embroidery Needles are designed with a special scarf and large eye to prevent shredding and breakage when sewing with metallic and other machine embroidery threads.
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Schmetz S1824 Embroidery Gold Needles |
Our Price: $69.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
This needle has a Titanium Nitride coating that helps to keep the needle cool… A cool needle results in sewing longer before it gums up. This needle will still dull with usage. It has a light ballpoint. SCHMETZ Gold is the only Titanium Nitride needle available for home sewing. Sizes 75/11 & 90/14.
- 10Pks of 5 Needles
• Slightly rounded point
• Enlarged eye
• Titanium coating resists adhesives from stabilizers which improves needle wear
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
|
Our Price: $69.99 Prices are subject to change, and only current prices will be honored.
Shipping: Free Ground Shipping to the Contiguous USA
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
This needle has a Titanium Nitride coating that helps to keep the needle cool… A cool needle results in sewing longer before it gums up. This needle will still dull with usage. It has a light ballpoint. SCHMETZ Gold is the only Titanium Nitride needle available for home sewing. Sizes 75/11 & 90/14.
- 10Pks of 5 Needles
• Slightly rounded point
• Enlarged eye
• Titanium coating resists adhesives from stabilizers which improves needle wear
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
25456: Schmetz SCH-N Super Big Sewing Machine Needle, 15 - 17" Long |
Our Price: $99.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
A Great Educational Tool! We still have a few SCHMETZ "Super" Needles available. Yes, they are expensive, but you only need one.
You asked for it! The SCHMETZ "SUPER" Needle is back! Approximately 15''(at needle) to 17"(from base) tall, this large-scale household needle is eleven times the size of a regular home sewing needle. Spiff up your sewing room with a large-scale model of your favorite sewing machine needle. The SUPER Needle is great for class demos. The "SUPER" needle is structurally correct to how the details that make each SCHMETZ needle an engineering marvel and a sewing room essential! Needle is made of a metal alloy. Includes needle model, wood base, and wing nut (to attach to base).
- Great for Classroom or In-Store Display
- Structurally Correct
- Made of a Metal Alloy
- Sits on a 5" Wooden Base
INTERNATIONAL CUSTOMERS PLEASE NOTE: Due to weight and size, this item incurs an additional $15.00 Shipping Fee per order PLUS International Shipping Charges.
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
|
Our Price: $49.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
*For Brother 901 1201, Melco Amaya Bravo & EP4, Janome MB4, Tajima, Baruden, Toyota, SWF Sunstar, Happy, Highlead, Renaissance, Ricoma, Prodigy, Generation, Meistergram, Etc.
Schmetz SDBXK5 is Available in sizes: 10, 11, 12, 14, and 16. Needles are sold in boxes of 100 only. When ordering please specify the number of boxes, not the total number of needles (i.e., quantity of 2 = 200 needles).
Click HERE for Schmetz Special Needles for Embroidery Machines .pdf
New announcement from Schmetz below! You will know they are chrome needles because it will be listed on the package. Coming late 2021!
Non-US Warranty: 30 days parts and labor.
Specifications
DBxK5 needles work with industrial embroidery machines that take round shank needles such as Tajima, SWF Sumstar, ZSK Germany, Barudan, Melco, Amaya, Bravo, Happy, Janome MB4 EP4, Toyota, Brother 901 1201, Highlead, Renaissance, Ricoma, Generation, Meistergram, Etx.
Choosing the right needle is important to ensure quality stitches. Embroidering with a needle that
is too small or too big for the thread and/or fabric may result in thread breaks or skipped stitches.
There are three things to consider when choosing the right needle for the job: fi nish, size and point.
DBxK5 is an established standard system for machine embroidery. This style needle has a medium
point with a larger eye, which allows the thread to fl ow smoothly and helps reduce thread breaks. Its
only downfall is that it is slightly less durable due to its thinner eye wall. For stretch materials, use
ballpoints. For cottons, use sharp-points.
DBx7ST is ideal for metallic threads. It has an extremely large rectangular eye that allows for easy
passage of thread. You may also use size 80/12 needles for metallic threads.
7996: Singer 200014BZ05 5Pk Embroidery Machine Needles Size 14 Chrome Plated |
Our Price: $4.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse on the next business day.
Condition: New In Box
|
Features
- These are the only embroidery needles recommended for the Singer XL100, XL150, XL1000, XL 5000 and XL 6000 Embroidery Machines, Quantum, Quartet, Futura, Superb, Legacy,
- Use size 14 for heavier fabrics.
Non-US Warranty: 30 days parts and labor.
85630: Triumph B351110 Flat Shank Embroidery Machine Needles HAX1 LE EBBR SES Light Ball or Sharp Point 100 |
Our Price: $39.99 Prices are subject to change, and only current prices will be honored.
Availability: Usually leaves the warehouse in 2-3 business days.
Condition: New In Box
|
Features
The most popular sizes in both sharp and light ball point varieties for ANY single- or multi-needle embroidery machine that uses flat shank needles. Chrome-plated and compatible with automatic threading systems, you’ll love these needles.
Available sizes:
#65/9 Sharp Point HAX1 LE EBBR
#65/9 Light Ball Point HAX1 LE EBBR
#75/11 Sharp Point HAX1 LE EBBR
#75/11 Light Ball Point HAX1 LE EBBR
#85/13 Sharp Point HAX1 LE EBBR
#85/13 Light Ball Point HAX1 LE EBBR
#90/14 Sharp Point HAX1 LE EBBR
#90/14 Light Ball Point HAX1 LE EBBR
Non-US Warranty: 30 days parts and labor.
Specifications
EBBR SES Light Ball Point
Size 75/11 or 90/14 Needles
General purpose needle, particularly knit fabrics, standard embroidery thread.
EBBR Sharp Point
Size 75/11 or 90/14 Needles
Clean penetration for woven fabrics, including finished caps, quilting cottons and webbing.
Triumph Titanium Needles
Needles by DIMEIn this video you will learn through a comprehensive guide why DIME's chrome plated needles are the best needles for any embroidery machine!
Copyright © 1995-2024 AllBrands.com.
SewingMachineStore and SewingMachineStore.com are property and trademarks
of AllBrands, LLC, dba AllBrands.com. All Rights Reserved.